release/src/Makefile

   1 #
   2 # Toplevel Makefile for the BCM947xx Linux Router release
   3 #
   4 # Copyright 2005, Broadcom Corporation
   5 # All Rights Reserved.
   6 #
   7 # THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   8 # KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
   9 # SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  10 # FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  11 #
  12 # $Id: Makefile,v 1.53 2005/04/25 03:54:37 tallest Exp $
  13 #
  14
  15 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  16
  17 # To rebuild everything and all configurations:
  18 #  make distclean
  19 #  make V1=whatever V2=sub-whatever VPN=vpn3.6 a b c d m
  20 # The 1st "whatever" would be the build number, the sub-whatever would
  21 #       be the update to the version.
  22 #
  23 # Example:
  24 # make V1=8516 V2="-jffs.1" a b c d m s
  25
  26 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  27
  28
  29
  30 export SRCBASE := $(shell pwd)
  31 RELEASEDIR := $(shell (cd $(SRCBASE)/.. && pwd -P))
  32 PATH := $(RELEASEDIR)/tools:$(PATH)
  33 export TPROFILE := N
  34
  35 include ./target.mak
  36
  37 # Normally you'd do something like "make V1=8516 V2=-sub-ver a b c d"
  38 # But if you don't give anything for "V1", it'll get a default from tomato_version.
  39 current_TOMATO_V1 ?= "--def"
  40 VPN ?= "VPN"
  41 NC ?="NOCAT"
  42 ifeq ($(CONFIG_LINUX26),y)
  43 ND = "K26"
  44 else
  45 ND = "ND"
  46 endif
  47 SNMP ?= "n"
  48 VLAN ?= "n"
  49 USERPPTP ?= "n"
  50 PPTPD ?= "n"
  51 TCPDUMP ?= "n"
  52
  53 ifeq ($(NVRAM_SIZE),)
  54 NVRAM_SIZE = 0
  55 endif
  56
  57 ifeq ($(VLAN),y)
  58 EXTRA_PREDESC = 'VLAN-'
  59 else
  60 EXTRA_PREDESC = ''
  61 endif
  62
  63 -include tomato_profile.mak
  64
  65 # This could be simpler by just using $(TOMATO_PROFILE_NAME) like it used to be,
  66 # but that's fragile.  If you make one certain innocuous change elsewhere in the
  67 # makefile(s), the build will silently be wrong.  This way it works properly every time.
  68 current_BUILD_NAME = $(strip $(shell grep "^TOMATO_BUILD_NAME" tomato_profile.mak  | cut -d"=" -f2))
  69 current_BUILD_DESC = $(strip $(shell grep "^TOMATO_BUILD_DESC" tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  70 current_BUILD_USB  = $(strip $(shell grep "^TOMATO_BUILD_USB"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  71 current_TOMATO_VER = $(strip $(shell grep "TOMATO_MAJOR" router/shared/tomato_version.h  | cut -d"\"" -f2)).$(strip $(shell grep "TOMATO_MINOR" router/shared/tomato_version.h  | cut -d"\"" -f2))
  72 current_TOMATO_MIPS32 = $(strip $(shell grep "^TOMATO_BUILD_MIPS32"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g" | sed -e "s/\"//g" ))
  73 current_TOMATO_V1 = $(strip $(shell grep "^TOMATO_BUILD_V1"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g" | sed -e "s/\"//g" ))
  74 current_TOMATO_V2 = $(strip $(shell grep "^TOMATO_BUILD_V2"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g" | sed -e "s/\"//g" ))
  75 current_TOMATO_B = $(strip $(shell grep "^TOMATO_BUILD_NAME"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g" | sed -e "s/\"//g" ))
  76 current_TOMATO_N = $(strip $(shell grep "^TOMATO_PROFILE_NAME"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g" | sed -e "s/\"//g" ))
  77 N=$(current_TOMATO_N)
  78 B=$(current_TOMATO_B)
  79
  80 uppercase_N = $(shell echo $(N) | tr a-z  A-Z)
  81 lowercase_N = $(shell echo $(N) | tr A-Z a-z)
  82 uppercase_B = $(shell echo $(B) | tr a-z  A-Z)
  83 lowercase_B = $(shell echo $(B) | tr A-Z a-z)
  84
  85 ifeq ($(CONFIG_LINUX26),y)
  86 mips_rev = $(if $(filter $(current_TOMATO_MIPS32),r2),MIPSR2,MIPSR1)
  87
  88 KERN_SIZE_OPT ?= n
  89 else
  90 mips_rev =
  91 KERN_SIZE_OPT ?= y
  92 endif
  93
  94 beta = $(if $(filter $(TOMATO_EXPERIMENTAL),1),-beta,)
  95
  96 tomato_ver:
  97         @echo ""
  98         @btools/uversion.pl --gen $(current_TOMATO_V1) $(mips_rev)$(beta)$(current_TOMATO_V2) $(ND) $(current_BUILD_USB) $(current_BUILD_DESC)
  99
 100 ifeq ($(TOMATO_BUILD),)
 101
 102 all:
 103         $(MAKE) a
 104
 105 else
 106
 107 all: tomato_ver
 108         @echo ""
 109         @echo "Building Tomato $(ND) $(current_BUILD_USB) $(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2) $(current_BUILD_DESC) $(current_BUILD_NAME) with $(TOMATO_PROFILE_NAME) Profile"
 110
 111         @echo ""
 112         @echo ""
 113
 114         @-mkdir image
 115         @$(MAKE) -C router all
 116         @$(MAKE) -C router install
 117         @$(MAKE) -C btools
 118
 119         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).trx
 120         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 121 ifeq ($(WRT54),y)
 122 ifneq ($(MIPS32),r2)
 123         @rm -f image/tomato-WRT54*$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 124         @rm -f image/tomato-WRTSL54*$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 125         @rm -f image/tomato-WR850G$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 126 endif
 127 endif
 128 ifeq ($(LINKSYS_E),y)
 129         @rm -f image/tomato-E??00$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 130 endif
 131 ifeq ($(BELKIN),y)
 132 ifneq ($(NVRAM_SIZE),60)
 133         @rm -f image/tomato-F7D????$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 134         @rm -f image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 135 endif
 136 endif
 137         @echo "" >>fpkg.log
 138         @echo "***********************" `date` "************************" >>fpkg.log
 139         @cat router/shared/tomato_version >>fpkg.log
 140         @echo "" >>fpkg.log
 141         @cat router/target.info >>fpkg.log
 142 ifeq ($(WRT54),y)
 143 ifneq ($(current_TOMATO_MIPS32),r2)
 144         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 145                 -l W54G,image/tomato-WRT54G_WRT54GL$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 146                 -l W54S,image/tomato-WRT54GS$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 147                 -l W54s,image/tomato-WRT54GSv4$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 148                 -l W54U,image/tomato-WRTSL54GS$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 149                 -m 0x10577050,image/tomato-WR850G$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 150                 | tee -a fpkg.log
