release/src/Makefile

   1
   2 #
   3 # Toplevel Makefile for the BCM947xx Linux Router release
   4 #
   5 # Copyright 2005, Broadcom Corporation
   6 # All Rights Reserved.
   7 #
   8 # THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   9 # KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
  10 # SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  11 # FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  12 #
  13 # $Id: Makefile,v 1.53 2005/04/25 03:54:37 tallest Exp $
  14 #
  15
  16 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  17
  18 # To rebuild everything and all configurations:
  19 #  make distclean
  20 #  make V1=whatever V2=sub-whatever VPN=vpn3.6 a b c d m n o
  21 # The 1st "whatever" would be the build number, the sub-whatever would
  22 #       be the update to the version.
  23 #
  24 # Example:
  25 # make V1=8516 V2="-jffs.1" a b c d m s n o
  26
  27 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  28
  29
  30 export ac_cv_func_malloc_0_nonnull=yes
  31 export SRCBASE := $(shell pwd)
  32 RELEASEDIR := $(shell (cd $(SRCBASE)/.. && pwd -P))
  33 PATH := $(RELEASEDIR)/tools:$(PATH)
  34 export TPROFILE := N
  35
  36 include ./target.mak
  37
  38 # Normally you'd do something like "make V1=8516 V2=-sub-ver a b c d"
  39 # But if you don't give anything for "V1", it'll get a default from tomato_version.
  40 V1 ?= "--def"
  41 VPN ?= "VPN"
  42 ifeq ($(CONFIG_LINUX26),y)
  43 ND = "K26"
  44 else
  45 ND = "ND"
  46 endif
  47
  48 PPTPD ?= "n"
  49
  50 ifeq ($(NVRAM_SIZE),)
  51 NVRAM_SIZE = 0
  52 endif
  53
  54 -include tomato_profile.mak
  55
  56 # This could be simpler by just using $(TOMATO_PROFILE_NAME) like it used to be,
  57 # but that's fragile.  If you make one certain innocuous change elsewhere in the
  58 # makefile(s), the build will silently be wrong.  This way it works properly every time.
  59 current_BUILD_NAME = $(strip $(shell grep "^TOMATO_BUILD_NAME" tomato_profile.mak  | cut -d"=" -f2))
  60 current_BUILD_DESC = $(strip $(shell grep "^TOMATO_BUILD_DESC" tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  61 current_BUILD_USB  = $(strip $(shell grep "^TOMATO_BUILD_USB"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  62 current_TOMATO_VER = $(strip $(shell grep "TOMATO_MAJOR" router/shared/tomato_version.h  | cut -d"\"" -f2)).$(strip $(shell grep "TOMATO_MINOR" router/shared/tomato_version.h  | cut -d"\"" -f2))
  63
  64 uppercase_N = $(shell echo $(N) | tr a-z  A-Z)
  65 lowercase_N = $(shell echo $(N) | tr A-Z a-z)
  66 uppercase_B = $(shell echo $(B) | tr a-z  A-Z)
  67 lowercase_B = $(shell echo $(B) | tr A-Z a-z)
  68
  69 ifeq ($(CONFIG_LINUX26),y)
  70 mips_rev = $(if $(filter $(MIPS32),r2),MIPSR2,MIPSR1)
  71 KERN_SIZE_OPT ?= n
  72 else
  73 mips_rev =
  74 KERN_SIZE_OPT ?= y
  75 endif
  76
  77 beta = $(if $(filter $(TOMATO_EXPERIMENTAL),1),-beta,)
  78
  79 tomato_ver:
  80         @echo ""
  81         @btools/uversion.pl --gen $(V1) $(mips_rev)$(beta)$(V2) $(ND) $(current_BUILD_USB) $(current_BUILD_DESC)
  82
  83 ifeq ($(TOMATO_BUILD),)
  84
  85 all:
  86         $(MAKE) a
  87
  88 else
  89
  90 all: tomato_ver
  91         @echo ""
  92         @echo "Building Tomato $(ND) $(current_BUILD_USB) $(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2) $(current_BUILD_DESC) $(current_BUILD_NAME) with $(TOMATO_PROFILE_NAME) Profile"
  93
  94         @echo ""
  95         @echo ""
  96
  97         @-mkdir image
  98         @$(MAKE) -C router all
  99         @$(MAKE) -C router install
 100         @$(MAKE) -C btools
 101
 102         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx
 103         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 104 ifeq ($(LINKSYS_E),1)
 105         @rm -f image/tomato-E??00$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 106 endif
 107 ifeq ($(BELKIN),y)
 108 ifneq ($(NVRAM_SIZE),60)
 109         @rm -f image/tomato-F7D????$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 110         @rm -f image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 111 endif
 112 endif
 113         @echo "" >>fpkg.log
 114         @echo "***********************" `date` "************************" >>fpkg.log
 115         @cat router/shared/tomato_version >>fpkg.log
 116         @echo "" >>fpkg.log
 117         @cat router/target.info >>fpkg.log
 118 ifeq ($(wildcard include/bcm20xx.h),)
 119         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 120                 -t image/tomato.trx \
 121                 -l W54G,image/WRT54G_WRT54GL.bin \
 122                 -l W54S,image/WRT54GS.bin \
 123                 -l W54s,image/WRT54GSv4.bin \
 124                 -l W54U,image/WRTSL54GS.bin \
 125                 -m 0x10577050,image/WR850G.bin \
 126                 | tee -a fpkg.log
 127 else
 128 ifeq ($(LINKSYS_E),1)
 129         # Linksys E-series build plus generic TRX image
 130         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 131                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 132                 -l 4200,image/tomato-E4200$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 133                 -l 61XN,image/tomato-E3000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 134                 -l 32XN,image/tomato-E2000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 135                 | tee -a fpkg.log
 136 else
 137 ifeq ($(BELKIN),y)
 138 ifneq ($(NVRAM_SIZE),60)
 139         # Create Belkin images
 140         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 141                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 142                 -b 0x20100322,image/tomato-F7D3301$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 143                 -b 0x20090928,image/tomato-F7D3302$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 144                 -b 0x20091006,image/tomato-F7D4302$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 145                 -b 0x00017116,image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 146                 | tee -a fpkg.log
 147 endif
 148 else
 149         # Create generic TRX image
 150         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 151                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 152                 | tee -a fpkg.log
 153 endif
 154 endif
 155 endif
 156
 157         @cp fpkg.log image/fpkg-$(V1)$(mips_rev)$(beta)$(V2).log
 158         @echo ""
 159         @echo "-----------------"
 160         @echo `cat router/shared/tomato_version` " ready"
 161         @echo "-----------------"
 162 ifneq ($(NOVERSION),1)
 163         @cp router/shared/tomato_version router/shared/tomato_version_last
 164         @btools/uversion.pl --bump
 165 endif
 166 endif
 167
 168
 169
 170 clean:
 171         @touch router/.config
 172         @rm -f router/config_[a-z]
 173         @rm -f router/busybox/config_[a-z]
 174         @$(MAKE) -C router $@
 175         @-rmdir router/mipsel-uclibc
 176
 177 cleanimage:
 178         @rm -f fpkg.log
 179         @rm -fr image/*
 180         @rm -f router/.config
 181         @touch router/.config
 182         @-mkdir image
 183
 184 cleantools:
 185         @$(MAKE) -C $(LINUXDIR)/scripts/squashfs clean
 186         @$(MAKE) -C btools clean
 187
 188 cleankernel:
 189         @cd $(LINUXDIR) && \
 190         mv .config save-config && \
 191         $(MAKE) distclean || true; \
 192         cp -p save-config .config || true
 193
 194 kernel:
 195         @$(MAKE) -C router kernel
 196         @ls -l $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/zImage
 197
 198 distclean: clean cleanimage cleankernel cleantools
 199 ifneq ($(INSIDE_MAK),1)
 200         @$(MAKE) -C router $@ INSIDE_MAK=1
 201 endif
 202         mv router/busybox/.config busybox-saved-config || true
 203         @$(MAKE) -C router/busybox distclean
 204         @rm -f router/busybox/config_current
 205         @cp -p busybox-saved-config router/busybox/.config || true
 206         @cp -p router/busybox/.config  router/busybox/config_current || true
 207         @rm -f router/config_current
 208         @rm -f router/.config.cmd router/.config.old router/.config
 209         @rm -f router/libfoo_xref.txt
 210         @rm -f tomato_profile.mak router/shared/tomato_profile.h
 211         @touch tomato_profile.mak
 212         @touch router/shared/tomato_profile.h
 213
 214
 215 prepk:
 216         @cd $(LINUXDIR) ; \
 217                 rm -f config_current ; \
 218                 ln -s config_base config_current ; \
 219                 cp -f config_current .config
 220         $(MAKE) -C $(LINUXDIR) oldconfig
 221 ifneq ($(CONFIG_LINUX26),y)
 222         $(MAKE) -C $(LINUXDIR) dep
 223 endif
 224
 225 what:
 226         @echo ""
 227         @echo "$(current_BUILD_DESC)-$(current_BUILD_NAME)-$(TOMATO_PROFILE_NAME) Profile"
 228         @echo ""
 229
 230
 231 # The methodology for making the different builds is to
 232 # copy the "base" config file to the "target" config file in
 233 # the appropriate directory, and then edit it by removing and
 234 # inserting the desired configuration lines.
