RT-AC66 3.0.0.4.374.130 core

[tomato.git] / release / src-rt-6.x / linux / linux-2.6 / drivers / ide / pci / piix.c

/*
 *  linux/drivers/ide/pci/piix.c        Version 0.47    February 8, 2007
 *
 *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
 *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
 *  Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
 *  Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
 *
 *  May be copied or modified under the terms of the GNU General Public License
 *
 *  PIO mode setting function for Intel chipsets.
 *  For use instead of BIOS settings.
 *
 * 40-41
 * 42-43
 * 
 *                 41
 *                 43
 *
 * | PIO 0       | c0 | 80 | 0 |        piix_tune_drive(drive, 0);
 * | PIO 2 | SW2 | d0 | 90 | 4 |        piix_tune_drive(drive, 2);
 * | PIO 3 | MW1 | e1 | a1 | 9 |        piix_tune_drive(drive, 3);
 * | PIO 4 | MW2 | e3 | a3 | b |        piix_tune_drive(drive, 4);
 * 
 * sitre = word40 & 0x4000; primary
 * sitre = word42 & 0x4000; secondary
 *
 * 44 8421|8421    hdd|hdb
 *
 * 48 8421         hdd|hdc|hdb|hda udma enabled
 *
 *    0001         hda
 *    0010         hdb
 *    0100         hdc
 *    1000         hdd
 *
 * 4a 84|21        hdb|hda
 * 4b 84|21        hdd|hdc
 *
 *    ata-33/82371AB
 *    ata-33/82371EB
 *    ata-33/82801AB            ata-66/82801AA
 *    00|00 udma 0              00|00 reserved
 *    01|01 udma 1              01|01 udma 3
 *    10|10 udma 2              10|10 udma 4
 *    11|11 reserved            11|11 reserved
 *
 * 54 8421|8421    ata66 drive|ata66 enable
 *
 * pci_read_config_word(HWIF(drive)->pci_dev, 0x40, &reg40);
 * pci_read_config_word(HWIF(drive)->pci_dev, 0x42, &reg42);
 * pci_read_config_word(HWIF(drive)->pci_dev, 0x44, &reg44);
 * pci_read_config_byte(HWIF(drive)->pci_dev, 0x48, &reg48);
 * pci_read_config_word(HWIF(drive)->pci_dev, 0x4a, &reg4a);
 * pci_read_config_byte(HWIF(drive)->pci_dev, 0x54, &reg54);
 *
 * Documentation
 *      Publically available from Intel web site. Errata documentation
 * is also publically available. As an aide to anyone hacking on this
 * driver the list of errata that are relevant is below.going back to
 * PIIX4. Older device documentation is now a bit tricky to find.
 *
 * Errata of note:
 *
 * Unfixable
 *      PIIX4    errata #9      - Only on ultra obscure hw
 *      ICH3     errata #13     - Not observed to affect real hw
 *                                by Intel
 *
 * Things we must deal with
 *      PIIX4   errata #10      - BM IDE hang with non UDMA
 *                                (must stop/start dma to recover)
 *      440MX   errata #15      - As PIIX4 errata #10
 *      PIIX4   errata #15      - Must not read control registers
 *                                during a PIO transfer
 *      440MX   errata #13      - As PIIX4 errata #15
 *      ICH2    errata #21      - DMA mode 0 doesn't work right
 *      ICH0/1  errata #55      - As ICH2 errata #21
 *      ICH2    spec c #9       - Extra operations needed to handle
 *                                drive hotswap [NOT YET SUPPORTED]
 *      ICH2    spec c #20      - IDE PRD must not cross a 64K boundary
 *                                and must be dword aligned
 *      ICH2    spec c #24      - UDMA mode 4,5 t85/86 should be 6ns not 3.3
 *
 * Should have been BIOS fixed:
 *      450NX:  errata #19      - DMA hangs on old 450NX
 *      450NX:  errata #20      - DMA hangs on old 450NX
 *      450NX:  errata #25      - Corruption with DMA on old 450NX
 *      ICH3    errata #15      - IDE deadlock under high load
 *                                (BIOS must set dev 31 fn 0 bit 23)
 *      ICH3    errata #18      - Don't use native mode
 */

#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/delay.h>
#include <linux/init.h>

#include <asm/io.h>

static int no_piix_dma;

