release/src-rt-6.x/linux/linux-2.6/drivers/input/misc/ati_remote2.c

   1 /*
   2  * ati_remote2 - ATI/Philips USB RF remote driver
   3  *
   4  * Copyright (C) 2005 Ville Syrjala <syrjala@sci.fi>
   5  * Copyright (C) 2007 Peter Stokes <linux@dadeos.freeserve.co.uk>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2
   9  * as published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/usb/input.h>
  13
  14 #define DRIVER_DESC    "ATI/Philips USB RF remote driver"
  15 #define DRIVER_VERSION "0.2"
  16
  17 MODULE_DESCRIPTION(DRIVER_DESC);
  18 MODULE_VERSION(DRIVER_VERSION);
  19 MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
  20 MODULE_LICENSE("GPL");
  21
  22 /*
  23  * ATI Remote Wonder II Channel Configuration
  24  *
  25  * The remote control can by assigned one of sixteen "channels" in order to facilitate
  26  * the use of multiple remote controls within range of each other.
  27  * A remote's "channel" may be altered by pressing and holding the "PC" button for
  28  * approximately 3 seconds, after which the button will slowly flash the count of the
  29  * currently configured "channel", using the numeric keypad enter a number between 1 and
  30  * 16 and then the "PC" button again, the button will slowly flash the count of the
  31  * newly configured "channel".
  32  */
  33
  34 static unsigned int channel_mask = 0xFFFF;
  35 module_param(channel_mask, uint, 0644);
  36 MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
  37
  38 static unsigned int mode_mask = 0x1F;
  39 module_param(mode_mask, uint, 0644);
  40 MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
  41
  42 static struct usb_device_id ati_remote2_id_table[] = {
  43         { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */
  44         { }
  45 };
  46 MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
  47
  48 static struct {
  49         int hw_code;
  50         int key_code;
  51 } ati_remote2_key_table[] = {
  52         { 0x00, KEY_0 },
  53         { 0x01, KEY_1 },
  54         { 0x02, KEY_2 },
  55         { 0x03, KEY_3 },
  56         { 0x04, KEY_4 },
  57         { 0x05, KEY_5 },
  58         { 0x06, KEY_6 },
  59         { 0x07, KEY_7 },
  60         { 0x08, KEY_8 },
  61         { 0x09, KEY_9 },
  62         { 0x0c, KEY_POWER },
  63         { 0x0d, KEY_MUTE },
  64         { 0x10, KEY_VOLUMEUP },
  65         { 0x11, KEY_VOLUMEDOWN },
  66         { 0x20, KEY_CHANNELUP },
  67         { 0x21, KEY_CHANNELDOWN },
  68         { 0x28, KEY_FORWARD },
  69         { 0x29, KEY_REWIND },
  70         { 0x2c, KEY_PLAY },
  71         { 0x30, KEY_PAUSE },
  72         { 0x31, KEY_STOP },
  73         { 0x37, KEY_RECORD },
  74         { 0x38, KEY_DVD },
  75         { 0x39, KEY_TV },
  76         { 0x54, KEY_MENU },
  77         { 0x58, KEY_UP },
  78         { 0x59, KEY_DOWN },
  79         { 0x5a, KEY_LEFT },
  80         { 0x5b, KEY_RIGHT },
  81         { 0x5c, KEY_OK },
  82         { 0x78, KEY_A },
  83         { 0x79, KEY_B },
  84         { 0x7a, KEY_C },
  85         { 0x7b, KEY_D },
  86         { 0x7c, KEY_E },
  87         { 0x7d, KEY_F },
  88         { 0x82, KEY_ENTER },
  89         { 0x8e, KEY_VENDOR },
  90         { 0x96, KEY_COFFEE },
  91         { 0xa9, BTN_LEFT },
  92         { 0xaa, BTN_RIGHT },
  93         { 0xbe, KEY_QUESTION },
  94         { 0xd5, KEY_FRONT },
  95         { 0xd0, KEY_EDIT },
  96         { 0xf9, KEY_INFO },
  97         { (0x00 << 8) | 0x3f, KEY_PROG1 },
  98         { (0x01 << 8) | 0x3f, KEY_PROG2 },
  99         { (0x02 << 8) | 0x3f, KEY_PROG3 },
 100         { (0x03 << 8) | 0x3f, KEY_PROG4 },
 101         { (0x04 << 8) | 0x3f, KEY_PC },
 102         { 0, KEY_RESERVED }
 103 };
 104
 105 struct ati_remote2 {
 106         struct input_dev *idev;
 107         struct usb_device *udev;
 108
 109         struct usb_interface *intf[2];
 110         struct usb_endpoint_descriptor *ep[2];
 111         struct urb *urb[2];
 112         void *buf[2];
 113         dma_addr_t buf_dma[2];
