release/src/Makefile

   1 #
   2 # Toplevel Makefile for the BCM947xx Linux Router release
   3 #
   4 # Copyright 2005, Broadcom Corporation
   5 # All Rights Reserved.
   6 #
   7 # THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   8 # KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
   9 # SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  10 # FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  11 #
  12 # $Id: Makefile,v 1.53 2005/04/25 03:54:37 tallest Exp $
  13 #
  14
  15 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  16
  17 # To rebuild everything and all configurations:
  18 #  make distclean
  19 #  make V1=whatever V2=sub-whatever VPN=vpn3.6 a b c d m n o
  20 # The 1st "whatever" would be the build number, the sub-whatever would
  21 #       be the update to the version.
  22 #
  23 # Example:
  24 # make V1=8516 V2="-jffs.1" a b c d m s n o
  25
  26 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  27
  28
  29 export ac_cv_func_malloc_0_nonnull=yes
  30 export SRCBASE := $(shell pwd)
  31 RELEASEDIR := $(shell (cd $(SRCBASE)/.. && pwd -P))
  32 PATH := $(RELEASEDIR)/tools:$(PATH)
  33 export TPROFILE := N
  34
  35 include ./target.mak
  36
  37 # Normally you'd do something like "make V1=8516 V2=-sub-ver a b c d"
  38 # But if you don't give anything for "V1", it'll get a default from tomato_version.
  39 V1 ?= "--def"
  40 VPN ?= "VPN"
  41 ifeq ($(CONFIG_LINUX26),y)
  42 ND = "K26"
  43 else
  44 ND = "ND"
  45 endif
  46
  47 PPTPD ?= "n"
  48
  49 ifeq ($(NVRAM_SIZE),)
  50 NVRAM_SIZE = 0
  51 endif
  52
  53 -include tomato_profile.mak
  54
  55 # This could be simpler by just using $(TOMATO_PROFILE_NAME) like it used to be,
  56 # but that's fragile.  If you make one certain innocuous change elsewhere in the
  57 # makefile(s), the build will silently be wrong.  This way it works properly every time.
  58 current_BUILD_NAME = $(strip $(shell grep "^TOMATO_BUILD_NAME" tomato_profile.mak  | cut -d"=" -f2))
  59 current_BUILD_DESC = $(strip $(shell grep "^TOMATO_BUILD_DESC" tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  60 current_BUILD_USB  = $(strip $(shell grep "^TOMATO_BUILD_USB"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  61 current_TOMATO_VER = $(strip $(shell grep "TOMATO_MAJOR" router/shared/tomato_version.h  | cut -d"\"" -f2)).$(strip $(shell grep "TOMATO_MINOR" router/shared/tomato_version.h  | cut -d"\"" -f2))
  62
  63 uppercase_N = $(shell echo $(N) | tr a-z  A-Z)
  64 lowercase_N = $(shell echo $(N) | tr A-Z a-z)
  65 uppercase_B = $(shell echo $(B) | tr a-z  A-Z)
  66 lowercase_B = $(shell echo $(B) | tr A-Z a-z)
  67
  68 ifeq ($(CONFIG_LINUX26),y)
  69 mips_rev = $(if $(filter $(MIPS32),r2),MIPSR2,MIPSR1)
  70 KERN_SIZE_OPT ?= n
  71 else
  72 mips_rev =
  73 KERN_SIZE_OPT ?= y
  74 endif
  75
  76 beta = $(if $(filter $(TOMATO_EXPERIMENTAL),1),-beta,)
  77
  78 tomato_ver:
  79         @echo ""
  80         @btools/uversion.pl --gen $(V1) $(mips_rev)$(beta)$(V2) $(ND) $(current_BUILD_USB) $(current_BUILD_DESC)
  81
  82 ifeq ($(TOMATO_BUILD),)
  83
  84 all:
  85         $(MAKE) a
  86
  87 else
  88
  89 all: tomato_ver
  90         @echo ""
  91         @echo "Building Tomato $(ND) $(current_BUILD_USB) $(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2) $(current_BUILD_DESC) $(current_BUILD_NAME) with $(TOMATO_PROFILE_NAME) Profile"
  92
  93         @echo ""
  94         @echo ""
  95
  96         @-mkdir image
  97         @$(MAKE) -C router all
  98         @$(MAKE) -C router install
  99         @$(MAKE) -C btools
 100
 101         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx
 102         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 103 ifeq ($(LINKSYS_E),1)
 104         @rm -f image/tomato-E??00$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 105 endif
 106 ifeq ($(BELKIN),y)
 107 ifneq ($(NVRAM_SIZE),60)
 108         @rm -f image/tomato-F7D????$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 109         @rm -f image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 110 endif
 111 endif
 112         @echo "" >>fpkg.log
 113         @echo "***********************" `date` "************************" >>fpkg.log
 114         @cat router/shared/tomato_version >>fpkg.log
 115         @echo "" >>fpkg.log
 116         @cat router/target.info >>fpkg.log
 117 ifeq ($(wildcard include/bcm20xx.h),)
 118         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 119                 -t image/tomato.trx \
 120                 -l W54G,image/WRT54G_WRT54GL.bin \
 121                 -l W54S,image/WRT54GS.bin \
 122                 -l W54s,image/WRT54GSv4.bin \
 123                 -l W54U,image/WRTSL54GS.bin \
 124                 -m 0x10577050,image/WR850G.bin \
 125                 | tee -a fpkg.log
 126 else
 127 ifeq ($(LINKSYS_E),1)
 128         # Linksys E-series build plus generic TRX image
 129         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 130                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 131                 -l 4200,image/tomato-E4200$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 132                 -l 61XN,image/tomato-E3000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 133                 -l 32XN,image/tomato-E2000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 134                 | tee -a fpkg.log
 135 else
 136 ifeq ($(BELKIN),y)
 137 ifneq ($(NVRAM_SIZE),60)
 138         # Create Belkin images
 139         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 140                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 141                 -b 0x20100322,image/tomato-F7D3301$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 142                 -b 0x20090928,image/tomato-F7D3302$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 143                 -b 0x20091006,image/tomato-F7D4302$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 144                 -b 0x00017116,image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 145                 | tee -a fpkg.log