/**
 *      piix_dma_2_pio          -       return the PIO mode matching DMA
 *      @xfer_rate: transfer speed
 *
 *      Returns the nearest equivalent PIO timing for the PIO or DMA
 *      mode requested by the controller.
 */
 
static u8 piix_dma_2_pio (u8 xfer_rate) {
        switch(xfer_rate) {
                case XFER_UDMA_6:
                case XFER_UDMA_5:
                case XFER_UDMA_4:
                case XFER_UDMA_3:
                case XFER_UDMA_2:
                case XFER_UDMA_1:
                case XFER_UDMA_0:
                case XFER_MW_DMA_2:
                case XFER_PIO_4:
                        return 4;
                case XFER_MW_DMA_1:
                case XFER_PIO_3:
                        return 3;
                case XFER_SW_DMA_2:
                case XFER_PIO_2:
                        return 2;
                case XFER_MW_DMA_0:
                case XFER_SW_DMA_1:
                case XFER_SW_DMA_0:
                case XFER_PIO_1:
                case XFER_PIO_0:
                case XFER_PIO_SLOW:
                default:
                        return 0;
        }
}

/**
 *      piix_tune_pio           -       tune PIIX for PIO mode
 *      @drive: drive to tune
 *      @pio: desired PIO mode
 *
 *      Set the interface PIO mode based upon the settings done by AMI BIOS.
 */
static void piix_tune_pio (ide_drive_t *drive, u8 pio)
{
        ide_hwif_t *hwif        = HWIF(drive);
        struct pci_dev *dev     = hwif->pci_dev;
        int is_slave            = drive->dn & 1;
        int master_port         = hwif->channel ? 0x42 : 0x40;
        int slave_port          = 0x44;
        unsigned long flags;
        u16 master_data;
        u8 slave_data;
        static DEFINE_SPINLOCK(tune_lock);
        int control = 0;

                                     /* ISP  RTC */
        static const u8 timings[][2]= {
                                        { 0, 0 },
                                        { 0, 0 },
                                        { 1, 0 },
                                        { 2, 1 },
                                        { 2, 3 }, };

        /*
         * Master vs slave is synchronized above us but the slave register is
         * shared by the two hwifs so the corner case of two slave timeouts in
         * parallel must be locked.
         */
        spin_lock_irqsave(&tune_lock, flags);
        pci_read_config_word(dev, master_port, &master_data);

        if (pio > 1)
                control |= 1;   /* Programmable timing on */
        if (drive->media == ide_disk)
                control |= 4;   /* Prefetch, post write */
        if (pio > 2)
                control |= 2;   /* IORDY */
        if (is_slave) {
                master_data |=  0x4000;
                master_data &= ~0x0070;
                if (pio > 1) {
                        /* Set PPE, IE and TIME */
                        master_data |= control << 4;
                }
                pci_read_config_byte(dev, slave_port, &slave_data);
                slave_data &= hwif->channel ? 0x0f : 0xf0;
                slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
                               (hwif->channel ? 4 : 0);
        } else {
                master_data &= ~0x3307;
                if (pio > 1) {
                        /* enable PPE, IE and TIME */
                        master_data |= control;
                }
                master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
        }
        pci_write_config_word(dev, master_port, master_data);
        if (is_slave)
                pci_write_config_byte(dev, slave_port, slave_data);
        spin_unlock_irqrestore(&tune_lock, flags);
}

/**
 *      piix_tune_drive         -       tune a drive attached to PIIX
 *      @drive: drive to tune
 *      @pio: desired PIO mode
 *
 *      Set the drive's PIO mode (might be useful if drive is not registered
 *      in CMOS for any reason).
 */
static void piix_tune_drive (ide_drive_t *drive, u8 pio)
{
        pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
        piix_tune_pio(drive, pio);
        (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}

/**
 *      piix_tune_chipset       -       tune a PIIX interface
 *      @drive: IDE drive to tune
 *      @xferspeed: speed to configure
 *
 *      Set a PIIX interface channel to the desired speeds. This involves
 *      requires the right timing data into the PIIX configuration space
 *      then setting the drive parameters appropriately
 */
 
static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed)
{
        ide_hwif_t *hwif        = HWIF(drive);
        struct pci_dev *dev     = hwif->pci_dev;
        u8 maslave              = hwif->channel ? 0x42 : 0x40;
        u8 speed                = ide_rate_filter(drive, xferspeed);
        int a_speed             = 3 << (drive->dn * 4);
        int u_flag              = 1 << drive->dn;
        int v_flag              = 0x01 << drive->dn;
        int w_flag              = 0x10 << drive->dn;
        int u_speed             = 0;
        int                     sitre;
        u16                     reg4042, reg4a;
        u8                      reg48, reg54, reg55;

