release/src-rt-6.x/linux/linux-2.6/drivers/usb/host/ehci-fsl.c

   1 /*
   2  * (C) Copyright David Brownell 2000-2002
   3  * Copyright (c) 2005 MontaVista Software
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of the GNU General Public License as published by the
   7  * Free Software Foundation; either version 2 of the License, or (at your
   8  * option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful, but
  11  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  12  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  13  * for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software Foundation,
  17  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18  *
  19  * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
  20  * by Hunter Wu.
  21  */
  22
  23 #include <linux/platform_device.h>
  24 #include <linux/fsl_devices.h>
  25
  26 #include "ehci-fsl.h"
  27
  28 /* FIXME: Power Managment is un-ported so temporarily disable it */
  29 #undef CONFIG_PM
  30
  31 /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
  32
  33 /* configure so an HC device and id are always provided */
  34 /* always called with process context; sleeping is OK */
  35
  36 /**
  37  * usb_hcd_fsl_probe - initialize FSL-based HCDs
  38  * @drvier: Driver to be used for this HCD
  39  * @pdev: USB Host Controller being probed
  40  * Context: !in_interrupt()
  41  *
  42  * Allocates basic resources for this USB host controller.
  43  *
  44  */
  45 int usb_hcd_fsl_probe(const struct hc_driver *driver,
  46                       struct platform_device *pdev)
  47 {
  48         struct fsl_usb2_platform_data *pdata;
  49         struct usb_hcd *hcd;
  50         struct resource *res;
  51         int irq;
  52         int retval;
  53         unsigned int temp;
  54
  55         pr_debug("initializing FSL-SOC USB Controller\n");
  56
  57         /* Need platform data for setup */
  58         pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
  59         if (!pdata) {
  60                 dev_err(&pdev->dev,
  61                         "No platform data for %s.\n", pdev->dev.bus_id);
  62                 return -ENODEV;
  63         }
  64
  65         /*
  66          * This is a host mode driver, verify that we're supposed to be
  67          * in host mode.
  68          */
  69         if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
  70               (pdata->operating_mode == FSL_USB2_MPH_HOST) ||
  71               (pdata->operating_mode == FSL_USB2_DR_OTG))) {
  72                 dev_err(&pdev->dev,
  73                         "Non Host Mode configured for %s. Wrong driver linked.\n",
  74                         pdev->dev.bus_id);
  75                 return -ENODEV;
  76         }
  77
  78         res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
  79         if (!res) {
  80                 dev_err(&pdev->dev,
  81                         "Found HC with no IRQ. Check %s setup!\n",
  82                         pdev->dev.bus_id);
  83                 return -ENODEV;
  84         }
  85         irq = res->start;
  86
  87         hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id);
  88         if (!hcd) {
  89                 retval = -ENOMEM;
  90                 goto err1;
  91         }
  92
  93         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  94         if (!res) {
  95                 dev_err(&pdev->dev,
  96                         "Found HC with no register addr. Check %s setup!\n",
  97                         pdev->dev.bus_id);
  98                 retval = -ENODEV;
  99                 goto err2;
 100         }
 101         hcd->rsrc_start = res->start;
 102         hcd->rsrc_len = res->end - res->start + 1;
 103         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
 104                                 driver->description)) {
 105                 dev_dbg(&pdev->dev, "controller already in use\n");
 106                 retval = -EBUSY;
 107                 goto err2;
 108         }
 109         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 110
 111         if (hcd->regs == NULL) {
 112                 dev_dbg(&pdev->dev, "error mapping memory\n");
 113                 retval = -EFAULT;
 114                 goto err3;
 115         }
 116
 117         /* Enable USB controller */
 118         temp = in_be32(hcd->regs + 0x500);
 119         out_be32(hcd->regs + 0x500, temp | 0x4);
 120
 121         /* Set to Host mode */
 122         temp = in_le32(hcd->regs + 0x1a8);
 123         out_le32(hcd->regs + 0x1a8, temp | 0x3);
 124
 125         retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
 126         if (retval != 0)
 127                 goto err4;
 128         return retval;
 129
 130       err4:
 131         iounmap(hcd->regs);
 132       err3:
 133         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 134       err2:
 135         usb_put_hcd(hcd);
 136       err1:
 137         dev_err(&pdev->dev, "init %s fail, %d\n", pdev->dev.bus_id, retval);
 138         return retval;
 139 }
 140
 141 /* may be called without controller electrically present */
 142 /* may be called with controller, bus, and devices active */
 143
 144 /**
 145  * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
 146  * @dev: USB Host Controller being removed
 147  * Context: !in_interrupt()
 148  *
 149  * Reverses the effect of usb_hcd_fsl_probe().