 151 endif
 152 endif
 153 ifeq ($(LINKSYS_E),y)
 154         # Linksys E-series images
 155         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 156                 -l 4200,image/tomato-E4200$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 157                 -l 61XN,image/tomato-E3000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 158                 -l 32XN,image/tomato-E2000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 159                 | tee -a fpkg.log
 160 endif
 161 ifeq ($(BELKIN),y)
 162 ifneq ($(NVRAM_SIZE),60)
 163         # Create Belkin images
 164         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 165                 -b 0x20100322,image/tomato-F7D3301$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 166                 -b 0x20090928,image/tomato-F7D3302$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 167                 -b 0x20091006,image/tomato-F7D4302$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 168                 -b 0x00017116,image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 169                 | tee -a fpkg.log
 170 endif
 171 endif
 172         # Create generic TRX image
 173         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 174                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).trx \
 175                 | tee -a fpkg.log
 176
 177         @cp fpkg.log image/fpkg-$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2).log
 178         @echo ""
 179         @echo "-----------------"
 180         @echo `cat router/shared/tomato_version` " ready"
 181         @echo "-----------------"
 182 ifneq ($(NOVERSION),1)
 183         @cp router/shared/tomato_version router/shared/tomato_version_last
 184         @btools/uversion.pl --bump
 185 endif
 186 endif
 187
 188
 189
 190 clean:
 191         @touch router/.config
 192         @rm -f router/config_[a-z]
 193         @rm -f router/busybox/config_[a-z]
 194         @$(MAKE) -C router $@
 195         @-rmdir router/mipsel-uclibc
 196
 197 cleanimage:
 198         @rm -f fpkg.log
 199         @rm -fr image/*
 200         @rm -f router/.config
 201         @touch router/.config
 202         @-mkdir image
 203
 204 cleantools:
 205         @$(MAKE) -C $(LINUXDIR)/scripts/squashfs clean
 206         @$(MAKE) -C btools clean
 207
 208 cleankernel:
 209         @cd $(LINUXDIR) && \
 210         mv .config save-config && \
 211         $(MAKE) distclean || true; \
 212         cp -p save-config .config || true
 213
 214 kernel:
 215         @$(MAKE) -C router kernel
 216         @ls -l $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/zImage
 217
 218 distclean: clean cleanimage cleankernel cleantools
 219 ifneq ($(INSIDE_MAK),1)
 220         @$(MAKE) -C router $@ INSIDE_MAK=1
 221 endif
 222         mv router/busybox/.config busybox-saved-config || true
 223         @$(MAKE) -C router/busybox distclean
 224         @rm -f router/busybox/config_current
 225         @cp -p busybox-saved-config router/busybox/.config || true
 226         @cp -p router/busybox/.config  router/busybox/config_current || true
 227         @rm -f router/config_current
 228         @rm -f router/.config.cmd router/.config.old router/.config
 229         @rm -f router/libfoo_xref.txt
 230         @rm -f tomato_profile.mak router/shared/tomato_profile.h
 231         @touch tomato_profile.mak
 232         @touch router/shared/tomato_profile.h
 233
 234
 235 prepk:
 236         @cd $(LINUXDIR) ; \
 237                 rm -f config_current ; \
 238                 ln -s config_base config_current ; \
 239                 cp -f config_current .config
 240         $(MAKE) -C $(LINUXDIR) oldconfig
 241 ifneq ($(CONFIG_LINUX26),y)
 242         $(MAKE) -C $(LINUXDIR) dep
 243 endif
 244
 245 what:
 246         @echo ""
 247         @echo "$(current_BUILD_DESC)-$(current_BUILD_NAME)-$(TOMATO_PROFILE_NAME) Profile"
 248         @echo ""
 249
 250
 251 # The methodology for making the different builds is to
 252 # copy the "base" config file to the "target" config file in
 253 # the appropriate directory, and then edit it by removing and
 254 # inserting the desired configuration lines.
 255 # You can't just delete the "whatever=y" line, you must have
 256 # a "...is not set" line, or the make oldconfig will stop and ask
 257 # what to do.
 258
 259 # Options for "make bin" :
 260 # BUILD_DESC (Std|Lite|Ext|...)
 261 # MIPS32 (r2|r1)
 262 # KERN_SIZE_OPT
 263 # USB ("USB"|"")
 264 # JFFSv1 | NO_JFFS
 265 # NO_CIFS, NO_SSH, NO_ZEBRA, NO_SAMBA, NO_HTTPS, NO_XXTP, NO_LIBOPT, NO_FTP
 266 # SAMBA3, OPENVPN, IPV6SUPP, EBTABLES, NTFS, MEDIASRV, BBEXTRAS, USBEXTRAS, BCM57, SLIM
 267 # NOCAT
 268 # SNMP
 269 # HFS
 270 # USERPPTP
 271 # VLAN
 272
 273 define RouterOptions
 274         @( \
 275         if [ "$(CONFIG_LINUX26)" = "y" ] || [ "$(SAMBA3)" = "y" ]; then \
 276                 sed -i "/TCONFIG_SAMBA3/d" $(1); \
 277                 echo "TCONFIG_SAMBA3=y" >>$(1); \
 278         fi; \
 279         sed -i "/TCONFIG_EMF/d" $(1); \
 280         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 281                 if [ "$(SLIM)" = "y" ]; then \
 282                         echo "# TCONFIG_EMF is not set" >>$(1); \
 283                 else \
 284                         echo "TCONFIG_EMF=y" >>$(1); \
 285                 fi; \
 286         else \
 287                 echo "# TCONFIG_EMF is not set" >>$(1); \
 288         fi; \
 289         sed -i "/TCONFIG_JFFSV1/d" $(1); \
 290         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 291                 if [ "$(JFFSv1)" = "y" ]; then \
 292                         echo "TCONFIG_JFFSV1=y" >>$(1); \
 293                 else \
 294                         echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 295                 fi; \
 296         else \
 297                 echo "TCONFIG_JFFSV1=y" >>$(1); \
 298         fi; \
 299         if [ "$(USB)" = "USB" ]; then \
 300                 sed -i "/TCONFIG_USB is not set/d" $(1); \
 301                 echo "TCONFIG_USB=y" >>$(1); \
 302                 if [ "$(USBEXTRAS)" = "y" ]; then \