 114
 115         unsigned long jiffies;
 116         int mode;
 117
 118         char name[64];
 119         char phys[64];
 120 };
 121
 122 static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
 123 static void ati_remote2_disconnect(struct usb_interface *interface);
 124
 125 static struct usb_driver ati_remote2_driver = {
 126         .name       = "ati_remote2",
 127         .probe      = ati_remote2_probe,
 128         .disconnect = ati_remote2_disconnect,
 129         .id_table   = ati_remote2_id_table,
 130 };
 131
 132 static int ati_remote2_open(struct input_dev *idev)
 133 {
 134         struct ati_remote2 *ar2 = input_get_drvdata(idev);
 135         int r;
 136
 137         r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
 138         if (r) {
 139                 dev_err(&ar2->intf[0]->dev,
 140                         "%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
 141                 return r;
 142         }
 143         r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
 144         if (r) {
 145                 usb_kill_urb(ar2->urb[0]);
 146                 dev_err(&ar2->intf[1]->dev,
 147                         "%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
 148                 return r;
 149         }
 150
 151         return 0;
 152 }
 153
 154 static void ati_remote2_close(struct input_dev *idev)
 155 {
 156         struct ati_remote2 *ar2 = input_get_drvdata(idev);
 157
 158         usb_kill_urb(ar2->urb[0]);
 159         usb_kill_urb(ar2->urb[1]);
 160 }
 161
 162 static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
 163 {
 164         struct input_dev *idev = ar2->idev;
 165         u8 *data = ar2->buf[0];
 166         int channel, mode;
 167
 168         channel = data[0] >> 4;
 169
 170         if (!((1 << channel) & channel_mask))
 171                 return;
 172
 173         mode = data[0] & 0x0F;
 174
 175         if (mode > 4) {
 176                 dev_err(&ar2->intf[0]->dev,
 177                         "Unknown mode byte (%02x %02x %02x %02x)\n",
 178                         data[3], data[2], data[1], data[0]);
 179                 return;
 180         }
 181
 182         if (!((1 << mode) & mode_mask))
 183                 return;
 184
 185         input_event(idev, EV_REL, REL_X, (s8) data[1]);
 186         input_event(idev, EV_REL, REL_Y, (s8) data[2]);
 187         input_sync(idev);
 188 }
 189
 190 static int ati_remote2_lookup(unsigned int hw_code)
 191 {
 192         int i;
 193
 194         for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
 195                 if (ati_remote2_key_table[i].hw_code == hw_code)
 196                         return i;
 197
 198         return -1;
 199 }
 200
 201 static void ati_remote2_input_key(struct ati_remote2 *ar2)
 202 {
 203         struct input_dev *idev = ar2->idev;
 204         u8 *data = ar2->buf[1];
 205         int channel, mode, hw_code, index;
 206
 207         channel = data[0] >> 4;
 208
 209         if (!((1 << channel) & channel_mask))
 210                 return;
 211
 212         mode = data[0] & 0x0F;
 213
 214         if (mode > 4) {
 215                 dev_err(&ar2->intf[1]->dev,
 216                         "Unknown mode byte (%02x %02x %02x %02x)\n",
 217                         data[3], data[2], data[1], data[0]);
 218                 return;
 219         }
 220
 221         hw_code = data[2];
 222         /*
 223          * Mode keys (AUX1-AUX4, PC) all generate the same code byte.
 224          * Use the mode byte to figure out which one was pressed.
 225          */
 226         if (hw_code == 0x3f) {
 227                 /*
 228                  * For some incomprehensible reason the mouse pad generates
 229                  * events which look identical to the events from the last
 230                  * pressed mode key. Naturally we don't want to generate key
 231                  * events for the mouse pad so we filter out any subsequent
 232                  * events from the same mode key.