 235 # You can't just delete the "whatever=y" line, you must have
 236 # a "...is not set" line, or the make oldconfig will stop and ask
 237 # what to do.
 238
 239 # Options for "make bin" :
 240 # BUILD_DESC (Std|Lite|Ext|...)
 241 # MIPS32 (r2|r1)
 242 # KERN_SIZE_OPT
 243 # USB ("USB"|"")
 244 # JFFSv1 | NO_JFFS
 245 # NO_CIFS, NO_SSH, NO_ZEBRA, NO_SAMBA, NO_HTTPS, NO_XXTP, NO_LIBOPT
 246 # SAMBA3, OPENVPN, IPV6SUPP, EBTABLES, NTFS, MEDIASRV, BBEXTRAS, USBEXTRAS, BCM57, SLIM, NOCAT, CTF, NGINX NANO
 247 # NFS BTCLIENT BTGUI TR_EXTRAS SNMP SDHC HFS UPS DNSCRYPT PPTPD TOR IPSEC RAID
 248
 249 define RouterOptions
 250         @( \
 251         if [ "$(CONFIG_LINUX26)" = "y" ] || [ "$(SAMBA3)" = "y" ]; then \
 252                 sed -i "/TCONFIG_SAMBA3/d" $(1); \
 253                 echo "TCONFIG_SAMBA3=y" >>$(1); \
 254         fi; \
 255         sed -i "/TCONFIG_EMF/d" $(1); \
 256         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 257                 if [ "$(SLIM)" = "y" ]; then \
 258                         echo "# TCONFIG_EMF is not set" >>$(1); \
 259                 else \
 260                         echo "TCONFIG_EMF=y" >>$(1); \
 261                 fi; \
 262         else \
 263                 echo "# TCONFIG_EMF is not set" >>$(1); \
 264         fi; \
 265         sed -i "/TCONFIG_JFFSV1/d" $(1); \
 266         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 267                 if [ "$(JFFSv1)" = "y" ]; then \
 268                         echo "TCONFIG_JFFSV1=y" >>$(1); \
 269                 else \
 270                         echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 271                 fi; \
 272         else \
 273                 echo "TCONFIG_JFFSV1=y" >>$(1); \
 274         fi; \
 275         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(IPSEC)" = "y" ]; then \
 276                 echo "TCONFIG_IPSEC=y" >>$(1); \
 277         else \
 278                 echo "# TCONFIG_IPSEC is not set" >>$(1); \
 279         fi; \
 280         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(RAID)" = "y" ]; then \
 281                 echo "TCONFIG_RAID=y" >>$(1); \
 282         else \
 283                 echo "# TCONFIG_RAID is not set" >>$(1); \
 284         fi; \
 285         if [ "$(USB)" = "USB" ]; then \
 286                 sed -i "/TCONFIG_USB is not set/d" $(1); \
 287                 echo "TCONFIG_USB=y" >>$(1); \
 288                 if [ "$(USBEXTRAS)" = "y" ]; then \
 289                         sed -i "/TCONFIG_USB_EXTRAS/d" $(1); \
 290                         echo "TCONFIG_USB_EXTRAS=y" >>$(1); \
 291                 fi; \
 292                 if [ "$(NTFS)" = "y" ]; then \
 293                         sed -i "/TCONFIG_NTFS/d" $(1); \
 294                         echo "TCONFIG_NTFS=y" >>$(1); \
 295                 fi; \
 296                 if [ "$(MEDIASRV)" = "y" ]; then \
 297                         sed -i "/TCONFIG_MEDIA_SERVER/d" $(1); \
 298                         echo "TCONFIG_MEDIA_SERVER=y" >>$(1); \
 299                 fi; \
 300         else \
 301                 sed -i "/TCONFIG_USB=y/d" $(1); \
 302                 echo "# TCONFIG_USB is not set" >>$(1); \
 303         fi; \
 304         if [ "$(NO_SAMBA)" = "y" ]; then \
 305                 sed -i "/TCONFIG_SAMBASRV/d" $(1); \
 306                 echo "# TCONFIG_SAMBASRV is not set" >>$(1); \
 307         fi; \
 308         if [ "$(NO_ZEBRA)" = "y" ]; then \
 309                 sed -i "/TCONFIG_ZEBRA/d" $(1); \
 310                 echo "# TCONFIG_ZEBRA is not set" >>$(1); \
 311         fi; \
 312         if [ "$(NO_JFFS)" = "y" ]; then \
 313                 sed -i "/TCONFIG_JFFS2/d" $(1); \
 314                 echo "# TCONFIG_JFFS2 is not set" >>$(1); \
 315                 sed -i "/TCONFIG_JFFSV1/d" $(1); \
 316                 echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 317         fi; \
 318         if [ "$(NO_CIFS)" = "y" ]; then \
 319                 sed -i "/TCONFIG_CIFS/d" $(1); \
 320                 echo "# TCONFIG_CIFS is not set" >>$(1); \
 321         fi; \
 322         if [ "$(NO_SSH)" = "y" ]; then \
 323                 sed -i "/TCONFIG_SSH/d" $(1); \
 324                 echo "# TCONFIG_SSH is not set" >>$(1); \
 325         fi; \
 326         if [ "$(NO_HTTPS)" = "y" ]; then \
 327                 sed -i "/TCONFIG_HTTPS/d" $(1); \
 328                 echo "# TCONFIG_HTTPS is not set" >>$(1); \
 329         fi; \
 330         if [ "$(NO_XXTP)" = "y" ]; then \
 331                 sed -i "/TCONFIG_L2TP/d" $(1); \
 332                 echo "# TCONFIG_L2TP is not set" >>$(1); \
 333                 sed -i "/TCONFIG_PPTP/d" $(1); \
 334                 echo "# TCONFIG_PPTP is not set" >>$(1); \
 335         fi; \
 336         if [ "$(NO_LIBOPT)" = "y" ]; then \
 337                 sed -i "/TCONFIG_OPTIMIZE_SHARED_LIBS/d" $(1); \
 338                 echo "# TCONFIG_OPTIMIZE_SHARED_LIBS is not set" >>$(1); \
 339         fi; \
 340         if [ "$(EBTABLES)" = "y" ]; then \
 341                 sed -i "/TCONFIG_EBTABLES/d" $(1); \
 342                 echo "TCONFIG_EBTABLES=y" >>$(1); \
 343         fi; \
 344         if [ "$(IPV6SUPP)" = "y" ]; then \
 345                 sed -i "/TCONFIG_IPV6/d" $(1); \
 346                 echo "TCONFIG_IPV6=y" >>$(1); \
 347         fi; \
 348         if [ "$(NOCAT)" = "y" ]; then \
 349                 sed -i "/TCONFIG_NOCAT/d" $(1); \
 350                 echo "TCONFIG_NOCAT=y" >>$(1); \
 351         fi; \
 352         if [ "$(NGINX)" = "y" ]; then \
