allow coexistance of N build and AC build.
[tomato.git] / release / src-rt-6.x / linux / linux-2.6 / arch / powerpc / platforms / powermac / time.c
blobbf9da56942e8df6bbfdaeea285d7584961970000
1 /*
2 * Support for periodic interrupts (100 per second) and for getting
3 * the current time from the RTC on Power Macintoshes.
5 * We use the decrementer register for our periodic interrupts.
7 * Paul Mackerras August 1996.
8 * Copyright (C) 1996 Paul Mackerras.
9 * Copyright (C) 2003-2005 Benjamin Herrenschmidt.
12 #include <linux/errno.h>
13 #include <linux/sched.h>
14 #include <linux/kernel.h>
15 #include <linux/param.h>
16 #include <linux/string.h>
17 #include <linux/mm.h>
18 #include <linux/init.h>
19 #include <linux/time.h>
20 #include <linux/adb.h>
21 #include <linux/cuda.h>
22 #include <linux/pmu.h>
23 #include <linux/interrupt.h>
24 #include <linux/hardirq.h>
25 #include <linux/rtc.h>
27 #include <asm/sections.h>
28 #include <asm/prom.h>
29 #include <asm/system.h>
30 #include <asm/io.h>
31 #include <asm/pgtable.h>
32 #include <asm/machdep.h>
33 #include <asm/time.h>
34 #include <asm/nvram.h>
35 #include <asm/smu.h>
37 #undef DEBUG
39 #ifdef DEBUG
40 #define DBG(x...) printk(x)
41 #else
42 #define DBG(x...)
43 #endif
45 /* Apparently the RTC stores seconds since 1 Jan 1904 */
46 #define RTC_OFFSET 2082844800
49 * Calibrate the decrementer frequency with the VIA timer 1.
51 #define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */
53 /* VIA registers */
54 #define RS 0x200 /* skip between registers */
55 #define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
56 #define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
57 #define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
58 #define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
59 #define ACR (11*RS) /* Auxiliary control register */
60 #define IFR (13*RS) /* Interrupt flag register */
62 /* Bits in ACR */
63 #define T1MODE 0xc0 /* Timer 1 mode */
64 #define T1MODE_CONT 0x40 /* continuous interrupts */
66 /* Bits in IFR and IER */
67 #define T1_INT 0x40 /* Timer 1 interrupt */
69 long __init pmac_time_init(void)
71 s32 delta = 0;
72 #ifdef CONFIG_NVRAM
73 int dst;
75 delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16;
76 delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8;
77 delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb);
78 if (delta & 0x00800000UL)
79 delta |= 0xFF000000UL;
80 dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0);
81 printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60,
82 dst ? "on" : "off");
83 #endif
84 return delta;
87 static void to_rtc_time(unsigned long now, struct rtc_time *tm)
89 to_tm(now, tm);
90 tm->tm_year -= 1900;
91 tm->tm_mon -= 1;
94 static unsigned long from_rtc_time(struct rtc_time *tm)
96 return mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
97 tm->tm_hour, tm->tm_min, tm->tm_sec);
100 #ifdef CONFIG_ADB_CUDA
101 static unsigned long cuda_get_time(void)
103 struct adb_request req;
104 unsigned int now;
106 if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0)
107 return 0;
108 while (!req.complete)
109 cuda_poll();
110 if (req.reply_len != 7)
111 printk(KERN_ERR "cuda_get_time: got %d byte reply\n",
112 req.reply_len);
113 now = (req.reply[3] << 24) + (req.reply[4] << 16)
114 + (req.reply[5] << 8) + req.reply[6];
115 return ((unsigned long)now) - RTC_OFFSET;
118 #define cuda_get_rtc_time(tm) to_rtc_time(cuda_get_time(), (tm))
120 static int cuda_set_rtc_time(struct rtc_time *tm)
122 unsigned int nowtime;
123 struct adb_request req;
125 nowtime = from_rtc_time(tm) + RTC_OFFSET;
126 if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
127 nowtime >> 24, nowtime >> 16, nowtime >> 8,
128 nowtime) < 0)
129 return -ENXIO;
130 while (!req.complete)
131 cuda_poll();
132 if ((req.reply_len != 3) && (req.reply_len != 7))
133 printk(KERN_ERR "cuda_set_rtc_time: got %d byte reply\n",
134 req.reply_len);
135 return 0;
138 #else
139 #define cuda_get_time() 0
140 #define cuda_get_rtc_time(tm)
141 #define cuda_set_rtc_time(tm) 0
142 #endif
144 #ifdef CONFIG_ADB_PMU
145 static unsigned long pmu_get_time(void)
147 struct adb_request req;
148 unsigned int now;
150 if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
151 return 0;
152 pmu_wait_complete(&req);
153 if (req.reply_len != 4)