 233                  */
 234                 if (ar2->mode == mode)
 235                         return;
 236
 237                 if (data[1] == 0)
 238                         ar2->mode = mode;
 239
 240                 hw_code |= mode << 8;
 241         }
 242
 243         if (!((1 << mode) & mode_mask))
 244                 return;
 245
 246         index = ati_remote2_lookup(hw_code);
 247         if (index < 0) {
 248                 dev_err(&ar2->intf[1]->dev,
 249                         "Unknown code byte (%02x %02x %02x %02x)\n",
 250                         data[3], data[2], data[1], data[0]);
 251                 return;
 252         }
 253
 254         switch (data[1]) {
 255         case 0: /* release */
 256                 break;
 257         case 1: /* press */
 258                 ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
 259                 break;
 260         case 2: /* repeat */
 261
 262                 /* No repeat for mouse buttons. */
 263                 if (ati_remote2_key_table[index].key_code == BTN_LEFT ||
 264                     ati_remote2_key_table[index].key_code == BTN_RIGHT)
 265                         return;
 266
 267                 if (!time_after_eq(jiffies, ar2->jiffies))
 268                         return;
 269
 270                 ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]);
 271                 break;
 272         default:
 273                 dev_err(&ar2->intf[1]->dev,
 274                         "Unknown state byte (%02x %02x %02x %02x)\n",
 275                         data[3], data[2], data[1], data[0]);
 276                 return;
 277         }
 278
 279         input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]);
 280         input_sync(idev);
 281 }
 282
 283 static void ati_remote2_complete_mouse(struct urb *urb)
 284 {
 285         struct ati_remote2 *ar2 = urb->context;
 286         int r;
 287
 288         switch (urb->status) {
 289         case 0:
 290                 ati_remote2_input_mouse(ar2);
 291                 break;
 292         case -ENOENT:
 293         case -EILSEQ:
 294         case -ECONNRESET:
 295         case -ESHUTDOWN:
 296                 dev_dbg(&ar2->intf[0]->dev,
 297                         "%s(): urb status = %d\n", __FUNCTION__, urb->status);
 298                 return;
 299         default:
 300                 dev_err(&ar2->intf[0]->dev,
 301                         "%s(): urb status = %d\n", __FUNCTION__, urb->status);
 302         }
 303
 304         r = usb_submit_urb(urb, GFP_ATOMIC);
 305         if (r)
 306                 dev_err(&ar2->intf[0]->dev,
 307                         "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
 308 }
 309
 310 static void ati_remote2_complete_key(struct urb *urb)
 311 {
 312         struct ati_remote2 *ar2 = urb->context;
 313         int r;
 314
 315         switch (urb->status) {
 316         case 0:
 317                 ati_remote2_input_key(ar2);
 318                 break;
 319         case -ENOENT:
 320         case -EILSEQ:
 321         case -ECONNRESET:
 322         case -ESHUTDOWN:
 323                 dev_dbg(&ar2->intf[1]->dev,
 324                         "%s(): urb status = %d\n", __FUNCTION__, urb->status);
 325                 return;
 326         default:
 327                 dev_err(&ar2->intf[1]->dev,
 328                         "%s(): urb status = %d\n", __FUNCTION__, urb->status);
 329         }
 330
 331         r = usb_submit_urb(urb, GFP_ATOMIC);
 332         if (r)
 333                 dev_err(&ar2->intf[1]->dev,
 334                         "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
 335 }
 336
 337 static int ati_remote2_input_init(struct ati_remote2 *ar2)
 338 {
 339         struct input_dev *idev;
 340         int i, retval;
 341
 342         idev = input_allocate_device();
 343         if (!idev)
 344                 return -ENOMEM;
 345
 346         ar2->idev = idev;
 347         input_set_drvdata(idev, ar2);
 348
 349         idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
 350         idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
 351                 BIT_MASK(BTN_RIGHT);
 352         idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
 353         for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
 354                 set_bit(ati_remote2_key_table[i].key_code, idev->keybit);
 355
 356         idev->rep[REP_DELAY]  = 250;
 357         idev->rep[REP_PERIOD] = 33;
 358
 359         idev->open = ati_remote2_open;
 360         idev->close = ati_remote2_close;
 361
 362         idev->name = ar2->name;
 363         idev->phys = ar2->phys;
 364
 365         usb_to_input_id(ar2->udev, &idev->id);
 366         idev->dev.parent = &ar2->udev->dev;
 367
 368         retval = input_register_device(idev);
 369         if (retval)
 370                 input_free_device(idev);
 371
 372         return retval;
 373 }
 374
 375 static int ati_remote2_urb_init(struct ati_remote2 *ar2)
 376 {
 377         struct usb_device *udev = ar2->udev;
 378         int i, pipe, maxp;
 379
 380         for (i = 0; i < 2; i++) {
 381                 ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
 382                 if (!ar2->buf[i])
 383                         return -ENOMEM;
 384
 385                 ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
 386                 if (!ar2->urb[i])
 387                         return -ENOMEM;
 388
 389                 pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
 390                 maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
 391                 maxp = maxp > 4 ? 4 : maxp;
 392
 393                 usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
 394                                  i ? ati_remote2_complete_key : ati_remote2_complete_mouse,
 395                                  ar2, ar2->ep[i]->bInterval);
 396                 ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
 397                 ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 398         }
 399
 400         return 0;
 401 }
 402
 403 static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
 404 {
 405         int i;
 406
 407         for (i = 0; i < 2; i++) {
 408                 usb_free_urb(ar2->urb[i]);
 409                 usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
 410         }
 411 }
 412
 413 static int ati_remote2_setup(struct ati_remote2 *ar2)
 414 {
 415         int r, i, channel;
 416
 417         /*
 418          * Configure receiver to only accept input from remote "channel"
 419          *  channel == 0  -> Accept input from any remote channel
 420          *  channel == 1  -> Only accept input from remote channel 1
 421          *  channel == 2  -> Only accept input from remote channel 2
 422          *  ...
