release/src/Makefile

   1 #
   2 # Toplevel Makefile for the BCM947xx Linux Router release
   3 #
   4 # Copyright 2005, Broadcom Corporation
   5 # All Rights Reserved.
   6 #
   7 # THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   8 # KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
   9 # SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  10 # FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  11 #
  12 # $Id: Makefile,v 1.53 2005/04/25 03:54:37 tallest Exp $
  13 #
  14
  15 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  16
  17 # To rebuild everything and all configurations:
  18 #  make distclean
  19 #  make V1=whatever V2=sub-whatever VPN=vpn3.6 a b c d m n o
  20 # The 1st "whatever" would be the build number, the sub-whatever would
  21 #       be the update to the version.
  22 #
  23 # Example:
  24 # make V1=8516 V2="-jffs.1" a b c d m s n o
  25
  26 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  27
  28
  29
  30 export SRCBASE := $(shell pwd)
  31 RELEASEDIR := $(shell (cd $(SRCBASE)/.. && pwd -P))
  32 PATH := $(RELEASEDIR)/tools:$(PATH)
  33 export TPROFILE := N
  34
  35 include ./target.mak
  36
  37 # Normally you'd do something like "make V1=8516 V2=-sub-ver a b c d"
  38 # But if you don't give anything for "V1", it'll get a default from tomato_version.
  39 V1 ?= "--def"
  40 VPN ?= "VPN"
  41 ifeq ($(CONFIG_LINUX26),y)
  42 ND = "K26"
  43 else
  44 ND = "ND"
  45 endif
  46
  47 PPTPD ?= "n"
  48
  49 ifeq ($(NVRAM_SIZE),)
  50 NVRAM_SIZE = 0
  51 endif
  52
  53 -include tomato_profile.mak
  54
  55 # This could be simpler by just using $(TOMATO_PROFILE_NAME) like it used to be,
  56 # but that's fragile.  If you make one certain innocuous change elsewhere in the
  57 # makefile(s), the build will silently be wrong.  This way it works properly every time.
  58 current_BUILD_NAME = $(strip $(shell grep "^TOMATO_BUILD_NAME" tomato_profile.mak  | cut -d"=" -f2))
  59 current_BUILD_DESC = $(strip $(shell grep "^TOMATO_BUILD_DESC" tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  60 current_BUILD_USB  = $(strip $(shell grep "^TOMATO_BUILD_USB"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  61 current_TOMATO_VER = $(strip $(shell grep "TOMATO_MAJOR" router/shared/tomato_version.h  | cut -d"\"" -f2)).$(strip $(shell grep "TOMATO_MINOR" router/shared/tomato_version.h  | cut -d"\"" -f2))
  62
  63 uppercase_N = $(shell echo $(N) | tr a-z  A-Z)
  64 lowercase_N = $(shell echo $(N) | tr A-Z a-z)
  65 uppercase_B = $(shell echo $(B) | tr a-z  A-Z)
  66 lowercase_B = $(shell echo $(B) | tr A-Z a-z)
  67
  68 ifeq ($(CONFIG_LINUX26),y)
  69 mips_rev = $(if $(filter $(MIPS32),r2),MIPSR2,MIPSR1)
  70 KERN_SIZE_OPT ?= n
  71 else
  72 mips_rev =
  73 KERN_SIZE_OPT ?= y
  74 endif
  75
  76 beta = $(if $(filter $(TOMATO_EXPERIMENTAL),1),-beta,)
  77
  78 tomato_ver:
  79         @echo ""
  80         @btools/uversion.pl --gen $(V1) $(mips_rev)$(beta)$(V2) $(ND) $(current_BUILD_USB) $(current_BUILD_DESC)
  81
  82 ifeq ($(TOMATO_BUILD),)
  83
  84 all:
  85         $(MAKE) a
  86
  87 else
  88
  89 all: tomato_ver
  90         @echo ""
  91         @echo "Building Tomato $(ND) $(current_BUILD_USB) $(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2) $(current_BUILD_DESC) $(current_BUILD_NAME) with $(TOMATO_PROFILE_NAME) Profile"
  92
  93         @echo ""
  94         @echo ""
  95
  96         @-mkdir image
  97         @$(MAKE) -C router all
  98         @$(MAKE) -C router install
  99         @$(MAKE) -C btools
 100
 101         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx
 102         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 103 ifeq ($(LINKSYS_E),1)
 104         @rm -f image/tomato-E??00$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 105 endif
 106         @echo "" >>fpkg.log
 107         @echo "***********************" `date` "************************" >>fpkg.log
 108         @cat router/shared/tomato_version >>fpkg.log
 109         @echo "" >>fpkg.log
 110         @cat router/target.info >>fpkg.log
 111 ifeq ($(wildcard include/bcm20xx.h),)
 112         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 113                 -t image/tomato.trx \
 114                 -l W54G,image/WRT54G_WRT54GL.bin \
 115                 -l W54S,image/WRT54GS.bin \
 116                 -l W54s,image/WRT54GSv4.bin \
 117                 -l W54U,image/WRTSL54GS.bin \
 118                 -m 0x10577050,image/WR850G.bin \
 119                 | tee -a fpkg.log
 120 else
 121 ifeq ($(LINKSYS_E),1)
 122         # Linksys E-series build plus generic TRX image
 123         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 124                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 125                 -l 4200,image/tomato-E4200$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 126                 -l 61XN,image/tomato-E3000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 127                 -l 32XN,image/tomato-E2000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 128                 | tee -a fpkg.log
 129 else
 130         # Create generic TRX image
