release/src-rt-6.x/linux/linux-2.6/arch/ppc/boot/simple/m8xx_tty.c

   1 /* Minimal serial functions needed to send messages out the serial
   2  * port on the MBX console.
   3  *
   4  * The MBX uses SMC1 for the serial port.  We reset the port and use
   5  * only the first BD that EPPC-Bug set up as a character FIFO.
   6  *
   7  * Later versions (at least 1.4, maybe earlier) of the MBX EPPC-Bug
   8  * use COM1 instead of SMC1 as the console port.  This kinda sucks
   9  * for the rest of the kernel, so here we force the use of SMC1 again.
  10  */
  11 #include <linux/types.h>
  12 #include <asm/uaccess.h>
  13 #include <asm/mpc8xx.h>
  14 #include <asm/commproc.h>
  15
  16 #ifdef CONFIG_MBX
  17 #define MBX_CSR1        ((volatile u_char *)0xfa100000)
  18 #define CSR1_COMEN      (u_char)0x02
  19 #endif
  20
  21 #ifdef TQM_SMC2_CONSOLE
  22 #define PROFF_CONS      PROFF_SMC2
  23 #define CPM_CR_CH_CONS  CPM_CR_CH_SMC2
  24 #define SMC_INDEX       1
  25 static volatile iop8xx_t *iopp = (iop8xx_t *)&(((immap_t *)IMAP_ADDR)->im_ioport);
  26 #else
  27 #define PROFF_CONS      PROFF_SMC1
  28 #define CPM_CR_CH_CONS  CPM_CR_CH_SMC1
  29 #define SMC_INDEX       0
  30 #endif
  31
  32 static cpm8xx_t *cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
  33
  34 unsigned long
  35 serial_init(int ignored, bd_t *bd)
  36 {
  37         volatile smc_t          *sp;
  38         volatile smc_uart_t     *up;
  39         volatile cbd_t  *tbdf, *rbdf;
  40         volatile cpm8xx_t       *cp;
  41         uint    dpaddr, memaddr;
  42 #ifndef CONFIG_MBX
  43         uint    ui;
  44 #endif
  45
  46         cp = cpmp;
  47         sp = (smc_t*)&(cp->cp_smc[SMC_INDEX]);
  48         up = (smc_uart_t *)&cp->cp_dparam[PROFF_CONS];
  49
  50         /* Disable transmitter/receiver.
  51         */
  52         sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
  53
  54 #ifdef CONFIG_FADS
  55         /* Enable SMC1/2 transceivers.
  56         */
  57         *((volatile uint *)BCSR1) &= ~(BCSR1_RS232EN_1|BCSR1_RS232EN_2);
  58 #endif
  59
  60 #ifndef CONFIG_MBX
  61         {
  62         /* Initialize SMCx and use it for the console port.
  63          */
  64
  65         /* Enable SDMA.
  66         */
  67         ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sdcr = 1;
  68
  69 #ifdef TQM_SMC2_CONSOLE
  70         /* Use Port A for SMC2 instead of other functions.
  71         */
  72         iopp->iop_papar |=  0x00c0;
  73         iopp->iop_padir &= ~0x00c0;
  74         iopp->iop_paodr &= ~0x00c0;
  75 #else
  76         /* Use Port B for SMCs instead of other functions.
  77         */
  78         cp->cp_pbpar |= 0x00000cc0;
  79         cp->cp_pbdir &= ~0x00000cc0;
  80         cp->cp_pbodr &= ~0x00000cc0;
  81 #endif
  82
  83         /* Allocate space for two buffer descriptors in the DP ram.
  84          * For now, this address seems OK, but it may have to
  85          * change with newer versions of the firmware.
  86          */
  87         dpaddr = 0x0800;
  88
  89         /* Grab a few bytes from the top of memory for SMC FIFOs.
  90          */
  91         memaddr = (bd->bi_memsize - 32) & ~15;
  92
  93         /* Set the physical address of the host memory buffers in
  94          * the buffer descriptors.
  95          */
  96         rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
  97         rbdf->cbd_bufaddr = memaddr;
  98         rbdf->cbd_sc = 0;
  99         tbdf = rbdf + 1;
 100         tbdf->cbd_bufaddr = memaddr+4;
 101         tbdf->cbd_sc = 0;
 102
 103         /* Set up the uart parameters in the parameter ram.
 104         */
 105         up->smc_rbase = dpaddr;
 106         up->smc_tbase = dpaddr+sizeof(cbd_t);
 107         up->smc_rfcr = SMC_EB;
 108         up->smc_tfcr = SMC_EB;
 109
 110         /* Set UART mode, 8 bit, no parity, one stop.
 111          * Enable receive and transmit.
 112          */
 113         sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
 114
 115         /* Mask all interrupts and remove anything pending.
 116         */
 117         sp->smc_smcm = 0;
 118         sp->smc_smce = 0xff;
 119
 120         /* Set up the baud rate generator.
 121          * See 8xx_io/commproc.c for details.
 122          * This wires BRG1 to SMC1 and BRG2 to SMC2;
 123          */
 124         cp->cp_simode = 0x10000000;
 125         ui = bd->bi_intfreq / 16 / bd->bi_baudrate;
 126 #ifdef TQM_SMC2_CONSOLE
 127         cp->cp_brgc2 =
 128 #else
 129         cp->cp_brgc1 =
 130 #endif
 131                 ((ui - 1) < 4096)
 132                 ? (((ui - 1) << 1) | CPM_BRG_EN)
 133                 : ((((ui / 16) - 1) << 1) | CPM_BRG_EN | CPM_BRG_DIV16);
 134
 135 #else /* CONFIG_MBX */
 136         if (*MBX_CSR1 & CSR1_COMEN) {
 137                 /* COM1 is enabled.  Initialize SMC1 and use it for
 138                  * the console port.