 146 endif
 147 else
 148         # Create generic TRX image
 149         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 150                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 151                 | tee -a fpkg.log
 152 endif
 153 endif
 154 endif
 155
 156         @cp fpkg.log image/fpkg-$(V1)$(mips_rev)$(beta)$(V2).log
 157         @echo ""
 158         @echo "-----------------"
 159         @echo `cat router/shared/tomato_version` " ready"
 160         @echo "-----------------"
 161 ifneq ($(NOVERSION),1)
 162         @cp router/shared/tomato_version router/shared/tomato_version_last
 163         @btools/uversion.pl --bump
 164 endif
 165 endif
 166
 167
 168
 169 clean:
 170         @touch router/.config
 171         @rm -f router/config_[a-z]
 172         @rm -f router/busybox/config_[a-z]
 173         @$(MAKE) -C router $@
 174         @-rmdir router/mipsel-uclibc
 175
 176 cleanimage:
 177         @rm -f fpkg.log
 178         @rm -fr image/*
 179         @rm -f router/.config
 180         @touch router/.config
 181         @-mkdir image
 182
 183 cleantools:
 184         @$(MAKE) -C $(LINUXDIR)/scripts/squashfs clean
 185         @$(MAKE) -C btools clean
 186
 187 cleankernel:
 188         @cd $(LINUXDIR) && \
 189         mv .config save-config && \
 190         $(MAKE) distclean || true; \
 191         cp -p save-config .config || true
 192
 193 kernel:
 194         @$(MAKE) -C router kernel
 195         @ls -l $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/zImage
 196
 197 distclean: clean cleanimage cleankernel cleantools
 198 ifneq ($(INSIDE_MAK),1)
 199         @$(MAKE) -C router $@ INSIDE_MAK=1
 200 endif
 201         mv router/busybox/.config busybox-saved-config || true
 202         @$(MAKE) -C router/busybox distclean
 203         @rm -f router/busybox/config_current
 204         @cp -p busybox-saved-config router/busybox/.config || true
 205         @cp -p router/busybox/.config  router/busybox/config_current || true
 206         @rm -f router/config_current
 207         @rm -f router/.config.cmd router/.config.old router/.config
 208         @rm -f router/libfoo_xref.txt
 209         @rm -f tomato_profile.mak router/shared/tomato_profile.h
 210         @touch tomato_profile.mak
 211         @touch router/shared/tomato_profile.h
 212
 213
 214 prepk:
 215         @cd $(LINUXDIR) ; \
 216                 rm -f config_current ; \
 217                 ln -s config_base config_current ; \
 218                 cp -f config_current .config
 219         $(MAKE) -C $(LINUXDIR) oldconfig
 220 ifneq ($(CONFIG_LINUX26),y)
 221         $(MAKE) -C $(LINUXDIR) dep
 222 endif
 223
 224 what:
 225         @echo ""
 226         @echo "$(current_BUILD_DESC)-$(current_BUILD_NAME)-$(TOMATO_PROFILE_NAME) Profile"
 227         @echo ""
 228
 229
 230 # The methodology for making the different builds is to
 231 # copy the "base" config file to the "target" config file in
 232 # the appropriate directory, and then edit it by removing and
 233 # inserting the desired configuration lines.
 234 # You can't just delete the "whatever=y" line, you must have
 235 # a "...is not set" line, or the make oldconfig will stop and ask
 236 # what to do.
 237
 238 # Options for "make bin" :
 239 # BUILD_DESC (Std|Lite|Ext|...)
 240 # MIPS32 (r2|r1)
 241 # KERN_SIZE_OPT
 242 # USB ("USB"|"")
 243 # JFFSv1 | NO_JFFS
 244 # NO_CIFS, NO_SSH, NO_ZEBRA, NO_SAMBA, NO_HTTPS, NO_XXTP, NO_LIBOPT
 245 # SAMBA3, OPENVPN, IPV6SUPP, EBTABLES, NTFS, MEDIASRV, BBEXTRAS, USBEXTRAS, BCM57, SLIM, NOCAT CTF
 246 # NFS BTCLIENT BTGUI TR_EXTRAS SNMP SDHC HFS UPS DNSCRYPT PPTPD TOR IPSEC RAID
 247
 248 define RouterOptions
 249         @( \
 250         if [ "$(CONFIG_LINUX26)" = "y" ] || [ "$(SAMBA3)" = "y" ]; then \
 251                 sed -i "/TCONFIG_SAMBA3/d" $(1); \
 252                 echo "TCONFIG_SAMBA3=y" >>$(1); \
 253         fi; \
 254         sed -i "/TCONFIG_EMF/d" $(1); \
 255         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 256                 if [ "$(SLIM)" = "y" ]; then \
 257                         echo "# TCONFIG_EMF is not set" >>$(1); \
 258                 else \
 259                         echo "TCONFIG_EMF=y" >>$(1); \
 260                 fi; \
 261         else \
 262                 echo "# TCONFIG_EMF is not set" >>$(1); \
 263         fi; \
 264         sed -i "/TCONFIG_JFFSV1/d" $(1); \
 265         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 266                 if [ "$(JFFSv1)" = "y" ]; then \
 267                         echo "TCONFIG_JFFSV1=y" >>$(1); \
 268                 else \
 269                         echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 270                 fi; \
 271         else \
 272                 echo "TCONFIG_JFFSV1=y" >>$(1); \
 273         fi; \
 274         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(IPSEC)" = "y" ]; then \
 275                 echo "TCONFIG_IPSEC=y" >>$(1); \
 276         else \
 277                 echo "# TCONFIG_IPSEC is not set" >>$(1); \
 278         fi; \
 279         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(RAID)" = "y" ]; then \
 280                 echo "TCONFIG_RAID=y" >>$(1); \
 281         else \
 282                 echo "# TCONFIG_RAID is not set" >>$(1); \
 283         fi; \
 284         if [ "$(USB)" = "USB" ]; then \
 285                 sed -i "/TCONFIG_USB is not set/d" $(1); \
 286                 echo "TCONFIG_USB=y" >>$(1); \
 287                 if [ "$(USBEXTRAS)" = "y" ]; then \
