release/src/router/openssl/Makefile.bak

   1 ### Generated automatically from Makefile.org by Configure.
   2
   3 ##
   4 ## Makefile for OpenSSL
   5 ##
   6
   7 VERSION=1.0.1c
   8 MAJOR=1
   9 MINOR=0.1
  10 SHLIB_VERSION_NUMBER=1.0.0
  11 SHLIB_VERSION_HISTORY=
  12 SHLIB_MAJOR=1
  13 SHLIB_MINOR=0.0
  14 SHLIB_EXT=.so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
  15 PLATFORM=linux-mipsel
  16 OPTIONS=--openssldir=/etc --cross-compile-prefix=  -ffunction-sections -fdata-sections -Wl,--gc-sections enable-shared enable-rc5 no-camellia no-capieng no-cms no-dtls1 no-ec no-ec_nistp_64_gcc_128 no-ecdh no-ecdsa no-engines no-err no-gmp no-gms no-gost no-hw no-jpake no-krb5 no-md2 no-mdc2 no-psk no-rfc3779 no-ripemd no-rmd160 no-sctp no-seed no-sha0 no-smime no-sse2 no-store no-threads no-ts no-zlib no-zlib-dynamic no-static-engine
  17 CONFIGURE_ARGS=linux-mipsel --openssldir=/etc --cross-compile-prefix=  -ffunction-sections -fdata-sections -Wl,--gc-sections shared enable-rc5 no-sha0 no-smime no-camellia no-krb5 no-rmd160 no-ripemd no-seed no-capieng no-cms no-gms no-gmp no-rfc3779 no-ec no-ecdh no-ecdsa no-err no-hw no-jpake no-threads no-zlib no-engines no-sse2 no-dtls1 no-store no-psk no-md2 no-mdc2 no-ts
  18 SHLIB_TARGET=linux-shared
  19
  20 # HERE indicates where this Makefile lives.  This can be used to indicate
  21 # where sub-Makefiles are expected to be.  Currently has very limited usage,
  22 # and should probably not be bothered with at all.
  23 HERE=.
  24
  25 # INSTALL_PREFIX is for package builders so that they can configure
  26 # for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
  27 # Normally it is left empty.
  28 INSTALL_PREFIX=
  29 INSTALLTOP=/etc
  30
  31 # Do not edit this manually. Use Configure --openssldir=DIR do change this!
  32 OPENSSLDIR=/etc
  33
  34 # NO_IDEA - Define to build without the IDEA algorithm
  35 # NO_RC4  - Define to build without the RC4 algorithm
  36 # NO_RC2  - Define to build without the RC2 algorithm
  37 # THREADS - Define when building with threads, you will probably also need any
  38 #           system defines as well, i.e. _REENTERANT for Solaris 2.[34]
  39 # TERMIO  - Define the termio terminal subsystem, needed if sgtty is missing.
  40 # TERMIOS - Define the termios terminal subsystem, Silicon Graphics.
  41 # LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3).
  42 # DEVRANDOM - Give this the value of the 'random device' if your OS supports
  43 #           one.  32 bytes will be read from this when the random
  44 #           number generator is initalised.
  45 # SSL_FORBID_ENULL - define if you want the server to be not able to use the
  46 #           NULL encryption ciphers.
  47 #
  48 # LOCK_DEBUG - turns on lots of lock debug output :-)
  49 # REF_CHECK - turn on some xyz_free() assertions.
  50 # REF_PRINT - prints some stuff on structure free.
  51 # CRYPTO_MDEBUG - turns on my 'memory leak' detecting stuff
  52 # MFUNC - Make all Malloc/Free/Realloc calls call
  53 #       CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
  54 #       call application defined callbacks via CRYPTO_set_mem_functions()
  55 # MD5_ASM needs to be defined to use the x86 assembler for MD5
  56 # SHA1_ASM needs to be defined to use the x86 assembler for SHA1
  57 # RMD160_ASM needs to be defined to use the x86 assembler for RIPEMD160
  58 # Do not define B_ENDIAN or L_ENDIAN if 'unsigned long' == 8.  It must
  59 # equal 4.
  60 # PKCS1_CHECK - pkcs1 tests.
