OpenSSL: update to 1.0.2c
[tomato.git] / release / src / router / openssl / doc / apps / s_client.pod
blob84d0527069418db99c1f59ae46f28304cf6dc277
2 =pod
4 =head1 NAME
6 s_client - SSL/TLS client program
8 =head1 SYNOPSIS
10 B<openssl> B<s_client>
11 [B<-connect host:port>]
12 [B<-servername name>]
13 [B<-verify depth>]
14 [B<-verify_return_error>]
15 [B<-cert filename>]
16 [B<-certform DER|PEM>]
17 [B<-key filename>]
18 [B<-keyform DER|PEM>]
19 [B<-pass arg>]
20 [B<-CApath directory>]
21 [B<-CAfile filename>]
22 [B<-no_alt_chains>]
23 [B<-reconnect>]
24 [B<-pause>]
25 [B<-showcerts>]
26 [B<-debug>]
27 [B<-msg>]
28 [B<-nbio_test>]
29 [B<-state>]
30 [B<-nbio>]
31 [B<-crlf>]
32 [B<-ign_eof>]
33 [B<-no_ign_eof>]
34 [B<-quiet>]
35 [B<-ssl2>]
36 [B<-ssl3>]
37 [B<-tls1>]
38 [B<-no_ssl2>]
39 [B<-no_ssl3>]
40 [B<-no_tls1>]
41 [B<-no_tls1_1>]
42 [B<-no_tls1_2>]
43 [B<-fallback_scsv>]
44 [B<-bugs>]
45 [B<-cipher cipherlist>]
46 [B<-serverpref>]
47 [B<-starttls protocol>]
48 [B<-engine id>]
49 [B<-tlsextdebug>]
50 [B<-no_ticket>]
51 [B<-sess_out filename>]
52 [B<-sess_in filename>]
53 [B<-rand file(s)>]
54 [B<-serverinfo types>]
55 [B<-status>]
56 [B<-nextprotoneg protocols>]
58 =head1 DESCRIPTION
60 The B<s_client> command implements a generic SSL/TLS client which connects
61 to a remote host using SSL/TLS. It is a I<very> useful diagnostic tool for
62 SSL servers.
64 =head1 OPTIONS
66 =over 4
68 =item B<-connect host:port>
70 This specifies the host and optional port to connect to. If not specified
71 then an attempt is made to connect to the local host on port 4433.
73 =item B<-servername name>
75 Set the TLS SNI (Server Name Indication) extension in the ClientHello message.
77 =item B<-cert certname>
79 The certificate to use, if one is requested by the server. The default is
80 not to use a certificate.
82 =item B<-certform format>
84 The certificate format to use: DER or PEM. PEM is the default.
86 =item B<-key keyfile>
88 The private key to use. If not specified then the certificate file will
89 be used.
91 =item B<-keyform format>
93 The private format to use: DER or PEM. PEM is the default.
95 =item B<-pass arg>
97 the private key password source. For more information about the format of B<arg>
98 see the B<PASS PHRASE ARGUMENTS> section in L<openssl(1)|openssl(1)>.
100 =item B<-verify depth>
102 The verify depth to use. This specifies the maximum length of the
103 server certificate chain and turns on server certificate verification.
104 Currently the verify operation continues after errors so all the problems
105 with a certificate chain can be seen. As a side effect the connection
106 will never fail due to a server certificate verify failure.
108 =item B<-verify_return_error>
110 Return verification errors instead of continuing. This will typically
111 abort the handshake with a fatal error.
113 =item B<-CApath directory>
115 The directory to use for server certificate verification. This directory
116 must be in "hash format", see B<verify> for more information. These are
117 also used when building the client certificate chain.
119 =item B<-CAfile file>
121 A file containing trusted certificates to use during server authentication
122 and to use when attempting to build the client certificate chain.
124 =item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy -check_ss_sig -no_alt_chains>
126 Set various certificate chain valiadition option. See the
127 L<B<verify>|verify(1)> manual page for details.
129 =item B<-reconnect>
131 reconnects to the same server 5 times using the same session ID, this can
132 be used as a test that session caching is working.