 288                         sed -i "/TCONFIG_USB_EXTRAS/d" $(1); \
 289                         echo "TCONFIG_USB_EXTRAS=y" >>$(1); \
 290                 fi; \
 291                 if [ "$(NTFS)" = "y" ]; then \
 292                         sed -i "/TCONFIG_NTFS/d" $(1); \
 293                         echo "TCONFIG_NTFS=y" >>$(1); \
 294                 fi; \
 295                 if [ "$(MEDIASRV)" = "y" ]; then \
 296                         sed -i "/TCONFIG_MEDIA_SERVER/d" $(1); \
 297                         echo "TCONFIG_MEDIA_SERVER=y" >>$(1); \
 298                 fi; \
 299         else \
 300                 sed -i "/TCONFIG_USB=y/d" $(1); \
 301                 echo "# TCONFIG_USB is not set" >>$(1); \
 302         fi; \
 303         if [ "$(NO_SAMBA)" = "y" ]; then \
 304                 sed -i "/TCONFIG_SAMBASRV/d" $(1); \
 305                 echo "# TCONFIG_SAMBASRV is not set" >>$(1); \
 306         fi; \
 307         if [ "$(NO_ZEBRA)" = "y" ]; then \
 308                 sed -i "/TCONFIG_ZEBRA/d" $(1); \
 309                 echo "# TCONFIG_ZEBRA is not set" >>$(1); \
 310         fi; \
 311         if [ "$(NO_JFFS)" = "y" ]; then \
 312                 sed -i "/TCONFIG_JFFS2/d" $(1); \
 313                 echo "# TCONFIG_JFFS2 is not set" >>$(1); \
 314                 sed -i "/TCONFIG_JFFSV1/d" $(1); \
 315                 echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 316         fi; \
 317         if [ "$(NO_CIFS)" = "y" ]; then \
 318                 sed -i "/TCONFIG_CIFS/d" $(1); \
 319                 echo "# TCONFIG_CIFS is not set" >>$(1); \
 320         fi; \
 321         if [ "$(NO_SSH)" = "y" ]; then \
 322                 sed -i "/TCONFIG_SSH/d" $(1); \
 323                 echo "# TCONFIG_SSH is not set" >>$(1); \
 324         fi; \
 325         if [ "$(NO_HTTPS)" = "y" ]; then \
 326                 sed -i "/TCONFIG_HTTPS/d" $(1); \
 327                 echo "# TCONFIG_HTTPS is not set" >>$(1); \
 328         fi; \
 329         if [ "$(NO_XXTP)" = "y" ]; then \
 330                 sed -i "/TCONFIG_L2TP/d" $(1); \
 331                 echo "# TCONFIG_L2TP is not set" >>$(1); \
 332                 sed -i "/TCONFIG_PPTP/d" $(1); \
 333                 echo "# TCONFIG_PPTP is not set" >>$(1); \
 334         fi; \
 335         if [ "$(NO_LIBOPT)" = "y" ]; then \
 336                 sed -i "/TCONFIG_OPTIMIZE_SHARED_LIBS/d" $(1); \
 337                 echo "# TCONFIG_OPTIMIZE_SHARED_LIBS is not set" >>$(1); \
 338         fi; \
 339         if [ "$(EBTABLES)" = "y" ]; then \
 340                 sed -i "/TCONFIG_EBTABLES/d" $(1); \
 341                 echo "TCONFIG_EBTABLES=y" >>$(1); \
 342         fi; \
 343         if [ "$(IPV6SUPP)" = "y" ]; then \
 344                 sed -i "/TCONFIG_IPV6/d" $(1); \
 345                 echo "TCONFIG_IPV6=y" >>$(1); \
 346         fi; \
 347         if [ "$(NOCAT)" = "y" ]; then \
 348                 sed -i "/TCONFIG_NOCAT/d" $(1); \
 349                 echo "TCONFIG_NOCAT=y" >>$(1); \
 350         fi; \
 351         if [ "$(OPENVPN)" = "y" ]; then \
 352                 sed -i "/TCONFIG_LZO/d" $(1); \
 353                 echo "TCONFIG_LZO=y" >>$(1); \
 354                 sed -i "/TCONFIG_OPENVPN/d" $(1); \
 355                 echo "TCONFIG_OPENVPN=y" >>$(1); \
 356                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 357                         sed -i "/TCONFIG_FTP_SSL/d" $(1); \
 358                         echo "TCONFIG_FTP_SSL=y" >>$(1); \
 359                 fi; \
 360         fi; \
 361         if [ "$(PPTPD)" = "y" ]; then \
 362                 sed -i "/TCONFIG_PPTPD/d" $(1); \
 363                 echo "TCONFIG_PPTPD=y" >>$(1); \
 364         fi; \
 365         if [ "$(BTCLIENT)" = "y" ]; then \
 366                 sed -i "/TCONFIG_BT/d" $(1); \
 367                 echo "TCONFIG_BT=y" >>$(1); \
 368                 sed -i "/TCONFIG_BBT/d" $(1); \
 369                 echo "TCONFIG_BBT=y" >>$(1); \
 370         fi; \
 371         if [ "$(BTGUI)" = "y" ]; then \
 372                 sed -i "/TCONFIG_BT/d" $(1); \
 373                 echo "TCONFIG_BT=y" >>$(1); \
 374         fi; \
 375         if [ "$(TR_EXTRAS)" = "y" ]; then \
 376                 sed -i "/TCONFIG_TR_EXTRAS/d" $(1); \
 377                 echo "TCONFIG_TR_EXTRAS=y" >>$(1); \
 378         fi; \
 379         if [ "$(NFS)" = "y" ]; then \
 380                 sed -i "/TCONFIG_NFS/d" $(1); \
 381                 echo "TCONFIG_NFS=y" >>$(1); \
 382         fi; \
 383         if [ "$(SNMP)" = "y" ]; then \
 384                 sed -i "/TCONFIG_SNMP/d" $(1); \
 385                 echo "TCONFIG_SNMP=y" >>$(1); \
 386         fi; \
 387         if [ "$(SDHC)" = "y" ]; then \
 388                 sed -i "/TCONFIG_SDHC/d" $(1); \
 389                 echo "TCONFIG_SDHC=y" >>$(1); \
 390         fi; \
 391         if [ "$(HFS)" = "y" ]; then \
 392                 sed -i "/TCONFIG_HFS/d" $(1); \
 393                 echo "TCONFIG_HFS=y" >>$(1); \
 394         fi; \
 395         if [ "$(UPS)" = "y" ]; then \
 396                 sed -i "/TCONFIG_UPS/d" $(1); \
 397                 echo "TCONFIG_UPS=y" >>$(1); \
 398         fi; \
 399         if [ "$(DNSCRYPT)" = "y" ]; then \
 400                 sed -i "/TCONFIG_DNSCRYPT/d" $(1); \
 401                 echo "TCONFIG_DNSCRYPT=y" >>$(1); \
 402         fi; \
 403         if [ "$(TOR)" = "y" ]; then \
 404                 sed -i "/TCONFIG_TOR/d" $(1); \
 405                 echo "TCONFIG_TOR=y" >>$(1); \
 406         fi; \
 407         if [ "$(CTF)" = "y" ]; then \
 408                 sed -i "/TCONFIG_CTF/d" $(1); \
 409                 echo "TCONFIG_CTF=y" >>$(1); \
 410         fi; \
 411         )
 412 endef
 413
 414 define BusyboxOptions
 415         @( \