  61
  62 CROSS_COMPILE=
  63 CC= $(CROSS_COMPILE)mipsel-uclibc-gcc
  64 CFLAG= -fPIC -DOPENSSL_PIC -DDSO_DLFCN -DHAVE_DLFCN_H -ffunction-sections -fdata-sections -DOPENSSL_NO_ERR -DL_ENDIAN -DTERMIO -Os $(EXTRACFLAGS) -DOPENSSL_SMALL_FOOTPRINT -fomit-frame-pointer -Wall -DSHA1_ASM -DSHA256_ASM -DAES_ASM
  65 DEPFLAG= -DOPENSSL_NO_CAMELLIA -DOPENSSL_NO_CAPIENG -DOPENSSL_NO_CMS -DOPENSSL_NO_DTLS1 -DOPENSSL_NO_EC -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_ECDH -DOPENSSL_NO_ECDSA -DOPENSSL_NO_ENGINES -DOPENSSL_NO_GMP -DOPENSSL_NO_GMS -DOPENSSL_NO_GOST -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_MDC2 -DOPENSSL_NO_PSK -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_RIPEMD -DOPENSSL_NO_RMD160 -DOPENSSL_NO_SCTP -DOPENSSL_NO_SEED -DOPENSSL_NO_SHA0 -DOPENSSL_NO_SMIME -DOPENSSL_NO_STORE -DOPENSSL_NO_TS
  66 PEX_LIBS=
  67 EX_LIBS= -Wl,--gc-sections -ldl
  68 EXE_EXT=
  69 ARFLAGS=
  70 AR= $(CROSS_COMPILE)ar $(ARFLAGS) r
  71 RANLIB= $(CROSS_COMPILE)ranlib
  72 NM= $(CROSS_COMPILE)nm
  73 PERL= /usr/bin/perl
  74 TAR= tar
  75 TARFLAGS= --no-recursion
  76 MAKEDEPPROG=makedepend
  77 LIBDIR=lib
  78
  79 # We let the C compiler driver to take care of .s files. This is done in
  80 # order to be excused from maintaining a separate set of architecture
  81 # dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
  82 # gcc, then the driver will automatically translate it to -xarch=v8plus
  83 # and pass it down to assembler.
  84 AS=$(CC) -c
  85 ASFLAG=$(CFLAG)
  86
  87 # For x86 assembler: Set PROCESSOR to 386 if you want to support
  88 # the 80386.
  89 PROCESSOR=
  90
  91 # CPUID module collects small commonly used assembler snippets
  92 CPUID_OBJ= mem_clr.o
  93 BN_ASM= bn-mips.o
  94 DES_ENC= des_enc.o fcrypt_b.o
  95 AES_ENC= aes_cbc.o aes-mips.o
  96 BF_ENC= bf_enc.o
  97 CAST_ENC= c_enc.o
  98 RC4_ENC= rc4_enc.o rc4_skey.o
  99 RC5_ENC= rc5_enc.o
 100 MD5_ASM_OBJ=
 101 SHA1_ASM_OBJ= sha1-mips.o sha256-mips.o
 102 RMD160_ASM_OBJ=
 103 WP_ASM_OBJ= wp_block.o
 104 CMLL_ENC= camellia.o cmll_misc.o cmll_cbc.o
 105 MODES_ASM_OBJ=
 106 ENGINES_ASM_OBJ=
 107 PERLASM_SCHEME= o32
 108
 109 # KRB5 stuff
 110 KRB5_INCLUDES=
 111 LIBKRB5=
 112
 113 # Zlib stuff
 114 ZLIB_INCLUDE=
 115 LIBZLIB=
 116
 117 # TOP level FIPS install directory.
 118 FIPSDIR=/usr/local/ssl/fips-2.0
 119
 120 # This is the location of fipscanister.o and friends.
 121 # The FIPS module build will place it $(INSTALLTOP)/lib
 122 # but since $(INSTALLTOP) can only take the default value
 123 # when the module is built it will be in /usr/local/ssl/lib
 124 # $(INSTALLTOP) for this build may be different so hard
 125 # code the path.
 126
 127 FIPSLIBDIR=
 128
 129 # The location of the library which contains fipscanister.o
 130 # normally it will be libcrypto unless fipsdso is set in which
 131 # case it will be libfips. If not compiling in FIPS mode at all
 132 # this is empty making it a useful test for a FIPS compile.
