4 ** The author disclaims copyright to this source code. In place of
5 ** a legal notice, here is a blessing:
7 ** May you do good and not evil.
8 ** May you find forgiveness for yourself and forgive others.
9 ** May you share freely, never taking more than you give.
11 ******************************************************************************
13 ** This file contains code that is specific to Windows.
15 #include "sqliteInt.h"
16 #if SQLITE_OS_WIN /* This file is used for Windows only */
19 ** Include code that is common to all os_*.c files
21 #include "os_common.h"
24 ** Include the header file for the Windows VFS.
29 ** Compiling and using WAL mode requires several APIs that are only
30 ** available in Windows platforms based on the NT kernel.
32 #if !SQLITE_OS_WINNT && !defined(SQLITE_OMIT_WAL)
33 # error "WAL mode requires support from the Windows NT kernel, compile\
34 with SQLITE_OMIT_WAL."
37 #if !SQLITE_OS_WINNT && SQLITE_MAX_MMAP_SIZE>0
38 # error "Memory mapped files require support from the Windows NT kernel,\
39 compile with SQLITE_MAX_MMAP_SIZE=0."
43 ** Are most of the Win32 ANSI APIs available (i.e. with certain exceptions
44 ** based on the sub-platform)?
46 #if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && !defined(SQLITE_WIN32_NO_ANSI)
47 # define SQLITE_WIN32_HAS_ANSI
51 ** Are most of the Win32 Unicode APIs available (i.e. with certain exceptions
52 ** based on the sub-platform)?
54 #if (SQLITE_OS_WINCE || SQLITE_OS_WINNT || SQLITE_OS_WINRT) && \
55 !defined(SQLITE_WIN32_NO_WIDE)
56 # define SQLITE_WIN32_HAS_WIDE
60 ** Make sure at least one set of Win32 APIs is available.
62 #if !defined(SQLITE_WIN32_HAS_ANSI) && !defined(SQLITE_WIN32_HAS_WIDE)
63 # error "At least one of SQLITE_WIN32_HAS_ANSI and SQLITE_WIN32_HAS_WIDE\
68 ** Define the required Windows SDK version constants if they are not
72 # define NTDDI_WIN8 0x06020000
76 # define NTDDI_WINBLUE 0x06030000
79 #ifndef NTDDI_WINTHRESHOLD
80 # define NTDDI_WINTHRESHOLD 0x06040000
84 ** Check to see if the GetVersionEx[AW] functions are deprecated on the
85 ** target system. GetVersionEx was first deprecated in Win8.1.
87 #ifndef SQLITE_WIN32_GETVERSIONEX
88 # if defined(NTDDI_VERSION) && NTDDI_VERSION >= NTDDI_WINBLUE
89 # define SQLITE_WIN32_GETVERSIONEX 0 /* GetVersionEx() is deprecated */
91 # define SQLITE_WIN32_GETVERSIONEX 1 /* GetVersionEx() is current */
96 ** Check to see if the CreateFileMappingA function is supported on the
97 ** target system. It is unavailable when using "mincore.lib" on Win10.
98 ** When compiling for Windows 10, always assume "mincore.lib" is in use.
100 #ifndef SQLITE_WIN32_CREATEFILEMAPPINGA
101 # if defined(NTDDI_VERSION) && NTDDI_VERSION >= NTDDI_WINTHRESHOLD
102 # define SQLITE_WIN32_CREATEFILEMAPPINGA 0
104 # define SQLITE_WIN32_CREATEFILEMAPPINGA 1
109 ** This constant should already be defined (in the "WinDef.h" SDK file).
112 # define MAX_PATH (260)
116 ** Maximum pathname length (in chars) for Win32. This should normally be
119 #ifndef SQLITE_WIN32_MAX_PATH_CHARS
120 # define SQLITE_WIN32_MAX_PATH_CHARS (MAX_PATH)
124 ** This constant should already be defined (in the "WinNT.h" SDK file).
126 #ifndef UNICODE_STRING_MAX_CHARS
127 # define UNICODE_STRING_MAX_CHARS (32767)
131 ** Maximum pathname length (in chars) for WinNT. This should normally be
132 ** UNICODE_STRING_MAX_CHARS.
134 #ifndef SQLITE_WINNT_MAX_PATH_CHARS
135 # define SQLITE_WINNT_MAX_PATH_CHARS (UNICODE_STRING_MAX_CHARS)
139 ** Maximum pathname length (in bytes) for Win32. The MAX_PATH macro is in
140 ** characters, so we allocate 4 bytes per character assuming worst-case of
141 ** 4-bytes-per-character for UTF8.
143 #ifndef SQLITE_WIN32_MAX_PATH_BYTES
144 # define SQLITE_WIN32_MAX_PATH_BYTES (SQLITE_WIN32_MAX_PATH_CHARS*4)
148 ** Maximum pathname length (in bytes) for WinNT. This should normally be
149 ** UNICODE_STRING_MAX_CHARS * sizeof(WCHAR).
151 #ifndef SQLITE_WINNT_MAX_PATH_BYTES
152 # define SQLITE_WINNT_MAX_PATH_BYTES \
153 (sizeof(WCHAR) * SQLITE_WINNT_MAX_PATH_CHARS)
157 ** Maximum error message length (in chars) for WinRT.
159 #ifndef SQLITE_WIN32_MAX_ERRMSG_CHARS
160 # define SQLITE_WIN32_MAX_ERRMSG_CHARS (1024)
164 ** Returns non-zero if the character should be treated as a directory
168 # define winIsDirSep(a) (((a) == '/') || ((a) == '\\'))
172 ** This macro is used when a local variable is set to a value that is
173 ** [sometimes] not used by the code (e.g. via conditional compilation).
175 #ifndef UNUSED_VARIABLE_VALUE
176 # define UNUSED_VARIABLE_VALUE(x) (void)(x)
180 ** Returns the character that should be used as the directory separator.
183 # define winGetDirSep() '\\'
187 ** Do we need to manually define the Win32 file mapping APIs for use with WAL
188 ** mode or memory mapped files (e.g. these APIs are available in the Windows
189 ** CE SDK; however, they are not present in the header file)?
191 #if SQLITE_WIN32_FILEMAPPING_API && \
192 (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0)
194 ** Two of the file mapping APIs are different under WinRT. Figure out which
198 WINBASEAPI HANDLE WINAPI
CreateFileMappingFromApp(HANDLE
, \
199 LPSECURITY_ATTRIBUTES
, ULONG
, ULONG64
, LPCWSTR
);
201 WINBASEAPI LPVOID WINAPI
MapViewOfFileFromApp(HANDLE
, ULONG
, ULONG64
, SIZE_T
);
203 #if defined(SQLITE_WIN32_HAS_ANSI)
204 WINBASEAPI HANDLE WINAPI
CreateFileMappingA(HANDLE
, LPSECURITY_ATTRIBUTES
, \
205 DWORD
, DWORD
, DWORD
, LPCSTR
);
206 #endif /* defined(SQLITE_WIN32_HAS_ANSI) */
208 #if defined(SQLITE_WIN32_HAS_WIDE)
209 WINBASEAPI HANDLE WINAPI
CreateFileMappingW(HANDLE
, LPSECURITY_ATTRIBUTES
, \
210 DWORD
, DWORD
, DWORD
, LPCWSTR
);
211 #endif /* defined(SQLITE_WIN32_HAS_WIDE) */
213 WINBASEAPI LPVOID WINAPI
MapViewOfFile(HANDLE
, DWORD
, DWORD
, DWORD
, SIZE_T
);
214 #endif /* SQLITE_OS_WINRT */
217 ** These file mapping APIs are common to both Win32 and WinRT.
220 WINBASEAPI BOOL WINAPI
FlushViewOfFile(LPCVOID
, SIZE_T
);
221 WINBASEAPI BOOL WINAPI
UnmapViewOfFile(LPCVOID
);
222 #endif /* SQLITE_WIN32_FILEMAPPING_API */
225 ** Some Microsoft compilers lack this definition.
227 #ifndef INVALID_FILE_ATTRIBUTES
228 # define INVALID_FILE_ATTRIBUTES ((DWORD)-1)
231 #ifndef FILE_FLAG_MASK
232 # define FILE_FLAG_MASK (0xFF3C0000)
235 #ifndef FILE_ATTRIBUTE_MASK
236 # define FILE_ATTRIBUTE_MASK (0x0003FFF7)
239 #ifndef SQLITE_OMIT_WAL
240 /* Forward references to structures used for WAL */
241 typedef struct winShm winShm
; /* A connection to shared-memory */
242 typedef struct winShmNode winShmNode
; /* A region of shared-memory */
246 ** WinCE lacks native support for file locking so we have to fake it
247 ** with some code of our own.
250 typedef struct winceLock
{
251 int nReaders
; /* Number of reader locks obtained */
252 BOOL bPending
; /* Indicates a pending lock has been obtained */
253 BOOL bReserved
; /* Indicates a reserved lock has been obtained */
254 BOOL bExclusive
; /* Indicates an exclusive lock has been obtained */
259 ** The winFile structure is a subclass of sqlite3_file* specific to the win32
260 ** portability layer.
262 typedef struct winFile winFile
;
264 const sqlite3_io_methods
*pMethod
; /*** Must be first ***/
265 sqlite3_vfs
*pVfs
; /* The VFS used to open this file */
266 HANDLE h
; /* Handle for accessing the file */
267 u8 locktype
; /* Type of lock currently held on this file */
268 short sharedLockByte
; /* Randomly chosen byte used as a shared lock */
269 u8 ctrlFlags
; /* Flags. See WINFILE_* below */
270 DWORD lastErrno
; /* The Windows errno from the last I/O error */
271 #ifndef SQLITE_OMIT_WAL
272 winShm
*pShm
; /* Instance of shared memory on this file */
274 const char *zPath
; /* Full pathname of this file */
275 int szChunk
; /* Chunk size configured by FCNTL_CHUNK_SIZE */
277 LPWSTR zDeleteOnClose
; /* Name of file to delete when closing */
278 HANDLE hMutex
; /* Mutex used to control access to shared lock */
279 HANDLE hShared
; /* Shared memory segment used for locking */
280 winceLock local
; /* Locks obtained by this instance of winFile */
281 winceLock
*shared
; /* Global shared lock memory for the file */
283 #if SQLITE_MAX_MMAP_SIZE>0
284 int nFetchOut
; /* Number of outstanding xFetch references */
285 HANDLE hMap
; /* Handle for accessing memory mapping */
286 void *pMapRegion
; /* Area memory mapped */
287 sqlite3_int64 mmapSize
; /* Usable size of mapped region */
288 sqlite3_int64 mmapSizeActual
; /* Actual size of mapped region */
289 sqlite3_int64 mmapSizeMax
; /* Configured FCNTL_MMAP_SIZE value */
294 ** The winVfsAppData structure is used for the pAppData member for all of the
295 ** Win32 VFS variants.
297 typedef struct winVfsAppData winVfsAppData
;
298 struct winVfsAppData
{
299 const sqlite3_io_methods
*pMethod
; /* The file I/O methods to use. */
300 void *pAppData
; /* The extra pAppData, if any. */
301 BOOL bNoLock
; /* Non-zero if locking is disabled. */
305 ** Allowed values for winFile.ctrlFlags
307 #define WINFILE_RDONLY 0x02 /* Connection is read only */
308 #define WINFILE_PERSIST_WAL 0x04 /* Persistent WAL mode */
309 #define WINFILE_PSOW 0x10 /* SQLITE_IOCAP_POWERSAFE_OVERWRITE */
312 * The size of the buffer used by sqlite3_win32_write_debug().
314 #ifndef SQLITE_WIN32_DBG_BUF_SIZE
315 # define SQLITE_WIN32_DBG_BUF_SIZE ((int)(4096-sizeof(DWORD)))
319 * The value used with sqlite3_win32_set_directory() to specify that
320 * the data directory should be changed.
322 #ifndef SQLITE_WIN32_DATA_DIRECTORY_TYPE
323 # define SQLITE_WIN32_DATA_DIRECTORY_TYPE (1)
327 * The value used with sqlite3_win32_set_directory() to specify that
328 * the temporary directory should be changed.
330 #ifndef SQLITE_WIN32_TEMP_DIRECTORY_TYPE
331 # define SQLITE_WIN32_TEMP_DIRECTORY_TYPE (2)
335 * If compiled with SQLITE_WIN32_MALLOC on Windows, we will use the
336 * various Win32 API heap functions instead of our own.
338 #ifdef SQLITE_WIN32_MALLOC
341 * If this is non-zero, an isolated heap will be created by the native Win32
342 * allocator subsystem; otherwise, the default process heap will be used. This
343 * setting has no effect when compiling for WinRT. By default, this is enabled
344 * and an isolated heap will be created to store all allocated data.
346 ******************************************************************************
347 * WARNING: It is important to note that when this setting is non-zero and the
348 * winMemShutdown function is called (e.g. by the sqlite3_shutdown
349 * function), all data that was allocated using the isolated heap will
350 * be freed immediately and any attempt to access any of that freed
351 * data will almost certainly result in an immediate access violation.
352 ******************************************************************************
354 #ifndef SQLITE_WIN32_HEAP_CREATE
355 # define SQLITE_WIN32_HEAP_CREATE (TRUE)
359 * This is the maximum possible initial size of the Win32-specific heap, in
362 #ifndef SQLITE_WIN32_HEAP_MAX_INIT_SIZE
363 # define SQLITE_WIN32_HEAP_MAX_INIT_SIZE (4294967295U)
367 * This is the extra space for the initial size of the Win32-specific heap,
368 * in bytes. This value may be zero.
370 #ifndef SQLITE_WIN32_HEAP_INIT_EXTRA
371 # define SQLITE_WIN32_HEAP_INIT_EXTRA (4194304)
375 * Calculate the maximum legal cache size, in pages, based on the maximum
376 * possible initial heap size and the default page size, setting aside the
377 * needed extra space.
379 #ifndef SQLITE_WIN32_MAX_CACHE_SIZE
380 # define SQLITE_WIN32_MAX_CACHE_SIZE (((SQLITE_WIN32_HEAP_MAX_INIT_SIZE) - \
381 (SQLITE_WIN32_HEAP_INIT_EXTRA)) / \
382 (SQLITE_DEFAULT_PAGE_SIZE))
386 * This is cache size used in the calculation of the initial size of the
387 * Win32-specific heap. It cannot be negative.
389 #ifndef SQLITE_WIN32_CACHE_SIZE
390 # if SQLITE_DEFAULT_CACHE_SIZE>=0
391 # define SQLITE_WIN32_CACHE_SIZE (SQLITE_DEFAULT_CACHE_SIZE)
393 # define SQLITE_WIN32_CACHE_SIZE (-(SQLITE_DEFAULT_CACHE_SIZE))
398 * Make sure that the calculated cache size, in pages, cannot cause the
399 * initial size of the Win32-specific heap to exceed the maximum amount
400 * of memory that can be specified in the call to HeapCreate.
402 #if SQLITE_WIN32_CACHE_SIZE>SQLITE_WIN32_MAX_CACHE_SIZE
403 # undef SQLITE_WIN32_CACHE_SIZE
404 # define SQLITE_WIN32_CACHE_SIZE (2000)
408 * The initial size of the Win32-specific heap. This value may be zero.
410 #ifndef SQLITE_WIN32_HEAP_INIT_SIZE
411 # define SQLITE_WIN32_HEAP_INIT_SIZE ((SQLITE_WIN32_CACHE_SIZE) * \
412 (SQLITE_DEFAULT_PAGE_SIZE) + \
413 (SQLITE_WIN32_HEAP_INIT_EXTRA))
417 * The maximum size of the Win32-specific heap. This value may be zero.
419 #ifndef SQLITE_WIN32_HEAP_MAX_SIZE
420 # define SQLITE_WIN32_HEAP_MAX_SIZE (0)
424 * The extra flags to use in calls to the Win32 heap APIs. This value may be
425 * zero for the default behavior.
427 #ifndef SQLITE_WIN32_HEAP_FLAGS
428 # define SQLITE_WIN32_HEAP_FLAGS (0)
433 ** The winMemData structure stores information required by the Win32-specific
434 ** sqlite3_mem_methods implementation.
436 typedef struct winMemData winMemData
;
439 u32 magic1
; /* Magic number to detect structure corruption. */
441 HANDLE hHeap
; /* The handle to our heap. */
442 BOOL bOwned
; /* Do we own the heap (i.e. destroy it on shutdown)? */
444 u32 magic2
; /* Magic number to detect structure corruption. */
449 #define WINMEM_MAGIC1 0x42b2830b
450 #define WINMEM_MAGIC2 0xbd4d7cf4
453 static struct winMemData win_mem_data
= {
464 #define winMemAssertMagic1() assert( win_mem_data.magic1==WINMEM_MAGIC1 )
465 #define winMemAssertMagic2() assert( win_mem_data.magic2==WINMEM_MAGIC2 )
466 #define winMemAssertMagic() winMemAssertMagic1(); winMemAssertMagic2();
468 #define winMemAssertMagic()
471 #define winMemGetDataPtr() &win_mem_data
472 #define winMemGetHeap() win_mem_data.hHeap
473 #define winMemGetOwned() win_mem_data.bOwned
475 static void *winMemMalloc(int nBytes
);
476 static void winMemFree(void *pPrior
);
477 static void *winMemRealloc(void *pPrior
, int nBytes
);
478 static int winMemSize(void *p
);
479 static int winMemRoundup(int n
);
480 static int winMemInit(void *pAppData
);
481 static void winMemShutdown(void *pAppData
);
483 const sqlite3_mem_methods
*sqlite3MemGetWin32(void);
484 #endif /* SQLITE_WIN32_MALLOC */
487 ** The following variable is (normally) set once and never changes
488 ** thereafter. It records whether the operating system is Win9x
491 ** 0: Operating system unknown.
492 ** 1: Operating system is Win9x.
493 ** 2: Operating system is WinNT.
495 ** In order to facilitate testing on a WinNT system, the test fixture
496 ** can manually set this value to 1 to emulate Win98 behavior.
499 LONG SQLITE_WIN32_VOLATILE sqlite3_os_type
= 0;
501 static LONG SQLITE_WIN32_VOLATILE sqlite3_os_type
= 0;
505 # define SYSCALL sqlite3_syscall_ptr
509 ** This function is not available on Windows CE or WinRT.
512 #if SQLITE_OS_WINCE || SQLITE_OS_WINRT
513 # define osAreFileApisANSI() 1
517 ** Many system calls are accessed through pointer-to-functions so that
518 ** they may be overridden at runtime to facilitate fault injection during
519 ** testing and sandboxing. The following array holds the names and pointers
520 ** to all overrideable system calls.
522 static struct win_syscall
{
523 const char *zName
; /* Name of the system call */
524 sqlite3_syscall_ptr pCurrent
; /* Current value of the system call */
525 sqlite3_syscall_ptr pDefault
; /* Default value */
527 #if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT
528 { "AreFileApisANSI", (SYSCALL
)AreFileApisANSI
, 0 },
530 { "AreFileApisANSI", (SYSCALL
)0, 0 },
533 #ifndef osAreFileApisANSI
534 #define osAreFileApisANSI ((BOOL(WINAPI*)(VOID))aSyscall[0].pCurrent)
537 #if SQLITE_OS_WINCE && defined(SQLITE_WIN32_HAS_WIDE)
538 { "CharLowerW", (SYSCALL
)CharLowerW
, 0 },
540 { "CharLowerW", (SYSCALL
)0, 0 },
543 #define osCharLowerW ((LPWSTR(WINAPI*)(LPWSTR))aSyscall[1].pCurrent)
545 #if SQLITE_OS_WINCE && defined(SQLITE_WIN32_HAS_WIDE)
546 { "CharUpperW", (SYSCALL
)CharUpperW
, 0 },
548 { "CharUpperW", (SYSCALL
)0, 0 },
551 #define osCharUpperW ((LPWSTR(WINAPI*)(LPWSTR))aSyscall[2].pCurrent)
553 { "CloseHandle", (SYSCALL
)CloseHandle
, 0 },
555 #define osCloseHandle ((BOOL(WINAPI*)(HANDLE))aSyscall[3].pCurrent)
557 #if defined(SQLITE_WIN32_HAS_ANSI)
558 { "CreateFileA", (SYSCALL
)CreateFileA
, 0 },
560 { "CreateFileA", (SYSCALL
)0, 0 },
563 #define osCreateFileA ((HANDLE(WINAPI*)(LPCSTR,DWORD,DWORD, \
564 LPSECURITY_ATTRIBUTES,DWORD,DWORD,HANDLE))aSyscall[4].pCurrent)
566 #if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE)
567 { "CreateFileW", (SYSCALL
)CreateFileW
, 0 },
569 { "CreateFileW", (SYSCALL
)0, 0 },
572 #define osCreateFileW ((HANDLE(WINAPI*)(LPCWSTR,DWORD,DWORD, \
573 LPSECURITY_ATTRIBUTES,DWORD,DWORD,HANDLE))aSyscall[5].pCurrent)
575 #if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_ANSI) && \
576 (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0) && \
577 SQLITE_WIN32_CREATEFILEMAPPINGA
578 { "CreateFileMappingA", (SYSCALL
)CreateFileMappingA
, 0 },
580 { "CreateFileMappingA", (SYSCALL
)0, 0 },
583 #define osCreateFileMappingA ((HANDLE(WINAPI*)(HANDLE,LPSECURITY_ATTRIBUTES, \
584 DWORD,DWORD,DWORD,LPCSTR))aSyscall[6].pCurrent)
586 #if SQLITE_OS_WINCE || (!SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE) && \
587 (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0))
588 { "CreateFileMappingW", (SYSCALL
)CreateFileMappingW
, 0 },
590 { "CreateFileMappingW", (SYSCALL
)0, 0 },
593 #define osCreateFileMappingW ((HANDLE(WINAPI*)(HANDLE,LPSECURITY_ATTRIBUTES, \
594 DWORD,DWORD,DWORD,LPCWSTR))aSyscall[7].pCurrent)
596 #if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE)
597 { "CreateMutexW", (SYSCALL
)CreateMutexW
, 0 },
599 { "CreateMutexW", (SYSCALL
)0, 0 },
602 #define osCreateMutexW ((HANDLE(WINAPI*)(LPSECURITY_ATTRIBUTES,BOOL, \
603 LPCWSTR))aSyscall[8].pCurrent)
605 #if defined(SQLITE_WIN32_HAS_ANSI)
606 { "DeleteFileA", (SYSCALL
)DeleteFileA
, 0 },
608 { "DeleteFileA", (SYSCALL
)0, 0 },
611 #define osDeleteFileA ((BOOL(WINAPI*)(LPCSTR))aSyscall[9].pCurrent)
613 #if defined(SQLITE_WIN32_HAS_WIDE)
614 { "DeleteFileW", (SYSCALL
)DeleteFileW
, 0 },
616 { "DeleteFileW", (SYSCALL
)0, 0 },
619 #define osDeleteFileW ((BOOL(WINAPI*)(LPCWSTR))aSyscall[10].pCurrent)
622 { "FileTimeToLocalFileTime", (SYSCALL
)FileTimeToLocalFileTime
, 0 },
624 { "FileTimeToLocalFileTime", (SYSCALL
)0, 0 },
627 #define osFileTimeToLocalFileTime ((BOOL(WINAPI*)(CONST FILETIME*, \
628 LPFILETIME))aSyscall[11].pCurrent)
631 { "FileTimeToSystemTime", (SYSCALL
)FileTimeToSystemTime
, 0 },
633 { "FileTimeToSystemTime", (SYSCALL
)0, 0 },
636 #define osFileTimeToSystemTime ((BOOL(WINAPI*)(CONST FILETIME*, \
637 LPSYSTEMTIME))aSyscall[12].pCurrent)
639 { "FlushFileBuffers", (SYSCALL
)FlushFileBuffers
, 0 },
641 #define osFlushFileBuffers ((BOOL(WINAPI*)(HANDLE))aSyscall[13].pCurrent)
643 #if defined(SQLITE_WIN32_HAS_ANSI)
644 { "FormatMessageA", (SYSCALL
)FormatMessageA
, 0 },
646 { "FormatMessageA", (SYSCALL
)0, 0 },
649 #define osFormatMessageA ((DWORD(WINAPI*)(DWORD,LPCVOID,DWORD,DWORD,LPSTR, \
650 DWORD,va_list*))aSyscall[14].pCurrent)
652 #if defined(SQLITE_WIN32_HAS_WIDE)
653 { "FormatMessageW", (SYSCALL
)FormatMessageW
, 0 },
655 { "FormatMessageW", (SYSCALL
)0, 0 },
658 #define osFormatMessageW ((DWORD(WINAPI*)(DWORD,LPCVOID,DWORD,DWORD,LPWSTR, \
659 DWORD,va_list*))aSyscall[15].pCurrent)
661 #if !defined(SQLITE_OMIT_LOAD_EXTENSION)
662 { "FreeLibrary", (SYSCALL
)FreeLibrary
, 0 },
664 { "FreeLibrary", (SYSCALL
)0, 0 },
667 #define osFreeLibrary ((BOOL(WINAPI*)(HMODULE))aSyscall[16].pCurrent)
669 { "GetCurrentProcessId", (SYSCALL
)GetCurrentProcessId
, 0 },
671 #define osGetCurrentProcessId ((DWORD(WINAPI*)(VOID))aSyscall[17].pCurrent)
673 #if !SQLITE_OS_WINCE && defined(SQLITE_WIN32_HAS_ANSI)
674 { "GetDiskFreeSpaceA", (SYSCALL
)GetDiskFreeSpaceA
, 0 },
676 { "GetDiskFreeSpaceA", (SYSCALL
)0, 0 },
679 #define osGetDiskFreeSpaceA ((BOOL(WINAPI*)(LPCSTR,LPDWORD,LPDWORD,LPDWORD, \
680 LPDWORD))aSyscall[18].pCurrent)
682 #if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE)
683 { "GetDiskFreeSpaceW", (SYSCALL
)GetDiskFreeSpaceW
, 0 },
685 { "GetDiskFreeSpaceW", (SYSCALL
)0, 0 },
688 #define osGetDiskFreeSpaceW ((BOOL(WINAPI*)(LPCWSTR,LPDWORD,LPDWORD,LPDWORD, \
689 LPDWORD))aSyscall[19].pCurrent)
691 #if defined(SQLITE_WIN32_HAS_ANSI)
692 { "GetFileAttributesA", (SYSCALL
)GetFileAttributesA
, 0 },
694 { "GetFileAttributesA", (SYSCALL
)0, 0 },
697 #define osGetFileAttributesA ((DWORD(WINAPI*)(LPCSTR))aSyscall[20].pCurrent)
699 #if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE)
700 { "GetFileAttributesW", (SYSCALL
)GetFileAttributesW
, 0 },
702 { "GetFileAttributesW", (SYSCALL
)0, 0 },
705 #define osGetFileAttributesW ((DWORD(WINAPI*)(LPCWSTR))aSyscall[21].pCurrent)
707 #if defined(SQLITE_WIN32_HAS_WIDE)
708 { "GetFileAttributesExW", (SYSCALL
)GetFileAttributesExW
, 0 },
710 { "GetFileAttributesExW", (SYSCALL
)0, 0 },
713 #define osGetFileAttributesExW ((BOOL(WINAPI*)(LPCWSTR,GET_FILEEX_INFO_LEVELS, \
714 LPVOID))aSyscall[22].pCurrent)
717 { "GetFileSize", (SYSCALL
)GetFileSize
, 0 },
719 { "GetFileSize", (SYSCALL
)0, 0 },
722 #define osGetFileSize ((DWORD(WINAPI*)(HANDLE,LPDWORD))aSyscall[23].pCurrent)
724 #if !SQLITE_OS_WINCE && defined(SQLITE_WIN32_HAS_ANSI)
725 { "GetFullPathNameA", (SYSCALL
)GetFullPathNameA
, 0 },
727 { "GetFullPathNameA", (SYSCALL
)0, 0 },
730 #define osGetFullPathNameA ((DWORD(WINAPI*)(LPCSTR,DWORD,LPSTR, \
731 LPSTR*))aSyscall[24].pCurrent)
733 #if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE)
