?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
RT-AC66 3.0.0.4.374.130 core
[tomato.git] / release / src-rt-6.x / linux / linux-2.6 / drivers / net / eexpress.c
blob7934ea37f9442e55a16e37a02deb360a2cc12253
1 /* Intel EtherExpress 16 device driver for Linux
2 *
3 * Written by John Sullivan, 1995
4 * based on original code by Donald Becker, with changes by
5 * Alan Cox and Pauline Middelink.
6 *
7 * Support for 8-bit mode by Zoltan Szilagyi <zoltans@cs.arizona.edu>
8 *
9 * Many modifications, and currently maintained, by
10 * Philip Blundell <philb@gnu.org>
11 * Added the Compaq LTE Alan Cox <alan@redhat.com>
12 * Added MCA support Adam Fritzler <mid@auk.cx>
13 *
14 * Note - this driver is experimental still - it has problems on faster
15 * machines. Someone needs to sit down and go through it line by line with
16 * a databook...
17 */
18
19 /* The EtherExpress 16 is a fairly simple card, based on a shared-memory
20 * design using the i82586 Ethernet coprocessor. It bears no relationship,
21 * as far as I know, to the similarly-named "EtherExpress Pro" range.
22 *
23 * Historically, Linux support for these cards has been very bad. However,
24 * things seem to be getting better slowly.
25 */
26
27 /* If your card is confused about what sort of interface it has (eg it
28 * persistently reports "10baseT" when none is fitted), running 'SOFTSET /BART'
29 * or 'SOFTSET /LISA' from DOS seems to help.
30 */
31
32 /* Here's the scoop on memory mapping.
33 *
34 * There are three ways to access EtherExpress card memory: either using the
35 * shared-memory mapping, or using PIO through the dataport, or using PIO
36 * through the "shadow memory" ports.
37 *
38 * The shadow memory system works by having the card map some of its memory
39 * as follows:
40 *
41 * (the low five bits of the SMPTR are ignored)
42 *
43 * base+0x4000..400f memory at SMPTR+0..15
44 * base+0x8000..800f memory at SMPTR+16..31
45 * base+0xc000..c007 dubious stuff (memory at SMPTR+16..23 apparently)
46 * base+0xc008..c00f memory at 0x0008..0x000f
47 *
48 * This last set (the one at c008) is particularly handy because the SCB
49 * lives at 0x0008. So that set of ports gives us easy random access to data
50 * in the SCB without having to mess around setting up pointers and the like.
51 * We always use this method to access the SCB (via the scb_xx() functions).
52 *
53 * Dataport access works by aiming the appropriate (read or write) pointer
54 * at the first address you're interested in, and then reading or writing from
55 * the dataport. The pointers auto-increment after each transfer. We use
56 * this for data transfer.
57 *
58 * We don't use the shared-memory system because it allegedly doesn't work on
59 * all cards, and because it's a bit more prone to go wrong (it's one more
60 * thing to configure...).
61 */
62
63 /* Known bugs:
64 *
65 * - The card seems to want to give us two interrupts every time something
66 * happens, where just one would be better.
67 */
68
69 /*
70 *
71 * Note by Zoltan Szilagyi 10-12-96:
72 *
73 * I've succeeded in eliminating the "CU wedged" messages, and hence the
74 * lockups, which were only occurring with cards running in 8-bit mode ("force
75 * 8-bit operation" in Intel's SoftSet utility). This version of the driver
76 * sets the 82586 and the ASIC to 8-bit mode at startup; it also stops the
77 * CU before submitting a packet for transmission, and then restarts it as soon
78 * as the process of handing the packet is complete. This is definitely an
79 * unnecessary slowdown if the card is running in 16-bit mode; therefore one
80 * should detect 16-bit vs 8-bit mode from the EEPROM settings and act
81 * accordingly. In 8-bit mode with this bugfix I'm getting about 150 K/s for
82 * ftp's, which is significantly better than I get in DOS, so the overhead of
83 * stopping and restarting the CU with each transmit is not prohibitive in
84 * practice.
85 *
86 * Update by David Woodhouse 11/5/99:
87 *
88 * I've seen "CU wedged" messages in 16-bit mode, on the Alpha architecture.
89 * I assume that this is because 16-bit accesses are actually handled as two
90 * 8-bit accesses.
91 */
92
93 #ifdef __alpha__
94 #define LOCKUP16 1
95 #endif
96 #ifndef LOCKUP16
97 #define LOCKUP16 0
98 #endif
99
100 #include <linux/module.h>
101 #include <linux/kernel.h>
102 #include <linux/types.h>
103 #include <linux/fcntl.h>
104 #include <linux/interrupt.h>
105 #include <linux/ioport.h>
106 #include <linux/string.h>
107 #include <linux/in.h>
108 #include <linux/delay.h>
109 #include <linux/errno.h>
110 #include <linux/init.h>
111 #include <linux/netdevice.h>
112 #include <linux/etherdevice.h>
113 #include <linux/skbuff.h>
114 #include <linux/slab.h>
115 #include <linux/mca-legacy.h>
116 #include <linux/spinlock.h>
117 #include <linux/bitops.h>
118 #include <linux/jiffies.h>
119
120 #include <asm/system.h>
121 #include <asm/io.h>
122 #include <asm/irq.h>
123
124 #ifndef NET_DEBUG
125 #define NET_DEBUG 4
126 #endif
127
128 #include "eexpress.h"
129
130 #define EEXP_IO_EXTENT 16
131
132 /*
133 * Private data declarations
134 */
135
136 struct net_local
137 {
138 struct net_device_stats stats;
139 unsigned long last_tx; /* jiffies when last transmit started */
140 unsigned long init_time; /* jiffies when eexp_hw_init586 called */
141 unsigned short rx_first; /* first rx buf, same as RX_BUF_START */
142 unsigned short rx_last; /* last rx buf */
143 unsigned short rx_ptr; /* first rx buf to look at */
144 unsigned short tx_head; /* next free tx buf */
145 unsigned short tx_reap; /* first in-use tx buf */
146 unsigned short tx_tail; /* previous tx buf to tx_head */
147 unsigned short tx_link; /* last known-executing tx buf */
148 unsigned short last_tx_restart; /* set to tx_link when we
149 restart the CU */
150 unsigned char started;
151 unsigned short rx_buf_start;
152 unsigned short rx_buf_end;
153 unsigned short num_tx_bufs;
154 unsigned short num_rx_bufs;
155 unsigned char width; /* 0 for 16bit, 1 for 8bit */
156 unsigned char was_promisc;
157 unsigned char old_mc_count;
158 spinlock_t lock;
159 };
160
161 /* This is the code and data that is downloaded to the EtherExpress card's
162 * memory at boot time.
