remove "No Limit" from rate/limit selection

[tomato.git] / CHANGELOG

Tomato USB Mod (ND version)
===========================

build 01 - 12/17/2008
---------------------

Based on the official Tomato 1.23 ND.

Added support for USB 1.1 (OHCI and UHCI) and USB 2.0.

USB support is configurable via Tomato GUI.

USB storage (Ext2, Ext3 and FAT file systems) and USB printing support.

Non-spooling printer server (p910nd 0.92) is included and started
automatically if you enable printing support. Bidirectional copying can
be disabled via GUI if it causes problems with your printer.

Fixed slow running clock problem on Asus WL-520GU. After flashing this
firmware you have to reboot the router at least once for clock to get
fixed.

UPnP is disabled by default.

Added CGI support to HTTP daemon - you can place your cgi scripts into
"/www/ext/cgi-bin" folder, and they will be executed when you access them
via http://<router_ip>/ext/cgi-bin/my_script_name.


build 02 - 12/20/2008
---------------------

Allowed changing USB settings without rebooting a router.

Fixed non-working AIR (WLAN) LED on Asus WL-520GU.

USB support code clean-up.


build 03 - 12/22/2008
---------------------

Cosmetic changes only.


build 04 - 12/26/2008
---------------------

Added FTP server daemon (vsftpd 2.0.7) configurable via GUI.

Updated kernel printer driver to version 0.13 and included some fixes
to the printer driver made by Asus.


build 05 - 12/31/2008 and 07 - 01/03/2009 (UNSTABLE)
------------------------------------------------------

Attempt to update Broadcom Wireless and Ethernet Controller driver to the
version 4.150.10.X (original Tomato included driver is version 4.130.19.0).

Added new setting to "QoS -> Basic Settings" page to select Qdisc
Scheduler (sfq | pfifo).

Auto-mounting for USB storage drives. When this feature is activated, and
USB drive is plugged in, all mountable partitions will be automatically
mounted to a new directories under /mnt. If you want to override default
mount points, mount your partition manually in the satrtup script, i.e.:
"mount -o noatime /dev/discs/disc0/part1 /opt".
If you mount your partition manually, it will not be re-mounted to a
default mount point.

This build, as well as builds 06 and 07 had several issues: using Wireless
Survey and/or changing some settings could crash the router or cause it
to hang.


build 08 - 01/07/2009
---------------------

Since both previous versions with updated WL driver were unstable, rolled
back Broadcom Wireless Controller driver to the old version 4.130.19.0
(original Tomato ND version).

Fixed several bugs introduced in the previous releases.


build 09 - 01/09/2009
---------------------

Added Network File Sharing - Samba 2.0.10.

Added USB Hotplug script - useful for configuring attached USB devices,
i.e. loading firmware into HP1018/1020 or similar printer.

Updated USB drivers to the newer version from kernel 2.4.35/37, applied
some patches to stabilize USB.

Applied patch to allow using routers with up to 128 MB RAM.


build 11 - 01/16/2009
---------------------

Upgraded Broadcom Wireless driver to version 4.150.10.5.

Included SpeedMod by Rodney Chua.

Added functionality to the GUI to unmount (safely remove) USB drives,
reworked the display of attached usb devices.

Fixed "Kernel BUG" error when transfering files to shared USB drives
using Samba.

Added "Regulatory Mode" setting (off|g|h) to "Advanced -> Wireless"
page. This solves long-standing Tomato connectivity problems for Intel
Centrino (2200bg etc) wireless cards.

Allowed up to 100 applications in UPnP.


build 12 - 01/25/2009
---------------------

Bug fixes: cosmetic fixes for GUI, using "Measure Noise Floor" function
on the Device List page should no longer disable wireless.

Improved support for Ext2/Ext3 filesystems (allow expanded inodes,
forward compatibility).

Replaced UPnP daemon with MiniUPnPd.

Restored the gpio utility temporarily removed from previous build.


build 14 - 01/27/2009
---------------------

Minor improvements for FAT filesystem support.

Improved SpeedMod implementation.


build 15 - 01/29/2009
---------------------

Bug fix: corrected firewall rules when WAN access is enabled for FTP.


build 16 - 01/31/2009
---------------------

Fixed error connecting to the FTP server when directory listings are
disabled.

Added support for mounting loopback devices. The loop device module loop.o
is not included but available separately, and can be loaded with insmod
command.

Added option to automatically share all mounted USB partitions.


build 17 - 02/04/2009
---------------------

Patch to resolve read errors on spin-up with some auto spin-down USB
drives (not tested).

Miniupnpd daemon updated to the latest version 20090129. Fixed UPnP
presentation URL when non-standard http port is used.

Fixed LEDs/buttons/GPIO bug introduced with WL driver update (only
affected some router models).

Code clean up, cosmetics.


build 18 - 02/05/2009
---------------------

Removed excessive stripping of shared libraries (fixes problem introduced
in build 17 when using IPP2P in QoS rules).

Added limited kernel-level support for national codepages needed by Samba.


build 19 - 02/10/2009
---------------------

Restored original Tomato setting to show/hide UPnP server in "My Network
Places".

Added scsi-stop command to spin down some USB drives (find a description
at http://wl500g.info/showpost.php?p=47135&postcount=10).

Added GUI settings to require authentication to access Samba shares.

Upgraded Broadcom Wireless driver to version 4.158.4.0.

p910nd printer server is updated to the latest ver. 0.93.


build 20 - 02/24/2009
---------------------

Updated MiniUPnPd to the latest ver. 20090214 and recompiled it with
support for GENA UPnP events enabled.

Updated FTP Server vsftpd to the latest ver. 2.1.0.

Removed non-working ipkg.

Fixed "Unknown Host" Samba error when router is working in Wireless
Bridge or Wireless Client mode.

Fixed SES button and WLAN LED on Asus WL-500gPv1 and Buffalo WBR2-G54
routers.

Mounted USB drives no longer unmount when changing network settings
causes router to restart all services.

Added support for mounting USB partitions by label, i.e.
"mount LABEL=optware /opt -o noatime,nodiratime"
Changed the default mount point for labeled disks from
"/mnt/disk#_part#" to "/mnt/LABEL".