734 { "GetFullPathNameW", (SYSCALL
)GetFullPathNameW
, 0 },
736 { "GetFullPathNameW", (SYSCALL
)0, 0 },
739 #define osGetFullPathNameW ((DWORD(WINAPI*)(LPCWSTR,DWORD,LPWSTR, \
740 LPWSTR*))aSyscall[25].pCurrent)
742 { "GetLastError", (SYSCALL
)GetLastError
, 0 },
744 #define osGetLastError ((DWORD(WINAPI*)(VOID))aSyscall[26].pCurrent)
746 #if !defined(SQLITE_OMIT_LOAD_EXTENSION)
748 /* The GetProcAddressA() routine is only available on Windows CE. */
749 { "GetProcAddressA", (SYSCALL
)GetProcAddressA
, 0 },
751 /* All other Windows platforms expect GetProcAddress() to take
752 ** an ANSI string regardless of the _UNICODE setting */
753 { "GetProcAddressA", (SYSCALL
)GetProcAddress
, 0 },
756 { "GetProcAddressA", (SYSCALL
)0, 0 },
759 #define osGetProcAddressA ((FARPROC(WINAPI*)(HMODULE, \
760 LPCSTR))aSyscall[27].pCurrent)
763 { "GetSystemInfo", (SYSCALL
)GetSystemInfo
, 0 },
765 { "GetSystemInfo", (SYSCALL
)0, 0 },
768 #define osGetSystemInfo ((VOID(WINAPI*)(LPSYSTEM_INFO))aSyscall[28].pCurrent)
770 { "GetSystemTime", (SYSCALL
)GetSystemTime
, 0 },
772 #define osGetSystemTime ((VOID(WINAPI*)(LPSYSTEMTIME))aSyscall[29].pCurrent)
775 { "GetSystemTimeAsFileTime", (SYSCALL
)GetSystemTimeAsFileTime
, 0 },
777 { "GetSystemTimeAsFileTime", (SYSCALL
)0, 0 },
780 #define osGetSystemTimeAsFileTime ((VOID(WINAPI*)( \
781 LPFILETIME))aSyscall[30].pCurrent)
783 #if defined(SQLITE_WIN32_HAS_ANSI)
784 { "GetTempPathA", (SYSCALL
)GetTempPathA
, 0 },
786 { "GetTempPathA", (SYSCALL
)0, 0 },
789 #define osGetTempPathA ((DWORD(WINAPI*)(DWORD,LPSTR))aSyscall[31].pCurrent)
791 #if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE)
792 { "GetTempPathW", (SYSCALL
)GetTempPathW
, 0 },
794 { "GetTempPathW", (SYSCALL
)0, 0 },
797 #define osGetTempPathW ((DWORD(WINAPI*)(DWORD,LPWSTR))aSyscall[32].pCurrent)
800 { "GetTickCount", (SYSCALL
)GetTickCount
, 0 },
802 { "GetTickCount", (SYSCALL
)0, 0 },
805 #define osGetTickCount ((DWORD(WINAPI*)(VOID))aSyscall[33].pCurrent)
807 #if defined(SQLITE_WIN32_HAS_ANSI) && SQLITE_WIN32_GETVERSIONEX
808 { "GetVersionExA", (SYSCALL
)GetVersionExA
, 0 },
810 { "GetVersionExA", (SYSCALL
)0, 0 },
813 #define osGetVersionExA ((BOOL(WINAPI*)( \
814 LPOSVERSIONINFOA))aSyscall[34].pCurrent)
816 #if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE) && \
817 SQLITE_WIN32_GETVERSIONEX
818 { "GetVersionExW", (SYSCALL
)GetVersionExW
, 0 },
820 { "GetVersionExW", (SYSCALL
)0, 0 },
823 #define osGetVersionExW ((BOOL(WINAPI*)( \
824 LPOSVERSIONINFOW))aSyscall[35].pCurrent)
826 { "HeapAlloc", (SYSCALL
)HeapAlloc
, 0 },
828 #define osHeapAlloc ((LPVOID(WINAPI*)(HANDLE,DWORD, \
829 SIZE_T))aSyscall[36].pCurrent)
832 { "HeapCreate", (SYSCALL
)HeapCreate
, 0 },
834 { "HeapCreate", (SYSCALL
)0, 0 },
837 #define osHeapCreate ((HANDLE(WINAPI*)(DWORD,SIZE_T, \
838 SIZE_T))aSyscall[37].pCurrent)
841 { "HeapDestroy", (SYSCALL
)HeapDestroy
, 0 },
843 { "HeapDestroy", (SYSCALL
)0, 0 },
846 #define osHeapDestroy ((BOOL(WINAPI*)(HANDLE))aSyscall[38].pCurrent)
848 { "HeapFree", (SYSCALL
)HeapFree
, 0 },
850 #define osHeapFree ((BOOL(WINAPI*)(HANDLE,DWORD,LPVOID))aSyscall[39].pCurrent)
852 { "HeapReAlloc", (SYSCALL
)HeapReAlloc
, 0 },
854 #define osHeapReAlloc ((LPVOID(WINAPI*)(HANDLE,DWORD,LPVOID, \
855 SIZE_T))aSyscall[40].pCurrent)
857 { "HeapSize", (SYSCALL
)HeapSize
, 0 },
859 #define osHeapSize ((SIZE_T(WINAPI*)(HANDLE,DWORD, \
860 LPCVOID))aSyscall[41].pCurrent)
863 { "HeapValidate", (SYSCALL
)HeapValidate
, 0 },
865 { "HeapValidate", (SYSCALL
)0, 0 },
868 #define osHeapValidate ((BOOL(WINAPI*)(HANDLE,DWORD, \
869 LPCVOID))aSyscall[42].pCurrent)
871 #if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT
872 { "HeapCompact", (SYSCALL
)HeapCompact
, 0 },
874 { "HeapCompact", (SYSCALL
)0, 0 },
877 #define osHeapCompact ((UINT(WINAPI*)(HANDLE,DWORD))aSyscall[43].pCurrent)
879 #if defined(SQLITE_WIN32_HAS_ANSI) && !defined(SQLITE_OMIT_LOAD_EXTENSION)
880 { "LoadLibraryA", (SYSCALL
)LoadLibraryA
, 0 },
882 { "LoadLibraryA", (SYSCALL
)0, 0 },
885 #define osLoadLibraryA ((HMODULE(WINAPI*)(LPCSTR))aSyscall[44].pCurrent)
887 #if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE) && \
888 !defined(SQLITE_OMIT_LOAD_EXTENSION)
889 { "LoadLibraryW", (SYSCALL
)LoadLibraryW
, 0 },
891 { "LoadLibraryW", (SYSCALL
)0, 0 },
894 #define osLoadLibraryW ((HMODULE(WINAPI*)(LPCWSTR))aSyscall[45].pCurrent)
897 { "LocalFree", (SYSCALL
)LocalFree
, 0 },
899 { "LocalFree", (SYSCALL
)0, 0 },
902 #define osLocalFree ((HLOCAL(WINAPI*)(HLOCAL))aSyscall[46].pCurrent)
904 #if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT
905 { "LockFile", (SYSCALL
)LockFile
, 0 },
907 { "LockFile", (SYSCALL
)0, 0 },
911 #define osLockFile ((BOOL(WINAPI*)(HANDLE,DWORD,DWORD,DWORD, \
912 DWORD))aSyscall[47].pCurrent)
916 { "LockFileEx", (SYSCALL
)LockFileEx
, 0 },
918 { "LockFileEx", (SYSCALL
)0, 0 },
922 #define osLockFileEx ((BOOL(WINAPI*)(HANDLE,DWORD,DWORD,DWORD,DWORD, \
923 LPOVERLAPPED))aSyscall[48].pCurrent)
926 #if SQLITE_OS_WINCE || (!SQLITE_OS_WINRT && \
927 (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0))
928 { "MapViewOfFile", (SYSCALL
)MapViewOfFile
, 0 },
930 { "MapViewOfFile", (SYSCALL
)0, 0 },
933 #define osMapViewOfFile ((LPVOID(WINAPI*)(HANDLE,DWORD,DWORD,DWORD, \
934 SIZE_T))aSyscall[49].pCurrent)
936 { "MultiByteToWideChar", (SYSCALL
)MultiByteToWideChar
, 0 },
938 #define osMultiByteToWideChar ((int(WINAPI*)(UINT,DWORD,LPCSTR,int,LPWSTR, \
939 int))aSyscall[50].pCurrent)
941 { "QueryPerformanceCounter", (SYSCALL
)QueryPerformanceCounter
, 0 },
943 #define osQueryPerformanceCounter ((BOOL(WINAPI*)( \
944 LARGE_INTEGER*))aSyscall[51].pCurrent)
946 { "ReadFile", (SYSCALL
)ReadFile
, 0 },
948 #define osReadFile ((BOOL(WINAPI*)(HANDLE,LPVOID,DWORD,LPDWORD, \
949 LPOVERLAPPED))aSyscall[52].pCurrent)
951 { "SetEndOfFile", (SYSCALL
)SetEndOfFile
, 0 },
953 #define osSetEndOfFile ((BOOL(WINAPI*)(HANDLE))aSyscall[53].pCurrent)
956 { "SetFilePointer", (SYSCALL
)SetFilePointer
, 0 },
958 { "SetFilePointer", (SYSCALL
)0, 0 },
961 #define osSetFilePointer ((DWORD(WINAPI*)(HANDLE,LONG,PLONG, \
962 DWORD))aSyscall[54].pCurrent)
965 { "Sleep", (SYSCALL
)Sleep
, 0 },
967 { "Sleep", (SYSCALL
)0, 0 },
970 #define osSleep ((VOID(WINAPI*)(DWORD))aSyscall[55].pCurrent)
972 { "SystemTimeToFileTime", (SYSCALL
)SystemTimeToFileTime
, 0 },
974 #define osSystemTimeToFileTime ((BOOL(WINAPI*)(CONST SYSTEMTIME*, \
975 LPFILETIME))aSyscall[56].pCurrent)
977 #if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT
978 { "UnlockFile", (SYSCALL
)UnlockFile
, 0 },
980 { "UnlockFile", (SYSCALL
)0, 0 },
984 #define osUnlockFile ((BOOL(WINAPI*)(HANDLE,DWORD,DWORD,DWORD, \
985 DWORD))aSyscall[57].pCurrent)
989 { "UnlockFileEx", (SYSCALL
)UnlockFileEx
, 0 },
991 { "UnlockFileEx", (SYSCALL
)0, 0 },
994 #define osUnlockFileEx ((BOOL(WINAPI*)(HANDLE,DWORD,DWORD,DWORD, \
995 LPOVERLAPPED))aSyscall[58].pCurrent)
997 #if SQLITE_OS_WINCE || !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
998 { "UnmapViewOfFile", (SYSCALL
)UnmapViewOfFile
, 0 },
1000 { "UnmapViewOfFile", (SYSCALL
)0, 0 },
1003 #define osUnmapViewOfFile ((BOOL(WINAPI*)(LPCVOID))aSyscall[59].pCurrent)
1005 { "WideCharToMultiByte", (SYSCALL
)WideCharToMultiByte
, 0 },
1007 #define osWideCharToMultiByte ((int(WINAPI*)(UINT,DWORD,LPCWSTR,int,LPSTR,int, \
1008 LPCSTR,LPBOOL))aSyscall[60].pCurrent)
1010 { "WriteFile", (SYSCALL
)WriteFile
, 0 },
1012 #define osWriteFile ((BOOL(WINAPI*)(HANDLE,LPCVOID,DWORD,LPDWORD, \
1013 LPOVERLAPPED))aSyscall[61].pCurrent)
1016 { "CreateEventExW", (SYSCALL
)CreateEventExW
, 0 },
1018 { "CreateEventExW", (SYSCALL
)0, 0 },
1021 #define osCreateEventExW ((HANDLE(WINAPI*)(LPSECURITY_ATTRIBUTES,LPCWSTR, \
1022 DWORD,DWORD))aSyscall[62].pCurrent)
1024 #if !SQLITE_OS_WINRT
1025 { "WaitForSingleObject", (SYSCALL
)WaitForSingleObject
, 0 },
1027 { "WaitForSingleObject", (SYSCALL
)0, 0 },
1030 #define osWaitForSingleObject ((DWORD(WINAPI*)(HANDLE, \
1031 DWORD))aSyscall[63].pCurrent)
1033 #if !SQLITE_OS_WINCE
1034 { "WaitForSingleObjectEx", (SYSCALL
)WaitForSingleObjectEx
, 0 },
1036 { "WaitForSingleObjectEx", (SYSCALL
)0, 0 },
1039 #define osWaitForSingleObjectEx ((DWORD(WINAPI*)(HANDLE,DWORD, \
1040 BOOL))aSyscall[64].pCurrent)
1043 { "SetFilePointerEx", (SYSCALL
)SetFilePointerEx
, 0 },
1045 { "SetFilePointerEx", (SYSCALL
)0, 0 },
1048 #define osSetFilePointerEx ((BOOL(WINAPI*)(HANDLE,LARGE_INTEGER, \
1049 PLARGE_INTEGER,DWORD))aSyscall[65].pCurrent)
1052 { "GetFileInformationByHandleEx", (SYSCALL
)GetFileInformationByHandleEx
, 0 },
1054 { "GetFileInformationByHandleEx", (SYSCALL
)0, 0 },
1057 #define osGetFileInformationByHandleEx ((BOOL(WINAPI*)(HANDLE, \
1058 FILE_INFO_BY_HANDLE_CLASS,LPVOID,DWORD))aSyscall[66].pCurrent)
1060 #if SQLITE_OS_WINRT && (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0)
1061 { "MapViewOfFileFromApp", (SYSCALL
)MapViewOfFileFromApp
, 0 },
1063 { "MapViewOfFileFromApp", (SYSCALL
)0, 0 },
1066 #define osMapViewOfFileFromApp ((LPVOID(WINAPI*)(HANDLE,ULONG,ULONG64, \
1067 SIZE_T))aSyscall[67].pCurrent)
1070 { "CreateFile2", (SYSCALL
)CreateFile2
, 0 },
1072 { "CreateFile2", (SYSCALL
)0, 0 },
1075 #define osCreateFile2 ((HANDLE(WINAPI*)(LPCWSTR,DWORD,DWORD,DWORD, \
1076 LPCREATEFILE2_EXTENDED_PARAMETERS))aSyscall[68].pCurrent)
1078 #if SQLITE_OS_WINRT && !defined(SQLITE_OMIT_LOAD_EXTENSION)
1079 { "LoadPackagedLibrary", (SYSCALL
)LoadPackagedLibrary
, 0 },
1081 { "LoadPackagedLibrary", (SYSCALL
)0, 0 },
1084 #define osLoadPackagedLibrary ((HMODULE(WINAPI*)(LPCWSTR, \
1085 DWORD))aSyscall[69].pCurrent)
1088 { "GetTickCount64", (SYSCALL
)GetTickCount64
, 0 },
1090 { "GetTickCount64", (SYSCALL
)0, 0 },
1093 #define osGetTickCount64 ((ULONGLONG(WINAPI*)(VOID))aSyscall[70].pCurrent)
1096 { "GetNativeSystemInfo", (SYSCALL
)GetNativeSystemInfo
, 0 },
1098 { "GetNativeSystemInfo", (SYSCALL
)0, 0 },
1101 #define osGetNativeSystemInfo ((VOID(WINAPI*)( \
1102 LPSYSTEM_INFO))aSyscall[71].pCurrent)
1104 #if defined(SQLITE_WIN32_HAS_ANSI)
1105 { "OutputDebugStringA", (SYSCALL
)OutputDebugStringA
, 0 },
1107 { "OutputDebugStringA", (SYSCALL
)0, 0 },
1110 #define osOutputDebugStringA ((VOID(WINAPI*)(LPCSTR))aSyscall[72].pCurrent)
1112 #if defined(SQLITE_WIN32_HAS_WIDE)
1113 { "OutputDebugStringW", (SYSCALL
)OutputDebugStringW
, 0 },
1115 { "OutputDebugStringW", (SYSCALL
)0, 0 },
1118 #define osOutputDebugStringW ((VOID(WINAPI*)(LPCWSTR))aSyscall[73].pCurrent)
1120 { "GetProcessHeap", (SYSCALL
)GetProcessHeap
, 0 },
1122 #define osGetProcessHeap ((HANDLE(WINAPI*)(VOID))aSyscall[74].pCurrent)
1124 #if SQLITE_OS_WINRT && (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0)
1125 { "CreateFileMappingFromApp", (SYSCALL
)CreateFileMappingFromApp
, 0 },
1127 { "CreateFileMappingFromApp", (SYSCALL
)0, 0 },
1130 #define osCreateFileMappingFromApp ((HANDLE(WINAPI*)(HANDLE, \
1131 LPSECURITY_ATTRIBUTES,ULONG,ULONG64,LPCWSTR))aSyscall[75].pCurrent)
1134 ** NOTE: On some sub-platforms, the InterlockedCompareExchange "function"
1135 ** is really just a macro that uses a compiler intrinsic (e.g. x64).
1136 ** So do not try to make this is into a redefinable interface.
1138 #if defined(InterlockedCompareExchange)
1139 { "InterlockedCompareExchange", (SYSCALL
)0, 0 },
1141 #define osInterlockedCompareExchange InterlockedCompareExchange
1143 { "InterlockedCompareExchange", (SYSCALL
)InterlockedCompareExchange
, 0 },
1145 #define osInterlockedCompareExchange ((LONG(WINAPI*)(LONG \
1146 SQLITE_WIN32_VOLATILE*, LONG,LONG))aSyscall[76].pCurrent)
1147 #endif /* defined(InterlockedCompareExchange) */
1149 #if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && SQLITE_WIN32_USE_UUID
1150 { "UuidCreate", (SYSCALL
)UuidCreate
, 0 },
1152 { "UuidCreate", (SYSCALL
)0, 0 },
1155 #define osUuidCreate ((RPC_STATUS(RPC_ENTRY*)(UUID*))aSyscall[77].pCurrent)
1157 #if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && SQLITE_WIN32_USE_UUID
1158 { "UuidCreateSequential", (SYSCALL
)UuidCreateSequential
, 0 },
1160 { "UuidCreateSequential", (SYSCALL
)0, 0 },
1163 #define osUuidCreateSequential \
1164 ((RPC_STATUS(RPC_ENTRY*)(UUID*))aSyscall[78].pCurrent)
1166 #if !defined(SQLITE_NO_SYNC) && SQLITE_MAX_MMAP_SIZE>0
1167 { "FlushViewOfFile", (SYSCALL
)FlushViewOfFile
, 0 },
1169 { "FlushViewOfFile", (SYSCALL
)0, 0 },
1172 #define osFlushViewOfFile \
1173 ((BOOL(WINAPI*)(LPCVOID,SIZE_T))aSyscall[79].pCurrent)
1175 }; /* End of the overrideable system calls */
1178 ** This is the xSetSystemCall() method of sqlite3_vfs for all of the
1179 ** "win32" VFSes. Return SQLITE_OK opon successfully updating the
1180 ** system call pointer, or SQLITE_NOTFOUND if there is no configurable
1181 ** system call named zName.
1183 static int winSetSystemCall(
1184 sqlite3_vfs
*pNotUsed
, /* The VFS pointer. Not used */
1185 const char *zName
, /* Name of system call to override */
1186 sqlite3_syscall_ptr pNewFunc
/* Pointer to new system call value */
1189 int rc
= SQLITE_NOTFOUND
;
1191 UNUSED_PARAMETER(pNotUsed
);
1193 /* If no zName is given, restore all system calls to their default
1194 ** settings and return NULL
1197 for(i
=0; i
<sizeof(aSyscall
)/sizeof(aSyscall
[0]); i
++){
1198 if( aSyscall
[i
].pDefault
){
1199 aSyscall
[i
].pCurrent
= aSyscall
[i
].pDefault
;
1203 /* If zName is specified, operate on only the one system call
1206 for(i
=0; i
<sizeof(aSyscall
)/sizeof(aSyscall
[0]); i
++){
1207 if( strcmp(zName
, aSyscall
[i
].zName
)==0 ){
1208 if( aSyscall
[i
].pDefault
==0 ){
1209 aSyscall
[i
].pDefault
= aSyscall
[i
].pCurrent
;
1212 if( pNewFunc
==0 ) pNewFunc
= aSyscall
[i
].pDefault
;
1213 aSyscall
[i
].pCurrent
= pNewFunc
;
1222 ** Return the value of a system call. Return NULL if zName is not a
1223 ** recognized system call name. NULL is also returned if the system call
1224 ** is currently undefined.
1226 static sqlite3_syscall_ptr
winGetSystemCall(
1227 sqlite3_vfs
*pNotUsed
,
1232 UNUSED_PARAMETER(pNotUsed
);
1233 for(i
=0; i
<sizeof(aSyscall
)/sizeof(aSyscall
[0]); i
++){
1234 if( strcmp(zName
, aSyscall
[i
].zName
)==0 ) return aSyscall
[i
].pCurrent
;
1240 ** Return the name of the first system call after zName. If zName==NULL
1241 ** then return the name of the first system call. Return NULL if zName
1242 ** is the last system call or if zName is not the name of a valid
1245 static const char *winNextSystemCall(sqlite3_vfs
*p
, const char *zName
){
1248 UNUSED_PARAMETER(p
);
1250 for(i
=0; i
<ArraySize(aSyscall
)-1; i
++){
1251 if( strcmp(zName
, aSyscall
[i
].zName
)==0 ) break;
1254 for(i
++; i
<ArraySize(aSyscall
); i
++){
1255 if( aSyscall
[i
].pCurrent
!=0 ) return aSyscall
[i
].zName
;
1260 #ifdef SQLITE_WIN32_MALLOC
1262 ** If a Win32 native heap has been configured, this function will attempt to
1263 ** compact it. Upon success, SQLITE_OK will be returned. Upon failure, one
1264 ** of SQLITE_NOMEM, SQLITE_ERROR, or SQLITE_NOTFOUND will be returned. The
1265 ** "pnLargest" argument, if non-zero, will be used to return the size of the
1266 ** largest committed free block in the heap, in bytes.
1268 int sqlite3_win32_compact_heap(LPUINT pnLargest
){
1273 winMemAssertMagic();
1274 hHeap
= winMemGetHeap();
1276 assert( hHeap
!=INVALID_HANDLE_VALUE
);
1277 #if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_MALLOC_VALIDATE)
1278 assert( osHeapValidate(hHeap
, SQLITE_WIN32_HEAP_FLAGS
, NULL
) );
1280 #if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT
1281 if( (nLargest
=osHeapCompact(hHeap
, SQLITE_WIN32_HEAP_FLAGS
))==0 ){
1282 DWORD lastErrno
= osGetLastError();
1283 if( lastErrno
==NO_ERROR
){
1284 sqlite3_log(SQLITE_NOMEM
, "failed to HeapCompact (no space), heap=%p",
1286 rc
= SQLITE_NOMEM_BKPT
;
1288 sqlite3_log(SQLITE_ERROR
, "failed to HeapCompact (%lu), heap=%p",
1289 osGetLastError(), (void*)hHeap
);
1294 sqlite3_log(SQLITE_NOTFOUND
, "failed to HeapCompact, heap=%p",
1296 rc
= SQLITE_NOTFOUND
;
1298 if( pnLargest
) *pnLargest
= nLargest
;
1303 ** If a Win32 native heap has been configured, this function will attempt to
1304 ** destroy and recreate it. If the Win32 native heap is not isolated and/or
1305 ** the sqlite3_memory_used() function does not return zero, SQLITE_BUSY will
1306 ** be returned and no changes will be made to the Win32 native heap.
1308 int sqlite3_win32_reset_heap(){
1310 MUTEX_LOGIC( sqlite3_mutex
*pMaster
; ) /* The main static mutex */
1311 MUTEX_LOGIC( sqlite3_mutex
*pMem
; ) /* The memsys static mutex */
1312 MUTEX_LOGIC( pMaster
= sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER
); )
1313 MUTEX_LOGIC( pMem
= sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MEM
); )
1314 sqlite3_mutex_enter(pMaster
);
1315 sqlite3_mutex_enter(pMem
);
1316 winMemAssertMagic();
1317 if( winMemGetHeap()!=NULL
&& winMemGetOwned() && sqlite3_memory_used()==0 ){
1319 ** At this point, there should be no outstanding memory allocations on
1320 ** the heap. Also, since both the master and memsys locks are currently
1321 ** being held by us, no other function (i.e. from another thread) should
1322 ** be able to even access the heap. Attempt to destroy and recreate our
1323 ** isolated Win32 native heap now.
1325 assert( winMemGetHeap()!=NULL
);
1326 assert( winMemGetOwned() );
1327 assert( sqlite3_memory_used()==0 );
1328 winMemShutdown(winMemGetDataPtr());
1329 assert( winMemGetHeap()==NULL
);
1330 assert( !winMemGetOwned() );
1331 assert( sqlite3_memory_used()==0 );
1332 rc
= winMemInit(winMemGetDataPtr());
1333 assert( rc
!=SQLITE_OK
|| winMemGetHeap()!=NULL
);
1334 assert( rc
!=SQLITE_OK
|| winMemGetOwned() );
1335 assert( rc
!=SQLITE_OK
|| sqlite3_memory_used()==0 );
1338 ** The Win32 native heap cannot be modified because it may be in use.
1342 sqlite3_mutex_leave(pMem
);
1343 sqlite3_mutex_leave(pMaster
);
1346 #endif /* SQLITE_WIN32_MALLOC */
1349 ** This function outputs the specified (ANSI) string to the Win32 debugger
1353 void sqlite3_win32_write_debug(const char *zBuf
, int nBuf
){
1354 char zDbgBuf
[SQLITE_WIN32_DBG_BUF_SIZE
];
1355 int nMin
= MIN(nBuf
, (SQLITE_WIN32_DBG_BUF_SIZE
- 1)); /* may be negative. */
1356 if( nMin
<-1 ) nMin
= -1; /* all negative values become -1. */
1357 assert( nMin
==-1 || nMin
==0 || nMin
<SQLITE_WIN32_DBG_BUF_SIZE
);
1358 #ifdef SQLITE_ENABLE_API_ARMOR
1360 (void)SQLITE_MISUSE_BKPT
;
1364 #if defined(SQLITE_WIN32_HAS_ANSI)
1366 memset(zDbgBuf
, 0, SQLITE_WIN32_DBG_BUF_SIZE
);
1367 memcpy(zDbgBuf
, zBuf
, nMin
);
1368 osOutputDebugStringA(zDbgBuf
);
1370 osOutputDebugStringA(zBuf
);
1372 #elif defined(SQLITE_WIN32_HAS_WIDE)
1373 memset(zDbgBuf
, 0, SQLITE_WIN32_DBG_BUF_SIZE
);
1374 if ( osMultiByteToWideChar(
1375 osAreFileApisANSI() ? CP_ACP
: CP_OEMCP
, 0, zBuf
,
1376 nMin
, (LPWSTR
)zDbgBuf
, SQLITE_WIN32_DBG_BUF_SIZE
/sizeof(WCHAR
))<=0 ){
1379 osOutputDebugStringW((LPCWSTR
)zDbgBuf
);
1382 memset(zDbgBuf
, 0, SQLITE_WIN32_DBG_BUF_SIZE
);
1383 memcpy(zDbgBuf
, zBuf
, nMin
);
1384 fprintf(stderr
, "%s", zDbgBuf
);
1386 fprintf(stderr
, "%s", zBuf
);
1392 ** The following routine suspends the current thread for at least ms
1393 ** milliseconds. This is equivalent to the Win32 Sleep() interface.
1396 static HANDLE sleepObj
= NULL
;
1399 void sqlite3_win32_sleep(DWORD milliseconds
){
1401 if ( sleepObj
==NULL
){
1402 sleepObj
= osCreateEventExW(NULL
, NULL
, CREATE_EVENT_MANUAL_RESET
,
1405 assert( sleepObj
!=NULL
);
1406 osWaitForSingleObjectEx(sleepObj
, milliseconds
, FALSE
);
1408 osSleep(milliseconds
);
1412 #if SQLITE_MAX_WORKER_THREADS>0 && !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && \
1414 DWORD
sqlite3Win32Wait(HANDLE hObject
){
1416 while( (rc
= osWaitForSingleObjectEx(hObject
, INFINITE
,
1417 TRUE
))==WAIT_IO_COMPLETION
){}
1423 ** Return true (non-zero) if we are running under WinNT, Win2K, WinXP,
1424 ** or WinCE. Return false (zero) for Win95, Win98, or WinME.
1426 ** Here is an interesting observation: Win95, Win98, and WinME lack
1427 ** the LockFileEx() API. But we can still statically link against that
1428 ** API as long as we don't call it when running Win95/98/ME. A call to
1429 ** this routine is used to determine if the host is Win95/98/ME or
1430 ** WinNT/2K/XP so that we will know whether or not we can safely call
1431 ** the LockFileEx() API.
1434 #if !SQLITE_WIN32_GETVERSIONEX
1435 # define osIsNT() (1)
1436 #elif SQLITE_OS_WINCE || SQLITE_OS_WINRT || !defined(SQLITE_WIN32_HAS_ANSI)
1437 # define osIsNT() (1)
1438 #elif !defined(SQLITE_WIN32_HAS_WIDE)
1439 # define osIsNT() (0)
1441 # define osIsNT() ((sqlite3_os_type==2) || sqlite3_win32_is_nt())
1445 ** This function determines if the machine is running a version of Windows
1446 ** based on the NT kernel.
1448 int sqlite3_win32_is_nt(void){
1451 ** NOTE: The WinRT sub-platform is always assumed to be based on the NT
1455 #elif SQLITE_WIN32_GETVERSIONEX
1456 if( osInterlockedCompareExchange(&sqlite3_os_type
, 0, 0)==0 ){
1457 #if defined(SQLITE_WIN32_HAS_ANSI)
1458 OSVERSIONINFOA sInfo
;
1459 sInfo
.dwOSVersionInfoSize
= sizeof(sInfo
);
1460 osGetVersionExA(&sInfo
);
1461 osInterlockedCompareExchange(&sqlite3_os_type
,
1462 (sInfo
.dwPlatformId
== VER_PLATFORM_WIN32_NT
) ? 2 : 1, 0);
1463 #elif defined(SQLITE_WIN32_HAS_WIDE)
1464 OSVERSIONINFOW sInfo
;
1465 sInfo
.dwOSVersionInfoSize
= sizeof(sInfo
);
1466 osGetVersionExW(&sInfo
);
1467 osInterlockedCompareExchange(&sqlite3_os_type
,
1468 (sInfo
.dwPlatformId
== VER_PLATFORM_WIN32_NT
) ? 2 : 1, 0);
1471 return osInterlockedCompareExchange(&sqlite3_os_type
, 2, 2)==2;
1473 return osInterlockedCompareExchange(&sqlite3_os_type
, 2, 2)==2;
1476 ** NOTE: All sub-platforms where the GetVersionEx[AW] functions are
1477 ** deprecated are always assumed to be based on the NT kernel.
