RT-AC66 3.0.0.4.374.130 core
[tomato.git] / release / src-rt-6.x / linux / linux-2.6 / drivers / scsi / lpfc / lpfc.h
blob82e8f90c46178472c3cb24243250dea996cdcd46
1 /*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
3 * Fibre Channel Host Bus Adapters. *
4 * Copyright (C) 2004-2007 Emulex. All rights reserved. *
5 * EMULEX and SLI are trademarks of Emulex. *
6 * www.emulex.com *
7 * Portions Copyright (C) 2004-2005 Christoph Hellwig *
8 * *
9 * This program is free software; you can redistribute it and/or *
10 * modify it under the terms of version 2 of the GNU General *
11 * Public License as published by the Free Software Foundation. *
12 * This program is distributed in the hope that it will be useful. *
13 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
14 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
15 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
16 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
17 * TO BE LEGALLY INVALID. See the GNU General Public License for *
18 * more details, a copy of which can be found in the file COPYING *
19 * included with this package. *
20 *******************************************************************/
22 struct lpfc_sli2_slim;
25 #define LPFC_MAX_TARGET 256 /* max number of targets supported */
26 #define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els
27 requests */
28 #define LPFC_MAX_NS_RETRY 3 /* Number of retry attempts to contact
29 the NameServer before giving up. */
30 #define LPFC_CMD_PER_LUN 3 /* max outstanding cmds per lun */
31 #define LPFC_SG_SEG_CNT 64 /* sg element count per scsi cmnd */
32 #define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */
33 #define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */
35 /* Define macros for 64 bit support */
36 #define putPaddrLow(addr) ((uint32_t) (0xffffffff & (u64)(addr)))
37 #define putPaddrHigh(addr) ((uint32_t) (0xffffffff & (((u64)(addr))>>32)))
38 #define getPaddr(high, low) ((dma_addr_t)( \
39 (( (u64)(high)<<16 ) << 16)|( (u64)(low))))
40 /* Provide maximum configuration definitions. */
41 #define LPFC_DRVR_TIMEOUT 16 /* driver iocb timeout value in sec */
42 #define FC_MAX_ADPTMSG 64
44 #define MAX_HBAEVT 32
46 enum lpfc_polling_flags {
47 ENABLE_FCP_RING_POLLING = 0x1,
48 DISABLE_FCP_RING_INT = 0x2
51 /* Provide DMA memory definitions the driver uses per port instance. */
52 struct lpfc_dmabuf {
53 struct list_head list;
54 void *virt; /* virtual address ptr */
55 dma_addr_t phys; /* mapped address */
58 struct lpfc_dma_pool {
59 struct lpfc_dmabuf *elements;
60 uint32_t max_count;
61 uint32_t current_count;
64 /* Priority bit. Set value to exceed low water mark in lpfc_mem. */
65 #define MEM_PRI 0x100
68 /****************************************************************************/
69 /* Device VPD save area */
70 /****************************************************************************/
71 typedef struct lpfc_vpd {
72 uint32_t status; /* vpd status value */
73 uint32_t length; /* number of bytes actually returned */
74 struct {
75 uint32_t rsvd1; /* Revision numbers */
76 uint32_t biuRev;
77 uint32_t smRev;
78 uint32_t smFwRev;
79 uint32_t endecRev;
80 uint16_t rBit;
81 uint8_t fcphHigh;
82 uint8_t fcphLow;
83 uint8_t feaLevelHigh;
84 uint8_t feaLevelLow;
85 uint32_t postKernRev;
86 uint32_t opFwRev;
87 uint8_t opFwName[16];
88 uint32_t sli1FwRev;
89 uint8_t sli1FwName[16];
90 uint32_t sli2FwRev;
91 uint8_t sli2FwName[16];