 133
 134 FIPSCANLIB=
 135
 136 # Shared library base address. Currently only used on Windows.
 137 #
 138
 139 BASEADDR=0xFB00000
 140
 141 DIRS=   crypto ssl apps
 142 ENGDIRS=
 143 SHLIBDIRS= crypto ssl
 144
 145 # dirs in crypto to build
 146 SDIRS=  \
 147         objects \
 148         md4 md5 sha hmac whrlpool \
 149         des aes rc2 rc4 rc5 idea bf cast modes \
 150         bn rsa dsa dh dso engine \
 151         buffer bio stack lhash rand err \
 152         evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui \
 153         pqueue srp cmac
 154 # keep in mind that the above list is adjusted by ./Configure
 155 # according to no-xxx arguments...
 156
 157 # tests to perform.  "alltests" is a special word indicating that all tests
 158 # should be performed.
 159 TESTS = alltests
 160
 161 MAKEFILE= Makefile
 162
 163 MANDIR=$(OPENSSLDIR)/man
 164 MAN1=1
 165 MAN3=3
 166 MANSUFFIX=
 167 HTMLSUFFIX=html
 168 HTMLDIR=$(OPENSSLDIR)/html
 169 SHELL=/bin/sh
 170
 171 TOP=    .
 172 ONEDIRS=out tmp
 173 EDIRS=  times bugs util include certs ms shlib mt demos perl sf dep VMS
 174 WDIRS=  windows
 175 LIBS=   libcrypto.a libssl.a
 176 SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
 177 SHARED_SSL=libssl$(SHLIB_EXT)
 178 SHARED_LIBS=$(SHARED_CRYPTO) $(SHARED_SSL)
 179 SHARED_LIBS_LINK_EXTS=.so.$(SHLIB_MAJOR) .so
 180 SHARED_LDFLAGS=
 181
 182 GENERAL=        Makefile
 183 BASENAME=       openssl
 184 NAME=           $(BASENAME)-$(VERSION)
 185 TARFILE=        $(NAME).tar
 186 WTARFILE=       $(NAME)-win.tar
 187 EXHEADER=       e_os2.h
 188 HEADER=         e_os.h
 189
 190 all: build_all openssl.pc libssl.pc libcrypto.pc
 191
 192 # as we stick to -e, CLEARENV ensures that local variables in lower
 193 # Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
 194 # shell, which [annoyingly enough] terminates unset with error if VAR
 195 # is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
 196 # which terminates unset with error if no variable was present:-(
 197 CLEARENV=       TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}     \
 198                 $${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES}       \
 199                 $${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC}           \
 200                 $${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL} \
 201                 $${EXHEADER+EXHEADER} $${HEADER+HEADER}         \
 202                 $${GENERAL+GENERAL} $${CFLAGS+CFLAGS}           \
 203                 $${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}           \
 204                 $${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS} \
 205                 $${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}     \
 206                 $${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
 207
 208 BUILDENV=       PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
 209                 CC='$(CC)' CFLAG='$(CFLAG)'                     \
 210                 AS='$(CC)' ASFLAG='$(CFLAG) -c'                 \
 211                 AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)'        \
 212                 CROSS_COMPILE='$(CROSS_COMPILE)'        \
 213                 PERL='$(PERL)' ENGDIRS='$(ENGDIRS)'             \
 214                 SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)'     \
 215                 INSTALL_PREFIX='$(INSTALL_PREFIX)'              \
 216                 INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)'   \
 217                 LIBDIR='$(LIBDIR)'                              \
 218                 MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
 219                 DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)'    \
 220                 MAKEDEPPROG='$(MAKEDEPPROG)'                    \
 221                 SHARED_LDFLAGS='$(SHARED_LDFLAGS)'              \
 222                 KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)'   \
 223                 ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)'     \
 224                 EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)'       \
 225                 SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)' \
 226                 PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)'     \
 227                 CPUID_OBJ='$(CPUID_OBJ)'                        \
 228                 BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)'         \
 229                 AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)'     \
 230                 BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)'       \
 231                 RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)'       \
 232                 SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)'                  \
 233                 MD5_ASM_OBJ='$(MD5_ASM_OBJ)'                    \
 234                 RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)'              \
 235                 WP_ASM_OBJ='$(WP_ASM_OBJ)'                      \
 236                 MODES_ASM_OBJ='$(MODES_ASM_OBJ)'                \
 237                 ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)'            \
 238                 PERLASM_SCHEME='$(PERLASM_SCHEME)'              \
 239                 FIPSLIBDIR='${FIPSLIBDIR}'                      \
 240                 FIPSDIR='${FIPSDIR}'                            \
 241                 FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}"      \
 242                 THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
 243 # MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
 244 # which in turn eliminates ambiguities in variable treatment with -e.
