release/src/Makefile

   1 #
   2 # Toplevel Makefile for the BCM947xx Linux Router release
   3 #
   4 # Copyright 2005, Broadcom Corporation
   5 # All Rights Reserved.
   6 #
   7 # THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   8 # KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
   9 # SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  10 # FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  11 #
  12 # $Id: Makefile,v 1.53 2005/04/25 03:54:37 tallest Exp $
  13 #
  14
  15 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  16
  17 # To rebuild everything and all configurations:
  18 #  make distclean
  19 #  make V1=whatever V2=sub-whatever VPN=vpn3.6 a b c d m
  20 # The 1st "whatever" would be the build number, the sub-whatever would
  21 #       be the update to the version.
  22 #
  23 # Example:
  24 # make V1=8516 V2="-jffs.1" a b c d m s
  25
  26 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  27
  28
  29
  30 export SRCBASE := $(shell pwd)
  31 RELEASEDIR := $(shell (cd $(SRCBASE)/.. && pwd -P))
  32 PATH := $(RELEASEDIR)/tools:$(PATH)
  33 export TPROFILE := N
  34
  35 include ./target.mak
  36
  37 # Normally you'd do something like "make V1=8516 V2=-sub-ver a b c d"
  38 # But if you don't give anything for "V1", it'll get a default from tomato_version.
  39 V1 ?= "--def"
  40 VPN ?= "VPN"
  41 ifeq ($(CONFIG_LINUX26),y)
  42 ND = "K26"
  43 else
  44 ND = "ND"
  45 endif
  46
  47 ifeq ($(NVRAM_SIZE),)
  48 NVRAM_SIZE = 0
  49 endif
  50
  51 -include tomato_profile.mak
  52
  53 # This could be simpler by just using $(TOMATO_PROFILE_NAME) like it used to be,
  54 # but that's fragile.  If you make one certain innocuous change elsewhere in the
  55 # makefile(s), the build will silently be wrong.  This way it works properly every time.
  56 current_BUILD_NAME = $(strip $(shell grep "^TOMATO_BUILD_NAME" tomato_profile.mak  | cut -d"=" -f2))
  57 current_BUILD_DESC = $(strip $(shell grep "^TOMATO_BUILD_DESC" tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  58 current_BUILD_USB  = $(strip $(shell grep "^TOMATO_BUILD_USB"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  59 current_TOMATO_VER = $(strip $(shell grep "TOMATO_MAJOR" router/shared/tomato_version.h  | cut -d"\"" -f2)).$(strip $(shell grep "TOMATO_MINOR" router/shared/tomato_version.h  | cut -d"\"" -f2))
  60
  61 uppercase_N = $(shell echo $(N) | tr a-z  A-Z)
  62 lowercase_N = $(shell echo $(N) | tr A-Z a-z)
  63 uppercase_B = $(shell echo $(B) | tr a-z  A-Z)
  64 lowercase_B = $(shell echo $(B) | tr A-Z a-z)
  65
  66 ifeq ($(CONFIG_LINUX26),y)
  67 mips_rev = $(if $(filter $(MIPS32),r2),MIPSR2,MIPSR1)
  68 KERN_SIZE_OPT ?= n
  69 else
  70 mips_rev =
  71 KERN_SIZE_OPT ?= y
  72 endif
  73
  74 beta = $(if $(filter $(TOMATO_EXPERIMENTAL),1),-beta,)
  75
  76 tomato_ver:
  77         @echo ""
  78         @btools/uversion.pl --gen $(V1) $(mips_rev)$(beta)$(V2) $(ND) $(current_BUILD_USB) $(current_BUILD_DESC)
  79
  80 ifeq ($(TOMATO_BUILD),)
  81
  82 all:
  83         $(MAKE) a
  84
  85 else
  86
  87 all: tomato_ver
  88         @echo ""
  89         @echo "Building Tomato $(ND) $(current_BUILD_USB) $(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2) $(current_BUILD_DESC) $(current_BUILD_NAME) with $(TOMATO_PROFILE_NAME) Profile"
  90
  91         @echo ""
  92         @echo ""
  93
  94         @-mkdir image
  95         @$(MAKE) -C router all
  96         @$(MAKE) -C router install
  97         @$(MAKE) -C btools
  98
  99         @rm -f image/tomato-$(ND)$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx
 100         @rm -f image/tomato-$(ND)$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 101         @echo "" >>fpkg.log
 102         @echo "***********************" `date` "************************" >>fpkg.log
 103         @cat router/shared/tomato_version >>fpkg.log
 104         @echo "" >>fpkg.log
 105         @cat router/target.info >>fpkg.log
 106 ifeq ($(wildcard include/bcm20xx.h),)
 107         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 108                 -t image/tomato.trx \
 109                 -l W54G,image/WRT54G_WRT54GL.bin \
 110                 -l W54S,image/WRT54GS.bin \
 111                 -l W54s,image/WRT54GSv4.bin \
 112                 -l W54U,image/WRTSL54GS.bin \
 113                 -m 0x10577050,image/WR850G.bin \
 114                 | tee -a fpkg.log
 115 else
 116 ifeq ($(NVRAM_SIZE),60)