1483 #ifdef SQLITE_WIN32_MALLOC
1485 ** Allocate nBytes of memory.
1487 static void *winMemMalloc(int nBytes
){
1491 winMemAssertMagic();
1492 hHeap
= winMemGetHeap();
1494 assert( hHeap
!=INVALID_HANDLE_VALUE
);
1495 #if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_MALLOC_VALIDATE)
1496 assert( osHeapValidate(hHeap
, SQLITE_WIN32_HEAP_FLAGS
, NULL
) );
1498 assert( nBytes
>=0 );
1499 p
= osHeapAlloc(hHeap
, SQLITE_WIN32_HEAP_FLAGS
, (SIZE_T
)nBytes
);
1501 sqlite3_log(SQLITE_NOMEM
, "failed to HeapAlloc %u bytes (%lu), heap=%p",
1502 nBytes
, osGetLastError(), (void*)hHeap
);
1510 static void winMemFree(void *pPrior
){
1513 winMemAssertMagic();
1514 hHeap
= winMemGetHeap();
1516 assert( hHeap
!=INVALID_HANDLE_VALUE
);
1517 #if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_MALLOC_VALIDATE)
1518 assert( osHeapValidate(hHeap
, SQLITE_WIN32_HEAP_FLAGS
, pPrior
) );
1520 if( !pPrior
) return; /* Passing NULL to HeapFree is undefined. */
1521 if( !osHeapFree(hHeap
, SQLITE_WIN32_HEAP_FLAGS
, pPrior
) ){
1522 sqlite3_log(SQLITE_NOMEM
, "failed to HeapFree block %p (%lu), heap=%p",
1523 pPrior
, osGetLastError(), (void*)hHeap
);
1528 ** Change the size of an existing memory allocation
1530 static void *winMemRealloc(void *pPrior
, int nBytes
){
1534 winMemAssertMagic();
1535 hHeap
= winMemGetHeap();
1537 assert( hHeap
!=INVALID_HANDLE_VALUE
);
1538 #if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_MALLOC_VALIDATE)
1539 assert( osHeapValidate(hHeap
, SQLITE_WIN32_HEAP_FLAGS
, pPrior
) );
1541 assert( nBytes
>=0 );
1543 p
= osHeapAlloc(hHeap
, SQLITE_WIN32_HEAP_FLAGS
, (SIZE_T
)nBytes
);
1545 p
= osHeapReAlloc(hHeap
, SQLITE_WIN32_HEAP_FLAGS
, pPrior
, (SIZE_T
)nBytes
);
1548 sqlite3_log(SQLITE_NOMEM
, "failed to %s %u bytes (%lu), heap=%p",
1549 pPrior
? "HeapReAlloc" : "HeapAlloc", nBytes
, osGetLastError(),
1556 ** Return the size of an outstanding allocation, in bytes.
1558 static int winMemSize(void *p
){
1562 winMemAssertMagic();
1563 hHeap
= winMemGetHeap();
1565 assert( hHeap
!=INVALID_HANDLE_VALUE
);
1566 #if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_MALLOC_VALIDATE)
1567 assert( osHeapValidate(hHeap
, SQLITE_WIN32_HEAP_FLAGS
, p
) );
1570 n
= osHeapSize(hHeap
, SQLITE_WIN32_HEAP_FLAGS
, p
);
1571 if( n
==(SIZE_T
)-1 ){
1572 sqlite3_log(SQLITE_NOMEM
, "failed to HeapSize block %p (%lu), heap=%p",
1573 p
, osGetLastError(), (void*)hHeap
);
1580 ** Round up a request size to the next valid allocation size.
1582 static int winMemRoundup(int n
){
1587 ** Initialize this module.
1589 static int winMemInit(void *pAppData
){
1590 winMemData
*pWinMemData
= (winMemData
*)pAppData
;
1592 if( !pWinMemData
) return SQLITE_ERROR
;
1593 assert( pWinMemData
->magic1
==WINMEM_MAGIC1
);
1594 assert( pWinMemData
->magic2
==WINMEM_MAGIC2
);
1596 #if !SQLITE_OS_WINRT && SQLITE_WIN32_HEAP_CREATE
1597 if( !pWinMemData
->hHeap
){
1598 DWORD dwInitialSize
= SQLITE_WIN32_HEAP_INIT_SIZE
;
1599 DWORD dwMaximumSize
= (DWORD
)sqlite3GlobalConfig
.nHeap
;
1600 if( dwMaximumSize
==0 ){
1601 dwMaximumSize
= SQLITE_WIN32_HEAP_MAX_SIZE
;
1602 }else if( dwInitialSize
>dwMaximumSize
){
1603 dwInitialSize
= dwMaximumSize
;
1605 pWinMemData
->hHeap
= osHeapCreate(SQLITE_WIN32_HEAP_FLAGS
,
1606 dwInitialSize
, dwMaximumSize
);
1607 if( !pWinMemData
->hHeap
){
1608 sqlite3_log(SQLITE_NOMEM
,
1609 "failed to HeapCreate (%lu), flags=%u, initSize=%lu, maxSize=%lu",
1610 osGetLastError(), SQLITE_WIN32_HEAP_FLAGS
, dwInitialSize
,
1612 return SQLITE_NOMEM_BKPT
;
1614 pWinMemData
->bOwned
= TRUE
;
1615 assert( pWinMemData
->bOwned
);
1618 pWinMemData
->hHeap
= osGetProcessHeap();
1619 if( !pWinMemData
->hHeap
){
1620 sqlite3_log(SQLITE_NOMEM
,
1621 "failed to GetProcessHeap (%lu)", osGetLastError());
1622 return SQLITE_NOMEM_BKPT
;
1624 pWinMemData
->bOwned
= FALSE
;
1625 assert( !pWinMemData
->bOwned
);
1627 assert( pWinMemData
->hHeap
!=0 );
1628 assert( pWinMemData
->hHeap
!=INVALID_HANDLE_VALUE
);
1629 #if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_MALLOC_VALIDATE)
1630 assert( osHeapValidate(pWinMemData
->hHeap
, SQLITE_WIN32_HEAP_FLAGS
, NULL
) );
1636 ** Deinitialize this module.
1638 static void winMemShutdown(void *pAppData
){
1639 winMemData
*pWinMemData
= (winMemData
*)pAppData
;
1641 if( !pWinMemData
) return;
1642 assert( pWinMemData
->magic1
==WINMEM_MAGIC1
);
1643 assert( pWinMemData
->magic2
==WINMEM_MAGIC2
);
1645 if( pWinMemData
->hHeap
){
1646 assert( pWinMemData
->hHeap
!=INVALID_HANDLE_VALUE
);
1647 #if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_MALLOC_VALIDATE)
1648 assert( osHeapValidate(pWinMemData
->hHeap
, SQLITE_WIN32_HEAP_FLAGS
, NULL
) );
1650 if( pWinMemData
->bOwned
){
1651 if( !osHeapDestroy(pWinMemData
->hHeap
) ){
1652 sqlite3_log(SQLITE_NOMEM
, "failed to HeapDestroy (%lu), heap=%p",
1653 osGetLastError(), (void*)pWinMemData
->hHeap
);
1655 pWinMemData
->bOwned
= FALSE
;
1657 pWinMemData
->hHeap
= NULL
;
1662 ** Populate the low-level memory allocation function pointers in
1663 ** sqlite3GlobalConfig.m with pointers to the routines in this file. The
1664 ** arguments specify the block of memory to manage.
1666 ** This routine is only called by sqlite3_config(), and therefore
1667 ** is not required to be threadsafe (it is not).
1669 const sqlite3_mem_methods
*sqlite3MemGetWin32(void){
1670 static const sqlite3_mem_methods winMemMethods
= {
1680 return &winMemMethods
;
1683 void sqlite3MemSetDefault(void){
1684 sqlite3_config(SQLITE_CONFIG_MALLOC
, sqlite3MemGetWin32());
1686 #endif /* SQLITE_WIN32_MALLOC */
1689 ** Convert a UTF-8 string to Microsoft Unicode.
1691 ** Space to hold the returned string is obtained from sqlite3_malloc().
1693 static LPWSTR
winUtf8ToUnicode(const char *zText
){
1697 nChar
= osMultiByteToWideChar(CP_UTF8
, 0, zText
, -1, NULL
, 0);
1701 zWideText
= sqlite3MallocZero( nChar
*sizeof(WCHAR
) );
1705 nChar
= osMultiByteToWideChar(CP_UTF8
, 0, zText
, -1, zWideText
,
1708 sqlite3_free(zWideText
);
1715 ** Convert a Microsoft Unicode string to UTF-8.
1717 ** Space to hold the returned string is obtained from sqlite3_malloc().
1719 static char *winUnicodeToUtf8(LPCWSTR zWideText
){
1723 nByte
= osWideCharToMultiByte(CP_UTF8
, 0, zWideText
, -1, 0, 0, 0, 0);
1727 zText
= sqlite3MallocZero( nByte
);
1731 nByte
= osWideCharToMultiByte(CP_UTF8
, 0, zWideText
, -1, zText
, nByte
,
1734 sqlite3_free(zText
);
1741 ** Convert an ANSI string to Microsoft Unicode, using the ANSI or OEM
1744 ** Space to hold the returned string is obtained from sqlite3_malloc().
1746 static LPWSTR
winMbcsToUnicode(const char *zText
, int useAnsi
){
1749 int codepage
= useAnsi
? CP_ACP
: CP_OEMCP
;
1751 nByte
= osMultiByteToWideChar(codepage
, 0, zText
, -1, NULL
,
1756 zMbcsText
= sqlite3MallocZero( nByte
*sizeof(WCHAR
) );
1760 nByte
= osMultiByteToWideChar(codepage
, 0, zText
, -1, zMbcsText
,
1763 sqlite3_free(zMbcsText
);
1770 ** Convert a Microsoft Unicode string to a multi-byte character string,
1771 ** using the ANSI or OEM code page.
1773 ** Space to hold the returned string is obtained from sqlite3_malloc().
1775 static char *winUnicodeToMbcs(LPCWSTR zWideText
, int useAnsi
){
1778 int codepage
= useAnsi
? CP_ACP
: CP_OEMCP
;
1780 nByte
= osWideCharToMultiByte(codepage
, 0, zWideText
, -1, 0, 0, 0, 0);
1784 zText
= sqlite3MallocZero( nByte
);
1788 nByte
= osWideCharToMultiByte(codepage
, 0, zWideText
, -1, zText
,
1791 sqlite3_free(zText
);
1798 ** Convert a multi-byte character string to UTF-8.
1800 ** Space to hold the returned string is obtained from sqlite3_malloc().
1802 static char *winMbcsToUtf8(const char *zText
, int useAnsi
){
1806 zTmpWide
= winMbcsToUnicode(zText
, useAnsi
);
1810 zTextUtf8
= winUnicodeToUtf8(zTmpWide
);
1811 sqlite3_free(zTmpWide
);
1816 ** Convert a UTF-8 string to a multi-byte character string.
1818 ** Space to hold the returned string is obtained from sqlite3_malloc().
1820 static char *winUtf8ToMbcs(const char *zText
, int useAnsi
){
1824 zTmpWide
= winUtf8ToUnicode(zText
);
1828 zTextMbcs
= winUnicodeToMbcs(zTmpWide
, useAnsi
);
1829 sqlite3_free(zTmpWide
);
1834 ** This is a public wrapper for the winUtf8ToUnicode() function.
1836 LPWSTR
sqlite3_win32_utf8_to_unicode(const char *zText
){
1837 #ifdef SQLITE_ENABLE_API_ARMOR
1839 (void)SQLITE_MISUSE_BKPT
;
1843 #ifndef SQLITE_OMIT_AUTOINIT
1844 if( sqlite3_initialize() ) return 0;
1846 return winUtf8ToUnicode(zText
);
1850 ** This is a public wrapper for the winUnicodeToUtf8() function.
1852 char *sqlite3_win32_unicode_to_utf8(LPCWSTR zWideText
){
1853 #ifdef SQLITE_ENABLE_API_ARMOR
1855 (void)SQLITE_MISUSE_BKPT
;
1859 #ifndef SQLITE_OMIT_AUTOINIT
1860 if( sqlite3_initialize() ) return 0;
1862 return winUnicodeToUtf8(zWideText
);
1866 ** This is a public wrapper for the winMbcsToUtf8() function.
1868 char *sqlite3_win32_mbcs_to_utf8(const char *zText
){
1869 #ifdef SQLITE_ENABLE_API_ARMOR
1871 (void)SQLITE_MISUSE_BKPT
;
1875 #ifndef SQLITE_OMIT_AUTOINIT
1876 if( sqlite3_initialize() ) return 0;
1878 return winMbcsToUtf8(zText
, osAreFileApisANSI());
1882 ** This is a public wrapper for the winMbcsToUtf8() function.
1884 char *sqlite3_win32_mbcs_to_utf8_v2(const char *zText
, int useAnsi
){
1885 #ifdef SQLITE_ENABLE_API_ARMOR
1887 (void)SQLITE_MISUSE_BKPT
;
1891 #ifndef SQLITE_OMIT_AUTOINIT
1892 if( sqlite3_initialize() ) return 0;
1894 return winMbcsToUtf8(zText
, useAnsi
);
1898 ** This is a public wrapper for the winUtf8ToMbcs() function.
1900 char *sqlite3_win32_utf8_to_mbcs(const char *zText
){
1901 #ifdef SQLITE_ENABLE_API_ARMOR
1903 (void)SQLITE_MISUSE_BKPT
;
1907 #ifndef SQLITE_OMIT_AUTOINIT
1908 if( sqlite3_initialize() ) return 0;
1910 return winUtf8ToMbcs(zText
, osAreFileApisANSI());
1914 ** This is a public wrapper for the winUtf8ToMbcs() function.
1916 char *sqlite3_win32_utf8_to_mbcs_v2(const char *zText
, int useAnsi
){
1917 #ifdef SQLITE_ENABLE_API_ARMOR
1919 (void)SQLITE_MISUSE_BKPT
;
1923 #ifndef SQLITE_OMIT_AUTOINIT
1924 if( sqlite3_initialize() ) return 0;
1926 return winUtf8ToMbcs(zText
, useAnsi
);
1930 ** This function sets the data directory or the temporary directory based on
1931 ** the provided arguments. The type argument must be 1 in order to set the
1932 ** data directory or 2 in order to set the temporary directory. The zValue
1933 ** argument is the name of the directory to use. The return value will be
1934 ** SQLITE_OK if successful.
1936 int sqlite3_win32_set_directory(DWORD type
, LPCWSTR zValue
){
1937 char **ppDirectory
= 0;
1938 #ifndef SQLITE_OMIT_AUTOINIT
1939 int rc
= sqlite3_initialize();
1942 if( type
==SQLITE_WIN32_DATA_DIRECTORY_TYPE
){
1943 ppDirectory
= &sqlite3_data_directory
;
1944 }else if( type
==SQLITE_WIN32_TEMP_DIRECTORY_TYPE
){
1945 ppDirectory
= &sqlite3_temp_directory
;
1947 assert( !ppDirectory
|| type
==SQLITE_WIN32_DATA_DIRECTORY_TYPE
1948 || type
==SQLITE_WIN32_TEMP_DIRECTORY_TYPE
1950 assert( !ppDirectory
|| sqlite3MemdebugHasType(*ppDirectory
, MEMTYPE_HEAP
) );
1952 char *zValueUtf8
= 0;
1953 if( zValue
&& zValue
[0] ){
1954 zValueUtf8
= winUnicodeToUtf8(zValue
);
1955 if ( zValueUtf8
==0 ){
1956 return SQLITE_NOMEM_BKPT
;
1959 sqlite3_free(*ppDirectory
);
1960 *ppDirectory
= zValueUtf8
;
1963 return SQLITE_ERROR
;
1967 ** The return value of winGetLastErrorMsg
1968 ** is zero if the error message fits in the buffer, or non-zero
1969 ** otherwise (if the message was truncated).
1971 static int winGetLastErrorMsg(DWORD lastErrno
, int nBuf
, char *zBuf
){
1972 /* FormatMessage returns 0 on failure. Otherwise it
1973 ** returns the number of TCHARs written to the output
1974 ** buffer, excluding the terminating null char.
1981 WCHAR zTempWide
[SQLITE_WIN32_MAX_ERRMSG_CHARS
+1];
1982 dwLen
= osFormatMessageW(FORMAT_MESSAGE_FROM_SYSTEM
|
1983 FORMAT_MESSAGE_IGNORE_INSERTS
,
1988 SQLITE_WIN32_MAX_ERRMSG_CHARS
,
1991 LPWSTR zTempWide
= NULL
;
1992 dwLen
= osFormatMessageW(FORMAT_MESSAGE_ALLOCATE_BUFFER
|
1993 FORMAT_MESSAGE_FROM_SYSTEM
|
1994 FORMAT_MESSAGE_IGNORE_INSERTS
,
1998 (LPWSTR
) &zTempWide
,
2003 /* allocate a buffer and convert to UTF8 */
2004 sqlite3BeginBenignMalloc();
2005 zOut
= winUnicodeToUtf8(zTempWide
);
2006 sqlite3EndBenignMalloc();
2007 #if !SQLITE_OS_WINRT
2008 /* free the system buffer allocated by FormatMessage */
2009 osLocalFree(zTempWide
);
2013 #ifdef SQLITE_WIN32_HAS_ANSI
2016 dwLen
= osFormatMessageA(FORMAT_MESSAGE_ALLOCATE_BUFFER
|
2017 FORMAT_MESSAGE_FROM_SYSTEM
|
2018 FORMAT_MESSAGE_IGNORE_INSERTS
,
2026 /* allocate a buffer and convert to UTF8 */
2027 sqlite3BeginBenignMalloc();
2028 zOut
= winMbcsToUtf8(zTemp
, osAreFileApisANSI());
2029 sqlite3EndBenignMalloc();
2030 /* free the system buffer allocated by FormatMessage */
2036 sqlite3_snprintf(nBuf
, zBuf
, "OsError 0x%lx (%lu)", lastErrno
, lastErrno
);
2038 /* copy a maximum of nBuf chars to output buffer */
2039 sqlite3_snprintf(nBuf
, zBuf
, "%s", zOut
);
2040 /* free the UTF8 buffer */
2048 ** This function - winLogErrorAtLine() - is only ever called via the macro
2051 ** This routine is invoked after an error occurs in an OS function.
2052 ** It logs a message using sqlite3_log() containing the current value of
2053 ** error code and, if possible, the human-readable equivalent from
2056 ** The first argument passed to the macro should be the error code that
2057 ** will be returned to SQLite (e.g. SQLITE_IOERR_DELETE, SQLITE_CANTOPEN).
2058 ** The two subsequent arguments should be the name of the OS function that
2059 ** failed and the associated file-system path, if any.
2061 #define winLogError(a,b,c,d) winLogErrorAtLine(a,b,c,d,__LINE__)
2062 static int winLogErrorAtLine(
2063 int errcode
, /* SQLite error code */
2064 DWORD lastErrno
, /* Win32 last error */
2065 const char *zFunc
, /* Name of OS function that failed */
2066 const char *zPath
, /* File path associated with error */
2067 int iLine
/* Source line number where error occurred */
2069 char zMsg
[500]; /* Human readable error text */
2070 int i
; /* Loop counter */
2073 winGetLastErrorMsg(lastErrno
, sizeof(zMsg
), zMsg
);
2074 assert( errcode
!=SQLITE_OK
);
2075 if( zPath
==0 ) zPath
= "";
2076 for(i
=0; zMsg
[i
] && zMsg
[i
]!='\r' && zMsg
[i
]!='\n'; i
++){}
2078 sqlite3_log(errcode
,
2079 "os_win.c:%d: (%lu) %s(%s) - %s",
2080 iLine
, lastErrno
, zFunc
, zPath
, zMsg
2087 ** The number of times that a ReadFile(), WriteFile(), and DeleteFile()
2088 ** will be retried following a locking error - probably caused by
2089 ** antivirus software. Also the initial delay before the first retry.
2090 ** The delay increases linearly with each retry.
2092 #ifndef SQLITE_WIN32_IOERR_RETRY
2093 # define SQLITE_WIN32_IOERR_RETRY 10
2095 #ifndef SQLITE_WIN32_IOERR_RETRY_DELAY
2096 # define SQLITE_WIN32_IOERR_RETRY_DELAY 25
2098 static int winIoerrRetry
= SQLITE_WIN32_IOERR_RETRY
;
2099 static int winIoerrRetryDelay
= SQLITE_WIN32_IOERR_RETRY_DELAY
;
2102 ** The "winIoerrCanRetry1" macro is used to determine if a particular I/O
2103 ** error code obtained via GetLastError() is eligible to be retried. It
2104 ** must accept the error code DWORD as its only argument and should return
2105 ** non-zero if the error code is transient in nature and the operation
2106 ** responsible for generating the original error might succeed upon being
2107 ** retried. The argument to this macro should be a variable.
2109 ** Additionally, a macro named "winIoerrCanRetry2" may be defined. If it
2110 ** is defined, it will be consulted only when the macro "winIoerrCanRetry1"
2111 ** returns zero. The "winIoerrCanRetry2" macro is completely optional and
2112 ** may be used to include additional error codes in the set that should
2113 ** result in the failing I/O operation being retried by the caller. If
2114 ** defined, the "winIoerrCanRetry2" macro must exhibit external semantics
2115 ** identical to those of the "winIoerrCanRetry1" macro.
2117 #if !defined(winIoerrCanRetry1)
2118 #define winIoerrCanRetry1(a) (((a)==ERROR_ACCESS_DENIED) || \
2119 ((a)==ERROR_SHARING_VIOLATION) || \
2120 ((a)==ERROR_LOCK_VIOLATION) || \
2121 ((a)==ERROR_DEV_NOT_EXIST) || \
2122 ((a)==ERROR_NETNAME_DELETED) || \
2123 ((a)==ERROR_SEM_TIMEOUT) || \
2124 ((a)==ERROR_NETWORK_UNREACHABLE))
2128 ** If a ReadFile() or WriteFile() error occurs, invoke this routine
2129 ** to see if it should be retried. Return TRUE to retry. Return FALSE
2130 ** to give up with an error.
2132 static int winRetryIoerr(int *pnRetry
, DWORD
*pError
){
2133 DWORD e
= osGetLastError();
2134 if( *pnRetry
>=winIoerrRetry
){
2140 if( winIoerrCanRetry1(e
) ){
2141 sqlite3_win32_sleep(winIoerrRetryDelay
*(1+*pnRetry
));
2145 #if defined(winIoerrCanRetry2)
2146 else if( winIoerrCanRetry2(e
) ){
2147 sqlite3_win32_sleep(winIoerrRetryDelay
*(1+*pnRetry
));
2159 ** Log a I/O error retry episode.
2161 static void winLogIoerr(int nRetry
, int lineno
){
2163 sqlite3_log(SQLITE_NOTICE
,
2164 "delayed %dms for lock/sharing conflict at line %d",
2165 winIoerrRetryDelay
*nRetry
*(nRetry
+1)/2, lineno
2171 ** This #if does not rely on the SQLITE_OS_WINCE define because the
2172 ** corresponding section in "date.c" cannot use it.
2174 #if !defined(SQLITE_OMIT_LOCALTIME) && defined(_WIN32_WCE) && \
2175 (!defined(SQLITE_MSVC_LOCALTIME_API) || !SQLITE_MSVC_LOCALTIME_API)
2177 ** The MSVC CRT on Windows CE may not have a localtime() function.
2178 ** So define a substitute.
2181 struct tm
*__cdecl
localtime(const time_t *t
)
2188 t64
= (t64
+ 11644473600)*10000000;
2189 uTm
.dwLowDateTime
= (DWORD
)(t64
& 0xFFFFFFFF);
2190 uTm
.dwHighDateTime
= (DWORD
)(t64
>> 32);
2191 osFileTimeToLocalFileTime(&uTm
,&lTm
);
2192 osFileTimeToSystemTime(&lTm
,&pTm
);
2193 y
.tm_year
= pTm
.wYear
- 1900;
2194 y
.tm_mon
= pTm
.wMonth
- 1;
2195 y
.tm_wday
= pTm
.wDayOfWeek
;
2196 y
.tm_mday
= pTm
.wDay
;
2197 y
.tm_hour
= pTm
.wHour
;
2198 y
.tm_min
= pTm
.wMinute
;
2199 y
.tm_sec
= pTm
.wSecond
;
2205 /*************************************************************************
2206 ** This section contains code for WinCE only.
2208 #define HANDLE_TO_WINFILE(a) (winFile*)&((char*)a)[-(int)offsetof(winFile,h)]
2211 ** Acquire a lock on the handle h
2213 static void winceMutexAcquire(HANDLE h
){
2216 dwErr
= osWaitForSingleObject(h
, INFINITE
);
2217 } while (dwErr
!= WAIT_OBJECT_0
&& dwErr
!= WAIT_ABANDONED
);
2220 ** Release a lock acquired by winceMutexAcquire()
2222 #define winceMutexRelease(h) ReleaseMutex(h)
2225 ** Create the mutex and shared memory used for locking in the file
2228 static int winceCreateLock(const char *zFilename
, winFile
*pFile
){
2232 BOOL bLogged
= FALSE
;
2235 zName
= winUtf8ToUnicode(zFilename
);
2238 return SQLITE_IOERR_NOMEM_BKPT
;
2241 /* Initialize the local lockdata */
2242 memset(&pFile
->local
, 0, sizeof(pFile
->local
));
2244 /* Replace the backslashes from the filename and lowercase it
2245 ** to derive a mutex name. */
2246 zTok
= osCharLowerW(zName
);
2247 for (;*zTok
;zTok
++){
2248 if (*zTok
== '\\') *zTok
= '_';
2251 /* Create/open the named mutex */
2252 pFile
->hMutex
= osCreateMutexW(NULL
, FALSE
, zName
);
2253 if (!pFile
->hMutex
){
2254 pFile
->lastErrno
= osGetLastError();
2255 sqlite3_free(zName
);
2256 return winLogError(SQLITE_IOERR
, pFile
->lastErrno
,
2257 "winceCreateLock1", zFilename
);
2260 /* Acquire the mutex before continuing */
2261 winceMutexAcquire(pFile
->hMutex
);
2263 /* Since the names of named mutexes, semaphores, file mappings etc are
2264 ** case-sensitive, take advantage of that by uppercasing the mutex name
2265 ** and using that as the shared filemapping name.