Added support for automounting using /etc/fstab file if it exists
(see http://en.wikipedia.org/wiki/Fstab). Support for labels and UUIDs
in fstab is included. If automounting is disabled, you can still mount
your drives using fstab information by issuing "mount -a" command.
You can create and populate /etc/fstab file in Init script.

Added "nvram setfile2nvram <filename>" command to save small files in
nvram. They will be automatically restored on startup. This is another
way to create, for example, /etc/fstab file, and to make it "permanent".

Changed the on-flash filesystem from JFFS2 to JFFS 1.1 with special
modifications to the JFFS driver so that it would work on a very small
filesystem. Now JFFS partition can be mounted with as little as 192KB
available.

Updated SCSI Disk Driver to the newer version from kernel 2.4.37.
This fixes a memory leak, improves compatibility with certain devices,
and eliminates some error messages from the log (i.e. when connecting
Kingston flash drives).

Added support for multi-LUN USB storage devices (like card readers).

Applied SCSI subsystem patch from kernel 2.4.37 to improve USB
hotplugging.

Multiple improvements for USB hotplugging to make it more robust.

Starting from this build, the mod comes in 4 different flavours:
- Standard: all standard USB and NAS features included; 120KB
  JFFS space (2 blocks) available on 4MB flash routers;
- Lite: all features of Standard but no Samba; some very minor features
  are stripped out of Busybox, about 420KB JFFS space (7 blocks)
  available on 4MB flash routers;
- No CIFS: all features of Standard but no CIFS Network filesystem
  support, about 180KB JFFS space (3 blocks) available on 4MB flash
  routers;
- Extras: all features of Standard plus Linux Ext2/Ext3 filesystem
  utilities (fdisk, e2fsck, mke2fs, mkswap), and built-in loop device
  support, no JFFS space available on 4MB flash. This version is for
  people who don't need JFFS space or have 8MB flash routers, and would
  like to be able to partition/format drives in Linux native Ext2/Ext3
  format directly on the router without installing any additional tools.


build 21 - 03/03/2009
---------------------

Fixed problem introduced in build 20 with some USB 1.1 printers not
working when connected via USB 2.0 hub.

Added support for Kyocera Mita FS 820, Brother HL-1440 and Epson M-129C
printers.

Fixed DDNS updates scheduling.

Added Hostname validation to the Web UI.

Fixed writing the hosts file when Hostname is changed in the Web UI.

Fixed potential infinite lock in USB hotplugging.

Included additional "USB Red" (from Absolon) and "USB Blue" Color Schemes
into the "Extras" build.


build 22 - 03/13/2009
---------------------

More improvments to USB hotplugging code.

Cosmetic syslog fix to avoid splitting log messages.

Increased amount of available JFFS space by ~60KB in Standard, Lite and
No-CIFS builds.


build 23 - 03/24/2009
---------------------

Display additional info in the GUI for attached USB devices: always show
filesystem even for unmounted drives, show size for mounted partitions,
fix for displaying multiple printers.

Allowed using domain name in admin access restriction.

Fixed DST rules for some Russian timezones.

Added Country/Region setting to "Advanced Wireless" page.

Bug fixes, code optimization and cleanup.


build 24 - 04/05/2009
---------------------

Internal improvements and minor bug fixes.

Support for newer optional NTFS filesystem driver (available separately).

Added mkdosfs to "Extras" build to format FAT32 partitions.

Fix for Samba shares mounted by other Linux systems using CIFS.

Updated USB kernel driver.

Added ntpc modifications by ringer004.


build 25 - 05/01/2009
---------------------

New version 1.3 of the JFFS filesystem (by ray123) that reserves only
1 block of flash memory for overhead. JFFS bug fixes. Now even "Extras"
build has 64KB of JFFS space available on 4MB flash.

Updated MiniUPnPd to the latest version 1.3 (20090417).

Added wireless auto channel selection.

Changed to use passive mode for wireless scan (generally should pick up
more APs).

USB kernel driver fixes.

Cosmetics.


build 27 - 05/25/2009
---------------------

Merged with official Tomato 1.24 update.

Updated MiniUPnPd to the latest version 20090516.


build 28 - 05/28/2009
---------------------

Merged with official Tomato 1.25 update.

Busybox updated to ver. 1.14.1.

FTP Server vsftpd updated to ver. 2.1.1.


build 31 - 06/05/2009
---------------------

MiniUPnPd updated to the latest ver. 20090605.

FTP Server vsftpd updated to ver. 2.1.2.

Layer-7 filter patterns updated to the latest 2009-05-28.

Busybox "insmod" bug fix.

Minor bug fixes and cosmetics.


build 32 - 06/13/2009
---------------------

Updated dnsmasq to the latest ver. 2.49.

Replaced ramfs by tmpfs.

Added optional access restrictions for FTP WAN access - source IP filter,
and limiting connection attempts.

Cosmetics.


build 33 - 06/29/2009
---------------------

Added support for QUERY_STRING env variable to httpd.

Busybox updated to ver. 1.14.2.

Minor fix for printing support broken in build 31 for some printer models.


build 34 - 08/12/2009
---------------------

Fixed USB automount not working on startup when WAN mode is set to Static or
Disabled.

Minor fixes backported from kernel 2.4.37.5.

USB driver patched to make hdparm work properly with USB drives.

FTP Server vsftpd updated to ver. 2.2.0.

Allow multiple MAC addresses per device for static leases (copied over
from Tomato VPN mod).

Use more precise pattern for L7 FTP match.

Added new Web GUI page to execute system shell commands.

Added "Bluetooth Coexistence" mode to the Advanced Wireless settings (might
be useful with UMA enabled phones).

Automatically create empty /etc/fstab file on startup.

Busybox updated to ver. 1.14.3.

Fixed CSS for Absolon USB themes ("USB Red" and "USB Blue").


build 35 - 10/07/2009
---------------------

Linux Kernel is updated to the latest in 2.4.x series version 2.4.37.6.

Updated Toolchain: binutils 2.19.1, gcc 3.4.6, uClibc 0.9.29.

Automount/unmount improvements: support for .autorun and autostop scripts,
deactivate swap on unmount, unmount all mountpoints when requested from the
web GUI.