 117 ifeq ($(USB),USB)
 118         # Linksys E3000 build
 119         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 120                 -l 61XN,image/tomato-$(ND)$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 121                 | tee -a fpkg.log
 122 else
 123         # Linksys E2000 build
 124         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 125                 -l 32XN,image/tomato-$(ND)$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 126                 | tee -a fpkg.log
 127 endif
 128 else
 129         # Create generic TRX image
 130         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 131                 -t image/tomato-$(ND)$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 132                 | tee -a fpkg.log
 133 endif
 134 endif
 135
 136         @cp fpkg.log image/fpkg-$(V1)$(mips_rev)$(beta)$(V2).log
 137         @echo ""
 138         @echo "-----------------"
 139         @echo `cat router/shared/tomato_version` " ready"
 140         @echo "-----------------"
 141 ifneq ($(NOVERSION),1)
 142         @cp router/shared/tomato_version router/shared/tomato_version_last
 143         @btools/uversion.pl --bump
 144 endif
 145 endif
 146
 147
 148
 149 clean:
 150         @touch router/.config
 151         @rm -f router/config_[a-z]
 152         @rm -f router/busybox/config_[a-z]
 153         @$(MAKE) -C router $@
 154         @-rmdir router/mipsel-uclibc
 155
 156 cleanimage:
 157         @rm -f fpkg.log
 158         @rm -fr image/*
 159         @rm -f router/.config
 160         @touch router/.config
 161         @-mkdir image
 162
 163 cleantools:
 164         @$(MAKE) -C $(LINUXDIR)/scripts/squashfs clean
 165         @$(MAKE) -C btools clean
 166
 167 cleankernel:
 168         @cd $(LINUXDIR) && \
 169         mv .config save-config && \
 170         $(MAKE) distclean || true; \
 171         cp -p save-config .config || true
 172
 173 kernel:
 174         @$(MAKE) -C router kernel
 175         @ls -l $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/zImage
 176
 177 distclean: clean cleanimage cleankernel cleantools
 178 ifneq ($(INSIDE_MAK),1)
 179         @$(MAKE) -C router $@ INSIDE_MAK=1
 180 endif
 181         mv router/busybox/.config busybox-saved-config || true
 182         @$(MAKE) -C router/busybox distclean
 183         @rm -f router/busybox/config_current
 184         @cp -p busybox-saved-config router/busybox/.config || true
 185         @cp -p router/busybox/.config  router/busybox/config_current || true
 186         @rm -f router/config_current
 187         @rm -f router/.config.cmd router/.config.old router/.config
 188         @rm -f router/libfoo_xref.txt
 189         @rm -f tomato_profile.mak router/shared/tomato_profile.h
 190         @touch tomato_profile.mak
 191         @touch router/shared/tomato_profile.h
 192
 193
 194 prepk:
 195         @cd $(LINUXDIR) ; \
 196                 rm -f config_current ; \
 197                 ln -s config_base config_current ; \
 198                 cp -f config_current .config
 199         $(MAKE) -C $(LINUXDIR) oldconfig dep
 200
 201 what:
 202         @echo ""
 203         @echo "$(current_BUILD_DESC)-$(current_BUILD_NAME)-$(TOMATO_PROFILE_NAME) Profile"
 204         @echo ""
 205
 206
 207 # The methodology for making the different builds is to
 208 # copy the "base" config file to the "target" config file in
 209 # the appropriate directory, and then edit it by removing and
 210 # inserting the desired configuration lines.
 211 # You can't just delete the "whatever=y" line, you must have
 212 # a "...is not set" line, or the make oldconfig will stop and ask
 213 # what to do.
 214
 215 # Options for "make bin" :
 216 # BUILD_DESC (Std|Lite|Ext|...)
 217 # MIPS32 (r2|r1)
 218 # KERN_SIZE_OPT
 219 # USB ("USB"|"")
 220 # JFFSv1 | NO_JFFS
 221 # NO_CIFS, NO_SSH, NO_ZEBRA, NO_SAMBA, NO_HTTPS, NO_XXTP, NO_LIBOPT
 222 # SAMBA3, OPENVPN, IPV6SUPP, EBTABLES, NTFS, MEDIASRV, BBEXTRAS, USBEXTRAS, BCM57, SLIM
 223
 224 define RouterOptions
 225         @( \
 226         if [ "$(CONFIG_LINUX26)" = "y" ] || [ "$(SAMBA3)" = "y" ]; then \
 227                 sed -i "/TCONFIG_SAMBA3/d" $(1); \
 228                 echo "TCONFIG_SAMBA3=y" >>$(1); \
 229         fi; \
 230         sed -i "/TCONFIG_EMF/d" $(1); \
 231         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 232                 if [ "$(SLIM)" = "y" ]; then \