 245
 246 # BUILD_CMD is a generic macro to build a given target in a given
 247 # subdirectory.  The target must be given through the shell variable
 248 # `target' and the subdirectory to build in must be given through `dir'.
 249 # This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
 250 # BUILD_ONE_CMD instead.
 251 #
 252 # BUILD_ONE_CMD is a macro to build a given target in a given
 253 # subdirectory if that subdirectory is part of $(DIRS).  It requires
 254 # exactly the same shell variables as BUILD_CMD.
 255 #
 256 # RECURSIVE_BUILD_CMD is a macro to build a given target in all
 257 # subdirectories defined in $(DIRS).  It requires that the target
 258 # is given through the shell variable `target'.
 259 BUILD_CMD=  if [ -d "$$dir" ]; then \
 260             (   cd $$dir && echo "making $$target in $$dir..." && \
 261                 $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
 262             ) || exit 1; \
 263             fi
 264 RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
 265 BUILD_ONE_CMD=\
 266         if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
 267                 $(BUILD_CMD); \
 268         fi
 269
 270 reflect:
 271         @[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
 272
 273 sub_all: build_all
 274 build_all: build_libs build_apps build_tools
 275
 276 build_libs: build_crypto build_ssl build_engines
 277
 278 build_crypto:
 279         @dir=crypto; target=all; $(BUILD_ONE_CMD)
 280 build_ssl:
 281         @dir=ssl; target=all; $(BUILD_ONE_CMD)
 282 build_engines:
 283         @dir=engines; target=all; $(BUILD_ONE_CMD)
 284 build_apps:
 285         @dir=apps; target=all; $(BUILD_ONE_CMD)
 286 build_tests:
 287         @dir=test; target=all; $(BUILD_ONE_CMD)
 288 build_tools:
 289         @dir=tools; target=all; $(BUILD_ONE_CMD)
 290
 291 all_testapps: build_libs build_testapps
 292 build_testapps:
 293         @dir=crypto; target=testapps; $(BUILD_ONE_CMD)
 294
 295 fips_premain_dso$(EXE_EXT): libcrypto.a
 296         [ -z "$(FIPSCANLIB)" ] || $(CC) $(CFLAG) -Iinclude \
 297                 -DFINGERPRINT_PREMAIN_DSO_LOAD -o $@  \
 298                 $(FIPSLIBDIR)fips_premain.c $(FIPSLIBDIR)fipscanister.o \
 299                 libcrypto.a $(EX_LIBS)
 300
 301 libcrypto$(SHLIB_EXT): libcrypto.a fips_premain_dso$(EXE_EXT)
 302         @if [ "$(SHLIB_TARGET)" != "" ]; then \
 303                 if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
 304                         FIPSLD_LIBCRYPTO=libcrypto.a ; \
 305                         FIPSLD_CC="$(CC)"; CC=$(FIPSDIR)/bin/fipsld; \
 306                         export CC FIPSLD_CC FIPSLD_LIBCRYPTO; \
 307                 fi; \
 308                 $(MAKE) -e SHLIBDIRS=crypto build-shared; \
 309         else \
 310                 echo "There's no support for shared libraries on this platform" >&2; \
 311                 exit 1; \
 312         fi
 313
 314 libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
 315         @if [ "$(SHLIB_TARGET)" != "" ]; then \
 316                 $(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
 317         else \
 318                 echo "There's no support for shared libraries on this platform" >&2; \
 319                 exit 1; \
 320         fi
 321
 322 clean-shared:
 323         @set -e; for i in $(SHLIBDIRS); do \
 324                 if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
 325                         tmp="$(SHARED_LIBS_LINK_EXTS)"; \
 326                         for j in $${tmp:-x}; do \
 327                                 ( set -x; rm -f lib$$i$$j ); \
 328                         done; \
 329                 fi; \
 330                 ( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
 331                 if [ "$(PLATFORM)" = "Cygwin" ]; then \
 332                         ( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
 333                 fi; \
 334         done
 335
 336 link-shared:
 337         @ set -e; for i in $(SHLIBDIRS); do \
 338                 $(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
 339                         LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
 340                         LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
 341                         symlink.$(SHLIB_TARGET); \
 342                 libs="$$libs -l$$i"; \
 343         done
 344
 345 build-shared: do_$(SHLIB_TARGET) link-shared
 346
 347 do_$(SHLIB_TARGET):
 348         @ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
 349                 if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 350                         libs="$(LIBKRB5) $$libs"; \
 351                 fi; \
 352                 $(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
 353                         LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
 354                         LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
 355                         LIBDEPS="$$libs $(EX_LIBS)" \
 356                         link_a.$(SHLIB_TARGET); \
 357                 libs="-l$$i $$libs"; \
 358         done
 359
 360 libcrypto.pc: Makefile
 361         @ ( echo 'prefix=$(INSTALLTOP)'; \
 362             echo 'exec_prefix=$${prefix}'; \
 363             echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 364             echo 'includedir=$${prefix}/include'; \
