release/src-rt-6.x/linux/linux-2.6/arch/frv/kernel/gdb-io.h

   1 /* gdb-io.h: FR403 GDB I/O port defs
   2  *
   3  * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
   4  * Written by David Howells (dhowells@redhat.com)
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * as published by the Free Software Foundation; either version
   9  * 2 of the License, or (at your option) any later version.
  10  */
  11
  12 #ifndef _GDB_IO_H
  13 #define _GDB_IO_H
  14
  15 #include <asm/serial-regs.h>
  16
  17 #undef UART_RX
  18 #undef UART_TX
  19 #undef UART_DLL
  20 #undef UART_DLM
  21 #undef UART_IER
  22 #undef UART_IIR
  23 #undef UART_FCR
  24 #undef UART_LCR
  25 #undef UART_MCR
  26 #undef UART_LSR
  27 #undef UART_MSR
  28 #undef UART_SCR
  29
  30 #define UART_RX         0*8     /* In:  Receive buffer (DLAB=0) */
  31 #define UART_TX         0*8     /* Out: Transmit buffer (DLAB=0) */
  32 #define UART_DLL        0*8     /* Out: Divisor Latch Low (DLAB=1) */
  33 #define UART_DLM        1*8     /* Out: Divisor Latch High (DLAB=1) */
  34 #define UART_IER        1*8     /* Out: Interrupt Enable Register */
  35 #define UART_IIR        2*8     /* In:  Interrupt ID Register */
  36 #define UART_FCR        2*8     /* Out: FIFO Control Register */
  37 #define UART_LCR        3*8     /* Out: Line Control Register */
  38 #define UART_MCR        4*8     /* Out: Modem Control Register */
  39 #define UART_LSR        5*8     /* In:  Line Status Register */
  40 #define UART_MSR        6*8     /* In:  Modem Status Register */
  41 #define UART_SCR        7*8     /* I/O: Scratch Register */
  42
  43 #define UART_LCR_DLAB   0x80    /* Divisor latch access bit */
  44 #define UART_LCR_SBC    0x40    /* Set break control */
  45 #define UART_LCR_SPAR   0x20    /* Stick parity (?) */
  46 #define UART_LCR_EPAR   0x10    /* Even parity select */
  47 #define UART_LCR_PARITY 0x08    /* Parity Enable */
  48 #define UART_LCR_STOP   0x04    /* Stop bits: 0=1 stop bit, 1= 2 stop bits */
  49 #define UART_LCR_WLEN5  0x00    /* Wordlength: 5 bits */
  50 #define UART_LCR_WLEN6  0x01    /* Wordlength: 6 bits */
  51 #define UART_LCR_WLEN7  0x02    /* Wordlength: 7 bits */
  52 #define UART_LCR_WLEN8  0x03    /* Wordlength: 8 bits */
  53
  54
  55 #endif /* _GDB_IO_H */