 353                 sed -i "/TCONFIG_NGINX/d" $(1); \
 354                 echo "TCONFIG_NGINX=y" >>$(1); \
 355         fi; \
 356         if [ "$(OPENVPN)" = "y" ]; then \
 357                 sed -i "/TCONFIG_LZO/d" $(1); \
 358                 echo "TCONFIG_LZO=y" >>$(1); \
 359                 sed -i "/TCONFIG_OPENVPN/d" $(1); \
 360                 echo "TCONFIG_OPENVPN=y" >>$(1); \
 361                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 362                         sed -i "/TCONFIG_FTP_SSL/d" $(1); \
 363                         echo "TCONFIG_FTP_SSL=y" >>$(1); \
 364                 fi; \
 365         fi; \
 366         if [ "$(PPTPD)" = "y" ]; then \
 367                 sed -i "/TCONFIG_PPTPD/d" $(1); \
 368                 echo "TCONFIG_PPTPD=y" >>$(1); \
 369         fi; \
 370         if [ "$(BTCLIENT)" = "y" ]; then \
 371                 sed -i "/TCONFIG_BT/d" $(1); \
 372                 echo "TCONFIG_BT=y" >>$(1); \
 373                 sed -i "/TCONFIG_BBT/d" $(1); \
 374                 echo "TCONFIG_BBT=y" >>$(1); \
 375         fi; \
 376         if [ "$(BTGUI)" = "y" ]; then \
 377                 sed -i "/TCONFIG_BT/d" $(1); \
 378                 echo "TCONFIG_BT=y" >>$(1); \
 379         fi; \
 380         if [ "$(TR_EXTRAS)" = "y" ]; then \
 381                 sed -i "/TCONFIG_TR_EXTRAS/d" $(1); \
 382                 echo "TCONFIG_TR_EXTRAS=y" >>$(1); \
 383         fi; \
 384         if [ "$(NFS)" = "y" ]; then \
 385                 sed -i "/TCONFIG_NFS/d" $(1); \
 386                 echo "TCONFIG_NFS=y" >>$(1); \
 387         fi; \
 388         if [ "$(SNMP)" = "y" ]; then \
 389                 sed -i "/TCONFIG_SNMP/d" $(1); \
 390                 echo "TCONFIG_SNMP=y" >>$(1); \
 391         fi; \
 392         if [ "$(SDHC)" = "y" ]; then \
 393                 sed -i "/TCONFIG_SDHC/d" $(1); \
 394                 echo "TCONFIG_SDHC=y" >>$(1); \
 395         fi; \
 396         if [ "$(DNSSEC)" = "y" ]; then \
 397                 sed -i "/TCONFIG_DNSSEC/d" $(1); \
 398                 echo "TCONFIG_DNSSEC=y" >>$(1); \
 399         fi; \
 400         if [ "$(HFS)" = "y" ]; then \
 401                 sed -i "/TCONFIG_HFS/d" $(1); \
 402                 echo "TCONFIG_HFS=y" >>$(1); \
 403         fi; \
 404         if [ "$(UPS)" = "y" ]; then \
 405                 sed -i "/TCONFIG_UPS/d" $(1); \
 406                 echo "TCONFIG_UPS=y" >>$(1); \
 407         fi; \
 408         if [ "$(NANO)" = "y" ]; then \
 409                 sed -i "/TCONFIG_NANO/d" $(1); \
 410                 echo "TCONFIG_NANO=y" >>$(1); \
 411         fi; \
 412         if [ "$(DNSCRYPT)" = "y" ]; then \
 413                 sed -i "/TCONFIG_DNSCRYPT/d" $(1); \
 414                 echo "TCONFIG_DNSCRYPT=y" >>$(1); \
 415         fi; \
 416         if [ "$(TOR)" = "y" ]; then \
 417                 sed -i "/TCONFIG_TOR/d" $(1); \
 418                 echo "TCONFIG_TOR=y" >>$(1); \
 419         fi; \
 420         if [ "$(CTF)" = "y" ]; then \
 421                 sed -i "/TCONFIG_CTF/d" $(1); \
 422                 echo "TCONFIG_CTF=y" >>$(1); \
 423         fi; \
 424         if [ "$(TINC)" = "y" ]; then \
 425                 sed -i "/TCONFIG_TINC/d" $(1); \
 426                 echo "TCONFIG_TINC=y" >>$(1); \
 427         fi; \
 428         )
 429 endef
 430
 431 define BusyboxOptions
 432         @( \
 433         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 434                 sed -i "/CONFIG_FEATURE_2_4_MODULES/d" $(1); \
 435                 echo "# CONFIG_FEATURE_2_4_MODULES is not set" >>$(1); \
 436                 sed -i "/CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT/d" $(1); \
 437                 echo "CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y" >>$(1); \
 438                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 439                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 440                 sed -i "/CONFIG_MKNOD/d" $(1); \
 441                 echo "CONFIG_MKNOD=y" >>$(1); \
 442                 sed -i "/CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE/d" $(1); \
 443                 echo "CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=512" >>$(1); \
 444         else \
 445                 sed -i "/CONFIG_UDHCPC=y/d" $(1); \
 446                 sed -i "/CONFIG_UDHCPC_OLD/d" $(1); \
 447                 echo "CONFIG_UDHCPC_OLD=y" >>$(1); \
 448                 echo "# CONFIG_UDHCPC is not set" >>$(1); \
 449         fi; \
 450         if [ "$(NO_CIFS)" = "y" ]; then \
 451                 sed -i "/CONFIG_FEATURE_MOUNT_CIFS/d" $(1); \
 452                 echo "# CONFIG_FEATURE_MOUNT_CIFS is not set" >>$(1); \
 453         fi; \
 454         if [ "$(BBEXTRAS)" = "y" ]; then \
 455                 sed -i "/CONFIG_SENDMAIL/d" $(1); \
 456                 echo "CONFIG_SENDMAIL=y" >>$(1); \
 457                 sed -i "/CONFIG_WHOIS/d" $(1); \
 458                 echo "CONFIG_WHOIS=y" >>$(1); \
 459                 sed -i "/CONFIG_FEATURE_SORT_BIG/d" $(1); \
 460                 echo "CONFIG_FEATURE_SORT_BIG=y" >>$(1); \
 461                 sed -i "/CONFIG_CLEAR/d" $(1); \
 462                 echo "CONFIG_CLEAR=y" >>$(1); \
 463                 sed -i "/CONFIG_NICE/d" $(1); \
 464                 echo "CONFIG_NICE=y" >>$(1); \
 465                 sed -i "/CONFIG_SETCONSOLE/d" $(1); \
 466                 echo "CONFIG_SETCONSOLE=y" >>$(1); \
 467                 sed -i "/CONFIG_SEQ/d" $(1); \
 468                 echo "CONFIG_SEQ=y" >>$(1); \
 469                 sed -i "/CONFIG_STTY/d" $(1); \