 416         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 417                 sed -i "/CONFIG_FEATURE_2_4_MODULES/d" $(1); \
 418                 echo "# CONFIG_FEATURE_2_4_MODULES is not set" >>$(1); \
 419                 sed -i "/CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT/d" $(1); \
 420                 echo "CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y" >>$(1); \
 421                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 422                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 423                 sed -i "/CONFIG_MKNOD/d" $(1); \
 424                 echo "CONFIG_MKNOD=y" >>$(1); \
 425                 sed -i "/CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE/d" $(1); \
 426                 echo "CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=512" >>$(1); \
 427         else \
 428                 sed -i "/CONFIG_UDHCPC=y/d" $(1); \
 429                 sed -i "/CONFIG_UDHCPC_OLD/d" $(1); \
 430                 echo "CONFIG_UDHCPC_OLD=y" >>$(1); \
 431                 echo "# CONFIG_UDHCPC is not set" >>$(1); \
 432         fi; \
 433         if [ "$(NO_CIFS)" = "y" ]; then \
 434                 sed -i "/CONFIG_FEATURE_MOUNT_CIFS/d" $(1); \
 435                 echo "# CONFIG_FEATURE_MOUNT_CIFS is not set" >>$(1); \
 436         fi; \
 437         if [ "$(BBEXTRAS)" = "y" ]; then \
 438                 sed -i "/CONFIG_SENDMAIL/d" $(1); \
 439                 echo "CONFIG_SENDMAIL=y" >>$(1); \
 440                 sed -i "/CONFIG_WHOIS/d" $(1); \
 441                 echo "CONFIG_WHOIS=y" >>$(1); \
 442                 sed -i "/CONFIG_FEATURE_SORT_BIG/d" $(1); \
 443                 echo "CONFIG_FEATURE_SORT_BIG=y" >>$(1); \
 444                 sed -i "/CONFIG_CLEAR/d" $(1); \
 445                 echo "CONFIG_CLEAR=y" >>$(1); \
 446                 sed -i "/CONFIG_NICE/d" $(1); \
 447                 echo "CONFIG_NICE=y" >>$(1); \
 448                 sed -i "/CONFIG_SETCONSOLE/d" $(1); \
 449                 echo "CONFIG_SETCONSOLE=y" >>$(1); \
 450                 sed -i "/CONFIG_SEQ/d" $(1); \
 451                 echo "CONFIG_SEQ=y" >>$(1); \
 452                 sed -i "/CONFIG_STTY/d" $(1); \
 453                 echo "CONFIG_STTY=y" >>$(1); \
 454         fi; \
 455         if [ "$(USB)" = "USB" ]; then \
 456                 if [ "$(USBEXTRAS)" = "y" ]; then \
 457                         sed -i "/CONFIG_E2FSCK/d" $(1); \
 458                         echo "CONFIG_E2FSCK=y" >>$(1); \
 459                         sed -i "/CONFIG_MKE2FS/d" $(1); \
 460                         echo "CONFIG_MKE2FS=y" >>$(1); \
 461                         sed -i "/CONFIG_FDISK/d" $(1); \
 462                         echo "CONFIG_FDISK=y" >>$(1); \
 463                         sed -i "/CONFIG_FEATURE_FDISK_WRITABLE/d" $(1); \
 464                         echo "CONFIG_FEATURE_FDISK_WRITABLE=y" >>$(1); \
 465                         sed -i "/CONFIG_MKFS_VFAT/d" $(1); \
 466                         echo "CONFIG_MKFS_VFAT=y" >>$(1); \
 467                         sed -i "/CONFIG_MKSWAP/d" $(1); \
 468                         echo "CONFIG_MKSWAP=y" >>$(1); \
 469                         sed -i "/CONFIG_FLOCK/d" $(1); \
 470                         echo "CONFIG_FLOCK=y" >>$(1); \
 471                         sed -i "/CONFIG_FSYNC/d" $(1); \
 472                         echo "CONFIG_FSYNC=y" >>$(1); \
 473                         sed -i "/CONFIG_TUNE2FS/d" $(1); \
 474                         echo "CONFIG_TUNE2FS=y" >>$(1); \
 475                         sed -i "/CONFIG_E2LABEL/d" $(1); \
 476                         echo "CONFIG_E2LABEL=y" >>$(1); \
 477                         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 478                                 sed -i "/CONFIG_LSUSB/d" $(1); \
 479                                 echo "CONFIG_LSUSB=y" >>$(1); \
 480                                 sed -i "/CONFIG_FEATURE_WGET_STATUSBAR/d" $(1); \
 481                                 echo "CONFIG_FEATURE_WGET_STATUSBAR=y" >>$(1); \
 482                                 sed -i "/CONFIG_FEATURE_VERBOSE_USAGE/d" $(1); \
 483                                 echo "CONFIG_FEATURE_VERBOSE_USAGE=y" >>$(1); \
 484                         fi; \
 485                 fi; \
 486         else \
 487                 sed -i "/CONFIG_FEATURE_MOUNT_LOOP/d" $(1); \
 488                 echo "# CONFIG_FEATURE_MOUNT_LOOP is not set" >>$(1); \
 489                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 490                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 491                 sed -i "/CONFIG_FEATURE_MOUNT_LABEL/d" $(1); \
 492                 echo "# CONFIG_FEATURE_MOUNT_LABEL is not set" >>$(1); \
 493                 sed -i "/CONFIG_FEATURE_MOUNT_FSTAB/d" $(1); \
 494                 echo "# CONFIG_FEATURE_MOUNT_FSTAB is not set" >>$(1); \
 495                 sed -i "/CONFIG_VOLUMEID/d" $(1); \
 496                 echo "# CONFIG_VOLUMEID is not set" >>$(1); \
 497                 sed -i "/CONFIG_BLKID/d" $(1); \
 498                 echo "# CONFIG_BLKID is not set" >>$(1); \
 499                 sed -i "/CONFIG_SWAPONOFF/d" $(1); \
 500                 echo "# CONFIG_SWAPONOFF is not set" >>$(1); \
 501                 sed -i "/CONFIG_CHROOT/d" $(1); \
 502                 echo "# CONFIG_CHROOT is not set" >>$(1); \
 503                 sed -i "/CONFIG_PIVOT_ROOT/d" $(1); \
 504                 echo "# CONFIG_PIVOT_ROOT is not set" >>$(1); \
 505                 sed -i "/CONFIG_TRUE/d" $(1); \
 506                 echo "# CONFIG_TRUE is not set" >>$(1); \
 507         fi; \
 508         if [ "$(IPV6SUPP)" = "y" ]; then \
 509                 sed -i "/CONFIG_FEATURE_IPV6/d" $(1); \
 510                 echo "CONFIG_FEATURE_IPV6=y" >>$(1); \