163 */
164
165 static unsigned short start_code[] = {
166 /* 0x0000 */
167 0x0001, /* ISCP: busy - cleared after reset */
168 0x0008,0x0000,0x0000, /* offset,address (lo,hi) of SCB */
169
170 0x0000,0x0000, /* SCB: status, commands */
171 0x0000,0x0000, /* links to first command block,
172 first receive descriptor */
173 0x0000,0x0000, /* CRC error, alignment error counts */
174 0x0000,0x0000, /* out of resources, overrun error counts */
175
176 0x0000,0x0000, /* pad */
177 0x0000,0x0000,
178
179 /* 0x20 -- start of 82586 CU program */
180 #define CONF_LINK 0x20
181 0x0000,Cmd_Config,
182 0x0032, /* link to next command */
183 0x080c, /* 12 bytes follow : fifo threshold=8 */
184 0x2e40, /* don't rx bad frames
185 * SRDY/ARDY => ext. sync. : preamble len=8
186 * take addresses from data buffers
187 * 6 bytes/address
188 */
189 0x6000, /* default backoff method & priority
190 * interframe spacing = 0x60 */
191 0xf200, /* slot time=0x200
192 * max collision retry = 0xf */
193 #define CONF_PROMISC 0x2e
194 0x0000, /* no HDLC : normal CRC : enable broadcast
195 * disable promiscuous/multicast modes */
196 0x003c, /* minimum frame length = 60 octets) */
197
198 0x0000,Cmd_SetAddr,
199 0x003e, /* link to next command */
200 #define CONF_HWADDR 0x38
201 0x0000,0x0000,0x0000, /* hardware address placed here */
202
203 0x0000,Cmd_MCast,
204 0x0076, /* link to next command */
205 #define CONF_NR_MULTICAST 0x44
206 0x0000, /* number of multicast addresses */
207 #define CONF_MULTICAST 0x46
208 0x0000, 0x0000, 0x0000, /* some addresses */
209 0x0000, 0x0000, 0x0000,
210 0x0000, 0x0000, 0x0000,
211 0x0000, 0x0000, 0x0000,
212 0x0000, 0x0000, 0x0000,
213 0x0000, 0x0000, 0x0000,
214 0x0000, 0x0000, 0x0000,
215 0x0000, 0x0000, 0x0000,
216
217 #define CONF_DIAG_RESULT 0x76
218 0x0000, Cmd_Diag,
219 0x007c, /* link to next command */
220
221 0x0000,Cmd_TDR|Cmd_INT,
222 0x0084,
223 #define CONF_TDR_RESULT 0x82
224 0x0000,
225
226 0x0000,Cmd_END|Cmd_Nop, /* end of configure sequence */
227 0x0084 /* dummy link */
228 };
229
230 /* maps irq number to EtherExpress magic value */
231 static char irqrmap[] = { 0,0,1,2,3,4,0,0,0,1,5,6,0,0,0,0 };
232
233 #ifdef CONFIG_MCA_LEGACY
234 /* mapping of the first four bits of the second POS register */
235 static unsigned short mca_iomap[] = {
236 0x270, 0x260, 0x250, 0x240, 0x230, 0x220, 0x210, 0x200,
237 0x370, 0x360, 0x350, 0x340, 0x330, 0x320, 0x310, 0x300
238 };
239 /* bits 5-7 of the second POS register */
240 static char mca_irqmap[] = { 12, 9, 3, 4, 5, 10, 11, 15 };
241 #endif
242
243 /*
244 * Prototypes for Linux interface
245 */
246
247 static int eexp_open(struct net_device *dev);
248 static int eexp_close(struct net_device *dev);
249 static void eexp_timeout(struct net_device *dev);
250 static struct net_device_stats *eexp_stats(struct net_device *dev);
251 static int eexp_xmit(struct sk_buff *buf, struct net_device *dev);
252
253 static irqreturn_t eexp_irq(int irq, void *dev_addr);
254 static void eexp_set_multicast(struct net_device *dev);
255
256 /*
257 * Prototypes for hardware access functions
258 */
259
260 static void eexp_hw_rx_pio(struct net_device *dev);
261 static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf,
262 unsigned short len);
263 static int eexp_hw_probe(struct net_device *dev,unsigned short ioaddr);
264 static unsigned short eexp_hw_readeeprom(unsigned short ioaddr,
265 unsigned char location);
266
267 static unsigned short eexp_hw_lasttxstat(struct net_device *dev);
268 static void eexp_hw_txrestart(struct net_device *dev);
269
270 static void eexp_hw_txinit (struct net_device *dev);
271 static void eexp_hw_rxinit (struct net_device *dev);
272
273 static void eexp_hw_init586 (struct net_device *dev);
274 static void eexp_setup_filter (struct net_device *dev);
275
276 static char *eexp_ifmap[]={"AUI", "BNC", "RJ45"};
277 enum eexp_iftype {AUI=0, BNC=1, TPE=2};
278
279 #define STARTED_RU 2
280 #define STARTED_CU 1
281
282 /*
283 * Primitive hardware access functions.
284 */
285
286 static inline unsigned short scb_status(struct net_device *dev)
287 {
288 return inw(dev->base_addr + 0xc008);
289 }
290
291 static inline unsigned short scb_rdcmd(struct net_device *dev)
292 {
293 return inw(dev->base_addr + 0xc00a);
294 }
295
296 static inline void scb_command(struct net_device *dev, unsigned short cmd)
297 {
298 outw(cmd, dev->base_addr + 0xc00a);
299 }
300
301 static inline void scb_wrcbl(struct net_device *dev, unsigned short val)
302 {
303 outw(val, dev->base_addr + 0xc00c);
304 }
305
306 static inline void scb_wrrfa(struct net_device *dev, unsigned short val)
307 {
308 outw(val, dev->base_addr + 0xc00e);
309 }
310
311 static inline void set_loopback(struct net_device *dev)
312 {
313 outb(inb(dev->base_addr + Config) | 2, dev->base_addr + Config);
314 }
315
316 static inline void clear_loopback(struct net_device *dev)
317 {
318 outb(inb(dev->base_addr + Config) & ~2, dev->base_addr + Config);
319 }
320
321 static inline unsigned short int SHADOW(short int addr)
322 {
323 addr &= 0x1f;
324 if (addr > 0xf) addr += 0x3ff0;
325 return addr + 0x4000;
326 }
327
328 /*
329 * Linux interface
330 */
331
332 /*
333 * checks for presence of EtherExpress card
334 */
335
336 static int __init do_express_probe(struct net_device *dev)
337 {
338 unsigned short *port;
339 static unsigned short ports[] = { 0x240,0x300,0x310,0x270,0x320,0x340,0 };
340 unsigned short ioaddr = dev->base_addr;
341 int dev_irq = dev->irq;
342 int err;
343
344 SET_MODULE_OWNER(dev);
345
346 dev->if_port = 0xff; /* not set */
347
348 #ifdef CONFIG_MCA_LEGACY
349 if (MCA_bus) {
350 int slot = 0;
351
352 /*
353 * Only find one card at a time. Subsequent calls
354 * will find others, however, proper multicard MCA
355 * probing and setup can't be done with the
356 * old-style Space.c init routines. -- ASF
357 */
358 while (slot != MCA_NOTFOUND) {
359 int pos0, pos1;
360
361 slot = mca_find_unused_adapter(0x628B, slot);
362 if (slot == MCA_NOTFOUND)
363 break;
364
365 pos0 = mca_read_stored_pos(slot, 2);
366 pos1 = mca_read_stored_pos(slot, 3);
367 ioaddr = mca_iomap[pos1&0xf];
368
369 dev->irq = mca_irqmap[(pos1>>4)&0x7];
370
371 /*
372 * XXX: Transciever selection is done
373 * differently on the MCA version.
374 * How to get it to select something
375 * other than external/AUI is currently
376 * unknown. This code is just for looks. -- ASF
377 */
378 if ((pos0 & 0x7) == 0x1)
379 dev->if_port = AUI;
380 else if ((pos0 & 0x7) == 0x5) {
381 if (pos1 & 0x80)
382 dev->if_port = BNC;
383 else
384 dev->if_port = TPE;
385 }
386
387 mca_set_adapter_name(slot, "Intel EtherExpress 16 MCA");
388 mca_set_adapter_procfn(slot, NULL, dev);
389 mca_mark_as_used(slot);
390
391 break;
392 }
393 }
394 #endif
395 if (ioaddr&0xfe00) {
396 if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress"))
397 return -EBUSY;
398 err = eexp_hw_probe(dev,ioaddr);
399 release_region(ioaddr, EEXP_IO_EXTENT);
400 return err;
401 } else if (ioaddr)
402 return -ENXIO;
403
404 for (port=&ports[0] ; *port ; port++ )
405 {
406 unsigned short sum = 0;
407 int i;
408 if (!request_region(*port, EEXP_IO_EXTENT, "EtherExpress"))
409 continue;
410 for ( i=0 ; i<4 ; i++ )
411 {
412 unsigned short t;
413 t = inb(*port + ID_PORT);
414 sum |= (t>>4) << ((t & 0x03)<<2);
415 }
416 if (sum==0xbaba && !eexp_hw_probe(dev,*port)) {
417 release_region(*port, EEXP_IO_EXTENT);
418 return 0;
419 }
420 release_region(*port, EEXP_IO_EXTENT);
421 dev->irq = dev_irq;
422 }
423 return -ENODEV;
424 }
425
426 #ifndef MODULE
427 struct net_device * __init express_probe(int unit)
428 {
429 struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
430 int err;
431
432 if (!dev)
433 return ERR_PTR(-ENOMEM);
434
435 sprintf(dev->name, "eth%d", unit);
436 netdev_boot_setup_check(dev);
437
438 err = do_express_probe(dev);
439 if (!err)
440 return dev;
441 free_netdev(dev);
442 return ERR_PTR(err);
443 }
444 #endif
445
446 /*
447 * open and initialize the adapter, ready for use
448 */
449
450 static int eexp_open(struct net_device *dev)
451 {
452 int ret;
453 unsigned short ioaddr = dev->base_addr;
454 struct net_local *lp = netdev_priv(dev);
455
456 #if NET_DEBUG > 6
457 printk(KERN_DEBUG "%s: eexp_open()\n", dev->name);
458 #endif
459
460 if (!dev->irq || !irqrmap[dev->irq])
461 return -ENXIO;
462
463 ret = request_irq(dev->irq,&eexp_irq,0,dev->name,dev);
464 if (ret) return ret;
465
466 if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress")) {
467 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
468 , ioaddr);
469 goto err_out1;
470 }
471 if (!request_region(ioaddr+0x4000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
472 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
473 , ioaddr+0x4000);
474 goto err_out2;
475 }
476 if (!request_region(ioaddr+0x8000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
477 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
478 , ioaddr+0x8000);
479 goto err_out3;
480 }
481 if (!request_region(ioaddr+0xc000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
482 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
483 , ioaddr+0xc000);
484 goto err_out4;
485 }
486
487 if (lp->width) {
488 printk("%s: forcing ASIC to 8-bit mode\n", dev->name);
489 outb(inb(dev->base_addr+Config)&~4, dev->base_addr+Config);
490 }
491
492 eexp_hw_init586(dev);
493 netif_start_queue(dev);
494 #if NET_DEBUG > 6
495 printk(KERN_DEBUG "%s: leaving eexp_open()\n", dev->name);
496 #endif
497 return 0;
498
499 err_out4:
500 release_region(ioaddr+0x8000, EEXP_IO_EXTENT);
501 err_out3:
502 release_region(ioaddr+0x4000, EEXP_IO_EXTENT);
503 err_out2:
504 release_region(ioaddr, EEXP_IO_EXTENT);
505 err_out1:
506 free_irq(dev->irq, dev);
507 return -EBUSY;
508 }
509
510 /*
511 * close and disable the interface, leaving the 586 in reset.
