release/src/router/dropbear/cli-auth.c

   1 /*
   2  * Dropbear SSH
   3  *
   4  * Copyright (c) 2002,2003 Matt Johnston
   5  * Copyright (c) 2004 by Mihnea Stoenescu
   6  * All rights reserved.
   7  *
   8  * Permission is hereby granted, free of charge, to any person obtaining a copy
   9  * of this software and associated documentation files (the "Software"), to deal
  10  * in the Software without restriction, including without limitation the rights
  11  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  12  * copies of the Software, and to permit persons to whom the Software is
  13  * furnished to do so, subject to the following conditions:
  14  *
  15  * The above copyright notice and this permission notice shall be included in
  16  * all copies or substantial portions of the Software.
  17  *
  18  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  19  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  20  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
  21  * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  22  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  23  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  24  * SOFTWARE. */
  25
  26 #include "includes.h"
  27 #include "session.h"
  28 #include "auth.h"
  29 #include "dbutil.h"
  30 #include "buffer.h"
  31 #include "ssh.h"
  32 #include "packet.h"
  33 #include "runopts.h"
  34
  35 void cli_authinitialise() {
  36
  37         memset(&ses.authstate, 0, sizeof(ses.authstate));
  38 }
  39
  40
  41 /* Send a "none" auth request to get available methods */
  42 void cli_auth_getmethods() {
  43
  44         TRACE(("enter cli_auth_getmethods"))
  45
  46         CHECKCLEARTOWRITE();
  47
  48         buf_putbyte(ses.writepayload, SSH_MSG_USERAUTH_REQUEST);
  49         buf_putstring(ses.writepayload, cli_opts.username,
  50                         strlen(cli_opts.username));
  51         buf_putstring(ses.writepayload, SSH_SERVICE_CONNECTION,
  52                         SSH_SERVICE_CONNECTION_LEN);
  53         buf_putstring(ses.writepayload, "none", 4); /* 'none' method */
  54
  55         encrypt_packet();
  56         TRACE(("leave cli_auth_getmethods"))
  57
  58 }
  59
  60 void recv_msg_userauth_banner() {
  61
  62         unsigned char* banner = NULL;
  63         unsigned int bannerlen;
  64         unsigned int i, linecount;
  65
  66         TRACE(("enter recv_msg_userauth_banner"))
  67         if (ses.authstate.authdone) {
  68                 TRACE(("leave recv_msg_userauth_banner: banner after auth done"))
  69                 return;
  70         }
  71
  72         banner = buf_getstring(ses.payload, &bannerlen);
  73         buf_eatstring(ses.payload); /* The language string */
  74
  75         if (bannerlen > MAX_BANNER_SIZE) {
  76                 TRACE(("recv_msg_userauth_banner: bannerlen too long: %d", bannerlen))
  77                 goto out;
  78         }
  79
  80         cleantext(banner);
  81
  82         /* Limit to 25 lines */
  83         linecount = 1;
  84         for (i = 0; i < bannerlen; i++) {
  85                 if (banner[i] == '\n') {
  86                         if (linecount >= MAX_BANNER_LINES) {
  87                                 banner[i] = '\0';
  88                                 break;
  89                         }
  90                         linecount++;
  91                 }
  92         }
  93
  94         printf("%s\n", banner);
  95
  96 out:
  97         m_free(banner);
  98         TRACE(("leave recv_msg_userauth_banner"))
  99 }
 100
 101 /* This handles the message-specific types which
 102  * all have a value of 60. These are
 103  * SSH_MSG_USERAUTH_PASSWD_CHANGEREQ,
 104  * SSH_MSG_USERAUTH_PK_OK, &
 105  * SSH_MSG_USERAUTH_INFO_REQUEST. */