Added "Unmount all USB Drives" button action to "Administation -> Buttons".

Included FUSE 2.5.3 kernel driver.
This allows installing and using Optware ntfs-3g package to mount writable
NTFS partitions. If Optware ntfs-3g is installed, automount and autoshare
features will work for NTFS-formatted partitions.

MiniUPnPd updated to the latest ver. 20090921, and compiled with enabled
GENA UPnP events support (was disabled in build 27).

SpeedMod patches updated to the latest version 118 (replaced Jenkins'
lookup3 hash with MurmurHash 2.0).

CIFS is updated to version 1.49 backported from kernel 2.6: many bug fixes,
performance improvements, and security options to allow mounting NTLMv2
and LANMAN (might be required to mount some NAS disks) shares.

Proper detection of D-Link DIR-320 router.

Updated IMQ driver to set netfilter hooking behaviour from module
parameter (http://wiki.nix.hu/cgi-bin/twiki/view/IMQ/ImqDevelImqBehaviour).

Busybox updated to ver. 1.14.4, with additional patches from 1.15 trunk,
compiled with dirname applet, and with support for tainted module checking
(required to insmod some extra kernel modules).

Dnsmasq is updated to ver. 2.50, enabled TFTP server in Dnsmasq (activate
via "Dnsmasq Custom Configuration").

Added /proc/sys/net/ipv4/ip_conntrack_count.

Solved potential concurrency issues starting samba/ftp introduced in the
previous build.

Iptables updated to ver. 1.3.8: added "random" option to DNAT, SNAT,
MASQUERADE and REDIRECT; UDPLITE multiport support; bug fixes and cosmetics.

Various fixes: OpenSSL security patch (CVE-2008-5077), fixes for Broadcom
wireless driver, a few USB driver fixes backported from 2.6.x kernel tree,
other minor fixes.

Fixed incorrect subnet mask written to MiniUPnPd configuration file.

Broadcom wireless driver downgraded to version 4.150.10.29 to solve issues
with some Asus wl500gPv2 routers.

Display swap partitions status in the GUI, show labels for NTFS partitions.

Optware perl, if installed, should now be able to execute perl scripts
without any changes.

Old Linksys igmprt binary replaced by open source igmpproxy application.

Cosmetics and code clean-up.


build 36 - 10/18/2009
---------------------

Fixed setting TCP and UDP timeout values on "Advanced -> Conntrack/Netfilter"
page, removed obsolete timeouts, added Generic and ICMP timeouts.

Fixed incorrect detection of JFFS partition size.

Do not start igmpproxy when WAN is disabled, allow alternative config file
for igmpproxy.

Full NTFS support via ntfs-3g is included in "Extras" build.

SpeedMod rolled back to using lookup3 hash which seems to be actually faster
than MurmurHash2.

Minor USB driver fixes from 2.6 kernel tree.

MiniUPnPd updated to ver. 20091010.

Dnsmasq updated to ver. 2.51.

Other minor fixes, cosmetics, code optimization and clean-up.

Created non-USB build.


build 37 - 10/25/2009
---------------------

Fixed DDNS updates not working since build 35 when using secure SSL
connection.

Fixed some wirelesss connectivity issues for "Wireless Client" and
"Wireless Bridge" modes.

FTP Server vsftpd updated to ver. 2.2.1.


build 38 - 11/07/2009
---------------------

Fixed execution of .autostart and after-mount scripts.

Fixes for wireless configuration utility (should resolve some of the
wireless connectivity issues).

Fixed "service net restart" to bring up wireless.

Fixed remounting of all USB partitions upon services restarts (i.e. when
some settings are saved in the GUI).

Samba compatibility fix (disable sanity check).

Busybox: added blkid applet, added "label" option to mkswap, replaced
mkdosfs by Busybox applet.

Added "Master Browser" and "WINS Server" configuration settings (both are
turned on by default).

Linux kernel 2.4.37.7.

MiniUPnPd updated to version 1.4 (20091106).

Optimization to reduce size, minor bug fixes, cosmetics.


build 39 - 11/19/2009
---------------------

Fixed incompatibility problem with BCM4704 chipset (WL-500W, WL-500gPv1,
WRTSL54GS etc) introduced in previous build by kernel 2.4.37.7 update.

Resolved wireless connectivity issues with iPhone/iPodTouch devices.

p910nd printer server: reduced logging in case of disconnected printer.

Busybox: minor fixes from trunk.

Fixed: Samba could start with incorrect configuration upon services
restarts (i.e. when some settings are saved in the GUI).

Remount busy partitions as read-only on system shutdown if unmount is not
possible.

Security fix (MatrixSSL patched to disable re-negotiation for server side
SSL) for Tomato web server running in HTTPS mode.

FTP Server vsftpd updated to ver. 2.2.2.

ntfs-3g in Extras build is updated to ver. 2009.11.14.

Optimization to reduce size (compressed kernel to free up to 120-180K of
additional space available for JFFS), cosmetics.


build 40 - 11/29/2009
---------------------

Merged with official Tomato 1.27 update.

Added ID for Asus WL-500W.

Cosmetics and minor fixes.


build 41 - 12/01/2009
---------------------

Fixed some USB printers not being recognized.

Added "wl_disable_wpa_supp" nvram variable to resolve some issues with
Wireless Ethernet Bridge mode.


build 42 - 01/07/2010
---------------------

USB kernel fixes, USB hotplug code clean-up and optimization, got rid of
the USB hotplug locks (patches by ray123).

Basic Wireless N mode support: single band only (2.4GHz), the only currently
supported models witn N capability are WL-500W, and RT-N16 (with a special
build).

Improved support for wireless client modes (wireless ethernet bridge and
wireless client) to automatically restore lost connection.

Do not restart Samba/vsftpd on USB drives disconnect if disconnected
drive doesn't have any mounted partitions.

Proper support for buttons and leds on D-Link DIR-320 and Asus WL-500GPv2.

Busybox fixes from trunk: ash, tar, awk, crond, grep, mount, wget.

MiniUPnPd updated to version 1.4 (20091222).

Minor fixes and code clean-up.