154 printk(KERN_ERR "pmu_get_time: got %d byte reply from PMU\n",
155 req.reply_len);
156 now = (req.reply[0] << 24) + (req.reply[1] << 16)
157 + (req.reply[2] << 8) + req.reply[3];
158 return ((unsigned long)now) - RTC_OFFSET;
161 #define pmu_get_rtc_time(tm) to_rtc_time(pmu_get_time(), (tm))
163 static int pmu_set_rtc_time(struct rtc_time *tm)
165 unsigned int nowtime;
166 struct adb_request req;
168 nowtime = from_rtc_time(tm) + RTC_OFFSET;
169 if (pmu_request(&req, NULL, 5, PMU_SET_RTC, nowtime >> 24,
170 nowtime >> 16, nowtime >> 8, nowtime) < 0)
171 return -ENXIO;
172 pmu_wait_complete(&req);
173 if (req.reply_len != 0)
174 printk(KERN_ERR "pmu_set_rtc_time: %d byte reply from PMU\n",
175 req.reply_len);
176 return 0;
179 #else
180 #define pmu_get_time() 0
181 #define pmu_get_rtc_time(tm)
182 #define pmu_set_rtc_time(tm) 0
183 #endif
185 #ifdef CONFIG_PMAC_SMU
186 static unsigned long smu_get_time(void)
188 struct rtc_time tm;
190 if (smu_get_rtc_time(&tm, 1))
191 return 0;
192 return from_rtc_time(&tm);
195 #else
196 #define smu_get_time() 0
197 #define smu_get_rtc_time(tm, spin)
198 #define smu_set_rtc_time(tm, spin) 0
199 #endif
201 /* Can't be __init, it's called when suspending and resuming */
202 unsigned long pmac_get_boot_time(void)
204 /* Get the time from the RTC, used only at boot time */
205 switch (sys_ctrler) {
206 case SYS_CTRLER_CUDA:
207 return cuda_get_time();
208 case SYS_CTRLER_PMU:
209 return pmu_get_time();
210 case SYS_CTRLER_SMU:
211 return smu_get_time();
212 default:
213 return 0;
217 void pmac_get_rtc_time(struct rtc_time *tm)
219 /* Get the time from the RTC, used only at boot time */
220 switch (sys_ctrler) {
221 case SYS_CTRLER_CUDA:
222 cuda_get_rtc_time(tm);
223 break;
224 case SYS_CTRLER_PMU:
225 pmu_get_rtc_time(tm);
226 break;
227 case SYS_CTRLER_SMU:
228 smu_get_rtc_time(tm, 1);
229 break;
230 default:
235 int pmac_set_rtc_time(struct rtc_time *tm)
237 switch (sys_ctrler) {
238 case SYS_CTRLER_CUDA:
239 return cuda_set_rtc_time(tm);
240 case SYS_CTRLER_PMU:
241 return pmu_set_rtc_time(tm);
242 case SYS_CTRLER_SMU:
243 return smu_set_rtc_time(tm, 1);
244 default:
245 return -ENODEV;
249 #ifdef CONFIG_PPC32
251 * Calibrate the decrementer register using VIA timer 1.
252 * This is used both on powermacs and CHRP machines.
254 int __init via_calibrate_decr(void)
256 struct device_node *vias;
257 volatile unsigned char __iomem *via;
258 int count = VIA_TIMER_FREQ_6 / 100;
259 unsigned int dstart, dend;
260 struct resource rsrc;
262 vias = of_find_node_by_name(NULL, "via-cuda");
263 if (vias == 0)
264 vias = of_find_node_by_name(NULL, "via-pmu");
265 if (vias == 0)
266 vias = of_find_node_by_name(NULL, "via");
267 if (vias == 0 || of_address_to_resource(vias, 0, &rsrc))
268 return 0;
269 via = ioremap(rsrc.start, rsrc.end - rsrc.start + 1);
270 if (via == NULL) {
271 printk(KERN_ERR "Failed to map VIA for timer calibration !\n");
272 return 0;
275 /* set timer 1 for continuous interrupts */
276 out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT);
277 /* set the counter to a small value */
278 out_8(&via[T1CH], 2);
279 /* set the latch to `count' */
280 out_8(&via[T1LL], count);
281 out_8(&via[T1LH], count >> 8);
282 /* wait until it hits 0 */
283 while ((in_8(&via[IFR]) & T1_INT) == 0)
285 dstart = get_dec();
286 /* clear the interrupt & wait until it hits 0 again */
287 in_8(&via[T1CL]);
288 while ((in_8(&via[IFR]) & T1_INT) == 0)
290 dend = get_dec();
292 ppc_tb_freq = (dstart - dend) * 100 / 6;
294 iounmap(via);
296 return 1;
298 #endif
301 * Query the OF and get the decr frequency.
303 void __init pmac_calibrate_decr(void)
305 generic_calibrate_decr();
307 #ifdef CONFIG_PPC32
308 /* We assume MacRISC2 machines have correct device-tree
309 * calibration. That's better since the VIA itself seems
310 * to be slightly off. --BenH
312 if (!machine_is_compatible("MacRISC2") &&
313 !machine_is_compatible("MacRISC3") &&
314 !machine_is_compatible("MacRISC4"))
315 if (via_calibrate_decr())
316 return;
318 /* Special case: QuickSilver G4s seem to have a badly calibrated
319 * timebase-frequency in OF, VIA is much better on these. We should
320 * probably implement calibration based on the KL timer on these
321 * machines anyway... -BenH
323 if (machine_is_compatible("PowerMac3,5"))
324 if (via_calibrate_decr())
325 return;
326 #endif