 139                  */
 140
 141                 /* Enable SDMA.
 142                 */
 143                 ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sdcr = 1;
 144
 145                 /* Use Port B for SMCs instead of other functions.
 146                 */
 147                 cp->cp_pbpar |= 0x00000cc0;
 148                 cp->cp_pbdir &= ~0x00000cc0;
 149                 cp->cp_pbodr &= ~0x00000cc0;
 150
 151                 /* Allocate space for two buffer descriptors in the DP ram.
 152                  * For now, this address seems OK, but it may have to
 153                  * change with newer versions of the firmware.
 154                  */
 155                 dpaddr = 0x0800;
 156
 157                 /* Grab a few bytes from the top of memory.  EPPC-Bug isn't
 158                  * running any more, so we can do this.
 159                  */
 160                 memaddr = (bd->bi_memsize - 32) & ~15;
 161
 162                 /* Set the physical address of the host memory buffers in
 163                  * the buffer descriptors.
 164                  */
 165                 rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
 166                 rbdf->cbd_bufaddr = memaddr;
 167                 rbdf->cbd_sc = 0;
 168                 tbdf = rbdf + 1;
 169                 tbdf->cbd_bufaddr = memaddr+4;
 170                 tbdf->cbd_sc = 0;
 171
 172                 /* Set up the uart parameters in the parameter ram.
 173                 */
 174                 up->smc_rbase = dpaddr;
 175                 up->smc_tbase = dpaddr+sizeof(cbd_t);
 176                 up->smc_rfcr = SMC_EB;
 177                 up->smc_tfcr = SMC_EB;
 178
 179                 /* Set UART mode, 8 bit, no parity, one stop.
 180                  * Enable receive and transmit.
 181                  */
 182                 sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
 183
 184                 /* Mask all interrupts and remove anything pending.
 185                 */
 186                 sp->smc_smcm = 0;
 187                 sp->smc_smce = 0xff;
 188
 189                 /* Set up the baud rate generator.
 190                  * See 8xx_io/commproc.c for details.
 191                  */
 192                 cp->cp_simode = 0x10000000;
 193                 cp->cp_brgc1 =
 194                         (((bd->bi_intfreq/16) / 9600) << 1) | CPM_BRG_EN;
 195
 196                 /* Enable SMC1 for console output.
 197                 */
 198                 *MBX_CSR1 &= ~CSR1_COMEN;
 199         }
 200         else {
 201 #endif /* ndef CONFIG_MBX */
 202                 /* SMCx is used as console port.
 203                 */
 204                 tbdf = (cbd_t *)&cp->cp_dpmem[up->smc_tbase];
 205                 rbdf = (cbd_t *)&cp->cp_dpmem[up->smc_rbase];
 206
 207                 /* Issue a stop transmit, and wait for it.
 208                 */
 209                 cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_CONS,
 210                                         CPM_CR_STOP_TX) | CPM_CR_FLG;
 211                 while (cp->cp_cpcr & CPM_CR_FLG);
 212         }
 213
 214         /* Make the first buffer the only buffer.
 215         */
 216         tbdf->cbd_sc |= BD_SC_WRAP;
 217         rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
 218
 219         /* Single character receive.
 220         */
 221         up->smc_mrblr = 1;
 222         up->smc_maxidl = 0;
 223
 224         /* Initialize Tx/Rx parameters.
 225         */
 226         cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_CONS, CPM_CR_INIT_TRX) | CPM_CR_FLG;
 227         while (cp->cp_cpcr & CPM_CR_FLG);
 228
 229         /* Enable transmitter/receiver.
 230         */
 231         sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
 232
 233         /* This is ignored.
 234         */
 235         return 0;
 236 }
 237
 238 void
 239 serial_putc(void *ignored, const char c)
 240 {
 241         volatile cbd_t          *tbdf;
 242         volatile char           *buf;
 243         volatile smc_uart_t     *up;
 244
 245         up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS];
 246         tbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_tbase];
 247
 248         /* Wait for last character to go.
 249         */
 250         buf = (char *)tbdf->cbd_bufaddr;
 251         while (tbdf->cbd_sc & BD_SC_READY);
 252
 253         *buf = c;
 254         tbdf->cbd_datlen = 1;
 255         tbdf->cbd_sc |= BD_SC_READY;
 256 }
 257
 258 char
 259 serial_getc(void *ignored)
 260 {
 261         volatile cbd_t          *rbdf;
 262         volatile char           *buf;
 263         volatile smc_uart_t     *up;
 264         char                    c;
 265
 266         up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS];
 267         rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
 268
 269         /* Wait for character to show up.
 270         */
 271         buf = (char *)rbdf->cbd_bufaddr;
 272         while (rbdf->cbd_sc & BD_SC_EMPTY);
 273         c = *buf;
 274         rbdf->cbd_sc |= BD_SC_EMPTY;
 275
 276         return(c);
 277 }
 278
 279 int
 280 serial_tstc(void *ignored)
 281 {
 282         volatile cbd_t          *rbdf;
 283         volatile smc_uart_t     *up;
 284
 285         up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS];
 286         rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
 287
 288         return(!(rbdf->cbd_sc & BD_SC_EMPTY));
 289 }