512 */
513
514 static int eexp_close(struct net_device *dev)
515 {
516 unsigned short ioaddr = dev->base_addr;
517 struct net_local *lp = netdev_priv(dev);
518
519 int irq = dev->irq;
520
521 netif_stop_queue(dev);
522
523 outb(SIRQ_dis|irqrmap[irq],ioaddr+SET_IRQ);
524 lp->started = 0;
525 scb_command(dev, SCB_CUsuspend|SCB_RUsuspend);
526 outb(0,ioaddr+SIGNAL_CA);
527 free_irq(irq,dev);
528 outb(i586_RST,ioaddr+EEPROM_Ctrl);
529 release_region(ioaddr, EEXP_IO_EXTENT);
530 release_region(ioaddr+0x4000, 16);
531 release_region(ioaddr+0x8000, 16);
532 release_region(ioaddr+0xc000, 16);
533
534 return 0;
535 }
536
537 /*
538 * Return interface stats
539 */
540
541 static struct net_device_stats *eexp_stats(struct net_device *dev)
542 {
543 struct net_local *lp = netdev_priv(dev);
544
545 return &lp->stats;
546 }
547
548 /*
549 * This gets called when a higher level thinks we are broken. Check that
550 * nothing has become jammed in the CU.
551 */
552
553 static void unstick_cu(struct net_device *dev)
554 {
555 struct net_local *lp = netdev_priv(dev);
556 unsigned short ioaddr = dev->base_addr;
557
558 if (lp->started)
559 {
560 if (time_after(jiffies, dev->trans_start + 50))
561 {
562 if (lp->tx_link==lp->last_tx_restart)
563 {
564 unsigned short boguscount=200,rsst;
565 printk(KERN_WARNING "%s: Retransmit timed out, status %04x, resetting...\n",
566 dev->name, scb_status(dev));
567 eexp_hw_txinit(dev);
568 lp->last_tx_restart = 0;
569 scb_wrcbl(dev, lp->tx_link);
570 scb_command(dev, SCB_CUstart);
571 outb(0,ioaddr+SIGNAL_CA);
572 while (!SCB_complete(rsst=scb_status(dev)))
573 {
574 if (!--boguscount)
575 {
576 boguscount=200;
577 printk(KERN_WARNING "%s: Reset timed out status %04x, retrying...\n",
578 dev->name,rsst);
579 scb_wrcbl(dev, lp->tx_link);
580 scb_command(dev, SCB_CUstart);
581 outb(0,ioaddr+SIGNAL_CA);
582 }
583 }
584 netif_wake_queue(dev);
585 }
586 else
587 {
588 unsigned short status = scb_status(dev);
589 if (SCB_CUdead(status))
590 {
591 unsigned short txstatus = eexp_hw_lasttxstat(dev);
592 printk(KERN_WARNING "%s: Transmit timed out, CU not active status %04x %04x, restarting...\n",
593 dev->name, status, txstatus);
594 eexp_hw_txrestart(dev);
595 }
596 else
597 {
598 unsigned short txstatus = eexp_hw_lasttxstat(dev);
599 if (netif_queue_stopped(dev) && !txstatus)
600 {
601 printk(KERN_WARNING "%s: CU wedged, status %04x %04x, resetting...\n",
602 dev->name,status,txstatus);
603 eexp_hw_init586(dev);
604 netif_wake_queue(dev);
605 }
606 else
607 {
608 printk(KERN_WARNING "%s: transmit timed out\n", dev->name);
609 }
610 }
611 }
612 }
613 }
614 else
615 {
616 if (time_after(jiffies, lp->init_time + 10))
617 {
618 unsigned short status = scb_status(dev);
619 printk(KERN_WARNING "%s: i82586 startup timed out, status %04x, resetting...\n",
620 dev->name, status);
621 eexp_hw_init586(dev);
622 netif_wake_queue(dev);
623 }
624 }
625 }
626
627 static void eexp_timeout(struct net_device *dev)
628 {
629 struct net_local *lp = netdev_priv(dev);
630 #ifdef CONFIG_SMP
631 unsigned long flags;
632 #endif
633 int status;
634
635 disable_irq(dev->irq);
636
637 /*
638 * Best would be to use synchronize_irq(); spin_lock() here
639 * lets make it work first..
640 */
641
642 #ifdef CONFIG_SMP
643 spin_lock_irqsave(&lp->lock, flags);
644 #endif
645
646 status = scb_status(dev);
647 unstick_cu(dev);
648 printk(KERN_INFO "%s: transmit timed out, %s?\n", dev->name,
649 (SCB_complete(status)?"lost interrupt":
650 "board on fire"));
651 lp->stats.tx_errors++;
652 lp->last_tx = jiffies;
653 if (!SCB_complete(status)) {
654 scb_command(dev, SCB_CUabort);
655 outb(0,dev->base_addr+SIGNAL_CA);
656 }
657 netif_wake_queue(dev);
658 #ifdef CONFIG_SMP
659 spin_unlock_irqrestore(&lp->lock, flags);
660 #endif
661 }
662
663 /*
664 * Called to transmit a packet, or to allow us to right ourselves
665 * if the kernel thinks we've died.
666 */
667 static int eexp_xmit(struct sk_buff *buf, struct net_device *dev)
668 {
669 struct net_local *lp = netdev_priv(dev);
670 short length = buf->len;
671 #ifdef CONFIG_SMP
672 unsigned long flags;
673 #endif
674
675 #if NET_DEBUG > 6
676 printk(KERN_DEBUG "%s: eexp_xmit()\n", dev->name);
677 #endif
678
679 if (buf->len < ETH_ZLEN) {
680 if (skb_padto(buf, ETH_ZLEN))
681 return 0;
682 length = ETH_ZLEN;
683 }
684
685 disable_irq(dev->irq);
686
687 /*
688 * Best would be to use synchronize_irq(); spin_lock() here
689 * lets make it work first..
690 */
691
692 #ifdef CONFIG_SMP
693 spin_lock_irqsave(&lp->lock, flags);
694 #endif
695
696 {
697 unsigned short *data = (unsigned short *)buf->data;
698
699 lp->stats.tx_bytes += length;
700
701 eexp_hw_tx_pio(dev,data,length);
702 }
703 dev_kfree_skb(buf);
704 #ifdef CONFIG_SMP
705 spin_unlock_irqrestore(&lp->lock, flags);
706 #endif
707 enable_irq(dev->irq);
708 return 0;
709 }
710
711 /*
712 * Handle an EtherExpress interrupt
713 * If we've finished initializing, start the RU and CU up.