 233                         echo "# TCONFIG_EMF is not set" >>$(1); \
 234                 else \
 235                         echo "TCONFIG_EMF=y" >>$(1); \
 236                 fi; \
 237         else \
 238                 echo "# TCONFIG_EMF is not set" >>$(1); \
 239         fi; \
 240         sed -i "/TCONFIG_JFFSV1/d" $(1); \
 241         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 242                 if [ "$(JFFSv1)" = "y" ]; then \
 243                         echo "TCONFIG_JFFSV1=y" >>$(1); \
 244                 else \
 245                         echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 246                 fi; \
 247         else \
 248                 echo "TCONFIG_JFFSV1=y" >>$(1); \
 249         fi; \
 250         if [ "$(USB)" = "USB" ]; then \
 251                 sed -i "/TCONFIG_USB is not set/d" $(1); \
 252                 echo "TCONFIG_USB=y" >>$(1); \
 253                 if [ "$(USBEXTRAS)" = "y" ]; then \
 254                         sed -i "/TCONFIG_USB_EXTRAS/d" $(1); \
 255                         echo "TCONFIG_USB_EXTRAS=y" >>$(1); \
 256                 fi; \
 257                 if [ "$(NTFS)" = "y" ]; then \
 258                         sed -i "/TCONFIG_NTFS/d" $(1); \
 259                         echo "TCONFIG_NTFS=y" >>$(1); \
 260                 fi; \
 261                 if [ "$(MEDIASRV)" = "y" ]; then \
 262                         sed -i "/TCONFIG_MEDIA_SERVER/d" $(1); \
 263                         echo "TCONFIG_MEDIA_SERVER=y" >>$(1); \
 264                 fi; \
 265         else \
 266                 sed -i "/TCONFIG_USB=y/d" $(1); \
 267                 echo "# TCONFIG_USB is not set" >>$(1); \
 268         fi; \
 269         if [ "$(NO_SAMBA)" = "y" ]; then \
 270                 sed -i "/TCONFIG_SAMBASRV/d" $(1); \
 271                 echo "# TCONFIG_SAMBASRV is not set" >>$(1); \
 272         fi; \
 273         if [ "$(NO_ZEBRA)" = "y" ]; then \
 274                 sed -i "/TCONFIG_ZEBRA/d" $(1); \
 275                 echo "# TCONFIG_ZEBRA is not set" >>$(1); \
 276         fi; \
 277         if [ "$(NO_JFFS)" = "y" ]; then \
 278                 sed -i "/TCONFIG_JFFS2/d" $(1); \
 279                 echo "# TCONFIG_JFFS2 is not set" >>$(1); \
 280                 sed -i "/TCONFIG_JFFSV1/d" $(1); \
 281                 echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 282         fi; \
 283         if [ "$(NO_CIFS)" = "y" ]; then \
 284                 sed -i "/TCONFIG_CIFS/d" $(1); \
 285                 echo "# TCONFIG_CIFS is not set" >>$(1); \
 286         fi; \
 287         if [ "$(NO_SSH)" = "y" ]; then \
 288                 sed -i "/TCONFIG_SSH/d" $(1); \
 289                 echo "# TCONFIG_SSH is not set" >>$(1); \
 290         fi; \
 291         if [ "$(NO_HTTPS)" = "y" ]; then \
 292                 sed -i "/TCONFIG_HTTPS/d" $(1); \
 293                 echo "# TCONFIG_HTTPS is not set" >>$(1); \
 294         fi; \
 295         if [ "$(NO_XXTP)" = "y" ]; then \
 296                 sed -i "/TCONFIG_L2TP/d" $(1); \
 297                 echo "# TCONFIG_L2TP is not set" >>$(1); \
 298                 sed -i "/TCONFIG_PPTP/d" $(1); \
 299                 echo "# TCONFIG_PPTP is not set" >>$(1); \
 300         fi; \
 301         if [ "$(NO_LIBOPT)" = "y" ]; then \
 302                 sed -i "/TCONFIG_OPTIMIZE_SHARED_LIBS/d" $(1); \
 303                 echo "# TCONFIG_OPTIMIZE_SHARED_LIBS is not set" >>$(1); \
 304         fi; \
 305         if [ "$(EBTABLES)" = "y" ]; then \
 306                 sed -i "/TCONFIG_EBTABLES/d" $(1); \
 307                 echo "TCONFIG_EBTABLES=y" >>$(1); \
 308         fi; \
 309         if [ "$(IPV6SUPP)" = "y" ]; then \
 310                 sed -i "/TCONFIG_IPV6/d" $(1); \
 311                 echo "TCONFIG_IPV6=y" >>$(1); \
 312         fi; \
 313         if [ "$(OPENVPN)" = "y" ]; then \
 314                 sed -i "/TCONFIG_LZO/d" $(1); \
 315                 echo "TCONFIG_LZO=y" >>$(1); \
 316                 sed -i "/TCONFIG_OPENVPN/d" $(1); \
 317                 echo "TCONFIG_OPENVPN=y" >>$(1); \
 318                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 319                         sed -i "/TCONFIG_FTP_SSL/d" $(1); \
 320                         echo "TCONFIG_FTP_SSL=y" >>$(1); \
 321                 fi; \
 322         fi; \
 323         )
 324 endef
 325
 326 define BusyboxOptions
 327         @( \
