| blob | b8b00544c4cddf5b1c632beafdbe0a706ac3234e |
1 ;;;; This file implements the IR1 optimization phase of the compiler.
2 ;;;; IR1 optimization is a grab-bag of optimizations that don't make
3 ;;;; major changes to the block-level control flow and don't use flow
4 ;;;; analysis. These optimizations can mostly be classified as
5 ;;;; "meta-evaluation", but there is a sizable top-down component as
6 ;;;; well.
8 ;;;; This software is part of the SBCL system. See the README file for
9 ;;;; more information.
10 ;;;;
11 ;;;; This software is derived from the CMU CL system, which was
12 ;;;; written at Carnegie Mellon University and released into the
13 ;;;; public domain. The software is in the public domain and is
14 ;;;; provided with absolutely no warranty. See the COPYING and CREDITS
15 ;;;; files for more information.
18 \f
19 ;;;; interface for obtaining results of constant folding
21 ;;; Return true for an LVAR whose sole use is a reference to a
22 ;;; constant leaf.
29 ;;; Return the constant value for an LVAR whose only use is a constant
30 ;;; node.
35 \f
36 ;;;; interface for obtaining results of type inference
38 ;;; Our best guess for the type of this lvar's value. Note that this
39 ;;; may be VALUES or FUNCTION type, which cannot be passed as an
40 ;;; argument to the normal type operations. See LVAR-TYPE.
41 ;;;
42 ;;; The result value is cached in the LVAR-%DERIVED-TYPE slot. If the
43 ;;; slot is true, just return that value, otherwise recompute and
44 ;;; stash the value there.
58 res))
61 res)))
65 ;;; Return the derived type for LVAR's first value. This is guaranteed
66 ;;; not to be a VALUES or FUNCTION type.
71 ;;; If LVAR is an argument of a function, return a type which the
72 ;;; function checks LVAR for.
81 ;; TODO: MV-COMBINATION
89 ;; FUN-TYPE might be (AND FUNCTION (SATISFIES ...)).
102 dest)))))
108 \f
109 ;;;; interface routines used by optimizers
119 ;;; This function is called by optimizers to indicate that something
120 ;;; interesting has happened to the value of LVAR. Optimizers must
121 ;;; make sure that they don't call for reoptimization when nothing has
122 ;;; happened, since optimization will fail to terminate.
123 ;;;
124 ;;; We clear any cached type for the lvar and set the reoptimize flags
125 ;;; on everything in sight.
135 ;; PREV may be missing.
154 ;;; Annotate NODE to indicate that its result has been proven to be
155 ;;; TYPEP to RTYPE. After IR1 conversion has happened, this is the
156 ;;; only correct way to supply information discovered about a node's
157 ;;; type. If you screw with the NODE-DERIVED-TYPE directly, then
158 ;;; information may be lost and reoptimization may not happen.
159 ;;;
160 ;;; What we do is intersect RTYPE with NODE's DERIVED-TYPE. If the
161 ;;; intersection is different from the old type, then we do a
162 ;;; REOPTIMIZE-LVAR on the NODE-LVAR.
175 "New inferred type ~S conflicts with old type:~
176 ~% ~S~%*** possible internal error? Please report this."
179 ;; If the new type consists of only one object, replace the
180 ;; node with a constant reference.
191 ;;; This is similar to DERIVE-NODE-TYPE, but asserts that it is an
192 ;;; error for LVAR's value not to be TYPEP to TYPE. We implement it
193 ;;; splitting off DEST a new CAST node; old LVAR will deliver values
194 ;;; to CAST. If we improve the assertion, we set TYPE-CHECK and
195 ;;; TYPE-ASSERTED to guarantee that the new assertion will be checked.
206 \f
207 ;;;; IR1-OPTIMIZE
209 ;;; Do one forward pass over COMPONENT, deleting unreachable blocks
210 ;;; and doing IR1 optimizations. We can ignore all blocks that don't
211 ;;; have the REOPTIMIZE flag set. If COMPONENT-REOPTIMIZE is true when
212 ;;; we are done, then another iteration would be beneficial.