 131         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 132                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 133                 | tee -a fpkg.log
 134 endif
 135 endif
 136
 137         @cp fpkg.log image/fpkg-$(V1)$(mips_rev)$(beta)$(V2).log
 138         @echo ""
 139         @echo "-----------------"
 140         @echo `cat router/shared/tomato_version` " ready"
 141         @echo "-----------------"
 142 ifneq ($(NOVERSION),1)
 143         @cp router/shared/tomato_version router/shared/tomato_version_last
 144         @btools/uversion.pl --bump
 145 endif
 146 endif
 147
 148
 149
 150 clean:
 151         @touch router/.config
 152         @rm -f router/config_[a-z]
 153         @rm -f router/busybox/config_[a-z]
 154         @$(MAKE) -C router $@
 155         @-rmdir router/mipsel-uclibc
 156
 157 cleanimage:
 158         @rm -f fpkg.log
 159         @rm -fr image/*
 160         @rm -f router/.config
 161         @touch router/.config
 162         @-mkdir image
 163
 164 cleantools:
 165         @$(MAKE) -C $(LINUXDIR)/scripts/squashfs clean
 166         @$(MAKE) -C btools clean
 167
 168 cleankernel:
 169         @cd $(LINUXDIR) && \
 170         mv .config save-config && \
 171         $(MAKE) distclean || true; \
 172         cp -p save-config .config || true
 173
 174 kernel:
 175         @$(MAKE) -C router kernel
 176         @ls -l $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/zImage
 177
 178 distclean: clean cleanimage cleankernel cleantools
 179 ifneq ($(INSIDE_MAK),1)
 180         @$(MAKE) -C router $@ INSIDE_MAK=1
 181 endif
 182         mv router/busybox/.config busybox-saved-config || true
 183         @$(MAKE) -C router/busybox distclean
 184         @rm -f router/busybox/config_current
 185         @cp -p busybox-saved-config router/busybox/.config || true
 186         @cp -p router/busybox/.config  router/busybox/config_current || true
 187         @rm -f router/config_current
 188         @rm -f router/.config.cmd router/.config.old router/.config
 189         @rm -f router/libfoo_xref.txt
 190         @rm -f tomato_profile.mak router/shared/tomato_profile.h
 191         @touch tomato_profile.mak
 192         @touch router/shared/tomato_profile.h
 193
 194
 195 prepk:
 196         @cd $(LINUXDIR) ; \
 197                 rm -f config_current ; \
 198                 ln -s config_base config_current ; \
 199                 cp -f config_current .config
 200         $(MAKE) -C $(LINUXDIR) oldconfig
 201 ifneq ($(CONFIG_LINUX26),y)
 202         $(MAKE) -C $(LINUXDIR) dep
 203 endif
 204
 205 what:
 206         @echo ""
 207         @echo "$(current_BUILD_DESC)-$(current_BUILD_NAME)-$(TOMATO_PROFILE_NAME) Profile"
 208         @echo ""
 209
 210
 211 # The methodology for making the different builds is to
 212 # copy the "base" config file to the "target" config file in
 213 # the appropriate directory, and then edit it by removing and
 214 # inserting the desired configuration lines.
 215 # You can't just delete the "whatever=y" line, you must have
 216 # a "...is not set" line, or the make oldconfig will stop and ask
 217 # what to do.
 218
 219 # Options for "make bin" :
 220 # BUILD_DESC (Std|Lite|Ext|...)
 221 # MIPS32 (r2|r1)
 222 # KERN_SIZE_OPT
 223 # USB ("USB"|"")
 224 # JFFSv1 | NO_JFFS
 225 # NO_CIFS, NO_SSH, NO_ZEBRA, NO_SAMBA, NO_HTTPS, NO_XXTP, NO_LIBOPT
 226 # SAMBA3, OPENVPN, IPV6SUPP, EBTABLES, NTFS, MEDIASRV, BBEXTRAS, USBEXTRAS, BCM57, SLIM, NOCAT
 227 # NFS BTCLIENT BTGUI TR_EXTRAS SNMP SDHC HFS UPS DNSCRYPT PPTPD
 228
 229 define RouterOptions
 230         @( \
 231         if [ "$(CONFIG_LINUX26)" = "y" ] || [ "$(SAMBA3)" = "y" ]; then \
 232                 sed -i "/TCONFIG_SAMBA3/d" $(1); \
 233                 echo "TCONFIG_SAMBA3=y" >>$(1); \
 234         fi; \
 235         sed -i "/TCONFIG_EMF/d" $(1); \
 236         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 237                 if [ "$(SLIM)" = "y" ]; then \
 238                         echo "# TCONFIG_EMF is not set" >>$(1); \
 239                 else \
 240                         echo "TCONFIG_EMF=y" >>$(1); \
 241                 fi; \
 242         else \
 243                 echo "# TCONFIG_EMF is not set" >>$(1); \
 244         fi; \
 245         sed -i "/TCONFIG_JFFSV1/d" $(1); \
 246         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 247                 if [ "$(JFFSv1)" = "y" ]; then \
 248                         echo "TCONFIG_JFFSV1=y" >>$(1); \
 249                 else \
 250                         echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 251                 fi; \
 252         else \
 253                 echo "TCONFIG_JFFSV1=y" >>$(1); \
 254         fi; \
 255         if [ "$(USB)" = "USB" ]; then \
 256                 sed -i "/TCONFIG_USB is not set/d" $(1); \
 257                 echo "TCONFIG_USB=y" >>$(1); \
 258                 if [ "$(USBEXTRAS)" = "y" ]; then \
 259                         sed -i "/TCONFIG_USB_EXTRAS/d" $(1); \
 260                         echo "TCONFIG_USB_EXTRAS=y" >>$(1); \
 261                 fi; \