 328         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 329                 sed -i "/CONFIG_FEATURE_2_4_MODULES/d" $(1); \
 330                 echo "# CONFIG_FEATURE_2_4_MODULES is not set" >>$(1); \
 331                 sed -i "/CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT/d" $(1); \
 332                 echo "CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y" >>$(1); \
 333                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 334                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 335                 sed -i "/CONFIG_MKNOD/d" $(1); \
 336                 echo "CONFIG_MKNOD=y" >>$(1); \
 337                 sed -i "/CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE/d" $(1); \
 338                 echo "CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=512" >>$(1); \
 339         fi; \
 340         if [ "$(NO_CIFS)" = "y" ]; then \
 341                 sed -i "/CONFIG_FEATURE_MOUNT_CIFS/d" $(1); \
 342                 echo "# CONFIG_FEATURE_MOUNT_CIFS is not set" >>$(1); \
 343         fi; \
 344         if [ "$(BBEXTRAS)" = "y" ]; then \
 345                 sed -i "/CONFIG_SENDMAIL/d" $(1); \
 346                 echo "CONFIG_SENDMAIL=y" >>$(1); \
 347                 sed -i "/CONFIG_FEATURE_SORT_BIG/d" $(1); \
 348                 echo "CONFIG_FEATURE_SORT_BIG=y" >>$(1); \
 349                 sed -i "/CONFIG_FTPPUT/d" $(1); \
 350                 echo "CONFIG_FTPPUT=y" >>$(1); \
 351                 sed -i "/CONFIG_FTPGET/d" $(1); \
 352                 echo "CONFIG_FTPGET=y" >>$(1); \
 353                 sed -i "/CONFIG_CLEAR/d" $(1); \
 354                 echo "CONFIG_CLEAR=y" >>$(1); \
 355                 sed -i "/CONFIG_NICE/d" $(1); \
 356                 echo "CONFIG_NICE=y" >>$(1); \
 357                 sed -i "/CONFIG_SETCONSOLE/d" $(1); \
 358                 echo "CONFIG_SETCONSOLE=y" >>$(1); \
 359         fi; \
 360         if [ "$(USB)" = "USB" ]; then \
 361                 if [ "$(USBEXTRAS)" = "y" ]; then \
 362                         sed -i "/CONFIG_E2FSCK/d" $(1); \
 363                         echo "CONFIG_E2FSCK=y" >>$(1); \
 364                         sed -i "/CONFIG_MKE2FS/d" $(1); \
 365                         echo "CONFIG_MKE2FS=y" >>$(1); \
 366                         sed -i "/CONFIG_FDISK/d" $(1); \
 367                         echo "CONFIG_FDISK=y" >>$(1); \
 368                         sed -i "/CONFIG_FEATURE_FDISK_WRITABLE/d" $(1); \
 369                         echo "CONFIG_FEATURE_FDISK_WRITABLE=y" >>$(1); \
 370                         sed -i "/CONFIG_MKFS_VFAT/d" $(1); \
 371                         echo "CONFIG_MKFS_VFAT=y" >>$(1); \
 372                         sed -i "/CONFIG_MKSWAP/d" $(1); \
 373                         echo "CONFIG_MKSWAP=y" >>$(1); \
 374                         sed -i "/CONFIG_FLOCK/d" $(1); \
 375                         echo "CONFIG_FLOCK=y" >>$(1); \
 376                         sed -i "/CONFIG_FSYNC/d" $(1); \
 377                         echo "CONFIG_FSYNC=y" >>$(1); \
 378                         sed -i "/CONFIG_UNZIP/d" $(1); \
 379                         echo "CONFIG_UNZIP=y" >>$(1); \
 380                         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 381                                 sed -i "/CONFIG_LSUSB/d" $(1); \
 382                                 echo "CONFIG_LSUSB=y" >>$(1); \
 383                                 sed -i "/CONFIG_FEATURE_WGET_STATUSBAR/d" $(1); \
 384                                 echo "CONFIG_FEATURE_WGET_STATUSBAR=y" >>$(1); \
 385                                 sed -i "/CONFIG_FEATURE_VERBOSE_USAGE/d" $(1); \
 386                                 echo "CONFIG_FEATURE_VERBOSE_USAGE=y" >>$(1); \
 387                         fi; \
 388                 fi; \
 389         else \
 390                 sed -i "/CONFIG_FEATURE_MOUNT_LOOP/d" $(1); \
 391                 echo "# CONFIG_FEATURE_MOUNT_LOOP is not set" >>$(1); \
 392                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 393                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 394                 sed -i "/CONFIG_FEATURE_MOUNT_LABEL/d" $(1); \
 395                 echo "# CONFIG_FEATURE_MOUNT_LABEL is not set" >>$(1); \
 396                 sed -i "/CONFIG_FEATURE_MOUNT_FSTAB/d" $(1); \
 397                 echo "# CONFIG_FEATURE_MOUNT_FSTAB is not set" >>$(1); \
 398                 sed -i "/CONFIG_VOLUMEID/d" $(1); \
 399                 echo "# CONFIG_VOLUMEID is not set" >>$(1); \