218 for last-block = block
221 ;; We delete blocks when there is either no predecessor or the
222 ;; block is in a lambda that has been deleted. These blocks
223 ;; would eventually be deleted by DFO recomputation, but doing
224 ;; it here immediately makes the effect available to IR1
225 ;; optimization.
231 ;; Preserve the BLOCK-SUCC invariant that almost every block has
232 ;; one successor (and a block with DELETE-P set is an acceptable
233 ;; exception).
268 ;;; Loop over the nodes in BLOCK, acting on (and clearing) REOPTIMIZE
269 ;;; flags.
270 ;;;
271 ;;; Note that although they are cleared here, REOPTIMIZE flags might
272 ;;; still be set upon return from this function, meaning that further
273 ;;; optimization is wanted (as a consequence of optimizations we did).
276 ;; We clear the node and block REOPTIMIZE flags before doing the
277 ;; optimization, not after. This ensures that the node or block will
278 ;; be reoptimized if necessary.
282 ;; As above, we clear the node REOPTIMIZE flag before optimizing.
287 ;; With a COMBINATION, we call PROPAGATE-FUN-CHANGE whenever
288 ;; the function changes, and call IR1-OPTIMIZE-COMBINATION if
289 ;; any argument changes.
294 ;; KLUDGE: We leave the NODE-OPTIMIZE flag set going into
295 ;; IR1-OPTIMIZE-RETURN, since IR1-OPTIMIZE-RETURN wants to
296 ;; clear the flag itself. -- WHN 2002-02-02, quoting original
297 ;; CMU CL comments
303 ;; With an EXIT, we derive the node's type from the VALUE's
304 ;; type.
309 ;; PROPAGATE-FROM-SETS can do a better job if NODE-REOPTIMIZE
310 ;; is accurate till the node actually has been reoptimized.
318 ;;; Try to join with a successor block. If we succeed, we return true,
319 ;;; otherwise false.
326 ;; the successor has more than one predecessor;
328 ;; the successor is the current block (infinite loop);
330 ;; the next block has a different cleanup, and thus
331 ;; we may want to insert cleanup code between the
332 ;; two blocks at some point;
335 ;; the next block has a different home lambda, and
336 ;; thus the control transfer is a non-local exit.
339 ;; Stack analysis phase wants ENTRY to start a block...
345 ;; ... and a DX-allocator to end a block.
347 ;; FIXME: This is a partial workaround for bug 303.
349 nil)
352 t)))))
354 ;;; Join together two blocks. The code in BLOCK2 is moved into BLOCK1
355 ;;; and BLOCK2 is deleted from the DFO. We combine the optimize flags
356 ;;; for the two blocks so that any indicated optimization gets done.
389 ;;; Delete any nodes in BLOCK whose value is unused and which have no
390 ;;; side effects. We can delete sets of lexical variables when the set
391 ;;; variable has no references.
407 ;; ### For now, don't delete potentially
408 ;; flushable calls when they have the CALL
409 ;; attribute. Someday we should look at the
410 ;; functional args to determine if they have
411 ;; any side effects.
444 \f
445 ;;;; local call return type propagation
447 ;;; This function is called on RETURN nodes that have their REOPTIMIZE
448 ;;; flag set. It iterates over the uses of the RESULT, looking for
449 ;;; interesting stuff to update the TAIL-SET. If a use isn't a local
450 ;;; call, then we union its type together with the types of other such
451 ;;; uses. We assign to the RETURN-RESULT-TYPE the intersection of this
452 ;;; type with the RESULT's asserted type. We can make this
453 ;;; intersection now (potentially before type checking) because this
454 ;;; assertion on the result will eventually be checked (if
455 ;;; appropriate.)
456 ;;;
457 ;;; We call MAYBE-CONVERT-TAIL-LOCAL-CALL on each local non-MV
458 ;;; combination, which may change the successor of the call to be the
459 ;;; called function, and if so, checks if the call can become an
460 ;;; assignment. If we convert to an assignment, we abort, since the
461 ;;; RETURN has been deleted.