 470                 echo "CONFIG_STTY=y" >>$(1); \
 471         fi; \
 472         if [ "$(USB)" = "USB" ]; then \
 473                 if [ "$(USBEXTRAS)" = "y" ]; then \
 474                         sed -i "/CONFIG_E2FSCK/d" $(1); \
 475                         echo "CONFIG_E2FSCK=y" >>$(1); \
 476                         sed -i "/CONFIG_MKE2FS/d" $(1); \
 477                         echo "CONFIG_MKE2FS=y" >>$(1); \
 478                         sed -i "/CONFIG_FDISK/d" $(1); \
 479                         echo "CONFIG_FDISK=y" >>$(1); \
 480                         sed -i "/CONFIG_FEATURE_FDISK_WRITABLE/d" $(1); \
 481                         echo "CONFIG_FEATURE_FDISK_WRITABLE=y" >>$(1); \
 482                         sed -i "/CONFIG_MKFS_VFAT/d" $(1); \
 483                         echo "CONFIG_MKFS_VFAT=y" >>$(1); \
 484                         sed -i "/CONFIG_MKSWAP/d" $(1); \
 485                         echo "CONFIG_MKSWAP=y" >>$(1); \
 486                         sed -i "/CONFIG_FLOCK/d" $(1); \
 487                         echo "CONFIG_FLOCK=y" >>$(1); \
 488                         sed -i "/CONFIG_FSYNC/d" $(1); \
 489                         echo "CONFIG_FSYNC=y" >>$(1); \
 490                         sed -i "/CONFIG_TUNE2FS/d" $(1); \
 491                         echo "CONFIG_TUNE2FS=y" >>$(1); \
 492                         sed -i "/CONFIG_E2LABEL/d" $(1); \
 493                         echo "CONFIG_E2LABEL=y" >>$(1); \
 494                         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 495                                 sed -i "/CONFIG_LSUSB/d" $(1); \
 496                                 echo "CONFIG_LSUSB=y" >>$(1); \
 497                                 sed -i "/CONFIG_FEATURE_WGET_STATUSBAR/d" $(1); \
 498                                 echo "CONFIG_FEATURE_WGET_STATUSBAR=y" >>$(1); \
 499                                 sed -i "/CONFIG_FEATURE_VERBOSE_USAGE/d" $(1); \
 500                                 echo "CONFIG_FEATURE_VERBOSE_USAGE=y" >>$(1); \
 501                         fi; \
 502                 fi; \
 503         else \
 504                 sed -i "/CONFIG_FEATURE_MOUNT_LOOP/d" $(1); \
 505                 echo "# CONFIG_FEATURE_MOUNT_LOOP is not set" >>$(1); \
 506                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 507                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 508                 sed -i "/CONFIG_FEATURE_MOUNT_LABEL/d" $(1); \
 509                 echo "# CONFIG_FEATURE_MOUNT_LABEL is not set" >>$(1); \
 510                 sed -i "/CONFIG_FEATURE_MOUNT_FSTAB/d" $(1); \
 511                 echo "# CONFIG_FEATURE_MOUNT_FSTAB is not set" >>$(1); \
 512                 sed -i "/CONFIG_VOLUMEID/d" $(1); \
 513                 echo "# CONFIG_VOLUMEID is not set" >>$(1); \
 514                 sed -i "/CONFIG_BLKID/d" $(1); \
 515                 echo "# CONFIG_BLKID is not set" >>$(1); \
 516                 sed -i "/CONFIG_SWAPONOFF/d" $(1); \
 517                 echo "# CONFIG_SWAPONOFF is not set" >>$(1); \
 518                 sed -i "/CONFIG_CHROOT/d" $(1); \
 519                 echo "# CONFIG_CHROOT is not set" >>$(1); \
 520                 sed -i "/CONFIG_PIVOT_ROOT/d" $(1); \
 521                 echo "# CONFIG_PIVOT_ROOT is not set" >>$(1); \
 522                 sed -i "/CONFIG_TRUE/d" $(1); \
 523                 echo "# CONFIG_TRUE is not set" >>$(1); \
 524         fi; \
 525         if [ "$(IPV6SUPP)" = "y" ]; then \
 526                 sed -i "/CONFIG_FEATURE_IPV6/d" $(1); \
 527                 echo "CONFIG_FEATURE_IPV6=y" >>$(1); \
 528                 sed -i "/CONFIG_PING6/d" $(1); \
 529                 echo "CONFIG_PING6=y" >>$(1); \
 530                 sed -i "/CONFIG_TRACEROUTE6/d" $(1); \
 531                 echo "CONFIG_TRACEROUTE6=y" >>$(1); \
 532                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 533                         sed -i "/CONFIG_FEATURE_UDHCP_RFC5969/d" $(1); \
 534                         echo "CONFIG_FEATURE_UDHCP_RFC5969=y" >>$(1); \
 535                 fi; \
 536         fi; \
 537         if [ "$(SLIM)" = "y" ]; then \
 538                 sed -i "/CONFIG_AWK/d" $(1); \
 539                 echo "# CONFIG_AWK is not set" >>$(1); \
 540                 sed -i "/CONFIG_BASENAME/d" $(1); \
 541                 echo "# CONFIG_BASENAME is not set" >>$(1); \
 542                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 543                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 544                 sed -i "/CONFIG_BLKID/d" $(1); \
 545                 echo "# CONFIG_BLKID is not set" >>$(1); \
 546                 sed -i "/CONFIG_TELNET=y/d" $(1); \
 547                 echo "# CONFIG_TELNET is not set" >>$(1); \
 548                 sed -i "/CONFIG_ARPING/d" $(1); \
 549                 echo "# CONFIG_ARPING is not set" >>$(1); \
 550                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 551                 echo "# CONFIG_FEATURE_LS_COLOR is not set" >>$(1); \
 552                 sed -i "/CONFIG_CHOWN/d" $(1); \
 553                 echo "# CONFIG_CHOWN is not set" >>$(1); \
 554         else \
 555                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 556                 echo "CONFIG_FEATURE_LS_COLOR=y" >>$(1); \
 557                 sed -i "/CONFIG_FEATURE_LS_COLOR_IS_DEFAULT/d" $(1); \
 558                 echo "CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y" >>$(1); \
 559         fi; \
 560         )
 561 endef
 562
 563 define KernelConfig
 564         @( \
