3 # You'll need some development tools which aren't installed by default. To
4 # get these you can install Xcode (which is a free download from Apple):
6 # https://developer.apple.com/xcode/downloads/
8 # To build, open a terminal (Terminal.app in the "Utils" folder in
9 # "Applications") and unpack the downloaded survex source code. E.g. for
12 # tar xf survex-1.2.17.tar.gz
14 # Then change directory into the unpacked sources:
18 # And then run this script:
22 # This will automatically download and temporarily install wxWidgets,
23 # PROJ.4 and FFmpeg in subdirectories of the source tree (this script is smart
24 # enough not to re-download or re-build these if it already has).
26 # If you already have wxWidgets, PROJ.4 and/or FFmpeg installed permanently,
27 # you can disable these by passing one or more extra options - e.g. to build
30 # ./buildmacosx.sh --no-install-wx --no-install-proj --no-install-ffmpeg
32 # If wxWidgets is installed somewhere such that wx-config isn't on your
33 # PATH you need to indicate where wx-config is by running this script
34 # something like this:
36 # env WX_CONFIG=/path/to/wx-config ./buildmacosx.sh
38 # (If you set WX_CONFIG, there's no need to pass --no-install-wx).
40 # If using a pre-installed wxWidgets, note that it must satisfy the
41 # following requirements:
43 # - It must be built with OpenGL support (--with-opengl).
45 # We strongly recommend using wxWidgets >= 3.0, but if you want to build with
46 # wxWidgets 2.8, it probably should be a "Unicode" build (--enable-unicode);
47 # wxWidgets >= 3.0 effectively is always a "Unicode" build, so the
48 # --enable-unicode option isn't needed (and is ignored if specified).
50 # This script builds diskimages which are known to work at least as far back
51 # as OS X 10.6.8. A build of wxWidgets 3.0.2 with the options we pass will
52 # default to assuming at least OS X 10.5, but we've not heard from anyone
53 # trying with such an old version.
55 # Mac OS X support "fat" binaries which contain code for more than one
56 # processor, but the wxWidgets build system doesn't seem to allow creating
57 # these, so we have to choose what processor family to build for. By default
58 # we build for the architecture of the version of OS X the build machine is
59 # running, which on a modern Mac will be x86_64, producing a build which will
60 # only work on 64-bit Intel Macs (but that's probably all machines modern
61 # enough to worry about).
63 # You can specify an arch explicitly on the command-line, e.g. to force a
64 # build for 64-bit Intel Macs:
66 # ./buildmacosx.sh x86_64
68 # Or if you want a build which also works on older 32 bit Intel Macs, then run
69 # this script passing i386 on the command line, like so (assuming your compiler
72 # ./buildmacosx.sh i386
74 # Or to build for much older machines with a Power PC processor, use (again
75 # assuming your compiler supports this):
77 # ./buildmacosx.sh ppc
84 while [ "$#" != 0 ] ; do
99 echo "Usage: $0 [--no-install-wx] [--no-install-proj] [--no-install-ffmpeg] [ppc|i386|x86_86]"
103 echo "Unknown option - try --help" >&2
113 if [ -z "$arch" ] ; then
116 arch_flags
="-arch $arch"
118 # UDBZ means the resultant disk image will only open on OS X 10.4 or above.
119 # UDZO works on 10.1 and later, but is larger, UDCO works on 10.0 as well,
120 # but is larger still.
124 WX_SHA256
=346879dc554f3ab8d6da2704f651ecb504a22e9d31c17ef5449b129ed711585d
127 PROJ_SHA256
=6984542fea333488de5c82eea58d699e4aff4b359200a9971537cd7e047185f7
130 FFMPEG_SHA256
=f8575c071e2a64437aeb70c8c030b385cddbe0b5cde20c9b18a6def840128822
132 if [ -z "${WX_CONFIG+set}" ] && [ "$install_wx" != no
] ; then
133 if test -x WXINSTALL
/bin
/wx-config
; then
136 prefix
=`pwd`/WXINSTALL
137 wxtarball
=wxWidgets-
$WX_VERSION.
tar.bz2
138 test -f "$wxtarball" || \
139 curl
-L -O "http://downloads.sourceforge.net/project/wxwindows/$WX_VERSION/$wxtarball"
140 if echo "$WX_SHA256 $wxtarball" | shasum
-a256 -c ; then
143 echo "Checksum of downloaded file '$wxtarball' is incorrect, aborting."