480 ;; (values-type-intersection
481 ;; (continuation-asserted-type result) ; FIXME -- APD, 2002-01-26
483 ;; )
484 ))
486 nil)
488 ;;; Do stuff to realize that something has changed about the value
489 ;;; delivered to a return node. Since we consider the return values of
490 ;;; all functions in the tail set to be equivalent, this amounts to
491 ;;; bringing the entire tail set up to date. We iterate over the
492 ;;; returns for all the functions in the tail set, reanalyzing them
493 ;;; all (not treating NODE specially.)
494 ;;;
495 ;;; When we are done, we check whether the new type is different from
496 ;;; the old TAIL-SET-TYPE. If so, we set the type and also reoptimize
497 ;;; all the lvars for references to functions in the tail set. This
498 ;;; will cause IR1-OPTIMIZE-COMBINATION to derive the new type as the
499 ;;; results of the calls.
503 :restart
523 \f
524 ;;;; IF optimization
526 ;;; If the test has multiple uses, replicate the node when possible.
527 ;;; Also check whether the predicate is known to be true or false,
528 ;;; deleting the IF node in favor of the appropriate branch when this
529 ;;; is the case.
560 ;;; Create a new copy of an IF node that tests the value of the node
561 ;;; USE. The test must have >1 use, and must be immediately used by
562 ;;; USE. NODE must be the only node in its block (implying that
563 ;;; block-start = if-test).
564 ;;;
565 ;;; This optimization has an effect semantically similar to the
566 ;;; source-to-source transformation:
567 ;;; (IF (IF A B C) D E) ==>
568 ;;; (IF A (IF B D E) (IF C D E))
569 ;;;
570 ;;; We clobber the NODE-SOURCE-PATH of both the original and the new
571 ;;; node so that dead code deletion notes will definitely not consider
572 ;;; either node to be part of the original source. One node might
573 ;;; become unreachable, resulting in a spurious note.
585 :consequent cblock
607 \f
608 ;;;; exit IR1 optimization
610 ;;; This function attempts to delete an exit node, returning true if
611 ;;; it deletes the block as a consequence:
612 ;;; -- If the exit is degenerate (has no ENTRY), then we don't do
613 ;;; anything, since there is nothing to be done.
614 ;;; -- If the exit node and its ENTRY have the same home lambda then
615 ;;; we know the exit is local, and can delete the exit. We change
616 ;;; uses of the Exit-Value to be uses of the original lvar,
617 ;;; then unlink the node. If the exit is to a TR context, then we
618 ;;; must do MERGE-TAIL-SETS on any local calls which delivered
619 ;;; their value to this exit.
620 ;;; -- If there is no value (as in a GO), then we skip the value
621 ;;; semantics.
622 ;;;
623 ;;; This function is also called by environment analysis, since it
624 ;;; wants all exits to be optimized even if normal optimization was
625 ;;; omitted.
637 \f
638 ;;;; combination IR1 optimization
640 ;;; Report as we try each transform?
641 #!+sb-show
649 "The return value of ~A should not be discarded."
652 ;;; Do IR1 optimizations on a COMBINATION node.
662 (:local
667 (:error
671 (:full
693 (:known
701 ;; If somebody is really sure that they want to modify
702 ;; constants, let them.
715 ;; KLUDGE: The next test could be made more sensitive,
716 ;; only suppressing constant-folding of functions with
717 ;; CALL attributes when they're actually passed
718 ;; function arguments. -- WHN 19990918
734 ;; First give the VM a peek at the call
738 (:direct
739 ;; The VM knows how to handle this.
740 )
741 (:transform
742 ;; The VM mostly knows how to handle this. We need
743 ;; to massage the call slightly, though.
745 (:default
746 ;; Let transforms have a crack at it.
748 #!+sb-show
754 #!+sb-show
761 ;;; If NODE doesn't return (i.e. return type is NIL), then terminate
762 ;;; the block there, and link it to the component tail.
