1.0.19.26: add THREAD-YIELD to GET-SPINLOCK

[sbcl/pkhuong.git] / src / cold / shared.lisp

;;;; stuff which is not specific to any particular build phase, but
;;;; used by most of them
;;;;
;;;; Note: It's specifically not used when bootstrapping PCL, because
;;;; we do SAVE-LISP after that, and we don't want to save extraneous
;;;; bootstrapping machinery into the frozen image which will
;;;; subsequently be used as the mother of all Lisp sessions.

;;;; This software is part of the SBCL system. See the README file for
;;;; more information.
;;;;
;;;; This software is derived from the CMU CL system, which was
;;;; written at Carnegie Mellon University and released into the
;;;; public domain. The software is in the public domain and is
;;;; provided with absolutely no warranty. See the COPYING and CREDITS
;;;; files for more information.

;;; SB-COLD holds stuff used to build the initial SBCL core file
;;; (including not only the final construction of the core file, but
;;; also the preliminary steps like e.g. building the cross-compiler
;;; and running the cross-compiler to produce target FASL files).
(defpackage "SB-COLD" (:use "CL"))

(in-package "SB-COLD")

;;; prefixes for filename stems when cross-compiling. These are quite arbitrary
;;; (although of course they shouldn't collide with anything we don't want to
;;; write over). In particular, they can be either relative path names (e.g.
;;; "host-objects/" or absolute pathnames (e.g. "/tmp/sbcl-xc-host-objects/").
;;;
;;; The cross-compilation process will force the creation of these directories
;;; by executing CL:ENSURE-DIRECTORIES-EXIST (on the xc host Common Lisp).
(defvar *host-obj-prefix*)
(defvar *target-obj-prefix*)

;;; suffixes for filename stems when cross-compiling
(defvar *host-obj-suffix*
  (or
   ;; On some xc hosts, it's impossible to LOAD a fasl file unless it
   ;; has the same extension that the host uses for COMPILE-FILE
   ;; output, so we have to be careful to use the xc host's preferred
   ;; extension.
   ;;
   ;; FIXME: This is a little ugly and annoying to maintain. And
   ;; there's very likely some way to rearrange the build process so
   ;; that we never explicitly refer to host object file suffixes,
   ;; only to the result of CL:COMPILE-FILE-PATHNAME.
   #+lispworks ".ufsl" ; as per Lieven Marchand sbcl-devel 2002-02-01
   #+(and openmcl (not darwin)) ".pfsl"
   #+(and openmcl darwin) ".dfsl"
   ;; On most xc hosts, any old extension works, so we use an
   ;; arbitrary one.
   ".lisp-obj"))
(defvar *target-obj-suffix*
  ;; Target fasl files are LOADed (actually only quasi-LOADed, in
  ;; GENESIS) only by SBCL code, and it doesn't care about particular
  ;; extensions, so we can use something arbitrary.
  ".lisp-obj")

;;; a function of one functional argument, which calls its functional argument
;;; in an environment suitable for compiling the target. (This environment
;;; includes e.g. a suitable *FEATURES* value.)
(declaim (type function *in-target-compilation-mode-fn*))
(defvar *in-target-compilation-mode-fn*)

;;; a function with the same calling convention as CL:COMPILE-FILE, to be
;;; used to translate ordinary Lisp source files into target object files
(declaim (type function *target-compile-file*))
(defvar *target-compile-file*)

;;; designator for a function with the same calling convention as
;;; SB-C:ASSEMBLE-FILE, to be used to translate assembly files into target
;;; object files
(defvar *target-assemble-file*)
\f
;;;; some tools

;;; Take the file named X and make it into a file named Y. Sorta like
;;; UNIX, and unlike Common Lisp's bare RENAME-FILE, we don't allow
;;; information from the original filename to influence the final
;;; filename. (The reason that it's only sorta like UNIX is that in
;;; UNIX "mv foo bar/" will work, but the analogous
;;; (RENAME-FILE-A-LA-UNIX "foo" "bar/") should fail.)
;;;
;;; (This is a workaround for the weird behavior of Debian CMU CL
;;; 2.4.6, where (RENAME-FILE "dir/x" "dir/y") tries to create a file
;;; called "dir/dir/y". If that behavior goes away, then we should be
;;; able to get rid of this function and use plain RENAME-FILE in the
;;; COMPILE-STEM function above. -- WHN 19990321
(defun rename-file-a-la-unix (x y)

  (let ((path    ;; (Note that the TRUENAME expression here is lifted from an
                 ;; example in the ANSI spec for TRUENAME.)
         (with-open-file (stream y :direction :output)
           (close stream)
           ;; From the ANSI spec: "In this case, the file is closed
           ;; when the truename is tried, so the truename
           ;; information is reliable."
           (truename stream))))
    (delete-file path)
    (rename-file x path)))
(compile 'rename-file-a-la-unix)