        pci_read_config_word(dev, maslave, &reg4042);
        sitre = (reg4042 & 0x4000) ? 1 : 0;
        pci_read_config_byte(dev, 0x48, &reg48);
        pci_read_config_word(dev, 0x4a, &reg4a);
        pci_read_config_byte(dev, 0x54, &reg54);
        pci_read_config_byte(dev, 0x55, &reg55);

        switch(speed) {
                case XFER_UDMA_4:
                case XFER_UDMA_2:       u_speed = 2 << (drive->dn * 4); break;
                case XFER_UDMA_5:
                case XFER_UDMA_3:
                case XFER_UDMA_1:       u_speed = 1 << (drive->dn * 4); break;
                case XFER_UDMA_0:       u_speed = 0 << (drive->dn * 4); break;
                case XFER_MW_DMA_2:
                case XFER_MW_DMA_1:
                case XFER_SW_DMA_2:     break;
                case XFER_PIO_4:
                case XFER_PIO_3:
                case XFER_PIO_2:
                case XFER_PIO_0:        break;
                default:                return -1;
        }

        if (speed >= XFER_UDMA_0) {
                if (!(reg48 & u_flag))
                        pci_write_config_byte(dev, 0x48, reg48 | u_flag);
                if (speed == XFER_UDMA_5) {
                        pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag);
                } else {
                        pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
                }
                if ((reg4a & a_speed) != u_speed)
                        pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
                if (speed > XFER_UDMA_2) {
                        if (!(reg54 & v_flag))
                                pci_write_config_byte(dev, 0x54, reg54 | v_flag);
                } else
                        pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
        } else {
                if (reg48 & u_flag)
                        pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
                if (reg4a & a_speed)
                        pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
                if (reg54 & v_flag)
                        pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
                if (reg55 & w_flag)
                        pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
        }

        piix_tune_pio(drive, piix_dma_2_pio(speed));
        return ide_config_drive_speed(drive, speed);
}

/**
 *      piix_config_drive_xfer_rate     -       set up an IDE device
 *      @drive: IDE drive to configure
 *
 *      Set up the PIIX interface for the best available speed on this
 *      interface, preferring DMA to PIO.
 */
 
static int piix_config_drive_xfer_rate (ide_drive_t *drive)
{
        drive->init_speed = 0;

        if (ide_tune_dma(drive))
                return 0;

        if (ide_use_fast_pio(drive))
                piix_tune_drive(drive, 255);

        return -1;
}

/**
 *      piix_is_ichx    -       check if ICHx
 *      @dev: PCI device to check
 *
 *      returns 1 if ICHx, 0 otherwise.
 */
static int piix_is_ichx(struct pci_dev *dev)
{
        switch (dev->device) {
                case PCI_DEVICE_ID_INTEL_82801EB_1:
                case PCI_DEVICE_ID_INTEL_82801AA_1:
                case PCI_DEVICE_ID_INTEL_82801AB_1:
                case PCI_DEVICE_ID_INTEL_82801BA_8:
                case PCI_DEVICE_ID_INTEL_82801BA_9:
                case PCI_DEVICE_ID_INTEL_82801CA_10:
                case PCI_DEVICE_ID_INTEL_82801CA_11:
                case PCI_DEVICE_ID_INTEL_82801DB_1:
                case PCI_DEVICE_ID_INTEL_82801DB_10:
                case PCI_DEVICE_ID_INTEL_82801DB_11:
                case PCI_DEVICE_ID_INTEL_82801EB_11:
                case PCI_DEVICE_ID_INTEL_82801E_11:
                case PCI_DEVICE_ID_INTEL_ESB_2:
                case PCI_DEVICE_ID_INTEL_ICH6_19:
                case PCI_DEVICE_ID_INTEL_ICH7_21:
                case PCI_DEVICE_ID_INTEL_ESB2_18:
                case PCI_DEVICE_ID_INTEL_ICH8_6:
                        return 1;
        }

        return 0;
}

/**
 *      init_chipset_piix       -       set up the PIIX chipset
 *      @dev: PCI device to set up
 *      @name: Name of the device
 *
 *      Initialize the PCI device as required. For the PIIX this turns
 *      out to be nice and simple
 */

static unsigned int __devinit init_chipset_piix (struct pci_dev *dev, const char *name)
{
        if (piix_is_ichx(dev)) {
                unsigned int extra = 0;
                pci_read_config_dword(dev, 0x54, &extra);
                pci_write_config_dword(dev, 0x54, extra|0x400);
        }

        return 0;
}

/**
 *      piix_dma_clear_irq      -       clear BMDMA status
 *      @drive: IDE drive to clear
 *
 *      Called from ide_intr() for PIO interrupts
 *      to clear BMDMA status as needed by ICHx
 */
static void piix_dma_clear_irq(ide_drive_t *drive)
{
        ide_hwif_t *hwif = HWIF(drive);
        u8 dma_stat;