Separate (EXPERIMENTAL) version (beta 02) for Asus RT-N16 based on kernel
2.6.22 (N-mode support, included SIP conntrack module, added extra Samba
Asian codepages).


build 43 - 02/15/2010
---------------------

Fixed: restoring files on start-up previously saved to nvram using
setfile2nvram command (broken in build 42).

Fixed: copying large files to FAT-formatted disks via Samba.

Fixed: display file names containing national characters in Samba FAT
shares (broken in build 42).

Fixed: auto-reconnect for wireless client modes (wet, sta).

Enabled WPA2 security for all modes, including WDS, wireless client and
wireless ethernet bridge.

Replace spaces and special characters by underscores in mountpoint names
when auto-mounting by label.

Allow enough time during shutdown to properly unmount (or remount as
read-only) usb drives.

Added an extra route in case the default gateway is over the bridge.

Increased limits for number of entries allowed for wireless filter, static
DHCP and access restrictions.

WME is set to "Auto" by default. For N-mode support, make sure it's set
to "On" or "Auto".

Applied kernel patches from linux-mips.org (up to 2009-12-05).

Software updates: Linux kernel 2.4.37.9, ntfs-3g (in Extras builds)
2010.1.16, Dnsmasq 2.52, bridge-utils 1.0.6, pptp-client 1.7.1.

Busybox: minor fixes from trunk.

Upgraded toolchain to use gcc 4.1.2 for userspace applications (gcc 3.4.6
is still used to compile kernel).

VPN build is merged with the latest VPN mod vpn3.6 (based on OpenVPN 2.1.1).

Cosmetics.


build 44 - 02/17/2010
---------------------

Hotfix: missing kernel symbol preventing ext2/ext3 modules from being loaded.


* Kernel 2.6-based builds (beta 05):

Support for Asus RT-N12, Netgear WNR3500L. Added MIPS R1 CPU builds
compatible with other routers capable of running Tomato ND (tested only
on Linksys WRT54G-TM, Asus WL-520GU, Asus WL-500GPv2).

Samba upgraded to version 3 (3.0.24 with patches from newer versions).

Fixed: bug in Access Restrictions and QoS rules preventing using rules
based on MAC addresses.

Fixed: bug in triggered port forward.

Fixed: setting max connections on "Conntrack/Netfilter" GUI page.

Configurable conntrack hashtable size.

Preliminary Jumbo frame support for routers with gigabit switch (not
working yet, only GUI setting is present).

Backported many fixes and improvements from newer kernel 2.6.x versions.

The USB kernel driver is updated to the version from kernel 2.6.24 with
additional fixes backported from newer versions.



build 45 - 04/03/2010
---------------------

Improved stability of wireless link when using router in wireless client
or wireless ethernet bridge modes.

Automatically load network routing table supplied via DHCP from ISP with
GUI setting to disable it if desired (enabled by default).

Replaced vconfig application with Busybox applet.

Fixed WLAN led for Asus WL500GPv2.

Use kernel driver (in both - 2.4 and 2.6 - based builds) for PPTP and L2TP
connections to improve speed and reduce CPU load, replaced pptp-client
with accel-pptp pppd plugin ver. 0.8.4.

Allowed to specify server for PPTP and L2TP connections as either IP address
(as before), or domain name.

Allowed PPTP connections with dynamic IP addresses ("Use DHCP" GUI setting).

Fixed regression introduced in build 44 causing constant reconnects for some
PPPoE connections.

Added display of current wireless link rates to the "Status->Overview" and
"Status->Device List" pages.

Display N-capability of AP in Wireless Survey results.

Country selection on Advanced->Wireless page changed to obtain the list of
available countries from the wireless driver.

Fixed USB auto-share to only share actually mounted partitions, and not any
other directory under /mnt.

Bind HTTP daemon to LAN interface only instead of 0.0.0.0 to simplify
binding of other applications (like pixelserv) to an alternate LAN IP.

Force hard reset if reboot hangs for longer then 10 secs.

Execute .autorun scripts located in /jffs when mounting JFFS partition.

Fixed Bandwidth history loading when it's trying to load a corrupted remote
file.

Busybox: patches from trunk for awk, unzip, wget, modprobe, syslog, fdisk,
ping, top, wc, ash, tail, vi. Added flock applet to the Extras build.

Software updates: ntfs-3g (in Extras build) 2010.3.6, MiniUPnPd 1.4 20100308,
pppd (used by PPTP and L2TP connection) 2.4.5, GNU Zebra 0.95.

Minor fixes and cosmetics.


* Kernel 2.4-based builds only:

Fixed memory leak in "recent" iptables match.

Fixed flood of zombie cifsd processes in case of CIFS connection problems.


* Kernel 2.6-based builds (changes from beta05 to beta07):

Various fixes backported from kernel 2.6 tree to improve stability and
reduce memory allocation errors.

Fixed bug writing random values into Ethernet controller registers at
startup.

Fixed USB support for BCM5354 chipset (Asus WL500GPv2, WL520GU,
D-Link DIR-320).

Fixed USB support for Netgear WNR3500L.

Fixed SSL certificates being rewritten on every reboot.

Added support for additional devices to USB option driver.

Fixed memory leak in USB hotplugging code.

Fixed bug preventing Scheduled Access restriction to be turned off.

Fixed setting conntrack hash table size via GUI.


* Kernel 2.6-based builds (changes from beta07 to beta10):

Added support for Linksys WRT160Nv3 router.

Adjustments to correct LEDs behavior on Netgear WNR3500L.

Fixed support for large files (4GB+) in Samba 3.

Tune up the default Samba 3 configuration (can be overriden by specifying
"socket options" settings in the "Samba Custom Configuration" box).

Fixed support for non-standard block sizes (!= 4KB), and the max file
size calculation for Ext2 and Ext3 file systems (backports from kernel
2.6 tree).

Optimized OpenVPN build to utilize kernel epoll support (VPN builds).

Fixed VPN server/client "Stop Now"/"Start Now" button not working, and/or
zombie vpnserver/vpnclient processes left when using this button (VPN
builds).

Backports from kernel 2.6 tree to optimize and speed up memory allocator
and network routing, and to improve overall stability. Enabled page
allocation fallback.