134 =item B<-pause>
136 pauses 1 second between each read and write call.
138 =item B<-showcerts>
140 display the whole server certificate chain: normally only the server
141 certificate itself is displayed.
143 =item B<-prexit>
145 print session information when the program exits. This will always attempt
146 to print out information even if the connection fails. Normally information
147 will only be printed out once if the connection succeeds. This option is useful
148 because the cipher in use may be renegotiated or the connection may fail
149 because a client certificate is required or is requested only after an
150 attempt is made to access a certain URL. Note: the output produced by this
151 option is not always accurate because a connection might never have been
152 established.
154 =item B<-state>
156 prints out the SSL session states.
158 =item B<-debug>
160 print extensive debugging information including a hex dump of all traffic.
162 =item B<-msg>
164 show all protocol messages with hex dump.
166 =item B<-nbio_test>
168 tests non-blocking I/O
170 =item B<-nbio>
172 turns on non-blocking I/O
174 =item B<-crlf>
176 this option translated a line feed from the terminal into CR+LF as required
177 by some servers.
179 =item B<-ign_eof>
181 inhibit shutting down the connection when end of file is reached in the
182 input.
184 =item B<-quiet>
186 inhibit printing of session and certificate information.  This implicitly
187 turns on B<-ign_eof> as well.
189 =item B<-no_ign_eof>
191 shut down the connection when end of file is reached in the input.
192 Can be used to override the implicit B<-ign_eof> after B<-quiet>.
194 =item B<-psk_identity identity>
196 Use the PSK identity B<identity> when using a PSK cipher suite.
198 =item B<-psk key>
200 Use the PSK key B<key> when using a PSK cipher suite. The key is
201 given as a hexadecimal number without leading 0x, for example -psk
202 1a2b3c4d.
204 =item B<-ssl2>, B<-ssl3>, B<-tls1>, B<-no_ssl2>, B<-no_ssl3>, B<-no_tls1>, B<-no_tls1_1>, B<-no_tls1_2>
206 these options disable the use of certain SSL or TLS protocols. By default
207 the initial handshake uses a method which should be compatible with all
208 servers and permit them to use SSL v3, SSL v2 or TLS as appropriate.
210 Unfortunately there are still ancient and broken servers in use which
211 cannot handle this technique and will fail to connect. Some servers only
212 work if TLS is turned off.
214 =item B<-fallback_scsv>
216 Send TLS_FALLBACK_SCSV in the ClientHello.
218 =item B<-bugs>
220 there are several known bug in SSL and TLS implementations. Adding this
221 option enables various workarounds.
223 =item B<-cipher cipherlist>
225 this allows the cipher list sent by the client to be modified. Although
226 the server determines which cipher suite is used it should take the first
227 supported cipher in the list sent by the client. See the B<ciphers>
228 command for more information.
230 =item B<-serverpref>
232 use the server's cipher preferences; only used for SSLV2.
234 =item B<-starttls protocol>
236 send the protocol-specific message(s) to switch to TLS for communication.
237 B<protocol> is a keyword for the intended protocol.  Currently, the only
238 supported keywords are "smtp", "pop3", "imap", and "ftp".
240 =item B<-tlsextdebug>
242 print out a hex dump of any TLS extensions received from the server.
244 =item B<-no_ticket>
246 disable RFC4507bis session ticket support. 
248 =item B<-sess_out filename>
250 output SSL session to B<filename>
252 =item B<-sess_in sess.pem>
254 load SSL session from B<filename>. The client will attempt to resume a
255 connection from this session.
257 =item B<-engine id>
259 specifying an engine (by its unique B<id> string) will cause B<s_client>
260 to attempt to obtain a functional reference to the specified engine,
261 thus initialising it if needed. The engine will then be set as the default
262 for all available algorithms.
264 =item B<-rand file(s)>
266 a file or files containing random data used to seed the random number
267 generator, or an EGD socket (see L<RAND_egd(3)|RAND_egd(3)>).