714 * If we've already started, reap tx buffers, handle any received packets,
715 * check to make sure we've not become wedged.
716 */
717
718 static unsigned short eexp_start_irq(struct net_device *dev,
719 unsigned short status)
720 {
721 unsigned short ack_cmd = SCB_ack(status);
722 struct net_local *lp = netdev_priv(dev);
723 unsigned short ioaddr = dev->base_addr;
724 if ((dev->flags & IFF_UP) && !(lp->started & STARTED_CU)) {
725 short diag_status, tdr_status;
726 while (SCB_CUstat(status)==2)
727 status = scb_status(dev);
728 #if NET_DEBUG > 4
729 printk("%s: CU went non-active (status %04x)\n",
730 dev->name, status);
731 #endif
732
733 outw(CONF_DIAG_RESULT & ~31, ioaddr + SM_PTR);
734 diag_status = inw(ioaddr + SHADOW(CONF_DIAG_RESULT));
735 if (diag_status & 1<<11) {
736 printk(KERN_WARNING "%s: 82586 failed self-test\n",
737 dev->name);
738 } else if (!(diag_status & 1<<13)) {
739 printk(KERN_WARNING "%s: 82586 self-test failed to complete\n", dev->name);
740 }
741
742 outw(CONF_TDR_RESULT & ~31, ioaddr + SM_PTR);
743 tdr_status = inw(ioaddr + SHADOW(CONF_TDR_RESULT));
744 if (tdr_status & (TDR_SHORT|TDR_OPEN)) {
745 printk(KERN_WARNING "%s: TDR reports cable %s at %d tick%s\n", dev->name, (tdr_status & TDR_SHORT)?"short":"broken", tdr_status & TDR_TIME, ((tdr_status & TDR_TIME) != 1) ? "s" : "");
746 }
747 else if (tdr_status & TDR_XCVRPROBLEM) {
748 printk(KERN_WARNING "%s: TDR reports transceiver problem\n", dev->name);
749 }
750 else if (tdr_status & TDR_LINKOK) {
751 #if NET_DEBUG > 4
752 printk(KERN_DEBUG "%s: TDR reports link OK\n", dev->name);
753 #endif
754 } else {
755 printk("%s: TDR is ga-ga (status %04x)\n", dev->name,
756 tdr_status);
757 }
758
759 lp->started |= STARTED_CU;
760 scb_wrcbl(dev, lp->tx_link);
761 /* if the RU isn't running, start it now */
762 if (!(lp->started & STARTED_RU)) {
763 ack_cmd |= SCB_RUstart;
764 scb_wrrfa(dev, lp->rx_buf_start);
765 lp->rx_ptr = lp->rx_buf_start;
766 lp->started |= STARTED_RU;
767 }
768 ack_cmd |= SCB_CUstart | 0x2000;
769 }
770
771 if ((dev->flags & IFF_UP) && !(lp->started & STARTED_RU) && SCB_RUstat(status)==4)
772 lp->started|=STARTED_RU;
773
774 return ack_cmd;
775 }
776
777 static void eexp_cmd_clear(struct net_device *dev)
778 {
779 unsigned long int oldtime = jiffies;
780 while (scb_rdcmd(dev) && (time_before(jiffies, oldtime + 10)));
781 if (scb_rdcmd(dev)) {
782 printk("%s: command didn't clear\n", dev->name);
783 }
784 }
785
786 static irqreturn_t eexp_irq(int irq, void *dev_info)
787 {
788 struct net_device *dev = dev_info;
789 struct net_local *lp;
790 unsigned short ioaddr,status,ack_cmd;
791 unsigned short old_read_ptr, old_write_ptr;
792
793 lp = netdev_priv(dev);
794 ioaddr = dev->base_addr;
795
796 spin_lock(&lp->lock);
797
798 old_read_ptr = inw(ioaddr+READ_PTR);
799 old_write_ptr = inw(ioaddr+WRITE_PTR);
800
801 outb(SIRQ_dis|irqrmap[irq],ioaddr+SET_IRQ);
802
803
804 status = scb_status(dev);
805
806 #if NET_DEBUG > 4
807 printk(KERN_DEBUG "%s: interrupt (status %x)\n", dev->name, status);
808 #endif
809
810 if (lp->started == (STARTED_CU | STARTED_RU)) {
811
812 do {
813 eexp_cmd_clear(dev);
814
815 ack_cmd = SCB_ack(status);
816 scb_command(dev, ack_cmd);
817 outb(0,ioaddr+SIGNAL_CA);
818
819 eexp_cmd_clear(dev);
820
821 if (SCB_complete(status)) {
822 if (!eexp_hw_lasttxstat(dev)) {
823 printk("%s: tx interrupt but no status\n", dev->name);
824 }
825 }
826
827 if (SCB_rxdframe(status))
828 eexp_hw_rx_pio(dev);
829
830 status = scb_status(dev);
831 } while (status & 0xc000);
832
833 if (SCB_RUdead(status))
834 {
835 printk(KERN_WARNING "%s: RU stopped: status %04x\n",
836 dev->name,status);
837 #if 0
838 printk(KERN_WARNING "%s: cur_rfd=%04x, cur_rbd=%04x\n", dev->name, lp->cur_rfd, lp->cur_rbd);
839 outw(lp->cur_rfd, ioaddr+READ_PTR);
840 printk(KERN_WARNING "%s: [%04x]\n", dev->name, inw(ioaddr+DATAPORT));
841 outw(lp->cur_rfd+6, ioaddr+READ_PTR);
842 printk(KERN_WARNING "%s: rbd is %04x\n", dev->name, rbd= inw(ioaddr+DATAPORT));
843 outw(rbd, ioaddr+READ_PTR);
844 printk(KERN_WARNING "%s: [%04x %04x] ", dev->name, inw(ioaddr+DATAPORT), inw(ioaddr+DATAPORT));
845 outw(rbd+8, ioaddr+READ_PTR);
846 printk("[%04x]\n", inw(ioaddr+DATAPORT));
847 #endif
848 lp->stats.rx_errors++;
849 #if 1
850 eexp_hw_rxinit(dev);
851 #else
852 lp->cur_rfd = lp->first_rfd;
853 #endif
854 scb_wrrfa(dev, lp->rx_buf_start);
855 scb_command(dev, SCB_RUstart);
856 outb(0,ioaddr+SIGNAL_CA);
857 }
858 } else {
859 if (status & 0x8000)
860 ack_cmd = eexp_start_irq(dev, status);
861 else
862 ack_cmd = SCB_ack(status);
863 scb_command(dev, ack_cmd);
864 outb(0,ioaddr+SIGNAL_CA);
865 }
866
867 eexp_cmd_clear(dev);
868
869 outb(SIRQ_en|irqrmap[irq],ioaddr+SET_IRQ);
870
871 #if NET_DEBUG > 6
872 printk("%s: leaving eexp_irq()\n", dev->name);
873 #endif
874 outw(old_read_ptr, ioaddr+READ_PTR);
875 outw(old_write_ptr, ioaddr+WRITE_PTR);
876
877 spin_unlock(&lp->lock);
878 return IRQ_HANDLED;
879 }
880
881 /*
882 * Hardware access functions
883 */
884
885 /*
886 * Set the cable type to use.
887 */
888
889 static void eexp_hw_set_interface(struct net_device *dev)
890 {
891 unsigned char oldval = inb(dev->base_addr + 0x300e);
892 oldval &= ~0x82;
893 switch (dev->if_port) {
894 case TPE:
895 oldval |= 0x2;
896 case BNC:
897 oldval |= 0x80;
898 break;
899 }
900 outb(oldval, dev->base_addr+0x300e);
901 mdelay(20);
902 }
903
904 /*
905 * Check all the receive buffers, and hand any received packets
906 * to the upper levels. Basic sanity check on each frame
907 * descriptor, though we don't bother trying to fix broken ones.