        /* clear the INTR & ERROR bits */
        dma_stat = hwif->INB(hwif->dma_status);
        /* Should we force the bit as well ? */
        hwif->OUTB(dma_stat, hwif->dma_status);
}

static int __devinit piix_cable_detect(ide_hwif_t *hwif)
{
        struct pci_dev *dev = hwif->pci_dev;
        u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30;

        pci_read_config_byte(dev, 0x54, &reg54h);

        return (reg54h & mask) ? 1 : 0;
}

/**
 *      init_hwif_piix          -       fill in the hwif for the PIIX
 *      @hwif: IDE interface
 *
 *      Set up the ide_hwif_t for the PIIX interface according to the
 *      capabilities of the hardware.
 */

static void __devinit init_hwif_piix(ide_hwif_t *hwif)
{
#ifndef CONFIG_IA64
        if (!hwif->irq)
                hwif->irq = hwif->channel ? 15 : 14;
#endif /* CONFIG_IA64 */

        if (hwif->pci_dev->device == PCI_DEVICE_ID_INTEL_82371MX) {
                /* This is a painful system best to let it self tune for now */
                return;
        }

        hwif->autodma = 0;
        hwif->tuneproc = &piix_tune_drive;
        hwif->speedproc = &piix_tune_chipset;
        hwif->drives[0].autotune = 1;
        hwif->drives[1].autotune = 1;

        if (!hwif->dma_base)
                return;

        /* ICHx need to clear the bmdma status for all interrupts */
        if (piix_is_ichx(hwif->pci_dev))
                hwif->ide_dma_clear_irq = &piix_dma_clear_irq;

        hwif->atapi_dma = 1;

        hwif->ultra_mask = hwif->cds->udma_mask;
        hwif->mwdma_mask = 0x06;
        hwif->swdma_mask = 0x04;

        if (hwif->ultra_mask & 0x78) {
                if (!hwif->udma_four)
                        hwif->udma_four = piix_cable_detect(hwif);
        }

        if (no_piix_dma)
                hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0;

        hwif->ide_dma_check = &piix_config_drive_xfer_rate;
        if (!noautodma)
                hwif->autodma = 1;

        hwif->drives[1].autodma = hwif->autodma;
        hwif->drives[0].autodma = hwif->autodma;
}

#define DECLARE_PIIX_DEV(name_str, udma) \
        {                                               \
                .name           = name_str,             \
                .init_chipset   = init_chipset_piix,    \
                .init_hwif      = init_hwif_piix,       \
                .channels       = 2,                    \
                .autodma        = AUTODMA,              \
                .enablebits     = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
                .bootable       = ON_BOARD,             \
                .udma_mask      = udma,                 \
        }

static ide_pci_device_t piix_pci_info[] __devinitdata = {
        /*  0 */ DECLARE_PIIX_DEV("PIIXa", 0x00),       /* no udma */
        /*  1 */ DECLARE_PIIX_DEV("PIIXb", 0x00),       /* no udma */

        /*  2 */
        {       /*
                 * MPIIX actually has only a single IDE channel mapped to
                 * the primary or secondary ports depending on the value
                 * of the bit 14 of the IDETIM register at offset 0x6c
                 */
                .name           = "MPIIX",
                .init_hwif      = init_hwif_piix,
                .channels       = 2,
                .autodma        = NODMA,
                .enablebits     = {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}},
                .bootable       = ON_BOARD,
                .flags          = IDEPCI_FLAG_ISA_PORTS
        },