92 } rev;
93 } lpfc_vpd_t;
95 struct lpfc_scsi_buf;
99 * lpfc stat counters
101 struct lpfc_stats {
102 /* Statistics for ELS commands */
103 uint32_t elsLogiCol;
104 uint32_t elsRetryExceeded;
105 uint32_t elsXmitRetry;
106 uint32_t elsDelayRetry;
107 uint32_t elsRcvDrop;
108 uint32_t elsRcvFrame;
109 uint32_t elsRcvRSCN;
110 uint32_t elsRcvRNID;
111 uint32_t elsRcvFARP;
112 uint32_t elsRcvFARPR;
113 uint32_t elsRcvFLOGI;
114 uint32_t elsRcvPLOGI;
115 uint32_t elsRcvADISC;
116 uint32_t elsRcvPDISC;
117 uint32_t elsRcvFAN;
118 uint32_t elsRcvLOGO;
119 uint32_t elsRcvPRLO;
120 uint32_t elsRcvPRLI;
121 uint32_t elsRcvLIRR;
122 uint32_t elsRcvRPS;
123 uint32_t elsRcvRPL;
124 uint32_t elsXmitFLOGI;
125 uint32_t elsXmitPLOGI;
126 uint32_t elsXmitPRLI;
127 uint32_t elsXmitADISC;
128 uint32_t elsXmitLOGO;
129 uint32_t elsXmitSCR;
130 uint32_t elsXmitRNID;
131 uint32_t elsXmitFARP;
132 uint32_t elsXmitFARPR;
133 uint32_t elsXmitACC;
134 uint32_t elsXmitLSRJT;
136 uint32_t frameRcvBcast;
137 uint32_t frameRcvMulti;
138 uint32_t strayXmitCmpl;
139 uint32_t frameXmitDelay;
140 uint32_t xriCmdCmpl;
141 uint32_t xriStatErr;
142 uint32_t LinkUp;
143 uint32_t LinkDown;
144 uint32_t LinkMultiEvent;
145 uint32_t NoRcvBuf;
146 uint32_t fcpCmd;
147 uint32_t fcpCmpl;
148 uint32_t fcpRspErr;
149 uint32_t fcpRemoteStop;
150 uint32_t fcpPortRjt;
151 uint32_t fcpPortBusy;
152 uint32_t fcpError;
153 uint32_t fcpLocalErr;
156 enum sysfs_mbox_state {
157 SMBOX_IDLE,
158 SMBOX_WRITING,
159 SMBOX_READING
162 struct lpfc_sysfs_mbox {
163 enum sysfs_mbox_state state;
164 size_t offset;
165 struct lpfcMboxq * mbox;
168 struct lpfc_hba {
169 struct lpfc_sli sli;
170 struct lpfc_sli2_slim *slim2p;
171 dma_addr_t slim2p_mapping;
172 uint16_t pci_cfg_value;
174 int32_t hba_state;
176 #define LPFC_STATE_UNKNOWN 0 /* HBA state is unknown */
177 #define LPFC_WARM_START 1 /* HBA state after selective reset */
178 #define LPFC_INIT_START 2 /* Initial state after board reset */
179 #define LPFC_INIT_MBX_CMDS 3 /* Initialize HBA with mbox commands */
180 #define LPFC_LINK_DOWN 4 /* HBA initialized, link is down */
181 #define LPFC_LINK_UP 5 /* Link is up - issue READ_LA */
182 #define LPFC_LOCAL_CFG_LINK 6 /* local NPORT Id configured */
183 #define LPFC_FLOGI 7 /* FLOGI sent to Fabric */
184 #define LPFC_FABRIC_CFG_LINK 8 /* Fabric assigned NPORT Id
185 configured */
186 #define LPFC_NS_REG 9 /* Register with NameServer */
187 #define LPFC_NS_QRY 10 /* Query NameServer for NPort ID list */
188 #define LPFC_BUILD_DISC_LIST 11 /* Build ADISC and PLOGI lists for
189 * device authentication / discovery */
190 #define LPFC_DISC_AUTH 12 /* Processing ADISC list */
191 #define LPFC_CLEAR_LA 13 /* authentication cmplt - issue
192 CLEAR_LA */
193 #define LPFC_HBA_READY 32
194 #define LPFC_HBA_ERROR -1
196 int32_t stopped; /* HBA has not been restarted since last ERATT */
197 uint8_t fc_linkspeed; /* Link speed after last READ_LA */
199 uint32_t fc_eventTag; /* event tag for link attention */
200 uint32_t fc_prli_sent; /* cntr for outstanding PRLIs */
202 uint32_t num_disc_nodes; /*in addition to hba_state */
204 struct timer_list fc_estabtmo; /* link establishment timer */
205 struct timer_list fc_disctmo; /* Discovery rescue timer */
206 struct timer_list fc_fdmitmo; /* fdmi timer */
207 /* These fields used to be binfo */
208 struct lpfc_name fc_nodename; /* fc nodename */
209 struct lpfc_name fc_portname; /* fc portname */