 303                         sed -i "/TCONFIG_USB_EXTRAS/d" $(1); \
 304                         echo "TCONFIG_USB_EXTRAS=y" >>$(1); \
 305                 fi; \
 306                 if [ "$(NTFS)" = "y" ]; then \
 307                         sed -i "/TCONFIG_NTFS/d" $(1); \
 308                         echo "TCONFIG_NTFS=y" >>$(1); \
 309                 fi; \
 310                 if [ "$(MEDIASRV)" = "y" ]; then \
 311                         sed -i "/TCONFIG_MEDIA_SERVER/d" $(1); \
 312                         echo "TCONFIG_MEDIA_SERVER=y" >>$(1); \
 313                 fi; \
 314         else \
 315                 sed -i "/TCONFIG_USB=y/d" $(1); \
 316                 echo "# TCONFIG_USB is not set" >>$(1); \
 317         fi; \
 318         if [ "$(NO_SAMBA)" = "y" ]; then \
 319                 sed -i "/TCONFIG_SAMBASRV/d" $(1); \
 320                 echo "# TCONFIG_SAMBASRV is not set" >>$(1); \
 321         fi; \
 322         if [ "$(NO_ZEBRA)" = "y" ]; then \
 323                 sed -i "/TCONFIG_ZEBRA/d" $(1); \
 324                 echo "# TCONFIG_ZEBRA is not set" >>$(1); \
 325         fi; \
 326         if [ "$(NO_JFFS)" = "y" ]; then \
 327                 sed -i "/TCONFIG_JFFS2/d" $(1); \
 328                 echo "# TCONFIG_JFFS2 is not set" >>$(1); \
 329                 sed -i "/TCONFIG_JFFSV1/d" $(1); \
 330                 echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 331         fi; \
 332         if [ "$(NO_CIFS)" = "y" ]; then \
 333                 sed -i "/TCONFIG_CIFS/d" $(1); \
 334                 echo "# TCONFIG_CIFS is not set" >>$(1); \
 335         fi; \
 336         if [ "$(NO_FTP)" = "y" ]; then \
 337                 sed -i "/TCONFIG_FTP/d" $(1); \
 338                 echo "# TCONFIG_FTP is not set" >>$(1); \
 339         fi; \
 340         if [ "$(NO_SSH)" = "y" ]; then \
 341                 sed -i "/TCONFIG_SSH/d" $(1); \
 342                 echo "# TCONFIG_SSH is not set" >>$(1); \
 343         fi; \
 344         if [ "$(NO_HTTPS)" = "y" ]; then \
 345                 sed -i "/TCONFIG_HTTPS/d" $(1); \
 346                 echo "# TCONFIG_HTTPS is not set" >>$(1); \
 347         fi; \
 348         if [ "$(NO_XXTP)" = "y" ]; then \
 349                 sed -i "/TCONFIG_L2TP/d" $(1); \
 350                 echo "# TCONFIG_L2TP is not set" >>$(1); \
 351                 sed -i "/TCONFIG_PPTP/d" $(1); \
 352                 echo "# TCONFIG_PPTP is not set" >>$(1); \
 353         fi; \
 354         if [ "$(NO_LIBOPT)" = "y" ]; then \
 355                 sed -i "/TCONFIG_OPTIMIZE_SHARED_LIBS/d" $(1); \
 356                 echo "# TCONFIG_OPTIMIZE_SHARED_LIBS is not set" >>$(1); \
 357         fi; \
 358         if [ "$(EBTABLES)" = "y" ]; then \
 359                 sed -i "/TCONFIG_EBTABLES/d" $(1); \
 360                 echo "TCONFIG_EBTABLES=y" >>$(1); \
 361         fi; \
 362         if [ "$(IPV6SUPP)" = "y" ]; then \
 363                 sed -i "/TCONFIG_IPV6/d" $(1); \
 364                 echo "TCONFIG_IPV6=y" >>$(1); \
 365         fi; \
 366         if [ "$(NOCAT)" = "y" ]; then \
 367                 sed -i "/TCONFIG_NOCAT/d" $(1); \
 368                 echo "TCONFIG_NOCAT=y" >>$(1); \
 369         fi; \
 370         if [ "$(OPENVPN)" = "y" ]; then \
 371                 sed -i "/TCONFIG_LZO/d" $(1); \
 372                 echo "TCONFIG_LZO=y" >>$(1); \
 373                 sed -i "/TCONFIG_OPENVPN/d" $(1); \
 374                 echo "TCONFIG_OPENVPN=y" >>$(1); \
 375                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 376                         sed -i "/TCONFIG_FTP_SSL/d" $(1); \
 377                         echo "TCONFIG_FTP_SSL=y" >>$(1); \
 378                 fi; \
 379         fi; \
 380         if [ "$(HFS)" = "y" ]; then \
 381                 sed -i "/TCONFIG_HFS/d" $(1); \
 382                 echo "TCONFIG_HFS=y" >>$(1); \
 383         fi; \
 384         if [ "$(SNMP)" = "y" ]; then \
 385                 sed -i "/TCONFIG_SNMP/d" $(1); \
 386                 echo "TCONFIG_SNMP=y" >>$(1); \
 387         fi; \
 388         if [ "$(USERPPTP)" = "y" ]; then \
 389                 sed -i "/TCONFIG_USERPPTP/d" $(1); \
 390                 echo "TCONFIG_USERPPTP=y" >>$(1); \
 391         fi; \
 392         if [ "$(VLAN)" = "y" ]; then \
 393                 sed -i "/TCONFIG_VLAN/d" $(1); \
 394                 echo "TCONFIG_VLAN=y" >>$(1); \
 395         fi; \
 396         if [ "$(PPTPD)" = "y" ]; then \
 397                 sed -i "/TCONFIG_PPTPD/d" $(1); \
 398                 echo "TCONFIG_PPTPD=y" >>$(1); \
 399         fi; \
 400         if [ "$(TCPDUMP)" = "y" ]; then \
 401                 sed -i "/TCONFIG_TCPDUMP/d" $(1); \
 402                 echo "TCONFIG_TCPDUMP=y" >>$(1); \
 403         fi; \
 404         )
 405 endef
 406
 407 define BusyboxOptions
 408         @( \
 409         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 410                 sed -i "/CONFIG_FEATURE_2_4_MODULES/d" $(1); \
 411                 echo "# CONFIG_FEATURE_2_4_MODULES is not set" >>$(1); \
 412                 sed -i "/CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT/d" $(1); \
 413                 echo "CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y" >>$(1); \
 414                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 415                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 416                 sed -i "/CONFIG_MKNOD/d" $(1); \
 417                 echo "CONFIG_MKNOD=y" >>$(1); \
 418                 sed -i "/CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE/d" $(1); \
 419                 echo "CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=512" >>$(1); \
 420         fi; \
 421         if [ "$(NO_CIFS)" = "y" ]; then \
 422                 sed -i "/CONFIG_FEATURE_MOUNT_CIFS/d" $(1); \
 423                 echo "# CONFIG_FEATURE_MOUNT_CIFS is not set" >>$(1); \
 424         fi; \
 425         if [ "$(BBEXTRAS)" = "y" ]; then \
 426                 sed -i "/CONFIG_SENDMAIL/d" $(1); \
 427                 echo "CONFIG_SENDMAIL=y" >>$(1); \
 428                 sed -i "/CONFIG_FEATURE_SORT_BIG/d" $(1); \
 429                 echo "CONFIG_FEATURE_SORT_BIG=y" >>$(1); \
 430                 sed -i "/CONFIG_FTPPUT/d" $(1); \