 565         sed -i "/CONFIG_NVRAM_SIZE/d" $(1); \
 566         echo "CONFIG_NVRAM_SIZE="$(NVRAM_SIZE) >>$(1); \
 567         sed -i "/CONFIG_CC_OPTIMIZE_FOR_SIZE/d" $(1); \
 568         if [ "$(KERN_SIZE_OPT)" = "y" ]; then \
 569                 echo "CONFIG_CC_OPTIMIZE_FOR_SIZE=y" >>$(1); \
 570         else \
 571                 echo "# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set" >>$(1); \
 572         fi; \
 573         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(MIPS32)" = "r2" ]; then \
 574                 sed -i "/CONFIG_CPU_MIPS32_R1/d" $(1); \
 575                 echo "# CONFIG_CPU_MIPS32_R1 is not set" >>$(1); \
 576                 sed -i "/CONFIG_CPU_MIPS32_R2/d" $(1); \
 577                 echo "CONFIG_CPU_MIPS32_R2=y" >>$(1); \
 578                 sed -i "/CONFIG_CPU_MIPSR1/d" $(1); \
 579                 echo "CONFIG_CPU_MIPSR2=y" >>$(1); \
 580         fi; \
 581         if [ "$(UPS)" = "y" ]; then \
 582                 sed -i "/CONFIG_INPUT=m/d" $(1); \
 583                 echo "CONFIG_INPUT=y" >>$(1); \
 584                 sed -i "/CONFIG_USB=m/d" $(1); \
 585                 echo "CONFIG_USB=y" >>$(1); \
 586                 sed -i "/CONFIG_HID=m/d" $(1); \
 587                 echo "CONFIG_HID=y" >>$(1); \
 588                 sed -i "/CONFIG_USB_HID=m/d" $(1); \
 589                 echo "CONFIG_USB_HID=y" >>$(1); \
 590                 sed -i "/CONFIG_USB_HIDDEV=m/d" $(1); \
 591                 echo "CONFIG_USB_HIDDEV=y" >>$(1); \
 592                 sed -i "/CONFIG_USB_DEVICEFS=m/d" $(1); \
 593                 echo "CONFIG_USB_DEVICEFS=y" >>$(1); \
 594         fi; \
 595         if [ "$(USB)" = "" ]; then \
 596                 sed -i "/CONFIG_EFI_PARTITION/d" $(1); \
 597                 echo "# CONFIG_EFI_PARTITION is not set" >>$(1); \
 598         fi; \
 599         if [ "$(IPV6SUPP)" = "y" ]; then \
 600                 sed -i "/CONFIG_IPV6 is not set/d" $(1); \
 601                 echo "CONFIG_IPV6=y" >>$(1); \
 602                 sed -i "/CONFIG_IP6_NF_IPTABLES/d" $(1); \
 603                 echo "CONFIG_IP6_NF_IPTABLES=y" >>$(1); \
 604                 sed -i "/CONFIG_IP6_NF_MATCH_RT/d" $(1); \
 605                 echo "CONFIG_IP6_NF_MATCH_RT=y" >>$(1); \
 606                 sed -i "/CONFIG_IP6_NF_FILTER/d" $(1); \
 607                 echo "CONFIG_IP6_NF_FILTER=m" >>$(1); \
 608                 sed -i "/CONFIG_IP6_NF_TARGET_LOG/d" $(1); \
 609                 echo "CONFIG_IP6_NF_TARGET_LOG=m" >>$(1); \
 610                 sed -i "/CONFIG_IP6_NF_TARGET_REJECT/d" $(1); \
 611                 echo "CONFIG_IP6_NF_TARGET_REJECT=m" >>$(1); \
 612                 sed -i "/CONFIG_IP6_NF_MANGLE/d" $(1); \
 613                 echo "CONFIG_IP6_NF_MANGLE=m" >>$(1); \
 614                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 615                         sed -i "/CONFIG_NF_CONNTRACK_IPV6/d" $(1); \
 616                         echo "CONFIG_NF_CONNTRACK_IPV6=m" >>$(1); \
 617                         sed -i "/CONFIG_NETFILTER_XT_MATCH_HL/d" $(1); \
 618                         echo "CONFIG_NETFILTER_XT_MATCH_HL=m" >>$(1); \
 619                         sed -i "/CONFIG_IPV6_ROUTER_PREF/d" $(1); \
 620                         echo "CONFIG_IPV6_ROUTER_PREF=y" >>$(1); \
 621                         sed -i "/CONFIG_IPV6_SIT/d" $(1); \
 622                         echo "CONFIG_IPV6_SIT=m" >>$(1); \
 623                         sed -i "/CONFIG_IPV6_SIT_6RD/d" $(1); \
 624                         echo "CONFIG_IPV6_SIT_6RD=y" >>$(1); \
 625                         sed -i "/CONFIG_IPV6_MULTIPLE_TABLES/d" $(1); \
 626                         echo "CONFIG_IPV6_MULTIPLE_TABLES=y" >>$(1); \
 627                         sed -i "/CONFIG_IP6_NF_RAW/d" $(1); \
 628                         echo "CONFIG_IP6_NF_RAW=m" >>$(1); \
 629                         sed -i "/CONFIG_IPV6_OPTIMISTIC_DAD/d" $(1); \
 630                         echo "CONFIG_IPV6_OPTIMISTIC_DAD=y" >>$(1); \
 631                         sed -i "/CONFIG_IPV6_MROUTE/d" $(1); \
 632                         echo "CONFIG_IPV6_MROUTE=y" >>$(1); \
 633                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 634                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 635                         sed -i "/CONFIG_INET6_XFRM_TUNNEL/d" $(1); \
 636                         echo "CONFIG_INET6_XFRM_TUNNEL=m" >>$(1); \
 637                         sed -i "/CONFIG_INET6_AH/d" $(1); \
 638                         echo "CONFIG_INET6_AH=m" >>$(1); \
 639                         sed -i "/CONFIG_INET6_ESP/d" $(1); \
 640                         echo "CONFIG_INET6_ESP=m" >>$(1); \
 641                         sed -i "/CONFIG_INET6_IPCOMP/d" $(1); \
 642                         echo "CONFIG_INET6_IPCOMP=m" >>$(1); \
 643                         sed -i "/CONFIG_INET6_XFRM_MODE_TRANSPORT/d" $(1); \
 644                         echo "CONFIG_INET6_XFRM_MODE_TRANSPORT=m" >>$(1); \
 645                         sed -i "/CONFIG_INET6_XFRM_MODE_TUNNEL/d" $(1); \
 646                         echo "CONFIG_INET6_XFRM_MODE_TUNNEL=m" >>$(1); \
 647                         sed -i "/CONFIG_INET6_XFRM_MODE_BEET/d" $(1); \
 648                         echo "CONFIG_INET6_XFRM_MODE_BEET=m" >>$(1); \
 649                 else \
 650                         sed -i "/CONFIG_IP6_NF_CONNTRACK/d" $(1); \
 651                         echo "CONFIG_IP6_NF_CONNTRACK=m" >>$(1); \
 652                         sed -i "/CONFIG_IP6_NF_MATCH_HL/d" $(1); \
 653                         echo "CONFIG_IP6_NF_MATCH_HL=m" >>$(1); \