Fixed IMQ driver causing network slow-downs and freezes when loaded,
allowed to specify IMQ hooking behavior via module parameters.

Support for additional USB modems and bug fixes in USB option driver.

Fixed GRE/PPTP conntrack helper being broken preventing clients to
connect to remote PPTP servers.

Fixed USB Setup GUI page being inaccessible when some USB storage devices
are connected to the router.

Bug fixes in kernel Netfilter modules: connlimit, recent, u32 and time
matches, TCPMSS target, added hashlimit match.

Software updates: usb_modeswitch ver. 1.1.1.


build 45-beta11 (kernel 2.6-based only) - 04/27/2010
----------------------------------------------------

Fixed inbound QoS limits not working.

Fixed (once again) PPTP conntrack helper, disabled RTSP conntrack by default
since it seems to cause problems with other conntrack helpers.

Fixes for LEDs behavior on Netgear WNR3500L.

Fixed build process that could produce a non-bootable image in some rare
cases (1:127 probability).

Another set of backports from kernel 2.6 mainstream tree (network layer and
memory allocator) to fix various kernel bugs and improve the overall
performance.

Applied Samba 3 security patches from samba.org.

Minor Ethernet driver updates from Broadcom SDK 5.10.140.x.

Software updates: Busybox updated to the latest ver. 1.16.1,
usb_modeswitch (in Extras build) is updated to ver. 1.1.2 (with included
new-style configuration files).

Tuned up some kernel parameters to improve stability of memory- and
bandwidth- hungry applications, like torrent clients.

Allowed to flash back Netgear .chk firmware images (via mtd-write command).

Added option to erase NVRAM after flashing the new firmware image - useful
when flashing to other firmwares.

Included NFQUEUE Netfilter target.

Included fsync command (Busybox applet) into USB Extras builds.

Non-USB Std kernel 2.6-based build now includes JFFS support, with ~192KB of
usable JFFS space available on 4MB flash.

Fixed display of some password fields (FTP users and Samba passwords) in GUI
to use dots when editor doesn't have focus.

Included some changes from official Tomato 1.28 beta (GUI option to select
which menus are expanded, increased PPPoE username/password length, warn
if saving an empty Access Restriction).

Cosmetics.


build 46 - 05/29/2010
---------------------

Fixed upnp bug when NAT-PMP redirections were expired prematurely.

D-Link DIR-320 support: the router should retain its original MAC address
after flashing with Tomato.

Software updates: Busybox updated to the latest ver. 1.16.1 with additional
patches from trunk, miniupnpd 1.4 (20100511), ntfs-3g (in Extras builds)
2010-05-16, usb_modeswitch (in Extras builds) is updated to ver. 1.1.2
(with included new-style configuration files), libusb 1.0.8 (some of these
updates were already present in K26 beta11 builds).

Fixed bug in Samba configuration allowing Linux clients to bypass
authentication even when authentication is set to "required" in the GUI.

Slightly improved Samba compatibility with Windows clients (do not use
"share" mode).

Fixed obtaining label/uuid from swap partitions.

Added Wireless Interference Level to Status -> Overview GUI page (for APs
in 40Mhz wireless-N mode).

Do not restart FTP/Samba on every USB partition unmount - do it only if the
partition can't be unmounted otherwise.

Modified USB after-mount and before-unmount scripts. Now they are called
for every partition getting mounted or unmounted, and they get one parameter
- the mountpoint (can be examined in addition to the environment variables).

Added minimalistic tune2fs Busybox applet to the Extras build - only
supports the "label" (-L <lbl>) option.

Improve automatic reconnect for PPTP/L2TP WAN connections.

Fixed DHCP lease renewal with some broken ISPs.

Fixed minor memory leak in iptables2.

Fixed domain name corruption in Dnsmasq.

Added mime handler to Tomato http server for proxy autodiscovery files.

Removed "Reduce packet size" option from the GUI DHCP settings - this is
always enabled now.

Added option to erase NVRAM after flashing the new firmware image - useful
when flashing to other firmwares. This was already in K26 beta11 builds.

Fixed display of some password fields (FTP users and Samba passwords) in GUI
to use dots when editor doesn't have focus. This was already in K26 beta11
builds.

Modified the build system to allow more flexible firmware configurations.

Cosmetics and code cleanup.

* Kernel 2.4-based builds only:

Additional USB 2.0 driver updates/fixes backported from kernel 2.6.

Some fixes and updates backported from kernel 2.6 tree in network support
modules.

Allow mounting of USB discs with no partitions.

Extra utilities (e2fsck, mke2fs) are removed from VPN build to reduce the
size and to make it fit into 4MB flash.

* Kernel 2.6-based builds only (changes from beta11 to beta14):

Updated Broadcom wireless driver and SDK to version 5.10.147.0
(experimental).

Added Media Server (MiniDLNA 1.0.17, http://minidlna.sourceforge.net) to
Extras and VPN builds.

Fixed bug causing error in the GUI trying to save negative numeric values
(i.e. the default "-1" value for "TLS Renegotiation Time" in VPN builds).

Updates for USB kernel drivers backported from newer kernel 2.6 tree.

Various kernel fixes and updates backported from kernel 2.6 tree in
networking support modules, MIPS CPU support, ext3/fat fs support.

Fixed regression in beta11 that decreased USB transfer speed for some
devices.

Included ebtables 2.0.9-2 into Extras and VPN builds.

Added maxSize parameter for usb_serial module to specify USB endpoint
size.

ftdi_sio.ko and pl2301.ko modules are now included into Extras builds.

CIFS module updated to ver 1.52: backported from kernel 2.6.24.

In Extras and USB builds the standard uClibc libraries are not getting
stripped out of unused symbols to make it easier to use additional custom
compiled software.

Added preliminary support for Linksys WRT320N (thanks to Dominique) and
Netgear WNR2000v2 (untested).

Fixed flashing with Netgear .chk images from Web GUI (untested).


build 47 - 06/03/2010
---------------------

Added Busybox sendmail applet to Extras and no-USB Std builds.

Added basename command to all builds except Lite.

Fixed proxy autodiscovery mime handler to not require authorization.

Software updates: ntfs-3g release 2010.5.22 (in Extras builds),
Dnsmasq 2.55, MiniDLNA 1.0.18 (cvs 2010-06-09).