 431                 echo "CONFIG_FTPPUT=y" >>$(1); \
 432                 sed -i "/CONFIG_FTPGET/d" $(1); \
 433                 echo "CONFIG_FTPGET=y" >>$(1); \
 434                 sed -i "/CONFIG_CLEAR/d" $(1); \
 435                 echo "CONFIG_CLEAR=y" >>$(1); \
 436                 sed -i "/CONFIG_NICE/d" $(1); \
 437                 echo "CONFIG_NICE=y" >>$(1); \
 438                 sed -i "/CONFIG_SETCONSOLE/d" $(1); \
 439                 echo "CONFIG_SETCONSOLE=y" >>$(1); \
 440                 sed -i "/CONFIG_MKFIFO/d" $(1); \
 441                 echo "CONFIG_MKFIFO=y" >>$(1); \
 442         fi; \
 443         if [ "$(USB)" = "USB" ]; then \
 444                 if [ "$(USBEXTRAS)" = "y" ]; then \
 445                         sed -i "/CONFIG_E2FSCK/d" $(1); \
 446                         echo "CONFIG_E2FSCK=y" >>$(1); \
 447                         sed -i "/CONFIG_MKE2FS/d" $(1); \
 448                         echo "CONFIG_MKE2FS=y" >>$(1); \
 449                         sed -i "/CONFIG_FDISK/d" $(1); \
 450                         echo "CONFIG_FDISK=y" >>$(1); \
 451                         sed -i "/CONFIG_FEATURE_FDISK_WRITABLE/d" $(1); \
 452                         echo "CONFIG_FEATURE_FDISK_WRITABLE=y" >>$(1); \
 453                         sed -i "/CONFIG_MKFS_VFAT/d" $(1); \
 454                         echo "CONFIG_MKFS_VFAT=y" >>$(1); \
 455                         sed -i "/CONFIG_MKSWAP/d" $(1); \
 456                         echo "CONFIG_MKSWAP=y" >>$(1); \
 457                         sed -i "/CONFIG_FLOCK/d" $(1); \
 458                         echo "CONFIG_FLOCK=y" >>$(1); \
 459                         sed -i "/CONFIG_FSYNC/d" $(1); \
 460                         echo "CONFIG_FSYNC=y" >>$(1); \
 461                         sed -i "/CONFIG_TUNE2FS/d" $(1); \
 462                         echo "CONFIG_TUNE2FS=y" >>$(1); \
 463                         sed -i "/CONFIG_E2LABEL/d" $(1); \
 464                         echo "CONFIG_E2LABEL=y" >>$(1); \
 465                         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 466                                 sed -i "/CONFIG_LSUSB/d" $(1); \
 467                                 echo "CONFIG_LSUSB=y" >>$(1); \
 468                                 sed -i "/CONFIG_FEATURE_WGET_STATUSBAR/d" $(1); \
 469                                 echo "CONFIG_FEATURE_WGET_STATUSBAR=y" >>$(1); \
 470                                 sed -i "/CONFIG_FEATURE_VERBOSE_USAGE/d" $(1); \
 471                                 echo "CONFIG_FEATURE_VERBOSE_USAGE=y" >>$(1); \
 472                         fi; \
 473                 fi; \
 474         else \
 475                 sed -i "/CONFIG_FEATURE_MOUNT_LOOP/d" $(1); \
 476                 echo "# CONFIG_FEATURE_MOUNT_LOOP is not set" >>$(1); \
 477                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 478                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 479                 sed -i "/CONFIG_FEATURE_MOUNT_LABEL/d" $(1); \
 480                 echo "# CONFIG_FEATURE_MOUNT_LABEL is not set" >>$(1); \
 481                 sed -i "/CONFIG_FEATURE_MOUNT_FSTAB/d" $(1); \
 482                 echo "# CONFIG_FEATURE_MOUNT_FSTAB is not set" >>$(1); \
 483                 sed -i "/CONFIG_VOLUMEID/d" $(1); \
 484                 echo "# CONFIG_VOLUMEID is not set" >>$(1); \
 485                 sed -i "/CONFIG_BLKID/d" $(1); \
 486                 echo "# CONFIG_BLKID is not set" >>$(1); \
 487                 sed -i "/CONFIG_SWAPONOFF/d" $(1); \
 488                 echo "# CONFIG_SWAPONOFF is not set" >>$(1); \
 489                 sed -i "/CONFIG_CHROOT/d" $(1); \
 490                 echo "# CONFIG_CHROOT is not set" >>$(1); \
 491                 sed -i "/CONFIG_PIVOT_ROOT/d" $(1); \
 492                 echo "# CONFIG_PIVOT_ROOT is not set" >>$(1); \
 493                 sed -i "/CONFIG_TRUE/d" $(1); \
 494                 echo "# CONFIG_TRUE is not set" >>$(1); \
 495         fi; \
 496         if [ "$(IPV6SUPP)" = "y" ]; then \
 497                 sed -i "/CONFIG_FEATURE_IPV6/d" $(1); \
 498                 echo "CONFIG_FEATURE_IPV6=y" >>$(1); \
 499                 sed -i "/CONFIG_PING6/d" $(1); \
 500                 echo "CONFIG_PING6=y" >>$(1); \
 501                 sed -i "/CONFIG_TRACEROUTE6/d" $(1); \
 502                 echo "CONFIG_TRACEROUTE6=y" >>$(1); \
 503                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 504                         sed -i "/CONFIG_FEATURE_UDHCP_RFC5969/d" $(1); \
 505                         echo "CONFIG_FEATURE_UDHCP_RFC5969=y" >>$(1); \
 506                 fi; \
 507         fi; \
 508         if [ "$(SLIM)" = "y" ]; then \
 509                 sed -i "/CONFIG_AWK/d" $(1); \
 510                 echo "# CONFIG_AWK is not set" >>$(1); \
 511                 sed -i "/CONFIG_BASENAME/d" $(1); \
 512                 echo "# CONFIG_BASENAME is not set" >>$(1); \
 513                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 514                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 515                 sed -i "/CONFIG_BLKID/d" $(1); \
 516                 echo "# CONFIG_BLKID is not set" >>$(1); \
 517                 sed -i "/CONFIG_TELNET=y/d" $(1); \
 518                 echo "# CONFIG_TELNET is not set" >>$(1); \
 519                 sed -i "/CONFIG_ARPING/d" $(1); \
 520                 echo "# CONFIG_ARPING is not set" >>$(1); \
 521                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 522                 echo "# CONFIG_FEATURE_LS_COLOR is not set" >>$(1); \
 523                 sed -i "/CONFIG_CHOWN/d" $(1); \
 524                 echo "# CONFIG_CHOWN is not set" >>$(1); \
 525         else \
 526                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 527                 echo "CONFIG_FEATURE_LS_COLOR=y" >>$(1); \
 528                 sed -i "/CONFIG_FEATURE_LS_COLOR_IS_DEFAULT/d" $(1); \
 529                 echo "CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y" >>$(1); \
 530         fi; \
 531         )
 532 endef
 533
 534 define KernelConfig
 535         @( \
 536         sed -i "/CONFIG_NVRAM_SIZE/d" $(1); \
 537         echo "CONFIG_NVRAM_SIZE="$(NVRAM_SIZE) >>$(1); \