 365             echo ''; \
 366             echo 'Name: OpenSSL-libcrypto'; \
 367             echo 'Description: OpenSSL cryptography library'; \
 368             echo 'Version: '$(VERSION); \
 369             echo 'Requires: '; \
 370             echo 'Libs: -L$${libdir} -lcrypto'; \
 371             echo 'Libs.private: $(EX_LIBS)'; \
 372             echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
 373
 374 libssl.pc: Makefile
 375         @ ( echo 'prefix=$(INSTALLTOP)'; \
 376             echo 'exec_prefix=$${prefix}'; \
 377             echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 378             echo 'includedir=$${prefix}/include'; \
 379             echo ''; \
 380             echo 'Name: OpenSSL'; \
 381             echo 'Description: Secure Sockets Layer and cryptography libraries'; \
 382             echo 'Version: '$(VERSION); \
 383             echo 'Requires: '; \
 384             echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
 385             echo 'Libs.private: $(EX_LIBS)'; \
 386             echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
 387
 388 openssl.pc: Makefile
 389         @ ( echo 'prefix=$(INSTALLTOP)'; \
 390             echo 'exec_prefix=$${prefix}'; \
 391             echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 392             echo 'includedir=$${prefix}/include'; \
 393             echo ''; \
 394             echo 'Name: OpenSSL'; \
 395             echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
 396             echo 'Version: '$(VERSION); \
 397             echo 'Requires: '; \
 398             echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
 399             echo 'Libs.private: $(EX_LIBS)'; \
 400             echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
 401
 402 libclean:
 403         rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib
 404
 405 clean:  libclean
 406         rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
 407         @set -e; target=clean; $(RECURSIVE_BUILD_CMD)
 408         rm -f $(LIBS)
 409         rm -f openssl.pc libssl.pc libcrypto.pc
 410         rm -f speed.* .pure
 411         rm -f $(TARFILE)
 412         @set -e; for i in $(ONEDIRS) ;\
 413         do \
 414         rm -fr $$i/*; \
 415         done
 416
 417 makefile.one: files
 418         $(PERL) util/mk1mf.pl >makefile.one; \
 419         sh util/do_ms.sh
 420
 421 files:
 422         $(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
 423         @set -e; target=files; $(RECURSIVE_BUILD_CMD)
 424
 425 links:
 426         @$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
 427         @$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
 428         @set -e; target=links; $(RECURSIVE_BUILD_CMD)
 429
 430 gentests:
 431         @(cd test && echo "generating dummy tests (if needed)..." && \
 432         $(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
 433
 434 dclean:
 435         rm -rf *.bak include/openssl certs/.0
 436         @set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
 437
 438 rehash: rehash.time
 439 rehash.time: certs apps
 440         @if [ -z "$(CROSS_COMPILE)" ]; then \
 441                 (OPENSSL="`pwd`/util/opensslwrap.sh"; \
 442                 [ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
 443                 OPENSSL_DEBUG_MEMORY=on; \
 444                 export OPENSSL OPENSSL_DEBUG_MEMORY; \
 445                 $(PERL) tools/c_rehash certs) && \
 446                 touch rehash.time; \
 447         else :; fi
 448
 449 test:   tests
 450
 451 tests: rehash
 452         @(cd test && echo "testing..." && \
 453         $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
 454         OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a
 455
 456 report:
 457         @$(PERL) util/selftest.pl
 458
 459 depend:
 460         @set -e; target=depend; $(RECURSIVE_BUILD_CMD)
 461
 462 lint:
 463         @set -e; target=lint; $(RECURSIVE_BUILD_CMD)
 464
 465 tags:
 466         rm -f TAGS
 467         find . -name '[^.]*.[ch]' | xargs etags -a
 468
 469 errors:
 470         $(PERL) util/ck_errf.pl -strict */*.c */*/*.c
 471         $(PERL) util/mkerr.pl -recurse -write
 472         (cd engines; $(MAKE) PERL=$(PERL) errors)
 473
 474 stacks:
 475         $(PERL) util/mkstack.pl -write
 476
 477 util/libeay.num::
 478         $(PERL) util/mkdef.pl crypto update
 479
 480 util/ssleay.num::
 481         $(PERL) util/mkdef.pl ssl update
 482
 483 crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
 484         $(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
 485 crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
 486         $(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
 487 crypto/objects/obj_xref.h: crypto/objects/objxref.pl crypto/objects/obj_xref.txt crypto/objects/obj_mac.num
 488         $(PERL) crypto/objects/objxref.pl crypto/objects/obj_mac.num crypto/objects/obj_xref.txt >crypto/objects/obj_xref.h
 489
 490 apps/openssl-vms.cnf: apps/openssl.cnf
 491         $(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
 492
 493 crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
 494         $(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
 495
 496
 497 TABLE: Configure