 400                 sed -i "/CONFIG_BLKID/d" $(1); \
 401                 echo "# CONFIG_BLKID is not set" >>$(1); \
 402                 sed -i "/CONFIG_SWAPONOFF/d" $(1); \
 403                 echo "# CONFIG_SWAPONOFF is not set" >>$(1); \
 404                 sed -i "/CONFIG_CHROOT/d" $(1); \
 405                 echo "# CONFIG_CHROOT is not set" >>$(1); \
 406                 sed -i "/CONFIG_PIVOT_ROOT/d" $(1); \
 407                 echo "# CONFIG_PIVOT_ROOT is not set" >>$(1); \
 408                 sed -i "/CONFIG_TRUE/d" $(1); \
 409                 echo "# CONFIG_TRUE is not set" >>$(1); \
 410         fi; \
 411         if [ "$(IPV6SUPP)" = "y" ]; then \
 412                 sed -i "/CONFIG_FEATURE_IPV6/d" $(1); \
 413                 echo "CONFIG_FEATURE_IPV6=y" >>$(1); \
 414                 sed -i "/CONFIG_PING6/d" $(1); \
 415                 echo "CONFIG_PING6=y" >>$(1); \
 416                 sed -i "/CONFIG_TRACEROUTE6/d" $(1); \
 417                 echo "CONFIG_TRACEROUTE6=y" >>$(1); \
 418                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 419                         sed -i "/CONFIG_FEATURE_UDHCP_RFC5969/d" $(1); \
 420                         echo "CONFIG_FEATURE_UDHCP_RFC5969=y" >>$(1); \
 421                 fi; \
 422         fi; \
 423         if [ "$(SLIM)" = "y" ]; then \
 424                 sed -i "/CONFIG_AWK/d" $(1); \
 425                 echo "# CONFIG_AWK is not set" >>$(1); \
 426                 sed -i "/CONFIG_BASENAME/d" $(1); \
 427                 echo "# CONFIG_BASENAME is not set" >>$(1); \
 428                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 429                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 430                 sed -i "/CONFIG_BLKID/d" $(1); \
 431                 echo "# CONFIG_BLKID is not set" >>$(1); \
 432                 sed -i "/CONFIG_TELNET=y/d" $(1); \
 433                 echo "# CONFIG_TELNET is not set" >>$(1); \
 434                 sed -i "/CONFIG_ARPING/d" $(1); \
 435                 echo "# CONFIG_ARPING is not set" >>$(1); \
 436                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 437                 echo "# CONFIG_FEATURE_LS_COLOR is not set" >>$(1); \
 438         else \
 439                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 440                 echo "CONFIG_FEATURE_LS_COLOR=y" >>$(1); \
 441                 sed -i "/CONFIG_FEATURE_LS_COLOR_IS_DEFAULT/d" $(1); \
 442                 echo "CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y" >>$(1); \
 443         fi; \
 444         )
 445 endef
 446
 447 define KernelConfig
 448         @( \
 449         sed -i "/CONFIG_NVRAM_SIZE/d" $(1); \
 450         echo "CONFIG_NVRAM_SIZE="$(NVRAM_SIZE) >>$(1); \
 451         sed -i "/CONFIG_CC_OPTIMIZE_FOR_SIZE/d" $(1); \
 452         if [ "$(KERN_SIZE_OPT)" = "y" ]; then \
 453                 echo "CONFIG_CC_OPTIMIZE_FOR_SIZE=y" >>$(1); \
 454         else \
 455                 echo "# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set" >>$(1); \
 456         fi; \
 457         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(MIPS32)" = "r2" ]; then \
 458                 sed -i "/CONFIG_CPU_MIPS32_R1/d" $(1); \
 459                 echo "# CONFIG_CPU_MIPS32_R1 is not set" >>$(1); \
 460                 sed -i "/CONFIG_CPU_MIPS32_R2/d" $(1); \
 461                 echo "CONFIG_CPU_MIPS32_R2=y" >>$(1); \
 462                 sed -i "/CONFIG_CPU_MIPSR1/d" $(1); \
 463                 echo "CONFIG_CPU_MIPSR2=y" >>$(1); \
 464         fi; \
 465         if [ "$(USB)" = "" ]; then \
 466                 sed -i "/CONFIG_EFI_PARTITION/d" $(1); \
 467                 echo "# CONFIG_EFI_PARTITION is not set" >>$(1); \
 468         fi; \
 469         if [ "$(IPV6SUPP)" = "y" ]; then \
 470                 sed -i "/CONFIG_IPV6 is not set/d" $(1); \
 471                 echo "CONFIG_IPV6=y" >>$(1); \
 472                 sed -i "/CONFIG_IP6_NF_IPTABLES/d" $(1); \
 473                 echo "CONFIG_IP6_NF_IPTABLES=y" >>$(1); \
 474                 sed -i "/CONFIG_IP6_NF_MATCH_RT/d" $(1); \
 475                 echo "CONFIG_IP6_NF_MATCH_RT=y" >>$(1); \
 476                 sed -i "/CONFIG_IP6_NF_FILTER/d" $(1); \
 477                 echo "CONFIG_IP6_NF_FILTER=m" >>$(1); \
 478                 sed -i "/CONFIG_IP6_NF_TARGET_LOG/d" $(1); \
 479                 echo "CONFIG_IP6_NF_TARGET_LOG=m" >>$(1); \
