release/src-rt-6.x/linux/linux-2.6/drivers/mtd/maps/l440gx.c

   1 /*
   2  * $Id: l440gx.c,v 1.18 2005/11/07 11:14:27 gleixner Exp $
   3  *
   4  * BIOS Flash chip on Intel 440GX board.
   5  *
   6  * Bugs this currently does not work under linuxBIOS.
   7  */
   8
   9 #include <linux/module.h>
  10 #include <linux/pci.h>
  11 #include <linux/kernel.h>
  12 #include <linux/init.h>
  13 #include <asm/io.h>
  14 #include <linux/mtd/mtd.h>
  15 #include <linux/mtd/map.h>
  16
  17 #define PIIXE_IOBASE_RESOURCE   11
  18
  19 #define WINDOW_ADDR 0xfff00000
  20 #define WINDOW_SIZE 0x00100000
  21 #define BUSWIDTH 1
  22
  23 static u32 iobase;
  24 #define IOBASE iobase
  25 #define TRIBUF_PORT (IOBASE+0x37)
  26 #define VPP_PORT (IOBASE+0x28)
  27
  28 static struct mtd_info *mymtd;
  29
  30
  31 /* Is this really the vpp port? */
  32 static void l440gx_set_vpp(struct map_info *map, int vpp)
  33 {
  34         unsigned long l;
  35
  36         l = inl(VPP_PORT);
  37         if (vpp) {
  38                 l |= 1;
  39         } else {
  40                 l &= ~1;
  41         }
  42         outl(l, VPP_PORT);
  43 }
  44
  45 static struct map_info l440gx_map = {
  46         .name = "L440GX BIOS",
  47         .size = WINDOW_SIZE,
  48         .bankwidth = BUSWIDTH,
  49         .phys = WINDOW_ADDR,
  50 #if 0
  51         /* FIXME verify that this is the
  52          * appripriate code for vpp enable/disable
  53          */
  54         .set_vpp = l440gx_set_vpp
  55 #endif
  56 };
  57
  58 static int __init init_l440gx(void)
  59 {
  60         struct pci_dev *dev, *pm_dev;
  61         struct resource *pm_iobase;
  62         __u16 word;
  63
  64         dev = pci_get_device(PCI_VENDOR_ID_INTEL,
  65                 PCI_DEVICE_ID_INTEL_82371AB_0, NULL);
  66
  67         pm_dev = pci_get_device(PCI_VENDOR_ID_INTEL,
  68                 PCI_DEVICE_ID_INTEL_82371AB_3, NULL);
  69
  70         pci_dev_put(dev);
  71
  72         if (!dev || !pm_dev) {
  73                 printk(KERN_NOTICE "L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue\n");
  74                 pci_dev_put(pm_dev);
  75                 return -ENODEV;
  76         }
  77
  78         l440gx_map.virt = ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE);
  79
  80         if (!l440gx_map.virt) {
  81                 printk(KERN_WARNING "Failed to ioremap L440GX flash region\n");
  82                 pci_dev_put(pm_dev);
  83                 return -ENOMEM;
  84         }
  85         simple_map_init(&l440gx_map);
  86         printk(KERN_NOTICE "window_addr = 0x%08lx\n", (unsigned long)l440gx_map.virt);
  87
  88         /* Setup the pm iobase resource
  89          * This code should move into some kind of generic bridge
  90          * driver but for the moment I'm content with getting the
  91          * allocation correct.
  92          */
  93         pm_iobase = &pm_dev->resource[PIIXE_IOBASE_RESOURCE];
  94         if (!(pm_iobase->flags & IORESOURCE_IO)) {
  95                 pm_iobase->name = "pm iobase";
  96                 pm_iobase->start = 0;
  97                 pm_iobase->end = 63;
  98                 pm_iobase->flags = IORESOURCE_IO;
  99
 100                 /* Put the current value in the resource */
 101                 pci_read_config_dword(pm_dev, 0x40, &iobase);
 102                 iobase &= ~1;
 103                 pm_iobase->start += iobase & ~1;
 104                 pm_iobase->end += iobase & ~1;
 105
 106                 pci_dev_put(pm_dev);
 107
 108                 /* Allocate the resource region */
 109                 if (pci_assign_resource(pm_dev, PIIXE_IOBASE_RESOURCE) != 0) {
 110                         pci_dev_put(dev);
 111                         pci_dev_put(pm_dev);
 112                         printk(KERN_WARNING "Could not allocate pm iobase resource\n");
 113                         iounmap(l440gx_map.virt);
 114                         return -ENXIO;
 115                 }
 116         }
 117         /* Set the iobase */
 118         iobase = pm_iobase->start;
 119         pci_write_config_dword(pm_dev, 0x40, iobase | 1);
 120
 121
 122         /* Set XBCS# */
 123         pci_read_config_word(dev, 0x4e, &word);
 124         word |= 0x4;
 125         pci_write_config_word(dev, 0x4e, word);
 126
 127         /* Supply write voltage to the chip */
 128         l440gx_set_vpp(&l440gx_map, 1);
 129
 130         /* Enable the gate on the WE line */
 131         outb(inb(TRIBUF_PORT) & ~1, TRIBUF_PORT);
 132
 133         printk(KERN_NOTICE "Enabled WE line to L440GX BIOS flash chip.\n");
 134
 135         mymtd = do_map_probe("jedec_probe", &l440gx_map);
 136         if (!mymtd) {
 137                 printk(KERN_NOTICE "JEDEC probe on BIOS chip failed. Using ROM\n");
 138                 mymtd = do_map_probe("map_rom", &l440gx_map);
 139         }
 140         if (mymtd) {
 141                 mymtd->owner = THIS_MODULE;
 142
 143                 add_mtd_device(mymtd);
 144                 return 0;
 145         }
 146
 147         iounmap(l440gx_map.virt);
 148         return -ENXIO;
 149 }
 150
 151 static void __exit cleanup_l440gx(void)
 152 {
 153         del_mtd_device(mymtd);
 154         map_destroy(mymtd);
 155
 156         iounmap(l440gx_map.virt);
 157 }
 158
 159 module_init(init_l440gx);
 160 module_exit(cleanup_l440gx);
 161
 162 MODULE_LICENSE("GPL");
 163 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
 164 MODULE_DESCRIPTION("MTD map driver for BIOS chips on Intel L440GX motherboards");