;;; a wrapper for compilation/assembly, used mostly to centralize
;;; the procedure for finding full filenames from "stems"
;;;
;;; Compile the source file whose basic name is STEM, using some
;;; standard-for-the-SBCL-build-process procedures to generate the
;;; full pathnames of source file and object file. Return the pathname
;;; of the object file for STEM. Several &KEY arguments are accepted:
;;;   :SRC-PREFIX, :SRC-SUFFIX =
;;;      strings to be concatenated to STEM to produce source filename
;;;   :OBJ-PREFIX, :OBJ-SUFFIX =
;;;      strings to be concatenated to STEM to produce object filename
;;;   :TMP-OBJ-SUFFIX-SUFFIX =
;;;      string to be appended to the name of an object file to produce
;;;      the name of a temporary object file
;;;   :COMPILE-FILE, :IGNORE-FAILURE-P =
;;;     :COMPILE-FILE is a function to use for compiling the file
;;;     (with the same calling conventions as ANSI CL:COMPILE-FILE).
;;;     If the third return value (FAILURE-P) of this function is
;;;     true, a continuable error will be signalled, unless
;;;     :IGNORE-FAILURE-P is set, in which case only a warning will be
;;;     signalled.
(defun compile-stem (stem
                     &key
                     (obj-prefix "")
                     (obj-suffix (error "missing OBJ-SUFFIX"))
                     (tmp-obj-suffix-suffix "-tmp")
                     (src-prefix "")
                     (src-suffix ".lisp")
                     (compile-file #'compile-file)
                     trace-file
                     ignore-failure-p)

  (declare (type function compile-file))

  (let* (;; KLUDGE: Note that this CONCATENATE 'STRING stuff is not The Common
         ;; Lisp Way, although it works just fine for common UNIX environments.
         ;; Should it come to pass that the system is ported to environments
         ;; where version numbers and so forth become an issue, it might become
         ;; urgent to rewrite this using the fancy Common Lisp PATHNAME
         ;; machinery instead of just using strings. In the absence of such a
         ;; port, it might or might be a good idea to do the rewrite.
         ;; -- WHN 19990815
         (src (concatenate 'string src-prefix stem src-suffix))
         (obj (concatenate 'string obj-prefix stem obj-suffix))
         (tmp-obj (concatenate 'string obj tmp-obj-suffix-suffix)))

    (ensure-directories-exist obj :verbose t)

    ;; We're about to set about building a new object file. First, we
    ;; delete any preexisting object file in order to avoid confusing
    ;; ourselves later should we happen to bail out of compilation
    ;; with an error.
    (when (probe-file obj)
      (delete-file obj))

    ;; Original comment:
    ;;
    ;;   Work around a bug in CLISP 1999-01-08 #'COMPILE-FILE: CLISP
    ;;   mangles relative pathnames passed as :OUTPUT-FILE arguments,
    ;;   but works OK with absolute pathnames.
    ;;
    ;; following discussion on cmucl-imp 2002-07
    ;; "COMPILE-FILE-PATHNAME", it would seem safer to deal with
    ;; absolute pathnames all the time; it is no longer clear that the
    ;; original behaviour in CLISP was wrong or that the current
    ;; behaviour is right; and in any case absolutifying the pathname
    ;; insulates us against changes of behaviour. -- CSR, 2002-08-09
    (setf tmp-obj
          ;; (Note that this idiom is taken from the ANSI
          ;; documentation for TRUENAME.)
          (with-open-file (stream tmp-obj
                                  :direction :output
                                  ;; Compilation would overwrite the
                                  ;; temporary object anyway and overly
                                  ;; strict implementations default
                                  ;; to :ERROR.
                                  :if-exists :supersede)
            (close stream)
            (truename stream)))
    ;; and some compilers (e.g. OpenMCL) will complain if they're
    ;; asked to write over a file that exists already (and isn't
    ;; recognizeably a fasl file), so
    (when (probe-file tmp-obj)
      (delete-file tmp-obj))

