release/src-rt-6.x/linux/linux-2.6/drivers/usb/serial/ti_usb_3410_5052.h

   1 /* vi: ts=8 sw=8
   2  *
   3  * TI 3410/5052 USB Serial Driver Header
   4  *
   5  * Copyright (C) 2004 Texas Instruments
   6  *
   7  * This driver is based on the Linux io_ti driver, which is
   8  *   Copyright (C) 2000-2002 Inside Out Networks
   9  *   Copyright (C) 2001-2002 Greg Kroah-Hartman
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2 of the License, or
  14  * (at your option) any later version.
  15  *
  16  * For questions or problems with this driver, contact Texas Instruments
  17  * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
  18  * Peter Berger <pberger@brimson.com>.
  19  */
  20
  21 #ifndef _TI_3410_5052_H_
  22 #define _TI_3410_5052_H_
  23
  24 /* Configuration ids */
  25 #define TI_BOOT_CONFIG                  1
  26 #define TI_ACTIVE_CONFIG                2
  27
  28 /* Vendor and product ids */
  29 #define TI_VENDOR_ID                    0x0451
  30 #define TI_3410_PRODUCT_ID              0x3410
  31 #define TI_3410_EZ430_ID                0xF430  /* TI ez430 development tool */
  32 #define TI_5052_BOOT_PRODUCT_ID         0x5052  /* no EEPROM, no firmware */
  33 #define TI_5152_BOOT_PRODUCT_ID         0x5152  /* no EEPROM, no firmware */
  34 #define TI_5052_EEPROM_PRODUCT_ID       0x505A  /* EEPROM, no firmware */
  35 #define TI_5052_FIRMWARE_PRODUCT_ID     0x505F  /* firmware is running */
  36
  37 /* Commands */
  38 #define TI_GET_VERSION                  0x01
  39 #define TI_GET_PORT_STATUS              0x02
  40 #define TI_GET_PORT_DEV_INFO            0x03
  41 #define TI_GET_CONFIG                   0x04
  42 #define TI_SET_CONFIG                   0x05
  43 #define TI_OPEN_PORT                    0x06
  44 #define TI_CLOSE_PORT                   0x07
  45 #define TI_START_PORT                   0x08
  46 #define TI_STOP_PORT                    0x09
  47 #define TI_TEST_PORT                    0x0A
  48 #define TI_PURGE_PORT                   0x0B
  49 #define TI_RESET_EXT_DEVICE             0x0C
  50 #define TI_WRITE_DATA                   0x80
  51 #define TI_READ_DATA                    0x81
  52 #define TI_REQ_TYPE_CLASS               0x82
  53
  54 /* Module identifiers */
  55 #define TI_I2C_PORT                     0x01
  56 #define TI_IEEE1284_PORT                0x02
  57 #define TI_UART1_PORT                   0x03
  58 #define TI_UART2_PORT                   0x04
  59 #define TI_RAM_PORT                     0x05
  60
  61 /* Modem status */
  62 #define TI_MSR_DELTA_CTS                0x01
  63 #define TI_MSR_DELTA_DSR                0x02
  64 #define TI_MSR_DELTA_RI                 0x04
  65 #define TI_MSR_DELTA_CD                 0x08
  66 #define TI_MSR_CTS                      0x10
  67 #define TI_MSR_DSR                      0x20
  68 #define TI_MSR_RI                       0x40
  69 #define TI_MSR_CD                       0x80
  70 #define TI_MSR_DELTA_MASK               0x0F
  71 #define TI_MSR_MASK                     0xF0
  72
  73 /* Line status */
  74 #define TI_LSR_OVERRUN_ERROR            0x01
  75 #define TI_LSR_PARITY_ERROR             0x02
  76 #define TI_LSR_FRAMING_ERROR            0x04
  77 #define TI_LSR_BREAK                    0x08
  78 #define TI_LSR_ERROR                    0x0F
  79 #define TI_LSR_RX_FULL                  0x10
  80 #define TI_LSR_TX_EMPTY                 0x20
  81
  82 /* Line control */
  83 #define TI_LCR_BREAK                    0x40
  84
  85 /* Modem control */
  86 #define TI_MCR_LOOP                     0x04
  87 #define TI_MCR_DTR                      0x10
  88 #define TI_MCR_RTS                      0x20
  89
  90 /* Mask settings */
  91 #define TI_UART_ENABLE_RTS_IN           0x0001
  92 #define TI_UART_DISABLE_RTS             0x0002
  93 #define TI_UART_ENABLE_PARITY_CHECKING  0x0008
  94 #define TI_UART_ENABLE_DSR_OUT          0x0010
  95 #define TI_UART_ENABLE_CTS_OUT          0x0020
  96 #define TI_UART_ENABLE_X_OUT            0x0040
  97 #define TI_UART_ENABLE_XA_OUT           0x0080
  98 #define TI_UART_ENABLE_X_IN             0x0100
  99 #define TI_UART_ENABLE_DTR_IN           0x0800
 100 #define TI_UART_DISABLE_DTR             0x1000
 101 #define TI_UART_ENABLE_MS_INTS          0x2000