2267 osCharUpperW(zName
);
2268 pFile
->hShared
= osCreateFileMappingW(INVALID_HANDLE_VALUE
, NULL
,
2269 PAGE_READWRITE
, 0, sizeof(winceLock
),
2272 /* Set a flag that indicates we're the first to create the memory so it
2273 ** must be zero-initialized */
2274 lastErrno
= osGetLastError();
2275 if (lastErrno
== ERROR_ALREADY_EXISTS
){
2279 sqlite3_free(zName
);
2281 /* If we succeeded in making the shared memory handle, map it. */
2282 if( pFile
->hShared
){
2283 pFile
->shared
= (winceLock
*)osMapViewOfFile(pFile
->hShared
,
2284 FILE_MAP_READ
|FILE_MAP_WRITE
, 0, 0, sizeof(winceLock
));
2285 /* If mapping failed, close the shared memory handle and erase it */
2286 if( !pFile
->shared
){
2287 pFile
->lastErrno
= osGetLastError();
2288 winLogError(SQLITE_IOERR
, pFile
->lastErrno
,
2289 "winceCreateLock2", zFilename
);
2291 osCloseHandle(pFile
->hShared
);
2292 pFile
->hShared
= NULL
;
2296 /* If shared memory could not be created, then close the mutex and fail */
2297 if( pFile
->hShared
==NULL
){
2299 pFile
->lastErrno
= lastErrno
;
2300 winLogError(SQLITE_IOERR
, pFile
->lastErrno
,
2301 "winceCreateLock3", zFilename
);
2304 winceMutexRelease(pFile
->hMutex
);
2305 osCloseHandle(pFile
->hMutex
);
2306 pFile
->hMutex
= NULL
;
2307 return SQLITE_IOERR
;
2310 /* Initialize the shared memory if we're supposed to */
2312 memset(pFile
->shared
, 0, sizeof(winceLock
));
2315 winceMutexRelease(pFile
->hMutex
);
2320 ** Destroy the part of winFile that deals with wince locks
2322 static void winceDestroyLock(winFile
*pFile
){
2324 /* Acquire the mutex */
2325 winceMutexAcquire(pFile
->hMutex
);
2327 /* The following blocks should probably assert in debug mode, but they
2328 are to cleanup in case any locks remained open */
2329 if (pFile
->local
.nReaders
){
2330 pFile
->shared
->nReaders
--;
2332 if (pFile
->local
.bReserved
){
2333 pFile
->shared
->bReserved
= FALSE
;
2335 if (pFile
->local
.bPending
){
2336 pFile
->shared
->bPending
= FALSE
;
2338 if (pFile
->local
.bExclusive
){
2339 pFile
->shared
->bExclusive
= FALSE
;
2342 /* De-reference and close our copy of the shared memory handle */
2343 osUnmapViewOfFile(pFile
->shared
);
2344 osCloseHandle(pFile
->hShared
);
2346 /* Done with the mutex */
2347 winceMutexRelease(pFile
->hMutex
);
2348 osCloseHandle(pFile
->hMutex
);
2349 pFile
->hMutex
= NULL
;
2354 ** An implementation of the LockFile() API of Windows for CE
2356 static BOOL
winceLockFile(
2358 DWORD dwFileOffsetLow
,
2359 DWORD dwFileOffsetHigh
,
2360 DWORD nNumberOfBytesToLockLow
,
2361 DWORD nNumberOfBytesToLockHigh
2363 winFile
*pFile
= HANDLE_TO_WINFILE(phFile
);
2364 BOOL bReturn
= FALSE
;
2366 UNUSED_PARAMETER(dwFileOffsetHigh
);
2367 UNUSED_PARAMETER(nNumberOfBytesToLockHigh
);
2369 if (!pFile
->hMutex
) return TRUE
;
2370 winceMutexAcquire(pFile
->hMutex
);
2372 /* Wanting an exclusive lock? */
2373 if (dwFileOffsetLow
== (DWORD
)SHARED_FIRST
2374 && nNumberOfBytesToLockLow
== (DWORD
)SHARED_SIZE
){
2375 if (pFile
->shared
->nReaders
== 0 && pFile
->shared
->bExclusive
== 0){
2376 pFile
->shared
->bExclusive
= TRUE
;
2377 pFile
->local
.bExclusive
= TRUE
;
2382 /* Want a read-only lock? */
2383 else if (dwFileOffsetLow
== (DWORD
)SHARED_FIRST
&&
2384 nNumberOfBytesToLockLow
== 1){
2385 if (pFile
->shared
->bExclusive
== 0){
2386 pFile
->local
.nReaders
++;
2387 if (pFile
->local
.nReaders
== 1){
2388 pFile
->shared
->nReaders
++;
2394 /* Want a pending lock? */
2395 else if (dwFileOffsetLow
== (DWORD
)PENDING_BYTE
2396 && nNumberOfBytesToLockLow
== 1){
2397 /* If no pending lock has been acquired, then acquire it */
2398 if (pFile
->shared
->bPending
== 0) {
2399 pFile
->shared
->bPending
= TRUE
;
2400 pFile
->local
.bPending
= TRUE
;
2405 /* Want a reserved lock? */
2406 else if (dwFileOffsetLow
== (DWORD
)RESERVED_BYTE
2407 && nNumberOfBytesToLockLow
== 1){
2408 if (pFile
->shared
->bReserved
== 0) {
2409 pFile
->shared
->bReserved
= TRUE
;
2410 pFile
->local
.bReserved
= TRUE
;
2415 winceMutexRelease(pFile
->hMutex
);
2420 ** An implementation of the UnlockFile API of Windows for CE
2422 static BOOL
winceUnlockFile(
2424 DWORD dwFileOffsetLow
,
2425 DWORD dwFileOffsetHigh
,
2426 DWORD nNumberOfBytesToUnlockLow
,
2427 DWORD nNumberOfBytesToUnlockHigh
2429 winFile
*pFile
= HANDLE_TO_WINFILE(phFile
);
2430 BOOL bReturn
= FALSE
;
2432 UNUSED_PARAMETER(dwFileOffsetHigh
);
2433 UNUSED_PARAMETER(nNumberOfBytesToUnlockHigh
);
2435 if (!pFile
->hMutex
) return TRUE
;
2436 winceMutexAcquire(pFile
->hMutex
);
2438 /* Releasing a reader lock or an exclusive lock */
2439 if (dwFileOffsetLow
== (DWORD
)SHARED_FIRST
){
2440 /* Did we have an exclusive lock? */
2441 if (pFile
->local
.bExclusive
){
2442 assert(nNumberOfBytesToUnlockLow
== (DWORD
)SHARED_SIZE
);
2443 pFile
->local
.bExclusive
= FALSE
;
2444 pFile
->shared
->bExclusive
= FALSE
;
2448 /* Did we just have a reader lock? */
2449 else if (pFile
->local
.nReaders
){
2450 assert(nNumberOfBytesToUnlockLow
== (DWORD
)SHARED_SIZE
2451 || nNumberOfBytesToUnlockLow
== 1);
2452 pFile
->local
.nReaders
--;
2453 if (pFile
->local
.nReaders
== 0)
2455 pFile
->shared
->nReaders
--;
2461 /* Releasing a pending lock */
2462 else if (dwFileOffsetLow
== (DWORD
)PENDING_BYTE
2463 && nNumberOfBytesToUnlockLow
== 1){
2464 if (pFile
->local
.bPending
){
2465 pFile
->local
.bPending
= FALSE
;
2466 pFile
->shared
->bPending
= FALSE
;
2470 /* Releasing a reserved lock */
2471 else if (dwFileOffsetLow
== (DWORD
)RESERVED_BYTE
2472 && nNumberOfBytesToUnlockLow
== 1){
2473 if (pFile
->local
.bReserved
) {
2474 pFile
->local
.bReserved
= FALSE
;
2475 pFile
->shared
->bReserved
= FALSE
;
2480 winceMutexRelease(pFile
->hMutex
);
2484 ** End of the special code for wince
2485 *****************************************************************************/
2486 #endif /* SQLITE_OS_WINCE */
2489 ** Lock a file region.
2491 static BOOL
winLockFile(
2501 ** NOTE: Windows CE is handled differently here due its lack of the Win32
2504 return winceLockFile(phFile
, offsetLow
, offsetHigh
,
2505 numBytesLow
, numBytesHigh
);
2509 memset(&ovlp
, 0, sizeof(OVERLAPPED
));
2510 ovlp
.Offset
= offsetLow
;
2511 ovlp
.OffsetHigh
= offsetHigh
;
2512 return osLockFileEx(*phFile
, flags
, 0, numBytesLow
, numBytesHigh
, &ovlp
);
2514 return osLockFile(*phFile
, offsetLow
, offsetHigh
, numBytesLow
,
2521 ** Unlock a file region.
2523 static BOOL
winUnlockFile(
2532 ** NOTE: Windows CE is handled differently here due its lack of the Win32
2535 return winceUnlockFile(phFile
, offsetLow
, offsetHigh
,
2536 numBytesLow
, numBytesHigh
);
2540 memset(&ovlp
, 0, sizeof(OVERLAPPED
));
2541 ovlp
.Offset
= offsetLow
;
2542 ovlp
.OffsetHigh
= offsetHigh
;
2543 return osUnlockFileEx(*phFile
, 0, numBytesLow
, numBytesHigh
, &ovlp
);
2545 return osUnlockFile(*phFile
, offsetLow
, offsetHigh
, numBytesLow
,
2551 /*****************************************************************************
2552 ** The next group of routines implement the I/O methods specified
2553 ** by the sqlite3_io_methods object.
2554 ******************************************************************************/
2557 ** Some Microsoft compilers lack this definition.
2559 #ifndef INVALID_SET_FILE_POINTER
2560 # define INVALID_SET_FILE_POINTER ((DWORD)-1)
2564 ** Move the current position of the file handle passed as the first
2565 ** argument to offset iOffset within the file. If successful, return 0.
2566 ** Otherwise, set pFile->lastErrno and return non-zero.
2568 static int winSeekFile(winFile
*pFile
, sqlite3_int64 iOffset
){
2569 #if !SQLITE_OS_WINRT
2570 LONG upperBits
; /* Most sig. 32 bits of new offset */
2571 LONG lowerBits
; /* Least sig. 32 bits of new offset */
2572 DWORD dwRet
; /* Value returned by SetFilePointer() */
2573 DWORD lastErrno
; /* Value returned by GetLastError() */
2575 OSTRACE(("SEEK file=%p, offset=%lld\n", pFile
->h
, iOffset
));
2577 upperBits
= (LONG
)((iOffset
>>32) & 0x7fffffff);
2578 lowerBits
= (LONG
)(iOffset
& 0xffffffff);
2580 /* API oddity: If successful, SetFilePointer() returns a dword
2581 ** containing the lower 32-bits of the new file-offset. Or, if it fails,
2582 ** it returns INVALID_SET_FILE_POINTER. However according to MSDN,
2583 ** INVALID_SET_FILE_POINTER may also be a valid new offset. So to determine
2584 ** whether an error has actually occurred, it is also necessary to call
2587 dwRet
= osSetFilePointer(pFile
->h
, lowerBits
, &upperBits
, FILE_BEGIN
);
2589 if( (dwRet
==INVALID_SET_FILE_POINTER
2590 && ((lastErrno
= osGetLastError())!=NO_ERROR
)) ){
2591 pFile
->lastErrno
= lastErrno
;
2592 winLogError(SQLITE_IOERR_SEEK
, pFile
->lastErrno
,
2593 "winSeekFile", pFile
->zPath
);
2594 OSTRACE(("SEEK file=%p, rc=SQLITE_IOERR_SEEK\n", pFile
->h
));
2598 OSTRACE(("SEEK file=%p, rc=SQLITE_OK\n", pFile
->h
));
2602 ** Same as above, except that this implementation works for WinRT.
2605 LARGE_INTEGER x
; /* The new offset */
2606 BOOL bRet
; /* Value returned by SetFilePointerEx() */
2608 x
.QuadPart
= iOffset
;
2609 bRet
= osSetFilePointerEx(pFile
->h
, x
, 0, FILE_BEGIN
);
2612 pFile
->lastErrno
= osGetLastError();
2613 winLogError(SQLITE_IOERR_SEEK
, pFile
->lastErrno
,
2614 "winSeekFile", pFile
->zPath
);
2615 OSTRACE(("SEEK file=%p, rc=SQLITE_IOERR_SEEK\n", pFile
->h
));
2619 OSTRACE(("SEEK file=%p, rc=SQLITE_OK\n", pFile
->h
));
2624 #if SQLITE_MAX_MMAP_SIZE>0
2625 /* Forward references to VFS helper methods used for memory mapped files */
2626 static int winMapfile(winFile
*, sqlite3_int64
);
2627 static int winUnmapfile(winFile
*);
2633 ** It is reported that an attempt to close a handle might sometimes
2634 ** fail. This is a very unreasonable result, but Windows is notorious
2635 ** for being unreasonable so I do not doubt that it might happen. If
2636 ** the close fails, we pause for 100 milliseconds and try again. As
2637 ** many as MX_CLOSE_ATTEMPT attempts to close the handle are made before
2638 ** giving up and returning an error.
2640 #define MX_CLOSE_ATTEMPT 3
2641 static int winClose(sqlite3_file
*id
){
2643 winFile
*pFile
= (winFile
*)id
;
2646 #ifndef SQLITE_OMIT_WAL
2647 assert( pFile
->pShm
==0 );
2649 assert( pFile
->h
!=NULL
&& pFile
->h
!=INVALID_HANDLE_VALUE
);
2650 OSTRACE(("CLOSE pid=%lu, pFile=%p, file=%p\n",
2651 osGetCurrentProcessId(), pFile
, pFile
->h
));
2653 #if SQLITE_MAX_MMAP_SIZE>0
2654 winUnmapfile(pFile
);
2658 rc
= osCloseHandle(pFile
->h
);
2659 /* SimulateIOError( rc=0; cnt=MX_CLOSE_ATTEMPT; ); */
2660 }while( rc
==0 && ++cnt
< MX_CLOSE_ATTEMPT
&& (sqlite3_win32_sleep(100), 1) );
2662 #define WINCE_DELETION_ATTEMPTS 3
2664 winVfsAppData
*pAppData
= (winVfsAppData
*)pFile
->pVfs
->pAppData
;
2665 if( pAppData
==NULL
|| !pAppData
->bNoLock
){
2666 winceDestroyLock(pFile
);
2669 if( pFile
->zDeleteOnClose
){
2672 osDeleteFileW(pFile
->zDeleteOnClose
)==0
2673 && osGetFileAttributesW(pFile
->zDeleteOnClose
)!=0xffffffff
2674 && cnt
++ < WINCE_DELETION_ATTEMPTS
2676 sqlite3_win32_sleep(100); /* Wait a little before trying again */
2678 sqlite3_free(pFile
->zDeleteOnClose
);
2685 OSTRACE(("CLOSE pid=%lu, pFile=%p, file=%p, rc=%s\n",
2686 osGetCurrentProcessId(), pFile
, pFile
->h
, rc
? "ok" : "failed"));
2687 return rc
? SQLITE_OK
2688 : winLogError(SQLITE_IOERR_CLOSE
, osGetLastError(),
2689 "winClose", pFile
->zPath
);
2693 ** Read data from a file into a buffer. Return SQLITE_OK if all
2694 ** bytes were read successfully and SQLITE_IOERR if anything goes
2698 sqlite3_file
*id
, /* File to read from */
2699 void *pBuf
, /* Write content into this buffer */
2700 int amt
, /* Number of bytes to read */
2701 sqlite3_int64 offset
/* Begin reading at this offset */
2703 #if !SQLITE_OS_WINCE && !defined(SQLITE_WIN32_NO_OVERLAPPED)
2704 OVERLAPPED overlapped
; /* The offset for ReadFile. */
2706 winFile
*pFile
= (winFile
*)id
; /* file handle */
2707 DWORD nRead
; /* Number of bytes actually read from file */
2708 int nRetry
= 0; /* Number of retrys */
2712 assert( offset
>=0 );
2713 SimulateIOError(return SQLITE_IOERR_READ
);
2714 OSTRACE(("READ pid=%lu, pFile=%p, file=%p, buffer=%p, amount=%d, "
2715 "offset=%lld, lock=%d\n", osGetCurrentProcessId(), pFile
,
2716 pFile
->h
, pBuf
, amt
, offset
, pFile
->locktype
));
2718 #if SQLITE_MAX_MMAP_SIZE>0
2719 /* Deal with as much of this read request as possible by transfering
2720 ** data from the memory mapping using memcpy(). */
2721 if( offset
<pFile
->mmapSize
){
2722 if( offset
+amt
<= pFile
->mmapSize
){
2723 memcpy(pBuf
, &((u8
*)(pFile
->pMapRegion
))[offset
], amt
);
2724 OSTRACE(("READ-MMAP pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
2725 osGetCurrentProcessId(), pFile
, pFile
->h
));
2728 int nCopy
= (int)(pFile
->mmapSize
- offset
);
2729 memcpy(pBuf
, &((u8
*)(pFile
->pMapRegion
))[offset
], nCopy
);
2730 pBuf
= &((u8
*)pBuf
)[nCopy
];
2737 #if SQLITE_OS_WINCE || defined(SQLITE_WIN32_NO_OVERLAPPED)
2738 if( winSeekFile(pFile
, offset
) ){
2739 OSTRACE(("READ pid=%lu, pFile=%p, file=%p, rc=SQLITE_FULL\n",
2740 osGetCurrentProcessId(), pFile
, pFile
->h
));
2743 while( !osReadFile(pFile
->h
, pBuf
, amt
, &nRead
, 0) ){
2745 memset(&overlapped
, 0, sizeof(OVERLAPPED
));
2746 overlapped
.Offset
= (LONG
)(offset
& 0xffffffff);
2747 overlapped
.OffsetHigh
= (LONG
)((offset
>>32) & 0x7fffffff);
2748 while( !osReadFile(pFile
->h
, pBuf
, amt
, &nRead
, &overlapped
) &&
2749 osGetLastError()!=ERROR_HANDLE_EOF
){
2752 if( winRetryIoerr(&nRetry
, &lastErrno
) ) continue;
2753 pFile
->lastErrno
= lastErrno
;
2754 OSTRACE(("READ pid=%lu, pFile=%p, file=%p, rc=SQLITE_IOERR_READ\n",
2755 osGetCurrentProcessId(), pFile
, pFile
->h
));
2756 return winLogError(SQLITE_IOERR_READ
, pFile
->lastErrno
,
2757 "winRead", pFile
->zPath
);
2759 winLogIoerr(nRetry
, __LINE__
);
2760 if( nRead
<(DWORD
)amt
){
2761 /* Unread parts of the buffer must be zero-filled */
2762 memset(&((char*)pBuf
)[nRead
], 0, amt
-nRead
);
2763 OSTRACE(("READ pid=%lu, pFile=%p, file=%p, rc=SQLITE_IOERR_SHORT_READ\n",
2764 osGetCurrentProcessId(), pFile
, pFile
->h
));
2765 return SQLITE_IOERR_SHORT_READ
;
2768 OSTRACE(("READ pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
2769 osGetCurrentProcessId(), pFile
, pFile
->h
));
2774 ** Write data from a buffer into a file. Return SQLITE_OK on success
2775 ** or some other error code on failure.
2777 static int winWrite(
2778 sqlite3_file
*id
, /* File to write into */
2779 const void *pBuf
, /* The bytes to be written */
2780 int amt
, /* Number of bytes to write */
2781 sqlite3_int64 offset
/* Offset into the file to begin writing at */
2783 int rc
= 0; /* True if error has occurred, else false */
2784 winFile
*pFile
= (winFile
*)id
; /* File handle */
2785 int nRetry
= 0; /* Number of retries */
2789 SimulateIOError(return SQLITE_IOERR_WRITE
);
2790 SimulateDiskfullError(return SQLITE_FULL
);
2792 OSTRACE(("WRITE pid=%lu, pFile=%p, file=%p, buffer=%p, amount=%d, "
2793 "offset=%lld, lock=%d\n", osGetCurrentProcessId(), pFile
,
2794 pFile
->h
, pBuf
, amt
, offset
, pFile
->locktype
));
2796 #if defined(SQLITE_MMAP_READWRITE) && SQLITE_MAX_MMAP_SIZE>0
2797 /* Deal with as much of this write request as possible by transfering
2798 ** data from the memory mapping using memcpy(). */
2799 if( offset
<pFile
->mmapSize
){
2800 if( offset
+amt
<= pFile
->mmapSize
){
2801 memcpy(&((u8
*)(pFile
->pMapRegion
))[offset
], pBuf
, amt
);
2802 OSTRACE(("WRITE-MMAP pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
2803 osGetCurrentProcessId(), pFile
, pFile
->h
));
2806 int nCopy
= (int)(pFile
->mmapSize
- offset
);
2807 memcpy(&((u8
*)(pFile
->pMapRegion
))[offset
], pBuf
, nCopy
);
2808 pBuf
= &((u8
*)pBuf
)[nCopy
];
2815 #if SQLITE_OS_WINCE || defined(SQLITE_WIN32_NO_OVERLAPPED)
2816 rc
= winSeekFile(pFile
, offset
);
2821 #if !SQLITE_OS_WINCE && !defined(SQLITE_WIN32_NO_OVERLAPPED)
2822 OVERLAPPED overlapped
; /* The offset for WriteFile. */
2824 u8
*aRem
= (u8
*)pBuf
; /* Data yet to be written */
2825 int nRem
= amt
; /* Number of bytes yet to be written */
2826 DWORD nWrite
; /* Bytes written by each WriteFile() call */
2827 DWORD lastErrno
= NO_ERROR
; /* Value returned by GetLastError() */
2829 #if !SQLITE_OS_WINCE && !defined(SQLITE_WIN32_NO_OVERLAPPED)
2830 memset(&overlapped
, 0, sizeof(OVERLAPPED
));
2831 overlapped
.Offset
= (LONG
)(offset
& 0xffffffff);
2832 overlapped
.OffsetHigh
= (LONG
)((offset
>>32) & 0x7fffffff);
2836 #if SQLITE_OS_WINCE || defined(SQLITE_WIN32_NO_OVERLAPPED)
2837 if( !osWriteFile(pFile
->h
, aRem
, nRem
, &nWrite
, 0) ){
2839 if( !osWriteFile(pFile
->h
, aRem
, nRem
, &nWrite
, &overlapped
) ){
2841 if( winRetryIoerr(&nRetry
, &lastErrno
) ) continue;
2844 assert( nWrite
==0 || nWrite
<=(DWORD
)nRem
);
2845 if( nWrite
==0 || nWrite
>(DWORD
)nRem
){
2846 lastErrno
= osGetLastError();
2849 #if !SQLITE_OS_WINCE && !defined(SQLITE_WIN32_NO_OVERLAPPED)
2851 overlapped
.Offset
= (LONG
)(offset
& 0xffffffff);
2852 overlapped
.OffsetHigh
= (LONG
)((offset
>>32) & 0x7fffffff);
2858 pFile
->lastErrno
= lastErrno
;
2864 if( ( pFile
->lastErrno
==ERROR_HANDLE_DISK_FULL
)
2865 || ( pFile
->lastErrno
==ERROR_DISK_FULL
)){
2866 OSTRACE(("WRITE pid=%lu, pFile=%p, file=%p, rc=SQLITE_FULL\n",
2867 osGetCurrentProcessId(), pFile
, pFile
->h
));
2868 return winLogError(SQLITE_FULL
, pFile
->lastErrno
,
2869 "winWrite1", pFile
->zPath
);
2871 OSTRACE(("WRITE pid=%lu, pFile=%p, file=%p, rc=SQLITE_IOERR_WRITE\n",
2872 osGetCurrentProcessId(), pFile
, pFile
->h
));
2873 return winLogError(SQLITE_IOERR_WRITE
, pFile
->lastErrno
,
2874 "winWrite2", pFile
->zPath
);
2876 winLogIoerr(nRetry
, __LINE__
);
2878 OSTRACE(("WRITE pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
2879 osGetCurrentProcessId(), pFile
, pFile
->h
));
2884 ** Truncate an open file to a specified size
2886 static int winTruncate(sqlite3_file
*id
, sqlite3_int64 nByte
){
2887 winFile
*pFile
= (winFile
*)id
; /* File handle object */
2888 int rc
= SQLITE_OK
; /* Return code for this function */
2892 SimulateIOError(return SQLITE_IOERR_TRUNCATE
);
2893 OSTRACE(("TRUNCATE pid=%lu, pFile=%p, file=%p, size=%lld, lock=%d\n",
2894 osGetCurrentProcessId(), pFile
, pFile
->h
, nByte
, pFile
->locktype
));
2896 /* If the user has configured a chunk-size for this file, truncate the
2897 ** file so that it consists of an integer number of chunks (i.e. the
2898 ** actual file size after the operation may be larger than the requested
2901 if( pFile
->szChunk
>0 ){
2902 nByte
= ((nByte
+ pFile
->szChunk
- 1)/pFile
->szChunk
) * pFile
->szChunk
;
2905 /* SetEndOfFile() returns non-zero when successful, or zero when it fails. */
2906 if( winSeekFile(pFile
, nByte
) ){
2907 rc
= winLogError(SQLITE_IOERR_TRUNCATE
, pFile
->lastErrno
,
2908 "winTruncate1", pFile
->zPath
);
2909 }else if( 0==osSetEndOfFile(pFile
->h
) &&
2910 ((lastErrno
= osGetLastError())!=ERROR_USER_MAPPED_FILE
) ){
2911 pFile
->lastErrno
= lastErrno
;
2912 rc
= winLogError(SQLITE_IOERR_TRUNCATE
, pFile
->lastErrno
,
2913 "winTruncate2", pFile
->zPath
);
2916 #if SQLITE_MAX_MMAP_SIZE>0
2917 /* If the file was truncated to a size smaller than the currently
2918 ** mapped region, reduce the effective mapping size as well. SQLite will
2919 ** use read() and write() to access data beyond this point from now on.
2921 if( pFile
->pMapRegion
&& nByte
<pFile
->mmapSize
){
2922 pFile
->mmapSize
= nByte
;
2926 OSTRACE(("TRUNCATE pid=%lu, pFile=%p, file=%p, rc=%s\n",
2927 osGetCurrentProcessId(), pFile
, pFile
->h
, sqlite3ErrName(rc
)));
2933 ** Count the number of fullsyncs and normal syncs. This is used to test
2934 ** that syncs and fullsyncs are occuring at the right times.
2936 int sqlite3_sync_count
= 0;
2937 int sqlite3_fullsync_count
= 0;
2941 ** Make sure all writes to a particular file are committed to disk.
2943 static int winSync(sqlite3_file
*id
, int flags
){
2944 #ifndef SQLITE_NO_SYNC
2946 ** Used only when SQLITE_NO_SYNC is not defined.
2950 #if !defined(NDEBUG) || !defined(SQLITE_NO_SYNC) || \
2951 defined(SQLITE_HAVE_OS_TRACE)
2953 ** Used when SQLITE_NO_SYNC is not defined and by the assert() and/or
2954 ** OSTRACE() macros.
2956 winFile
*pFile
= (winFile
*)id
;
2958 UNUSED_PARAMETER(id
);
2962 /* Check that one of SQLITE_SYNC_NORMAL or FULL was passed */
2963 assert((flags
&0x0F)==SQLITE_SYNC_NORMAL
2964 || (flags
&0x0F)==SQLITE_SYNC_FULL
2967 /* Unix cannot, but some systems may return SQLITE_FULL from here. This
2968 ** line is to test that doing so does not cause any problems.
2970 SimulateDiskfullError( return SQLITE_FULL
);
2972 OSTRACE(("SYNC pid=%lu, pFile=%p, file=%p, flags=%x, lock=%d\n",
2973 osGetCurrentProcessId(), pFile
, pFile
->h
, flags
,
2977 UNUSED_PARAMETER(flags
);
2979 if( (flags
&0x0F)==SQLITE_SYNC_FULL
){
2980 sqlite3_fullsync_count
++;
2982 sqlite3_sync_count
++;
2985 /* If we compiled with the SQLITE_NO_SYNC flag, then syncing is a
2988 #ifdef SQLITE_NO_SYNC
2989 OSTRACE(("SYNC-NOP pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
2990 osGetCurrentProcessId(), pFile
, pFile
->h
));
2993 #if SQLITE_MAX_MMAP_SIZE>0
2994 if( pFile
->pMapRegion
){
2995 if( osFlushViewOfFile(pFile
->pMapRegion
, 0) ){
2996 OSTRACE(("SYNC-MMAP pid=%lu, pFile=%p, pMapRegion=%p, "
2997 "rc=SQLITE_OK\n", osGetCurrentProcessId(),
2998 pFile
, pFile
->pMapRegion
));
3000 pFile
->lastErrno
= osGetLastError();
3001 OSTRACE(("SYNC-MMAP pid=%lu, pFile=%p, pMapRegion=%p, "
3002 "rc=SQLITE_IOERR_MMAP\n", osGetCurrentProcessId(),
3003 pFile
, pFile
->pMapRegion
));
3004 return winLogError(SQLITE_IOERR_MMAP
, pFile
->lastErrno
,
3005 "winSync1", pFile
->zPath
);
3009 rc
= osFlushFileBuffers(pFile
->h
);
3010 SimulateIOError( rc
=FALSE
);
3012 OSTRACE(("SYNC pid=%lu, pFile=%p, file=%p, rc=SQLITE_OK\n",
3013 osGetCurrentProcessId(), pFile
, pFile
->h
));
3016 pFile
->lastErrno
= osGetLastError();
3017 OSTRACE(("SYNC pid=%lu, pFile=%p, file=%p, rc=SQLITE_IOERR_FSYNC\n",
3018 osGetCurrentProcessId(), pFile
, pFile
->h
));
3019 return winLogError(SQLITE_IOERR_FSYNC
, pFile
->lastErrno
,
3020 "winSync2", pFile
->zPath
);
3026 ** Determine the current size of a file in bytes
3028 static int winFileSize(sqlite3_file
*id
, sqlite3_int64
*pSize
){
3029 winFile
*pFile
= (winFile
*)id
;
3034 SimulateIOError(return SQLITE_IOERR_FSTAT
);
3035 OSTRACE(("SIZE file=%p, pSize=%p\n", pFile
->h
, pSize
));
3039 FILE_STANDARD_INFO info
;
3040 if( osGetFileInformationByHandleEx(pFile
->h
, FileStandardInfo
,
3041 &info
, sizeof(info
)) ){
3042 *pSize
= info
.EndOfFile
.QuadPart
;
3044 pFile
->lastErrno
= osGetLastError();
3045 rc
= winLogError(SQLITE_IOERR_FSTAT
, pFile
->lastErrno
,
3046 "winFileSize", pFile
->zPath
);
3055 lowerBits
= osGetFileSize(pFile
->h
, &upperBits
);
3056 *pSize
= (((sqlite3_int64
)upperBits
)<<32) + lowerBits
;
3057 if( (lowerBits
== INVALID_FILE_SIZE
)
3058 && ((lastErrno
= osGetLastError())!=NO_ERROR
) ){
3059 pFile
->lastErrno
= lastErrno
;
3060 rc
= winLogError(SQLITE_IOERR_FSTAT
, pFile
->lastErrno
,
3061 "winFileSize", pFile
->zPath
);
3065 OSTRACE(("SIZE file=%p, pSize=%p, *pSize=%lld, rc=%s\n",
3066 pFile
->h
, pSize
, *pSize
, sqlite3ErrName(rc
)));
3071 ** LOCKFILE_FAIL_IMMEDIATELY is undefined on some Windows systems.
3073 #ifndef LOCKFILE_FAIL_IMMEDIATELY
3074 # define LOCKFILE_FAIL_IMMEDIATELY 1
3077 #ifndef LOCKFILE_EXCLUSIVE_LOCK
3078 # define LOCKFILE_EXCLUSIVE_LOCK 2
3082 ** Historically, SQLite has used both the LockFile and LockFileEx functions.