763 ;;;
764 ;;; Except when called during IR1 convertion, we delete the
765 ;;; continuation if it has no other uses. (If it does have other uses,
766 ;;; we reoptimize.)
767 ;;;
768 ;;; Termination on the basis of a continuation type is
769 ;;; inhibited when:
770 ;;; -- The continuation is deleted (hence the assertion is spurious), or
771 ;;; -- We are in IR1 conversion (where THE assertions are subject to
772 ;;; weakening.) FIXME: Now THE assertions are not weakened, but new
773 ;;; uses can(?) be added later. -- APD, 2003-07-17
774 ;;;
775 ;;; Why do we need to consider LVAR type? -- APD, 2003-07-30
811 t))))
813 ;;; This is called both by IR1 conversion and IR1 optimization when
814 ;;; they have verified the type signature for the call, and are
815 ;;; wondering if something should be done to special-case the call. If
816 ;;; CALL is a call to a global function, then see whether it defined
817 ;;; or known:
818 ;;; -- If a DEFINED-FUN should be inline expanded, then convert
819 ;;; the expansion and change the call to call it. Expansion is
820 ;;; enabled if :INLINE or if SPACE=0. If the FUNCTIONAL slot is
821 ;;; true, we never expand, since this function has already been
822 ;;; converted. Local call analysis will duplicate the definition
823 ;;; if necessary. We claim that the parent form is LABELS for
824 ;;; context declarations, since we don't want it to be considered
825 ;;; a real global function.
826 ;;; -- If it is a known function, mark it as such by setting the KIND.
827 ;;;
828 ;;; We return the leaf referenced (NIL if not a leaf) and the
829 ;;; FUN-INFO assigned.
857 ;; called semi-inlining? A more descriptive name would
858 ;; be nice. -- WHN 2002-01-07
862 name
864 leaf
865 inlinep
867 ;; allow backward references to this function from
868 ;; following top level forms
878 nil))
888 ;;; Check whether CALL satisfies TYPE. If so, apply the type to the
889 ;;; call, and do MAYBE-TERMINATE-BLOCK and return the values of
890 ;;; RECOGNIZE-KNOWN-CALL. If an error, set the combination kind and
891 ;;; return NIL, NIL. If the type is just FUNCTION, then skip the
892 ;;; syntax check, arg/result type processing, but still call
893 ;;; RECOGNIZE-KNOWN-CALL, since the call might be to a known lambda,
894 ;;; and that checking is done by local call analysis.
901 ;; In the commonish case where the function has been defined
902 ;; in another file, we only get FUNCTION for the type; but we
903 ;; can check whether the current call is valid for the
904 ;; existing definition, even if only to STYLE-WARN about it.
908 :result-test nil
914 :result-test nil
915 ;; KLUDGE: Common Lisp is such a dynamic
916 ;; language that all we can do here in
917 ;; general is issue a STYLE-WARNING. It
918 ;; would be nice to issue a full WARNING
919 ;; in the special case of of type
920 ;; mismatches within a compilation unit
921 ;; (as in section 3.2.2.3 of the spec)
922 ;; but at least as of sbcl-0.6.11, we
923 ;; don't keep track of whether the
924 ;; mismatched data came from the same
925 ;; compilation unit, so we can't do that.
926 ;; -- WHN 2001-02-11
927 ;;
928 ;; FIXME: Actually, I think we could
929 ;; issue a full WARNING if the call
930 ;; violates a DECLAIM FTYPE.
940 ;;; This is called by IR1-OPTIMIZE when the function for a call has
941 ;;; changed. If the call is local, we try to LET-convert it, and
942 ;;; derive the result type. If it is a :FULL call, we validate it
943 ;;; against the type, which recognizes known calls, does inline
944 ;;; expansion, etc. If a call to a predicate in a non-conditional
945 ;;; position or to a function with a source transform, then we
946 ;;; reconvert the form to give IR1 another chance.