 654                         sed -i "/CONFIG_IP6_NF_FTP/d" $(1); \
 655                         echo "CONFIG_IP6_NF_FTP=m" >>$(1); \
 656                         sed -i "/CONFIG_IP6_NF_MATCH_LIMIT/d" $(1); \
 657                         echo "CONFIG_IP6_NF_MATCH_LIMIT=m" >>$(1); \
 658                         sed -i "/CONFIG_IP6_NF_MATCH_CONDITION/d" $(1); \
 659                         echo "CONFIG_IP6_NF_MATCH_CONDITION=m" >>$(1); \
 660                         sed -i "/CONFIG_IP6_NF_MATCH_MAC/d" $(1); \
 661                         echo "CONFIG_IP6_NF_MATCH_MAC=m" >>$(1); \
 662                         sed -i "/CONFIG_IP6_NF_MATCH_MULTIPORT/d" $(1); \
 663                         echo "CONFIG_IP6_NF_MATCH_MULTIPORT=m" >>$(1); \
 664                         sed -i "/CONFIG_IP6_NF_MATCH_MARK/d" $(1); \
 665                         echo "CONFIG_IP6_NF_MATCH_MARK=m" >>$(1); \
 666                         sed -i "/CONFIG_IP6_NF_MATCH_LENGTH/d" $(1); \
 667                         echo "CONFIG_IP6_NF_MATCH_LENGTH=m" >>$(1); \
 668                         sed -i "/CONFIG_IP6_NF_MATCH_STATE/d" $(1); \
 669                         echo "CONFIG_IP6_NF_MATCH_STATE=m" >>$(1); \
 670                         sed -i "/CONFIG_IP6_NF_TARGET_MARK/d" $(1); \
 671                         echo "CONFIG_IP6_NF_TARGET_MARK=m" >>$(1); \
 672                         sed -i "/CONFIG_IP6_NF_TARGET_TCPMSS/d" $(1); \
 673                         echo "CONFIG_IP6_NF_TARGET_TCPMSS=m" >>$(1); \
 674                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 675                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 676                 fi; \
 677         fi; \
 678         sed -i "/CONFIG_BCM57XX/d" $(1); \
 679         if [ "$(BCM57)" = "y" ]; then \
 680                 echo "CONFIG_BCM57XX=m" >>$(1); \
 681         else \
 682                 echo "# CONFIG_BCM57XX is not set" >>$(1); \
 683         fi; \
 684         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(EBTABLES)" = "y" ]; then \
 685                 sed -i "/CONFIG_BRIDGE_NF_EBTABLES/d" $(1); \
 686                 echo "CONFIG_BRIDGE_NF_EBTABLES=m" >>$(1); \
 687                 if [ "$(IPV6SUPP)" = "y" ]; then \
 688                         sed -i "/CONFIG_BRIDGE_EBT_IP6/d" $(1); \
 689                         echo "CONFIG_BRIDGE_EBT_IP6=m" >>$(1); \
 690                 fi; \
 691         fi; \
 692         )
 693 endef
 694
 695
 696 bin:
 697 ifeq ($(B),)
 698         @echo $@" is not a valid target!"
 699         @false
 700 endif
 701         @cp router/config_base router/config_$(lowercase_B)
 702         @cp router/busybox/config_base router/busybox/config_$(lowercase_B)
 703         @cp $(LINUXDIR)/config_base $(LINUXDIR)/config_$(lowercase_B)
 704
 705         $(call RouterOptions, router/config_$(lowercase_B))
 706         $(call KernelConfig, $(LINUXDIR)/config_$(lowercase_B))
 707         $(call BusyboxOptions, router/busybox/config_$(lowercase_B))
 708
 709         @$(MAKE) setprofile N=$(TPROFILE) B=$(B) DESC="$(BUILD_DESC)" USB="$(USB)"
 710         @$(MAKE) all
 711
 712 # Make the "normal" build
 713 a:
 714         @$(MAKE) bin B=A BUILD_DESC="Std" USB="USB" SNMP=y
 715
 716 ## Make the "normal but without SSH" build
 717 b:
 718         @$(MAKE) bin NO_SSH=y B=B BUILD_DESC="No SSH" USB="USB" SNMP=y
 719
 720 ## Make the "normal but without CIFS" build
 721 c:
 722         @$(MAKE) bin NO_CIFS=y B=C BUILD_DESC="No CIFS" USB="USB" SNMP=y
 723
 724 ## Make the "normal but without SAMBA" (Lite) build
 725 d:
 726 ifeq ($(CONFIG_LINUX26),y)
 727         @$(MAKE) bin NO_SAMBA=y SLIM=y NO_CIFS=y NO_JFFS=y NO_ZEBRA=y B=D BUILD_DESC="Lite" USB="USB" SNMP="$(SNMP)"
 728 else
 729         @$(MAKE) bin NO_SAMBA=y SLIM=y B=D BUILD_DESC="Lite" USB="USB"SNMP="$(SNMP)"
 730 endif
 731
 732 ## Make the "normal (with NTFS support) + VPN" build
 733 e:
 734 ifeq ($(CONFIG_LINUX26),y)
 735         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="VPN" USB="USB" SNMP=y TCPDUMP="$(TCPDUMP)"
 736 else
 737 #       @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y B=E BUILD_DESC="VPN)" USB="USB"
 738         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y BBEXTRAS=y USBEXTRAS=y NTFS=y B=E BUILD_DESC="VPN" USB="USB" SNMP=y TCPDUMP="$(TCPDUMP)"
 739 endif
 740
 741 ## Make the "Mini: no USB, no CIFS, no Zebra" build - targeted for Netgear routers
 742 f:
 743         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_SSH=y NO_ZEBRA=y SLIM=y B=F BUILD_DESC="Mini" USB=""
 744
 745 ## Make the "Tiny: no JFFS, no USB, no CIFS, no Zebra" build - targeted for cheapskate routers
 746 fs:
 747         @$(MAKE) bin NO_CIFS=y NO_SSH=y NO_JFFS=y NO_ZEBRA=y SLIM=y B=FS BUILD_DESC="Tiny" USB=""
 748
 749 ## Make the "No USB with IPv6, no Zebra" build - for 4MB routers
 750 i:
 751         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_SSH=y NO_ZEBRA=y IPV6SUPP=y B=I BUILD_DESC="MiniIPv6" USB=""
 752
 753 ## Make the "No USB with IPv6, no Zebra, with VPN" build - for 4MB routers
 754 ifeq ($(CONFIG_LINUX26),y)
 755 j:
 756         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_SSH=y NO_XXTP=y SLIM=y NO_SAMBA=y NO_ZEBRA=y IPV6SUPP=y OPENVPN=y USERPPTP=y NO_LIBOPT=y B=J BUILD_DESC="MiniIPv6-VPN" USB="" SNMP="$(SNMP)"
 757 endif
 758
 759 ## Make the "normal with Extras and NTFS" build
 760 m:
 761 ifeq ($(CONFIG_LINUX26),y)
 762         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Ext" USB="USB" SNMP=y USERPPTP=y  PPTPD=y TCPDUMP="$(TCPDUMP)"
 763 else