 538         sed -i "/CONFIG_CC_OPTIMIZE_FOR_SIZE/d" $(1); \
 539         if [ "$(KERN_SIZE_OPT)" = "y" ]; then \
 540                 echo "CONFIG_CC_OPTIMIZE_FOR_SIZE=y" >>$(1); \
 541         else \
 542                 echo "# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set" >>$(1); \
 543         fi; \
 544         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(MIPS32)" = "r2" ]; then \
 545                 sed -i "/CONFIG_CPU_MIPS32_R1/d" $(1); \
 546                 echo "# CONFIG_CPU_MIPS32_R1 is not set" >>$(1); \
 547                 sed -i "/CONFIG_CPU_MIPS32_R2/d" $(1); \
 548                 echo "CONFIG_CPU_MIPS32_R2=y" >>$(1); \
 549                 sed -i "/CONFIG_CPU_MIPSR1/d" $(1); \
 550                 echo "CONFIG_CPU_MIPSR2=y" >>$(1); \
 551         fi; \
 552         if [ "$(USB)" = "" ]; then \
 553                 sed -i "/CONFIG_EFI_PARTITION/d" $(1); \
 554                 echo "# CONFIG_EFI_PARTITION is not set" >>$(1); \
 555         fi; \
 556         if [ "$(IPV6SUPP)" = "y" ]; then \
 557                 sed -i "/CONFIG_IPV6 is not set/d" $(1); \
 558                 echo "CONFIG_IPV6=y" >>$(1); \
 559                 sed -i "/CONFIG_IP6_NF_IPTABLES/d" $(1); \
 560                 echo "CONFIG_IP6_NF_IPTABLES=y" >>$(1); \
 561                 sed -i "/CONFIG_IP6_NF_MATCH_RT/d" $(1); \
 562                 echo "CONFIG_IP6_NF_MATCH_RT=y" >>$(1); \
 563                 sed -i "/CONFIG_IP6_NF_FILTER/d" $(1); \
 564                 echo "CONFIG_IP6_NF_FILTER=m" >>$(1); \
 565                 sed -i "/CONFIG_IP6_NF_TARGET_LOG/d" $(1); \
 566                 echo "CONFIG_IP6_NF_TARGET_LOG=m" >>$(1); \
 567                 sed -i "/CONFIG_IP6_NF_TARGET_REJECT/d" $(1); \
 568                 echo "CONFIG_IP6_NF_TARGET_REJECT=m" >>$(1); \
 569                 sed -i "/CONFIG_IP6_NF_MANGLE/d" $(1); \
 570                 echo "CONFIG_IP6_NF_MANGLE=m" >>$(1); \
 571                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 572                         sed -i "/CONFIG_NF_CONNTRACK_IPV6/d" $(1); \
 573                         echo "CONFIG_NF_CONNTRACK_IPV6=m" >>$(1); \
 574                         sed -i "/CONFIG_NETFILTER_XT_MATCH_HL/d" $(1); \
 575                         echo "CONFIG_NETFILTER_XT_MATCH_HL=m" >>$(1); \
 576                         sed -i "/CONFIG_IPV6_ROUTER_PREF/d" $(1); \
 577                         echo "CONFIG_IPV6_ROUTER_PREF=y" >>$(1); \
 578                         sed -i "/CONFIG_IPV6_SIT/d" $(1); \
 579                         echo "CONFIG_IPV6_SIT=m" >>$(1); \
 580                         sed -i "/CONFIG_IPV6_SIT_6RD/d" $(1); \
 581                         echo "CONFIG_IPV6_SIT_6RD=y" >>$(1); \
 582                         sed -i "/CONFIG_IPV6_MULTIPLE_TABLES/d" $(1); \
 583                         echo "CONFIG_IPV6_MULTIPLE_TABLES=y" >>$(1); \
 584                         sed -i "/CONFIG_IP6_NF_RAW/d" $(1); \
 585                         echo "CONFIG_IP6_NF_RAW=m" >>$(1); \
 586                         sed -i "/CONFIG_IPV6_OPTIMISTIC_DAD/d" $(1); \
 587                         echo "CONFIG_IPV6_OPTIMISTIC_DAD=y" >>$(1); \
 588                         sed -i "/CONFIG_IPV6_MROUTE/d" $(1); \
 589                         echo "CONFIG_IPV6_MROUTE=y" >>$(1); \
 590                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 591                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 592                 else \
 593                         sed -i "/CONFIG_IP6_NF_CONNTRACK/d" $(1); \
 594                         echo "CONFIG_IP6_NF_CONNTRACK=m" >>$(1); \
 595                         sed -i "/CONFIG_IP6_NF_MATCH_HL/d" $(1); \
 596                         echo "CONFIG_IP6_NF_MATCH_HL=m" >>$(1); \
 597                         sed -i "/CONFIG_IP6_NF_FTP/d" $(1); \
 598                         echo "CONFIG_IP6_NF_FTP=m" >>$(1); \
 599                         sed -i "/CONFIG_IP6_NF_MATCH_LIMIT/d" $(1); \
 600                         echo "CONFIG_IP6_NF_MATCH_LIMIT=m" >>$(1); \
 601                         sed -i "/CONFIG_IP6_NF_MATCH_CONDITION/d" $(1); \
 602                         echo "CONFIG_IP6_NF_MATCH_CONDITION=m" >>$(1); \
 603                         sed -i "/CONFIG_IP6_NF_MATCH_MAC/d" $(1); \
 604                         echo "CONFIG_IP6_NF_MATCH_MAC=m" >>$(1); \
 605                         sed -i "/CONFIG_IP6_NF_MATCH_MULTIPORT/d" $(1); \
 606                         echo "CONFIG_IP6_NF_MATCH_MULTIPORT=m" >>$(1); \
 607                         sed -i "/CONFIG_IP6_NF_MATCH_MARK/d" $(1); \
 608                         echo "CONFIG_IP6_NF_MATCH_MARK=m" >>$(1); \
 609                         sed -i "/CONFIG_IP6_NF_MATCH_LENGTH/d" $(1); \
 610                         echo "CONFIG_IP6_NF_MATCH_LENGTH=m" >>$(1); \
 611                         sed -i "/CONFIG_IP6_NF_MATCH_STATE/d" $(1); \
 612                         echo "CONFIG_IP6_NF_MATCH_STATE=m" >>$(1); \
 613                         sed -i "/CONFIG_IP6_NF_TARGET_MARK/d" $(1); \
 614                         echo "CONFIG_IP6_NF_TARGET_MARK=m" >>$(1); \
 615                         sed -i "/CONFIG_IP6_NF_TARGET_TCPMSS/d" $(1); \
 616                         echo "CONFIG_IP6_NF_TARGET_TCPMSS=m" >>$(1); \
 617                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 618                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 619                 fi; \
 620         fi; \
 621         sed -i "/CONFIG_BCM57XX/d" $(1); \
 622         if [ "$(BCM57)" = "y" ]; then \
 623                 echo "CONFIG_BCM57XX=m" >>$(1); \
 624         else \
 625                 echo "# CONFIG_BCM57XX is not set" >>$(1); \
 626         fi; \
 627         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(EBTABLES)" = "y" ]; then \
 628                 sed -i "/CONFIG_BRIDGE_NF_EBTABLES/d" $(1); \
 629                 echo "CONFIG_BRIDGE_NF_EBTABLES=m" >>$(1); \
 630                 if [ "$(IPV6SUPP)" = "y" ]; then \
 631                         sed -i "/CONFIG_BRIDGE_EBT_IP6/d" $(1); \
 632                         echo "CONFIG_BRIDGE_EBT_IP6=m" >>$(1); \
 633                 fi; \
 634         fi; \
 635         )
 636 endef
 637
 638
 639 bin:
 640 ifeq ($(B),)
 641         @echo $@" is not a valid target!"