953 (:local
958 (:full
964 call))
972 predicate)
986 \f
987 ;;;; known function optimization
989 ;;; Add a failed optimization note to FAILED-OPTIMZATIONS for NODE,
990 ;;; FUN and ARGS. If there is already a note for NODE and TRANSFORM,
991 ;;; replace it, otherwise add a new one.
1002 ;;; Attempt to transform NODE using TRANSFORM-FUNCTION, subject to the
1003 ;;; call type constraint TRANSFORM-TYPE. If we are inhibited from
1004 ;;; doing the transform for some reason and FLAME is true, then we
1005 ;;; make a note of the message in FAILED-OPTIMIZATIONS for IR1
1006 ;;; finalize to pick up. We return true if the transform failed, and
1007 ;;; thus further transformation should be attempted. We return false
1008 ;;; if either the transform succeeded or was aborted.
1028 (:none
1030 nil)
1031 (:aborted
1036 nil)
1037 (:failure
1043 t)
1044 (:delayed
1046 nil))))
1049 type
1053 t)
1055 t))))
1057 ;;; When we don't like an IR1 transform, we throw the severity/reason
1058 ;;; and args.
1059 ;;;
1060 ;;; GIVE-UP-IR1-TRANSFORM is used to throw out of an IR1 transform,
1061 ;;; aborting this attempt to transform the call, but admitting the
1062 ;;; possibility that this or some other transform will later succeed.
1063 ;;; If arguments are supplied, they are format arguments for an
1064 ;;; efficiency note.
1065 ;;;
1066 ;;; ABORT-IR1-TRANSFORM is used to throw out of an IR1 transform and
1067 ;;; force a normal call to the function at run time. No further
1068 ;;; optimizations will be attempted.
1069 ;;;
1070 ;;; DELAY-IR1-TRANSFORM is used to throw out of an IR1 transform, and
1071 ;;; delay the transform on the node until later. REASONS specifies
1072 ;;; when the transform will be later retried. The :OPTIMIZE reason
1073 ;;; causes the transform to be delayed until after the current IR1
1074 ;;; optimization pass. The :CONSTRAINT reason causes the transform to
1075 ;;; be delayed until after constraint propagation.
1076 ;;;
1077 ;;; FIXME: Now (0.6.11.44) that there are 4 variants of this (GIVE-UP,
1078 ;;; ABORT, DELAY/:OPTIMIZE, DELAY/:CONSTRAINT) and we're starting to
1079 ;;; do CASE operations on the various REASON values, it might be a
1080 ;;; good idea to go OO, representing the reasons by objects, using
1081 ;;; CLOS methods on the objects instead of CASE, and (possibly) using
1082 ;;; SIGNAL instead of THROW.
1099 ;;; Clear any delayed transform with no reasons - these should have
1100 ;;; been tried in the last pass. Then remove the reason from the
1101 ;;; delayed transform reasons, and if any become empty then set
1102 ;;; reoptimize flags for the node. Return true if any transforms are
1103 ;;; to be retried.
1119 reoptimize))
1121 ;;; Take the lambda-expression RES, IR1 convert it in the proper
1122 ;;; environment, and then install it as the function for the call
1123 ;;; NODE. We do local call analysis so that the new function is
1124 ;;; integrated into the control flow.
1125 ;;;
1126 ;;; We require the original function source name in order to generate
1127 ;;; a meaningful debug name for the lambda we set up. (It'd be
1128 ;;; possible to do this starting from debug names as well as source
1129 ;;; names, but as of sbcl-0.7.1.5, there was no need for this
1130 ;;; generality, since source names are always known to our callers.)
1136 ;; The internal variables of a transform are not going to be
1137 ;; interesting to the debugger, so there's no sense in
1138 ;; suppressing the substitution of variables with only one use
1139 ;; (the extra variables can slow down constraint propagation).
1140 ;;
1141 ;; This needs to be done before the WITH-IR1-ENVIRONMENT-FROM-NODE,
1142 ;; so that it will bind *LEXENV* to the right environment.