 511                 sed -i "/CONFIG_PING6/d" $(1); \
 512                 echo "CONFIG_PING6=y" >>$(1); \
 513                 sed -i "/CONFIG_TRACEROUTE6/d" $(1); \
 514                 echo "CONFIG_TRACEROUTE6=y" >>$(1); \
 515                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 516                         sed -i "/CONFIG_FEATURE_UDHCP_RFC5969/d" $(1); \
 517                         echo "CONFIG_FEATURE_UDHCP_RFC5969=y" >>$(1); \
 518                 fi; \
 519         fi; \
 520         if [ "$(SLIM)" = "y" ]; then \
 521                 sed -i "/CONFIG_AWK/d" $(1); \
 522                 echo "# CONFIG_AWK is not set" >>$(1); \
 523                 sed -i "/CONFIG_BASENAME/d" $(1); \
 524                 echo "# CONFIG_BASENAME is not set" >>$(1); \
 525                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 526                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 527                 sed -i "/CONFIG_BLKID/d" $(1); \
 528                 echo "# CONFIG_BLKID is not set" >>$(1); \
 529                 sed -i "/CONFIG_TELNET=y/d" $(1); \
 530                 echo "# CONFIG_TELNET is not set" >>$(1); \
 531                 sed -i "/CONFIG_ARPING/d" $(1); \
 532                 echo "# CONFIG_ARPING is not set" >>$(1); \
 533                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 534                 echo "# CONFIG_FEATURE_LS_COLOR is not set" >>$(1); \
 535                 sed -i "/CONFIG_CHOWN/d" $(1); \
 536                 echo "# CONFIG_CHOWN is not set" >>$(1); \
 537         else \
 538                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 539                 echo "CONFIG_FEATURE_LS_COLOR=y" >>$(1); \
 540                 sed -i "/CONFIG_FEATURE_LS_COLOR_IS_DEFAULT/d" $(1); \
 541                 echo "CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y" >>$(1); \
 542         fi; \
 543         )
 544 endef
 545
 546 define KernelConfig
 547         @( \
 548         sed -i "/CONFIG_NVRAM_SIZE/d" $(1); \
 549         echo "CONFIG_NVRAM_SIZE="$(NVRAM_SIZE) >>$(1); \
 550         sed -i "/CONFIG_CC_OPTIMIZE_FOR_SIZE/d" $(1); \
 551         if [ "$(KERN_SIZE_OPT)" = "y" ]; then \
 552                 echo "CONFIG_CC_OPTIMIZE_FOR_SIZE=y" >>$(1); \
 553         else \
 554                 echo "# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set" >>$(1); \
 555         fi; \
 556         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(MIPS32)" = "r2" ]; then \
 557                 sed -i "/CONFIG_CPU_MIPS32_R1/d" $(1); \
 558                 echo "# CONFIG_CPU_MIPS32_R1 is not set" >>$(1); \
 559                 sed -i "/CONFIG_CPU_MIPS32_R2/d" $(1); \
 560                 echo "CONFIG_CPU_MIPS32_R2=y" >>$(1); \
 561                 sed -i "/CONFIG_CPU_MIPSR1/d" $(1); \
 562                 echo "CONFIG_CPU_MIPSR2=y" >>$(1); \
 563         fi; \
 564         if [ "$(UPS)" = "y" ]; then \
 565                 sed -i "/CONFIG_INPUT=m/d" $(1); \
 566                 echo "CONFIG_INPUT=y" >>$(1); \
 567                 sed -i "/CONFIG_USB=m/d" $(1); \
 568                 echo "CONFIG_USB=y" >>$(1); \
 569                 sed -i "/CONFIG_HID=m/d" $(1); \
 570                 echo "CONFIG_HID=y" >>$(1); \
 571                 sed -i "/CONFIG_USB_HID=m/d" $(1); \
 572                 echo "CONFIG_USB_HID=y" >>$(1); \
 573                 sed -i "/CONFIG_USB_HIDDEV=m/d" $(1); \
 574                 echo "CONFIG_USB_HIDDEV=y" >>$(1); \
 575                 sed -i "/CONFIG_USB_DEVICEFS=m/d" $(1); \
 576                 echo "CONFIG_USB_DEVICEFS=y" >>$(1); \
 577         fi; \
 578         if [ "$(USB)" = "" ]; then \
 579                 sed -i "/CONFIG_EFI_PARTITION/d" $(1); \
 580                 echo "# CONFIG_EFI_PARTITION is not set" >>$(1); \
 581         fi; \
 582         if [ "$(IPV6SUPP)" = "y" ]; then \
 583                 sed -i "/CONFIG_IPV6 is not set/d" $(1); \
 584                 echo "CONFIG_IPV6=y" >>$(1); \
 585                 sed -i "/CONFIG_IP6_NF_IPTABLES/d" $(1); \
 586                 echo "CONFIG_IP6_NF_IPTABLES=y" >>$(1); \
 587                 sed -i "/CONFIG_IP6_NF_MATCH_RT/d" $(1); \
 588                 echo "CONFIG_IP6_NF_MATCH_RT=y" >>$(1); \
 589                 sed -i "/CONFIG_IP6_NF_FILTER/d" $(1); \
 590                 echo "CONFIG_IP6_NF_FILTER=m" >>$(1); \
 591                 sed -i "/CONFIG_IP6_NF_TARGET_LOG/d" $(1); \
 592                 echo "CONFIG_IP6_NF_TARGET_LOG=m" >>$(1); \
 593                 sed -i "/CONFIG_IP6_NF_TARGET_REJECT/d" $(1); \
 594                 echo "CONFIG_IP6_NF_TARGET_REJECT=m" >>$(1); \
 595                 sed -i "/CONFIG_IP6_NF_MANGLE/d" $(1); \
 596                 echo "CONFIG_IP6_NF_MANGLE=m" >>$(1); \
 597                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 598                         sed -i "/CONFIG_NF_CONNTRACK_IPV6/d" $(1); \
 599                         echo "CONFIG_NF_CONNTRACK_IPV6=m" >>$(1); \
 600                         sed -i "/CONFIG_NETFILTER_XT_MATCH_HL/d" $(1); \
 601                         echo "CONFIG_NETFILTER_XT_MATCH_HL=m" >>$(1); \
 602                         sed -i "/CONFIG_IPV6_ROUTER_PREF/d" $(1); \
 603                         echo "CONFIG_IPV6_ROUTER_PREF=y" >>$(1); \
 604                         sed -i "/CONFIG_IPV6_SIT/d" $(1); \
 605                         echo "CONFIG_IPV6_SIT=m" >>$(1); \
 606                         sed -i "/CONFIG_IPV6_SIT_6RD/d" $(1); \
 607                         echo "CONFIG_IPV6_SIT_6RD=y" >>$(1); \
 608                         sed -i "/CONFIG_IPV6_MULTIPLE_TABLES/d" $(1); \
 609                         echo "CONFIG_IPV6_MULTIPLE_TABLES=y" >>$(1); \
 610                         sed -i "/CONFIG_IP6_NF_RAW/d" $(1); \