3083 ** When the LockFile function was used, it was always expected to fail
3084 ** immediately if the lock could not be obtained. Also, it always expected to
3085 ** obtain an exclusive lock. These flags are used with the LockFileEx function
3086 ** and reflect those expectations; therefore, they should not be changed.
3088 #ifndef SQLITE_LOCKFILE_FLAGS
3089 # define SQLITE_LOCKFILE_FLAGS (LOCKFILE_FAIL_IMMEDIATELY | \
3090 LOCKFILE_EXCLUSIVE_LOCK)
3094 ** Currently, SQLite never calls the LockFileEx function without wanting the
3095 ** call to fail immediately if the lock cannot be obtained.
3097 #ifndef SQLITE_LOCKFILEEX_FLAGS
3098 # define SQLITE_LOCKFILEEX_FLAGS (LOCKFILE_FAIL_IMMEDIATELY)
3102 ** Acquire a reader lock.
3103 ** Different API routines are called depending on whether or not this
3104 ** is Win9x or WinNT.
3106 static int winGetReadLock(winFile
*pFile
){
3108 OSTRACE(("READ-LOCK file=%p, lock=%d\n", pFile
->h
, pFile
->locktype
));
3112 ** NOTE: Windows CE is handled differently here due its lack of the Win32
3115 res
= winceLockFile(&pFile
->h
, SHARED_FIRST
, 0, 1, 0);
3117 res
= winLockFile(&pFile
->h
, SQLITE_LOCKFILEEX_FLAGS
, SHARED_FIRST
, 0,
3121 #ifdef SQLITE_WIN32_HAS_ANSI
3124 sqlite3_randomness(sizeof(lk
), &lk
);
3125 pFile
->sharedLockByte
= (short)((lk
& 0x7fffffff)%(SHARED_SIZE
- 1));
3126 res
= winLockFile(&pFile
->h
, SQLITE_LOCKFILE_FLAGS
,
3127 SHARED_FIRST
+pFile
->sharedLockByte
, 0, 1, 0);
3131 pFile
->lastErrno
= osGetLastError();
3132 /* No need to log a failure to lock */
3134 OSTRACE(("READ-LOCK file=%p, result=%d\n", pFile
->h
, res
));
3141 static int winUnlockReadLock(winFile
*pFile
){
3144 OSTRACE(("READ-UNLOCK file=%p, lock=%d\n", pFile
->h
, pFile
->locktype
));
3146 res
= winUnlockFile(&pFile
->h
, SHARED_FIRST
, 0, SHARED_SIZE
, 0);
3148 #ifdef SQLITE_WIN32_HAS_ANSI
3150 res
= winUnlockFile(&pFile
->h
, SHARED_FIRST
+pFile
->sharedLockByte
, 0, 1, 0);
3153 if( res
==0 && ((lastErrno
= osGetLastError())!=ERROR_NOT_LOCKED
) ){
3154 pFile
->lastErrno
= lastErrno
;
3155 winLogError(SQLITE_IOERR_UNLOCK
, pFile
->lastErrno
,
3156 "winUnlockReadLock", pFile
->zPath
);
3158 OSTRACE(("READ-UNLOCK file=%p, result=%d\n", pFile
->h
, res
));
3163 ** Lock the file with the lock specified by parameter locktype - one
3164 ** of the following:
3167 ** (2) RESERVED_LOCK
3169 ** (4) EXCLUSIVE_LOCK
3171 ** Sometimes when requesting one lock state, additional lock states
3172 ** are inserted in between. The locking might fail on one of the later
3173 ** transitions leaving the lock state different from what it started but
3174 ** still short of its goal. The following chart shows the allowed
3175 ** transitions and the inserted intermediate states:
3177 ** UNLOCKED -> SHARED
3178 ** SHARED -> RESERVED
3179 ** SHARED -> (PENDING) -> EXCLUSIVE
3180 ** RESERVED -> (PENDING) -> EXCLUSIVE
3181 ** PENDING -> EXCLUSIVE
3183 ** This routine will only increase a lock. The winUnlock() routine
3184 ** erases all locks at once and returns us immediately to locking level 0.
3185 ** It is not possible to lower the locking level one step at a time. You
3186 ** must go straight to locking level 0.
3188 static int winLock(sqlite3_file
*id
, int locktype
){
3189 int rc
= SQLITE_OK
; /* Return code from subroutines */
3190 int res
= 1; /* Result of a Windows lock call */
3191 int newLocktype
; /* Set pFile->locktype to this value before exiting */
3192 int gotPendingLock
= 0;/* True if we acquired a PENDING lock this time */
3193 winFile
*pFile
= (winFile
*)id
;
3194 DWORD lastErrno
= NO_ERROR
;
3197 OSTRACE(("LOCK file=%p, oldLock=%d(%d), newLock=%d\n",
3198 pFile
->h
, pFile
->locktype
, pFile
->sharedLockByte
, locktype
));
3200 /* If there is already a lock of this type or more restrictive on the
3201 ** OsFile, do nothing. Don't use the end_lock: exit path, as
3202 ** sqlite3OsEnterMutex() hasn't been called yet.
3204 if( pFile
->locktype
>=locktype
){
3205 OSTRACE(("LOCK-HELD file=%p, rc=SQLITE_OK\n", pFile
->h
));
3209 /* Do not allow any kind of write-lock on a read-only database
3211 if( (pFile
->ctrlFlags
& WINFILE_RDONLY
)!=0 && locktype
>=RESERVED_LOCK
){
3212 return SQLITE_IOERR_LOCK
;
3215 /* Make sure the locking sequence is correct
3217 assert( pFile
->locktype
!=NO_LOCK
|| locktype
==SHARED_LOCK
);
3218 assert( locktype
!=PENDING_LOCK
);
3219 assert( locktype
!=RESERVED_LOCK
|| pFile
->locktype
==SHARED_LOCK
);
3221 /* Lock the PENDING_LOCK byte if we need to acquire a PENDING lock or
3222 ** a SHARED lock. If we are acquiring a SHARED lock, the acquisition of
3223 ** the PENDING_LOCK byte is temporary.
3225 newLocktype
= pFile
->locktype
;
3226 if( pFile
->locktype
==NO_LOCK
3227 || (locktype
==EXCLUSIVE_LOCK
&& pFile
->locktype
<=RESERVED_LOCK
)
3230 while( cnt
-->0 && (res
= winLockFile(&pFile
->h
, SQLITE_LOCKFILE_FLAGS
,
3231 PENDING_BYTE
, 0, 1, 0))==0 ){
3232 /* Try 3 times to get the pending lock. This is needed to work
3233 ** around problems caused by indexing and/or anti-virus software on
3235 ** If you are using this code as a model for alternative VFSes, do not
3236 ** copy this retry logic. It is a hack intended for Windows only.
3238 lastErrno
= osGetLastError();
3239 OSTRACE(("LOCK-PENDING-FAIL file=%p, count=%d, result=%d\n",
3240 pFile
->h
, cnt
, res
));
3241 if( lastErrno
==ERROR_INVALID_HANDLE
){
3242 pFile
->lastErrno
= lastErrno
;
3243 rc
= SQLITE_IOERR_LOCK
;
3244 OSTRACE(("LOCK-FAIL file=%p, count=%d, rc=%s\n",
3245 pFile
->h
, cnt
, sqlite3ErrName(rc
)));
3248 if( cnt
) sqlite3_win32_sleep(1);
3250 gotPendingLock
= res
;
3252 lastErrno
= osGetLastError();
3256 /* Acquire a shared lock
3258 if( locktype
==SHARED_LOCK
&& res
){
3259 assert( pFile
->locktype
==NO_LOCK
);
3260 res
= winGetReadLock(pFile
);
3262 newLocktype
= SHARED_LOCK
;
3264 lastErrno
= osGetLastError();
3268 /* Acquire a RESERVED lock
3270 if( locktype
==RESERVED_LOCK
&& res
){
3271 assert( pFile
->locktype
==SHARED_LOCK
);
3272 res
= winLockFile(&pFile
->h
, SQLITE_LOCKFILE_FLAGS
, RESERVED_BYTE
, 0, 1, 0);
3274 newLocktype
= RESERVED_LOCK
;
3276 lastErrno
= osGetLastError();
3280 /* Acquire a PENDING lock
3282 if( locktype
==EXCLUSIVE_LOCK
&& res
){
3283 newLocktype
= PENDING_LOCK
;
3287 /* Acquire an EXCLUSIVE lock
3289 if( locktype
==EXCLUSIVE_LOCK
&& res
){
3290 assert( pFile
->locktype
>=SHARED_LOCK
);
3291 res
= winUnlockReadLock(pFile
);
3292 res
= winLockFile(&pFile
->h
, SQLITE_LOCKFILE_FLAGS
, SHARED_FIRST
, 0,
3295 newLocktype
= EXCLUSIVE_LOCK
;
3297 lastErrno
= osGetLastError();
3298 winGetReadLock(pFile
);
3302 /* If we are holding a PENDING lock that ought to be released, then
3305 if( gotPendingLock
&& locktype
==SHARED_LOCK
){
3306 winUnlockFile(&pFile
->h
, PENDING_BYTE
, 0, 1, 0);
3309 /* Update the state of the lock has held in the file descriptor then
3310 ** return the appropriate result code.
3315 pFile
->lastErrno
= lastErrno
;
3317 OSTRACE(("LOCK-FAIL file=%p, wanted=%d, got=%d\n",
3318 pFile
->h
, locktype
, newLocktype
));
3320 pFile
->locktype
= (u8
)newLocktype
;
3321 OSTRACE(("LOCK file=%p, lock=%d, rc=%s\n",
3322 pFile
->h
, pFile
->locktype
, sqlite3ErrName(rc
)));
3327 ** This routine checks if there is a RESERVED lock held on the specified
3328 ** file by this or any other process. If such a lock is held, return
3329 ** non-zero, otherwise zero.
3331 static int winCheckReservedLock(sqlite3_file
*id
, int *pResOut
){
3333 winFile
*pFile
= (winFile
*)id
;
3335 SimulateIOError( return SQLITE_IOERR_CHECKRESERVEDLOCK
; );
3336 OSTRACE(("TEST-WR-LOCK file=%p, pResOut=%p\n", pFile
->h
, pResOut
));
3339 if( pFile
->locktype
>=RESERVED_LOCK
){
3341 OSTRACE(("TEST-WR-LOCK file=%p, result=%d (local)\n", pFile
->h
, res
));
3343 res
= winLockFile(&pFile
->h
, SQLITE_LOCKFILEEX_FLAGS
,RESERVED_BYTE
,0,1,0);
3345 winUnlockFile(&pFile
->h
, RESERVED_BYTE
, 0, 1, 0);
3348 OSTRACE(("TEST-WR-LOCK file=%p, result=%d (remote)\n", pFile
->h
, res
));
3351 OSTRACE(("TEST-WR-LOCK file=%p, pResOut=%p, *pResOut=%d, rc=SQLITE_OK\n",
3352 pFile
->h
, pResOut
, *pResOut
));
3357 ** Lower the locking level on file descriptor id to locktype. locktype
3358 ** must be either NO_LOCK or SHARED_LOCK.
3360 ** If the locking level of the file descriptor is already at or below
3361 ** the requested locking level, this routine is a no-op.
3363 ** It is not possible for this routine to fail if the second argument
3364 ** is NO_LOCK. If the second argument is SHARED_LOCK then this routine
3365 ** might return SQLITE_IOERR;
3367 static int winUnlock(sqlite3_file
*id
, int locktype
){
3369 winFile
*pFile
= (winFile
*)id
;
3372 assert( locktype
<=SHARED_LOCK
);
3373 OSTRACE(("UNLOCK file=%p, oldLock=%d(%d), newLock=%d\n",
3374 pFile
->h
, pFile
->locktype
, pFile
->sharedLockByte
, locktype
));
3375 type
= pFile
->locktype
;
3376 if( type
>=EXCLUSIVE_LOCK
){
3377 winUnlockFile(&pFile
->h
, SHARED_FIRST
, 0, SHARED_SIZE
, 0);
3378 if( locktype
==SHARED_LOCK
&& !winGetReadLock(pFile
) ){
3379 /* This should never happen. We should always be able to
3380 ** reacquire the read lock */
3381 rc
= winLogError(SQLITE_IOERR_UNLOCK
, osGetLastError(),
3382 "winUnlock", pFile
->zPath
);
3385 if( type
>=RESERVED_LOCK
){
3386 winUnlockFile(&pFile
->h
, RESERVED_BYTE
, 0, 1, 0);
3388 if( locktype
==NO_LOCK
&& type
>=SHARED_LOCK
){
3389 winUnlockReadLock(pFile
);
3391 if( type
>=PENDING_LOCK
){
3392 winUnlockFile(&pFile
->h
, PENDING_BYTE
, 0, 1, 0);
3394 pFile
->locktype
= (u8
)locktype
;
3395 OSTRACE(("UNLOCK file=%p, lock=%d, rc=%s\n",
3396 pFile
->h
, pFile
->locktype
, sqlite3ErrName(rc
)));
3400 /******************************************************************************
3401 ****************************** No-op Locking **********************************
3403 ** Of the various locking implementations available, this is by far the
3404 ** simplest: locking is ignored. No attempt is made to lock the database
3405 ** file for reading or writing.
3407 ** This locking mode is appropriate for use on read-only databases
3408 ** (ex: databases that are burned into CD-ROM, for example.) It can
3409 ** also be used if the application employs some external mechanism to
3410 ** prevent simultaneous access of the same database by two or more
3411 ** database connections. But there is a serious risk of database
3412 ** corruption if this locking mode is used in situations where multiple
3413 ** database connections are accessing the same database file at the same
3414 ** time and one or more of those connections are writing.
3417 static int winNolockLock(sqlite3_file
*id
, int locktype
){
3418 UNUSED_PARAMETER(id
);
3419 UNUSED_PARAMETER(locktype
);
3423 static int winNolockCheckReservedLock(sqlite3_file
*id
, int *pResOut
){
3424 UNUSED_PARAMETER(id
);
3425 UNUSED_PARAMETER(pResOut
);
3429 static int winNolockUnlock(sqlite3_file
*id
, int locktype
){
3430 UNUSED_PARAMETER(id
);
3431 UNUSED_PARAMETER(locktype
);
3435 /******************* End of the no-op lock implementation *********************
3436 ******************************************************************************/
3439 ** If *pArg is initially negative then this is a query. Set *pArg to
3440 ** 1 or 0 depending on whether or not bit mask of pFile->ctrlFlags is set.
3442 ** If *pArg is 0 or 1, then clear or set the mask bit of pFile->ctrlFlags.
3444 static void winModeBit(winFile
*pFile
, unsigned char mask
, int *pArg
){
3446 *pArg
= (pFile
->ctrlFlags
& mask
)!=0;
3447 }else if( (*pArg
)==0 ){
3448 pFile
->ctrlFlags
&= ~mask
;
3450 pFile
->ctrlFlags
|= mask
;
3454 /* Forward references to VFS helper methods used for temporary files */
3455 static int winGetTempname(sqlite3_vfs
*, char **);
3456 static int winIsDir(const void *);
3457 static BOOL
winIsDriveLetterAndColon(const char *);
3460 ** Control and query of the open file handle.
3462 static int winFileControl(sqlite3_file
*id
, int op
, void *pArg
){
3463 winFile
*pFile
= (winFile
*)id
;
3464 OSTRACE(("FCNTL file=%p, op=%d, pArg=%p\n", pFile
->h
, op
, pArg
));
3466 case SQLITE_FCNTL_LOCKSTATE
: {
3467 *(int*)pArg
= pFile
->locktype
;
3468 OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile
->h
));
3471 case SQLITE_FCNTL_LAST_ERRNO
: {
3472 *(int*)pArg
= (int)pFile
->lastErrno
;
3473 OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile
->h
));
3476 case SQLITE_FCNTL_CHUNK_SIZE
: {
3477 pFile
->szChunk
= *(int *)pArg
;
3478 OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile
->h
));
3481 case SQLITE_FCNTL_SIZE_HINT
: {
3482 if( pFile
->szChunk
>0 ){
3483 sqlite3_int64 oldSz
;
3484 int rc
= winFileSize(id
, &oldSz
);
3485 if( rc
==SQLITE_OK
){
3486 sqlite3_int64 newSz
= *(sqlite3_int64
*)pArg
;
3488 SimulateIOErrorBenign(1);
3489 rc
= winTruncate(id
, newSz
);
3490 SimulateIOErrorBenign(0);
3493 OSTRACE(("FCNTL file=%p, rc=%s\n", pFile
->h
, sqlite3ErrName(rc
)));
3496 OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile
->h
));
3499 case SQLITE_FCNTL_PERSIST_WAL
: {
3500 winModeBit(pFile
, WINFILE_PERSIST_WAL
, (int*)pArg
);
3501 OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile
->h
));
3504 case SQLITE_FCNTL_POWERSAFE_OVERWRITE
: {
3505 winModeBit(pFile
, WINFILE_PSOW
, (int*)pArg
);
3506 OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile
->h
));
3509 case SQLITE_FCNTL_VFSNAME
: {
3510 *(char**)pArg
= sqlite3_mprintf("%s", pFile
->pVfs
->zName
);
3511 OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile
->h
));
3514 case SQLITE_FCNTL_WIN32_AV_RETRY
: {
3515 int *a
= (int*)pArg
;
3517 winIoerrRetry
= a
[0];
3519 a
[0] = winIoerrRetry
;
3522 winIoerrRetryDelay
= a
[1];
3524 a
[1] = winIoerrRetryDelay
;
3526 OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile
->h
));
3529 case SQLITE_FCNTL_WIN32_GET_HANDLE
: {
3530 LPHANDLE phFile
= (LPHANDLE
)pArg
;
3532 OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile
->h
));
3536 case SQLITE_FCNTL_WIN32_SET_HANDLE
: {
3537 LPHANDLE phFile
= (LPHANDLE
)pArg
;
3538 HANDLE hOldFile
= pFile
->h
;
3541 OSTRACE(("FCNTL oldFile=%p, newFile=%p, rc=SQLITE_OK\n",
3542 hOldFile
, pFile
->h
));
3546 case SQLITE_FCNTL_TEMPFILENAME
: {
3548 int rc
= winGetTempname(pFile
->pVfs
, &zTFile
);
3549 if( rc
==SQLITE_OK
){
3550 *(char**)pArg
= zTFile
;
3552 OSTRACE(("FCNTL file=%p, rc=%s\n", pFile
->h
, sqlite3ErrName(rc
)));
3555 #if SQLITE_MAX_MMAP_SIZE>0
3556 case SQLITE_FCNTL_MMAP_SIZE
: {
3557 i64 newLimit
= *(i64
*)pArg
;
3559 if( newLimit
>sqlite3GlobalConfig
.mxMmap
){
3560 newLimit
= sqlite3GlobalConfig
.mxMmap
;
3563 /* The value of newLimit may be eventually cast to (SIZE_T) and passed
3564 ** to MapViewOfFile(). Restrict its value to 2GB if (SIZE_T) is not at
3565 ** least a 64-bit type. */
3566 if( newLimit
>0 && sizeof(SIZE_T
)<8 ){
3567 newLimit
= (newLimit
& 0x7FFFFFFF);
3570 *(i64
*)pArg
= pFile
->mmapSizeMax
;
3571 if( newLimit
>=0 && newLimit
!=pFile
->mmapSizeMax
&& pFile
->nFetchOut
==0 ){
3572 pFile
->mmapSizeMax
= newLimit
;
3573 if( pFile
->mmapSize
>0 ){
3574 winUnmapfile(pFile
);
3575 rc
= winMapfile(pFile
, -1);
3578 OSTRACE(("FCNTL file=%p, rc=%s\n", pFile
->h
, sqlite3ErrName(rc
)));
3583 OSTRACE(("FCNTL file=%p, rc=SQLITE_NOTFOUND\n", pFile
->h
));
3584 return SQLITE_NOTFOUND
;
3588 ** Return the sector size in bytes of the underlying block device for
3589 ** the specified file. This is almost always 512 bytes, but may be
3590 ** larger for some devices.
3592 ** SQLite code assumes this function cannot fail. It also assumes that
3593 ** if two files are created in the same file-system directory (i.e.
3594 ** a database and its journal file) that the sector size will be the
3597 static int winSectorSize(sqlite3_file
*id
){
3599 return SQLITE_DEFAULT_SECTOR_SIZE
;
3603 ** Return a vector of device characteristics.
3605 static int winDeviceCharacteristics(sqlite3_file
*id
){
3606 winFile
*p
= (winFile
*)id
;
3607 return SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN
|
3608 ((p
->ctrlFlags
& WINFILE_PSOW
)?SQLITE_IOCAP_POWERSAFE_OVERWRITE
:0);
3612 ** Windows will only let you create file view mappings
3613 ** on allocation size granularity boundaries.
3614 ** During sqlite3_os_init() we do a GetSystemInfo()
3615 ** to get the granularity size.
3617 static SYSTEM_INFO winSysInfo
;
3619 #ifndef SQLITE_OMIT_WAL
3622 ** Helper functions to obtain and relinquish the global mutex. The
3623 ** global mutex is used to protect the winLockInfo objects used by
3624 ** this file, all of which may be shared by multiple threads.
3626 ** Function winShmMutexHeld() is used to assert() that the global mutex
3627 ** is held when required. This function is only used as part of assert()
3630 ** winShmEnterMutex()
3631 ** assert( winShmMutexHeld() );
3632 ** winShmLeaveMutex()
3634 static void winShmEnterMutex(void){
3635 sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1
));
3637 static void winShmLeaveMutex(void){
3638 sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1
));
3641 static int winShmMutexHeld(void) {
3642 return sqlite3_mutex_held(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1
));
3647 ** Object used to represent a single file opened and mmapped to provide
3648 ** shared memory. When multiple threads all reference the same
3649 ** log-summary, each thread has its own winFile object, but they all
3650 ** point to a single instance of this object. In other words, each
3651 ** log-summary is opened only once per process.
3653 ** winShmMutexHeld() must be true when creating or destroying
3654 ** this object or while reading or writing the following fields:
3659 ** The following fields are read-only after the object is created:
3664 ** Either winShmNode.mutex must be held or winShmNode.nRef==0 and
3665 ** winShmMutexHeld() is true when reading or writing any other field
3666 ** in this structure.
3670 sqlite3_mutex
*mutex
; /* Mutex to access this object */
3671 char *zFilename
; /* Name of the file */
3672 winFile hFile
; /* File handle from winOpen */
3674 int szRegion
; /* Size of shared-memory regions */
3675 int nRegion
; /* Size of array apRegion */
3676 u8 isReadonly
; /* True if read-only */
3677 u8 isUnlocked
; /* True if no DMS lock held */
3680 HANDLE hMap
; /* File handle from CreateFileMapping */
3683 DWORD lastErrno
; /* The Windows errno from the last I/O error */
3685 int nRef
; /* Number of winShm objects pointing to this */
3686 winShm
*pFirst
; /* All winShm objects pointing to this */
3687 winShmNode
*pNext
; /* Next in list of all winShmNode objects */
3688 #if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE)
3689 u8 nextShmId
; /* Next available winShm.id value */
3694 ** A global array of all winShmNode objects.
3696 ** The winShmMutexHeld() must be true while reading or writing this list.
3698 static winShmNode
*winShmNodeList
= 0;
3701 ** Structure used internally by this VFS to record the state of an
3702 ** open shared memory connection.
3704 ** The following fields are initialized when this object is created and
3705 ** are read-only thereafter:
3710 ** All other fields are read/write. The winShm.pShmNode->mutex must be held
3711 ** while accessing any read/write fields.
3714 winShmNode
*pShmNode
; /* The underlying winShmNode object */
3715 winShm
*pNext
; /* Next winShm with the same winShmNode */
3716 u8 hasMutex
; /* True if holding the winShmNode mutex */
3717 u16 sharedMask
; /* Mask of shared locks held */
3718 u16 exclMask
; /* Mask of exclusive locks held */
3719 #if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE)
3720 u8 id
; /* Id of this connection with its winShmNode */
3725 ** Constants used for locking
3727 #define WIN_SHM_BASE ((22+SQLITE_SHM_NLOCK)*4) /* first lock byte */
3728 #define WIN_SHM_DMS (WIN_SHM_BASE+SQLITE_SHM_NLOCK) /* deadman switch */
3731 ** Apply advisory locks for all n bytes beginning at ofst.
3733 #define WINSHM_UNLCK 1
3734 #define WINSHM_RDLCK 2
3735 #define WINSHM_WRLCK 3
3736 static int winShmSystemLock(
3737 winShmNode
*pFile
, /* Apply locks to this open shared-memory segment */
3738 int lockType
, /* WINSHM_UNLCK, WINSHM_RDLCK, or WINSHM_WRLCK */
3739 int ofst
, /* Offset to first byte to be locked/unlocked */
3740 int nByte
/* Number of bytes to lock or unlock */
3742 int rc
= 0; /* Result code form Lock/UnlockFileEx() */
3744 /* Access to the winShmNode object is serialized by the caller */
3745 assert( sqlite3_mutex_held(pFile
->mutex
) || pFile
->nRef
==0 );
3747 OSTRACE(("SHM-LOCK file=%p, lock=%d, offset=%d, size=%d\n",
3748 pFile
->hFile
.h
, lockType
, ofst
, nByte
));
3750 /* Release/Acquire the system-level lock */
3751 if( lockType
==WINSHM_UNLCK
){
3752 rc
= winUnlockFile(&pFile
->hFile
.h
, ofst
, 0, nByte
, 0);
3754 /* Initialize the locking parameters */
3755 DWORD dwFlags
= LOCKFILE_FAIL_IMMEDIATELY
;
3756 if( lockType
== WINSHM_WRLCK
) dwFlags
|= LOCKFILE_EXCLUSIVE_LOCK
;
3757 rc
= winLockFile(&pFile
->hFile
.h
, dwFlags
, ofst
, 0, nByte
, 0);
3763 pFile
->lastErrno
= osGetLastError();
3767 OSTRACE(("SHM-LOCK file=%p, func=%s, errno=%lu, rc=%s\n",
3768 pFile
->hFile
.h
, (lockType
== WINSHM_UNLCK
) ? "winUnlockFile" :
3769 "winLockFile", pFile
->lastErrno
, sqlite3ErrName(rc
)));
3774 /* Forward references to VFS methods */
3775 static int winOpen(sqlite3_vfs
*,const char*,sqlite3_file
*,int,int*);
3776 static int winDelete(sqlite3_vfs
*,const char*,int);
3779 ** Purge the winShmNodeList list of all entries with winShmNode.nRef==0.
3781 ** This is not a VFS shared-memory method; it is a utility function called
3782 ** by VFS shared-memory methods.
3784 static void winShmPurge(sqlite3_vfs
*pVfs
, int deleteFlag
){
3787 assert( winShmMutexHeld() );
3788 OSTRACE(("SHM-PURGE pid=%lu, deleteFlag=%d\n",
3789 osGetCurrentProcessId(), deleteFlag
));
3790 pp
= &winShmNodeList
;
3791 while( (p
= *pp
)!=0 ){
3794 if( p
->mutex
){ sqlite3_mutex_free(p
->mutex
); }
3795 for(i
=0; i
<p
->nRegion
; i
++){
3796 BOOL bRc
= osUnmapViewOfFile(p
->aRegion
[i
].pMap
);
3797 OSTRACE(("SHM-PURGE-UNMAP pid=%lu, region=%d, rc=%s\n",
3798 osGetCurrentProcessId(), i
, bRc
? "ok" : "failed"));
3799 UNUSED_VARIABLE_VALUE(bRc
);
3800 bRc
= osCloseHandle(p
->aRegion
[i
].hMap
);
3801 OSTRACE(("SHM-PURGE-CLOSE pid=%lu, region=%d, rc=%s\n",
3802 osGetCurrentProcessId(), i
, bRc
? "ok" : "failed"));
3803 UNUSED_VARIABLE_VALUE(bRc
);
3805 if( p
->hFile
.h
!=NULL
&& p
->hFile
.h
!=INVALID_HANDLE_VALUE
){
3806 SimulateIOErrorBenign(1);
3807 winClose((sqlite3_file
*)&p
->hFile
);
3808 SimulateIOErrorBenign(0);
3811 SimulateIOErrorBenign(1);
3812 sqlite3BeginBenignMalloc();
3813 winDelete(pVfs
, p
->zFilename
, 0);
3814 sqlite3EndBenignMalloc();
3815 SimulateIOErrorBenign(0);
3818 sqlite3_free(p
->aRegion
);
3827 ** The DMS lock has not yet been taken on shm file pShmNode. Attempt to
3828 ** take it now. Return SQLITE_OK if successful, or an SQLite error
3831 ** If the DMS cannot be locked because this is a readonly_shm=1
3832 ** connection and no other process already holds a lock, return
3833 ** SQLITE_READONLY_CANTINIT and set pShmNode->isUnlocked=1.