908 */
909
910 static void eexp_hw_rx_pio(struct net_device *dev)
911 {
912 struct net_local *lp = netdev_priv(dev);
913 unsigned short rx_block = lp->rx_ptr;
914 unsigned short boguscount = lp->num_rx_bufs;
915 unsigned short ioaddr = dev->base_addr;
916 unsigned short status;
917
918 #if NET_DEBUG > 6
919 printk(KERN_DEBUG "%s: eexp_hw_rx()\n", dev->name);
920 #endif
921
922 do {
923 unsigned short rfd_cmd, rx_next, pbuf, pkt_len;
924
925 outw(rx_block, ioaddr + READ_PTR);
926 status = inw(ioaddr + DATAPORT);
927
928 if (FD_Done(status))
929 {
930 rfd_cmd = inw(ioaddr + DATAPORT);
931 rx_next = inw(ioaddr + DATAPORT);
932 pbuf = inw(ioaddr + DATAPORT);
933
934 outw(pbuf, ioaddr + READ_PTR);
935 pkt_len = inw(ioaddr + DATAPORT);
936
937 if (rfd_cmd!=0x0000)
938 {
939 printk(KERN_WARNING "%s: rfd_cmd not zero:0x%04x\n",
940 dev->name, rfd_cmd);
941 continue;
942 }
943 else if (pbuf!=rx_block+0x16)
944 {
945 printk(KERN_WARNING "%s: rfd and rbd out of sync 0x%04x 0x%04x\n",
946 dev->name, rx_block+0x16, pbuf);
947 continue;
948 }
949 else if ((pkt_len & 0xc000)!=0xc000)
950 {
951 printk(KERN_WARNING "%s: EOF or F not set on received buffer (%04x)\n",
952 dev->name, pkt_len & 0xc000);
953 continue;
954 }
955 else if (!FD_OK(status))
956 {
957 lp->stats.rx_errors++;
958 if (FD_CRC(status))
959 lp->stats.rx_crc_errors++;
960 if (FD_Align(status))
961 lp->stats.rx_frame_errors++;
962 if (FD_Resrc(status))
963 lp->stats.rx_fifo_errors++;
964 if (FD_DMA(status))
965 lp->stats.rx_over_errors++;
966 if (FD_Short(status))
967 lp->stats.rx_length_errors++;
968 }
969 else
970 {
971 struct sk_buff *skb;
972 pkt_len &= 0x3fff;
973 skb = dev_alloc_skb(pkt_len+16);
974 if (skb == NULL)
975 {
976 printk(KERN_WARNING "%s: Memory squeeze, dropping packet\n",dev->name);
977 lp->stats.rx_dropped++;
978 break;
979 }
980 skb_reserve(skb, 2);
981 outw(pbuf+10, ioaddr+READ_PTR);
982 insw(ioaddr+DATAPORT, skb_put(skb,pkt_len),(pkt_len+1)>>1);
983 skb->protocol = eth_type_trans(skb,dev);
984 netif_rx(skb);
985 dev->last_rx = jiffies;
986 lp->stats.rx_packets++;
987 lp->stats.rx_bytes += pkt_len;
988 }
989 outw(rx_block, ioaddr+WRITE_PTR);
990 outw(0, ioaddr+DATAPORT);
991 outw(0, ioaddr+DATAPORT);
992 rx_block = rx_next;
993 }
994 } while (FD_Done(status) && boguscount--);
995 lp->rx_ptr = rx_block;
996 }
997
998 /*
999 * Hand a packet to the card for transmission
1000 * If we get here, we MUST have already checked
1001 * to make sure there is room in the transmit
1002 * buffer region.
1003 */
1004
1005 static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf,
1006 unsigned short len)
1007 {
1008 struct net_local *lp = netdev_priv(dev);
1009 unsigned short ioaddr = dev->base_addr;
1010
1011 if (LOCKUP16 || lp->width) {
1012 /* Stop the CU so that there is no chance that it
1013 jumps off to a bogus address while we are writing the
1014 pointer to the next transmit packet in 8-bit mode --
1015 this eliminates the "CU wedged" errors in 8-bit mode.
1016 (Zoltan Szilagyi 10-12-96) */
1017 scb_command(dev, SCB_CUsuspend);
1018 outw(0xFFFF, ioaddr+SIGNAL_CA);
1019 }
1020
1021 outw(lp->tx_head, ioaddr + WRITE_PTR);
1022
1023 outw(0x0000, ioaddr + DATAPORT);
1024 outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT);
1025 outw(lp->tx_head+0x08, ioaddr + DATAPORT);
1026 outw(lp->tx_head+0x0e, ioaddr + DATAPORT);
1027
1028 outw(0x0000, ioaddr + DATAPORT);
1029 outw(0x0000, ioaddr + DATAPORT);
1030 outw(lp->tx_head+0x08, ioaddr + DATAPORT);
1031
1032 outw(0x8000|len, ioaddr + DATAPORT);
1033 outw(-1, ioaddr + DATAPORT);
1034 outw(lp->tx_head+0x16, ioaddr + DATAPORT);
1035 outw(0, ioaddr + DATAPORT);
1036
1037 outsw(ioaddr + DATAPORT, buf, (len+1)>>1);
1038
1039 outw(lp->tx_tail+0xc, ioaddr + WRITE_PTR);
1040 outw(lp->tx_head, ioaddr + DATAPORT);
1041
1042 dev->trans_start = jiffies;
1043 lp->tx_tail = lp->tx_head;
1044 if (lp->tx_head==TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE))
1045 lp->tx_head = TX_BUF_START;
1046 else
1047 lp->tx_head += TX_BUF_SIZE;
1048 if (lp->tx_head != lp->tx_reap)
1049 netif_wake_queue(dev);
1050
1051 if (LOCKUP16 || lp->width) {
1052 /* Restart the CU so that the packet can actually
1053 be transmitted. (Zoltan Szilagyi 10-12-96) */
1054 scb_command(dev, SCB_CUresume);
1055 outw(0xFFFF, ioaddr+SIGNAL_CA);
1056 }
1057
1058 lp->stats.tx_packets++;
1059 lp->last_tx = jiffies;
1060 }
1061
1062 /*
1063 * Sanity check the suspected EtherExpress card
1064 * Read hardware address, reset card, size memory and initialize buffer
1065 * memory pointers. These are held in dev->priv, in case someone has more
1066 * than one card in a machine.
1067 */
1068
1069 static int __init eexp_hw_probe(struct net_device *dev, unsigned short ioaddr)
1070 {
1071 unsigned short hw_addr[3];
1072 unsigned char buswidth;
1073 unsigned int memory_size;
1074 int i;
1075 unsigned short xsum = 0;
1076 struct net_local *lp = netdev_priv(dev);
1077
1078 printk("%s: EtherExpress 16 at %#x ",dev->name,ioaddr);
1079
1080 outb(ASIC_RST, ioaddr+EEPROM_Ctrl);
1081 outb(0, ioaddr+EEPROM_Ctrl);
1082 udelay(500);
1083 outb(i586_RST, ioaddr+EEPROM_Ctrl);
1084
1085 hw_addr[0] = eexp_hw_readeeprom(ioaddr,2);
1086 hw_addr[1] = eexp_hw_readeeprom(ioaddr,3);
1087 hw_addr[2] = eexp_hw_readeeprom(ioaddr,4);
1088
1089 /* Standard Address or Compaq LTE Address */
1090 if (!((hw_addr[2]==0x00aa && ((hw_addr[1] & 0xff00)==0x0000)) ||
1091 (hw_addr[2]==0x0080 && ((hw_addr[1] & 0xff00)==0x5F00))))
1092 {
1093 printk(" rejected: invalid address %04x%04x%04x\n",
1094 hw_addr[2],hw_addr[1],hw_addr[0]);
1095 return -ENODEV;
1096 }
1097
1098 /* Calculate the EEPROM checksum. Carry on anyway if it's bad,
1099 * though.