210 uint32_t fc_pref_DID; /* preferred D_ID */
211 uint8_t fc_pref_ALPA; /* preferred AL_PA */
212 uint32_t fc_edtov; /* E_D_TOV timer value */
213 uint32_t fc_arbtov; /* ARB_TOV timer value */
214 uint32_t fc_ratov; /* R_A_TOV timer value */
215 uint32_t fc_rttov; /* R_T_TOV timer value */
216 uint32_t fc_altov; /* AL_TOV timer value */
217 uint32_t fc_crtov; /* C_R_TOV timer value */
218 uint32_t fc_citov; /* C_I_TOV timer value */
219 uint32_t fc_myDID; /* fibre channel S_ID */
220 uint32_t fc_prevDID; /* previous fibre channel S_ID */
222 struct serv_parm fc_sparam; /* buffer for our service parameters */
223 struct serv_parm fc_fabparam; /* fabric service parameters buffer */
224 uint8_t alpa_map[128]; /* AL_PA map from READ_LA */
226 uint8_t fc_ns_retry; /* retries for fabric nameserver */
227 uint32_t fc_nlp_cnt; /* outstanding NODELIST requests */
228 uint32_t fc_rscn_id_cnt; /* count of RSCNs payloads in list */
229 struct lpfc_dmabuf *fc_rscn_id_list[FC_MAX_HOLD_RSCN];
230 uint32_t lmt;
231 uint32_t fc_flag; /* FC flags */
232 #define FC_PT2PT 0x1 /* pt2pt with no fabric */
233 #define FC_PT2PT_PLOGI 0x2 /* pt2pt initiate PLOGI */
234 #define FC_DISC_TMO 0x4 /* Discovery timer running */
235 #define FC_PUBLIC_LOOP 0x8 /* Public loop */
236 #define FC_LBIT 0x10 /* LOGIN bit in loopinit set */
237 #define FC_RSCN_MODE 0x20 /* RSCN cmd rcv'ed */
238 #define FC_NLP_MORE 0x40 /* More node to process in node tbl */
239 #define FC_OFFLINE_MODE 0x80 /* Interface is offline for diag */
240 #define FC_FABRIC 0x100 /* We are fabric attached */
241 #define FC_ESTABLISH_LINK 0x200 /* Reestablish Link */
242 #define FC_RSCN_DISCOVERY 0x400 /* Authenticate all devices after RSCN*/
243 #define FC_BLOCK_MGMT_IO 0x800 /* Don't allow mgmt mbx or iocb cmds */
244 #define FC_LOADING 0x1000 /* HBA in process of loading drvr */
245 #define FC_UNLOADING 0x2000 /* HBA in process of unloading drvr */
246 #define FC_SCSI_SCAN_TMO 0x4000 /* scsi scan timer running */
247 #define FC_ABORT_DISCOVERY 0x8000 /* we want to abort discovery */
248 #define FC_NDISC_ACTIVE 0x10000 /* NPort discovery active */
249 #define FC_BYPASSED_MODE 0x20000 /* NPort is in bypassed mode */
250 #define FC_LOOPBACK_MODE 0x40000 /* NPort is in Loopback mode */
251 /* This flag is set while issuing */
252 /* INIT_LINK mailbox command */
253 #define FC_IGNORE_ERATT 0x80000 /* intr handler should ignore ERATT */
255 uint32_t fc_topology; /* link topology, from LINK INIT */
257 struct lpfc_stats fc_stat;
259 struct list_head fc_nodes;
261 /* Keep counters for the number of entries in each list. */
262 uint16_t fc_plogi_cnt;
263 uint16_t fc_adisc_cnt;
264 uint16_t fc_reglogin_cnt;
265 uint16_t fc_prli_cnt;
266 uint16_t fc_unmap_cnt;
267 uint16_t fc_map_cnt;
268 uint16_t fc_npr_cnt;
269 uint16_t fc_unused_cnt;
270 struct lpfc_nodelist fc_fcpnodev; /* nodelist entry for no device */
271 uint32_t nport_event_cnt; /* timestamp for nlplist entry */
273 uint32_t wwnn[2];
274 uint32_t RandomData[7];
276 uint32_t cfg_log_verbose;
277 uint32_t cfg_lun_queue_depth;
278 uint32_t cfg_nodev_tmo;
279 uint32_t cfg_devloss_tmo;
280 uint32_t cfg_hba_queue_depth;
281 uint32_t cfg_fcp_class;
282 uint32_t cfg_use_adisc;
283 uint32_t cfg_ack0;
284 uint32_t cfg_topology;
285 uint32_t cfg_scan_down;
286 uint32_t cfg_link_speed;
287 uint32_t cfg_cr_delay;
288 uint32_t cfg_cr_count;
289 uint32_t cfg_multi_ring_support;
290 uint32_t cfg_multi_ring_rctl;