 642         @false
 643 endif
 644         @cp router/config_base router/config_$(lowercase_B)
 645         @cp router/busybox/config_base router/busybox/config_$(lowercase_B)
 646         @cp $(LINUXDIR)/config_base $(LINUXDIR)/config_$(lowercase_B)
 647
 648         $(call RouterOptions, router/config_$(lowercase_B))
 649         $(call KernelConfig, $(LINUXDIR)/config_$(lowercase_B))
 650         $(call BusyboxOptions, router/busybox/config_$(lowercase_B))
 651
 652         @$(MAKE) setprofile N=$(TPROFILE) B=$(B) DESC="$(BUILD_DESC)" USB="$(USB)" MIPS32="${MIPS32}" V1="${V1}" V2="${V2}"
 653         @$(MAKE) all
 654
 655 ## Make the "normal" build
 656 a:
 657         @$(MAKE) bin B=A BUILD_DESC="Std" USB="USB" VLAN="$(VLAN)" SNMP=y
 658
 659 ## Make the "normal but without SSH" build
 660 b:
 661         @$(MAKE) bin NO_SSH=y B=B BUILD_DESC="No SSH" USB="USB" VLAN="$(VLAN)" SNMP=y
 662
 663 ## Make the "normal but without CIFS" build
 664 c:
 665         @$(MAKE) bin NO_CIFS=y B=C BUILD_DESC="No CIFS" USB="USB" VLAN="$(VLAN)" SNMP=y
 666
 667 ## Make the "normal but without SAMBA" (Lite) build
 668 d:
 669 ifeq ($(CONFIG_LINUX26),y)
 670         @$(MAKE) bin NO_SAMBA=y SLIM=y NO_CIFS=y NO_JFFS=y NO_ZEBRA=y B=D BUILD_DESC="Lite" USB="USB" VLAN="$(VLAN)" SNMP="$(SNMP)"
 671 else
 672         @$(MAKE) bin NO_SAMBA=y SLIM=y B=D BUILD_DESC="Lite" USB="USB" VLAN="$(VLAN)" SNMP="$(SNMP)"
 673 endif
 674
 675 ## Make the "normal (with NTFS support) + VPN" build
 676 e:
 677 ifeq ($(CONFIG_LINUX26),y)
 678         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)" SNMP=y TCPDUMP="$(TCPDUMP)"
 679 else
 680 #       @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y B=E BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)"
 681         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y BBEXTRAS=y USBEXTRAS=y NTFS=y B=E BUILD_DESC="$(VPN)" USB="USB" SNMP=y VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)"
 682 endif
 683
 684 ## Make the "Mini: no USB, no CIFS, no Zebra" build - targeted for Netgear routers
 685 f:
 686         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_SSH=y NO_ZEBRA=y SLIM=y B=F BUILD_DESC="Mini" USB="" VLAN="$(VLAN)"
 687
 688 ## Make the "Tiny: no JFFS, no USB, no CIFS, no Zebra" build - targeted for cheapskate routers
 689 fs:
 690         @$(MAKE) bin NO_CIFS=y NO_SSH=y NO_JFFS=y NO_ZEBRA=y SLIM=y B=FS BUILD_DESC="Tiny" USB="" VLAN="$(VLAN)"
 691
 692 ## Make the "No USB with IPv6, no Zebra" build - for 4MB routers
 693 i:
 694         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_SSH=y NO_ZEBRA=y IPV6SUPP=y B=I BUILD_DESC="MiniIPv6" USB="" VLAN="$(VLAN)"
 695
 696 ## Make the "No USB with IPv6, no Zebra, with VPN" build - for 4MB routers
 697 ifeq ($(CONFIG_LINUX26),y)
 698 j:
 699         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_SSH=y NO_XXTP=y SLIM=y NO_SAMBA=y NO_ZEBRA=y IPV6SUPP=y OPENVPN=y USERPPTP=y NO_LIBOPT=y B=J BUILD_DESC="MiniIPv6-VPN" USB="" VLAN="$(VLAN)" SNMP="$(SNMP)"
 700 endif
 701
 702 ## Make the "normal with Extras and NTFS" build
 703 m:
 704 ifeq ($(CONFIG_LINUX26),y)
 705         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Ext" USB="USB" VLAN="$(VLAN)" SNMP=y USERPPTP=y  PPTPD=y TCPDUMP="$(TCPDUMP)"
 706 else
 707         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Ext" USB="USB" VLAN="$(VLAN)" SNMP=y USERPPTP=y PPTPD=y TCPDUMP="$(TCPDUMP)"
 708 endif
 709
 710 ## Roadkill
 711 ## Make the "normal (with NTFS support) + VPN + NOCAT" build
 712 nc:
 713 ifeq ($(CONFIG_LINUX26),y)
 714         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=NC BUILD_DESC="$(VPN)" USB="USB" SNMP=y VLAN="$(VLAN)" NOCAT=y TCPDUMP="$(TCPDUMP)" BUILD_DESC+="-$(NC)"
 715 else
 716         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y B=NC BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)" NOCAT=y TCPDUMP="$(TCPDUMP)" BUILD_DESC+=" $(NC)"
 717 endif
 718
 719 ## Toastman
 720 ## Make the "Mini: no USB, + NOCAT" build - for 4MB routers
 721 ncm:
 722         @$(MAKE) bin JFFSv1=y NOCAT=y B=NCM BUILD_DESC="Mini-NOCAT" USB="" VLAN="$(VLAN)"
 723
 724 ## Toastman
 725 ## Make the "normal" build + NOCAT
 726 ncs:
 727         @$(MAKE) bin NOCAT=y B=NCS BUILD_DESC="Std-NOCAT" USB="USB" SNMP=y VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)"
 728
 729
 730 ## Make the "No USB" build
 731 s:
 732 ifeq ($(CONFIG_LINUX26),y)
 733         @$(MAKE) bin JFFSv1=y $(if $(filter r2, $(MIPS32)),,BCM57=y) B=S BUILD_DESC="Std" USB="" VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)"
 734 else
 735         @$(MAKE) bin BBEXTRAS=y BCM57=y B=S BUILD_DESC="Std" USB="" VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)"
 736 endif
 737
 738
 739 ## Make the "No USB with Extras" build (K26 only, for 8MB flash)
 740 ifeq ($(CONFIG_LINUX26),y)
 741 t:
 742         @$(MAKE) bin B=T USB="" BBEXTRAS=y EBTABLES=y NO_LIBOPT=y $(if $(filter r2, $(MIPS32)),,BCM57=y) IPV6SUPP=y BUILD_DESC="Std" SNMP=y VLAN="$(VLAN)"
 743 ## Make the "No USB with OpenVPN and Extras" build (K26 only, for 8MB flash)
 744 u:
 745         @$(MAKE) bin B=U USB="" BBEXTRAS=y EBTABLES=y NO_LIBOPT=y $(if $(filter r2, $(MIPS32)),,BCM57=y) IPV6SUPP=y OPENVPN=y USERPPTP=y BUILD_DESC="$(VPN)"  SNMP=y VLAN="$(VLAN)"