146 echo "+++ Extracting $wxtarball"
147 test -d "wxWidgets-$WX_VERSION" ||
tar xf
"$wxtarball"
148 test -d "wxWidgets-$WX_VERSION/BUILD" || mkdir
"wxWidgets-$WX_VERSION/BUILD"
149 cd "wxWidgets-$WX_VERSION/BUILD"
150 # Compilation of wx 3.0.2 fails on OS X 10.10.1 with webview enabled.
151 # A build with liblzma enabled doesn't work on OS X 10.6.8.
152 ..
/configure
--disable-shared --prefix="$prefix" \
153 --with-opengl --enable-display \
154 --disable-webview --without-liblzma \
155 CC
="gcc $arch_flags" CXX
="g++ $arch_flags"
160 WX_CONFIG
=`pwd`/WXINSTALL
/bin
/wx-config
164 CXX
=`$WX_CONFIG --cxx`
166 if [ "$install_proj" != no
] ; then
167 if test -f PROJINSTALL
/include
/proj_api.h
; then
170 prefix
=`pwd`/PROJINSTALL
171 projtarball
=proj-
$PROJ_VERSION.
tar.gz
172 test -f "$projtarball" || \
173 curl
-O "http://download.osgeo.org/proj/$projtarball"
174 if echo "$PROJ_SHA256 $projtarball" | shasum
-a256 -c ; then
177 echo "Checksum of downloaded file '$projtarball' is incorrect, aborting."
180 echo "+++ Extracting $projtarball"
181 test -d "proj-$PROJ_VERSION" ||
tar xf
"$projtarball"
182 test -d "proj-$PROJ_VERSION/BUILD" || mkdir
"proj-$PROJ_VERSION/BUILD"
183 cd "proj-$PROJ_VERSION/BUILD"
184 ..
/configure
--disable-shared --prefix="$prefix" CC
="$CC" CXX
="$CXX"
191 if [ "$install_ffmpeg" != no
] ; then
192 if test -f FFMPEGINSTALL
/include
/libavcodec
/avcodec.h
; then
195 prefix
=`pwd`/FFMPEGINSTALL
196 ffmpegtarball
=ffmpeg-
$FFMPEG_VERSION.
tar.xz
197 test -f "$ffmpegtarball" || \
198 curl
-O "https://ffmpeg.org/releases/$ffmpegtarball"
199 if echo "$FFMPEG_SHA256 $ffmpegtarball" | shasum
-a256 -c ; then
202 echo "Checksum of downloaded file '$ffmpegtarball' is incorrect, aborting."
205 echo "+++ Extracting $ffmpegtarball"
206 test -d "ffmpeg-$FFMPEG_VERSION" ||
tar xf
"$ffmpegtarball"
207 test -d "ffmpeg-$FFMPEG_VERSION/BUILD" || mkdir
"ffmpeg-$FFMPEG_VERSION/BUILD"
208 cd "ffmpeg-$FFMPEG_VERSION/BUILD"
209 FFMPEG_CONFIGURE_OPTS
='--disable-shared --disable-programs --disable-network --disable-bsfs --disable-protocols --disable-devices'
210 # We don't need to decode video, but disabling these causes a link failure
212 # --disable-decoders --disable-demuxers
213 if ! nasm
-hf|
grep -q macho64
; then
214 # nasm needs to support macho64, at least for x86_64 builds.
215 FFMPEG_CONFIGURE_OPTS
="$FFMPEG_CONFIGURE_OPTS --disable-yasm"
217 ..
/configure
--prefix="$prefix" --cc="$CC" $FFMPEG_CONFIGURE_OPTS
224 test -n "$WX_CONFIG" || WX_CONFIG
=`which wx-config`
225 if test -z "$WX_CONFIG" ; then
226 echo "WX_CONFIG not set and wx-config not on your PATH"
229 # Force static linking so the user doesn't need to install wxWidgets.
230 WX_CONFIG
=$WX_CONFIG' --static'
231 rm -rf *.dmg Survex macosxtmp
235 PKG_CONFIG_PATH
=$C/PROJINSTALL
/lib
/pkgconfig
:$C/FFMPEGINSTALL
/lib
/pkgconfig
236 export PKG_CONFIG_PATH
237 .