3835 static int winLockSharedMemory(winShmNode
*pShmNode
){
3836 int rc
= winShmSystemLock(pShmNode
, WINSHM_WRLCK
, WIN_SHM_DMS
, 1);
3837 if( rc
==SQLITE_OK
){
3838 if( pShmNode
->isReadonly
){
3839 pShmNode
->isUnlocked
= 1;
3840 winShmSystemLock(pShmNode
, WINSHM_UNLCK
, WIN_SHM_DMS
, 1);
3841 return SQLITE_READONLY_CANTINIT
;
3842 }else if( winTruncate((sqlite3_file
*)&pShmNode
->hFile
, 0) ){
3843 winShmSystemLock(pShmNode
, WINSHM_UNLCK
, WIN_SHM_DMS
, 1);
3844 return winLogError(SQLITE_IOERR_SHMOPEN
, osGetLastError(),
3845 "winLockSharedMemory", pShmNode
->zFilename
);
3849 winShmSystemLock(pShmNode
, WINSHM_UNLCK
, WIN_SHM_DMS
, 1);
3850 return winShmSystemLock(pShmNode
, WINSHM_RDLCK
, WIN_SHM_DMS
, 1);
3854 ** Open the shared-memory area associated with database file pDbFd.
3856 ** When opening a new shared-memory file, if no other instances of that
3857 ** file are currently open, in this process or in other processes, then
3858 ** the file must be truncated to zero length or have its header cleared.
3860 static int winOpenSharedMemory(winFile
*pDbFd
){
3861 struct winShm
*p
; /* The connection to be opened */
3862 winShmNode
*pShmNode
= 0; /* The underlying mmapped file */
3863 int rc
= SQLITE_OK
; /* Result code */
3864 int rc2
= SQLITE_ERROR
; /* winOpen result code */
3865 winShmNode
*pNew
; /* Newly allocated winShmNode */
3866 int nName
; /* Size of zName in bytes */
3868 assert( pDbFd
->pShm
==0 ); /* Not previously opened */
3870 /* Allocate space for the new sqlite3_shm object. Also speculatively
3871 ** allocate space for a new winShmNode and filename.
3873 p
= sqlite3MallocZero( sizeof(*p
) );
3874 if( p
==0 ) return SQLITE_IOERR_NOMEM_BKPT
;
3875 nName
= sqlite3Strlen30(pDbFd
->zPath
);
3876 pNew
= sqlite3MallocZero( sizeof(*pShmNode
) + nName
+ 17 );
3879 return SQLITE_IOERR_NOMEM_BKPT
;
3881 pNew
->zFilename
= (char*)&pNew
[1];
3882 sqlite3_snprintf(nName
+15, pNew
->zFilename
, "%s-shm", pDbFd
->zPath
);
3883 sqlite3FileSuffix3(pDbFd
->zPath
, pNew
->zFilename
);
3885 /* Look to see if there is an existing winShmNode that can be used.
3886 ** If no matching winShmNode currently exists, create a new one.
3889 for(pShmNode
= winShmNodeList
; pShmNode
; pShmNode
=pShmNode
->pNext
){
3890 /* TBD need to come up with better match here. Perhaps
3891 ** use FILE_ID_BOTH_DIR_INFO Structure.
3893 if( sqlite3StrICmp(pShmNode
->zFilename
, pNew
->zFilename
)==0 ) break;
3900 ((winFile
*)(&pShmNode
->hFile
))->h
= INVALID_HANDLE_VALUE
;
3901 pShmNode
->pNext
= winShmNodeList
;
3902 winShmNodeList
= pShmNode
;
3904 if( sqlite3GlobalConfig
.bCoreMutex
){
3905 pShmNode
->mutex
= sqlite3_mutex_alloc(SQLITE_MUTEX_FAST
);
3906 if( pShmNode
->mutex
==0 ){
3907 rc
= SQLITE_IOERR_NOMEM_BKPT
;
3912 if( 0==sqlite3_uri_boolean(pDbFd
->zPath
, "readonly_shm", 0) ){
3913 rc2
= winOpen(pDbFd
->pVfs
,
3914 pShmNode
->zFilename
,
3915 (sqlite3_file
*)&pShmNode
->hFile
,
3916 SQLITE_OPEN_WAL
|SQLITE_OPEN_READWRITE
|SQLITE_OPEN_CREATE
,
3919 if( rc2
!=SQLITE_OK
){
3920 rc2
= winOpen(pDbFd
->pVfs
,
3921 pShmNode
->zFilename
,
3922 (sqlite3_file
*)&pShmNode
->hFile
,
3923 SQLITE_OPEN_WAL
|SQLITE_OPEN_READONLY
,
3925 if( rc2
!=SQLITE_OK
){
3926 rc
= winLogError(rc2
, osGetLastError(), "winOpenShm",
3927 pShmNode
->zFilename
);
3930 pShmNode
->isReadonly
= 1;
3933 rc
= winLockSharedMemory(pShmNode
);
3934 if( rc
!=SQLITE_OK
&& rc
!=SQLITE_READONLY_CANTINIT
) goto shm_open_err
;
3937 /* Make the new connection a child of the winShmNode */
3938 p
->pShmNode
= pShmNode
;
3939 #if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE)
3940 p
->id
= pShmNode
->nextShmId
++;
3946 /* The reference count on pShmNode has already been incremented under
3947 ** the cover of the winShmEnterMutex() mutex and the pointer from the
3948 ** new (struct winShm) object to the pShmNode has been set. All that is
3949 ** left to do is to link the new object into the linked list starting
3950 ** at pShmNode->pFirst. This must be done while holding the pShmNode->mutex
3953 sqlite3_mutex_enter(pShmNode
->mutex
);
3954 p
->pNext
= pShmNode
->pFirst
;
3955 pShmNode
->pFirst
= p
;
3956 sqlite3_mutex_leave(pShmNode
->mutex
);
3959 /* Jump here on any error */
3961 winShmSystemLock(pShmNode
, WINSHM_UNLCK
, WIN_SHM_DMS
, 1);
3962 winShmPurge(pDbFd
->pVfs
, 0); /* This call frees pShmNode if required */
3970 ** Close a connection to shared-memory. Delete the underlying
3971 ** storage if deleteFlag is true.
3973 static int winShmUnmap(
3974 sqlite3_file
*fd
, /* Database holding shared memory */
3975 int deleteFlag
/* Delete after closing if true */
3977 winFile
*pDbFd
; /* Database holding shared-memory */
3978 winShm
*p
; /* The connection to be closed */
3979 winShmNode
*pShmNode
; /* The underlying shared-memory file */
3980 winShm
**pp
; /* For looping over sibling connections */
3982 pDbFd
= (winFile
*)fd
;
3984 if( p
==0 ) return SQLITE_OK
;
3985 pShmNode
= p
->pShmNode
;
3987 /* Remove connection p from the set of connections associated
3989 sqlite3_mutex_enter(pShmNode
->mutex
);
3990 for(pp
=&pShmNode
->pFirst
; (*pp
)!=p
; pp
= &(*pp
)->pNext
){}
3993 /* Free the connection p */
3996 sqlite3_mutex_leave(pShmNode
->mutex
);
3998 /* If pShmNode->nRef has reached 0, then close the underlying
3999 ** shared-memory file, too */
4001 assert( pShmNode
->nRef
>0 );
4003 if( pShmNode
->nRef
==0 ){
4004 winShmPurge(pDbFd
->pVfs
, deleteFlag
);
4012 ** Change the lock state for a shared-memory segment.
4014 static int winShmLock(
4015 sqlite3_file
*fd
, /* Database file holding the shared memory */
4016 int ofst
, /* First lock to acquire or release */
4017 int n
, /* Number of locks to acquire or release */
4018 int flags
/* What to do with the lock */
4020 winFile
*pDbFd
= (winFile
*)fd
; /* Connection holding shared memory */
4021 winShm
*p
= pDbFd
->pShm
; /* The shared memory being locked */
4022 winShm
*pX
; /* For looping over all siblings */
4023 winShmNode
*pShmNode
= p
->pShmNode
;
4024 int rc
= SQLITE_OK
; /* Result code */
4025 u16 mask
; /* Mask of locks to take or release */
4027 assert( ofst
>=0 && ofst
+n
<=SQLITE_SHM_NLOCK
);
4029 assert( flags
==(SQLITE_SHM_LOCK
| SQLITE_SHM_SHARED
)
4030 || flags
==(SQLITE_SHM_LOCK
| SQLITE_SHM_EXCLUSIVE
)
4031 || flags
==(SQLITE_SHM_UNLOCK
| SQLITE_SHM_SHARED
)
4032 || flags
==(SQLITE_SHM_UNLOCK
| SQLITE_SHM_EXCLUSIVE
) );
4033 assert( n
==1 || (flags
& SQLITE_SHM_EXCLUSIVE
)!=0 );
4035 mask
= (u16
)((1U<<(ofst
+n
)) - (1U<<ofst
));
4036 assert( n
>1 || mask
==(1<<ofst
) );
4037 sqlite3_mutex_enter(pShmNode
->mutex
);
4038 if( flags
& SQLITE_SHM_UNLOCK
){
4039 u16 allMask
= 0; /* Mask of locks held by siblings */
4041 /* See if any siblings hold this same lock */
4042 for(pX
=pShmNode
->pFirst
; pX
; pX
=pX
->pNext
){
4043 if( pX
==p
) continue;
4044 assert( (pX
->exclMask
& (p
->exclMask
|p
->sharedMask
))==0 );
4045 allMask
|= pX
->sharedMask
;
4048 /* Unlock the system-level locks */
4049 if( (mask
& allMask
)==0 ){
4050 rc
= winShmSystemLock(pShmNode
, WINSHM_UNLCK
, ofst
+WIN_SHM_BASE
, n
);
4055 /* Undo the local locks */
4056 if( rc
==SQLITE_OK
){
4057 p
->exclMask
&= ~mask
;
4058 p
->sharedMask
&= ~mask
;
4060 }else if( flags
& SQLITE_SHM_SHARED
){
4061 u16 allShared
= 0; /* Union of locks held by connections other than "p" */
4063 /* Find out which shared locks are already held by sibling connections.
4064 ** If any sibling already holds an exclusive lock, go ahead and return
4067 for(pX
=pShmNode
->pFirst
; pX
; pX
=pX
->pNext
){
4068 if( (pX
->exclMask
& mask
)!=0 ){
4072 allShared
|= pX
->sharedMask
;
4075 /* Get shared locks at the system level, if necessary */
4076 if( rc
==SQLITE_OK
){
4077 if( (allShared
& mask
)==0 ){
4078 rc
= winShmSystemLock(pShmNode
, WINSHM_RDLCK
, ofst
+WIN_SHM_BASE
, n
);
4084 /* Get the local shared locks */
4085 if( rc
==SQLITE_OK
){
4086 p
->sharedMask
|= mask
;
4089 /* Make sure no sibling connections hold locks that will block this
4090 ** lock. If any do, return SQLITE_BUSY right away.
4092 for(pX
=pShmNode
->pFirst
; pX
; pX
=pX
->pNext
){
4093 if( (pX
->exclMask
& mask
)!=0 || (pX
->sharedMask
& mask
)!=0 ){
4099 /* Get the exclusive locks at the system level. Then if successful
4100 ** also mark the local connection as being locked.
4102 if( rc
==SQLITE_OK
){
4103 rc
= winShmSystemLock(pShmNode
, WINSHM_WRLCK
, ofst
+WIN_SHM_BASE
, n
);
4104 if( rc
==SQLITE_OK
){
4105 assert( (p
->sharedMask
& mask
)==0 );
4106 p
->exclMask
|= mask
;
4110 sqlite3_mutex_leave(pShmNode
->mutex
);
4111 OSTRACE(("SHM-LOCK pid=%lu, id=%d, sharedMask=%03x, exclMask=%03x, rc=%s\n",
4112 osGetCurrentProcessId(), p
->id
, p
->sharedMask
, p
->exclMask
,
4113 sqlite3ErrName(rc
)));
4118 ** Implement a memory barrier or memory fence on shared memory.
4120 ** All loads and stores begun before the barrier must complete before
4121 ** any load or store begun after the barrier.
4123 static void winShmBarrier(
4124 sqlite3_file
*fd
/* Database holding the shared memory */
4126 UNUSED_PARAMETER(fd
);
4127 sqlite3MemoryBarrier(); /* compiler-defined memory barrier */
4128 winShmEnterMutex(); /* Also mutex, for redundancy */
4133 ** This function is called to obtain a pointer to region iRegion of the
4134 ** shared-memory associated with the database file fd. Shared-memory regions
4135 ** are numbered starting from zero. Each shared-memory region is szRegion
4138 ** If an error occurs, an error code is returned and *pp is set to NULL.
4140 ** Otherwise, if the isWrite parameter is 0 and the requested shared-memory
4141 ** region has not been allocated (by any client, including one running in a
4142 ** separate process), then *pp is set to NULL and SQLITE_OK returned. If
4143 ** isWrite is non-zero and the requested shared-memory region has not yet
4144 ** been allocated, it is allocated by this function.
4146 ** If the shared-memory region has already been allocated or is allocated by
4147 ** this call as described above, then it is mapped into this processes
4148 ** address space (if it is not already), *pp is set to point to the mapped
4149 ** memory and SQLITE_OK returned.
4151 static int winShmMap(
4152 sqlite3_file
*fd
, /* Handle open on database file */
4153 int iRegion
, /* Region to retrieve */
4154 int szRegion
, /* Size of regions */
4155 int isWrite
, /* True to extend file if necessary */
4156 void volatile **pp
/* OUT: Mapped memory */
4158 winFile
*pDbFd
= (winFile
*)fd
;
4159 winShm
*pShm
= pDbFd
->pShm
;
4160 winShmNode
*pShmNode
;
4161 DWORD protect
= PAGE_READWRITE
;
4162 DWORD flags
= FILE_MAP_WRITE
| FILE_MAP_READ
;
4166 rc
= winOpenSharedMemory(pDbFd
);
4167 if( rc
!=SQLITE_OK
) return rc
;
4170 pShmNode
= pShm
->pShmNode
;
4172 sqlite3_mutex_enter(pShmNode
->mutex
);
4173 if( pShmNode
->isUnlocked
){
4174 rc
= winLockSharedMemory(pShmNode
);
4175 if( rc
!=SQLITE_OK
) goto shmpage_out
;
4176 pShmNode
->isUnlocked
= 0;
4178 assert( szRegion
==pShmNode
->szRegion
|| pShmNode
->nRegion
==0 );
4180 if( pShmNode
->nRegion
<=iRegion
){
4181 struct ShmRegion
*apNew
; /* New aRegion[] array */
4182 int nByte
= (iRegion
+1)*szRegion
; /* Minimum required file size */
4183 sqlite3_int64 sz
; /* Current size of wal-index file */
4185 pShmNode
->szRegion
= szRegion
;
4187 /* The requested region is not mapped into this processes address space.
4188 ** Check to see if it has been allocated (i.e. if the wal-index file is
4189 ** large enough to contain the requested region).
4191 rc
= winFileSize((sqlite3_file
*)&pShmNode
->hFile
, &sz
);
4192 if( rc
!=SQLITE_OK
){
4193 rc
= winLogError(SQLITE_IOERR_SHMSIZE
, osGetLastError(),
4194 "winShmMap1", pDbFd
->zPath
);
4199 /* The requested memory region does not exist. If isWrite is set to
4200 ** zero, exit early. *pp will be set to NULL and SQLITE_OK returned.
4202 ** Alternatively, if isWrite is non-zero, use ftruncate() to allocate
4203 ** the requested memory region.
4205 if( !isWrite
) goto shmpage_out
;
4206 rc
= winTruncate((sqlite3_file
*)&pShmNode
->hFile
, nByte
);
4207 if( rc
!=SQLITE_OK
){
4208 rc
= winLogError(SQLITE_IOERR_SHMSIZE
, osGetLastError(),
4209 "winShmMap2", pDbFd
->zPath
);
4214 /* Map the requested memory region into this processes address space. */
4215 apNew
= (struct ShmRegion
*)sqlite3_realloc64(
4216 pShmNode
->aRegion
, (iRegion
+1)*sizeof(apNew
[0])
4219 rc
= SQLITE_IOERR_NOMEM_BKPT
;
4222 pShmNode
->aRegion
= apNew
;
4224 if( pShmNode
->isReadonly
){
4225 protect
= PAGE_READONLY
;
4226 flags
= FILE_MAP_READ
;
4229 while( pShmNode
->nRegion
<=iRegion
){
4230 HANDLE hMap
= NULL
; /* file-mapping handle */
4231 void *pMap
= 0; /* Mapped memory region */
4234 hMap
= osCreateFileMappingFromApp(pShmNode
->hFile
.h
,
4235 NULL
, protect
, nByte
, NULL
4237 #elif defined(SQLITE_WIN32_HAS_WIDE)
4238 hMap
= osCreateFileMappingW(pShmNode
->hFile
.h
,
4239 NULL
, protect
, 0, nByte
, NULL
4241 #elif defined(SQLITE_WIN32_HAS_ANSI) && SQLITE_WIN32_CREATEFILEMAPPINGA
4242 hMap
= osCreateFileMappingA(pShmNode
->hFile
.h
,
4243 NULL
, protect
, 0, nByte
, NULL
4246 OSTRACE(("SHM-MAP-CREATE pid=%lu, region=%d, size=%d, rc=%s\n",
4247 osGetCurrentProcessId(), pShmNode
->nRegion
, nByte
,
4248 hMap
? "ok" : "failed"));
4250 int iOffset
= pShmNode
->nRegion
*szRegion
;
4251 int iOffsetShift
= iOffset
% winSysInfo
.dwAllocationGranularity
;
4253 pMap
= osMapViewOfFileFromApp(hMap
, flags
,
4254 iOffset
- iOffsetShift
, szRegion
+ iOffsetShift
4257 pMap
= osMapViewOfFile(hMap
, flags
,
4258 0, iOffset
- iOffsetShift
, szRegion
+ iOffsetShift
4261 OSTRACE(("SHM-MAP-MAP pid=%lu, region=%d, offset=%d, size=%d, rc=%s\n",
4262 osGetCurrentProcessId(), pShmNode
->nRegion
, iOffset
,
4263 szRegion
, pMap
? "ok" : "failed"));
4266 pShmNode
->lastErrno
= osGetLastError();
4267 rc
= winLogError(SQLITE_IOERR_SHMMAP
, pShmNode
->lastErrno
,
4268 "winShmMap3", pDbFd
->zPath
);
4269 if( hMap
) osCloseHandle(hMap
);
4273 pShmNode
->aRegion
[pShmNode
->nRegion
].pMap
= pMap
;
4274 pShmNode
->aRegion
[pShmNode
->nRegion
].hMap
= hMap
;
4275 pShmNode
->nRegion
++;
4280 if( pShmNode
->nRegion
>iRegion
){
4281 int iOffset
= iRegion
*szRegion
;
4282 int iOffsetShift
= iOffset
% winSysInfo
.dwAllocationGranularity
;
4283 char *p
= (char *)pShmNode
->aRegion
[iRegion
].pMap
;
4284 *pp
= (void *)&p
[iOffsetShift
];
4288 if( pShmNode
->isReadonly
&& rc
==SQLITE_OK
) rc
= SQLITE_READONLY
;
4289 sqlite3_mutex_leave(pShmNode
->mutex
);
4294 # define winShmMap 0
4295 # define winShmLock 0
4296 # define winShmBarrier 0
4297 # define winShmUnmap 0
4298 #endif /* #ifndef SQLITE_OMIT_WAL */
4301 ** Cleans up the mapped region of the specified file, if any.
4303 #if SQLITE_MAX_MMAP_SIZE>0
4304 static int winUnmapfile(winFile
*pFile
){
4306 OSTRACE(("UNMAP-FILE pid=%lu, pFile=%p, hMap=%p, pMapRegion=%p, "
4307 "mmapSize=%lld, mmapSizeActual=%lld, mmapSizeMax=%lld\n",
4308 osGetCurrentProcessId(), pFile
, pFile
->hMap
, pFile
->pMapRegion
,
4309 pFile
->mmapSize
, pFile
->mmapSizeActual
, pFile
->mmapSizeMax
));
4310 if( pFile
->pMapRegion
){
4311 if( !osUnmapViewOfFile(pFile
->pMapRegion
) ){
4312 pFile
->lastErrno
= osGetLastError();
4313 OSTRACE(("UNMAP-FILE pid=%lu, pFile=%p, pMapRegion=%p, "
4314 "rc=SQLITE_IOERR_MMAP\n", osGetCurrentProcessId(), pFile
,
4315 pFile
->pMapRegion
));
4316 return winLogError(SQLITE_IOERR_MMAP
, pFile
->lastErrno
,
4317 "winUnmapfile1", pFile
->zPath
);
4319 pFile
->pMapRegion
= 0;
4320 pFile
->mmapSize
= 0;
4321 pFile
->mmapSizeActual
= 0;
4323 if( pFile
->hMap
!=NULL
){
4324 if( !osCloseHandle(pFile
->hMap
) ){
4325 pFile
->lastErrno
= osGetLastError();
4326 OSTRACE(("UNMAP-FILE pid=%lu, pFile=%p, hMap=%p, rc=SQLITE_IOERR_MMAP\n",
4327 osGetCurrentProcessId(), pFile
, pFile
->hMap
));
4328 return winLogError(SQLITE_IOERR_MMAP
, pFile
->lastErrno
,
4329 "winUnmapfile2", pFile
->zPath
);
4333 OSTRACE(("UNMAP-FILE pid=%lu, pFile=%p, rc=SQLITE_OK\n",
4334 osGetCurrentProcessId(), pFile
));
4339 ** Memory map or remap the file opened by file-descriptor pFd (if the file
4340 ** is already mapped, the existing mapping is replaced by the new). Or, if
4341 ** there already exists a mapping for this file, and there are still
4342 ** outstanding xFetch() references to it, this function is a no-op.
4344 ** If parameter nByte is non-negative, then it is the requested size of
4345 ** the mapping to create. Otherwise, if nByte is less than zero, then the
4346 ** requested size is the size of the file on disk. The actual size of the
4347 ** created mapping is either the requested size or the value configured
4348 ** using SQLITE_FCNTL_MMAP_SIZE, whichever is smaller.
4350 ** SQLITE_OK is returned if no error occurs (even if the mapping is not
4351 ** recreated as a result of outstanding references) or an SQLite error
4354 static int winMapfile(winFile
*pFd
, sqlite3_int64 nByte
){
4355 sqlite3_int64 nMap
= nByte
;
4358 assert( nMap
>=0 || pFd
->nFetchOut
==0 );
4359 OSTRACE(("MAP-FILE pid=%lu, pFile=%p, size=%lld\n",
4360 osGetCurrentProcessId(), pFd
, nByte
));
4362 if( pFd
->nFetchOut
>0 ) return SQLITE_OK
;
4365 rc
= winFileSize((sqlite3_file
*)pFd
, &nMap
);
4367 OSTRACE(("MAP-FILE pid=%lu, pFile=%p, rc=SQLITE_IOERR_FSTAT\n",
4368 osGetCurrentProcessId(), pFd
));
4369 return SQLITE_IOERR_FSTAT
;
4372 if( nMap
>pFd
->mmapSizeMax
){
4373 nMap
= pFd
->mmapSizeMax
;
4375 nMap
&= ~(sqlite3_int64
)(winSysInfo
.dwPageSize
- 1);
4377 if( nMap
==0 && pFd
->mmapSize
>0 ){
4380 if( nMap
!=pFd
->mmapSize
){
4382 DWORD protect
= PAGE_READONLY
;
4383 DWORD flags
= FILE_MAP_READ
;
4386 #ifdef SQLITE_MMAP_READWRITE
4387 if( (pFd
->ctrlFlags
& WINFILE_RDONLY
)==0 ){
4388 protect
= PAGE_READWRITE
;
4389 flags
|= FILE_MAP_WRITE
;
4393 pFd
->hMap
= osCreateFileMappingFromApp(pFd
->h
, NULL
, protect
, nMap
, NULL
);
4394 #elif defined(SQLITE_WIN32_HAS_WIDE)
4395 pFd
->hMap
= osCreateFileMappingW(pFd
->h
, NULL
, protect
,
4396 (DWORD
)((nMap
>>32) & 0xffffffff),
4397 (DWORD
)(nMap
& 0xffffffff), NULL
);
4398 #elif defined(SQLITE_WIN32_HAS_ANSI) && SQLITE_WIN32_CREATEFILEMAPPINGA
4399 pFd
->hMap
= osCreateFileMappingA(pFd
->h
, NULL
, protect
,
4400 (DWORD
)((nMap
>>32) & 0xffffffff),
4401 (DWORD
)(nMap
& 0xffffffff), NULL
);
4403 if( pFd
->hMap
==NULL
){
4404 pFd
->lastErrno
= osGetLastError();
4405 rc
= winLogError(SQLITE_IOERR_MMAP
, pFd
->lastErrno
,
4406 "winMapfile1", pFd
->zPath
);
4407 /* Log the error, but continue normal operation using xRead/xWrite */
4408 OSTRACE(("MAP-FILE-CREATE pid=%lu, pFile=%p, rc=%s\n",
4409 osGetCurrentProcessId(), pFd
, sqlite3ErrName(rc
)));
4412 assert( (nMap
% winSysInfo
.dwPageSize
)==0 );
4413 assert( sizeof(SIZE_T
)==sizeof(sqlite3_int64
) || nMap
<=0xffffffff );
4415 pNew
= osMapViewOfFileFromApp(pFd
->hMap
, flags
, 0, (SIZE_T
)nMap
);
4417 pNew
= osMapViewOfFile(pFd
->hMap
, flags
, 0, 0, (SIZE_T
)nMap
);
4420 osCloseHandle(pFd
->hMap
);
4422 pFd
->lastErrno
= osGetLastError();
4423 rc
= winLogError(SQLITE_IOERR_MMAP
, pFd
->lastErrno
,
4424 "winMapfile2", pFd
->zPath
);
4425 /* Log the error, but continue normal operation using xRead/xWrite */
4426 OSTRACE(("MAP-FILE-MAP pid=%lu, pFile=%p, rc=%s\n",
4427 osGetCurrentProcessId(), pFd
, sqlite3ErrName(rc
)));
4430 pFd
->pMapRegion
= pNew
;
4431 pFd
->mmapSize
= nMap
;
4432 pFd
->mmapSizeActual
= nMap
;
4435 OSTRACE(("MAP-FILE pid=%lu, pFile=%p, rc=SQLITE_OK\n",
4436 osGetCurrentProcessId(), pFd
));
4439 #endif /* SQLITE_MAX_MMAP_SIZE>0 */
4442 ** If possible, return a pointer to a mapping of file fd starting at offset
4443 ** iOff. The mapping must be valid for at least nAmt bytes.
4445 ** If such a pointer can be obtained, store it in *pp and return SQLITE_OK.
4446 ** Or, if one cannot but no error occurs, set *pp to 0 and return SQLITE_OK.
4447 ** Finally, if an error does occur, return an SQLite error code. The final
4448 ** value of *pp is undefined in this case.
4450 ** If this function does return a pointer, the caller must eventually
4451 ** release the reference by calling winUnfetch().
4453 static int winFetch(sqlite3_file
*fd
, i64 iOff
, int nAmt
, void **pp
){
4454 #if SQLITE_MAX_MMAP_SIZE>0
4455 winFile
*pFd
= (winFile
*)fd
; /* The underlying database file */
4459 OSTRACE(("FETCH pid=%lu, pFile=%p, offset=%lld, amount=%d, pp=%p\n",
4460 osGetCurrentProcessId(), fd
, iOff
, nAmt
, pp
));
4462 #if SQLITE_MAX_MMAP_SIZE>0
4463 if( pFd
->mmapSizeMax
>0 ){
4464 if( pFd
->pMapRegion
==0 ){
4465 int rc
= winMapfile(pFd
, -1);
4466 if( rc
!=SQLITE_OK
){
4467 OSTRACE(("FETCH pid=%lu, pFile=%p, rc=%s\n",
4468 osGetCurrentProcessId(), pFd
, sqlite3ErrName(rc
)));
4472 if( pFd
->mmapSize
>= iOff
+nAmt
){
4473 *pp
= &((u8
*)pFd
->pMapRegion
)[iOff
];
4479 OSTRACE(("FETCH pid=%lu, pFile=%p, pp=%p, *pp=%p, rc=SQLITE_OK\n",
4480 osGetCurrentProcessId(), fd
, pp
, *pp
));
4485 ** If the third argument is non-NULL, then this function releases a
4486 ** reference obtained by an earlier call to winFetch(). The second
4487 ** argument passed to this function must be the same as the corresponding
4488 ** argument that was passed to the winFetch() invocation.
4490 ** Or, if the third argument is NULL, then this function is being called
4491 ** to inform the VFS layer that, according to POSIX, any existing mapping
4492 ** may now be invalid and should be unmapped.
4494 static int winUnfetch(sqlite3_file
*fd
, i64 iOff
, void *p
){
4495 #if SQLITE_MAX_MMAP_SIZE>0
4496 winFile
*pFd
= (winFile
*)fd
; /* The underlying database file */
4498 /* If p==0 (unmap the entire file) then there must be no outstanding
4499 ** xFetch references. Or, if p!=0 (meaning it is an xFetch reference),
4500 ** then there must be at least one outstanding. */
4501 assert( (p
==0)==(pFd
->nFetchOut
==0) );
4503 /* If p!=0, it must match the iOff value. */
4504 assert( p
==0 || p
==&((u8
*)pFd
->pMapRegion
)[iOff
] );
4506 OSTRACE(("UNFETCH pid=%lu, pFile=%p, offset=%lld, p=%p\n",
4507 osGetCurrentProcessId(), pFd
, iOff
, p
));
4512 /* FIXME: If Windows truly always prevents truncating or deleting a
4513 ** file while a mapping is held, then the following winUnmapfile() call
4514 ** is unnecessary can be omitted - potentially improving
4519 assert( pFd
->nFetchOut
>=0 );
4522 OSTRACE(("UNFETCH pid=%lu, pFile=%p, rc=SQLITE_OK\n",
4523 osGetCurrentProcessId(), fd
));
4528 ** Here ends the implementation of all sqlite3_file methods.