 262                 if [ "$(NTFS)" = "y" ]; then \
 263                         sed -i "/TCONFIG_NTFS/d" $(1); \
 264                         echo "TCONFIG_NTFS=y" >>$(1); \
 265                 fi; \
 266                 if [ "$(MEDIASRV)" = "y" ]; then \
 267                         sed -i "/TCONFIG_MEDIA_SERVER/d" $(1); \
 268                         echo "TCONFIG_MEDIA_SERVER=y" >>$(1); \
 269                 fi; \
 270         else \
 271                 sed -i "/TCONFIG_USB=y/d" $(1); \
 272                 echo "# TCONFIG_USB is not set" >>$(1); \
 273         fi; \
 274         if [ "$(NO_SAMBA)" = "y" ]; then \
 275                 sed -i "/TCONFIG_SAMBASRV/d" $(1); \
 276                 echo "# TCONFIG_SAMBASRV is not set" >>$(1); \
 277         fi; \
 278         if [ "$(NO_ZEBRA)" = "y" ]; then \
 279                 sed -i "/TCONFIG_ZEBRA/d" $(1); \
 280                 echo "# TCONFIG_ZEBRA is not set" >>$(1); \
 281         fi; \
 282         if [ "$(NO_JFFS)" = "y" ]; then \
 283                 sed -i "/TCONFIG_JFFS2/d" $(1); \
 284                 echo "# TCONFIG_JFFS2 is not set" >>$(1); \
 285                 sed -i "/TCONFIG_JFFSV1/d" $(1); \
 286                 echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 287         fi; \
 288         if [ "$(NO_CIFS)" = "y" ]; then \
 289                 sed -i "/TCONFIG_CIFS/d" $(1); \
 290                 echo "# TCONFIG_CIFS is not set" >>$(1); \
 291         fi; \
 292         if [ "$(NO_SSH)" = "y" ]; then \
 293                 sed -i "/TCONFIG_SSH/d" $(1); \
 294                 echo "# TCONFIG_SSH is not set" >>$(1); \
 295         fi; \
 296         if [ "$(NO_HTTPS)" = "y" ]; then \
 297                 sed -i "/TCONFIG_HTTPS/d" $(1); \
 298                 echo "# TCONFIG_HTTPS is not set" >>$(1); \
 299         fi; \
 300         if [ "$(NO_XXTP)" = "y" ]; then \
 301                 sed -i "/TCONFIG_L2TP/d" $(1); \
 302                 echo "# TCONFIG_L2TP is not set" >>$(1); \
 303                 sed -i "/TCONFIG_PPTP/d" $(1); \
 304                 echo "# TCONFIG_PPTP is not set" >>$(1); \
 305         fi; \
 306         if [ "$(NO_LIBOPT)" = "y" ]; then \
 307                 sed -i "/TCONFIG_OPTIMIZE_SHARED_LIBS/d" $(1); \
 308                 echo "# TCONFIG_OPTIMIZE_SHARED_LIBS is not set" >>$(1); \
 309         fi; \
 310         if [ "$(EBTABLES)" = "y" ]; then \
 311                 sed -i "/TCONFIG_EBTABLES/d" $(1); \
 312                 echo "TCONFIG_EBTABLES=y" >>$(1); \
 313         fi; \
 314         if [ "$(IPV6SUPP)" = "y" ]; then \
 315                 sed -i "/TCONFIG_IPV6/d" $(1); \
 316                 echo "TCONFIG_IPV6=y" >>$(1); \
 317         fi; \
 318         if [ "$(NOCAT)" = "y" ]; then \
 319                 sed -i "/TCONFIG_NOCAT/d" $(1); \
 320                 echo "TCONFIG_NOCAT=y" >>$(1); \
 321         fi; \
 322         if [ "$(OPENVPN)" = "y" ]; then \
 323                 sed -i "/TCONFIG_LZO/d" $(1); \
 324                 echo "TCONFIG_LZO=y" >>$(1); \
 325                 sed -i "/TCONFIG_OPENVPN/d" $(1); \
 326                 echo "TCONFIG_OPENVPN=y" >>$(1); \
 327                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 328                         sed -i "/TCONFIG_FTP_SSL/d" $(1); \
 329                         echo "TCONFIG_FTP_SSL=y" >>$(1); \
 330                 fi; \
 331         fi; \
 332         if [ "$(PPTPD)" = "y" ]; then \
 333                 sed -i "/TCONFIG_PPTPD/d" $(1); \
 334                 echo "TCONFIG_PPTPD=y" >>$(1); \
 335         fi; \
 336         if [ "$(BTCLIENT)" = "y" ]; then \
 337                 sed -i "/TCONFIG_BT/d" $(1); \
 338                 echo "TCONFIG_BT=y" >>$(1); \
 339                 sed -i "/TCONFIG_BBT/d" $(1); \
 340                 echo "TCONFIG_BBT=y" >>$(1); \
 341         fi; \
 342         if [ "$(BTGUI)" = "y" ]; then \
 343                 sed -i "/TCONFIG_BT/d" $(1); \
 344                 echo "TCONFIG_BT=y" >>$(1); \
 345         fi; \
 346         if [ "$(TR_EXTRAS)" = "y" ]; then \
 347                 sed -i "/TCONFIG_TR_EXTRAS/d" $(1); \
 348                 echo "TCONFIG_TR_EXTRAS=y" >>$(1); \
 349         fi; \
 350         if [ "$(NFS)" = "y" ]; then \
 351                 sed -i "/TCONFIG_NFS/d" $(1); \
 352                 echo "TCONFIG_NFS=y" >>$(1); \
 353         fi; \
 354         if [ "$(SNMP)" = "y" ]; then \
 355                 sed -i "/TCONFIG_SNMP/d" $(1); \
 356                 echo "TCONFIG_SNMP=y" >>$(1); \
 357         fi; \
 358         if [ "$(SDHC)" = "y" ]; then \
 359                 sed -i "/TCONFIG_SDHC/d" $(1); \
 360                 echo "TCONFIG_SDHC=y" >>$(1); \
 361         fi; \
 362         if [ "$(HFS)" = "y" ]; then \
 363                 sed -i "/TCONFIG_HFS/d" $(1); \
 364                 echo "TCONFIG_HFS=y" >>$(1); \
 365         fi; \
 366         if [ "$(UPS)" = "y" ]; then \
 367                 sed -i "/TCONFIG_UPS/d" $(1); \
 368                 echo "TCONFIG_UPS=y" >>$(1); \
 369         fi; \
 370         if [ "$(DNSCRYPT)" = "y" ]; then \
 371                 sed -i "/TCONFIG_DNSCRYPT/d" $(1); \