 764         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Ext" USB="USB" SNMP=y USERPPTP=y PPTPD=y TCPDUMP="$(TCPDUMP)"
 765 endif
 766
 767 ## Roadkill
 768 ## Make the "normal (with NTFS support) + VPN + NOCAT" build
 769 nc:
 770 ifeq ($(CONFIG_LINUX26),y)
 771         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=NC BUILD_DESC="VPN-NC" USB="USB" SNMP=y NOCAT=y TCPDUMP="$(TCPDUMP)"
 772 else
 773         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y B=NC BUILD_DESC="VPN-NC" USB="USB" NOCAT=y TCPDUMP="$(TCPDUMP)"
 774 endif
 775
 776 ## Toastman
 777 ## Make the "Mini: no USB, + NOCAT" build - for 4MB routers
 778 ncm:
 779         @$(MAKE) bin JFFSv1=y NOCAT=y B=NCM BUILD_DESC="Mini-NOCAT" USB=""
 780
 781 ## Toastman
 782 ## Make the "normal" build + NOCAT
 783 ncs:
 784         @$(MAKE) bin NOCAT=y B=NCS BUILD_DESC="Std-NOCAT" USB="USB" SNMP=y TCPDUMP="$(TCPDUMP)"
 785
 786
 787 ## Make the "No USB" build
 788 s:
 789 ifeq ($(CONFIG_LINUX26),y)
 790         @$(MAKE) bin JFFSv1=y $(if $(filter r2, $(MIPS32)),,BCM57=y) B=S BUILD_DESC="Std" USB="" TCPDUMP="$(TCPDUMP)"
 791 else
 792         @$(MAKE) bin BBEXTRAS=y BCM57=y B=S BUILD_DESC="Std" USB="" TCPDUMP="$(TCPDUMP)"
 793 endif
 794
 795
 796 ## Make the "No USB with Extras" build (K26 only, for 8MB flash)
 797 ifeq ($(CONFIG_LINUX26),y)
 798 t:
 799         @$(MAKE) bin B=T USB="" BBEXTRAS=y EBTABLES=y NO_LIBOPT=y $(if $(filter r2, $(MIPS32)),,BCM57=y) IPV6SUPP=y BUILD_DESC="Std" SNMP=y
 800 ## Make the "No USB with OpenVPN and Extras" build (K26 only, for 8MB flash)
 801 u:
 802         @$(MAKE) bin B=U USB="" BBEXTRAS=y EBTABLES=y NO_LIBOPT=y $(if $(filter r2, $(MIPS32)),,BCM57=y) IPV6SUPP=y OPENVPN=y USERPPTP=y BUILD_DESC="VPN-Ext"  SNMP=y
 803 endif
 804
 805 ## Make the "VPN with no USB support" build
 806 v:
 807 ifeq ($(CONFIG_LINUX26),y)
 808         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NO_JFFS=y BCM57=y B=V BUILD_DESC="VPN" USB="" TCPDUMP="$(TCPDUMP)" TCPDUMP="$(TCPDUMP)"
 809 else
 810         @$(MAKE) bin OPENVPN=y PPTPD=y BBEXTRAS=y B=V BUILD_DESC="VPN" USB=""  SNMP=y TCPDUMP="$(TCPDUMP)" TCPDUMP="$(TCPDUMP)"
 811 endif
 812
 813 ## Make the "Small VPN with no USB support" build
 814 vs:
 815 ifeq ($(CONFIG_LINUX26),y)
 816         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NO_JFFS=y NO_CIFS=y B=VS BUILD_DESC="SmallVPN" USB=""
 817 else
 818         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NO_JFFS=y NO_CIFS=y BCM57=y B=VS BUILD_DESC="SmallVPN" USB=""
 819 endif
 820
 821 ## Make Mips32r2 builds
 822
 823 r2a:
 824         @$(MAKE) a MIPS32=r2
 825
 826 r2b:
 827         @$(MAKE) b MIPS32=r2
 828
 829 r2c:
 830         @$(MAKE) c MIPS32=r2
 831
 832 r2d:
 833         @$(MAKE) d MIPS32=r2
 834
 835 r2e:
 836         @$(MAKE) e MIPS32=r2
 837
 838 r2f:
 839         @$(MAKE) f MIPS32=r2 BELKIN=y
 840
 841 r2fs:
 842         @$(MAKE) fs MIPS32=r2
 843
 844 r2i:
 845         @$(MAKE) i MIPS32=r2
 846
 847 r2j:
 848         @$(MAKE) j MIPS32=r2
 849
 850 r2m:
 851         @$(MAKE) m MIPS32=r2
 852
 853 r2n:
 854         @$(MAKE) n MIPS32=r2
 855
 856 r2nc:
 857         @$(MAKE) nc MIPS32=r2
 858
 859 r2s:
 860         @$(MAKE) s MIPS32=r2
 861
 862 r2t:
 863         @$(MAKE) t MIPS32=r2
 864
 865 r2u:
 866         @$(MAKE) t MIPS32=r2
 867
 868 r2v:
 869         @$(MAKE) v MIPS32=r2
 870
 871 r2vs:
 872         @$(MAKE) vs MIPS32=r2
 873
 874 n60a:
 875         @$(MAKE) r2a NVRAM_SIZE=60 LINKSYS_E=y
 876
 877 n60b:
 878         @$(MAKE) r2b NVRAM_SIZE=60 LINKSYS_E=y
 879
 880 n60c:
 881         @$(MAKE) r2c NVRAM_SIZE=60 LINKSYS_E=y
 882
 883 n60e:
 884         @$(MAKE) r2e NVRAM_SIZE=60 LINKSYS_E=y
 885
 886 n60m:
 887         @$(MAKE) r2m NVRAM_SIZE=60 LINKSYS_E=y
 888
 889 n60n:
 890         @$(MAKE) r2n NVRAM_SIZE=60 LINKSYS_E=y
 891
 892 n60nc:
 893         @$(MAKE) r2nc NVRAM_SIZE=60 LINKSYS_E=y
 894
 895 n60o:
 896         @$(MAKE) r2o NVRAM_SIZE=60 LINKSYS_E=y
 897
 898 n60r:
 899         @$(MAKE) r2r NVRAM_SIZE=60 LINKSYS_E=y
 900
 901 n60s:
 902         @$(MAKE) bin MIPS32=r2 B=S USB="" NVRAM_SIZE=60 LINKSYS_E=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y BUILD_DESC="Std"
 903
 904 n60t:
 905         @$(MAKE) r2t NVRAM_SIZE=60 LINKSYS_E=y
 906
 907 n60v:
 908         @$(MAKE) bin MIPS32=r2 B=V USB="" NVRAM_SIZE=60 LINKSYS_E=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y OPENVPN=y USERPPTP=y BUILD_DESC="VPN"
 909
 910
 911
 912 setprofile:
 913         echo '#ifndef TOMATO_PROFILE' > router/shared/tomato_profile.h
 914         echo '#define TOMATO_$(N) 1' >> router/shared/tomato_profile.h
 915         echo '#define PROFILE_G 1' >> router/shared/tomato_profile.h
 916         echo '#define PROFILE_N 2' >> router/shared/tomato_profile.h
 917         echo '#define TOMATO_PROFILE PROFILE_$(N)' >> router/shared/tomato_profile.h
 918         echo '#define TOMATO_PROFILE_NAME "$(N)"' >> router/shared/tomato_profile.h
 919         echo '#define TOMATO_BUILD_NAME "$(B)"' >> router/shared/tomato_profile.h
 920         echo '#define TOMATO_BUILD_DESC "$(DESC)"' >> router/shared/tomato_profile.h
 921         echo '#ifndef CONFIG_NVRAM_SIZE' >> router/shared/tomato_profile.h
 922         echo '#define CONFIG_NVRAM_SIZE $(NVRAM_SIZE)' >> router/shared/tomato_profile.h
 923         echo '#endif' >> router/shared/tomato_profile.h
 924         echo '#endif' >> router/shared/tomato_profile.h
 925
 926         echo 'TOMATO_$(N) = 1' > tomato_profile.mak
 927         echo 'PROFILE_G = 1' >> tomato_profile.mak
 928         echo 'PROFILE_N = 2' >> tomato_profile.mak