 480                 sed -i "/CONFIG_IP6_NF_TARGET_REJECT/d" $(1); \
 481                 echo "CONFIG_IP6_NF_TARGET_REJECT=m" >>$(1); \
 482                 sed -i "/CONFIG_IP6_NF_MANGLE/d" $(1); \
 483                 echo "CONFIG_IP6_NF_MANGLE=m" >>$(1); \
 484                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 485                         sed -i "/CONFIG_NF_CONNTRACK_IPV6/d" $(1); \
 486                         echo "CONFIG_NF_CONNTRACK_IPV6=m" >>$(1); \
 487                         sed -i "/CONFIG_NETFILTER_XT_MATCH_HL/d" $(1); \
 488                         echo "CONFIG_NETFILTER_XT_MATCH_HL=m" >>$(1); \
 489                         sed -i "/CONFIG_IPV6_ROUTER_PREF/d" $(1); \
 490                         echo "CONFIG_IPV6_ROUTER_PREF=y" >>$(1); \
 491                         sed -i "/CONFIG_IPV6_SIT/d" $(1); \
 492                         echo "CONFIG_IPV6_SIT=m" >>$(1); \
 493                         sed -i "/CONFIG_IPV6_SIT_6RD/d" $(1); \
 494                         echo "CONFIG_IPV6_SIT_6RD=y" >>$(1); \
 495                         sed -i "/CONFIG_IPV6_MULTIPLE_TABLES/d" $(1); \
 496                         echo "CONFIG_IPV6_MULTIPLE_TABLES=y" >>$(1); \
 497                         sed -i "/CONFIG_IP6_NF_RAW/d" $(1); \
 498                         echo "CONFIG_IP6_NF_RAW=m" >>$(1); \
 499                         sed -i "/CONFIG_IPV6_MROUTE/d" $(1); \
 500                         echo "CONFIG_IPV6_MROUTE=y" >>$(1); \
 501                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 502                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 503                 else \
 504                         sed -i "/CONFIG_IP6_NF_CONNTRACK/d" $(1); \
 505                         echo "CONFIG_IP6_NF_CONNTRACK=m" >>$(1); \
 506                         sed -i "/CONFIG_IP6_NF_MATCH_HL/d" $(1); \
 507                         echo "CONFIG_IP6_NF_MATCH_HL=m" >>$(1); \
 508                         sed -i "/CONFIG_IP6_NF_FTP/d" $(1); \
 509                         echo "CONFIG_IP6_NF_FTP=m" >>$(1); \
 510                         sed -i "/CONFIG_IP6_NF_MATCH_LIMIT/d" $(1); \
 511                         echo "CONFIG_IP6_NF_MATCH_LIMIT=m" >>$(1); \
 512                         sed -i "/CONFIG_IP6_NF_MATCH_CONDITION/d" $(1); \
 513                         echo "CONFIG_IP6_NF_MATCH_CONDITION=m" >>$(1); \
 514                         sed -i "/CONFIG_IP6_NF_MATCH_MAC/d" $(1); \
 515                         echo "CONFIG_IP6_NF_MATCH_MAC=m" >>$(1); \
 516                         sed -i "/CONFIG_IP6_NF_MATCH_MULTIPORT/d" $(1); \
 517                         echo "CONFIG_IP6_NF_MATCH_MULTIPORT=m" >>$(1); \
 518                         sed -i "/CONFIG_IP6_NF_MATCH_MARK/d" $(1); \
 519                         echo "CONFIG_IP6_NF_MATCH_MARK=m" >>$(1); \
 520                         sed -i "/CONFIG_IP6_NF_MATCH_LENGTH/d" $(1); \
 521                         echo "CONFIG_IP6_NF_MATCH_LENGTH=m" >>$(1); \
 522                         sed -i "/CONFIG_IP6_NF_MATCH_STATE/d" $(1); \
 523                         echo "CONFIG_IP6_NF_MATCH_STATE=m" >>$(1); \
 524                         sed -i "/CONFIG_IP6_NF_TARGET_MARK/d" $(1); \
 525                         echo "CONFIG_IP6_NF_TARGET_MARK=m" >>$(1); \
 526                         sed -i "/CONFIG_IP6_NF_TARGET_TCPMSS/d" $(1); \
 527                         echo "CONFIG_IP6_NF_TARGET_TCPMSS=m" >>$(1); \
 528                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 529                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 530                 fi; \
 531         fi; \
 532         sed -i "/CONFIG_BCM57XX/d" $(1); \
 533         if [ "$(BCM57)" = "y" ]; then \
 534                 echo "CONFIG_BCM57XX=m" >>$(1); \
 535         else \
 536                 echo "# CONFIG_BCM57XX is not set" >>$(1); \
 537         fi; \
 538         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(EBTABLES)" = "y" ]; then \
 539                 sed -i "/CONFIG_BRIDGE_NF_EBTABLES/d" $(1); \
 540                 echo "CONFIG_BRIDGE_NF_EBTABLES=m" >>$(1); \
 541                 if [ "$(IPV6SUPP)" = "y" ]; then \
 542                         sed -i "/CONFIG_BRIDGE_EBT_IP6/d" $(1); \
 543                         echo "CONFIG_BRIDGE_EBT_IP6=m" >>$(1); \
 544                 fi; \
 545         fi; \
 546         )
 547 endef
 548
 549
 550 bin:
 551 ifeq ($(B),)
 552         @echo $@" is not a valid target!"