    ;; Try to use the compiler to generate a new temporary object file.
    (flet ((report-recompile-restart (stream)
             (format stream "Recompile file ~S" src))
           (report-continue-restart (stream)
             (format stream "Continue, using possibly bogus file ~S" obj)))
      (tagbody
       retry-compile-file
         (multiple-value-bind (output-truename warnings-p failure-p)
            (if trace-file
                (funcall compile-file src :output-file tmp-obj
                         :trace-file t)
                (funcall compile-file src :output-file tmp-obj ))
           (declare (ignore warnings-p))
           (cond ((not output-truename)
                  (error "couldn't compile ~S" src))
                 (failure-p
                  (if ignore-failure-p
                      (warn "ignoring FAILURE-P return value from compilation of ~S"
                            src)
                      (unwind-protect
                           (restart-case
                               (error "FAILURE-P was set when creating ~S."
                                      obj)
                             (recompile ()
                               :report report-recompile-restart
                               (go retry-compile-file))
                             (continue ()
                               :report report-continue-restart
                               (setf failure-p nil)))
                        ;; Don't leave failed object files lying around.
                        (when (and failure-p (probe-file tmp-obj))
                          (delete-file tmp-obj)
                          (format t "~&deleted ~S~%" tmp-obj)))))
                 ;; Otherwise: success, just fall through.
                 (t nil)))))

    ;; If we get to here, compilation succeeded, so it's OK to rename
    ;; the temporary output file to the permanent object file.
    (rename-file-a-la-unix tmp-obj obj)

    ;; nice friendly traditional return value
    (pathname obj)))
(compile 'compile-stem)

;;; other miscellaneous tools
(load "src/cold/read-from-file.lisp")
(load "src/cold/rename-package-carefully.lisp")
(load "src/cold/with-stuff.lisp")

;;; Try to minimize/conceal any non-standardness of the host Common Lisp.
(load "src/cold/ansify.lisp")
\f
;;;; special read-macros for building the cold system (and even for
;;;; building some of our tools for building the cold system)

(load "src/cold/shebang.lisp")

;;; When cross-compiling, the *FEATURES* set for the target Lisp is
;;; not in general the same as the *FEATURES* set for the host Lisp.
;;; In order to refer to target features specifically, we refer to
;;; *SHEBANG-FEATURES* instead of *FEATURES*, and use the #!+ and #!-
;;; readmacros instead of the ordinary #+ and #- readmacros.
(setf *shebang-features*
      (let* ((default-features
               (append (read-from-file "base-target-features.lisp-expr")
                       (read-from-file "local-target-features.lisp-expr")))
             (customizer-file-name "customize-target-features.lisp")
             (customizer (if (probe-file customizer-file-name)
                             (compile nil
                                      (read-from-file customizer-file-name))
                             #'identity)))
        (funcall customizer default-features)))
(let ((*print-length* nil)
      (*print-level* nil))
  (format t
          "target features *SHEBANG-FEATURES*=~@<~S~:>~%"
          *shebang-features*))

(defvar *shebang-backend-subfeatures*
  (let* ((default-subfeatures nil)
         (customizer-file-name "customize-backend-subfeatures.lisp")
         (customizer (if (probe-file customizer-file-name)
                         (compile nil
                                  (read-from-file customizer-file-name))
                         #'identity)))
    (funcall customizer default-subfeatures)))
(let ((*print-length* nil)
      (*print-level* nil))
  (format t
          "target backend-subfeatures *SHEBANG-BACKEND-FEATURES*=~@<~S~:>~%"
          *shebang-backend-subfeatures*))
\f
;;;; cold-init-related PACKAGE and SYMBOL tools

;;; Once we're done with possibly ANSIfying the COMMON-LISP package,
;;; it's probably a mistake if we change it (beyond changing the
;;; values of special variables such as *** and +, anyway). Set up
;;; machinery to warn us when/if we change it.
;;;
;;; All code depending on this is itself dependent on #!+SB-SHOW.
#!+sb-show
(progn
  (load "src/cold/snapshot.lisp")
  (defvar *cl-snapshot* (take-snapshot "COMMON-LISP")))
\f
;;;; master list of source files and their properties

;;; flags which can be used to describe properties of source files
(defparameter
  *expected-stem-flags*
  '(;; meaning: This file is not to be compiled when building the
    ;; cross-compiler which runs on the host ANSI Lisp. ("not host
    ;; code", i.e. does not execute on host -- but may still be
    ;; cross-compiled by the host, so that it executes on the target)
    :not-host
    ;; meaning: This file is not to be compiled as part of the target
    ;; SBCL. ("not target code" -- but still presumably host code,
    ;; used to support the cross-compilation process)
    :not-target
    ;; meaning: The #'COMPILE-STEM argument :TRACE-FILE should be T.
    ;; When the compiler is SBCL's COMPILE-FILE or something like it,
    ;; compiling "foo.lisp" will generate "foo.trace" which contains lots
    ;; of exciting low-level information about representation selection,
    ;; VOPs used by the compiler, and bits of assembly.
    :trace-file
    ;; meaning: This file is to be processed with the SBCL assembler,
    ;; not COMPILE-FILE. (Note that this doesn't make sense unless
    ;; :NOT-HOST is also set, since the SBCL assembler doesn't exist
    ;; while the cross-compiler is being built in the host ANSI Lisp.)
    :assem
    ;; meaning: The #'COMPILE-STEM argument called :IGNORE-FAILURE-P
    ;; should be true. (This is a KLUDGE: I'd like to get rid of it.
    ;; For now, it exists so that compilation can proceed through the
    ;; legacy warnings in src/compiler/x86/array.lisp, which I've
    ;; never figured out but which were apparently acceptable in CMU
    ;; CL. Eventually, it would be great to just get rid of all
    ;; warnings and remove support for this flag. -- WHN 19990323)
    :ignore-failure-p))