1155 res
1164 ;;; Replace a call to a foldable function of constant arguments with
1165 ;;; the result of evaluating the form. If there is an error during the
1166 ;;; evaluation, we give a warning and leave the call alone, making the
1167 ;;; call a :ERROR call.
1168 ;;;
1169 ;;; If there is more than one value, then we transform the call into a
1170 ;;; VALUES form.
1176 args
1177 call
1178 ;; Note: CMU CL had COMPILER-WARN here, and that
1179 ;; seems more natural, but it's probably not.
1180 ;;
1181 ;; It's especially not while bug 173 exists:
1182 ;; Expressions like
1183 ;; (COND (END
1184 ;; (UNLESS (OR UNSAFE? (<= END SIZE)))
1185 ;; ...))
1186 ;; can cause constant-folding TYPE-ERRORs (in
1187 ;; #'<=) when END can be proved to be NIL, even
1188 ;; though the code is perfectly legal and safe
1189 ;; because a NIL value of END means that the
1190 ;; #'<= will never be executed.
1191 ;;
1192 ;; Moreover, even without bug 173,
1193 ;; quite-possibly-valid code like
1194 ;; (COND ((NONINLINED-PREDICATE END)
1195 ;; (UNLESS (<= END SIZE))
1196 ;; ...))
1197 ;; (where NONINLINED-PREDICATE is something the
1198 ;; compiler can't do at compile time, but which
1199 ;; turns out to make the #'<= expression
1200 ;; unreachable when END=NIL) could cause errors
1201 ;; when the compiler tries to constant-fold (<=
1202 ;; END SIZE).
1203 ;;
1204 ;; So, with or without bug 173, it'd be
1205 ;; unnecessarily evil to do a full
1206 ;; COMPILER-WARNING (and thus return FAILURE-P=T
1207 ;; from COMPILE-FILE) for legal code, so we we
1208 ;; use a wimpier COMPILE-STYLE-WARNING instead.
1210 ;; On the other hand, for code we control, we
1211 ;; should be able to work around any bug
1212 ;; 173-related problems, and in particular we
1213 ;; want to be alerted to calls to our own
1214 ;; functions which aren't being folded away; a
1215 ;; COMPILER-WARNING is butch enough to stop the
1216 ;; SBCL build itself in its tracks.
1236 call
1240 fun-name))))))
1242 \f
1243 ;;;; local call optimization
1245 ;;; Propagate TYPE to LEAF and its REFS, marking things changed. If
1246 ;;; the leaf type is a function type, then just leave it alone, since
1247 ;;; TYPE is never going to be more specific than that (and
1248 ;;; TYPE-INTERSECTION would choke.)
1259 ;; KLUDGE: LET var substitution
1265 ;;; Iteration variable: exactly one SETQ of the form:
1266 ;;;
1267 ;;; (let ((var initial))
1268 ;;; ...
1269 ;;; (setq var (+ var step))
1270 ;;; ...)
1296 ;; Detect cases like (LOOP FOR 1.0 to 5.0 ...), where
1297 ;; the initial and the step are of different types,
1298 ;; and the step is less contagious.
1301 step-type))))
1340 :low low
1341 :high high
1344 "check for iteration variable reoptimization"
1354 ;;; Figure out the type of a LET variable that has sets. We compute
1355 ;;; the union of the INITIAL-TYPE and the types of all the set
1356 ;;; values and to a PROPAGATE-TO-REFS with this type.
1376 ;;; If a LET variable, find the initial value's type and do
1377 ;;; PROPAGATE-FROM-SETS. We also derive the VALUE's type as the node's
1378 ;;; type.
1394 ;;; Return true if the value of REF will always be the same (and is
1395 ;;; thus legal to substitute.)
1407 (:global-function
1414 ;;; If we have a non-set LET var with a single use, then (if possible)
1415 ;;; replace the variable reference's LVAR with the arg lvar.
1416 ;;;
1417 ;;; We change the REF to be a reference to NIL with unused value, and
1418 ;;; let it be flushed as dead code. A side effect of this substitution
1419 ;;; is to delete the variable.