 929         echo 'TOMATO_PROFILE = $$(PROFILE_$(N))' >> tomato_profile.mak
 930         echo 'TOMATO_PROFILE_NAME = "$(N)"' >> tomato_profile.mak
 931         echo 'TOMATO_BUILD = "$(B)"' >> tomato_profile.mak
 932         echo 'TOMATO_BUILD_NAME = "$(B)"' >> tomato_profile.mak
 933         echo 'TOMATO_BUILD_DESC = "$(DESC)"' >> tomato_profile.mak
 934         echo 'TOMATO_PROFILE_L = $(lowercase_N)' >> tomato_profile.mak
 935         echo 'TOMATO_PROFILE_U = $(uppercase_N)' >> tomato_profile.mak
 936         echo 'TOMATO_BUILD_USB = "$(USB)"' >> tomato_profile.mak
 937
 938         echo 'export EXTRACFLAGS := $(EXTRA_CFLAGS) -DBCMWPA2 -funit-at-a-time -Wno-pointer-sign -mtune=mips32 -mips32 $(if $(filter $(NVRAM_SIZE),0),,-DCONFIG_NVRAM_SIZE=$(NVRAM_SIZE))' >> tomato_profile.mak
 939
 940 # Note that changes to variables in tomato_profile.mak don't
 941 # get propogated to this invocation of make!
 942         @echo ""
 943         @echo "Using $(N) profile, $(B) build config."
 944         @echo ""
 945
 946         @cd $(LINUXDIR) ; \
 947                 rm -f config_current ; \
 948                 ln -s config_$(lowercase_B) config_current ; \
 949                 cp -f config_current .config
 950
 951         @cd router/busybox && \
 952                 rm -f config_current ; \
 953                 ln -s config_$(lowercase_B) config_current ; \
 954                 cp config_current .config
 955
 956         @cd router ; \
 957                 rm -f config_current ; \
 958                 ln -s config_$(lowercase_B) config_current ; \
 959                 cp config_current .config
 960
 961         @$(MAKE) -C router oldconfig
 962
 963 help:
 964         @echo "a            A build (standard)"
 965         @echo "b            B build (standard minus SSH)"
 966         @echo "c            C build (standard minus CIFS)"
 967         @echo "d            D build (standard minus Samba server)"
 968         @echo "m            M build (standard plus extra utilities and NTFS support)"
 969         @echo "nc           NC build (standard plus VPN, extra utilities, NTFS support and NOCAT)"
 970         @echo "ncm          NCS build (no USB support, NOCAT)"
 971         @echo "ncs          NCS build (std + NOCAT)"
 972         @echo "m            Ext - (standard plus extra utilities and NTFS support)"
 973
 974 ifeq ($(CONFIG_LINUX26),y)
 975         @echo "e            E build (standard plus VPN, extra utilities and NTFS support)"
 976         @echo "i            I build (IPv6 with no USB support minus CIFS and RIPv1/2)"
 977 else
 978         @echo "e            E build (standard plus VPN and NTFS support)"
 979 endif
 980         @echo "s            S build (no USB support)"
 981         @echo "f            F build (no USB support minus CIFS and RIPv1/2)"
 982         @echo "fs           FS build (no USB support minus CIFS, JFFS, Zebra and RIPv1/2)"
 983         @echo "v            V build (VPN with no USB support)"
 984         @echo "vs           VS build (Small VPN with no USB support)"
 985
 986 ifeq ($(CONFIG_LINUX26),y)
 987         @echo "r2a          MIPS Release 2 A build (standard)"
 988         @echo "r2b          MIPS Release 2 B build (standard minus SSH)"
 989         @echo "r2c          MIPS Release 2 C build (standard minus CIFS)"
 990         @echo "r2d          MIPS Release 2 D build (standard minus Samba server)"
 991         @echo "r2e          MIPS Release 2 E build (standard plus VPN and extras)"
 992         @echo "r2f          MIPS Release 2 F build (no USB minus CIFS, RIPv1/2)"
 993         @echo "r2fs         MIPS Release 2 FS build (no USB minus JFFS, CIFS, RIPv1/2, Zebra) + F5D8235v3, F7D301/2, F7D4302"
 994         @echo "r2i          MIPS Release 2 I build (IPv6 no USB minus CIFS and RIPv1/2)"
 995         @echo "r2m          MIPS Release 2 M build (standard plus extras)"
 996         @echo "r2nc         MIPS Release 2 NC build (standard plus VPN, extras and NOCAT)"
 997         @echo "r2ncm        MIPS Release 2 NCM build (no USB, plus NOCAT)"
 998         @echo "r2ncs        MIPS Release 2 NCS build (standard plus NOCAT)"
 999         @echo "r2s          MIPS Release 2 S build (no USB)"
1000         @echo "r2t          MIPS Release 2 T build (no USB, with extras)"
1001         @echo "r2u          MIPS Release 2 U build (no USB, plus VPN with extras)"
1002         @echo "r2v          MIPS Release 2 V build (VPN with no USB)"
1003         @echo "r2vs         MIPS Release 2 VS build (Small VPN with no USB)"
1004         @echo "n60m         Linksys E-series build (60KB NVRAM, standard plus extras)"
1005         @echo "n60e         Linksys E-series build (60KB NVRAM, standard plus VPN and extras)"
1006         @echo "n60nc        Linksys E-series build (60KB NVRAM, standard plus extras, plus VPN, plus NOCAT)"
1007         @echo "n60s         Linksys E-series build (60KB NVRAM, no USB)"
1008         @echo "n60v         Linksys E-series build (60KB NVRAM, VPN with no USB)"
1009 endif
1010         @echo "..etc..      other build configs"
1011         @echo "clean        -C router clean"
1012         @echo "cleanimage   rm -rf image"
1013         @echo "cleantools   clean btools, mksquashfs"
1014         @echo "cleankernel  -C Linux distclean (but preserves .config)"
1015         @echo "distclean    distclean of Linux & busybox (but preserve .configs)"
1016         @echo "prepk        -C Linux oldconfig dep"
1017
1018 .PHONY: all clean distclean cleanimage cleantools cleankernel prepk what setprofile help
1019 .PHONY: a b c d m nc Makefile allversions tomato_profile.mak