release/src-rt-6.x/linux/linux-2.6/include/asm-arm/arch-omap/io.h

   1 /*
   2  * linux/include/asm-arm/arch-omap/io.h
   3  *
   4  * IO definitions for TI OMAP processors and boards
   5  *
   6  * Copied from linux/include/asm-arm/arch-sa1100/io.h
   7  * Copyright (C) 1997-1999 Russell King
   8  *
   9  * This program is free software; you can redistribute it and/or modify it
  10  * under the terms of the GNU General Public License as published by the
  11  * Free Software Foundation; either version 2 of the License, or (at your
  12  * option) any later version.
  13  *
  14  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  15  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  16  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
  17  * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  18  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  19  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
  20  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  21  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  22  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  23  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  24  *
  25  * You should have received a copy of the GNU General Public License along
  26  * with this program; if not, write to the Free Software Foundation, Inc.,
  27  * 675 Mass Ave, Cambridge, MA 02139, USA.
  28  *
  29  * Modifications:
  30  *  06-12-1997  RMK     Created.
  31  *  07-04-1999  RMK     Major cleanup
  32  */
  33
  34 #ifndef __ASM_ARM_ARCH_IO_H
  35 #define __ASM_ARM_ARCH_IO_H
  36
  37 #include <asm/hardware.h>
  38
  39 #define IO_SPACE_LIMIT 0xffffffff
  40
  41 /*
  42  * We don't actually have real ISA nor PCI buses, but there is so many
  43  * drivers out there that might just work if we fake them...
  44  */
  45 #define __io(a)                 ((void __iomem *)(PCIO_BASE + (a)))
  46 #define __mem_pci(a)            (a)
  47
  48 /*
  49  * ----------------------------------------------------------------------------
  50  * I/O mapping
  51  * ----------------------------------------------------------------------------
  52  */
  53
  54 #define PCIO_BASE       0
  55
  56 #if defined(CONFIG_ARCH_OMAP1)
  57
  58 #define IO_PHYS         0xFFFB0000
  59 #define IO_OFFSET       0x01000000      /* Virtual IO = 0xfefb0000 */
  60 #define IO_SIZE         0x40000
  61 #define IO_VIRT         (IO_PHYS - IO_OFFSET)
  62 #define IO_ADDRESS(pa)  ((pa) - IO_OFFSET)
  63 #define io_p2v(pa)      ((pa) - IO_OFFSET)
  64 #define io_v2p(va)      ((va) + IO_OFFSET)
  65
  66 #elif defined(CONFIG_ARCH_OMAP2)
  67
  68 /* We map both L3 and L4 on OMAP2 */
  69 #define L3_24XX_PHYS    L3_24XX_BASE    /* 0x68000000 */
  70 #define L3_24XX_VIRT    0xf8000000
  71 #define L3_24XX_SIZE    SZ_1M           /* 44kB of 128MB used, want 1MB sect */
  72 #define L4_24XX_PHYS    L4_24XX_BASE    /* 0x48000000 */
  73 #define L4_24XX_VIRT    0xd8000000
  74 #define L4_24XX_SIZE    SZ_1M           /* 1MB of 128MB used, want 1MB sect */
  75 #define IO_OFFSET       0x90000000
  76 #define IO_ADDRESS(pa)  ((pa) + IO_OFFSET)      /* Works for L3 and L4 */
  77 #define io_p2v(pa)      ((pa) + IO_OFFSET)      /* Works for L3 and L4 */
  78 #define io_v2p(va)      ((va) - IO_OFFSET)      /* Works for L3 and L4 */
  79
  80 /* DSP */
  81 #define DSP_MEM_24XX_PHYS       OMAP24XX_DSP_MEM_BASE   /* 0x58000000 */
  82 #define DSP_MEM_24XX_VIRT       0xe0000000
  83 #define DSP_MEM_24XX_SIZE       0x28000
  84 #define DSP_IPI_24XX_PHYS       OMAP24XX_DSP_IPI_BASE   /* 0x59000000 */
  85 #define DSP_IPI_24XX_VIRT       0xe1000000
  86 #define DSP_IPI_24XX_SIZE       SZ_4K
  87 #define DSP_MMU_24XX_PHYS       OMAP24XX_DSP_MMU_BASE   /* 0x5a000000 */
  88 #define DSP_MMU_24XX_VIRT       0xe2000000
  89 #define DSP_MMU_24XX_SIZE       SZ_4K
  90
  91 #endif
  92
  93 #ifndef __ASSEMBLER__
  94
  95 /*
  96  * Functions to access the OMAP IO region
  97  *
  98  * NOTE: - Use omap_read/write[bwl] for physical register addresses
  99  *       - Use __raw_read/write[bwl]() for virtual register addresses
 100  *       - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
 101  *       - DO NOT use hardcoded virtual addresses to allow changing the
 102  *         IO address space again if needed
 103  */
 104 #define omap_readb(a)           (*(volatile unsigned char  *)IO_ADDRESS(a))
 105 #define omap_readw(a)           (*(volatile unsigned short *)IO_ADDRESS(a))
 106 #define omap_readl(a)           (*(volatile unsigned int   *)IO_ADDRESS(a))
 107
 108 #define omap_writeb(v,a)        (*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
 109 #define omap_writew(v,a)        (*(volatile unsigned short *)IO_ADDRESS(a) = (v))
 110 #define omap_writel(v,a)        (*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
 111
 112 /* 16 bit uses LDRH/STRH, base +/- offset_8 */
 113 typedef struct { volatile u16 offset[256]; } __regbase16;
 114 #define __REGV16(vaddr)         ((__regbase16 *)((vaddr)&~0xff)) \
 115                                         ->offset[((vaddr)&0xff)>>1]
 116 #define __REG16(paddr)          __REGV16(io_p2v(paddr))
 117
 118 /* 8/32 bit uses LDR/STR, base +/- offset_12 */
 119 typedef struct { volatile u8 offset[4096]; } __regbase8;
 120 #define __REGV8(vaddr)          ((__regbase8  *)((vaddr)&~4095)) \
 121                                         ->offset[((vaddr)&4095)>>0]
 122 #define __REG8(paddr)           __REGV8(io_p2v(paddr))
 123
 124 typedef struct { volatile u32 offset[4096]; } __regbase32;
 125 #define __REGV32(vaddr)         ((__regbase32 *)((vaddr)&~4095)) \
 126                                         ->offset[((vaddr)&4095)>>2]
 127 #define __REG32(paddr)          __REGV32(io_p2v(paddr))
 128
 129 extern void omap1_map_common_io(void);
 130 extern void omap1_init_common_hw(void);
 131
 132 extern void omap2_map_common_io(void);
 133 extern void omap2_init_common_hw(void);
 134
 135 #else
 136
 137 #define __REG8(paddr)           io_p2v(paddr)
 138 #define __REG16(paddr)          io_p2v(paddr)
 139 #define __REG32(paddr)          io_p2v(paddr)
 140
 141 #endif
 142
 143 #endif