 611                         echo "CONFIG_IP6_NF_RAW=m" >>$(1); \
 612                         sed -i "/CONFIG_IPV6_OPTIMISTIC_DAD/d" $(1); \
 613                         echo "CONFIG_IPV6_OPTIMISTIC_DAD=y" >>$(1); \
 614                         sed -i "/CONFIG_IPV6_MROUTE/d" $(1); \
 615                         echo "CONFIG_IPV6_MROUTE=y" >>$(1); \
 616                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 617                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 618                         sed -i "/CONFIG_INET6_XFRM_TUNNEL/d" $(1); \
 619                         echo "CONFIG_INET6_XFRM_TUNNEL=m" >>$(1); \
 620                         sed -i "/CONFIG_INET6_AH/d" $(1); \
 621                         echo "CONFIG_INET6_AH=m" >>$(1); \
 622                         sed -i "/CONFIG_INET6_ESP/d" $(1); \
 623                         echo "CONFIG_INET6_ESP=m" >>$(1); \
 624                         sed -i "/CONFIG_INET6_IPCOMP/d" $(1); \
 625                         echo "CONFIG_INET6_IPCOMP=m" >>$(1); \
 626                         sed -i "/CONFIG_INET6_XFRM_MODE_TRANSPORT/d" $(1); \
 627                         echo "CONFIG_INET6_XFRM_MODE_TRANSPORT=m" >>$(1); \
 628                         sed -i "/CONFIG_INET6_XFRM_MODE_TUNNEL/d" $(1); \
 629                         echo "CONFIG_INET6_XFRM_MODE_TUNNEL=m" >>$(1); \
 630                         sed -i "/CONFIG_INET6_XFRM_MODE_BEET/d" $(1); \
 631                         echo "CONFIG_INET6_XFRM_MODE_BEET=m" >>$(1); \
 632                 else \
 633                         sed -i "/CONFIG_IP6_NF_CONNTRACK/d" $(1); \
 634                         echo "CONFIG_IP6_NF_CONNTRACK=m" >>$(1); \
 635                         sed -i "/CONFIG_IP6_NF_MATCH_HL/d" $(1); \
 636                         echo "CONFIG_IP6_NF_MATCH_HL=m" >>$(1); \
 637                         sed -i "/CONFIG_IP6_NF_FTP/d" $(1); \
 638                         echo "CONFIG_IP6_NF_FTP=m" >>$(1); \
 639                         sed -i "/CONFIG_IP6_NF_MATCH_LIMIT/d" $(1); \
 640                         echo "CONFIG_IP6_NF_MATCH_LIMIT=m" >>$(1); \
 641                         sed -i "/CONFIG_IP6_NF_MATCH_CONDITION/d" $(1); \
 642                         echo "CONFIG_IP6_NF_MATCH_CONDITION=m" >>$(1); \
 643                         sed -i "/CONFIG_IP6_NF_MATCH_MAC/d" $(1); \
 644                         echo "CONFIG_IP6_NF_MATCH_MAC=m" >>$(1); \
 645                         sed -i "/CONFIG_IP6_NF_MATCH_MULTIPORT/d" $(1); \
 646                         echo "CONFIG_IP6_NF_MATCH_MULTIPORT=m" >>$(1); \
 647                         sed -i "/CONFIG_IP6_NF_MATCH_MARK/d" $(1); \
 648                         echo "CONFIG_IP6_NF_MATCH_MARK=m" >>$(1); \
 649                         sed -i "/CONFIG_IP6_NF_MATCH_LENGTH/d" $(1); \
 650                         echo "CONFIG_IP6_NF_MATCH_LENGTH=m" >>$(1); \
 651                         sed -i "/CONFIG_IP6_NF_MATCH_STATE/d" $(1); \
 652                         echo "CONFIG_IP6_NF_MATCH_STATE=m" >>$(1); \
 653                         sed -i "/CONFIG_IP6_NF_TARGET_MARK/d" $(1); \
 654                         echo "CONFIG_IP6_NF_TARGET_MARK=m" >>$(1); \
 655                         sed -i "/CONFIG_IP6_NF_TARGET_TCPMSS/d" $(1); \
 656                         echo "CONFIG_IP6_NF_TARGET_TCPMSS=m" >>$(1); \
 657                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 658                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 659                 fi; \
 660         fi; \
 661         sed -i "/CONFIG_BCM57XX/d" $(1); \
 662         if [ "$(BCM57)" = "y" ]; then \
 663                 echo "CONFIG_BCM57XX=m" >>$(1); \
 664         else \
 665                 echo "# CONFIG_BCM57XX is not set" >>$(1); \
 666         fi; \
 667         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(EBTABLES)" = "y" ]; then \
 668                 sed -i "/CONFIG_BRIDGE_NF_EBTABLES/d" $(1); \
 669                 echo "CONFIG_BRIDGE_NF_EBTABLES=m" >>$(1); \
 670                 if [ "$(IPV6SUPP)" = "y" ]; then \
 671                         sed -i "/CONFIG_BRIDGE_EBT_IP6/d" $(1); \
 672                         echo "CONFIG_BRIDGE_EBT_IP6=m" >>$(1); \
 673                 fi; \
 674         fi; \
 675         )
 676 endef
 677
 678
 679 bin:
 680 ifeq ($(B),)
 681         @echo $@" is not a valid target!"
 682         @false
 683 endif
 684         @cp router/config_base router/config_$(lowercase_B)
 685         @cp router/busybox/config_base router/busybox/config_$(lowercase_B)
 686         @cp $(LINUXDIR)/config_base $(LINUXDIR)/config_$(lowercase_B)
 687
 688         $(call RouterOptions, router/config_$(lowercase_B))
 689         $(call KernelConfig, $(LINUXDIR)/config_$(lowercase_B))
 690         $(call BusyboxOptions, router/busybox/config_$(lowercase_B))
 691
 692         @$(MAKE) setprofile N=$(TPROFILE) B=$(B) DESC="$(BUILD_DESC)" USB="$(USB)"
 693         @$(MAKE) all
 694
 695 ## mini-USB - K24 only
 696 n:
 697 ifneq ($(CONFIG_LINUX26),y)
 698         @$(MAKE) bin BBEXTRAS=y USBEXTRAS=y B=E BUILD_DESC="mini-USB" USB="USB"
 699 endif
 700
 701 ## VPN
 702 e:
 703 ifeq ($(CONFIG_LINUX26),y)
 704         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="$(VPN)" USB="USB" SNMP=y DNSCRYPT=y PPTPD=y
 705 else
 706         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y B=E BUILD_DESC="$(VPN)" USB="USB" SNMP=y DNSCRYPT=y PPTPD=y
 707 endif
 708
 709 ## BTgui-VPN
 710 c:
 711 ifeq ($(CONFIG_LINUX26),y)
 712         @$(MAKE) bin NTFS=y OPENVPN=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="BTgui-VPN" USB="USB" BTGUI=y SNMP=y HFS=y DNSCRYPT=y PPTPD=y
 713 else
 714         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="BTgui" USB="USB" BTGUI=y HFS=y DNSCRYPT=y PPTPD=y
 715 endif
 716
 717 ## Nocat-VPN
 718 d:
 719 ifeq ($(CONFIG_LINUX26),y)