268 Multiple files can be specified separated by a OS-dependent character.
269 The separator is B<;> for MS-Windows, B<,> for OpenVMS, and B<:> for
270 all others.
272 =item B<-serverinfo types>
274 a list of comma-separated TLS Extension Types (numbers between 0 and 
275 65535).  Each type will be sent as an empty ClientHello TLS Extension.
276 The server's response (if any) will be encoded and displayed as a PEM
277 file.
279 =item B<-status>
281 sends a certificate status request to the server (OCSP stapling). The server
282 response (if any) is printed out.
284 =item B<-nextprotoneg protocols>
286 enable Next Protocol Negotiation TLS extension and provide a list of
287 comma-separated protocol names that the client should advertise
288 support for. The list should contain most wanted protocols first.
289 Protocol names are printable ASCII strings, for example "http/1.1" or
290 "spdy/3".
291 Empty list of protocols is treated specially and will cause the client to
292 advertise support for the TLS extension but disconnect just after
293 reciving ServerHello with a list of server supported protocols.
295 =back
297 =head1 CONNECTED COMMANDS
299 If a connection is established with an SSL server then any data received
300 from the server is displayed and any key presses will be sent to the
301 server. When used interactively (which means neither B<-quiet> nor B<-ign_eof>
302 have been given), the session will be renegotiated if the line begins with an
303 B<R>, and if the line begins with a B<Q> or if end of file is reached, the
304 connection will be closed down.
306 =head1 NOTES
308 B<s_client> can be used to debug SSL servers. To connect to an SSL HTTP
309 server the command:
311  openssl s_client -connect servername:443
313 would typically be used (https uses port 443). If the connection succeeds
314 then an HTTP command can be given such as "GET /" to retrieve a web page.
316 If the handshake fails then there are several possible causes, if it is
317 nothing obvious like no client certificate then the B<-bugs>, B<-ssl2>,
318 B<-ssl3>, B<-tls1>, B<-no_ssl2>, B<-no_ssl3>, B<-no_tls1> options can be tried
319 in case it is a buggy server. In particular you should play with these
320 options B<before> submitting a bug report to an OpenSSL mailing list.
322 A frequent problem when attempting to get client certificates working
323 is that a web client complains it has no certificates or gives an empty
324 list to choose from. This is normally because the server is not sending
325 the clients certificate authority in its "acceptable CA list" when it
326 requests a certificate. By using B<s_client> the CA list can be viewed
327 and checked. However some servers only request client authentication
328 after a specific URL is requested. To obtain the list in this case it
329 is necessary to use the B<-prexit> option and send an HTTP request
330 for an appropriate page.
332 If a certificate is specified on the command line using the B<-cert>
333 option it will not be used unless the server specifically requests
334 a client certificate. Therefor merely including a client certificate
335 on the command line is no guarantee that the certificate works.
337 If there are problems verifying a server certificate then the
338 B<-showcerts> option can be used to show the whole chain.
340 Since the SSLv23 client hello cannot include compression methods or extensions
341 these will only be supported if its use is disabled, for example by using the
342 B<-no_sslv2> option.
344 The B<s_client> utility is a test tool and is designed to continue the
345 handshake after any certificate verification errors. As a result it will
346 accept any certificate chain (trusted or not) sent by the peer. None test
347 applications should B<not> do this as it makes them vulnerable to a MITM
348 attack. This behaviour can be changed by with the B<-verify_return_error>
349 option: any verify errors are then returned aborting the handshake.
351 =head1 BUGS
353 Because this program has a lot of options and also because some of
354 the techniques used are rather old, the C source of s_client is rather
355 hard to read and not a model of how things should be done. A typical
356 SSL client program would be much simpler.
358 The B<-prexit> option is a bit of a hack. We should really report
359 information whenever a session is renegotiated.
361 =head1 SEE ALSO
363 L<sess_id(1)|sess_id(1)>, L<s_server(1)|s_server(1)>, L<ciphers(1)|ciphers(1)>
365 =head1 HISTORY
367 The -no_alt_chains options was first added to OpenSSL 1.0.2b.
369 =cut