 498         (echo 'Output of `Configure TABLE'"':"; \
 499         $(PERL) Configure TABLE) > TABLE
 500
 501 update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h crypto/objects/obj_xref.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
 502
 503 # Build distribution tar-file. As the list of files returned by "find" is
 504 # pretty long, on several platforms a "too many arguments" error or similar
 505 # would occur. Therefore the list of files is temporarily stored into a file
 506 # and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
 507 # tar does not support the --files-from option.
 508 tar:
 509         find . -type d -print | xargs chmod 755
 510         find . -type f -print | xargs chmod a+r
 511         find . -type f -perm -0100 -print | xargs chmod a+x
 512         find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
 513         $(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
 514         tardy --user_number=0  --user_name=openssl \
 515               --group_number=0 --group_name=openssl \
 516               --prefix=openssl-$(VERSION) - |\
 517         gzip --best >../$(TARFILE).gz; \
 518         rm -f ../$(TARFILE).list; \
 519         ls -l ../$(TARFILE).gz
 520
 521 tar-snap:
 522         @$(TAR) $(TARFLAGS) -cvf - \
 523                 `find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*'  \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\
 524         tardy --user_number=0  --user_name=openssl \
 525               --group_number=0 --group_name=openssl \
 526               --prefix=openssl-$(VERSION) - > ../$(TARFILE);\
 527         ls -l ../$(TARFILE)
 528
 529 dist:
 530         $(PERL) Configure dist
 531         @$(MAKE) dist_pem_h
 532         @$(MAKE) SDIRS='$(SDIRS)' clean
 533         @$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' tar
 534
 535 dist_pem_h:
 536         (cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
 537
 538 install: all install_sw
 539
 540 install_sw:
 541         @$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
 542                 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
 543                 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \
 544                 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
 545                 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
 546                 $(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
 547                 $(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
 548                 $(INSTALL_PREFIX)$(OPENSSLDIR)/private
 549         @set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
 550         do \
 551         (cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
 552         chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
 553         done;
 554         @set -e; target=install; $(RECURSIVE_BUILD_CMD)
 555         @set -e; liblist="$(LIBS)"; for i in $$liblist ;\
 556         do \
 557                 if [ -f "$$i" ]; then \
 558                 (       echo installing $$i; \
 559                         cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 560                         $(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 561                         chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 562                         mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i ); \
 563                 fi; \
 564         done;
 565         @set -e; if [ -n "$(SHARED_LIBS)" ]; then \
 566                 tmp="$(SHARED_LIBS)"; \
 567                 for i in $${tmp:-x}; \
 568                 do \
 569                         if [ -f "$$i" -o -f "$$i.a" ]; then \
 570                         (       echo installing $$i; \
 571                                 if [ "$(PLATFORM)" != "Cygwin" ]; then \
 572                                         cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 573                                         chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 574                                         mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
 575                                 else \
 576                                         c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
 577                                         cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 578                                         chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 579                                         mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
 580                                         cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 581                                         chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 582                                         mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
 583                                 fi ); \
 584                                 if expr $(PLATFORM) : 'mingw' > /dev/null; then \
 585                                 (       case $$i in \
 586                                                 *crypto*) i=libeay32.dll;; \
 587                                                 *ssl*)    i=ssleay32.dll;; \
 588                                         esac; \
 589                                         echo installing $$i; \