291 uint32_t cfg_multi_ring_type;
292 uint32_t cfg_fdmi_on;
293 uint32_t cfg_discovery_threads;
294 uint32_t cfg_max_luns;
295 uint32_t cfg_poll;
296 uint32_t cfg_poll_tmo;
297 uint32_t cfg_use_msi;
298 uint32_t cfg_sg_seg_cnt;
299 uint32_t cfg_sg_dma_buf_size;
300 uint64_t cfg_soft_wwnn;
301 uint64_t cfg_soft_wwpn;
303 uint32_t dev_loss_tmo_changed;
305 lpfc_vpd_t vpd; /* vital product data */
307 struct Scsi_Host *host;
308 struct pci_dev *pcidev;
309 struct list_head work_list;
310 uint32_t work_ha; /* Host Attention Bits for WT */
311 uint32_t work_ha_mask; /* HA Bits owned by WT */
312 uint32_t work_hs; /* HS stored in case of ERRAT */
313 uint32_t work_status[2]; /* Extra status from SLIM */
314 uint32_t work_hba_events; /* Timeout to be handled */
315 #define WORKER_DISC_TMO 0x1 /* Discovery timeout */
316 #define WORKER_ELS_TMO 0x2 /* ELS timeout */
317 #define WORKER_MBOX_TMO 0x4 /* MBOX timeout */
318 #define WORKER_FDMI_TMO 0x8 /* FDMI timeout */
320 wait_queue_head_t *work_wait;
321 struct task_struct *worker_thread;
323 unsigned long pci_bar0_map; /* Physical address for PCI BAR0 */
324 unsigned long pci_bar2_map; /* Physical address for PCI BAR2 */
325 void __iomem *slim_memmap_p; /* Kernel memory mapped address for
326 PCI BAR0 */
327 void __iomem *ctrl_regs_memmap_p;/* Kernel memory mapped address for
328 PCI BAR2 */
330 void __iomem *MBslimaddr; /* virtual address for mbox cmds */
331 void __iomem *HAregaddr; /* virtual address for host attn reg */
332 void __iomem *CAregaddr; /* virtual address for chip attn reg */
333 void __iomem *HSregaddr; /* virtual address for host status
334 reg */
335 void __iomem *HCregaddr; /* virtual address for host ctl reg */
337 int brd_no; /* FC board number */
339 char SerialNumber[32]; /* adapter Serial Number */
340 char OptionROMVersion[32]; /* adapter BIOS / Fcode version */
341 char ModelDesc[256]; /* Model Description */
342 char ModelName[80]; /* Model Name */
343 char ProgramType[256]; /* Program Type */
344 char Port[20]; /* Port No */
345 uint8_t vpd_flag; /* VPD data flag */
347 #define VPD_MODEL_DESC 0x1 /* valid vpd model description */
348 #define VPD_MODEL_NAME 0x2 /* valid vpd model name */
349 #define VPD_PROGRAM_TYPE 0x4 /* valid vpd program type */
350 #define VPD_PORT 0x8 /* valid vpd port data */
351 #define VPD_MASK 0xf /* mask for any vpd data */
353 uint8_t soft_wwn_enable;
355 struct timer_list fcp_poll_timer;
356 struct timer_list els_tmofunc;
359 * stat counters
361 uint64_t fc4InputRequests;
362 uint64_t fc4OutputRequests;
363 uint64_t fc4ControlRequests;
365 struct lpfc_sysfs_mbox sysfs_mbox;
367 /* fastpath list. */
368 spinlock_t scsi_buf_list_lock;
369 struct list_head lpfc_scsi_buf_list;
370 uint32_t total_scsi_bufs;
371 struct list_head lpfc_iocb_list;
372 uint32_t total_iocbq_bufs;
374 /* pci_mem_pools */
375 struct pci_pool *lpfc_scsi_dma_buf_pool;
376 struct pci_pool *lpfc_mbuf_pool;
377 struct lpfc_dma_pool lpfc_mbuf_safety_pool;
379 mempool_t *mbox_mem_pool;
380 mempool_t *nlp_mem_pool;
382 struct fc_host_statistics link_stats;
385 static inline void
386 lpfc_set_loopback_flag(struct lpfc_hba *phba) {
387 if (phba->cfg_topology == FLAGS_LOCAL_LB)
388 phba->fc_flag |= FC_LOOPBACK_MODE;
389 else
390 phba->fc_flag &= ~FC_LOOPBACK_MODE;
393 struct rnidrsp {
394 void *buf;
395 uint32_t uniqueid;
396 struct list_head list;
397 uint32_t data;
400 #define FC_REG_DUMP_EVENT 0x10 /* Register for Dump events */