 102 #define TI_UART_ENABLE_AUTO_START_DMA   0x4000
 103
 104 /* Parity */
 105 #define TI_UART_NO_PARITY               0x00
 106 #define TI_UART_ODD_PARITY              0x01
 107 #define TI_UART_EVEN_PARITY             0x02
 108 #define TI_UART_MARK_PARITY             0x03
 109 #define TI_UART_SPACE_PARITY            0x04
 110
 111 /* Stop bits */
 112 #define TI_UART_1_STOP_BITS             0x00
 113 #define TI_UART_1_5_STOP_BITS           0x01
 114 #define TI_UART_2_STOP_BITS             0x02
 115
 116 /* Bits per character */
 117 #define TI_UART_5_DATA_BITS             0x00
 118 #define TI_UART_6_DATA_BITS             0x01
 119 #define TI_UART_7_DATA_BITS             0x02
 120 #define TI_UART_8_DATA_BITS             0x03
 121
 122 /* 232/485 modes */
 123 #define TI_UART_232                     0x00
 124 #define TI_UART_485_RECEIVER_DISABLED   0x01
 125 #define TI_UART_485_RECEIVER_ENABLED    0x02
 126
 127 /* Pipe transfer mode and timeout */
 128 #define TI_PIPE_MODE_CONTINOUS          0x01
 129 #define TI_PIPE_MODE_MASK               0x03
 130 #define TI_PIPE_TIMEOUT_MASK            0x7C
 131 #define TI_PIPE_TIMEOUT_ENABLE          0x80
 132
 133 /* Config struct */
 134 struct ti_uart_config {
 135         __u16   wBaudRate;
 136         __u16   wFlags;
 137         __u8    bDataBits;
 138         __u8    bParity;
 139         __u8    bStopBits;
 140         char    cXon;
 141         char    cXoff;
 142         __u8    bUartMode;
 143 } __attribute__((packed));
 144
 145 /* Get port status */
 146 struct ti_port_status {
 147         __u8    bCmdCode;
 148         __u8    bModuleId;
 149         __u8    bErrorCode;
 150         __u8    bMSR;
 151         __u8    bLSR;
 152 } __attribute__((packed));
 153
 154 /* Purge modes */
 155 #define TI_PURGE_OUTPUT                 0x00
 156 #define TI_PURGE_INPUT                  0x80
 157
 158 /* Read/Write data */
 159 #define TI_RW_DATA_ADDR_SFR             0x10
 160 #define TI_RW_DATA_ADDR_IDATA           0x20
 161 #define TI_RW_DATA_ADDR_XDATA           0x30
 162 #define TI_RW_DATA_ADDR_CODE            0x40
 163 #define TI_RW_DATA_ADDR_GPIO            0x50
 164 #define TI_RW_DATA_ADDR_I2C             0x60
 165 #define TI_RW_DATA_ADDR_FLASH           0x70
 166 #define TI_RW_DATA_ADDR_DSP             0x80
 167
 168 #define TI_RW_DATA_UNSPECIFIED          0x00
 169 #define TI_RW_DATA_BYTE                 0x01
 170 #define TI_RW_DATA_WORD                 0x02
 171 #define TI_RW_DATA_DOUBLE_WORD          0x04
 172
 173 struct ti_write_data_bytes {
 174         __u8    bAddrType;
 175         __u8    bDataType;
 176         __u8    bDataCounter;
 177         __be16  wBaseAddrHi;
 178         __be16  wBaseAddrLo;
 179         __u8    bData[0];
 180 } __attribute__((packed));
 181
 182 struct ti_read_data_request {
 183         __u8    bAddrType;
 184         __u8    bDataType;
 185         __u8    bDataCounter;
 186         __be16  wBaseAddrHi;
 187         __be16  wBaseAddrLo;
 188 } __attribute__((packed));
 189
 190 struct ti_read_data_bytes {
 191         __u8    bCmdCode;
 192         __u8    bModuleId;
 193         __u8    bErrorCode;
 194         __u8    bData[0];
 195 } __attribute__((packed));
 196
 197 /* Interrupt struct */
 198 struct ti_interrupt {
 199         __u8    bICode;
 200         __u8    bIInfo;
 201 } __attribute__((packed));
 202
 203 /* Interrupt codes */
 204 #define TI_GET_PORT_FROM_CODE(c)        (((c) >> 4) - 3)
 205 #define TI_GET_FUNC_FROM_CODE(c)        ((c) & 0x0f)
 206 #define TI_CODE_HARDWARE_ERROR          0xFF
 207 #define TI_CODE_DATA_ERROR              0x03
 208 #define TI_CODE_MODEM_STATUS            0x04
 209
 210 /* Download firmware max packet size */
 211 #define TI_DOWNLOAD_MAX_PACKET_SIZE     64
 212
 213 /* Firmware image header */
 214 struct ti_firmware_header {
 215         __le16  wLength;
 216         __u8    bCheckSum;
 217 } __attribute__((packed));
 218
 219 /* UART addresses */
 220 #define TI_UART1_BASE_ADDR              0xFFA0  /* UART 1 base address */
 221 #define TI_UART2_BASE_ADDR              0xFFB0  /* UART 2 base address */
 222 #define TI_UART_OFFSET_LCR              0x0002  /* UART MCR register offset */
 223 #define TI_UART_OFFSET_MCR              0x0004  /* UART MCR register offset */
 224
 225 #endif /* _TI_3410_5052_H_ */