 590                                         cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
 591                                         chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
 592                                         mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
 593                                 fi; \
 594                         fi; \
 595                 done; \
 596                 (       here="`pwd`"; \
 597                         cd $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR); \
 598                         $(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
 599                 if [ "$(INSTALLTOP)" != "/usr" ]; then \
 600                         echo 'OpenSSL shared libraries have been installed in:'; \
 601                         echo '  $(INSTALLTOP)'; \
 602                         echo ''; \
 603                         sed -e '1,/^$$/d' doc/openssl-shared.txt; \
 604                 fi; \
 605         fi
 606         cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
 607         chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
 608         cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
 609         chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
 610         cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
 611         chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
 612
 613 install_html_docs:
 614         here="`pwd`"; \
 615         for subdir in apps crypto ssl; do \
 616                 mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
 617                 for i in doc/$$subdir/*.pod; do \
 618                         fn=`basename $$i .pod`; \
 619                         echo "installing html/$$fn.$(HTMLSUFFIX)"; \
 620                         cat $$i \
 621                         | sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
 622                         | pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \
 623                         | sed -r 's/<!DOCTYPE.*//g' \
 624                         > $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
 625                         $(PERL) util/extract-names.pl < $$i | \
 626                                 grep -v $$filecase "^$$fn\$$" | \
 627                                 (cd $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
 628                                  while read n; do \
 629                                         PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
 630                                  done); \
 631                 done; \
 632         done
 633
 634 install_docs:
 635         @$(PERL) $(TOP)/util/mkdir-p.pl \
 636                 $(INSTALL_PREFIX)$(MANDIR)/man1 \
 637                 $(INSTALL_PREFIX)$(MANDIR)/man3 \
 638                 $(INSTALL_PREFIX)$(MANDIR)/man5 \
 639                 $(INSTALL_PREFIX)$(MANDIR)/man7
 640         @pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \
 641         here="`pwd`"; \
 642         filecase=; \
 643         if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
 644                 filecase=-i; \
 645         fi; \
 646         set -e; for i in doc/apps/*.pod; do \
 647                 fn=`basename $$i .pod`; \
 648                 sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
 649                 echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
 650                 (cd `$(PERL) util/dirname.pl $$i`; \
 651                 sh -c "$$pod2man \
 652                         --section=$$sec --center=OpenSSL \
 653                         --release=$(VERSION) `basename $$i`") \
 654                         >  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
 655                 $(PERL) util/extract-names.pl < $$i | \
 656                         (grep -v $$filecase "^$$fn\$$"; true) | \
 657                         (grep -v "[     ]"; true) | \
 658                         (cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 659                          while read n; do \
 660                                 PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
 661                          done); \
 662         done; \
 663         set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
 664                 fn=`basename $$i .pod`; \
 665                 sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
 666                 echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
 667                 (cd `$(PERL) util/dirname.pl $$i`; \
 668                 sh -c "$$pod2man \
 669                         --section=$$sec --center=OpenSSL \
 670                         --release=$(VERSION) `basename $$i`") \
 671                         >  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
 672                 $(PERL) util/extract-names.pl < $$i | \
 673                         (grep -v $$filecase "^$$fn\$$"; true) | \
 674                         (grep -v "[     ]"; true) | \
 675                         (cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 676                          while read n; do \
 677                                 PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
 678                          done); \
 679         done
 680
 681 # DO NOT DELETE THIS LINE -- make depend depends on it.