 553         @false
 554 endif
 555         @cp router/config_base router/config_$(lowercase_B)
 556         @cp router/busybox/config_base router/busybox/config_$(lowercase_B)
 557         @cp $(LINUXDIR)/config_base $(LINUXDIR)/config_$(lowercase_B)
 558
 559         $(call RouterOptions, router/config_$(lowercase_B))
 560         $(call KernelConfig, $(LINUXDIR)/config_$(lowercase_B))
 561         $(call BusyboxOptions, router/busybox/config_$(lowercase_B))
 562
 563         @$(MAKE) setprofile N=$(TPROFILE) B=$(B) DESC="$(BUILD_DESC)" USB="$(USB)"
 564         @$(MAKE) all
 565
 566 ## Make the "normal" build
 567 a:
 568         @$(MAKE) bin B=A BUILD_DESC="Std" USB="USB"
 569
 570 ## Make the "normal but without SSH" build
 571 b:
 572         @$(MAKE) bin NO_SSH=y B=B BUILD_DESC="No SSH" USB="USB"
 573
 574 ## Make the "normal but without CIFS" build
 575 c:
 576         @$(MAKE) bin NO_CIFS=y B=C BUILD_DESC="No CIFS" USB="USB"
 577
 578 ## Make the "normal but without SAMBA" (Lite) build
 579 d:
 580 ifeq ($(CONFIG_LINUX26),y)
 581         @$(MAKE) bin NO_SAMBA=y SLIM=y NO_CIFS=y NO_JFFS=y NO_ZEBRA=y B=D BUILD_DESC="Lite" USB="USB"
 582 else
 583         @$(MAKE) bin NO_SAMBA=y SLIM=y B=D BUILD_DESC="Lite" USB="USB"
 584 endif
 585
 586 ## Make the "normal (with NTFS support) + VPN" build
 587 e:
 588 ifeq ($(CONFIG_LINUX26),y)
 589         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="$(VPN)" USB="USB"
 590 else
 591         @$(MAKE) bin OPENVPN=y NTFS=y B=E BUILD_DESC="$(VPN)" USB="USB"
 592 endif
 593
 594 ## Make the "normal with Extras and NTFS" build
 595 m:
 596 ifeq ($(CONFIG_LINUX26),y)
 597         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Ext" USB="USB"
 598 else
 599         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Ext" USB="USB"
 600 endif
 601
 602 ## Make the "No USB" build
 603 s:
 604 ifeq ($(CONFIG_LINUX26),y)
 605         @$(MAKE) bin JFFSv1=y $(if $(filter r2, $(MIPS32)),,BCM57=y) B=S BUILD_DESC="Std" USB=""
 606 else
 607         @$(MAKE) bin BBEXTRAS=y BCM57=y B=S BUILD_DESC="Std" USB=""
 608 endif
 609
 610 ## Make the "Mini: no USB, no CIFS, no Zebra" build - targeted for Netgear routers
 611 f:
 612         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_ZEBRA=y SLIM=y B=F BUILD_DESC="Mini" USB=""
 613
 614 ifeq ($(CONFIG_LINUX26),y)
 615 ## Make the "No USB with IPv6, no Zebra" build - for 4MB routers
 616 i:
 617         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_ZEBRA=y IPV6SUPP=y B=I BUILD_DESC="MiniIPv6" USB=""
 618 endif
 619
 620 ## Make the "VPN witn no USB support" build
 621 v:
 622 ifeq ($(CONFIG_LINUX26),y)
 623         @$(MAKE) bin OPENVPN=y NO_JFFS=y B=V BUILD_DESC="$(VPN)" USB=""
 624 else
 625         @$(MAKE) bin OPENVPN=y BBEXTRAS=y BCM57=y B=V BUILD_DESC="$(VPN)" USB=""
 626 endif
 627
 628 ## Make Mips32r2 builds
 629 r2m:
 630         @$(MAKE) m MIPS32=r2
 631
 632 r2e:
 633         @$(MAKE) e MIPS32=r2
 634
 635 r2s:
 636         @$(MAKE) s MIPS32=r2
 637
 638 r2v:
 639         @$(MAKE) v MIPS32=r2
 640
 641 r2i:
 642         @$(MAKE) i MIPS32=r2
 643
 644 r2f:
 645         @$(MAKE) f MIPS32=r2
 646
 647 r2d:
 648         @$(MAKE) d MIPS32=r2
 649
 650 e3000:
 651         @$(MAKE) r2m ND=E3000 NVRAM_SIZE=60
 652
 653 e3000v:
 654         @$(MAKE) r2e ND=E3000 NVRAM_SIZE=60
 655
 656 e2000:
 657         @$(MAKE) bin MIPS32=r2 B=S USB="" ND=E2000 NVRAM_SIZE=60 BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y BUILD_DESC="Std"
 658
 659 e2000v:
 660         @$(MAKE) bin MIPS32=r2 B=V USB="" ND=E2000 NVRAM_SIZE=60 BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y OPENVPN=y BUILD_DESC="$(VPN)"
 661
 662 setprofile:
 663         echo '#ifndef TOMATO_PROFILE' > router/shared/tomato_profile.h
 664         echo '#define TOMATO_$(N) 1' >> router/shared/tomato_profile.h
 665         echo '#define PROFILE_G 1' >> router/shared/tomato_profile.h
 666         echo '#define PROFILE_N 2' >> router/shared/tomato_profile.h
 667         echo '#define TOMATO_PROFILE PROFILE_$(N)' >> router/shared/tomato_profile.h
 668         echo '#define TOMATO_PROFILE_NAME "$(N)"' >> router/shared/tomato_profile.h
 669         echo '#define TOMATO_BUILD_NAME "$(B)"' >> router/shared/tomato_profile.h
 670         echo '#define TOMATO_BUILD_DESC "$(DESC)"' >> router/shared/tomato_profile.h
 671         echo '#ifndef CONFIG_NVRAM_SIZE' >> router/shared/tomato_profile.h