Added "nvram erase" command.

Fixed issue with overriding vlan ports configuration on every reboot.

Fixed error saving settings on "Advanced->Wireless" page for Buffalo
routers.

Allowed to append custom content to /etc/[passwd|group|shadow|gshadow]
files.

Changed dropbear config to simplify using Optware openssh-sftp-server.

Cosmetics.

* Kernel 2.4-based builds only:

Fixed regression introduced in build 46 when empty USB cardreaders cause
the USB GUI page to hang for a long time.

* Kernel 2.6-based builds only (changes from beta14 to beta15):

Fixed flashing power led on Linksys routers: WRT320N and WRT54G-TM.

Fixed kernel warning messages (introduced in beta 14) in the system log
when using VPN.

* Kernel 2.6-based builds only (changes from beta15 to beta16):

Reverted Broadcom wireless driver binaries back to version 5.10.56.46
since the new driver caused intermittent problems with port forwarding
and UPnP. Included some updates extracted from the new Broadcom SDK
("fast NAT" module, wifi security binaries (nas/eapd), minor patches
for wlconf utility).

Removed JFFSv1 support from Non-USB Std build since JFFSv1 for kernel
2.6 seems to be buggy and causes various problems, while JFFS2 is too
big to be useful on 4MB flash.

Fixed detection of some non-standard or invalid partition table entries.

Fixed VLAN initialization for Asus RT-N10.

Fixed support for Netgear WNR2000v2.


build 48 - 07/23/2010
---------------------

Merged with official Tomato 1.28 update.

Software updates: Busybox 1.16.2, usb-modeswitch 1.1.3 with data
package 2010-07-07.

Added NETMAP iptables target.

Wireless N-mode support: added GUI option to configure Control Sideband,
fixed issue causing 40MHz bandwidth to be disabled in N-only mode.

Added GUI options to configure Vendor Class and Requested IP for DHCP
client.

JFFSv1 is updated to ver. 1.4 (updates by ray123): fixed system crash
in kernel 2.6, removed BKL, a few bug fixes, clean-up.

Remstored "Reduce packet size" GUI option for DHCP settings - apparently
some ISPs don't like truncated packets.

DNS vunerability fix: turned on rebinding protection in dnsmasq (see
http://blogs.forbes.com/firewall/2010/07/13/
millions-of-home-routers-vulnerable-to-web-hack).

Samba: do not explicitly disable dns proxy.

Backported various fixes and optimization patches from upstream kernel 2.6.

Minor bug fixes and cosmetics.

* Kernel 2.4-based builds only:

CIFS updated to version 1.50 backported from kernel 2.6.

* Kernel 2.6-based builds only (beta18):

Disabled Broadcom "fast NAT" module - this should fix various problems with
Access Restrictions, QOS, VPN and iptables rules.

Software update: MiniDLNA 1.0.18 (cvs 2010-07-21).


build 49 - 08/02/2010
---------------------

This is a hot-fix release fixing a problem with OpenVPN not working in
build 48. This build (including K26 beta19 builds) only exists for VPN
editions.


build 50 - 09/04/2010
---------------------

Added Web Monitoring (domains and searches) with GUI using kernel and
iptables modules by Eric Bishop from Gargoyle Project
(http://www.gargoyle-router.com).

DNS rebinding protection in dnsmasq is now optional (can be turned off
in GUI). Fixed connectivity issues with some applications (i.e. Netflix
iPad app) related to this protection being active.

Support for Asus WL-500g Deluxe (untested), fixed support for Linksys
WRT-300Nv1 in both - K26 and K24 - builds.

Added Hurricane Electric IPv6 Tunnel Broker IPv4 endpoint address updater
to Dynamic DNS services.

Added Unicode support to httpd server - used for Web Usage display, and to
show commands output on the Tools->System screen.

Fixed error displaying USB Support GUI page when attached drive's label or
model name contains quotes.

Fixed timing bugs with restarting dnsmasq and other services - thanks to Ray
<ray123> for finding and analyzing these problems.

Allowed auto-mount of file systems not supported by the firmware as long as
corresponding kernel module for this file system is loaded.

Allowed to set radio power up to 400mW (26dBm) - this will only work for
some router models and some countries.

Removed some Busybox applets (ftpput, clear, setconsole) from Lite builds
to reduce size.

Minor CIFS kernel driver fixes from upstream.

Software updates: PPTP kernel drivers and accell-pptp client 0.8.5-rc1,
Busybox 1.17.2, FTP Server (vsftpd) 2.3.2, ntfs-3g 2010.8.8 (in Extras
builds), usb_modeswitch 1.1.4 with data package 2010-08-26.

Toolchain: updated binutils to ver. 2.20.1.

Simplified custom builds by allowing to specify nvram size at compile time
(can be used to make special builds for Linksys E-series routers with 60KB
nvram).

Cosmetics and code clean up.

* Kernel 2.6-based builds only (beta20):

Support for dual-band (2.4 and 5 GHz) wireless-N radios. Only single radio
interface is currently supported and can be configured via GUI (so no
simultaneous dual-band just yet). Tested on Linksys WRT-320N. Experimental
(not tested) support for Linksys WRT-610Nv2 (single radio only). Many thanks
to Dominique <dbt78> for pilot implementation and lots of testing!

Fixed very bad misconfiguration issue witn MiniDLNA media server causing it
to erase all files in the media directory if the same directory is specified
as the media database location.

Fixed board data partition size for Netgear routers to prevent flashing a
firmware image that's too big.

Fixed occasional wireless disconnects during data transfers for some
routers (namely Asus RT-N12, other models might be affected too).

Disabled DFS server in Samba 3 to prevent errors when using with certain
Linux clients (thanks to yatu for finding the issue and suggesting a fix).

Fixed /dev/null, /dev/zero, /dev/gpio nodes permissions for non-priveledged
users (needed for some additional software).

Preliminary support for IPv6 in Extras and USB+VPN editions: all required
kernel modules are included, iptables and other user space applications are
compiled with IPv6 support activated, included radvd daemon. Firewall is not
configured, no GUI configuration exists yet, and by default IPv6 is disabled
on all interfaces!