 150  *
 151  */
 152 void usb_hcd_fsl_remove(struct usb_hcd *hcd, struct platform_device *pdev)
 153 {
 154         usb_remove_hcd(hcd);
 155         iounmap(hcd->regs);
 156         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 157         usb_put_hcd(hcd);
 158 }
 159
 160 static void mpc83xx_setup_phy(struct ehci_hcd *ehci,
 161                               enum fsl_usb2_phy_modes phy_mode,
 162                               unsigned int port_offset)
 163 {
 164         u32 portsc = 0;
 165         switch (phy_mode) {
 166         case FSL_USB2_PHY_ULPI:
 167                 portsc |= PORT_PTS_ULPI;
 168                 break;
 169         case FSL_USB2_PHY_SERIAL:
 170                 portsc |= PORT_PTS_SERIAL;
 171                 break;
 172         case FSL_USB2_PHY_UTMI_WIDE:
 173                 portsc |= PORT_PTS_PTW;
 174                 /* fall through */
 175         case FSL_USB2_PHY_UTMI:
 176                 portsc |= PORT_PTS_UTMI;
 177                 break;
 178         case FSL_USB2_PHY_NONE:
 179                 break;
 180         }
 181         ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
 182 }
 183
 184 static void mpc83xx_usb_setup(struct usb_hcd *hcd)
 185 {
 186         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 187         struct fsl_usb2_platform_data *pdata;
 188         void __iomem *non_ehci = hcd->regs;
 189         u32 temp;
 190
 191         pdata =
 192             (struct fsl_usb2_platform_data *)hcd->self.controller->
 193             platform_data;
 194         /* Enable PHY interface in the control reg. */
 195         temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);
 196         out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | 0x00000004);
 197         out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0000001b);
 198
 199 #if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
 200         /*
 201          * Turn on cache snooping hardware, since some PowerPC platforms
 202          * wholly rely on hardware to deal with cache coherent
 203          */
 204
 205         /* Setup Snooping for all the 4GB space */
 206         /* SNOOP1 starts from 0x0, size 2G */
 207         out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
 208         /* SNOOP2 starts from 0x80000000, size 2G */
 209         out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
 210 #endif
 211
 212         if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
 213                         (pdata->operating_mode == FSL_USB2_DR_OTG))
 214                 mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);
 215
 216         if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
 217                 unsigned int chip, rev, svr;
 218
 219                 svr = mfspr(SPRN_SVR);
 220                 chip = svr >> 16;
 221                 rev = (svr >> 4) & 0xf;
 222
 223                 /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
 224                 if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
 225                         ehci->has_fsl_port_bug = 1;
 226
 227                 if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
 228                         mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);
 229                 if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
 230                         mpc83xx_setup_phy(ehci, pdata->phy_mode, 1);
 231         }
 232
 233         /* put controller in host mode. */
 234         ehci_writel(ehci, 0x00000003, non_ehci + FSL_SOC_USB_USBMODE);
 235         out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
 236         out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
 237         out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
 238 }
 239
 240 /* called after powerup, by probe or system-pm "wakeup" */
 241 static int ehci_fsl_reinit(struct ehci_hcd *ehci)
 242 {
 243         mpc83xx_usb_setup(ehci_to_hcd(ehci));
 244         ehci_port_power(ehci, 0);
 245
 246         return 0;
 247 }
 248
 249 /* called during probe() after chip reset completes */
 250 static int ehci_fsl_setup(struct usb_hcd *hcd)
 251 {
 252         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 253         int retval;
 254
 255         /* EHCI registers start at offset 0x100 */
 256         ehci->caps = hcd->regs + 0x100;
 257         ehci->regs = hcd->regs + 0x100 +
 258             HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
 259         dbg_hcs_params(ehci, "reset");
 260         dbg_hcc_params(ehci, "reset");
 261
 262         /* cache this readonly data; minimize chip reads */
 263         ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
 264
 265         retval = ehci_halt(ehci);
 266         if (retval)
 267                 return retval;
 268
 269         /* data structure init */
 270         retval = ehci_init(hcd);
 271         if (retval)
 272                 return retval;
 273
 274         hcd->has_tt = 1;
 275
 276         ehci->sbrn = 0x20;
 277
 278         ehci_reset(ehci);
 279
 280         retval = ehci_fsl_reinit(ehci);
 281         return retval;
 282 }
 283
 284 static const struct hc_driver ehci_fsl_hc_driver = {
 285         .description = hcd_name,
 286         .product_desc = "Freescale On-Chip EHCI Host Controller",
 287         .hcd_priv_size = sizeof(struct ehci_hcd),
 288
 289         /*
 290          * generic hardware linkage
 291          */
 292         .irq = ehci_irq,
 293         .flags = HCD_USB2,
 294
 295         /*
 296          * basic lifecycle operations
 297          */
 298         .reset = ehci_fsl_setup,
 299         .start = ehci_run,
 300         .stop = ehci_stop,
 301         .shutdown = ehci_shutdown,
 302
 303         /*
 304          * managing i/o requests and associated device resources
 305          */
 306         .urb_enqueue = ehci_urb_enqueue,
 307         .urb_dequeue = ehci_urb_dequeue,
 308         .endpoint_disable = ehci_endpoint_disable,
 309
 310         /*
 311          * scheduling support
 312          */
 313         .get_frame_number = ehci_get_frame,
 314
 315         /*
 316          * root hub support
 317          */
 318         .hub_status_data = ehci_hub_status_data,
 319         .hub_control = ehci_hub_control,
 320         .bus_suspend = ehci_bus_suspend,
 321         .bus_resume = ehci_bus_resume,
 322         .relinquish_port = ehci_relinquish_port,
 323         .port_handed_over = ehci_port_handed_over,
 324 };
 325
 326 static int ehci_fsl_drv_probe(struct platform_device *pdev)
 327 {
 328         if (usb_disabled())
 329                 return -ENODEV;
 330
 331         return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
 332 }
 333
 334 static int ehci_fsl_drv_remove(struct platform_device *pdev)
 335 {
 336         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 337
 338         usb_hcd_fsl_remove(hcd, pdev);
 339
 340         return 0;
 341 }
 342
 343 MODULE_ALIAS("fsl-ehci");
 344
 345 static struct platform_driver ehci_fsl_driver = {
 346         .probe = ehci_fsl_drv_probe,
 347         .remove = ehci_fsl_drv_remove,
 348         .shutdown = usb_hcd_platform_shutdown,
 349         .driver = {
 350                    .name = "fsl-ehci",
 351                    },
 352 };