 423          *  channel == 16 -> Only accept input from remote channel 16
 424          */
 425
 426         channel = 0;
 427         for (i = 0; i < 16; i++) {
 428                 if ((1 << i) & channel_mask) {
 429                         if (!(~(1 << i) & 0xFFFF & channel_mask))
 430                                 channel = i + 1;
 431                         break;
 432                 }
 433         }
 434
 435         r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
 436                             0x20,
 437                             USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
 438                             channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
 439         if (r) {
 440                 dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
 441                         __FUNCTION__, r);
 442                 return r;
 443         }
 444
 445         return 0;
 446 }
 447
 448 static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
 449 {
 450         struct usb_device *udev = interface_to_usbdev(interface);
 451         struct usb_host_interface *alt = interface->cur_altsetting;
 452         struct ati_remote2 *ar2;
 453         int r;
 454
 455         if (alt->desc.bInterfaceNumber)
 456                 return -ENODEV;
 457
 458         ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
 459         if (!ar2)
 460                 return -ENOMEM;
 461
 462         ar2->udev = udev;
 463
 464         ar2->intf[0] = interface;
 465         ar2->ep[0] = &alt->endpoint[0].desc;
 466
 467         ar2->intf[1] = usb_ifnum_to_if(udev, 1);
 468         r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
 469         if (r)
 470                 goto fail1;
 471         alt = ar2->intf[1]->cur_altsetting;
 472         ar2->ep[1] = &alt->endpoint[0].desc;
 473
 474         r = ati_remote2_urb_init(ar2);
 475         if (r)
 476                 goto fail2;
 477
 478         r = ati_remote2_setup(ar2);
 479         if (r)
 480                 goto fail2;
 481
 482         usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
 483         strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
 484
 485         strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
 486
 487         r = ati_remote2_input_init(ar2);
 488         if (r)
 489                 goto fail2;
 490
 491         usb_set_intfdata(interface, ar2);
 492
 493         return 0;
 494
 495  fail2:
 496         ati_remote2_urb_cleanup(ar2);
 497
 498         usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
 499  fail1:
 500         kfree(ar2);
 501
 502         return r;
 503 }
 504
 505 static void ati_remote2_disconnect(struct usb_interface *interface)
 506 {
 507         struct ati_remote2 *ar2;
 508         struct usb_host_interface *alt = interface->cur_altsetting;
 509
 510         if (alt->desc.bInterfaceNumber)
 511                 return;
 512
 513         ar2 = usb_get_intfdata(interface);
 514         usb_set_intfdata(interface, NULL);
 515
 516         input_unregister_device(ar2->idev);
 517
 518         ati_remote2_urb_cleanup(ar2);
 519
 520         usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
 521
 522         kfree(ar2);
 523 }
 524
 525 static int __init ati_remote2_init(void)
 526 {
 527         int r;
 528
 529         r = usb_register(&ati_remote2_driver);
 530         if (r)
 531                 printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r);
 532         else
 533                 printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n");
 534
 535         return r;
 536 }
 537
 538 static void __exit ati_remote2_exit(void)
 539 {
 540         usb_deregister(&ati_remote2_driver);
 541 }
 542
 543 module_init(ati_remote2_init);
 544 module_exit(ati_remote2_exit);