1100 */
1101 for (i = 0; i < 64; i++)
1102 xsum += eexp_hw_readeeprom(ioaddr, i);
1103 if (xsum != 0xbaba)
1104 printk(" (bad EEPROM xsum 0x%02x)", xsum);
1105
1106 dev->base_addr = ioaddr;
1107 for ( i=0 ; i<6 ; i++ )
1108 dev->dev_addr[i] = ((unsigned char *)hw_addr)[5-i];
1109
1110 {
1111 static char irqmap[]={0, 9, 3, 4, 5, 10, 11, 0};
1112 unsigned short setupval = eexp_hw_readeeprom(ioaddr,0);
1113
1114 /* Use the IRQ from EEPROM if none was given */
1115 if (!dev->irq)
1116 dev->irq = irqmap[setupval>>13];
1117
1118 if (dev->if_port == 0xff) {
1119 dev->if_port = !(setupval & 0x1000) ? AUI :
1120 eexp_hw_readeeprom(ioaddr,5) & 0x1 ? TPE : BNC;
1121 }
1122
1123 buswidth = !((setupval & 0x400) >> 10);
1124 }
1125
1126 memset(lp, 0, sizeof(struct net_local));
1127 spin_lock_init(&lp->lock);
1128
1129 printk("(IRQ %d, %s connector, %d-bit bus", dev->irq,
1130 eexp_ifmap[dev->if_port], buswidth?8:16);
1131
1132 if (!request_region(dev->base_addr + 0x300e, 1, "EtherExpress"))
1133 return -EBUSY;
1134
1135 eexp_hw_set_interface(dev);
1136
1137 release_region(dev->base_addr + 0x300e, 1);
1138
1139 /* Find out how much RAM we have on the card */
1140 outw(0, dev->base_addr + WRITE_PTR);
1141 for (i = 0; i < 32768; i++)
1142 outw(0, dev->base_addr + DATAPORT);
1143
1144 for (memory_size = 0; memory_size < 64; memory_size++)
1145 {
1146 outw(memory_size<<10, dev->base_addr + READ_PTR);
1147 if (inw(dev->base_addr+DATAPORT))
1148 break;
1149 outw(memory_size<<10, dev->base_addr + WRITE_PTR);
1150 outw(memory_size | 0x5000, dev->base_addr+DATAPORT);
1151 outw(memory_size<<10, dev->base_addr + READ_PTR);
1152 if (inw(dev->base_addr+DATAPORT) != (memory_size | 0x5000))
1153 break;
1154 }
1155
1156 /* Sort out the number of buffers. We may have 16, 32, 48 or 64k
1157 * of RAM to play with.
1158 */
1159 lp->num_tx_bufs = 4;
1160 lp->rx_buf_end = 0x3ff6;
1161 switch (memory_size)
1162 {
1163 case 64:
1164 lp->rx_buf_end += 0x4000;
1165 case 48:
1166 lp->num_tx_bufs += 4;
1167 lp->rx_buf_end += 0x4000;
1168 case 32:
1169 lp->rx_buf_end += 0x4000;
1170 case 16:
1171 printk(", %dk RAM)\n", memory_size);
1172 break;
1173 default:
1174 printk(") bad memory size (%dk).\n", memory_size);
1175 return -ENODEV;
1176 break;
1177 }
1178
1179 lp->rx_buf_start = TX_BUF_START + (lp->num_tx_bufs*TX_BUF_SIZE);
1180 lp->width = buswidth;
1181
1182 dev->open = eexp_open;
1183 dev->stop = eexp_close;
1184 dev->hard_start_xmit = eexp_xmit;
1185 dev->get_stats = eexp_stats;
1186 dev->set_multicast_list = &eexp_set_multicast;
1187 dev->tx_timeout = eexp_timeout;
1188 dev->watchdog_timeo = 2*HZ;
1189
1190 return register_netdev(dev);
1191 }
1192
1193 /*
1194 * Read a word from the EtherExpress on-board serial EEPROM.
1195 * The EEPROM contains 64 words of 16 bits.
1196 */
1197 static unsigned short __init eexp_hw_readeeprom(unsigned short ioaddr,
1198 unsigned char location)
1199 {
1200 unsigned short cmd = 0x180|(location&0x7f);
1201 unsigned short rval = 0,wval = EC_CS|i586_RST;
1202 int i;
1203
1204 outb(EC_CS|i586_RST,ioaddr+EEPROM_Ctrl);
1205 for (i=0x100 ; i ; i>>=1 )
1206 {
1207 if (cmd&i)
1208 wval |= EC_Wr;
1209 else
1210 wval &= ~EC_Wr;
1211
1212 outb(wval,ioaddr+EEPROM_Ctrl);
1213 outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
1214 eeprom_delay();
1215 outb(wval,ioaddr+EEPROM_Ctrl);
1216 eeprom_delay();
1217 }
1218 wval &= ~EC_Wr;
1219 outb(wval,ioaddr+EEPROM_Ctrl);
1220 for (i=0x8000 ; i ; i>>=1 )
1221 {
1222 outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
1223 eeprom_delay();
1224 if (inb(ioaddr+EEPROM_Ctrl)&EC_Rd)
1225 rval |= i;
1226 outb(wval,ioaddr+EEPROM_Ctrl);
1227 eeprom_delay();
1228 }
1229 wval &= ~EC_CS;
1230 outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
1231 eeprom_delay();
1232 outb(wval,ioaddr+EEPROM_Ctrl);
1233 eeprom_delay();
1234 return rval;
1235 }
1236
1237 /*
1238 * Reap tx buffers and return last transmit status.
1239 * if ==0 then either:
1240 * a) we're not transmitting anything, so why are we here?
1241 * b) we've died.
1242 * otherwise, Stat_Busy(return) means we've still got some packets
1243 * to transmit, Stat_Done(return) means our buffers should be empty
1244 * again
1245 */
1246
1247 static unsigned short eexp_hw_lasttxstat(struct net_device *dev)
1248 {
1249 struct net_local *lp = netdev_priv(dev);
1250 unsigned short tx_block = lp->tx_reap;
1251 unsigned short status;
1252
1253 if (!netif_queue_stopped(dev) && lp->tx_head==lp->tx_reap)
1254 return 0x0000;
1255
1256 do
1257 {
1258 outw(tx_block & ~31, dev->base_addr + SM_PTR);
1259 status = inw(dev->base_addr + SHADOW(tx_block));
1260 if (!Stat_Done(status))
1261 {
1262 lp->tx_link = tx_block;
1263 return status;
1264 }
1265 else
1266 {
1267 lp->last_tx_restart = 0;
1268 lp->stats.collisions += Stat_NoColl(status);
1269 if (!Stat_OK(status))
1270 {
1271 char *whatsup = NULL;
1272 lp->stats.tx_errors++;
1273 if (Stat_Abort(status))
1274 lp->stats.tx_aborted_errors++;
1275 if (Stat_TNoCar(status)) {
1276 whatsup = "aborted, no carrier";
1277 lp->stats.tx_carrier_errors++;
1278 }
1279 if (Stat_TNoCTS(status)) {
1280 whatsup = "aborted, lost CTS";
1281 lp->stats.tx_carrier_errors++;
1282 }
1283 if (Stat_TNoDMA(status)) {
1284 whatsup = "FIFO underran";
1285 lp->stats.tx_fifo_errors++;
1286 }
1287 if (Stat_TXColl(status)) {
1288 whatsup = "aborted, too many collisions";
1289 lp->stats.tx_aborted_errors++;
1290 }
1291 if (whatsup)
1292 printk(KERN_INFO "%s: transmit %s\n",
1293 dev->name, whatsup);
1294 }
1295 else
1296 lp->stats.tx_packets++;
1297 }
1298 if (tx_block == TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE))
1299 lp->tx_reap = tx_block = TX_BUF_START;
1300 else
1301 lp->tx_reap = tx_block += TX_BUF_SIZE;
1302 netif_wake_queue(dev);
1303 }
1304 while (lp->tx_reap != lp->tx_head);
1305
1306 lp->tx_link = lp->tx_tail + 0x08;
1307
1308 return status;
1309 }
1310
1311 /*
1312 * This should never happen. It is called when some higher routine detects
1313 * that the CU has stopped, to try to restart it from the last packet we knew
1314 * we were working on, or the idle loop if we had finished for the time.