 106 void recv_msg_userauth_specific_60() {
 107
 108 #ifdef ENABLE_CLI_PUBKEY_AUTH
 109         if (cli_ses.lastauthtype == AUTH_TYPE_PUBKEY) {
 110                 recv_msg_userauth_pk_ok();
 111                 return;
 112         }
 113 #endif
 114
 115 #ifdef ENABLE_CLI_INTERACT_AUTH
 116         if (cli_ses.lastauthtype == AUTH_TYPE_INTERACT) {
 117                 recv_msg_userauth_info_request();
 118                 return;
 119         }
 120 #endif
 121
 122 #ifdef ENABLE_CLI_PASSWORD_AUTH
 123         if (cli_ses.lastauthtype == AUTH_TYPE_PASSWORD) {
 124                 /* Eventually there could be proper password-changing
 125                  * support. However currently few servers seem to
 126                  * implement it, and password auth is last-resort
 127                  * regardless - keyboard-interactive is more likely
 128                  * to be used anyway. */
 129                 dropbear_close("Your password has expired.");
 130         }
 131 #endif
 132
 133         dropbear_exit("Unexpected userauth packet");
 134 }
 135
 136 void recv_msg_userauth_failure() {
 137
 138         unsigned char * methods = NULL;
 139         unsigned char * tok = NULL;
 140         unsigned int methlen = 0;
 141         unsigned int partial = 0;
 142         unsigned int i = 0;
 143
 144         TRACE(("<- MSG_USERAUTH_FAILURE"))
 145         TRACE(("enter recv_msg_userauth_failure"))
 146
 147         if (cli_ses.state != USERAUTH_REQ_SENT) {
 148                 /* Perhaps we should be more fatal? */
 149                 dropbear_exit("Unexpected userauth failure");
 150         }
 151
 152 #ifdef ENABLE_CLI_PUBKEY_AUTH
 153         /* If it was a pubkey auth request, we should cross that key
 154          * off the list. */
 155         if (cli_ses.lastauthtype == AUTH_TYPE_PUBKEY) {
 156                 cli_pubkeyfail();
 157         }
 158 #endif
 159
 160 #ifdef ENABLE_CLI_INTERACT_AUTH
 161         /* If we get a failure message for keyboard interactive without
 162          * receiving any request info packet, then we don't bother trying
 163          * keyboard interactive again */
 164         if (cli_ses.lastauthtype == AUTH_TYPE_INTERACT
 165                         && !cli_ses.interact_request_received) {
 166                 TRACE(("setting auth_interact_failed = 1"))
 167                 cli_ses.auth_interact_failed = 1;
 168         }
 169 #endif
 170
 171         cli_ses.lastauthtype = AUTH_TYPE_NONE;
 172
 173         methods = buf_getstring(ses.payload, &methlen);
 174
 175         partial = buf_getbool(ses.payload);
 176
 177         if (partial) {
 178                 dropbear_log(LOG_INFO, "Authentication partially succeeded, more attempts required");
 179         } else {
 180                 ses.authstate.failcount++;
 181         }
 182
 183         TRACE(("Methods (len %d): '%s'", methlen, methods))
 184
 185         ses.authstate.authdone=0;
 186         ses.authstate.authtypes=0;
 187
 188         /* Split with nulls rather than commas */
 189         for (i = 0; i < methlen; i++) {
 190                 if (methods[i] == ',') {
 191                         methods[i] = '\0';
 192                 }
 193         }
 194
 195         tok = methods; /* tok stores the next method we'll compare */
 196         for (i = 0; i <= methlen; i++) {
 197                 if (methods[i] == '\0') {
 198                         TRACE(("auth method '%s'", tok))
 199 #ifdef ENABLE_CLI_PUBKEY_AUTH
 200                         if (strncmp(AUTH_METHOD_PUBKEY, tok,
 201                                 AUTH_METHOD_PUBKEY_LEN) == 0) {
 202                                 ses.authstate.authtypes |= AUTH_TYPE_PUBKEY;
 203                         }
 204 #endif