 372                 echo "TCONFIG_DNSCRYPT=y" >>$(1); \
 373         fi; \
 374         )
 375 endef
 376
 377 define BusyboxOptions
 378         @( \
 379         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 380                 sed -i "/CONFIG_FEATURE_2_4_MODULES/d" $(1); \
 381                 echo "# CONFIG_FEATURE_2_4_MODULES is not set" >>$(1); \
 382                 sed -i "/CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT/d" $(1); \
 383                 echo "CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y" >>$(1); \
 384                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 385                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 386                 sed -i "/CONFIG_MKNOD/d" $(1); \
 387                 echo "CONFIG_MKNOD=y" >>$(1); \
 388                 sed -i "/CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE/d" $(1); \
 389                 echo "CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=512" >>$(1); \
 390         fi; \
 391         if [ "$(NO_CIFS)" = "y" ]; then \
 392                 sed -i "/CONFIG_FEATURE_MOUNT_CIFS/d" $(1); \
 393                 echo "# CONFIG_FEATURE_MOUNT_CIFS is not set" >>$(1); \
 394         fi; \
 395         if [ "$(BBEXTRAS)" = "y" ]; then \
 396                 sed -i "/CONFIG_SENDMAIL/d" $(1); \
 397                 echo "CONFIG_SENDMAIL=y" >>$(1); \
 398                 sed -i "/CONFIG_WHOIS/d" $(1); \
 399                 echo "CONFIG_WHOIS=y" >>$(1); \
 400                 sed -i "/CONFIG_FEATURE_SORT_BIG/d" $(1); \
 401                 echo "CONFIG_FEATURE_SORT_BIG=y" >>$(1); \
 402                 sed -i "/CONFIG_CLEAR/d" $(1); \
 403                 echo "CONFIG_CLEAR=y" >>$(1); \
 404                 sed -i "/CONFIG_NICE/d" $(1); \
 405                 echo "CONFIG_NICE=y" >>$(1); \
 406                 sed -i "/CONFIG_SETCONSOLE/d" $(1); \
 407                 echo "CONFIG_SETCONSOLE=y" >>$(1); \
 408                 sed -i "/CONFIG_SEQ/d" $(1); \
 409                 echo "CONFIG_SEQ=y" >>$(1); \
 410                 sed -i "/CONFIG_STTY/d" $(1); \
 411                 echo "CONFIG_STTY=y" >>$(1); \
 412         fi; \
 413         if [ "$(USB)" = "USB" ]; then \
 414                 if [ "$(USBEXTRAS)" = "y" ]; then \
 415                         sed -i "/CONFIG_E2FSCK/d" $(1); \
 416                         echo "CONFIG_E2FSCK=y" >>$(1); \
 417                         sed -i "/CONFIG_MKE2FS/d" $(1); \
 418                         echo "CONFIG_MKE2FS=y" >>$(1); \
 419                         sed -i "/CONFIG_FDISK/d" $(1); \
 420                         echo "CONFIG_FDISK=y" >>$(1); \
 421                         sed -i "/CONFIG_FEATURE_FDISK_WRITABLE/d" $(1); \
 422                         echo "CONFIG_FEATURE_FDISK_WRITABLE=y" >>$(1); \
 423                         sed -i "/CONFIG_MKFS_VFAT/d" $(1); \
 424                         echo "CONFIG_MKFS_VFAT=y" >>$(1); \
 425                         sed -i "/CONFIG_MKSWAP/d" $(1); \
 426                         echo "CONFIG_MKSWAP=y" >>$(1); \
 427                         sed -i "/CONFIG_FLOCK/d" $(1); \
 428                         echo "CONFIG_FLOCK=y" >>$(1); \
 429                         sed -i "/CONFIG_FSYNC/d" $(1); \
 430                         echo "CONFIG_FSYNC=y" >>$(1); \
 431                         sed -i "/CONFIG_UNZIP/d" $(1); \
 432                         echo "CONFIG_UNZIP=y" >>$(1); \
 433                         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 434                                 sed -i "/CONFIG_LSUSB/d" $(1); \
 435                                 echo "CONFIG_LSUSB=y" >>$(1); \
 436                                 sed -i "/CONFIG_FEATURE_WGET_STATUSBAR/d" $(1); \
 437                                 echo "CONFIG_FEATURE_WGET_STATUSBAR=y" >>$(1); \
 438                                 sed -i "/CONFIG_FEATURE_VERBOSE_USAGE/d" $(1); \
 439                                 echo "CONFIG_FEATURE_VERBOSE_USAGE=y" >>$(1); \
 440                         fi; \
 441                 fi; \
 442         else \
 443                 sed -i "/CONFIG_FEATURE_MOUNT_LOOP/d" $(1); \
 444                 echo "# CONFIG_FEATURE_MOUNT_LOOP is not set" >>$(1); \
 445                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 446                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 447                 sed -i "/CONFIG_FEATURE_MOUNT_LABEL/d" $(1); \
 448                 echo "# CONFIG_FEATURE_MOUNT_LABEL is not set" >>$(1); \
 449                 sed -i "/CONFIG_FEATURE_MOUNT_FSTAB/d" $(1); \
 450                 echo "# CONFIG_FEATURE_MOUNT_FSTAB is not set" >>$(1); \
 451                 sed -i "/CONFIG_VOLUMEID/d" $(1); \
 452                 echo "# CONFIG_VOLUMEID is not set" >>$(1); \
 453                 sed -i "/CONFIG_BLKID/d" $(1); \
 454                 echo "# CONFIG_BLKID is not set" >>$(1); \
 455                 sed -i "/CONFIG_SWAPONOFF/d" $(1); \
 456                 echo "# CONFIG_SWAPONOFF is not set" >>$(1); \
 457                 sed -i "/CONFIG_CHROOT/d" $(1); \
 458                 echo "# CONFIG_CHROOT is not set" >>$(1); \