1426 ;; Think about (LET ((A ...)) (IF ... A ...)): two
1427 ;; LVAR-USEs should not be met on one path. Another problem
1428 ;; is with dynamic-extent.
1432 ;; we should not change lifetime of unknown values lvars
1444 ;; While CRETURN and EXIT nodes may be known-values,
1445 ;; they have their own complications, such as
1446 ;; substitution into CRETURN may create new tail calls.
1447 nil)
1450 t))
1456 ;; Really it is (EQ (LVAR-USES LVAR) REF):
1457 t)
1462 ;; KLUDGE: it should be (TYPE-CHECK 0)
1466 ;; FIXME
1467 t)
1475 t)))
1477 ;;; Delete a LET, removing the call and bind nodes, and warning about
1478 ;;; any unreferenced variables. Note that FLUSH-DEAD-CODE will come
1479 ;;; along right away and delete the REF and then the lambda, since we
1480 ;;; flush the FUN lvar.
1495 ;;; This function is called when one of the arguments to a LET
1496 ;;; changes. We look at each changed argument. If the corresponding
1497 ;;; variable is set, then we call PROPAGATE-FROM-SETS. Otherwise, we
1498 ;;; consider substituting for the variable, and also propagate
1499 ;;; derived-type information for the arg to all the VAR's refs.
1500 ;;;
1501 ;;; Substitution is inhibited when the arg leaf's derived type isn't a
1502 ;;; subtype of the argument's leaf type. This prevents type checking
1503 ;;; from being defeated, and also ensures that the best representation
1504 ;;; for the variable can be used.
1505 ;;;
1506 ;;; Substitution of individual references is inhibited if the
1507 ;;; reference is in a different component from the home. This can only
1508 ;;; happen with closures over top level lambda vars. In such cases,
1509 ;;; the references may have already been compiled, and thus can't be
1510 ;;; retroactively modified.
1511 ;;;
1512 ;;; If all of the variables are deleted (have no references) when we
1513 ;;; are done, then we delete the LET.
1514 ;;;
1515 ;;; Note that we are responsible for clearing the LVAR-REOPTIMIZE
1516 ;;; flags.
1531 ;; (NODE-DERIVED-TYPE USE) would
1532 ;; be better -- APD, 2003-05-15
1539 t)
1542 nil)))
1543 leaf var)))
1544 t)))))
1546 ;; Don't substitute single-ref variables on high-debug /
1547 ;; low speed, to improve the debugging experience.
1558 ;;; This function is called when one of the args to a non-LET local
1559 ;;; call changes. For each changed argument corresponding to an unset
1560 ;;; variable, we compute the union of the types across all calls and
1561 ;;; propagate this type information to the var's refs.
1562 ;;;
1563 ;;; If the function has an XEP, then we don't do anything, since we
1564 ;;; won't discover anything.
1565 ;;;
1566 ;;; We can clear the LVAR-REOPTIMIZE flags for arguments in all calls
1567 ;;; corresponding to changed arguments in CALL, since the only use in
1568 ;;; IR1 optimization of the REOPTIMIZE flag for local call args is
1569 ;;; right here.
1581 vars))
1597 union)))))
1600 and type in union
1604 \f
1605 ;;;; multiple values optimization
1607 ;;; Do stuff to notice a change to a MV combination node. There are
1608 ;;; two main branches here:
1609 ;;; -- If the call is local, then it is already a MV let, or should
1610 ;;; become one. Note that although all :LOCAL MV calls must eventually
1611 ;;; be converted to :MV-LETs, there can be a window when the call
1612 ;;; is local, but has not been LET converted yet. This is because
1613 ;;; the entry-point lambdas may have stray references (in other
1614 ;;; entry points) that have not been deleted yet.
1615 ;;; -- The call is full. This case is somewhat similar to the non-MV
1616 ;;; combination optimization: we propagate return type information and
1617 ;;; notice non-returning calls. We also have an optimization
1618 ;;; which tries to convert MV-CALLs into MV-binds.
1621 (:local
1630 (:full
1653 ;;; Propagate derived type info from the values lvar to the vars.