1315 */
1316
1317 static void eexp_hw_txrestart(struct net_device *dev)
1318 {
1319 struct net_local *lp = netdev_priv(dev);
1320 unsigned short ioaddr = dev->base_addr;
1321
1322 lp->last_tx_restart = lp->tx_link;
1323 scb_wrcbl(dev, lp->tx_link);
1324 scb_command(dev, SCB_CUstart);
1325 outb(0,ioaddr+SIGNAL_CA);
1326
1327 {
1328 unsigned short boguscount=50,failcount=5;
1329 while (!scb_status(dev))
1330 {
1331 if (!--boguscount)
1332 {
1333 if (--failcount)
1334 {
1335 printk(KERN_WARNING "%s: CU start timed out, status %04x, cmd %04x\n", dev->name, scb_status(dev), scb_rdcmd(dev));
1336 scb_wrcbl(dev, lp->tx_link);
1337 scb_command(dev, SCB_CUstart);
1338 outb(0,ioaddr+SIGNAL_CA);
1339 boguscount = 100;
1340 }
1341 else
1342 {
1343 printk(KERN_WARNING "%s: Failed to restart CU, resetting board...\n",dev->name);
1344 eexp_hw_init586(dev);
1345 netif_wake_queue(dev);
1346 return;
1347 }
1348 }
1349 }
1350 }
1351 }
1352
1353 /*
1354 * Writes down the list of transmit buffers into card memory. Each
1355 * entry consists of an 82586 transmit command, followed by a jump
1356 * pointing to itself. When we want to transmit a packet, we write
1357 * the data into the appropriate transmit buffer and then modify the
1358 * preceding jump to point at the new transmit command. This means that
1359 * the 586 command unit is continuously active.
1360 */
1361
1362 static void eexp_hw_txinit(struct net_device *dev)
1363 {
1364 struct net_local *lp = netdev_priv(dev);
1365 unsigned short tx_block = TX_BUF_START;
1366 unsigned short curtbuf;
1367 unsigned short ioaddr = dev->base_addr;
1368
1369 for ( curtbuf=0 ; curtbuf<lp->num_tx_bufs ; curtbuf++ )
1370 {
1371 outw(tx_block, ioaddr + WRITE_PTR);
1372
1373 outw(0x0000, ioaddr + DATAPORT);
1374 outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT);
1375 outw(tx_block+0x08, ioaddr + DATAPORT);
1376 outw(tx_block+0x0e, ioaddr + DATAPORT);
1377
1378 outw(0x0000, ioaddr + DATAPORT);
1379 outw(0x0000, ioaddr + DATAPORT);
1380 outw(tx_block+0x08, ioaddr + DATAPORT);
1381
1382 outw(0x8000, ioaddr + DATAPORT);
1383 outw(-1, ioaddr + DATAPORT);
1384 outw(tx_block+0x16, ioaddr + DATAPORT);
1385 outw(0x0000, ioaddr + DATAPORT);
1386
1387 tx_block += TX_BUF_SIZE;
1388 }
1389 lp->tx_head = TX_BUF_START;
1390 lp->tx_reap = TX_BUF_START;
1391 lp->tx_tail = tx_block - TX_BUF_SIZE;
1392 lp->tx_link = lp->tx_tail + 0x08;
1393 lp->rx_buf_start = tx_block;
1394
1395 }
1396
1397 /*
1398 * Write the circular list of receive buffer descriptors to card memory.
1399 * The end of the list isn't marked, which means that the 82586 receive
1400 * unit will loop until buffers become available (this avoids it giving us
1401 * "out of resources" messages).
1402 */
1403
1404 static void eexp_hw_rxinit(struct net_device *dev)
1405 {
1406 struct net_local *lp = netdev_priv(dev);
1407 unsigned short rx_block = lp->rx_buf_start;
1408 unsigned short ioaddr = dev->base_addr;
1409
1410 lp->num_rx_bufs = 0;
1411 lp->rx_first = lp->rx_ptr = rx_block;
1412 do
1413 {
1414 lp->num_rx_bufs++;
1415
1416 outw(rx_block, ioaddr + WRITE_PTR);
1417
1418 outw(0, ioaddr + DATAPORT); outw(0, ioaddr+DATAPORT);
1419 outw(rx_block + RX_BUF_SIZE, ioaddr+DATAPORT);
1420 outw(0xffff, ioaddr+DATAPORT);
1421
1422 outw(0x0000, ioaddr+DATAPORT);
1423 outw(0xdead, ioaddr+DATAPORT);
1424 outw(0xdead, ioaddr+DATAPORT);
1425 outw(0xdead, ioaddr+DATAPORT);
1426 outw(0xdead, ioaddr+DATAPORT);
1427 outw(0xdead, ioaddr+DATAPORT);
1428 outw(0xdead, ioaddr+DATAPORT);
1429
1430 outw(0x0000, ioaddr+DATAPORT);
1431 outw(rx_block + RX_BUF_SIZE + 0x16, ioaddr+DATAPORT);
1432 outw(rx_block + 0x20, ioaddr+DATAPORT);
1433 outw(0, ioaddr+DATAPORT);
1434 outw(RX_BUF_SIZE-0x20, ioaddr+DATAPORT);
1435
1436 lp->rx_last = rx_block;
1437 rx_block += RX_BUF_SIZE;
1438 } while (rx_block <= lp->rx_buf_end-RX_BUF_SIZE);
1439
1440
1441 /* Make first Rx frame descriptor point to first Rx buffer
1442 descriptor */
1443 outw(lp->rx_first + 6, ioaddr+WRITE_PTR);
1444 outw(lp->rx_first + 0x16, ioaddr+DATAPORT);
1445
1446 /* Close Rx frame descriptor ring */
1447 outw(lp->rx_last + 4, ioaddr+WRITE_PTR);
1448 outw(lp->rx_first, ioaddr+DATAPORT);
1449
1450 /* Close Rx buffer descriptor ring */
1451 outw(lp->rx_last + 0x16 + 2, ioaddr+WRITE_PTR);
1452 outw(lp->rx_first + 0x16, ioaddr+DATAPORT);
1453
1454 }
1455
1456 /*
1457 * Un-reset the 586, and start the configuration sequence. We don't wait for
1458 * this to finish, but allow the interrupt handler to start the CU and RU for
1459 * us. We can't start the receive/transmission system up before we know that
1460 * the hardware is configured correctly.