 459                 sed -i "/CONFIG_PIVOT_ROOT/d" $(1); \
 460                 echo "# CONFIG_PIVOT_ROOT is not set" >>$(1); \
 461                 sed -i "/CONFIG_TRUE/d" $(1); \
 462                 echo "# CONFIG_TRUE is not set" >>$(1); \
 463         fi; \
 464         if [ "$(IPV6SUPP)" = "y" ]; then \
 465                 sed -i "/CONFIG_FEATURE_IPV6/d" $(1); \
 466                 echo "CONFIG_FEATURE_IPV6=y" >>$(1); \
 467                 sed -i "/CONFIG_PING6/d" $(1); \
 468                 echo "CONFIG_PING6=y" >>$(1); \
 469                 sed -i "/CONFIG_TRACEROUTE6/d" $(1); \
 470                 echo "CONFIG_TRACEROUTE6=y" >>$(1); \
 471                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 472                         sed -i "/CONFIG_FEATURE_UDHCP_RFC5969/d" $(1); \
 473                         echo "CONFIG_FEATURE_UDHCP_RFC5969=y" >>$(1); \
 474                 fi; \
 475         fi; \
 476         if [ "$(SLIM)" = "y" ]; then \
 477                 sed -i "/CONFIG_AWK/d" $(1); \
 478                 echo "# CONFIG_AWK is not set" >>$(1); \
 479                 sed -i "/CONFIG_BASENAME/d" $(1); \
 480                 echo "# CONFIG_BASENAME is not set" >>$(1); \
 481                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 482                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 483                 sed -i "/CONFIG_BLKID/d" $(1); \
 484                 echo "# CONFIG_BLKID is not set" >>$(1); \
 485                 sed -i "/CONFIG_TELNET=y/d" $(1); \
 486                 echo "# CONFIG_TELNET is not set" >>$(1); \
 487                 sed -i "/CONFIG_ARPING/d" $(1); \
 488                 echo "# CONFIG_ARPING is not set" >>$(1); \
 489                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 490                 echo "# CONFIG_FEATURE_LS_COLOR is not set" >>$(1); \
 491                 sed -i "/CONFIG_CHOWN/d" $(1); \
 492                 echo "# CONFIG_CHOWN is not set" >>$(1); \
 493         else \
 494                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 495                 echo "CONFIG_FEATURE_LS_COLOR=y" >>$(1); \
 496                 sed -i "/CONFIG_FEATURE_LS_COLOR_IS_DEFAULT/d" $(1); \
 497                 echo "CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y" >>$(1); \
 498         fi; \
 499         )
 500 endef
 501
 502 define KernelConfig
 503         @( \
 504         sed -i "/CONFIG_NVRAM_SIZE/d" $(1); \
 505         echo "CONFIG_NVRAM_SIZE="$(NVRAM_SIZE) >>$(1); \
 506         sed -i "/CONFIG_CC_OPTIMIZE_FOR_SIZE/d" $(1); \
 507         if [ "$(KERN_SIZE_OPT)" = "y" ]; then \
 508                 echo "CONFIG_CC_OPTIMIZE_FOR_SIZE=y" >>$(1); \
 509         else \
 510                 echo "# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set" >>$(1); \
 511         fi; \
 512         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(MIPS32)" = "r2" ]; then \
 513                 sed -i "/CONFIG_CPU_MIPS32_R1/d" $(1); \
 514                 echo "# CONFIG_CPU_MIPS32_R1 is not set" >>$(1); \
 515                 sed -i "/CONFIG_CPU_MIPS32_R2/d" $(1); \
 516                 echo "CONFIG_CPU_MIPS32_R2=y" >>$(1); \
 517                 sed -i "/CONFIG_CPU_MIPSR1/d" $(1); \
 518                 echo "CONFIG_CPU_MIPSR2=y" >>$(1); \
 519         fi; \
 520         if [ "$(UPS)" = "y" ]; then \
 521                 sed -i "/CONFIG_INPUT=m/d" $(1); \
 522                 echo "CONFIG_INPUT=y" >>$(1); \
 523                 sed -i "/CONFIG_USB=m/d" $(1); \
 524                 echo "CONFIG_USB=y" >>$(1); \
 525                 sed -i "/CONFIG_HID=m/d" $(1); \
 526                 echo "CONFIG_HID=y" >>$(1); \
 527                 sed -i "/CONFIG_USB_HID=m/d" $(1); \
 528                 echo "CONFIG_USB_HID=y" >>$(1); \
 529                 sed -i "/CONFIG_USB_HIDDEV=m/d" $(1); \
 530                 echo "CONFIG_USB_HIDDEV=y" >>$(1); \
 531                 sed -i "/CONFIG_USB_DEVICEFS=m/d" $(1); \
 532                 echo "CONFIG_USB_DEVICEFS=y" >>$(1); \
 533         fi; \
 534         if [ "$(USB)" = "" ]; then \
 535                 sed -i "/CONFIG_EFI_PARTITION/d" $(1); \
 536                 echo "# CONFIG_EFI_PARTITION is not set" >>$(1); \
 537         fi; \
 538         if [ "$(IPV6SUPP)" = "y" ]; then \
 539                 sed -i "/CONFIG_IPV6 is not set/d" $(1); \
 540                 echo "CONFIG_IPV6=y" >>$(1); \
 541                 sed -i "/CONFIG_IP6_NF_IPTABLES/d" $(1); \
 542                 echo "CONFIG_IP6_NF_IPTABLES=y" >>$(1); \
 543                 sed -i "/CONFIG_IP6_NF_MATCH_RT/d" $(1); \
 544                 echo "CONFIG_IP6_NF_MATCH_RT=y" >>$(1); \
 545                 sed -i "/CONFIG_IP6_NF_FILTER/d" $(1); \
 546                 echo "CONFIG_IP6_NF_FILTER=m" >>$(1); \
 547                 sed -i "/CONFIG_IP6_NF_TARGET_LOG/d" $(1); \
 548                 echo "CONFIG_IP6_NF_TARGET_LOG=m" >>$(1); \
 549                 sed -i "/CONFIG_IP6_NF_TARGET_REJECT/d" $(1); \
 550                 echo "CONFIG_IP6_NF_TARGET_REJECT=m" >>$(1); \
 551                 sed -i "/CONFIG_IP6_NF_MANGLE/d" $(1); \