Various kernel bug fixes and optimization patches backported from upstream
2.6 kernel (mostly network/conntrack and USB related): about 20 to 30%
better WAN-LAN throughput than in build 48 (beta18).

Added support for GUID (EFI) partition tables.

Removed unused decoders from building FFMpeg library used by MiniDLNA -
significant size reduction.

Software updates: MiniDLNA 1.0.18 (cvs 2010-08-31), libraries used by
MiniDLNA (sqlite 3.7.2, zlib 1.2.5, FFMpeg 0.6).


build 51 - 10/04/2010
---------------------

Access Restrictions criteria: allow to specify Src/Dst Address, expand list
of available protocols.

Allow to specify hostnames in addition to IP addresses for iptables rules
(port forwarding, access restrictions, QoS).

Allow to specify hostname in addition to IP address for remote logging.

Replaced old Tomato's bcount match by standard connbytes match.

Added "Interference Mitigation" setting to Advanced->Wireless.

L2TP client daemon replaced with xl2tpd 1.2.7 (should provide better
performance).

Execute *.autorun scripts loaded from nvram.

Web Usage: added GUI option to clear web usage logs.

Added additional timing options for syslog marker output.

Display nvram usage on Administration->Configuration page.

PPTP/L2TP WAN connections: fixed routing and firewall rules for internal
ISP network (MAN), allow to specify static routes for MAN interface, added
support for MPPE/MPPC encryption/compression, added custom options to GUI.

Added support for ZTE ZXV10 H618B, Linksys WRT310N v1 and v2 routers.

Fixed support for D-Link DIR-320, Asus WL-500G Deluxe.

Fixed bugs in signal processing and restarting service applications.

Fixed support for DHCP classless static routes broken in build 50.

Fixed wireless channel selection in GUI when switching between B/G/N modes.

Disabled loading USB 1.1 module (ohci or uhci) for non-existing controllers
on Asus routers.

Include additional iptables matches: quota, hl (K26 only).

Software updates: Linux kernel 2.4.37.10, MiniUPnPd 1.4 20100921, pppd (fixes
from upstream), ntfs-3g (in Extras builds) 2010.10.2.

Code clean-up, minor bug fixes, cosmetics.

* Kernel 2.4-based builds only:

Toolchain: switch kernel 2.4 builds to use gcc 4.2.4 for userspace apps,
binutils 2.20.1, updated binary 32-bit toolchain.

* Kernel 2.6-based builds only (beta22):

Fixed bugs in conntrack modules forward-ported from kernel 2.4.

GUI cosmetics: display a message on "Media Server" page when directory scan
is in progress.

Restored JFFS in K26 Std builds (was disabled in build 50).

Write checksum to the end of mtd block during firmware flash on Netgear
routers: this should fix flashing back to the OEM firmware.

Various kernel bug fixes and performance-related patches backported from
upstream 2.6 kernel.

Expanded set of available extra kernel modules - included modules for HID,
sound and webcam (UVC) support.

Software updates: MiniDLNA 1.0.18.2 (cvs 2010-09-28), radvd 1.6, Samba
3.0.37 (latest in 3.0 series) with security fixes from samba.org
(CVE 2010-2063, CVE 2010-3069).


build 52 - 10/15/2010
---------------------

Fixed WAN Up script not being executed.

Fixed obtaining DHCP lease from Corbina Beeline and possibly other ISPs
(was broken in build 51).

Fixed DHCP renewal processing to not replace the default gateway and DNS
servers for PPTP/L2TP connections.

Added "Use Default Gateway on Remote Network" option for PPTP/L2TP
connection types (turned on by default). Turn it off to use gateway obtained
via DHCP for internet routing, and only use PPTP/L2TP gateway for VPN
subnet (custom routing may be required in case if VPN network contains
multiple subnets).

Resolve sporadic PPPoE disconnect issues with some ISPs.

Allow to configure custom TTL values in the Web GUI.

Make sure PPTP/L2TP is gracefully disconnected after firmware upgrades and
after restoring configuration to prevent connection problems after reboot.

Size optimization of some large applications.

Software updates: PPTP kernel driver 0.8.5, Busybox 1.17.3.

Cosmetics.

* Kernel 2.6-based builds only (beta23):

Fixed Mini build for Netgear routers with 4MB flash (WNR2000v2, WNR3500v2),
removed RIPv1/v2 routing from Mini build due to Netgear size restrictions,
added JFFS to Mini build to make use of some otherwise wasted flash space.

Fixed flashing all supported Netgear routers back to OEM firmware.

Media server: removed some rare and obsolete demuxers to reduce size,
reduced MiniDLNA memory usage.

Minor backports from upstream 2.6 kernel.


build 53 - 11/26/2010
---------------------

Support for simultaneous dual-band (dual-radio models) wireless. Currently
only 2 dual-radio models are supported, and only by K26 builds: Linksys
WRT610Nv2 and Linksys E3000.

GUI cosmetics: display size of unmounted JFFS partitions, display free
space on mounted USB partitions.

Fixed LAN ports numbering for WRT310Nv2.

Support for Linksys WRT160Nv1, Ovislink WL1600GL routers.

Fixed syslog losing log messages at system startup.

PPTP/L2TP WAN connection types: allowed to specify separate gateway for
physical WAN connection when not using DHCP.

More fixes for dnsmasq startup race conditions.

Improved timing in executed scripts, misc enhancements to simplify scripts.

Changed some file permissions for the benefit of non-root users.

OpenVPN: wait for time synchronization on startup up to a few seconds to
prevent potential VPN server errors.

Get rid of MatrixSSL: use OpenSSL in VPN editions and CyaSSL in non-VPN
editions to provide SSL support for httpd and ddns, use TLS v 1.0 protocol
instead of SSL v. 2/3.

Dnsmasq: restored TFTP support in all editions, added support for scripts to
Extras editions.

Allow syslog to read options from /etc/syslogd.cfg (to support saving of log
files on external storage).

Web GUI: minor css fix for USB Red and USB Blue themes, removed TCP Vegas
settings.

Software updates: OpenSSL 1.0.0b, Layer-7 filter patterns 2010-10-25,
Busybox 1.17.4.

Cosmetics and code clean-up.