1461 */
1462
1463 static void eexp_hw_init586(struct net_device *dev)
1464 {
1465 struct net_local *lp = netdev_priv(dev);
1466 unsigned short ioaddr = dev->base_addr;
1467 int i;
1468
1469 #if NET_DEBUG > 6
1470 printk("%s: eexp_hw_init586()\n", dev->name);
1471 #endif
1472
1473 lp->started = 0;
1474
1475 set_loopback(dev);
1476
1477 outb(SIRQ_dis|irqrmap[dev->irq],ioaddr+SET_IRQ);
1478
1479 /* Download the startup code */
1480 outw(lp->rx_buf_end & ~31, ioaddr + SM_PTR);
1481 outw(lp->width?0x0001:0x0000, ioaddr + 0x8006);
1482 outw(0x0000, ioaddr + 0x8008);
1483 outw(0x0000, ioaddr + 0x800a);
1484 outw(0x0000, ioaddr + 0x800c);
1485 outw(0x0000, ioaddr + 0x800e);
1486
1487 for (i = 0; i < (sizeof(start_code)); i+=32) {
1488 int j;
1489 outw(i, ioaddr + SM_PTR);
1490 for (j = 0; j < 16; j+=2)
1491 outw(start_code[(i+j)/2],
1492 ioaddr+0x4000+j);
1493 for (j = 0; j < 16; j+=2)
1494 outw(start_code[(i+j+16)/2],
1495 ioaddr+0x8000+j);
1496 }
1497
1498 /* Do we want promiscuous mode or multicast? */
1499 outw(CONF_PROMISC & ~31, ioaddr+SM_PTR);
1500 i = inw(ioaddr+SHADOW(CONF_PROMISC));
1501 outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1),
1502 ioaddr+SHADOW(CONF_PROMISC));
1503 lp->was_promisc = dev->flags & IFF_PROMISC;
1504 #if 0
1505 eexp_setup_filter(dev);
1506 #endif
1507
1508 /* Write our hardware address */
1509 outw(CONF_HWADDR & ~31, ioaddr+SM_PTR);
1510 outw(((unsigned short *)dev->dev_addr)[0], ioaddr+SHADOW(CONF_HWADDR));
1511 outw(((unsigned short *)dev->dev_addr)[1],
1512 ioaddr+SHADOW(CONF_HWADDR+2));
1513 outw(((unsigned short *)dev->dev_addr)[2],
1514 ioaddr+SHADOW(CONF_HWADDR+4));
1515
1516 eexp_hw_txinit(dev);
1517 eexp_hw_rxinit(dev);
1518
1519 outb(0,ioaddr+EEPROM_Ctrl);
1520 mdelay(5);
1521
1522 scb_command(dev, 0xf000);
1523 outb(0,ioaddr+SIGNAL_CA);
1524
1525 outw(0, ioaddr+SM_PTR);
1526
1527 {
1528 unsigned short rboguscount=50,rfailcount=5;
1529 while (inw(ioaddr+0x4000))
1530 {
1531 if (!--rboguscount)
1532 {
1533 printk(KERN_WARNING "%s: i82586 reset timed out, kicking...\n",
1534 dev->name);
1535 scb_command(dev, 0);
1536 outb(0,ioaddr+SIGNAL_CA);
1537 rboguscount = 100;
1538 if (!--rfailcount)
1539 {
1540 printk(KERN_WARNING "%s: i82586 not responding, giving up.\n",
1541 dev->name);
1542 return;
1543 }
1544 }
1545 }
1546 }
1547
1548 scb_wrcbl(dev, CONF_LINK);
1549 scb_command(dev, 0xf000|SCB_CUstart);
1550 outb(0,ioaddr+SIGNAL_CA);
1551
1552 {
1553 unsigned short iboguscount=50,ifailcount=5;
1554 while (!scb_status(dev))
1555 {
1556 if (!--iboguscount)
1557 {
1558 if (--ifailcount)
1559 {
1560 printk(KERN_WARNING "%s: i82586 initialization timed out, status %04x, cmd %04x\n",
1561 dev->name, scb_status(dev), scb_rdcmd(dev));
1562 scb_wrcbl(dev, CONF_LINK);
1563 scb_command(dev, 0xf000|SCB_CUstart);
1564 outb(0,ioaddr+SIGNAL_CA);
1565 iboguscount = 100;
1566 }
1567 else
1568 {
1569 printk(KERN_WARNING "%s: Failed to initialize i82586, giving up.\n",dev->name);
1570 return;
1571 }
1572 }
1573 }
1574 }
1575
1576 clear_loopback(dev);
1577 outb(SIRQ_en|irqrmap[dev->irq],ioaddr+SET_IRQ);
1578
1579 lp->init_time = jiffies;
1580 #if NET_DEBUG > 6
1581 printk("%s: leaving eexp_hw_init586()\n", dev->name);
1582 #endif
1583 return;
1584 }
1585
1586 static void eexp_setup_filter(struct net_device *dev)
1587 {
1588 struct dev_mc_list *dmi = dev->mc_list;
1589 unsigned short ioaddr = dev->base_addr;
1590 int count = dev->mc_count;
1591 int i;
1592 if (count > 8) {
1593 printk(KERN_INFO "%s: too many multicast addresses (%d)\n",
1594 dev->name, count);
1595 count = 8;
1596 }
1597
1598 outw(CONF_NR_MULTICAST & ~31, ioaddr+SM_PTR);
1599 outw(count, ioaddr+SHADOW(CONF_NR_MULTICAST));
1600 for (i = 0; i < count; i++) {
1601 unsigned short *data = (unsigned short *)dmi->dmi_addr;
1602 if (!dmi) {
1603 printk(KERN_INFO "%s: too few multicast addresses\n", dev->name);
1604 break;
1605 }
1606 if (dmi->dmi_addrlen != ETH_ALEN) {
1607 printk(KERN_INFO "%s: invalid multicast address length given.\n", dev->name);
1608 continue;
1609 }
1610 outw((CONF_MULTICAST+(6*i)) & ~31, ioaddr+SM_PTR);
1611 outw(data[0], ioaddr+SHADOW(CONF_MULTICAST+(6*i)));
1612 outw((CONF_MULTICAST+(6*i)+2) & ~31, ioaddr+SM_PTR);
1613 outw(data[1], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+2));
1614 outw((CONF_MULTICAST+(6*i)+4) & ~31, ioaddr+SM_PTR);
1615 outw(data[2], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+4));
1616 }
1617 }
1618
1619 /*
1620 * Set or clear the multicast filter for this adaptor.
1621 */
1622 static void
1623 eexp_set_multicast(struct net_device *dev)
1624 {
1625 unsigned short ioaddr = dev->base_addr;
1626 struct net_local *lp = netdev_priv(dev);
1627 int kick = 0, i;
1628 if ((dev->flags & IFF_PROMISC) != lp->was_promisc) {
1629 outw(CONF_PROMISC & ~31, ioaddr+SM_PTR);
1630 i = inw(ioaddr+SHADOW(CONF_PROMISC));
1631 outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1),
1632 ioaddr+SHADOW(CONF_PROMISC));
1633 lp->was_promisc = dev->flags & IFF_PROMISC;
1634 kick = 1;
1635 }
1636 if (!(dev->flags & IFF_PROMISC)) {
1637 eexp_setup_filter(dev);
1638 if (lp->old_mc_count != dev->mc_count) {
1639 kick = 1;
1640 lp->old_mc_count = dev->mc_count;
1641 }
1642 }
1643 if (kick) {
1644 unsigned long oj;
1645 scb_command(dev, SCB_CUsuspend);
1646 outb(0, ioaddr+SIGNAL_CA);
1647 outb(0, ioaddr+SIGNAL_CA);
1648 #if 0
1649 printk("%s: waiting for CU to go suspended\n", dev->name);
1650 #endif
1651 oj = jiffies;
1652 while ((SCB_CUstat(scb_status(dev)) == 2) &&
1653 (time_before(jiffies, oj + 2000)));
1654 if (SCB_CUstat(scb_status(dev)) == 2)
1655 printk("%s: warning, CU didn't stop\n", dev->name);
1656 lp->started &= ~(STARTED_CU);
1657 scb_wrcbl(dev, CONF_LINK);
1658 scb_command(dev, SCB_CUstart);
1659 outb(0, ioaddr+SIGNAL_CA);
1660 }
1661 }
1662
1663
1664 /*
1665 * MODULE stuff
1666 */
1667
1668 #ifdef MODULE
1669
1670 #define EEXP_MAX_CARDS 4 /* max number of cards to support */
1671
1672 static struct net_device *dev_eexp[EEXP_MAX_CARDS];
1673 static int irq[EEXP_MAX_CARDS];
1674 static int io[EEXP_MAX_CARDS];
1675
1676 module_param_array(io, int, NULL, 0);
1677 module_param_array(irq, int, NULL, 0);
1678 MODULE_PARM_DESC(io, "EtherExpress 16 I/O base address(es)");
1679 MODULE_PARM_DESC(irq, "EtherExpress 16 IRQ number(s)");
1680 MODULE_LICENSE("GPL");
1681
1682
1683 /* Ideally the user would give us io=, irq= for every card. If any parameters
1684 * are specified, we verify and then use them. If no parameters are given, we
1685 * autoprobe for one card only.
1686 */
1687 int __init init_module(void)
1688 {
1689 struct net_device *dev;
1690 int this_dev, found = 0;
1691
1692 for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) {
1693 dev = alloc_etherdev(sizeof(struct net_local));
1694 dev->irq = irq[this_dev];
1695 dev->base_addr = io[this_dev];
1696 if (io[this_dev] == 0) {
1697 if (this_dev)
1698 break;
1699 printk(KERN_NOTICE "eexpress.c: Module autoprobe not recommended, give io=xx.\n");
1700 }
1701 if (do_express_probe(dev) == 0) {
1702 dev_eexp[this_dev] = dev;
1703 found++;
1704 continue;
1705 }
1706 printk(KERN_WARNING "eexpress.c: Failed to register card at 0x%x.\n", io[this_dev]);
1707 free_netdev(dev);
1708 break;
1709 }
1710 if (found)
1711 return 0;
1712 return -ENXIO;
1713 }
1714
1715 void __exit cleanup_module(void)
1716 {
1717 int this_dev;
1718
1719 for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) {
1720 struct net_device *dev = dev_eexp[this_dev];
1721 if (dev) {
1722 unregister_netdev(dev);
1723 free_netdev(dev);
1724 }
1725 }
1726 }
1727 #endif
1728
1729 /*
1730 * Local Variables:
1731 * c-file-style: "linux"
1732 * tab-width: 8
1733 * End:
1734 */
Tomato firmware and modifications.