(defparameter *stems-and-flags* (read-from-file "build-order.lisp-expr"))

(defmacro do-stems-and-flags ((stem flags) &body body)
  (let ((stem-and-flags (gensym "STEM-AND-FLAGS")))
    `(dolist (,stem-and-flags *stems-and-flags*)
       (let ((,stem (first ,stem-and-flags))
             (,flags (rest ,stem-and-flags)))
         ,@body))))

;;; Check for stupid typos in FLAGS list keywords.
(let ((stems (make-hash-table :test 'equal)))
  (do-stems-and-flags (stem flags)
    (if (gethash stem stems)
      (error "duplicate stem ~S in *STEMS-AND-FLAGS*" stem)
      (setf (gethash stem stems) t))
    (let ((set-difference (set-difference flags *expected-stem-flags*)))
      (when set-difference
        (error "found unexpected flag(s) in *STEMS-AND-FLAGS*: ~S"
               set-difference)))))
\f
;;;; tools to compile SBCL sources to create the cross-compiler

;;; Execute function FN in an environment appropriate for compiling the
;;; cross-compiler's source code in the cross-compilation host.
(defun in-host-compilation-mode (fn)
  (declare (type function fn))
  (let ((*features* (cons :sb-xc-host *features*))
        ;; the CROSS-FLOAT-INFINITY-KLUDGE, as documented in
        ;; base-target-features.lisp-expr:
        (*shebang-features* (set-difference *shebang-features*
                                            '(:sb-propagate-float-type
                                              :sb-propagate-fun-type))))
    (with-additional-nickname ("SB-XC" "SB!XC")
      (funcall fn))))
(compile 'in-host-compilation-mode)

;;; Process a file as source code for the cross-compiler, compiling it
;;; (if necessary) in the appropriate environment, then loading it
;;; into the cross-compilation host Common lisp.
(defun host-cload-stem (stem &key ignore-failure-p)
  (let ((compiled-filename (in-host-compilation-mode
                            (lambda ()
                              (compile-stem
                               stem
                               :obj-prefix *host-obj-prefix*
                               :obj-suffix *host-obj-suffix*
                               :compile-file #'cl:compile-file
                               :ignore-failure-p ignore-failure-p)))))
    (load compiled-filename)))
(compile 'host-cload-stem)

;;; like HOST-CLOAD-STEM, except that we don't bother to compile
(defun host-load-stem (stem &key ignore-failure-p)
  (declare (ignore ignore-failure-p)) ; (It's only relevant when
  ;; compiling.) KLUDGE: It's untidy to have the knowledge of how to
  ;; construct complete filenames from stems in here as well as in
  ;; COMPILE-STEM. It should probably be factored out somehow. -- WHN
  ;; 19990815
  (load (concatenate 'simple-string *host-obj-prefix* stem *host-obj-suffix*)))
(compile 'host-load-stem)
\f
;;;; tools to compile SBCL sources to create object files which will
;;;; be used to create the target SBCL .core file

;;; Run the cross-compiler on a file in the source directory tree to
;;; produce a corresponding file in the target object directory tree.
(defun target-compile-stem (stem &key assem-p ignore-failure-p trace-file)
  (funcall *in-target-compilation-mode-fn*
           (lambda ()
             (compile-stem stem
                           :obj-prefix *target-obj-prefix*
                           :obj-suffix *target-obj-suffix*
                          :trace-file trace-file
                           :ignore-failure-p ignore-failure-p
                           :compile-file (if assem-p
                                             *target-assemble-file*
                                             *target-compile-file*)))))
(compile 'target-compile-stem)

;;; (This function is not used by the build process, but is intended
;;; for interactive use when experimenting with the system. It runs
;;; the cross-compiler on test files with arbitrary filenames, not
;;; necessarily in the source tree, e.g. in "/tmp".)
(defun target-compile-file (filename)
  (funcall *in-target-compilation-mode-fn*
           (lambda ()
             (funcall *target-compile-file* filename))))
(compile 'target-compile-file)