 720         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Nocat-VPN" USB="USB" BTGUI=y NOCAT=y OPENVPN=y SNMP=y DNSCRYPT=y PPTPD=y NO_CIFS=y NO_JFFS=y
 721 else
 722         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Nocat-VPN" USB="USB" BTGUI=y NOCAT=y OPENVPN=y SNMP=y DNSCRYPT=y PPTPD=y NO_CIFS=y NO_JFFS=y
 723 endif
 724
 725 ## TOR-VPN
 726 g:
 727 ifeq ($(CONFIG_LINUX26),y)
 728         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Tor-VPN" USB="USB" BTGUI=y TOR=y OPENVPN=y PPTPD=y NO_CIFS=y NO_JFFS=y
 729 else
 730         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Tor-VPN" USB="USB" BTGUI=y TOR=y OPENVPN=y PPTPD=y NO_CIFS=y NO_JFFS=y
 731 endif
 732
 733 ## BT
 734 u:
 735 ifeq ($(CONFIG_LINUX26),y)
 736         @$(MAKE) bin NTFS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="BT" USB="USB" BTCLIENT=y
 737 else
 738         @$(MAKE) bin NTFS=y USBEXTRAS=y B=M BUILD_DESC="BT" USB="USB" BTCLIENT=y
 739 endif
 740
 741 ## BT-VPN
 742 t:
 743 ifeq ($(CONFIG_LINUX26),y)
 744         @$(MAKE) bin OPENVPN=y NTFS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="BT-VPN" USB="USB" BTCLIENT=y NO_JFFS=y PPTPD=y
 745 else
 746         @$(MAKE) bin OPENVPN=y NTFS=y USBEXTRAS=y B=M BUILD_DESC="BT-VPN" USB="USB" BTCLIENT=y NO_JFFS=y PPTPD=y
 747 endif
 748
 749 ## Big-VPN
 750 b:
 751 ifeq ($(CONFIG_LINUX26),y)
 752         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Big-VPN" USB="USB" BTGUI=y NFS=y NOCAT=y OPENVPN=y DNSCRYPT=y PPTPD=y NO_JFFS=y NO_CIFS=y
 753 else
 754         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Big-VPN" USB="USB" BTGUI=y NOCAT=y NFS=y OPENVPN=y DNSCRYPT=y PPTPD=y NO_JJFS=y NO_CIFS=y
 755 endif
 756
 757 ## Mega-VPN
 758 o:
 759 ifeq ($(CONFIG_LINUX26),y)
 760         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="Mega-VPN" USB="USB" NOCAT=y BTCLIENT=y DNSCRYPT=y SNMP=y UPS=y PPTPD=y TR_EXTRAS=y TOR=y IPSEC=y RAID=y
 761 endif
 762
 763 ## All-In-One (AIO) MIPS1 - only for router with more than 8MB flash!! ZTE H618B
 764 z:
 765 ifeq ($(CONFIG_LINUX26),y)
 766         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="AIO" USB="USB" NOCAT=y BTCLIENT=y TR_EXTRAS=y NFS=y SNMP=y HFS=y DNSCRYPT=y UPS=y PPTPD=y TOR=y IPSEC=y RAID=y
 767 endif
 768
 769 #################################
 770
 771 ifeq ($(CONFIG_LINUX26),y)
 772
 773 ## Mini - targeted for Netgear routers
 774 f:
 775         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_ZEBRA=y B=F BUILD_DESC="Mini" USB=""
 776
 777 ## MiniIPv6 - for 4MB routers
 778 i:
 779         @$(MAKE) bin NO_JFFS=y NO_CIFS=y NO_ZEBRA=y IPV6SUPP=y B=I BUILD_DESC="MiniIPv6" USB=""
 780
 781 ## MiniVPN - for 4MB routers
 782 j:
 783         @$(MAKE) bin NO_JFFS=y NO_CIFS=y NO_ZEBRA=y B=V BUILD_DESC="MiniVPN" USB="" PPTPD=y OPENVPN=y
 784 endif
 785
 786 ## VPN with no USB support (IPv6 in K26 build)
 787 v:
 788 ifeq ($(CONFIG_LINUX26),y)
 789         @$(MAKE) bin OPENVPN=y NO_JFFS=y B=V BUILD_DESC="IPv6-$(VPN)" USB="" SNMP=y PPTPD=y IPV6SUPP=y
 790 else
 791         @$(MAKE) bin OPENVPN=y BBEXTRAS=y BCM57=y B=V BUILD_DESC="$(VPN)" USB="" SNMP=y PPTPD=y
 792 endif
 793
 794 ## Max build for router with 8MB flash without USB Support (like WRT54GS v1)
 795 m:
 796 ifeq ($(CONFIG_LINUX26),y)
 797         @$(MAKE) bin OPENVPN=y BBEXTRAS=y EBTABLES=y IPV6SUPP=y B=E BUILD_DESC="Max" USB="" NOCAT=y NFS=y SNMP=y DNSCRYPT=y PPTPD=y TOR=y IPSEC=y
 798 else
 799         @$(MAKE) bin OPENVPN=y BBEXTRAS=y B=E BUILD_DESC="Max" USB="" NOCAT=y NFS=y SNMP=y DNSCRYPT=y PPTPD=y TOR=y
 800 endif
 801
 802 ## SD-VPN - Only k24
 803 w:
 804 ifneq ($(CONFIG_LINUX26),y)
 805         @$(MAKE) bin OPENVPN=y BBEXTRAS=y BCM57=y B=V BUILD_DESC="SD-VPN" USB="" SDHC=y SNMP=y DNSCRYPT=y PPTPD=y
 806 endif
 807
 808
 809 ## Make Mips32r2 builds ##
 810
 811 #AIO MIPS2 for RT-N16 and E4200
 812 r2z:
 813         @$(MAKE) z MIPS32=r2
 814
 815 r2e:
 816         @$(MAKE) e MIPS32=r2
 817
 818 r2c:
 819         @$(MAKE) c MIPS32=r2
 820
 821 r2u:
 822         @$(MAKE) u MIPS32=r2
 823
 824 r2t:
 825         @$(MAKE) t MIPS32=r2
 826
 827 r2d:
 828         @$(MAKE) d MIPS32=r2
 829
 830 r2g:
 831         @$(MAKE) g MIPS32=r2
 832
 833 r2b:
 834         @$(MAKE) b MIPS32=r2
 835
 836 r2o:
 837         @$(MAKE) o MIPS32=r2
 838
 839 r2f:
 840         @$(MAKE) f MIPS32=r2 BELKIN=y
 841
 842 r2i:
 843         @$(MAKE) i MIPS32=r2
 844
 845 r2j:
 846         @$(MAKE) j MIPS32=r2
 847
 848 r2v:
 849         @$(MAKE) v MIPS32=r2
 850
 851 r2m:
 852         @$(MAKE) m MIPS32=r2
 853
 854 #AIO for E4200
 855 n60z:
 856         @$(MAKE) r2z NVRAM_SIZE=60 LINKSYS_E=1
 857
 858 n60e:
 859         @$(MAKE) r2e NVRAM_SIZE=60 LINKSYS_E=1
 860
 861 n60c:
 862         @$(MAKE) r2c NVRAM_SIZE=60 LINKSYS_E=1
 863
 864 n60u:
 865         @$(MAKE) r2u NVRAM_SIZE=60 LINKSYS_E=1
 866
 867 n60t:
 868         @$(MAKE) r2t NVRAM_SIZE=60 LINKSYS_E=1
 869
 870 n60b:
 871         @$(MAKE) r2b NVRAM_SIZE=60 LINKSYS_E=1
 872
 873 n60d:
 874         @$(MAKE) r2d NVRAM_SIZE=60 LINKSYS_E=1
 875
 876 n60g:
 877         @$(MAKE) r2g NVRAM_SIZE=60 LINKSYS_E=1
 878
 879 n60o:
 880         @$(MAKE) r2o NVRAM_SIZE=60 LINKSYS_E=1
 881
 882 n60v:
 883         @$(MAKE) r2v NVRAM_SIZE=60 LINKSYS_E=1
 884
 885 n60m:
 886         @$(MAKE) r2m NVRAM_SIZE=60 LINKSYS_E=1
 887
 888 setprofile:
 889         echo '#ifndef TOMATO_PROFILE' > router/shared/tomato_profile.h
 890         echo '#define TOMATO_$(N) 1' >> router/shared/tomato_profile.h
 891         echo '#define PROFILE_G 1' >> router/shared/tomato_profile.h
 892         echo '#define PROFILE_N 2' >> router/shared/tomato_profile.h
 893         echo '#define TOMATO_PROFILE PROFILE_$(N)' >> router/shared/tomato_profile.h
 894         echo '#define TOMATO_PROFILE_NAME "$(N)"' >> router/shared/tomato_profile.h