        /*  3 */ DECLARE_PIIX_DEV("PIIX3", 0x00),       /* no udma */
        /*  4 */ DECLARE_PIIX_DEV("PIIX4", 0x07),       /* udma0-2 */
        /*  5 */ DECLARE_PIIX_DEV("ICH0",  0x07),       /* udma0-2 */
        /*  6 */ DECLARE_PIIX_DEV("PIIX4", 0x07),       /* udma0-2 */
        /*  7 */ DECLARE_PIIX_DEV("ICH",   0x1f),       /* udma0-4 */
        /*  8 */ DECLARE_PIIX_DEV("PIIX4", 0x1f),       /* udma0-4 */
        /*  9 */ DECLARE_PIIX_DEV("PIIX4", 0x07),       /* udma0-2 */
        /* 10 */ DECLARE_PIIX_DEV("ICH2",  0x3f),       /* udma0-5 */
        /* 11 */ DECLARE_PIIX_DEV("ICH2M", 0x3f),       /* udma0-5 */
        /* 12 */ DECLARE_PIIX_DEV("ICH3M", 0x3f),       /* udma0-5 */
        /* 13 */ DECLARE_PIIX_DEV("ICH3",  0x3f),       /* udma0-5 */
        /* 14 */ DECLARE_PIIX_DEV("ICH4",  0x3f),       /* udma0-5 */
        /* 15 */ DECLARE_PIIX_DEV("ICH5",  0x3f),       /* udma0-5 */
        /* 16 */ DECLARE_PIIX_DEV("C-ICH", 0x3f),       /* udma0-5 */
        /* 17 */ DECLARE_PIIX_DEV("ICH4",  0x3f),       /* udma0-5 */
        /* 18 */ DECLARE_PIIX_DEV("ICH5-SATA", 0x3f),   /* udma0-5 */
        /* 19 */ DECLARE_PIIX_DEV("ICH5",  0x3f),       /* udma0-5 */
        /* 20 */ DECLARE_PIIX_DEV("ICH6",  0x3f),       /* udma0-5 */
        /* 21 */ DECLARE_PIIX_DEV("ICH7",  0x3f),       /* udma0-5 */
        /* 22 */ DECLARE_PIIX_DEV("ICH4",  0x3f),       /* udma0-5 */
        /* 23 */ DECLARE_PIIX_DEV("ESB2",  0x3f),       /* udma0-5 */
        /* 24 */ DECLARE_PIIX_DEV("ICH8M", 0x3f),       /* udma0-5 */
};

/**
 *      piix_init_one   -       called when a PIIX is found
 *      @dev: the piix device
 *      @id: the matching pci id
 *
 *      Called when the PCI registration layer (or the IDE initialization)
 *      finds a device matching our IDE device tables.
 */
 
static int __devinit piix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
        ide_pci_device_t *d = &piix_pci_info[id->driver_data];

        return ide_setup_pci_device(dev, d);
}

/**
 *      piix_check_450nx        -       Check for problem 450NX setup
 *      
 *      Check for the present of 450NX errata #19 and errata #25. If
 *      they are found, disable use of DMA IDE
 */

static void __devinit piix_check_450nx(void)
{
        struct pci_dev *pdev = NULL;
        u16 cfg;
        u8 rev;
        while((pdev=pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev))!=NULL)
        {
                /* Look for 450NX PXB. Check for problem configurations
                   A PCI quirk checks bit 6 already */
                pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
                pci_read_config_word(pdev, 0x41, &cfg);
                /* Only on the original revision: IDE DMA can hang */
                if(rev == 0x00)
                        no_piix_dma = 1;
                /* On all revisions below 5 PXB bus lock must be disabled for IDE */
                else if(cfg & (1<<14) && rev < 5)
                        no_piix_dma = 2;
        }
        if(no_piix_dma)
                printk(KERN_WARNING "piix: 450NX errata present, disabling IDE DMA.\n");
        if(no_piix_dma == 2)
                printk(KERN_WARNING "piix: A BIOS update may resolve this.\n");
}               

static struct pci_device_id piix_pci_tbl[] = {
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371FB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371FB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371MX,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82372FB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10,PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_11,PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_11,PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_11,PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_11, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_10,PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17},
#ifdef CONFIG_BLK_DEV_IDE_SATA
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18},
#endif
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_19, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 20},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 21},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 22},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 23},
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 24},
        { 0, },
};
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);

static struct pci_driver driver = {
        .name           = "PIIX_IDE",
        .id_table       = piix_pci_tbl,
        .probe          = piix_init_one,
};

static int __init piix_ide_init(void)
{
        piix_check_450nx();
        return ide_pci_register_driver(&driver);
}

module_init(piix_ide_init);

MODULE_AUTHOR("Andre Hedrick, Andrzej Krzysztofowicz");
MODULE_DESCRIPTION("PCI driver module for Intel PIIX IDE");
MODULE_LICENSE("GPL");