 746 endif
 747
 748 ## Make the "VPN with no USB support" build
 749 v:
 750 ifeq ($(CONFIG_LINUX26),y)
 751         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NO_JFFS=y BCM57=y B=V BUILD_DESC="$(VPN)" USB="" VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)" TCPDUMP="$(TCPDUMP)"
 752 else
 753         @$(MAKE) bin OPENVPN=y PPTPD=y BBEXTRAS=y B=V BUILD_DESC="$(VPN)" USB=""  SNMP=y VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)" TCPDUMP="$(TCPDUMP)"
 754 endif
 755
 756 ## Make the "Small VPN with no USB support" build
 757 vs:
 758 ifeq ($(CONFIG_LINUX26),y)
 759         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NO_JFFS=y NO_CIFS=y B=VS BUILD_DESC="SmallVPN" USB=""
 760 else
 761         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NO_JFFS=y NO_CIFS=y BCM57=y B=VS BUILD_DESC="SmallVPN" USB=""
 762 endif
 763
 764 ## Make Mips32r2 builds
 765
 766 r2a:
 767         @$(MAKE) a MIPS32=r2
 768
 769 r2b:
 770         @$(MAKE) b MIPS32=r2
 771
 772 r2c:
 773         @$(MAKE) c MIPS32=r2
 774
 775 r2d:
 776         @$(MAKE) d MIPS32=r2
 777
 778 r2e:
 779         @$(MAKE) e MIPS32=r2
 780
 781 r2f:
 782         @$(MAKE) f MIPS32=r2 BELKIN=y
 783
 784 r2fs:
 785         @$(MAKE) fs MIPS32=r2
 786
 787 r2i:
 788         @$(MAKE) i MIPS32=r2
 789
 790 r2j:
 791         @$(MAKE) j MIPS32=r2
 792
 793 r2m:
 794         @$(MAKE) m MIPS32=r2
 795
 796 r2n:
 797         @$(MAKE) n MIPS32=r2
 798
 799 r2nc:
 800         @$(MAKE) nc MIPS32=r2
 801
 802 r2r:
 803         @$(MAKE) r MIPS32=r2
 804
 805 r2s:
 806         @$(MAKE) s MIPS32=r2
 807
 808 r2t:
 809         @$(MAKE) t MIPS32=r2
 810
 811 r2u:
 812         @$(MAKE) t MIPS32=r2
 813
 814 r2v:
 815         @$(MAKE) v MIPS32=r2
 816
 817 r2vs:
 818         @$(MAKE) vs MIPS32=r2
 819
 820 n60a:
 821         @$(MAKE) r2a NVRAM_SIZE=60 LINKSYS_E=y
 822
 823 n60b:
 824         @$(MAKE) r2b NVRAM_SIZE=60 LINKSYS_E=y
 825
 826 n60c:
 827         @$(MAKE) r2c NVRAM_SIZE=60 LINKSYS_E=y
 828
 829 n60e:
 830         @$(MAKE) r2e NVRAM_SIZE=60 LINKSYS_E=y
 831
 832 n60m:
 833         @$(MAKE) r2m NVRAM_SIZE=60 LINKSYS_E=y
 834
 835 n60n:
 836         @$(MAKE) r2n NVRAM_SIZE=60 LINKSYS_E=y
 837
 838 n60nc:
 839         @$(MAKE) r2nc NVRAM_SIZE=60 LINKSYS_E=y
 840
 841 n60o:
 842         @$(MAKE) r2o NVRAM_SIZE=60 LINKSYS_E=y
 843
 844 n60r:
 845         @$(MAKE) r2r NVRAM_SIZE=60 LINKSYS_E=y
 846
 847 n60s:
 848         @$(MAKE) bin MIPS32=r2 B=S USB="" NVRAM_SIZE=60 LINKSYS_E=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y BUILD_DESC="Std"
 849
 850 n60t:
 851         @$(MAKE) r2t NVRAM_SIZE=60 LINKSYS_E=y
 852
 853 n60v:
 854         @$(MAKE) bin MIPS32=r2 B=V USB="" NVRAM_SIZE=60 LINKSYS_E=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y OPENVPN=y USERPPTP=y BUILD_DESC="$(VPN)"
 855
 856
 857 setprofile:
 858         echo '#ifndef TOMATO_PROFILE' > router/shared/tomato_profile.h
 859         echo '#define TOMATO_$(N) 1' >> router/shared/tomato_profile.h
 860         echo '#define PROFILE_G 1' >> router/shared/tomato_profile.h
 861         echo '#define PROFILE_N 2' >> router/shared/tomato_profile.h
 862         echo '#define TOMATO_PROFILE PROFILE_$(N)' >> router/shared/tomato_profile.h
 863         echo '#define TOMATO_PROFILE_NAME "$(N)"' >> router/shared/tomato_profile.h
 864         echo '#define TOMATO_BUILD_NAME "$(B)"' >> router/shared/tomato_profile.h
 865         echo '#define TOMATO_BUILD_DESC "$(EXTRA_PREDESC)$(DESC)"' >> router/shared/tomato_profile.h
 866         echo '#ifndef CONFIG_NVRAM_SIZE' >> router/shared/tomato_profile.h
 867         echo '#define CONFIG_NVRAM_SIZE $(NVRAM_SIZE)' >> router/shared/tomato_profile.h
 868         echo '#endif' >> router/shared/tomato_profile.h
 869         echo '#endif' >> router/shared/tomato_profile.h
 870
 871         echo 'TOMATO_$(N) = 1' > tomato_profile.mak
 872         echo 'PROFILE_G = 1' >> tomato_profile.mak
 873         echo 'PROFILE_N = 2' >> tomato_profile.mak
 874         echo 'TOMATO_PROFILE = $$(PROFILE_$(N))' >> tomato_profile.mak
 875         echo 'TOMATO_PROFILE_NAME = "$(N)"' >> tomato_profile.mak
 876         echo 'TOMATO_BUILD = "$(B)"' >> tomato_profile.mak
 877         echo 'TOMATO_BUILD_NAME = "$(B)"' >> tomato_profile.mak
 878         echo 'TOMATO_BUILD_DESC = "$(EXTRA_PREDESC)$(DESC)"' >> tomato_profile.mak
 879         echo 'TOMATO_PROFILE_L = $(lowercase_N)' >> tomato_profile.mak
 880         echo 'TOMATO_PROFILE_U = $(uppercase_N)' >> tomato_profile.mak
 881         echo 'TOMATO_BUILD_USB = "$(USB)"' >> tomato_profile.mak
 882         echo 'TOMATO_BUILD_MIPS32 = "${MIPS32}"' >> tomato_profile.mak
 883         echo 'TOMATO_BUILD_V1 = "${V1}"' >> tomato_profile.mak
 884         echo 'TOMATO_BUILD_V2 = "${V2}"' >> tomato_profile.mak
 885
 886         echo 'export EXTRACFLAGS := $(EXTRA_CFLAGS) -DBCMWPA2 -funit-at-a-time -Wno-pointer-sign -mtune=mips32 -mips32 $(if $(filter $(NVRAM_SIZE),0),,-DCONFIG_NVRAM_SIZE=$(NVRAM_SIZE))' >> tomato_profile.mak
 887
 888 # Note that changes to variables in tomato_profile.mak don't
 889 # get propogated to this invocation of make!
