allow coexistance of N build and AC build.
[tomato.git] / release / src-rt-6.x / linux / linux-2.6 / arch / i386 / kernel / tsc.c
blob8e02ed65b73da0023fa35793781b97fcbcda6b41
1 /*
2 * This code largely moved from arch/i386/kernel/timer/timer_tsc.c
3 * which was originally moved from arch/i386/kernel/time.c.
4 * See comments there for proper credits.
5 */
7 #include <linux/clocksource.h>
8 #include <linux/workqueue.h>
9 #include <linux/cpufreq.h>
10 #include <linux/jiffies.h>
11 #include <linux/init.h>
12 #include <linux/dmi.h>
14 #include <asm/delay.h>
15 #include <asm/tsc.h>
16 #include <asm/io.h>
17 #include <asm/timer.h>
19 #include "mach_timer.h"
21 static int tsc_enabled;
24 * On some systems the TSC frequency does not
25 * change with the cpu frequency. So we need
26 * an extra value to store the TSC freq
28 unsigned int tsc_khz;
30 int tsc_disable;
32 #ifdef CONFIG_X86_TSC
33 static int __init tsc_setup(char *str)
35 printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
36 "cannot disable TSC.\n");
37 return 1;
39 #else
41 * disable flag for tsc. Takes effect by clearing the TSC cpu flag
42 * in cpu/common.c
44 static int __init tsc_setup(char *str)
46 tsc_disable = 1;
48 return 1;
50 #endif
52 __setup("notsc", tsc_setup);
55 * code to mark and check if the TSC is unstable
56 * due to cpufreq or due to unsynced TSCs
58 static int tsc_unstable;
60 static inline int check_tsc_unstable(void)
62 return tsc_unstable;
65 /* Accellerators for sched_clock()
66 * convert from cycles(64bits) => nanoseconds (64bits)
67 * basic equation:
68 * ns = cycles / (freq / ns_per_sec)
69 * ns = cycles * (ns_per_sec / freq)
70 * ns = cycles * (10^9 / (cpu_khz * 10^3))
71 * ns = cycles * (10^6 / cpu_khz)
73 * Then we use scaling math (suggested by george@mvista.com) to get:
74 * ns = cycles * (10^6 * SC / cpu_khz) / SC
75 * ns = cycles * cyc2ns_scale / SC
77 * And since SC is a constant power of two, we can convert the div
78 * into a shift.
80 * We can use khz divisor instead of mhz to keep a better percision, since
81 * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
82 * (mathieu.desnoyers@polymtl.ca)
84 * -johnstul@us.ibm.com "math is hard, lets go shopping!"
86 static unsigned long cyc2ns_scale __read_mostly;
88 #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
90 static inline void set_cyc2ns_scale(unsigned long cpu_khz)
92 cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
95 static inline unsigned long long cycles_2_ns(unsigned long long cyc)
97 return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
101 * Scheduler clock - returns current time in nanosec units.
103 unsigned long long sched_clock(void)
105 unsigned long long this_offset;
108 * Fall back to jiffies if there's no TSC available:
110 if (unlikely(!tsc_enabled))
111 /* No locking but a rare wrong value is not a big deal: */
112 return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
114 /* read the Time Stamp Counter: */
115 get_scheduled_cycles(this_offset);
117 /* return the value in ns */
118 return cycles_2_ns(this_offset);
121 unsigned long native_calculate_cpu_khz(void)
123 unsigned long long start, end;
124 unsigned long count;
125 u64 delta64 = (u64)ULLONG_MAX;
126 int i;
127 unsigned long flags;
129 local_irq_save(flags);
131 /* run 3 times to ensure the cache is warm */
132 for (i = 0; i < 3; i++) {
133 mach_prepare_counter();
134 rdtscll(start);
135 mach_countup(&count);
136 rdtscll(end);
137 delta64 = min(delta64, (end - start));
140 * Error: ECTCNEVERSET
141 * The CTC wasn't reliable: we got a hit on the very first read,
142 * or the CPU was so fast/slow that the quotient wouldn't fit in
143 * 32 bits..
145 if (count <= 1)
146 goto err;
148 /* cpu freq too fast: */
149 if (delta64 > (1ULL<<32))
150 goto err;
152 /* cpu freq too slow: */
153 if (delta64 <= CALIBRATE_TIME_MSEC)
154 goto err;
156 delta64 += CALIBRATE_TIME_MSEC/2; /* round for do_div */
157 do_div(delta64,CALIBRATE_TIME_MSEC);
159 local_irq_restore(flags);
160 return (unsigned long)delta64;
161 err:
162 local_irq_restore(flags);
163 return 0;
166 int recalibrate_cpu_khz(void)
168 #ifndef CONFIG_SMP
169 unsigned long cpu_khz_old = cpu_khz;
171 if (cpu_has_tsc) {
172 cpu_khz = calculate_cpu_khz();
173 tsc_khz = cpu_khz;
174 cpu_data[0].loops_per_jiffy =
175 cpufreq_scale(cpu_data[0].loops_per_jiffy,
176 cpu_khz_old, cpu_khz);
177 return 0;
178 } else
179 return -ENODEV;
180 #else
181 return -ENODEV;
182 #endif
185 EXPORT_SYMBOL(recalibrate_cpu_khz);
187 #ifdef CONFIG_CPU_FREQ
190 * if the CPU frequency is scaled, TSC-based delays will need a different
191 * loops_per_jiffy value to function properly.