 672         echo '#define CONFIG_NVRAM_SIZE $(NVRAM_SIZE)' >> router/shared/tomato_profile.h
 673         echo '#endif' >> router/shared/tomato_profile.h
 674         echo '#endif' >> router/shared/tomato_profile.h
 675
 676         echo 'TOMATO_$(N) = 1' > tomato_profile.mak
 677         echo 'PROFILE_G = 1' >> tomato_profile.mak
 678         echo 'PROFILE_N = 2' >> tomato_profile.mak
 679         echo 'TOMATO_PROFILE = $$(PROFILE_$(N))' >> tomato_profile.mak
 680         echo 'TOMATO_PROFILE_NAME = "$(N)"' >> tomato_profile.mak
 681         echo 'TOMATO_BUILD = "$(B)"' >> tomato_profile.mak
 682         echo 'TOMATO_BUILD_NAME = "$(B)"' >> tomato_profile.mak
 683         echo 'TOMATO_BUILD_DESC = "$(DESC)"' >> tomato_profile.mak
 684         echo 'TOMATO_PROFILE_L = $(lowercase_N)' >> tomato_profile.mak
 685         echo 'TOMATO_PROFILE_U = $(uppercase_N)' >> tomato_profile.mak
 686         echo 'TOMATO_BUILD_USB = "$(USB)"' >> tomato_profile.mak
 687
 688         echo 'export EXTRACFLAGS := $(EXTRA_CFLAGS) -DBCMWPA2 -funit-at-a-time -Wno-pointer-sign -mtune=mips32 -mips32 $(if $(filter $(NVRAM_SIZE),0),,-DCONFIG_NVRAM_SIZE=$(NVRAM_SIZE))' >> tomato_profile.mak
 689
 690 # Note that changes to variables in tomato_profile.mak don't
 691 # get propogated to this invocation of make!
 692         @echo ""
 693         @echo "Using $(N) profile, $(B) build config."
 694         @echo ""
 695
 696         @cd $(LINUXDIR) ; \
 697                 rm -f config_current ; \
 698                 ln -s config_$(lowercase_B) config_current ; \
 699                 cp -f config_current .config
 700
 701         @cd router/busybox && \
 702                 rm -f config_current ; \
 703                 ln -s config_$(lowercase_B) config_current ; \
 704                 cp config_current .config
 705
 706         @cd router ; \
 707                 rm -f config_current ; \
 708                 ln -s config_$(lowercase_B) config_current ; \
 709                 cp config_current .config
 710
 711         @$(MAKE) -C router oldconfig
 712
 713 help:
 714         @echo "a            A build (standard)"
 715         @echo "b            B build (standard minus SSH)"
 716         @echo "c            C build (standard minus CIFS)"
 717         @echo "d            D build (standard minus Samba server)"
 718         @echo "m            M build (standard plus extra utilities and NTFS support)"
 719 ifeq ($(CONFIG_LINUX26),y)
 720         @echo "e            E build (standard plus VPN, extra utilities and NTFS support)"
 721         @echo "i            I build (IPv6 with no USB support minus CIFS and RIPv1/2)"
 722 else
 723         @echo "e            E build (standard plus VPN and NTFS support)"
 724 endif
 725         @echo "s            S build (no USB support)"
 726         @echo "f            F build (no USB support minus CIFS and RIPv1/2)"
 727         @echo "v            V build (VPN with no USB support)"
 728 ifeq ($(CONFIG_LINUX26),y)
 729         @echo "r2m          MIPS Release 2 M build (standard plus extras)"
 730         @echo "r2e          MIPS Release 2 E build (standard plus VPN and extras)"
 731         @echo "r2v          MIPS Release 2 V build (VPN with no USB support)"
 732         @echo "r2s          MIPS Release 2 S build (no USB support)"
 733         @echo "r2i          MIPS Release 2 I build (IPv6 with no USB support minus CIFS and RIPv1/2)"
 734         @echo "r2f          MIPS Release 2 F build (no USB support minus CIFS and RIPv1/2)"
 735         @echo "e3000        Linksys E3000 build (standard plus extras)"
 736         @echo "e3000v       Linksys E3000 build (standard plus VPN and extras)"
 737         @echo "e2000        Linksys E2000 build (no USB support)"
 738         @echo "e2000v       Linksys E2000 build (VPN with no USB support)"
 739 endif
 740         @echo "..etc..      other build configs"
 741         @echo "clean        -C router clean"
 742         @echo "cleanimage   rm -rf image"
 743         @echo "cleantools   clean btools, mksquashfs"
 744         @echo "cleankernel  -C Linux distclean (but preserves .config)"
 745         @echo "distclean    distclean of Linux & busybox (but preserve .configs)"
 746         @echo "prepk        -C Linux oldconfig dep"
 747
 748 .PHONY: all clean distclean cleanimage cleantools cleankernel prepk what setprofile help
 749 .PHONY: a b c d m Makefile allversions tomato_profile.mak