 552                 echo "CONFIG_IP6_NF_MANGLE=m" >>$(1); \
 553                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 554                         sed -i "/CONFIG_NF_CONNTRACK_IPV6/d" $(1); \
 555                         echo "CONFIG_NF_CONNTRACK_IPV6=m" >>$(1); \
 556                         sed -i "/CONFIG_NETFILTER_XT_MATCH_HL/d" $(1); \
 557                         echo "CONFIG_NETFILTER_XT_MATCH_HL=m" >>$(1); \
 558                         sed -i "/CONFIG_IPV6_ROUTER_PREF/d" $(1); \
 559                         echo "CONFIG_IPV6_ROUTER_PREF=y" >>$(1); \
 560                         sed -i "/CONFIG_IPV6_SIT/d" $(1); \
 561                         echo "CONFIG_IPV6_SIT=m" >>$(1); \
 562                         sed -i "/CONFIG_IPV6_SIT_6RD/d" $(1); \
 563                         echo "CONFIG_IPV6_SIT_6RD=y" >>$(1); \
 564                         sed -i "/CONFIG_IPV6_MULTIPLE_TABLES/d" $(1); \
 565                         echo "CONFIG_IPV6_MULTIPLE_TABLES=y" >>$(1); \
 566                         sed -i "/CONFIG_IP6_NF_RAW/d" $(1); \
 567                         echo "CONFIG_IP6_NF_RAW=m" >>$(1); \
 568                         sed -i "/CONFIG_IPV6_OPTIMISTIC_DAD/d" $(1); \
 569                         echo "CONFIG_IPV6_OPTIMISTIC_DAD=y" >>$(1); \
 570                         sed -i "/CONFIG_IPV6_MROUTE/d" $(1); \
 571                         echo "CONFIG_IPV6_MROUTE=y" >>$(1); \
 572                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 573                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 574                 else \
 575                         sed -i "/CONFIG_IP6_NF_CONNTRACK/d" $(1); \
 576                         echo "CONFIG_IP6_NF_CONNTRACK=m" >>$(1); \
 577                         sed -i "/CONFIG_IP6_NF_MATCH_HL/d" $(1); \
 578                         echo "CONFIG_IP6_NF_MATCH_HL=m" >>$(1); \
 579                         sed -i "/CONFIG_IP6_NF_FTP/d" $(1); \
 580                         echo "CONFIG_IP6_NF_FTP=m" >>$(1); \
 581                         sed -i "/CONFIG_IP6_NF_MATCH_LIMIT/d" $(1); \
 582                         echo "CONFIG_IP6_NF_MATCH_LIMIT=m" >>$(1); \
 583                         sed -i "/CONFIG_IP6_NF_MATCH_CONDITION/d" $(1); \
 584                         echo "CONFIG_IP6_NF_MATCH_CONDITION=m" >>$(1); \
 585                         sed -i "/CONFIG_IP6_NF_MATCH_MAC/d" $(1); \
 586                         echo "CONFIG_IP6_NF_MATCH_MAC=m" >>$(1); \
 587                         sed -i "/CONFIG_IP6_NF_MATCH_MULTIPORT/d" $(1); \
 588                         echo "CONFIG_IP6_NF_MATCH_MULTIPORT=m" >>$(1); \
 589                         sed -i "/CONFIG_IP6_NF_MATCH_MARK/d" $(1); \
 590                         echo "CONFIG_IP6_NF_MATCH_MARK=m" >>$(1); \
 591                         sed -i "/CONFIG_IP6_NF_MATCH_LENGTH/d" $(1); \
 592                         echo "CONFIG_IP6_NF_MATCH_LENGTH=m" >>$(1); \
 593                         sed -i "/CONFIG_IP6_NF_MATCH_STATE/d" $(1); \
 594                         echo "CONFIG_IP6_NF_MATCH_STATE=m" >>$(1); \
 595                         sed -i "/CONFIG_IP6_NF_TARGET_MARK/d" $(1); \
 596                         echo "CONFIG_IP6_NF_TARGET_MARK=m" >>$(1); \
 597                         sed -i "/CONFIG_IP6_NF_TARGET_TCPMSS/d" $(1); \
 598                         echo "CONFIG_IP6_NF_TARGET_TCPMSS=m" >>$(1); \
 599                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 600                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 601                 fi; \
 602         fi; \
 603         sed -i "/CONFIG_BCM57XX/d" $(1); \
 604         if [ "$(BCM57)" = "y" ]; then \
 605                 echo "CONFIG_BCM57XX=m" >>$(1); \
 606         else \
 607                 echo "# CONFIG_BCM57XX is not set" >>$(1); \
 608         fi; \
 609         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(EBTABLES)" = "y" ]; then \
 610                 sed -i "/CONFIG_BRIDGE_NF_EBTABLES/d" $(1); \
 611                 echo "CONFIG_BRIDGE_NF_EBTABLES=m" >>$(1); \
 612                 if [ "$(IPV6SUPP)" = "y" ]; then \
 613                         sed -i "/CONFIG_BRIDGE_EBT_IP6/d" $(1); \
 614                         echo "CONFIG_BRIDGE_EBT_IP6=m" >>$(1); \
 615                 fi; \
 616         fi; \
 617         )
 618 endef
 619
 620
 621 bin:
 622 ifeq ($(B),)
 623         @echo $@" is not a valid target!"
 624         @false
 625 endif
 626         @cp router/config_base router/config_$(lowercase_B)
 627         @cp router/busybox/config_base router/busybox/config_$(lowercase_B)
 628         @cp $(LINUXDIR)/config_base $(LINUXDIR)/config_$(lowercase_B)
 629
 630         $(call RouterOptions, router/config_$(lowercase_B))
 631         $(call KernelConfig, $(LINUXDIR)/config_$(lowercase_B))
 632         $(call BusyboxOptions, router/busybox/config_$(lowercase_B))
 633
 634         @$(MAKE) setprofile N=$(TPROFILE) B=$(B) DESC="$(BUILD_DESC)" USB="$(USB)"
 635         @$(MAKE) all
 636
 637 ## VPN
 638 e:
 639 ifeq ($(CONFIG_LINUX26),y)
 640         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="$(VPN)" USB="USB" SNMP=y HFS=y DNSCRYPT=y PPTPD=y
 641 else
