cross-compile/linux/sigrok-cross-linux

   1 #!/bin/sh
   2 ##
   3 ## This file is part of the sigrok-util project.
   4 ##
   5 ## Copyright (C) 2014 Uwe Hermann <uwe@hermann-uwe.de>
   6 ##
   7 ## This program is free software; you can redistribute it and/or modify
   8 ## it under the terms of the GNU General Public License as published by
   9 ## the Free Software Foundation; either version 2 of the License, or
  10 ## (at your option) any later version.
  11 ##
  12 ## This program is distributed in the hope that it will be useful,
  13 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 ## GNU General Public License for more details.
  16 ##
  17 ## You should have received a copy of the GNU General Public License
  18 ## along with this program; if not, see <http://www.gnu.org/licenses/>.
  19 ##
  20
  21 set -e
  22
  23 # Uncomment/set the following to match your cross-toolchain setup.
  24 # TOOLCHAIN=...
  25 # TOOLCHAIN_TRIPLET=...
  26 # C="--host=$TOOLCHAIN_TRIPLET"
  27 # export PATH=$TOOLCHAIN/bin:$PATH
  28
  29 # The path where the compiled packages will be installed.
  30 PREFIX=$HOME/sr
  31
  32 # The path where to download files to and where to build packages.
  33 BUILDDIR=./build
  34
  35 # The path where the libsigrok Python bindings will be installed.
  36 PYPATH=$PREFIX/lib/python2.7/site-packages
  37
  38 # JDK include path. Usually found automatically, except on FreeBSD.
  39 if [ `uname` = "FreeBSD" ]; then
  40         JDK="--with-jni-include-path=/usr/local/openjdk7/include"
  41 fi
  42
  43 # Edit this to control verbose build output.
  44 # V="V=1 VERBOSE=1"
  45
  46 # Edit this to enable/disable/modify parallel compiles.
  47 PARALLEL="-j 2"
  48
  49 # Edit this to enable/disable building certain components.
  50 BUILD_SIGROK_FIRMWARE_FX2LAFW=1
  51
  52 # Uncomment the following lines to build with clang and run scan-build.
  53 # export CC=clang
  54 # export CXX=clang++
  55 # SB="scan-build -k -v"
  56
  57 # You usually don't need to change anything below this line.
  58
  59 # -----------------------------------------------------------------------------
  60
  61 P="$PREFIX/lib/pkgconfig"
  62 C="$C --prefix=$PREFIX"
  63
  64 # Remove build directory contents (if any) and create a new build dir.
  65 rm -rf $BUILDDIR
  66 mkdir $BUILDDIR
  67 cd $BUILDDIR
  68
  69 GIT_CLONE="git clone --depth=1"
  70
  71 REPO_BASE="git://sigrok.org"
  72
  73 # -----------------------------------------------------------------------------
  74
  75 # libserialport
  76 $GIT_CLONE $REPO_BASE/libserialport
  77 cd libserialport
  78 ./autogen.sh
  79 mkdir build
  80 cd build
  81 $SB ../configure $C
  82 $SB make $PARALLEL $V
  83 make install $V
  84 cd ../..
  85
  86 # libsigrok
  87 mkdir -p $PYPATH
  88 $GIT_CLONE $REPO_BASE/libsigrok
  89 cd libsigrok
  90 ./autogen.sh
  91 mkdir build
  92 cd build
  93 PKG_CONFIG_PATH=$P $SB ../configure $C $JDK
  94 $SB make $PARALLEL $V
  95 PYTHONPATH=$PYPATH $SB make install $V
  96 $SB make check $V
  97 cd ../..
  98
  99 # libsigrokdecode
 100 $GIT_CLONE $REPO_BASE/libsigrokdecode
 101 cd libsigrokdecode
 102 ./autogen.sh
 103 mkdir build
 104 cd build
 105 PKG_CONFIG_PATH=$P $SB ../configure $C
 106 $SB make $PARALLEL $V
 107 make install $V
 108 $SB make check $V
 109 cd ../..
 110
 111 # sigrok-firmware
 112 $GIT_CLONE $REPO_BASE/sigrok-firmware
 113 cd sigrok-firmware
 114 ./autogen.sh
 115 mkdir build
 116 cd build
 117 # Nothing gets cross-compiled here, we just need 'make install' basically.
 118 $SB ../configure $C
 119 make install $V
 120 cd ../..
 121
 122 if [ $BUILD_SIGROK_FIRMWARE_FX2LAFW = 1 ]; then
 123 # sigrok-firmware-fx2lafw
 124 $GIT_CLONE $REPO_BASE/sigrok-firmware-fx2lafw
 125 cd sigrok-firmware-fx2lafw
 126 ./autogen.sh
 127 mkdir build
 128 cd build
 129 # We're building the fx2lafw firmware on the host, no need to cross-compile.
 130 $SB ../configure $C
 131 make $PARALLEL $V
 132 make install $V
 133 cd ../..
 134 fi
 135
 136 # sigrok-cli
 137 $GIT_CLONE $REPO_BASE/sigrok-cli
 138 cd sigrok-cli
 139 ./autogen.sh
 140 mkdir build
 141 cd build
 142 if [ `uname` = "FreeBSD" ]; then
 143         # Temporary fix for: http://sigrok.org/bugzilla/show_bug.cgi?id=552
 144         PKG_CONFIG_PATH=$P $SB ../configure $C LDFLAGS=-lusb
 145 else
 146         PKG_CONFIG_PATH=$P $SB ../configure $C
 147 fi
 148 $SB make $PARALLEL $V
 149 make install $V
 150 cd ../..
 151
 152 # PulseView
 153 $GIT_CLONE $REPO_BASE/pulseview
 154 cd pulseview
 155 mkdir build
 156 cd build
 157 PKG_CONFIG_PATH=$P $SB cmake -DCMAKE_INSTALL_PREFIX:PATH=$PREFIX -DDISABLE_WERROR=y -DENABLE_TESTS=y -DCMAKE_EXPORT_COMPILE_COMMANDS=y ..
 158 $SB make $PARALLEL $V
 159 make install $V
 160 $SB make test $V
 161 cd ../..