4530 ********************** End sqlite3_file Methods *******************************
4531 ******************************************************************************/
4534 ** This vector defines all the methods that can operate on an
4535 ** sqlite3_file for win32.
4537 static const sqlite3_io_methods winIoMethod
= {
4539 winClose
, /* xClose */
4540 winRead
, /* xRead */
4541 winWrite
, /* xWrite */
4542 winTruncate
, /* xTruncate */
4543 winSync
, /* xSync */
4544 winFileSize
, /* xFileSize */
4545 winLock
, /* xLock */
4546 winUnlock
, /* xUnlock */
4547 winCheckReservedLock
, /* xCheckReservedLock */
4548 winFileControl
, /* xFileControl */
4549 winSectorSize
, /* xSectorSize */
4550 winDeviceCharacteristics
, /* xDeviceCharacteristics */
4551 winShmMap
, /* xShmMap */
4552 winShmLock
, /* xShmLock */
4553 winShmBarrier
, /* xShmBarrier */
4554 winShmUnmap
, /* xShmUnmap */
4555 winFetch
, /* xFetch */
4556 winUnfetch
/* xUnfetch */
4560 ** This vector defines all the methods that can operate on an
4561 ** sqlite3_file for win32 without performing any locking.
4563 static const sqlite3_io_methods winIoNolockMethod
= {
4565 winClose
, /* xClose */
4566 winRead
, /* xRead */
4567 winWrite
, /* xWrite */
4568 winTruncate
, /* xTruncate */
4569 winSync
, /* xSync */
4570 winFileSize
, /* xFileSize */
4571 winNolockLock
, /* xLock */
4572 winNolockUnlock
, /* xUnlock */
4573 winNolockCheckReservedLock
, /* xCheckReservedLock */
4574 winFileControl
, /* xFileControl */
4575 winSectorSize
, /* xSectorSize */
4576 winDeviceCharacteristics
, /* xDeviceCharacteristics */
4577 winShmMap
, /* xShmMap */
4578 winShmLock
, /* xShmLock */
4579 winShmBarrier
, /* xShmBarrier */
4580 winShmUnmap
, /* xShmUnmap */
4581 winFetch
, /* xFetch */
4582 winUnfetch
/* xUnfetch */
4585 static winVfsAppData winAppData
= {
4586 &winIoMethod
, /* pMethod */
4591 static winVfsAppData winNolockAppData
= {
4592 &winIoNolockMethod
, /* pMethod */
4597 /****************************************************************************
4598 **************************** sqlite3_vfs methods ****************************
4600 ** This division contains the implementation of methods on the
4601 ** sqlite3_vfs object.
4604 #if defined(__CYGWIN__)
4606 ** Convert a filename from whatever the underlying operating system
4607 ** supports for filenames into UTF-8. Space to hold the result is
4608 ** obtained from malloc and must be freed by the calling function.
4610 static char *winConvertToUtf8Filename(const void *zFilename
){
4611 char *zConverted
= 0;
4613 zConverted
= winUnicodeToUtf8(zFilename
);
4615 #ifdef SQLITE_WIN32_HAS_ANSI
4617 zConverted
= winMbcsToUtf8(zFilename
, osAreFileApisANSI());
4620 /* caller will handle out of memory */
4626 ** Convert a UTF-8 filename into whatever form the underlying
4627 ** operating system wants filenames in. Space to hold the result
4628 ** is obtained from malloc and must be freed by the calling
4631 static void *winConvertFromUtf8Filename(const char *zFilename
){
4632 void *zConverted
= 0;
4634 zConverted
= winUtf8ToUnicode(zFilename
);
4636 #ifdef SQLITE_WIN32_HAS_ANSI
4638 zConverted
= winUtf8ToMbcs(zFilename
, osAreFileApisANSI());
4641 /* caller will handle out of memory */
4646 ** This function returns non-zero if the specified UTF-8 string buffer
4647 ** ends with a directory separator character or one was successfully
4650 static int winMakeEndInDirSep(int nBuf
, char *zBuf
){
4652 int nLen
= sqlite3Strlen30(zBuf
);
4654 if( winIsDirSep(zBuf
[nLen
-1]) ){
4656 }else if( nLen
+1<nBuf
){
4657 zBuf
[nLen
] = winGetDirSep();
4658 zBuf
[nLen
+1] = '\0';
4667 ** Create a temporary file name and store the resulting pointer into pzBuf.
4668 ** The pointer returned in pzBuf must be freed via sqlite3_free().
4670 static int winGetTempname(sqlite3_vfs
*pVfs
, char **pzBuf
){
4671 static char zChars
[] =
4672 "abcdefghijklmnopqrstuvwxyz"
4673 "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
4676 int nPre
= sqlite3Strlen30(SQLITE_TEMP_FILE_PREFIX
);
4677 int nMax
, nBuf
, nDir
, nLen
;
4680 /* It's odd to simulate an io-error here, but really this is just
4681 ** using the io-error infrastructure to test that SQLite handles this
4682 ** function failing.
4684 SimulateIOError( return SQLITE_IOERR
);
4686 /* Allocate a temporary buffer to store the fully qualified file
4687 ** name for the temporary file. If this fails, we cannot continue.
4689 nMax
= pVfs
->mxPathname
; nBuf
= nMax
+ 2;
4690 zBuf
= sqlite3MallocZero( nBuf
);
4692 OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
4693 return SQLITE_IOERR_NOMEM_BKPT
;
4696 /* Figure out the effective temporary directory. First, check if one
4697 ** has been explicitly set by the application; otherwise, use the one
4698 ** configured by the operating system.
4700 nDir
= nMax
- (nPre
+ 15);
4702 if( sqlite3_temp_directory
){
4703 int nDirLen
= sqlite3Strlen30(sqlite3_temp_directory
);
4705 if( !winIsDirSep(sqlite3_temp_directory
[nDirLen
-1]) ){
4710 OSTRACE(("TEMP-FILENAME rc=SQLITE_ERROR\n"));
4711 return winLogError(SQLITE_ERROR
, 0, "winGetTempname1", 0);
4713 sqlite3_snprintf(nMax
, zBuf
, "%s", sqlite3_temp_directory
);
4716 #if defined(__CYGWIN__)
4718 static const char *azDirs
[] = {
4719 0, /* getenv("SQLITE_TMPDIR") */
4720 0, /* getenv("TMPDIR") */
4721 0, /* getenv("TMP") */
4722 0, /* getenv("TEMP") */
4723 0, /* getenv("USERPROFILE") */
4728 0 /* List terminator */
4731 const char *zDir
= 0;
4733 if( !azDirs
[0] ) azDirs
[0] = getenv("SQLITE_TMPDIR");
4734 if( !azDirs
[1] ) azDirs
[1] = getenv("TMPDIR");
4735 if( !azDirs
[2] ) azDirs
[2] = getenv("TMP");
4736 if( !azDirs
[3] ) azDirs
[3] = getenv("TEMP");
4737 if( !azDirs
[4] ) azDirs
[4] = getenv("USERPROFILE");
4738 for(i
=0; i
<sizeof(azDirs
)/sizeof(azDirs
[0]); zDir
=azDirs
[i
++]){
4740 if( zDir
==0 ) continue;
4741 /* If the path starts with a drive letter followed by the colon
4742 ** character, assume it is already a native Win32 path; otherwise,
4743 ** it must be converted to a native Win32 path via the Cygwin API
4744 ** prior to using it.
4746 if( winIsDriveLetterAndColon(zDir
) ){
4747 zConverted
= winConvertFromUtf8Filename(zDir
);
4750 OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
4751 return SQLITE_IOERR_NOMEM_BKPT
;
4753 if( winIsDir(zConverted
) ){
4754 sqlite3_snprintf(nMax
, zBuf
, "%s", zDir
);
4755 sqlite3_free(zConverted
);
4758 sqlite3_free(zConverted
);
4760 zConverted
= sqlite3MallocZero( nMax
+1 );
4763 OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
4764 return SQLITE_IOERR_NOMEM_BKPT
;
4766 if( cygwin_conv_path(
4767 osIsNT() ? CCP_POSIX_TO_WIN_W
: CCP_POSIX_TO_WIN_A
, zDir
,
4768 zConverted
, nMax
+1)<0 ){
4769 sqlite3_free(zConverted
);
4771 OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_CONVPATH\n"));
4772 return winLogError(SQLITE_IOERR_CONVPATH
, (DWORD
)errno
,
4773 "winGetTempname2", zDir
);
4775 if( winIsDir(zConverted
) ){
4776 /* At this point, we know the candidate directory exists and should
4777 ** be used. However, we may need to convert the string containing
4778 ** its name into UTF-8 (i.e. if it is UTF-16 right now).
4780 char *zUtf8
= winConvertToUtf8Filename(zConverted
);
4782 sqlite3_free(zConverted
);
4784 OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
4785 return SQLITE_IOERR_NOMEM_BKPT
;
4787 sqlite3_snprintf(nMax
, zBuf
, "%s", zUtf8
);
4788 sqlite3_free(zUtf8
);
4789 sqlite3_free(zConverted
);
4792 sqlite3_free(zConverted
);
4796 #elif !SQLITE_OS_WINRT && !defined(__CYGWIN__)
4797 else if( osIsNT() ){
4799 LPWSTR zWidePath
= sqlite3MallocZero( nMax
*sizeof(WCHAR
) );
4802 OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
4803 return SQLITE_IOERR_NOMEM_BKPT
;
4805 if( osGetTempPathW(nMax
, zWidePath
)==0 ){
4806 sqlite3_free(zWidePath
);
4808 OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_GETTEMPPATH\n"));
4809 return winLogError(SQLITE_IOERR_GETTEMPPATH
, osGetLastError(),
4810 "winGetTempname2", 0);
4812 zMulti
= winUnicodeToUtf8(zWidePath
);
4814 sqlite3_snprintf(nMax
, zBuf
, "%s", zMulti
);
4815 sqlite3_free(zMulti
);
4816 sqlite3_free(zWidePath
);
4818 sqlite3_free(zWidePath
);
4820 OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
4821 return SQLITE_IOERR_NOMEM_BKPT
;
4824 #ifdef SQLITE_WIN32_HAS_ANSI
4827 char *zMbcsPath
= sqlite3MallocZero( nMax
);
4830 OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
4831 return SQLITE_IOERR_NOMEM_BKPT
;
4833 if( osGetTempPathA(nMax
, zMbcsPath
)==0 ){
4835 OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_GETTEMPPATH\n"));
4836 return winLogError(SQLITE_IOERR_GETTEMPPATH
, osGetLastError(),
4837 "winGetTempname3", 0);
4839 zUtf8
= winMbcsToUtf8(zMbcsPath
, osAreFileApisANSI());
4841 sqlite3_snprintf(nMax
, zBuf
, "%s", zUtf8
);
4842 sqlite3_free(zUtf8
);
4845 OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
4846 return SQLITE_IOERR_NOMEM_BKPT
;
4849 #endif /* SQLITE_WIN32_HAS_ANSI */
4850 #endif /* !SQLITE_OS_WINRT */
4853 ** Check to make sure the temporary directory ends with an appropriate
4854 ** separator. If it does not and there is not enough space left to add
4857 if( !winMakeEndInDirSep(nDir
+1, zBuf
) ){
4859 OSTRACE(("TEMP-FILENAME rc=SQLITE_ERROR\n"));
4860 return winLogError(SQLITE_ERROR
, 0, "winGetTempname4", 0);
4864 ** Check that the output buffer is large enough for the temporary file
4865 ** name in the following format:
4867 ** "<temporary_directory>/etilqs_XXXXXXXXXXXXXXX\0\0"
4869 ** If not, return SQLITE_ERROR. The number 17 is used here in order to
4870 ** account for the space used by the 15 character random suffix and the
4871 ** two trailing NUL characters. The final directory separator character
4872 ** has already added if it was not already present.
4874 nLen
= sqlite3Strlen30(zBuf
);
4875 if( (nLen
+ nPre
+ 17) > nBuf
){
4877 OSTRACE(("TEMP-FILENAME rc=SQLITE_ERROR\n"));
4878 return winLogError(SQLITE_ERROR
, 0, "winGetTempname5", 0);
4881 sqlite3_snprintf(nBuf
-16-nLen
, zBuf
+nLen
, SQLITE_TEMP_FILE_PREFIX
);
4883 j
= sqlite3Strlen30(zBuf
);
4884 sqlite3_randomness(15, &zBuf
[j
]);
4885 for(i
=0; i
<15; i
++, j
++){
4886 zBuf
[j
] = (char)zChars
[ ((unsigned char)zBuf
[j
])%(sizeof(zChars
)-1) ];
4892 OSTRACE(("TEMP-FILENAME name=%s, rc=SQLITE_OK\n", zBuf
));
4897 ** Return TRUE if the named file is really a directory. Return false if
4898 ** it is something other than a directory, or if there is any kind of memory
4899 ** allocation failure.
4901 static int winIsDir(const void *zConverted
){
4908 WIN32_FILE_ATTRIBUTE_DATA sAttrData
;
4909 memset(&sAttrData
, 0, sizeof(sAttrData
));
4910 while( !(rc
= osGetFileAttributesExW((LPCWSTR
)zConverted
,
4911 GetFileExInfoStandard
,
4912 &sAttrData
)) && winRetryIoerr(&cnt
, &lastErrno
) ){}
4914 return 0; /* Invalid name? */
4916 attr
= sAttrData
.dwFileAttributes
;
4917 #if SQLITE_OS_WINCE==0
4919 attr
= osGetFileAttributesA((char*)zConverted
);
4922 return (attr
!=INVALID_FILE_ATTRIBUTES
) && (attr
&FILE_ATTRIBUTE_DIRECTORY
);
4925 /* forward reference */
4926 static int winAccess(
4927 sqlite3_vfs
*pVfs
, /* Not used on win32 */
4928 const char *zFilename
, /* Name of file to check */
4929 int flags
, /* Type of test to make on this file */
4930 int *pResOut
/* OUT: Result */
4937 sqlite3_vfs
*pVfs
, /* Used to get maximum path length and AppData */
4938 const char *zName
, /* Name of the file (UTF-8) */
4939 sqlite3_file
*id
, /* Write the SQLite file handle here */
4940 int flags
, /* Open mode flags */
4941 int *pOutFlags
/* Status return flags */
4944 DWORD lastErrno
= 0;
4945 DWORD dwDesiredAccess
;
4947 DWORD dwCreationDisposition
;
4948 DWORD dwFlagsAndAttributes
= 0;
4952 winVfsAppData
*pAppData
;
4953 winFile
*pFile
= (winFile
*)id
;
4954 void *zConverted
; /* Filename in OS encoding */
4955 const char *zUtf8Name
= zName
; /* Filename in UTF-8 encoding */
4958 /* If argument zPath is a NULL pointer, this function is required to open
4959 ** a temporary file. Use this buffer to store the file name in.
4961 char *zTmpname
= 0; /* For temporary filename, if necessary. */
4963 int rc
= SQLITE_OK
; /* Function Return Code */
4964 #if !defined(NDEBUG) || SQLITE_OS_WINCE
4965 int eType
= flags
&0xFFFFFF00; /* Type of file to open */
4968 int isExclusive
= (flags
& SQLITE_OPEN_EXCLUSIVE
);
4969 int isDelete
= (flags
& SQLITE_OPEN_DELETEONCLOSE
);
4970 int isCreate
= (flags
& SQLITE_OPEN_CREATE
);
4971 int isReadonly
= (flags
& SQLITE_OPEN_READONLY
);
4972 int isReadWrite
= (flags
& SQLITE_OPEN_READWRITE
);
4975 int isOpenJournal
= (isCreate
&& (
4976 eType
==SQLITE_OPEN_MASTER_JOURNAL
4977 || eType
==SQLITE_OPEN_MAIN_JOURNAL
4978 || eType
==SQLITE_OPEN_WAL
4982 OSTRACE(("OPEN name=%s, pFile=%p, flags=%x, pOutFlags=%p\n",
4983 zUtf8Name
, id
, flags
, pOutFlags
));
4985 /* Check the following statements are true:
4987 ** (a) Exactly one of the READWRITE and READONLY flags must be set, and
4988 ** (b) if CREATE is set, then READWRITE must also be set, and
4989 ** (c) if EXCLUSIVE is set, then CREATE must also be set.
4990 ** (d) if DELETEONCLOSE is set, then CREATE must also be set.
4992 assert((isReadonly
==0 || isReadWrite
==0) && (isReadWrite
|| isReadonly
));
4993 assert(isCreate
==0 || isReadWrite
);
4994 assert(isExclusive
==0 || isCreate
);
4995 assert(isDelete
==0 || isCreate
);
4997 /* The main DB, main journal, WAL file and master journal are never
4998 ** automatically deleted. Nor are they ever temporary files. */
4999 assert( (!isDelete
&& zName
) || eType
!=SQLITE_OPEN_MAIN_DB
);
5000 assert( (!isDelete
&& zName
) || eType
!=SQLITE_OPEN_MAIN_JOURNAL
);
5001 assert( (!isDelete
&& zName
) || eType
!=SQLITE_OPEN_MASTER_JOURNAL
);
5002 assert( (!isDelete
&& zName
) || eType
!=SQLITE_OPEN_WAL
);
5004 /* Assert that the upper layer has set one of the "file-type" flags. */
5005 assert( eType
==SQLITE_OPEN_MAIN_DB
|| eType
==SQLITE_OPEN_TEMP_DB
5006 || eType
==SQLITE_OPEN_MAIN_JOURNAL
|| eType
==SQLITE_OPEN_TEMP_JOURNAL
5007 || eType
==SQLITE_OPEN_SUBJOURNAL
|| eType
==SQLITE_OPEN_MASTER_JOURNAL
5008 || eType
==SQLITE_OPEN_TRANSIENT_DB
|| eType
==SQLITE_OPEN_WAL
5012 memset(pFile
, 0, sizeof(winFile
));
5013 pFile
->h
= INVALID_HANDLE_VALUE
;
5016 if( !zUtf8Name
&& !sqlite3_temp_directory
){
5017 sqlite3_log(SQLITE_ERROR
,
5018 "sqlite3_temp_directory variable should be set for WinRT");
5022 /* If the second argument to this function is NULL, generate a
5023 ** temporary file name to use
5026 assert( isDelete
&& !isOpenJournal
);
5027 rc
= winGetTempname(pVfs
, &zTmpname
);
5028 if( rc
!=SQLITE_OK
){
5029 OSTRACE(("OPEN name=%s, rc=%s", zUtf8Name
, sqlite3ErrName(rc
)));
5032 zUtf8Name
= zTmpname
;
5035 /* Database filenames are double-zero terminated if they are not
5036 ** URIs with parameters. Hence, they can always be passed into
5037 ** sqlite3_uri_parameter().
5039 assert( (eType
!=SQLITE_OPEN_MAIN_DB
) || (flags
& SQLITE_OPEN_URI
) ||
5040 zUtf8Name
[sqlite3Strlen30(zUtf8Name
)+1]==0 );
5042 /* Convert the filename to the system encoding. */
5043 zConverted
= winConvertFromUtf8Filename(zUtf8Name
);
5044 if( zConverted
==0 ){
5045 sqlite3_free(zTmpname
);
5046 OSTRACE(("OPEN name=%s, rc=SQLITE_IOERR_NOMEM", zUtf8Name
));
5047 return SQLITE_IOERR_NOMEM_BKPT
;
5050 if( winIsDir(zConverted
) ){
5051 sqlite3_free(zConverted
);
5052 sqlite3_free(zTmpname
);
5053 OSTRACE(("OPEN name=%s, rc=SQLITE_CANTOPEN_ISDIR", zUtf8Name
));
5054 return SQLITE_CANTOPEN_ISDIR
;
5058 dwDesiredAccess
= GENERIC_READ
| GENERIC_WRITE
;
5060 dwDesiredAccess
= GENERIC_READ
;
5063 /* SQLITE_OPEN_EXCLUSIVE is used to make sure that a new file is
5064 ** created. SQLite doesn't use it to indicate "exclusive access"
5065 ** as it is usually understood.
5068 /* Creates a new file, only if it does not already exist. */
5069 /* If the file exists, it fails. */
5070 dwCreationDisposition
= CREATE_NEW
;
5071 }else if( isCreate
){
5072 /* Open existing file, or create if it doesn't exist */
5073 dwCreationDisposition
= OPEN_ALWAYS
;
5075 /* Opens a file, only if it exists. */
5076 dwCreationDisposition
= OPEN_EXISTING
;
5079 dwShareMode
= FILE_SHARE_READ
| FILE_SHARE_WRITE
;
5083 dwFlagsAndAttributes
= FILE_ATTRIBUTE_HIDDEN
;
5086 dwFlagsAndAttributes
= FILE_ATTRIBUTE_TEMPORARY
5087 | FILE_ATTRIBUTE_HIDDEN
5088 | FILE_FLAG_DELETE_ON_CLOSE
;
5091 dwFlagsAndAttributes
= FILE_ATTRIBUTE_NORMAL
;
5093 /* Reports from the internet are that performance is always
5094 ** better if FILE_FLAG_RANDOM_ACCESS is used. Ticket #2699. */
5096 dwFlagsAndAttributes
|= FILE_FLAG_RANDOM_ACCESS
;
5101 CREATEFILE2_EXTENDED_PARAMETERS extendedParameters
;
5102 extendedParameters
.dwSize
= sizeof(CREATEFILE2_EXTENDED_PARAMETERS
);
5103 extendedParameters
.dwFileAttributes
=
5104 dwFlagsAndAttributes
& FILE_ATTRIBUTE_MASK
;
5105 extendedParameters
.dwFileFlags
= dwFlagsAndAttributes
& FILE_FLAG_MASK
;
5106 extendedParameters
.dwSecurityQosFlags
= SECURITY_ANONYMOUS
;
5107 extendedParameters
.lpSecurityAttributes
= NULL
;
5108 extendedParameters
.hTemplateFile
= NULL
;
5110 h
= osCreateFile2((LPCWSTR
)zConverted
,
5113 dwCreationDisposition
,
5114 &extendedParameters
);
5115 if( h
!=INVALID_HANDLE_VALUE
) break;
5118 int rc2
= winAccess(pVfs
, zName
, SQLITE_ACCESS_READ
, &isRO
);
5119 if( rc2
==SQLITE_OK
&& isRO
) break;
5121 }while( winRetryIoerr(&cnt
, &lastErrno
) );
5124 h
= osCreateFileW((LPCWSTR
)zConverted
,
5127 dwCreationDisposition
,
5128 dwFlagsAndAttributes
,
5130 if( h
!=INVALID_HANDLE_VALUE
) break;
5133 int rc2
= winAccess(pVfs
, zName
, SQLITE_ACCESS_READ
, &isRO
);
5134 if( rc2
==SQLITE_OK
&& isRO
) break;
5136 }while( winRetryIoerr(&cnt
, &lastErrno
) );
5139 #ifdef SQLITE_WIN32_HAS_ANSI
5142 h
= osCreateFileA((LPCSTR
)zConverted
,
5145 dwCreationDisposition
,
5146 dwFlagsAndAttributes
,
5148 if( h
!=INVALID_HANDLE_VALUE
) break;
5151 int rc2
= winAccess(pVfs
, zName
, SQLITE_ACCESS_READ
, &isRO
);
5152 if( rc2
==SQLITE_OK
&& isRO
) break;
5154 }while( winRetryIoerr(&cnt
, &lastErrno
) );
5157 winLogIoerr(cnt
, __LINE__
);
5159 OSTRACE(("OPEN file=%p, name=%s, access=%lx, rc=%s\n", h
, zUtf8Name
,
5160 dwDesiredAccess
, (h
==INVALID_HANDLE_VALUE
) ? "failed" : "ok"));
5162 if( h
==INVALID_HANDLE_VALUE
){
5163 sqlite3_free(zConverted
);
5164 sqlite3_free(zTmpname
);
5165 if( isReadWrite
&& !isExclusive
){
5166 return winOpen(pVfs
, zName
, id
,
5167 ((flags
|SQLITE_OPEN_READONLY
) &
5168 ~(SQLITE_OPEN_CREATE
|SQLITE_OPEN_READWRITE
)),
5171 pFile
->lastErrno
= lastErrno
;
5172 winLogError(SQLITE_CANTOPEN
, pFile
->lastErrno
, "winOpen", zUtf8Name
);
5173 return SQLITE_CANTOPEN_BKPT
;
5179 *pOutFlags
= SQLITE_OPEN_READWRITE
;
5181 *pOutFlags
= SQLITE_OPEN_READONLY
;
5185 OSTRACE(("OPEN file=%p, name=%s, access=%lx, pOutFlags=%p, *pOutFlags=%d, "
5186 "rc=%s\n", h
, zUtf8Name
, dwDesiredAccess
, pOutFlags
, pOutFlags
?
5187 *pOutFlags
: 0, (h
==INVALID_HANDLE_VALUE
) ? "failed" : "ok"));
5189 pAppData
= (winVfsAppData
*)pVfs
->pAppData
;
5193 if( isReadWrite
&& eType
==SQLITE_OPEN_MAIN_DB
5194 && ((pAppData
==NULL
) || !pAppData
->bNoLock
)
5195 && (rc
= winceCreateLock(zName
, pFile
))!=SQLITE_OK
5198 sqlite3_free(zConverted
);
5199 sqlite3_free(zTmpname
);
5200 OSTRACE(("OPEN-CE-LOCK name=%s, rc=%s\n", zName
, sqlite3ErrName(rc
)));
5205 pFile
->zDeleteOnClose
= zConverted
;
5209 sqlite3_free(zConverted
);
5212 sqlite3_free(zTmpname
);
5213 pFile
->pMethod
= pAppData
? pAppData
->pMethod
: &winIoMethod
;
5217 pFile
->ctrlFlags
|= WINFILE_RDONLY
;
5219 if( sqlite3_uri_boolean(zName
, "psow", SQLITE_POWERSAFE_OVERWRITE
) ){
5220 pFile
->ctrlFlags
|= WINFILE_PSOW
;
5222 pFile
->lastErrno
= NO_ERROR
;
5223 pFile
->zPath
= zName
;
5224 #if SQLITE_MAX_MMAP_SIZE>0
5226 pFile
->pMapRegion
= 0;
5227 pFile
->mmapSize
= 0;
5228 pFile
->mmapSizeActual
= 0;
5229 pFile
->mmapSizeMax
= sqlite3GlobalConfig
.szMmap
;
5237 ** Delete the named file.
5239 ** Note that Windows does not allow a file to be deleted if some other
5240 ** process has it open. Sometimes a virus scanner or indexing program
5241 ** will open a journal file shortly after it is created in order to do
5242 ** whatever it does. While this other process is holding the
5243 ** file open, we will be unable to delete it. To work around this
5244 ** problem, we delay 100 milliseconds and try to delete again. Up
5245 ** to MX_DELETION_ATTEMPTs deletion attempts are run before giving
5246 ** up and returning an error.
5248 static int winDelete(
5249 sqlite3_vfs
*pVfs
, /* Not used on win32 */
5250 const char *zFilename
, /* Name of file to delete */
5251 int syncDir
/* Not used on win32 */
5256 DWORD lastErrno
= 0;
5258 UNUSED_PARAMETER(pVfs
);
5259 UNUSED_PARAMETER(syncDir
);
5261 SimulateIOError(return SQLITE_IOERR_DELETE
);
5262 OSTRACE(("DELETE name=%s, syncDir=%d\n", zFilename
, syncDir
));
5264 zConverted
= winConvertFromUtf8Filename(zFilename
);
5265 if( zConverted
==0 ){
5266 OSTRACE(("DELETE name=%s, rc=SQLITE_IOERR_NOMEM\n", zFilename
));
5267 return SQLITE_IOERR_NOMEM_BKPT
;
5272 WIN32_FILE_ATTRIBUTE_DATA sAttrData
;
5273 memset(&sAttrData
, 0, sizeof(sAttrData
));
5274 if ( osGetFileAttributesExW(zConverted
, GetFileExInfoStandard
,
5276 attr
= sAttrData
.dwFileAttributes
;
5278 lastErrno
= osGetLastError();
5279 if( lastErrno
==ERROR_FILE_NOT_FOUND
5280 || lastErrno
==ERROR_PATH_NOT_FOUND
){
5281 rc
= SQLITE_IOERR_DELETE_NOENT
; /* Already gone? */
5288 attr
= osGetFileAttributesW(zConverted
);
5290 if ( attr
==INVALID_FILE_ATTRIBUTES
){
5291 lastErrno
= osGetLastError();
5292 if( lastErrno
==ERROR_FILE_NOT_FOUND
5293 || lastErrno
==ERROR_PATH_NOT_FOUND
){
5294 rc
= SQLITE_IOERR_DELETE_NOENT
; /* Already gone? */
5300 if ( attr
&FILE_ATTRIBUTE_DIRECTORY
){
5301 rc
= SQLITE_ERROR
; /* Files only. */
5304 if ( osDeleteFileW(zConverted
) ){
5305 rc
= SQLITE_OK
; /* Deleted OK. */
5308 if ( !winRetryIoerr(&cnt
, &lastErrno
) ){
5309 rc
= SQLITE_ERROR
; /* No more retries. */
5314 #ifdef SQLITE_WIN32_HAS_ANSI
5317 attr
= osGetFileAttributesA(zConverted
);
5318 if ( attr
==INVALID_FILE_ATTRIBUTES
){
5319 lastErrno
= osGetLastError();
5320 if( lastErrno
==ERROR_FILE_NOT_FOUND
5321 || lastErrno
==ERROR_PATH_NOT_FOUND
){
5322 rc
= SQLITE_IOERR_DELETE_NOENT
; /* Already gone? */
5328 if ( attr
&FILE_ATTRIBUTE_DIRECTORY
){
5329 rc
= SQLITE_ERROR
; /* Files only. */
5332 if ( osDeleteFileA(zConverted
) ){
5333 rc
= SQLITE_OK
; /* Deleted OK. */
5336 if ( !winRetryIoerr(&cnt
, &lastErrno
) ){
5337 rc
= SQLITE_ERROR
; /* No more retries. */
5343 if( rc
&& rc
!=SQLITE_IOERR_DELETE_NOENT
){
5344 rc
= winLogError(SQLITE_IOERR_DELETE
, lastErrno
, "winDelete", zFilename
);
5346 winLogIoerr(cnt
, __LINE__
);
5348 sqlite3_free(zConverted
);
5349 OSTRACE(("DELETE name=%s, rc=%s\n", zFilename
, sqlite3ErrName(rc
)));
5354 ** Check the existence and status of a file.