 642         @$(MAKE) bin OPENVPN=y BBEXTRAS=y USBEXTRAS=y NTFS=y B=E BUILD_DESC="$(VPN)" USB="USB"  SNMP=y HFS=y DNSCRYPT=y PPTPD=y
 643 endif
 644
 645 ## BTgui-VPN
 646 c:
 647 ifeq ($(CONFIG_LINUX26),y)
 648         @$(MAKE) bin NTFS=y OPENVPN=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="BTgui-VPN" USB="USB" BTGUI=y SNMP=y HFS=y DNSCRYPT=y PPTPD=y
 649 else
 650         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="BTgui" USB="USB" BTGUI=y HFS=y DNSCRYPT=y PPTPD=y
 651 endif
 652
 653 ## Nocat-VPN
 654 d:
 655 ifeq ($(CONFIG_LINUX26),y)
 656         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Nocat-VPN" USB="USB" BTGUI=y NOCAT=y OPENVPN=y SNMP=y HFS=y DNSCRYPT=y PPTPD=y
 657 else
 658         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Nocat-VPN" USB="USB" BTGUI=y NOCAT=y OPENVPN=y SNMP=y HFS=y DNSCRYPT=y PPTPD=y
 659 endif
 660
 661
 662 ## BT
 663 u:
 664 ifeq ($(CONFIG_LINUX26),y)
 665         @$(MAKE) bin NTFS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="BT" USB="USB" BTCLIENT=y DNSCRYPT=y
 666 else
 667         @$(MAKE) bin NTFS=y USBEXTRAS=y B=M BUILD_DESC="BT-VPN" USB="USB" BTCLIENT=y DNSCRYPT=y
 668 endif
 669
 670 ## BT-VPN
 671 t:
 672 ifeq ($(CONFIG_LINUX26),y)
 673         @$(MAKE) bin OPENVPN=y NTFS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="BT-VPN" USB="USB" BTCLIENT=y NO_JFFS=y PPTPD=y
 674 else
 675         @$(MAKE) bin OPENVPN=y NTFS=y USBEXTRAS=y B=M BUILD_DESC="BT-VPN" USB="USB" BTCLIENT=y NO_JFFS=y PPTPD=y
 676 endif
 677
 678 ## Big-VPN
 679 b:
 680 ifeq ($(CONFIG_LINUX26),y)
 681         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Big-VPN" USB="USB" BTGUI=y NFS=y NOCAT=y OPENVPN=y DNSCRYPT=y PPTPD=y
 682 else
 683         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Big-VPN" USB="USB" BTGUI=y NOCAT=y NFS=y OPENVPN=y DNSCRYPT=y PPTPD=y
 684 endif
 685
 686 ## Mega-VPN
 687 o:
 688 ifeq ($(CONFIG_LINUX26),y)
 689         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="Mega-VPN" USB="USB" NOCAT=y BTCLIENT=y DNSCRYPT=y UPS=y PPTPD=y TR_EXTRAS=y
 690 endif
 691
 692 ## All-In-One (AIO) MIPS1 - only for router with more than 8MB flash!! ZTE H618B
 693 z:
 694 ifeq ($(CONFIG_LINUX26),y)
 695         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="AIO" USB="USB" NOCAT=y BTCLIENT=y TR_EXTRAS=y NFS=y SNMP=y HFS=y DNSCRYPT=y UPS=y PPTPD=y
 696 endif
 697
 698 #################################
 699
 700 ## Mini - targeted for Netgear routers
 701 f:
 702         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_ZEBRA=y B=F BUILD_DESC="Mini" USB=""
 703
 704 ifeq ($(CONFIG_LINUX26),y)
 705 ## MiniIPv6 - for 4MB routers
 706 i:
 707         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_ZEBRA=y IPV6SUPP=y B=I BUILD_DESC="MiniIPv6" USB=""
 708 endif
 709
 710 ## VPN with no USB support (IPv6 in K26 build)
 711 v:
 712 ifeq ($(CONFIG_LINUX26),y)
 713         @$(MAKE) bin OPENVPN=y NO_JFFS=y B=V BUILD_DESC="IPv6-$(VPN)" USB="" SNMP=y PPTPD=y IPV6SUPP=y
 714 else
 715         @$(MAKE) bin OPENVPN=y BBEXTRAS=y BCM57=y B=V BUILD_DESC="$(VPN)" USB="" SNMP=y PPTPD=y
 716 endif
 717
 718 ## SD-VPN - Only k24
 719 w:
 720 ifneq ($(CONFIG_LINUX26),y)
 721         @$(MAKE) bin OPENVPN=y BBEXTRAS=y BCM57=y B=V BUILD_DESC="SD-VPN" USB="" SDHC=y SNMP=y DNSCRYPT=y PPTPD=y
 722 endif
 723
 724
 725 ## Make Mips32r2 builds ##
 726
 727 #AIO MIPS2 for RT-N16 and E4200
 728 r2z:
 729         @$(MAKE) z MIPS32=r2
 730
 731 r2e:
 732         @$(MAKE) e MIPS32=r2
 733
 734 r2c:
 735         @$(MAKE) c MIPS32=r2
 736
 737 r2u:
 738         @$(MAKE) u MIPS32=r2
 739
 740 r2t:
 741         @$(MAKE) t MIPS32=r2
 742
 743 r2d:
 744         @$(MAKE) d MIPS32=r2
 745
 746 r2b:
 747         @$(MAKE) b MIPS32=r2
 748
 749 r2o:
 750         @$(MAKE) o MIPS32=r2
 751
 752 r2f:
 753         @$(MAKE) f MIPS32=r2
 754
 755 r2i:
 756         @$(MAKE) i MIPS32=r2
 757
 758 r2v:
 759         @$(MAKE) v MIPS32=r2
 760
 761 #AIO for E4200
 762 n60z:
 763         @$(MAKE) r2z NVRAM_SIZE=60 LINKSYS_E=1
 764
 765 n60e:
 766         @$(MAKE) r2e NVRAM_SIZE=60 LINKSYS_E=1
 767
 768 n60c:
 769         @$(MAKE) r2c NVRAM_SIZE=60 LINKSYS_E=1
 770
 771 n60u:
 772         @$(MAKE) r2u NVRAM_SIZE=60 LINKSYS_E=1
 773
 774 n60t:
 775         @$(MAKE) r2t NVRAM_SIZE=60 LINKSYS_E=1
 776
 777 n60b:
 778         @$(MAKE) r2b NVRAM_SIZE=60 LINKSYS_E=1
 779
 780 n60d:
 781         @$(MAKE) r2d NVRAM_SIZE=60 LINKSYS_E=1
 782
 783 n60o:
 784         @$(MAKE) r2o NVRAM_SIZE=60 LINKSYS_E=1
 785
 786 n60v:
 787         @$(MAKE) r2v NVRAM_SIZE=60 LINKSYS_E=1
 788
 789 setprofile:
 790         echo '#ifndef TOMATO_PROFILE' > router/shared/tomato_profile.h
 791         echo '#define TOMATO_$(N) 1' >> router/shared/tomato_profile.h
 792         echo '#define PROFILE_G 1' >> router/shared/tomato_profile.h
 793         echo '#define PROFILE_N 2' >> router/shared/tomato_profile.h
 794         echo '#define TOMATO_PROFILE PROFILE_$(N)' >> router/shared/tomato_profile.h
 795         echo '#define TOMATO_PROFILE_NAME "$(N)"' >> router/shared/tomato_profile.h
 796         echo '#define TOMATO_BUILD_NAME "$(B)"' >> router/shared/tomato_profile.h