 205 #ifdef ENABLE_CLI_INTERACT_AUTH
 206                         if (strncmp(AUTH_METHOD_INTERACT, tok,
 207                                 AUTH_METHOD_INTERACT_LEN) == 0) {
 208                                 ses.authstate.authtypes |= AUTH_TYPE_INTERACT;
 209                         }
 210 #endif
 211 #ifdef ENABLE_CLI_PASSWORD_AUTH
 212                         if (strncmp(AUTH_METHOD_PASSWORD, tok,
 213                                 AUTH_METHOD_PASSWORD_LEN) == 0) {
 214                                 ses.authstate.authtypes |= AUTH_TYPE_PASSWORD;
 215                         }
 216 #endif
 217                         tok = &methods[i+1]; /* Must make sure we don't use it after the
 218                                                                         last loop, since it'll point to something
 219                                                                         undefined */
 220                 }
 221         }
 222
 223         m_free(methods);
 224
 225         cli_ses.state = USERAUTH_FAIL_RCVD;
 226
 227         TRACE(("leave recv_msg_userauth_failure"))
 228 }
 229
 230 void recv_msg_userauth_success() {
 231         TRACE(("received msg_userauth_success"))
 232         /* Note: in delayed-zlib mode, setting authdone here
 233          * will enable compression in the transport layer */
 234         ses.authstate.authdone = 1;
 235         cli_ses.state = USERAUTH_SUCCESS_RCVD;
 236         cli_ses.lastauthtype = AUTH_TYPE_NONE;
 237 }
 238
 239 void cli_auth_try() {
 240
 241         int finished = 0;
 242         TRACE(("enter cli_auth_try"))
 243
 244         CHECKCLEARTOWRITE();
 245
 246         /* Order to try is pubkey, interactive, password.
 247          * As soon as "finished" is set for one, we don't do any more. */
 248 #ifdef ENABLE_CLI_PUBKEY_AUTH
 249         if (ses.authstate.authtypes & AUTH_TYPE_PUBKEY) {
 250                 finished = cli_auth_pubkey();
 251                 cli_ses.lastauthtype = AUTH_TYPE_PUBKEY;
 252         }
 253 #endif
 254
 255 #ifdef ENABLE_CLI_INTERACT_AUTH
 256         if (!finished && ses.authstate.authtypes & AUTH_TYPE_INTERACT) {
 257                 if (cli_ses.auth_interact_failed) {
 258                         finished = 0;
 259                 } else {
 260                         cli_auth_interactive();
 261                         cli_ses.lastauthtype = AUTH_TYPE_INTERACT;
 262                         finished = 1;
 263                 }
 264         }
 265 #endif
 266
 267 #ifdef ENABLE_CLI_PASSWORD_AUTH
 268         if (!finished && ses.authstate.authtypes & AUTH_TYPE_PASSWORD) {
 269                 cli_auth_password();
 270                 finished = 1;
 271                 cli_ses.lastauthtype = AUTH_TYPE_PASSWORD;
 272         }
 273 #endif
 274
 275         TRACE(("cli_auth_try lastauthtype %d", cli_ses.lastauthtype))
 276
 277         if (!finished) {
 278                 dropbear_exit("No auth methods could be used.");
 279         }
 280
 281         TRACE(("leave cli_auth_try"))
 282 }
 283
 284 /* A helper for getpass() that exits if the user cancels. The returned
 285  * password is statically allocated by getpass() */
 286 char* getpass_or_cancel(char* prompt)
 287 {
 288         char* password = NULL;
 289
 290 #ifdef DROPBEAR_PASSWORD_ENV
 291     /* Password provided in an environment var */
 292     password = getenv(DROPBEAR_PASSWORD_ENV);
 293     if (password)
 294     {
 295         return password;
 296     }
 297 #endif
 298
 299         password = getpass(prompt);
 300
 301         /* 0x03 is a ctrl-c character in the buffer. */
 302         if (password == NULL || strchr(password, '\3') != NULL) {
 303                 dropbear_close("Interrupted.");
 304         }
 305         return password;
 306 }