5356 static int winAccess(
5357 sqlite3_vfs
*pVfs
, /* Not used on win32 */
5358 const char *zFilename
, /* Name of file to check */
5359 int flags
, /* Type of test to make on this file */
5360 int *pResOut
/* OUT: Result */
5364 DWORD lastErrno
= 0;
5366 UNUSED_PARAMETER(pVfs
);
5368 SimulateIOError( return SQLITE_IOERR_ACCESS
; );
5369 OSTRACE(("ACCESS name=%s, flags=%x, pResOut=%p\n",
5370 zFilename
, flags
, pResOut
));
5372 zConverted
= winConvertFromUtf8Filename(zFilename
);
5373 if( zConverted
==0 ){
5374 OSTRACE(("ACCESS name=%s, rc=SQLITE_IOERR_NOMEM\n", zFilename
));
5375 return SQLITE_IOERR_NOMEM_BKPT
;
5379 WIN32_FILE_ATTRIBUTE_DATA sAttrData
;
5380 memset(&sAttrData
, 0, sizeof(sAttrData
));
5381 while( !(rc
= osGetFileAttributesExW((LPCWSTR
)zConverted
,
5382 GetFileExInfoStandard
,
5383 &sAttrData
)) && winRetryIoerr(&cnt
, &lastErrno
) ){}
5385 /* For an SQLITE_ACCESS_EXISTS query, treat a zero-length file
5386 ** as if it does not exist.
5388 if( flags
==SQLITE_ACCESS_EXISTS
5389 && sAttrData
.nFileSizeHigh
==0
5390 && sAttrData
.nFileSizeLow
==0 ){
5391 attr
= INVALID_FILE_ATTRIBUTES
;
5393 attr
= sAttrData
.dwFileAttributes
;
5396 winLogIoerr(cnt
, __LINE__
);
5397 if( lastErrno
!=ERROR_FILE_NOT_FOUND
&& lastErrno
!=ERROR_PATH_NOT_FOUND
){
5398 sqlite3_free(zConverted
);
5399 return winLogError(SQLITE_IOERR_ACCESS
, lastErrno
, "winAccess",
5402 attr
= INVALID_FILE_ATTRIBUTES
;
5406 #ifdef SQLITE_WIN32_HAS_ANSI
5408 attr
= osGetFileAttributesA((char*)zConverted
);
5411 sqlite3_free(zConverted
);
5413 case SQLITE_ACCESS_READ
:
5414 case SQLITE_ACCESS_EXISTS
:
5415 rc
= attr
!=INVALID_FILE_ATTRIBUTES
;
5417 case SQLITE_ACCESS_READWRITE
:
5418 rc
= attr
!=INVALID_FILE_ATTRIBUTES
&&
5419 (attr
& FILE_ATTRIBUTE_READONLY
)==0;
5422 assert(!"Invalid flags argument");
5425 OSTRACE(("ACCESS name=%s, pResOut=%p, *pResOut=%d, rc=SQLITE_OK\n",
5426 zFilename
, pResOut
, *pResOut
));
5431 ** Returns non-zero if the specified path name starts with a drive letter
5432 ** followed by a colon character.
5434 static BOOL
winIsDriveLetterAndColon(
5435 const char *zPathname
5437 return ( sqlite3Isalpha(zPathname
[0]) && zPathname
[1]==':' );
5441 ** Returns non-zero if the specified path name should be used verbatim. If
5442 ** non-zero is returned from this function, the calling function must simply
5443 ** use the provided path name verbatim -OR- resolve it into a full path name
5444 ** using the GetFullPathName Win32 API function (if available).
5446 static BOOL
winIsVerbatimPathname(
5447 const char *zPathname
5450 ** If the path name starts with a forward slash or a backslash, it is either
5451 ** a legal UNC name, a volume relative path, or an absolute path name in the
5452 ** "Unix" format on Windows. There is no easy way to differentiate between
5453 ** the final two cases; therefore, we return the safer return value of TRUE
5454 ** so that callers of this function will simply use it verbatim.
5456 if ( winIsDirSep(zPathname
[0]) ){
5461 ** If the path name starts with a letter and a colon it is either a volume
5462 ** relative path or an absolute path. Callers of this function must not
5463 ** attempt to treat it as a relative path name (i.e. they should simply use
5466 if ( winIsDriveLetterAndColon(zPathname
) ){
5471 ** If we get to this point, the path name should almost certainly be a purely
5472 ** relative one (i.e. not a UNC name, not absolute, and not volume relative).
5478 ** Turn a relative pathname into a full pathname. Write the full
5479 ** pathname into zOut[]. zOut[] will be at least pVfs->mxPathname
5482 static int winFullPathname(
5483 sqlite3_vfs
*pVfs
, /* Pointer to vfs object */
5484 const char *zRelative
, /* Possibly relative input path */
5485 int nFull
, /* Size of output buffer in bytes */
5486 char *zFull
/* Output buffer */
5488 #if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && !defined(__CYGWIN__)
5494 /* If this path name begins with "/X:", where "X" is any alphabetic
5495 ** character, discard the initial "/" from the pathname.
5497 if( zRelative
[0]=='/' && winIsDriveLetterAndColon(zRelative
+1) ){
5501 #if defined(__CYGWIN__)
5502 SimulateIOError( return SQLITE_ERROR
);
5503 UNUSED_PARAMETER(nFull
);
5504 assert( nFull
>=pVfs
->mxPathname
);
5505 if ( sqlite3_data_directory
&& !winIsVerbatimPathname(zRelative
) ){
5507 ** NOTE: We are dealing with a relative path name and the data
5508 ** directory has been set. Therefore, use it as the basis
5509 ** for converting the relative path name to an absolute
5510 ** one by prepending the data directory and a slash.
5512 char *zOut
= sqlite3MallocZero( pVfs
->mxPathname
+1 );
5514 return SQLITE_IOERR_NOMEM_BKPT
;
5516 if( cygwin_conv_path(
5517 (osIsNT() ? CCP_POSIX_TO_WIN_W
: CCP_POSIX_TO_WIN_A
) |
5518 CCP_RELATIVE
, zRelative
, zOut
, pVfs
->mxPathname
+1)<0 ){
5520 return winLogError(SQLITE_CANTOPEN_CONVPATH
, (DWORD
)errno
,
5521 "winFullPathname1", zRelative
);
5523 char *zUtf8
= winConvertToUtf8Filename(zOut
);
5526 return SQLITE_IOERR_NOMEM_BKPT
;
5528 sqlite3_snprintf(MIN(nFull
, pVfs
->mxPathname
), zFull
, "%s%c%s",
5529 sqlite3_data_directory
, winGetDirSep(), zUtf8
);
5530 sqlite3_free(zUtf8
);
5534 char *zOut
= sqlite3MallocZero( pVfs
->mxPathname
+1 );
5536 return SQLITE_IOERR_NOMEM_BKPT
;
5538 if( cygwin_conv_path(
5539 (osIsNT() ? CCP_POSIX_TO_WIN_W
: CCP_POSIX_TO_WIN_A
),
5540 zRelative
, zOut
, pVfs
->mxPathname
+1)<0 ){
5542 return winLogError(SQLITE_CANTOPEN_CONVPATH
, (DWORD
)errno
,
5543 "winFullPathname2", zRelative
);
5545 char *zUtf8
= winConvertToUtf8Filename(zOut
);
5548 return SQLITE_IOERR_NOMEM_BKPT
;
5550 sqlite3_snprintf(MIN(nFull
, pVfs
->mxPathname
), zFull
, "%s", zUtf8
);
5551 sqlite3_free(zUtf8
);
5558 #if (SQLITE_OS_WINCE || SQLITE_OS_WINRT) && !defined(__CYGWIN__)
5559 SimulateIOError( return SQLITE_ERROR
);
5560 /* WinCE has no concept of a relative pathname, or so I am told. */
5561 /* WinRT has no way to convert a relative path to an absolute one. */
5562 if ( sqlite3_data_directory
&& !winIsVerbatimPathname(zRelative
) ){
5564 ** NOTE: We are dealing with a relative path name and the data
5565 ** directory has been set. Therefore, use it as the basis
5566 ** for converting the relative path name to an absolute
5567 ** one by prepending the data directory and a backslash.
5569 sqlite3_snprintf(MIN(nFull
, pVfs
->mxPathname
), zFull
, "%s%c%s",
5570 sqlite3_data_directory
, winGetDirSep(), zRelative
);
5572 sqlite3_snprintf(MIN(nFull
, pVfs
->mxPathname
), zFull
, "%s", zRelative
);
5577 #if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && !defined(__CYGWIN__)
5578 /* It's odd to simulate an io-error here, but really this is just
5579 ** using the io-error infrastructure to test that SQLite handles this
5580 ** function failing. This function could fail if, for example, the
5581 ** current working directory has been unlinked.
5583 SimulateIOError( return SQLITE_ERROR
);
5584 if ( sqlite3_data_directory
&& !winIsVerbatimPathname(zRelative
) ){
5586 ** NOTE: We are dealing with a relative path name and the data
5587 ** directory has been set. Therefore, use it as the basis
5588 ** for converting the relative path name to an absolute
5589 ** one by prepending the data directory and a backslash.
5591 sqlite3_snprintf(MIN(nFull
, pVfs
->mxPathname
), zFull
, "%s%c%s",
5592 sqlite3_data_directory
, winGetDirSep(), zRelative
);
5595 zConverted
= winConvertFromUtf8Filename(zRelative
);
5596 if( zConverted
==0 ){
5597 return SQLITE_IOERR_NOMEM_BKPT
;
5601 nByte
= osGetFullPathNameW((LPCWSTR
)zConverted
, 0, 0, 0);
5603 sqlite3_free(zConverted
);
5604 return winLogError(SQLITE_CANTOPEN_FULLPATH
, osGetLastError(),
5605 "winFullPathname1", zRelative
);
5608 zTemp
= sqlite3MallocZero( nByte
*sizeof(zTemp
[0]) );
5610 sqlite3_free(zConverted
);
5611 return SQLITE_IOERR_NOMEM_BKPT
;
5613 nByte
= osGetFullPathNameW((LPCWSTR
)zConverted
, nByte
, zTemp
, 0);
5615 sqlite3_free(zConverted
);
5616 sqlite3_free(zTemp
);
5617 return winLogError(SQLITE_CANTOPEN_FULLPATH
, osGetLastError(),
5618 "winFullPathname2", zRelative
);
5620 sqlite3_free(zConverted
);
5621 zOut
= winUnicodeToUtf8(zTemp
);
5622 sqlite3_free(zTemp
);
5624 #ifdef SQLITE_WIN32_HAS_ANSI
5627 nByte
= osGetFullPathNameA((char*)zConverted
, 0, 0, 0);
5629 sqlite3_free(zConverted
);
5630 return winLogError(SQLITE_CANTOPEN_FULLPATH
, osGetLastError(),
5631 "winFullPathname3", zRelative
);
5634 zTemp
= sqlite3MallocZero( nByte
*sizeof(zTemp
[0]) );
5636 sqlite3_free(zConverted
);
5637 return SQLITE_IOERR_NOMEM_BKPT
;
5639 nByte
= osGetFullPathNameA((char*)zConverted
, nByte
, zTemp
, 0);
5641 sqlite3_free(zConverted
);
5642 sqlite3_free(zTemp
);
5643 return winLogError(SQLITE_CANTOPEN_FULLPATH
, osGetLastError(),
5644 "winFullPathname4", zRelative
);
5646 sqlite3_free(zConverted
);
5647 zOut
= winMbcsToUtf8(zTemp
, osAreFileApisANSI());
5648 sqlite3_free(zTemp
);
5652 sqlite3_snprintf(MIN(nFull
, pVfs
->mxPathname
), zFull
, "%s", zOut
);
5656 return SQLITE_IOERR_NOMEM_BKPT
;
5661 #ifndef SQLITE_OMIT_LOAD_EXTENSION
5663 ** Interfaces for opening a shared library, finding entry points
5664 ** within the shared library, and closing the shared library.
5666 static void *winDlOpen(sqlite3_vfs
*pVfs
, const char *zFilename
){
5668 #if defined(__CYGWIN__)
5669 int nFull
= pVfs
->mxPathname
+1;
5670 char *zFull
= sqlite3MallocZero( nFull
);
5671 void *zConverted
= 0;
5673 OSTRACE(("DLOPEN name=%s, handle=%p\n", zFilename
, (void*)0));
5676 if( winFullPathname(pVfs
, zFilename
, nFull
, zFull
)!=SQLITE_OK
){
5677 sqlite3_free(zFull
);
5678 OSTRACE(("DLOPEN name=%s, handle=%p\n", zFilename
, (void*)0));
5681 zConverted
= winConvertFromUtf8Filename(zFull
);
5682 sqlite3_free(zFull
);
5684 void *zConverted
= winConvertFromUtf8Filename(zFilename
);
5685 UNUSED_PARAMETER(pVfs
);
5687 if( zConverted
==0 ){
5688 OSTRACE(("DLOPEN name=%s, handle=%p\n", zFilename
, (void*)0));
5693 h
= osLoadPackagedLibrary((LPCWSTR
)zConverted
, 0);
5695 h
= osLoadLibraryW((LPCWSTR
)zConverted
);
5698 #ifdef SQLITE_WIN32_HAS_ANSI
5700 h
= osLoadLibraryA((char*)zConverted
);
5703 OSTRACE(("DLOPEN name=%s, handle=%p\n", zFilename
, (void*)h
));
5704 sqlite3_free(zConverted
);
5707 static void winDlError(sqlite3_vfs
*pVfs
, int nBuf
, char *zBufOut
){
5708 UNUSED_PARAMETER(pVfs
);
5709 winGetLastErrorMsg(osGetLastError(), nBuf
, zBufOut
);
5711 static void (*winDlSym(sqlite3_vfs
*pVfs
,void *pH
,const char *zSym
))(void){
5713 UNUSED_PARAMETER(pVfs
);
5714 proc
= osGetProcAddressA((HANDLE
)pH
, zSym
);
5715 OSTRACE(("DLSYM handle=%p, symbol=%s, address=%p\n",
5716 (void*)pH
, zSym
, (void*)proc
));
5717 return (void(*)(void))proc
;
5719 static void winDlClose(sqlite3_vfs
*pVfs
, void *pHandle
){
5720 UNUSED_PARAMETER(pVfs
);
5721 osFreeLibrary((HANDLE
)pHandle
);
5722 OSTRACE(("DLCLOSE handle=%p\n", (void*)pHandle
));
5724 #else /* if SQLITE_OMIT_LOAD_EXTENSION is defined: */
5726 #define winDlError 0
5728 #define winDlClose 0
5731 /* State information for the randomness gatherer. */
5732 typedef struct EntropyGatherer EntropyGatherer
;
5733 struct EntropyGatherer
{
5734 unsigned char *a
; /* Gather entropy into this buffer */
5735 int na
; /* Size of a[] in bytes */
5736 int i
; /* XOR next input into a[i] */
5737 int nXor
; /* Number of XOR operations done */
5740 #if !defined(SQLITE_TEST) && !defined(SQLITE_OMIT_RANDOMNESS)
5741 /* Mix sz bytes of entropy into p. */
5742 static void xorMemory(EntropyGatherer
*p
, unsigned char *x
, int sz
){
5744 for(j
=0, k
=p
->i
; j
<sz
; j
++){
5746 if( k
>=p
->na
) k
= 0;
5751 #endif /* !defined(SQLITE_TEST) && !defined(SQLITE_OMIT_RANDOMNESS) */
5754 ** Write up to nBuf bytes of randomness into zBuf.
5756 static int winRandomness(sqlite3_vfs
*pVfs
, int nBuf
, char *zBuf
){
5757 #if defined(SQLITE_TEST) || defined(SQLITE_OMIT_RANDOMNESS)
5758 UNUSED_PARAMETER(pVfs
);
5759 memset(zBuf
, 0, nBuf
);
5763 UNUSED_PARAMETER(pVfs
);
5764 memset(zBuf
, 0, nBuf
);
5765 e
.a
= (unsigned char*)zBuf
;
5771 osGetSystemTime(&x
);
5772 xorMemory(&e
, (unsigned char*)&x
, sizeof(SYSTEMTIME
));
5775 DWORD pid
= osGetCurrentProcessId();
5776 xorMemory(&e
, (unsigned char*)&pid
, sizeof(DWORD
));
5780 ULONGLONG cnt
= osGetTickCount64();
5781 xorMemory(&e
, (unsigned char*)&cnt
, sizeof(ULONGLONG
));
5785 DWORD cnt
= osGetTickCount();
5786 xorMemory(&e
, (unsigned char*)&cnt
, sizeof(DWORD
));
5788 #endif /* SQLITE_OS_WINRT */
5791 osQueryPerformanceCounter(&i
);
5792 xorMemory(&e
, (unsigned char*)&i
, sizeof(LARGE_INTEGER
));
5794 #if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && SQLITE_WIN32_USE_UUID
5797 memset(&id
, 0, sizeof(UUID
));
5799 xorMemory(&e
, (unsigned char*)&id
, sizeof(UUID
));
5800 memset(&id
, 0, sizeof(UUID
));
5801 osUuidCreateSequential(&id
);
5802 xorMemory(&e
, (unsigned char*)&id
, sizeof(UUID
));
5804 #endif /* !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && SQLITE_WIN32_USE_UUID */
5805 return e
.nXor
>nBuf
? nBuf
: e
.nXor
;
5806 #endif /* defined(SQLITE_TEST) || defined(SQLITE_OMIT_RANDOMNESS) */
5811 ** Sleep for a little while. Return the amount of time slept.
5813 static int winSleep(sqlite3_vfs
*pVfs
, int microsec
){
5814 sqlite3_win32_sleep((microsec
+999)/1000);
5815 UNUSED_PARAMETER(pVfs
);
5816 return ((microsec
+999)/1000)*1000;
5820 ** The following variable, if set to a non-zero value, is interpreted as
5821 ** the number of seconds since 1970 and is used to set the result of
5822 ** sqlite3OsCurrentTime() during testing.
5825 int sqlite3_current_time
= 0; /* Fake system time in seconds since 1970. */
5829 ** Find the current time (in Universal Coordinated Time). Write into *piNow
5830 ** the current time and date as a Julian Day number times 86_400_000. In
5831 ** other words, write into *piNow the number of milliseconds since the Julian
5832 ** epoch of noon in Greenwich on November 24, 4714 B.C according to the
5833 ** proleptic Gregorian calendar.
5835 ** On success, return SQLITE_OK. Return SQLITE_ERROR if the time and date
5838 static int winCurrentTimeInt64(sqlite3_vfs
*pVfs
, sqlite3_int64
*piNow
){
5839 /* FILETIME structure is a 64-bit value representing the number of
5840 100-nanosecond intervals since January 1, 1601 (= JD 2305813.5).
5843 static const sqlite3_int64 winFiletimeEpoch
= 23058135*(sqlite3_int64
)8640000;
5845 static const sqlite3_int64 unixEpoch
= 24405875*(sqlite3_int64
)8640000;
5847 /* 2^32 - to avoid use of LL and warnings in gcc */
5848 static const sqlite3_int64 max32BitValue
=
5849 (sqlite3_int64
)2000000000 + (sqlite3_int64
)2000000000 +
5850 (sqlite3_int64
)294967296;
5854 osGetSystemTime(&time
);
5855 /* if SystemTimeToFileTime() fails, it returns zero. */
5856 if (!osSystemTimeToFileTime(&time
,&ft
)){
5857 return SQLITE_ERROR
;
5860 osGetSystemTimeAsFileTime( &ft
);
5863 *piNow
= winFiletimeEpoch
+
5864 ((((sqlite3_int64
)ft
.dwHighDateTime
)*max32BitValue
) +
5865 (sqlite3_int64
)ft
.dwLowDateTime
)/(sqlite3_int64
)10000;
5868 if( sqlite3_current_time
){
5869 *piNow
= 1000*(sqlite3_int64
)sqlite3_current_time
+ unixEpoch
;
5872 UNUSED_PARAMETER(pVfs
);
5877 ** Find the current time (in Universal Coordinated Time). Write the
5878 ** current time and date as a Julian Day number into *prNow and
5879 ** return 0. Return 1 if the time and date cannot be found.
5881 static int winCurrentTime(sqlite3_vfs
*pVfs
, double *prNow
){
5884 rc
= winCurrentTimeInt64(pVfs
, &i
);
5886 *prNow
= i
/86400000.0;
5892 ** The idea is that this function works like a combination of
5893 ** GetLastError() and FormatMessage() on Windows (or errno and
5894 ** strerror_r() on Unix). After an error is returned by an OS
5895 ** function, SQLite calls this function with zBuf pointing to
5896 ** a buffer of nBuf bytes. The OS layer should populate the
5897 ** buffer with a nul-terminated UTF-8 encoded error message
5898 ** describing the last IO error to have occurred within the calling
5901 ** If the error message is too large for the supplied buffer,
5902 ** it should be truncated. The return value of xGetLastError
5903 ** is zero if the error message fits in the buffer, or non-zero
5904 ** otherwise (if the message was truncated). If non-zero is returned,
5905 ** then it is not necessary to include the nul-terminator character
5906 ** in the output buffer.
5908 ** Not supplying an error message will have no adverse effect
5909 ** on SQLite. It is fine to have an implementation that never
5910 ** returns an error message:
5912 ** int xGetLastError(sqlite3_vfs *pVfs, int nBuf, char *zBuf){
5913 ** assert(zBuf[0]=='\0');
5917 ** However if an error message is supplied, it will be incorporated
5918 ** by sqlite into the error message available to the user using
5919 ** sqlite3_errmsg(), possibly making IO errors easier to debug.
5921 static int winGetLastError(sqlite3_vfs
*pVfs
, int nBuf
, char *zBuf
){
5922 DWORD e
= osGetLastError();
5923 UNUSED_PARAMETER(pVfs
);
5924 if( nBuf
>0 ) winGetLastErrorMsg(e
, nBuf
, zBuf
);
5929 ** Initialize and deinitialize the operating system interface.
5931 int sqlite3_os_init(void){
5932 static sqlite3_vfs winVfs
= {
5934 sizeof(winFile
), /* szOsFile */
5935 SQLITE_WIN32_MAX_PATH_BYTES
, /* mxPathname */
5937 "win32", /* zName */
5938 &winAppData
, /* pAppData */
5939 winOpen
, /* xOpen */
5940 winDelete
, /* xDelete */
5941 winAccess
, /* xAccess */
5942 winFullPathname
, /* xFullPathname */
5943 winDlOpen
, /* xDlOpen */
5944 winDlError
, /* xDlError */
5945 winDlSym
, /* xDlSym */
5946 winDlClose
, /* xDlClose */
5947 winRandomness
, /* xRandomness */
5948 winSleep
, /* xSleep */
5949 winCurrentTime
, /* xCurrentTime */
5950 winGetLastError
, /* xGetLastError */
5951 winCurrentTimeInt64
, /* xCurrentTimeInt64 */
5952 winSetSystemCall
, /* xSetSystemCall */
5953 winGetSystemCall
, /* xGetSystemCall */
5954 winNextSystemCall
, /* xNextSystemCall */
5956 #if defined(SQLITE_WIN32_HAS_WIDE)
5957 static sqlite3_vfs winLongPathVfs
= {
5959 sizeof(winFile
), /* szOsFile */
5960 SQLITE_WINNT_MAX_PATH_BYTES
, /* mxPathname */
5962 "win32-longpath", /* zName */
5963 &winAppData
, /* pAppData */
5964 winOpen
, /* xOpen */
5965 winDelete
, /* xDelete */
5966 winAccess
, /* xAccess */
5967 winFullPathname
, /* xFullPathname */
5968 winDlOpen
, /* xDlOpen */
5969 winDlError
, /* xDlError */
5970 winDlSym
, /* xDlSym */
5971 winDlClose
, /* xDlClose */
5972 winRandomness
, /* xRandomness */
5973 winSleep
, /* xSleep */
5974 winCurrentTime
, /* xCurrentTime */
5975 winGetLastError
, /* xGetLastError */
5976 winCurrentTimeInt64
, /* xCurrentTimeInt64 */
5977 winSetSystemCall
, /* xSetSystemCall */
5978 winGetSystemCall
, /* xGetSystemCall */
5979 winNextSystemCall
, /* xNextSystemCall */
5982 static sqlite3_vfs winNolockVfs
= {
5984 sizeof(winFile
), /* szOsFile */
5985 SQLITE_WIN32_MAX_PATH_BYTES
, /* mxPathname */
5987 "win32-none", /* zName */
5988 &winNolockAppData
, /* pAppData */
5989 winOpen
, /* xOpen */
5990 winDelete
, /* xDelete */
5991 winAccess
, /* xAccess */
5992 winFullPathname
, /* xFullPathname */
5993 winDlOpen
, /* xDlOpen */
5994 winDlError
, /* xDlError */
5995 winDlSym
, /* xDlSym */
5996 winDlClose
, /* xDlClose */
5997 winRandomness
, /* xRandomness */
5998 winSleep
, /* xSleep */
5999 winCurrentTime
, /* xCurrentTime */
6000 winGetLastError
, /* xGetLastError */
6001 winCurrentTimeInt64
, /* xCurrentTimeInt64 */
6002 winSetSystemCall
, /* xSetSystemCall */
6003 winGetSystemCall
, /* xGetSystemCall */
6004 winNextSystemCall
, /* xNextSystemCall */
6006 #if defined(SQLITE_WIN32_HAS_WIDE)
6007 static sqlite3_vfs winLongPathNolockVfs
= {
6009 sizeof(winFile
), /* szOsFile */
6010 SQLITE_WINNT_MAX_PATH_BYTES
, /* mxPathname */
6012 "win32-longpath-none", /* zName */
6013 &winNolockAppData
, /* pAppData */
6014 winOpen
, /* xOpen */
6015 winDelete
, /* xDelete */
6016 winAccess
, /* xAccess */
6017 winFullPathname
, /* xFullPathname */
6018 winDlOpen
, /* xDlOpen */
6019 winDlError
, /* xDlError */
6020 winDlSym
, /* xDlSym */
6021 winDlClose
, /* xDlClose */
6022 winRandomness
, /* xRandomness */
6023 winSleep
, /* xSleep */
6024 winCurrentTime
, /* xCurrentTime */
6025 winGetLastError
, /* xGetLastError */
6026 winCurrentTimeInt64
, /* xCurrentTimeInt64 */
6027 winSetSystemCall
, /* xSetSystemCall */
6028 winGetSystemCall
, /* xGetSystemCall */
6029 winNextSystemCall
, /* xNextSystemCall */
6033 /* Double-check that the aSyscall[] array has been constructed
6034 ** correctly. See ticket [bb3a86e890c8e96ab] */
6035 assert( ArraySize(aSyscall
)==80 );
6037 /* get memory map allocation granularity */
6038 memset(&winSysInfo
, 0, sizeof(SYSTEM_INFO
));
6040 osGetNativeSystemInfo(&winSysInfo
);
6042 osGetSystemInfo(&winSysInfo
);
6044 assert( winSysInfo
.dwAllocationGranularity
>0 );
6045 assert( winSysInfo
.dwPageSize
>0 );
6047 sqlite3_vfs_register(&winVfs
, 1);
6049 #if defined(SQLITE_WIN32_HAS_WIDE)
6050 sqlite3_vfs_register(&winLongPathVfs
, 0);
6053 sqlite3_vfs_register(&winNolockVfs
, 0);
6055 #if defined(SQLITE_WIN32_HAS_WIDE)
6056 sqlite3_vfs_register(&winLongPathNolockVfs
, 0);
6062 int sqlite3_os_end(void){
6064 if( sleepObj
!=NULL
){
6065 osCloseHandle(sleepObj
);
6072 #endif /* SQLITE_OS_WIN */