 895         echo '#define TOMATO_BUILD_NAME "$(B)"' >> router/shared/tomato_profile.h
 896         echo '#define TOMATO_BUILD_DESC "$(DESC)"' >> router/shared/tomato_profile.h
 897         echo '#ifndef CONFIG_NVRAM_SIZE' >> router/shared/tomato_profile.h
 898         echo '#define CONFIG_NVRAM_SIZE $(NVRAM_SIZE)' >> router/shared/tomato_profile.h
 899         echo '#endif' >> router/shared/tomato_profile.h
 900         echo '#endif' >> router/shared/tomato_profile.h
 901
 902         echo 'TOMATO_$(N) = 1' > tomato_profile.mak
 903         echo 'PROFILE_G = 1' >> tomato_profile.mak
 904         echo 'PROFILE_N = 2' >> tomato_profile.mak
 905         echo 'TOMATO_PROFILE = $$(PROFILE_$(N))' >> tomato_profile.mak
 906         echo 'TOMATO_PROFILE_NAME = "$(N)"' >> tomato_profile.mak
 907         echo 'TOMATO_BUILD = "$(B)"' >> tomato_profile.mak
 908         echo 'TOMATO_BUILD_NAME = "$(B)"' >> tomato_profile.mak
 909         echo 'TOMATO_BUILD_DESC = "$(DESC)"' >> tomato_profile.mak
 910         echo 'TOMATO_PROFILE_L = $(lowercase_N)' >> tomato_profile.mak
 911         echo 'TOMATO_PROFILE_U = $(uppercase_N)' >> tomato_profile.mak
 912         echo 'TOMATO_BUILD_USB = "$(USB)"' >> tomato_profile.mak
 913
 914         echo 'export EXTRACFLAGS := $(EXTRA_CFLAGS) -DBCMWPA2 -funit-at-a-time -Wno-pointer-sign -mtune=mips32 -mips32 $(if $(filter $(NVRAM_SIZE),0),,-DCONFIG_NVRAM_SIZE=$(NVRAM_SIZE))' >> tomato_profile.mak
 915
 916 # Note that changes to variables in tomato_profile.mak don't
 917 # get propogated to this invocation of make!
 918         @echo ""
 919         @echo "Using $(N) profile, $(B) build config."
 920         @echo ""
 921
 922         @cd $(LINUXDIR) ; \
 923                 rm -f config_current ; \
 924                 ln -s config_$(lowercase_B) config_current ; \
 925                 cp -f config_current .config
 926
 927         @cd router/busybox && \
 928                 rm -f config_current ; \
 929                 ln -s config_$(lowercase_B) config_current ; \
 930                 cp config_current .config
 931
 932         @cd router ; \
 933                 rm -f config_current ; \
 934                 ln -s config_$(lowercase_B) config_current ; \
 935                 cp config_current .config
 936
 937         @$(MAKE) -C router oldconfig
 938
 939 help:
 940         @echo "n            Mini-USB - for oruter with 4MB flash and USB port - K24 only"
 941         @echo "e            VPN - (standard plus VPN, extra utilities and NTFS support)"
 942         @echo "c            BTgui-VPN - (Ext plus BT gui)"
 943         @echo "d            Nocat-VPN - (BTgui plus VPN plus Nocat)"
 944         @echo "g            Tor-VPN - (BTgui plus VPN plus TOR Project)"
 945         @echo "t            BT-VPN - (BT plus VPN)"
 946         @echo "b            Big-VPN - (Big plus VPN)"
 947         @echo "o            Mega-VPN - (Mega plus VPN plus NOCAT minus NFS)"
 948 ifeq ($(CONFIG_LINUX26),y)
 949         @echo "z            MIPS Release 15F AIO (for routers +8MB flash)"
 950         @echo "i            MiniIPv6 - (IPv6 with no USB support minus CIFS and RIPv1/2)"
 951         @echo "j            MiniVPN - (VPN with no USB support minus CIFS and RIPv1/2)"
 952 endif
 953         @echo "f            Mini - (no USB support minus CIFS and RIPv1/2)"
 954         @echo "v            VPN (no usb) - (VPN with no USB support)" / in K26 + IPv6 support
 955         @echo "m            Max (no usb) - (Max with no USB support)" / in K26 + IPv6 support
 956         @echo "w            SD-VPN (no usb) - (VPN with SD-MOD and no USB support)"
 957 ifeq ($(CONFIG_LINUX26),y)
 958         @echo "r2e          MIPS Release 2 VPN"
 959         @echo "r2c          MIPS Release 2 BTgui-VPN"
 960         @echo "r2d          MIPS Release 2 Nocat-VPN"
 961         @echo "r2g          MIPS Release 2 Tor-VPN"
 962         @echo "r2t          MIPS Release 2 BT-VPN"
 963         @echo "r2b          MIPS Release 2 Big-VPN"
 964         @echo "r2o          MIPS Release 2 Mega-VPN (for routers +8MB flash)"
 965         @echo "r2z          MIPS Release 2 AIO (for routers +8MB flash)"
 966         @echo "r2v          MIPS Release 2 VPN (no usb)"
 967         @echo "r2m          MIPS Release 2 Max (no usb)"
 968         @echo "r2i          MIPS Release 2 MiniIPv6 (for 4MB flash)"
 969         @echo "r2j          MIPS Release 2 MiniVPN (for 4MB flash)"
 970         @echo "r2f          MIPS Release 2 Mini (for netgear)"
 971         @echo "n60e         Linksys E-series build VPN"
 972         @echo "n60c         Linksys E-series build BTGui-VPN"
 973         @echo "n60d         Linksys E-series build BTGui-VPN plus Nocat"
 974         @echo "n60g         Linksys E-series build BTGui-VPN plus TOR Project"
 975         @echo "n60t         Linksys E-series build BT-VPN"
 976         @echo "n60b         Linksys E-series build Big-VPN"
 977         @echo "n60o         Linksys E-series build Mega-VPN"
 978         @echo "n60z         Linksys E-series build AIO"
 979         @echo "n60v         Linksys E-series build IPv6-VPN for E2000"
 980         @echo "n60m         Linksys E-series build Max for E2000"
 981 endif
 982         @echo "..etc..      other build configs"
 983         @echo "clean        -C router clean"
 984         @echo "cleanimage   rm -rf image"
 985         @echo "cleantools   clean btools, mksquashfs"
 986         @echo "cleankernel  -C Linux distclean (but preserves .config)"
 987         @echo "distclean    distclean of Linux & busybox (but preserve .configs)"
 988         @echo "prepk        -C Linux oldconfig dep"
 989
 990 .PHONY: all clean distclean cleanimage cleantools cleankernel prepk what setprofile help
 991 .PHONY: a b c d m nc Makefile allversions tomato_profile.mak