 797         echo '#define TOMATO_BUILD_DESC "$(DESC)"' >> router/shared/tomato_profile.h
 798         echo '#ifndef CONFIG_NVRAM_SIZE' >> router/shared/tomato_profile.h
 799         echo '#define CONFIG_NVRAM_SIZE $(NVRAM_SIZE)' >> router/shared/tomato_profile.h
 800         echo '#endif' >> router/shared/tomato_profile.h
 801         echo '#endif' >> router/shared/tomato_profile.h
 802
 803         echo 'TOMATO_$(N) = 1' > tomato_profile.mak
 804         echo 'PROFILE_G = 1' >> tomato_profile.mak
 805         echo 'PROFILE_N = 2' >> tomato_profile.mak
 806         echo 'TOMATO_PROFILE = $$(PROFILE_$(N))' >> tomato_profile.mak
 807         echo 'TOMATO_PROFILE_NAME = "$(N)"' >> tomato_profile.mak
 808         echo 'TOMATO_BUILD = "$(B)"' >> tomato_profile.mak
 809         echo 'TOMATO_BUILD_NAME = "$(B)"' >> tomato_profile.mak
 810         echo 'TOMATO_BUILD_DESC = "$(DESC)"' >> tomato_profile.mak
 811         echo 'TOMATO_PROFILE_L = $(lowercase_N)' >> tomato_profile.mak
 812         echo 'TOMATO_PROFILE_U = $(uppercase_N)' >> tomato_profile.mak
 813         echo 'TOMATO_BUILD_USB = "$(USB)"' >> tomato_profile.mak
 814
 815         echo 'export EXTRACFLAGS := $(EXTRA_CFLAGS) -DBCMWPA2 -funit-at-a-time -Wno-pointer-sign -mtune=mips32 -mips32 $(if $(filter $(NVRAM_SIZE),0),,-DCONFIG_NVRAM_SIZE=$(NVRAM_SIZE))' >> tomato_profile.mak
 816
 817 # Note that changes to variables in tomato_profile.mak don't
 818 # get propogated to this invocation of make!
 819         @echo ""
 820         @echo "Using $(N) profile, $(B) build config."
 821         @echo ""
 822
 823         @cd $(LINUXDIR) ; \
 824                 rm -f config_current ; \
 825                 ln -s config_$(lowercase_B) config_current ; \
 826                 cp -f config_current .config
 827
 828         @cd router/busybox && \
 829                 rm -f config_current ; \
 830                 ln -s config_$(lowercase_B) config_current ; \
 831                 cp config_current .config
 832
 833         @cd router ; \
 834                 rm -f config_current ; \
 835                 ln -s config_$(lowercase_B) config_current ; \
 836                 cp config_current .config
 837
 838         @$(MAKE) -C router oldconfig
 839
 840 help:
 841         @echo "e            VPN - (standard plus VPN, extra utilities and NTFS support)"
 842         @echo "c            BTgui-VPN - (Ext plus BT gui)"
 843         @echo "d            Nocat-VPN - (BTgui plus VPN plus Nocat)"
 844         @echo "u            BT"
 845         @echo "t            BT-VPN - (BT plus VPN)"
 846         @echo "b            Big-VPN - (Big plus VPN)"
 847         @echo "o            Mega-VPN - (Mega plus VPN plus NOCAT minus NFS)"
 848 ifeq ($(CONFIG_LINUX26),y)
 849         @echo "z            MIPS Release 15F AIO (for routers +8MB flash)"
 850         @echo "i            MiniIPv6 - (IPv6 with no USB support minus CIFS and RIPv1/2)"
 851 endif
 852         @echo "f            Mini - (no USB support minus CIFS and RIPv1/2)"
 853         @echo "v            VPN (no usb) - (VPN with no USB support)" / in K26 + IPv6 support
 854         @echo "w            SD-VPN (no usb) - (VPN with SD-MOD and no USB support)"
 855 ifeq ($(CONFIG_LINUX26),y)
 856         @echo "r2e          MIPS Release 2 VPN"
 857         @echo "r2c          MIPS Release 2 BTgui-VPN"
 858         @echo "r2d          MIPS Release 2 Nocat-VPN"
 859         @echo "r2u          MIPS Release 2 BT"
 860         @echo "r2t          MIPS Release 2 BT-VPN"
 861         @echo "r2b          MIPS Release 2 Big-VPN"
 862         @echo "r2o          MIPS Release 2 Mega-VPN"
 863         @echo "r2z          MIPS Release 2 AIO (for routers +8MB flash)"
 864         @echo "r2v          MIPS Release 2 VPN (no usb)"
 865         @echo "r2i          MIPS Release 2 MiniIPv6 (for 4MB flash)"
 866         @echo "r2f          MIPS Release 2 Mini (for netgear)"
 867         @echo "n60e         Linksys E-series build VPN"
 868         @echo "n60c         Linksys E-series build BTGui-VPN"
 869         @echo "n60d         Linksys E-series build BTGui-VPN plus Nocat"
 870         @echo "n60u         Linksys E-series build BT"
 871         @echo "n60t         Linksys E-series build BT-VPN"
 872         @echo "n60b         Linksys E-series build Big-VPN"
 873         @echo "n60o         Linksys E-series build Mega-VPN"
 874         @echo "n60z         Linksys E-series build AIO"
 875         @echo "n60v         Linksys E-series build IPv6-VPN for E2000"
 876 endif
 877         @echo "..etc..      other build configs"
 878         @echo "clean        -C router clean"
 879         @echo "cleanimage   rm -rf image"
 880         @echo "cleantools   clean btools, mksquashfs"
 881         @echo "cleankernel  -C Linux distclean (but preserves .config)"
 882         @echo "distclean    distclean of Linux & busybox (but preserve .configs)"
 883         @echo "prepk        -C Linux oldconfig dep"
 884
 885 .PHONY: all clean distclean cleanimage cleantools cleankernel prepk what setprofile help
 886 .PHONY: a b c d m nc Makefile allversions tomato_profile.mak