* Kernel 2.4-based builds only:

Fixed regression with scsi-start/scsi-stop commands not working in K24
builds.

* Kernel 2.6-based builds only:

Full support for Linksys E2000/E3000 routers.

Ebtables: fixed targets/matches not working at all, added /etc/ethertypes.

Updated Broadcom wireless driver and SDK to version 5.10.147.0
(experimental, 2nd attempt).

Added Broadcom implementation of "Efficient Multicast Forwarding" (enable on
Advanced->Routing page). Description from Broadcom: "this module does the
efficient layer 2 forwarding of multicast streams, i.e., forward the streams
only on to the ports that have corresponding group members there by reducing
the bandwidth utilization and latency".

Do not use "passive" mode for wireless scans - with 5.x.x.x wireless driver
it doesn't work in client modes.

Included WIDE-DHCPv6 client (no GUI support yet) and IPv6 connbytes match
into IPv6-enabled builds.

Applied latest kernel patches from linux-mips.org (up to 2010-11-10).

Minor backports from upstream 2.6 kernel.

Rebuilt binary toolchain (32-bit) with additional uClibc patches.

Software updates: MiniDLNA 1.0.18.2 (cvs 2010-11-24).

Removed separate numbering for "beta" builds.


build 54 - 11/29/2010
---------------------

Hotfix release for regressions introduced in previous build 53.

Fixed: router is unable to obtain WAN IP from DHCP after nvram erase.

Fixed: Web GUI validation rules on Basic->Network page.

Fixed: unable to access the router Web GUI via https after upgrade if SSL
certificate has been previously saved to NVRAM.

Fixed: firmware upgrades via HTTPS not working.

* Kernel 2.4-based builds only:

Fixed: "multiport" match not working with port ranges.


build 56 - TBA
---------------------

PPPoE: replaced outdated pppoecd client daemon from old Linksys GPL with
rp-pppoe 3.10.

GUI: enhancements for QoS -> Detailed page, added QoS -> Transfer Rates page.

Added DSCP matching criteria for QoS Classification.

Fixed: made MAC address set for the LAN bridge to stick.

Fixed: "EU" country code was missing from the list on "Advanced -> Wireless"
GUI page on some routers, causing it to display "Afghanistan" instead.

Fixed: display of wireless link quality for WDS connections on "Status ->
Device List" page.

Fixed: timing issue when starting OpenVPN server or client with WAN.

Fixed: GUI validation for fields allowing mixed IP addresses and hostnames.

Fixed: corrected some timezones (Guyana, Argentina, Puerto Rico) in the GUI.

Fixed: DHCP release not working when using "Release" button in the GUI.

Changed some nvram defaults to more sane values.

Clear conntrack entries on WAN-Up - this should fix some SIP devices not
being able to register after restart of the router.

Hostnames specified for firewall rules (port forwarding, QoS, source IP
restrictions, access restrictions, web monitor, etc) are now validated upon
firewall start, skipping creation of rules with non-resolvable names, and
logging this to the system log (instead of completely aborting the firewall
startup).

Changed httpd so only one instance is needed to support http and https on
all interfaces.

Changed httpd and ssh (dropbear) to actually listen on WAN interface (when
remote access is enabled) instead of using port forwarding. This also fixes
some of the redirections in Web GUI not working properly if remote and local
listening http(s) ports are not the same.

FTP server in VPN builds now includes SSL support (manual configuration
only via "Vsftpd Custom Configuration" field in the GUI).

DDNS: added support for miniDNS, and for ZoneEdit DDNS updates via HTTPS,
modified HE.net IPv6 Tunnel Broker IPv4 endpoint address updater to conform
to the new HE.net interface.

Enabled support for scripts in Dnsmasq in all builds.

Allowed pre-defined "wan-ip" hostname to be used as an alias for router
WAN IPv4 address in iptables rules.

GUI: restored ability to enter multiple hostnames (space separated) per
device on "Static DHCP" page.

Software updates: OpenSSL 1.0.0d, Busybox 1.18.5, CyaSSL 1.9.0, p910nd 0.95,
MiniUPnPd 1.5 (20110623), usb_modeswitch 1.1.8 with data package 2011-06-19,
Dnsmasq 2.57, Dropbear 0.53.1, ntfs-3g 2011.4.12, vsftpd 2.3.4, xl2tpd 1.2.8.

Lots of cosmetics and optimization, some code clean-up.

* Kernel 2.6-based builds only:

IPv6 support with GUI, including configuration options for native IPv6
(static or via DHCPv6-PD), 6to4 tunnel, static 6in4 tunnel, or manual.
Enabled most of the internal services for IPv6.

Stateful IPv6 firewall, with GUI configuration page for opening ports in the
IPv6 firewall, added ip6tables matches and targets.

QoS settings apply to both IPv4 and IPv6 traffic, and classification
settings apply to both where applicable.

Fixed: random crashes and reboots during USB file transfers with some USB
drives.

Fixed: router crashes after enabling IPv6 support.

Fixed: SIP helper module corrupting SIP message headers. Backported
improved SIP conntrack and NAT helper from upstream 2.6 kernel.

Fixed: ping6 doesn't get responses from Apple OS X and iOS systems.

Support for Belkin F7D3301/F7D3302/F7D4301/F7D4302/F5D8235v3 routers.

Added support for USB LED.

Various optimizations backports and fixes from upstream 2.6 kernel.

Replaced Broadcom wireless driver by version 5.10.142.0 (used 5.10.147.0 in
previous builds 53 and 54). This version seems to have better support for
certain radio chips (used in Belkin routers), and fixes 5GHz wireless
survey.

Re-enabled Broadcom "fast NAT" module. It is automatically disabled when
either QoS, web monitor, or access restrictions are activated. Additionaly
can be disabled via nvram variable ("fastnat_disable").

Expanded set of available extra kernel modules - included modules for
Philips (pwc) and GSPCA-compatible USB webcam support.

Software updates: MiniDLNA 1.0.20.2 cvs 2011-07-01, SQLite 3.7.5,
radvd 1.8.

Samba 3 CVE-2011-0719 security fix.

* Kernel 2.4-based builds only:

Linux kernel 2.4.37.11.