 890         @echo ""
 891         @echo "Using $(N) profile, $(B) build config."
 892         @echo ""
 893
 894         @cd $(LINUXDIR) ; \
 895                 rm -f config_current ; \
 896                 ln -s config_$(lowercase_B) config_current ; \
 897                 cp -f config_current .config
 898
 899         @cd router/busybox && \
 900                 rm -f config_current ; \
 901                 ln -s config_$(lowercase_B) config_current ; \
 902                 cp config_current .config
 903
 904         @cd router ; \
 905                 rm -f config_current ; \
 906                 ln -s config_$(lowercase_B) config_current ; \
 907                 cp config_current .config
 908
 909         @$(MAKE) -C router oldconfig
 910
 911 help:
 912         @echo "a            A build (standard)"
 913         @echo "b            B build (standard minus SSH)"
 914         @echo "c            C build (standard minus CIFS)"
 915         @echo "d            D build (standard minus Samba server)"
 916         @echo "m            M build (standard plus extra utilities and NTFS support)"
 917         @echo "nc           NC build (standard plus VPN, extra utilities, NTFS support and NOCAT)"
 918         @echo "ncm          NCS build (no USB support, NOCAT)"
 919         @echo "ncs          NCS build (std + NOCAT)"
 920         @echo "m            Ext - (standard plus extra utilities and NTFS support)"
 921
 922 ifeq ($(CONFIG_LINUX26),y)
 923         @echo "e            E build (standard plus VPN, extra utilities and NTFS support)"
 924         @echo "i            I build (IPv6 with no USB support minus CIFS and RIPv1/2)"
 925 else
 926         @echo "e            E build (standard plus VPN and NTFS support)"
 927 endif
 928         @echo "s            S build (no USB support)"
 929         @echo "f            F build (no USB support minus CIFS and RIPv1/2)"
 930         @echo "fs           FS build (no USB support minus CIFS, JFFS, Zebra and RIPv1/2)"
 931         @echo "v            V build (VPN with no USB support)"
 932         @echo "vs           VS build (Small VPN with no USB support)"
 933
 934 ifeq ($(CONFIG_LINUX26),y)
 935         @echo "r2a          MIPS Release 2 A build (standard)"
 936         @echo "r2b          MIPS Release 2 B build (standard minus SSH)"
 937         @echo "r2c          MIPS Release 2 C build (standard minus CIFS)"
 938         @echo "r2d          MIPS Release 2 D build (standard minus Samba server)"
 939         @echo "r2e          MIPS Release 2 E build (standard plus VPN and extras)"
 940         @echo "r2f          MIPS Release 2 F build (no USB support minus CIFS, RIPv1/2)"
 941         @echo "r2fs         MIPS Release 2 FS build (no USB support minus JFFS, CIFS, RIPv1/2, Zebra)"
 942         @echo "r2i          MIPS Release 2 I build (IPv6 with no USB support minus CIFS and RIPv1/2)"
 943         @echo "r2m          MIPS Release 2 M build (standard plus extras)"
 944         @echo "r2nc         MIPS Release 2 NC build (standard plus VPN, extras and NOCAT)"
 945         @echo "r2ncm        MIPS Release 2 NCM build (no USB support, plus NOCAT)"
 946         @echo "r2ncs        MIPS Release 2 NCS build (standard plus NOCAT)"
 947         @echo "r2s          MIPS Release 2 S build (no USB support)"
 948         @echo "r2t          MIPS Release 2 T build (no USB support with extras)"
 949         @echo "r2u          MIPS Release 2 U build (no USB support plus VPN with extras)"
 950         @echo "r2v          MIPS Release 2 V build (VPN with no USB support)"
 951         @echo "r2vs         MIPS Release 2 VS build (Small VPN with no USB support)"
 952         @echo "n60m         Linksys E-series build (60KB NVRAM, standard plus extras)"
 953         @echo "n60e         Linksys E-series build (60KB NVRAM, standard plus VPN and extras)"
 954         @echo "n60nc        Linksys E-series build (60KB NVRAM, standard plus extras, plus VPN, plus NOCAT)"
 955         @echo "n60s         Linksys E-series build (60KB NVRAM, no USB support)"
 956         @echo "n60v         Linksys E-series build (60KB NVRAM, VPN with no USB support)"
 957 endif
 958         @echo "..etc..      other build configs"
 959         @echo "clean        -C router clean"
 960         @echo "cleanimage   rm -rf image"
 961         @echo "cleantools   clean btools, mksquashfs"
 962         @echo "cleankernel  -C Linux distclean (but preserves .config)"
 963         @echo "distclean    distclean of Linux & busybox (but preserve .configs)"
 964         @echo "prepk        -C Linux oldconfig dep"
 965
 966 .PHONY: all clean distclean cleanimage cleantools cleankernel prepk what setprofile help
 967 .PHONY: a b c d m Makefile allversions tomato_profile.mak