193 static unsigned int ref_freq = 0;
194 static unsigned long loops_per_jiffy_ref = 0;
195 static unsigned long cpu_khz_ref = 0;
197 static int
198 time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data)
200 struct cpufreq_freqs *freq = data;
202 if (!ref_freq) {
203 if (!freq->old){
204 ref_freq = freq->new;
205 return 0;
207 ref_freq = freq->old;
208 loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy;
209 cpu_khz_ref = cpu_khz;
212 if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) ||
213 (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
214 (val == CPUFREQ_RESUMECHANGE)) {
215 if (!(freq->flags & CPUFREQ_CONST_LOOPS))
216 cpu_data[freq->cpu].loops_per_jiffy =
217 cpufreq_scale(loops_per_jiffy_ref,
218 ref_freq, freq->new);
220 if (cpu_khz) {
222 if (num_online_cpus() == 1)
223 cpu_khz = cpufreq_scale(cpu_khz_ref,
224 ref_freq, freq->new);
225 if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
226 tsc_khz = cpu_khz;
227 set_cyc2ns_scale(cpu_khz);
229 * TSC based sched_clock turns
230 * to junk w/ cpufreq
232 mark_tsc_unstable("cpufreq changes");
237 return 0;
240 static struct notifier_block time_cpufreq_notifier_block = {
241 .notifier_call = time_cpufreq_notifier
244 static int __init cpufreq_tsc(void)
246 return cpufreq_register_notifier(&time_cpufreq_notifier_block,
247 CPUFREQ_TRANSITION_NOTIFIER);
249 core_initcall(cpufreq_tsc);
251 #endif
253 /* clock source code */
255 static unsigned long current_tsc_khz = 0;
257 static cycle_t read_tsc(void)
259 cycle_t ret;
261 rdtscll(ret);
263 return ret;
266 static struct clocksource clocksource_tsc = {
267 .name = "tsc",
268 .rating = 300,
269 .read = read_tsc,
270 .mask = CLOCKSOURCE_MASK(64),
271 .mult = 0, /* to be set */
272 .shift = 22,
273 .flags = CLOCK_SOURCE_IS_CONTINUOUS |
274 CLOCK_SOURCE_MUST_VERIFY,
277 void mark_tsc_unstable(char *reason)
279 if (!tsc_unstable) {
280 tsc_unstable = 1;
281 tsc_enabled = 0;
282 printk("Marking TSC unstable due to: %s.\n", reason);
283 /* Can be called before registration */
284 if (clocksource_tsc.mult)
285 clocksource_change_rating(&clocksource_tsc, 0);
286 else
287 clocksource_tsc.rating = 0;
290 EXPORT_SYMBOL_GPL(mark_tsc_unstable);
292 static int __init dmi_mark_tsc_unstable(struct dmi_system_id *d)
294 printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
295 d->ident);
296 tsc_unstable = 1;
297 return 0;
300 /* List of systems that have known TSC problems */
301 static struct dmi_system_id __initdata bad_tsc_dmi_table[] = {
303 .callback = dmi_mark_tsc_unstable,
304 .ident = "IBM Thinkpad 380XD",
305 .matches = {
306 DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
307 DMI_MATCH(DMI_BOARD_NAME, "2635FA0"),
314 * Make an educated guess if the TSC is trustworthy and synchronized
315 * over all CPUs.
317 __cpuinit int unsynchronized_tsc(void)
319 if (!cpu_has_tsc || tsc_unstable)
320 return 1;
322 * Intel systems are normally all synchronized.
323 * Exceptions must mark TSC as unstable:
325 if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) {
326 /* assume multi socket systems are not synchronized: */
327 if (num_possible_cpus() > 1)
328 tsc_unstable = 1;
330 return tsc_unstable;
334 * Geode_LX - the OLPC CPU has a possibly a very reliable TSC
336 #ifdef CONFIG_MGEODE_LX
337 /* RTSC counts during suspend */
338 #define RTSC_SUSP 0x100
340 static void __init check_geode_tsc_reliable(void)
342 unsigned long val;
344 rdmsrl(MSR_GEODE_BUSCONT_CONF0, val);
345 if ((val & RTSC_SUSP))
346 clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
348 #else
349 static inline void check_geode_tsc_reliable(void) { }
350 #endif
353 void __init tsc_init(void)
355 if (!cpu_has_tsc || tsc_disable)
356 goto out_no_tsc;
358 cpu_khz = calculate_cpu_khz();
359 tsc_khz = cpu_khz;
361 if (!cpu_khz)
362 goto out_no_tsc;
364 printk("Detected %lu.%03lu MHz processor.\n",
365 (unsigned long)cpu_khz / 1000,
366 (unsigned long)cpu_khz % 1000);
368 set_cyc2ns_scale(cpu_khz);
369 use_tsc_delay();
371 /* Check and install the TSC clocksource */
372 dmi_check_system(bad_tsc_dmi_table);
374 unsynchronized_tsc();
375 check_geode_tsc_reliable();
376 current_tsc_khz = tsc_khz;
377 clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
378 clocksource_tsc.shift);
379 /* lower the rating if we already know its unstable: */
380 if (check_tsc_unstable()) {
381 clocksource_tsc.rating = 0;
382 clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
383 } else
384 tsc_enabled = 1;
386 clocksource_register(&clocksource_tsc);
388 return;
390 out_no_tsc:
392 * Set the tsc_disable flag if there's no TSC support, this
393 * makes it a fast flag for the kernel to see whether it
394 * should be using the TSC.
396 tsc_disable = 1;