1660 n-vars)))
1662 and type in types
1669 ;;; If possible, convert a general MV call to an MV-BIND. We can do
1670 ;;; this if:
1671 ;;; -- The call has only one argument, and
1672 ;;; -- The function has a known fixed number of arguments, or
1673 ;;; -- The argument yields a known fixed number of values.
1674 ;;;
1675 ;;; What we do is change the function in the MV-CALL to be a lambda
1676 ;;; that "looks like an MV bind", which allows
1677 ;;; IR1-OPTIMIZE-MV-COMBINATION to notice that this call can be
1678 ;;; converted (the next time around.) This new lambda just calls the
1679 ;;; actual function with the MV-BIND variables as arguments. Note that
1680 ;;; this new MV bind is not let-converted immediately, as there are
1681 ;;; going to be stray references from the entry-point functions until
1682 ;;; they get deleted.
1683 ;;;
1684 ;;; In order to avoid loss of argument count checking, we only do the
1685 ;;; transformation according to a known number of expected argument if
1686 ;;; safety is unimportant. We can always convert if we know the number
1687 ;;; of actual values, since the normal call that we build will still
1688 ;;; do any appropriate argument count checking.
1689 ;;;
1690 ;;; We only attempt the transformation if the called function is a
1691 ;;; constant reference. This allows us to just splice the leaf into
1692 ;;; the new function, instead of trying to somehow bind the function
1693 ;;; expression. The leaf must be constant because we are evaluating it
1694 ;;; again in a different place. This also has the effect of squelching
1695 ;;; multiple warnings when there is an argument count error.
1717 "MULTIPLE-VALUE-CALL with ~R values when the function expects ~
1718 at least ~R."
1719 total-nvals min)
1724 "MULTIPLE-VALUE-CALL with ~R values when the function expects ~
1725 at most ~R."
1726 total-nvals max)
1733 min)
1752 ;;; If we see:
1753 ;;; (multiple-value-bind
1754 ;;; (x y)
1755 ;;; (values xx yy)
1756 ;;; ...)
1757 ;;; Convert to:
1758 ;;; (let ((x xx)
1759 ;;; (y yy))
1760 ;;; ...)
1761 ;;;
1762 ;;; What we actually do is convert the VALUES combination into a
1763 ;;; normal LET combination calling the original :MV-LET lambda. If
1764 ;;; there are extra args to VALUES, discard the corresponding
1765 ;;; lvars. If there are insufficient args, insert references to NIL.
1788 for prev = node-prev then ctran
1794 use ctran))
1810 t)))
1812 ;;; If we see:
1813 ;;; (values-list (list x y z))
1814 ;;;
1815 ;;; Convert to:
1816 ;;; (values x y z)
1817 ;;;
1818 ;;; In implementation, this is somewhat similar to
1819 ;;; CONVERT-MV-BIND-TO-LET. We grab the args of LIST and make them
1820 ;;; args of the VALUES-LIST call, flushing the old argument lvar
1821 ;;; (allowing the LIST to be flushed.)
1822 ;;;
1823 ;;; FIXME: Thus we lose possible type assertions on (LIST ...).
1830 ;; FIXME: VALUES might not satisfy an assertion on NODE-LVAR.
1841 t)))
1843 ;;; If VALUES appears in a non-MV context, then effectively convert it
1844 ;;; to a PROG1. This allows the computation of the additional values
1845 ;;; to become dead code.
1857 val))
1858 nil))
1860 ;;; TODO:
1861 ;;; - CAST chains;
1885 lvar)
1886 ;; Pathwise removing of CAST
1889 next-block)
1917 ;; FIXME: Do it in one step.
1919 value
1925 ;; FIXME: Derived type.
1929 ;; KLUDGE: FILTER-LVAR does not work for non-returning
1930 ;; functions, so we declare the return type of
1931 ;; %COMPILE-TIME-TYPE-ERROR to be * and derive the real type
1932 ;; here.
1936 ;; FIXME: Is it necessary?