/configure
--prefix="$D" --bindir="$D" --mandir="$T" \
238 WX_CONFIG
="$WX_CONFIG" CC
="$CC" CXX
="$CXX"
241 #mv Survex/survex Survex/Survex
243 # Construct the Aven application bundle.
244 mkdir
-p Survex
/Aven.app
/Contents
/MacOS Survex
/Aven.app
/Contents
/Resources
245 cp lib
/Info.plist Survex
/Aven.app
/Contents
246 printf APPLAVEN
> Survex
/Aven.app
/Contents
/PkgInfo
247 mv Survex
/share
/doc
/survex Survex
/Docs
248 rmdir Survex
/share
/doc
249 mv Survex
/share
/survex
/images Survex
/Aven.app
/Contents
/Resources
/
250 mv Survex
/share
/survex
/unifont.pixelfont Survex
/Aven.app
/Contents
/Resources
/
251 ln Survex
/share
/survex
/*.msg Survex
/Aven.app
/Contents
/Resources
/
252 mv Survex
/aven Survex
/Aven.app
/Contents
/MacOS
/
253 ln Survex
/cavern Survex
/extend Survex
/Aven.app
/Contents
/MacOS
/
254 rm -rf Survex
/share
/applications Survex
/share
/icons Survex
/share
/mime-info
255 mkdir Survex
/share
/survex
/proj
256 cp -p PROJINSTALL
/share
/proj
/epsg PROJINSTALL
/share
/proj
/esri Survex
/share
/survex
/proj
257 mkdir Survex
/Aven.app
/Contents
/Resources
/proj
258 ln Survex
/share
/survex
/proj
/* Survex
/Aven.app
/Contents
/Resources
/proj
260 # Create .icns files in the bundle's "Resources" directory.
261 for zip in lib
/icons
/*.iconset.
zip ; do
262 unzip -d Survex
/Aven.app
/Contents
/Resources
"$zip"
263 i
=`echo "$zip"|sed 's!.*/\(.*\)\.zip$!\1!'`
264 iconutil
--convert icns
"Survex/Aven.app/Contents/Resources/$i"
265 rm -rf "Survex/Aven.app/Contents/Resources/$i"
268 size
=`du -s Survex|sed 's/[^0-9].*//'`
269 # Allow 1500 extra sectors for various overheads (1000 wasn't enough).
270 sectors
=`expr 1500 + "$size"`
271 # Partition needs to be at least 4M and sectors are 512 bytes.
272 if test "$sectors" -lt 8192 ; then
275 echo "Creating new blank image survex-macosx.dmg of $sectors sectors"
276 # This creates the diskimage file and initialises it as an HFS+ volume.
277 hdiutil create
-sectors "$sectors" survex-macosx
-layout NONE
-fs HFS
+ -volname Survex
279 echo "Presenting image to the filesystems for mounting."
280 # This will mount the image onto the Desktop.
281 # Get the name of the device it is mounted on and the mount point.
284 # "The output of [hdiutil] attach has been stable since OS X 10.0 (though it
285 # was called hdid(8) then) and is intended to be program-readable. It consists
286 # of the /dev node, a tab, a content hint (if applicable), another tab, and a
287 # mount point (if any filesystems were mounted)."
289 # In reality, it seems there are also some spaces before each tab character.
290 hdid_output
=`hdid survex-macosx.dmg|tail -1`
291 echo "Last line of hdid output was: $hdid_output"
292 dev
=`echo "$hdid_output"|sed 's!/dev/\([^ ]*\).*!\1!'`
293 mount_point
=`echo "$hdid_output"|sed 's!.* !!'`
295 echo "Device $dev mounted on $mount_point, copying files into image."
296 ditto
-rsrcFork Survex
"$mount_point/Survex"
297 ditto lib
/INSTALL.OSX
"$mount_point/INSTALL"
299 echo "Detaching image."
300 hdiutil detach
"$dev"
302 version
=`sed 's/^VERSION *= *//p;d' Makefile`
303 file=survex-macosx-
$version.dmg
304 echo "Compressing image file survex-macosx.dmg to $file"
305 hdiutil convert survex-macosx.dmg
-format "$dmg_format" -o "$file"
308 echo "$file created successfully."