make-host-2.lisp

   1 ;;; Set up the cross-compiler.
   2 (setf *print-level* 5 *print-length* 5)
   3 (load "src/cold/shared.lisp")
   4 (in-package "SB-COLD")
   5 ;;; FIXME: these prefixes look like non-pathnamy ways of defining a
   6 ;;; relative pathname.  Investigate whether they can be made relative
   7 ;;; pathnames.
   8 (setf *host-obj-prefix* "obj/from-host/"
   9       *target-obj-prefix* "obj/from-xc/")
  10 (load "src/cold/set-up-cold-packages.lisp")
  11 (load "src/cold/defun-load-or-cload-xcompiler.lisp")
  12 (load-or-cload-xcompiler #'host-load-stem)
  13
  14 (let ((*features* (cons :sb-xc *features*)))
  15   (load "src/cold/muffler.lisp"))
  16
  17 ;; Avoid forward-reference to an as-yet unknown type.
  18 ;; NB: This is not how you would write this function, if you required
  19 ;; such a thing. It should be (TYPEP X 'CODE-DELETION-NOTE).
  20 ;; Do as I say, not as I do.
  21 (defun code-deletion-note-p (x)
  22   (eq (type-of x) 'sb!ext:code-deletion-note))
  23 (setq sb!c::*handled-conditions*
  24       `((,(sb!kernel:specifier-type
  25            '(or (satisfies unable-to-optimize-note-p)
  26                 (satisfies code-deletion-note-p)))
  27          . muffle-warning)))
  28
  29 (defun proclaim-target-optimization ()
  30   (let ((debug (if (position :sb-show *shebang-features*) 2 1)))
  31     (sb-xc:proclaim
  32      `(optimize
  33        (compilation-speed 1) (debug ,debug)
  34        ;; CLISP's pretty-printer is fragile and tends to cause stack
  35        ;; corruption or fail internal assertions, as of 2003-04-20; we
  36        ;; therefore turn off as many notes as possible.
  37        (sb!ext:inhibit-warnings #-clisp 2 #+clisp 3)
  38        ;; SAFETY = SPEED (and < 3) should provide reasonable safety,
  39        ;; but might skip some unreasonably expensive stuff
  40        ;; (e.g. %DETECT-STACK-EXHAUSTION in sbcl-0.7.2).
  41        (safety 2) (space 1) (speed 2)
  42        ;; sbcl-internal optimization declarations:
  43        ;;
  44        ;; never insert stepper conditions
  45        (sb!c:insert-step-conditions 0)
  46        ;; save FP and PC for alien calls -- or not
  47        (sb!c:alien-funcall-saves-fp-and-pc #!+x86 3 #!-x86 0)))))
  48 (compile 'proclaim-target-optimization)
  49
  50 (defun in-target-cross-compilation-mode (fun)
  51   "Call FUN with everything set up appropriately for cross-compiling
  52    a target file."
  53   (let (;; In order to increase microefficiency of the target Lisp,
  54         ;; enable old CMU CL defined-function-types-never-change
  55         ;; optimizations. (ANSI says users aren't supposed to
  56         ;; redefine our functions anyway; and developers can
  57         ;; fend for themselves.)
  58         #!-sb-fluid
  59         (sb!ext:*derive-function-types* t)
  60         ;; Let the target know that we're the cross-compiler.
  61         (*features* (cons :sb-xc *features*))
  62         ;; We need to tweak the readtable..
  63         (*readtable* (copy-readtable)))
  64     ;; ..in order to make backquotes expand into target code
  65     ;; instead of host code.
  66     ;; FIXME: Isn't this now taken care of automatically by
  67     ;; toplevel forms in the xcompiler backq.lisp file?
  68     (set-macro-character #\` #'sb!impl::backquote-charmacro)
  69     (set-macro-character #\, #'sb!impl::comma-charmacro)
  70
  71     (set-dispatch-macro-character #\# #\+ #'she-reader)
  72     (set-dispatch-macro-character #\# #\- #'she-reader)
  73     ;; Control optimization policy.
  74     (proclaim-target-optimization)
  75     ;; Specify where target machinery lives.
  76     (with-additional-nickname ("SB-XC" "SB!XC")
  77       (funcall fun))))
  78 (compile 'in-target-cross-compilation-mode)
  79
  80
  81 ;; Supress function/macro redefinition warnings under clisp.
  82 #+clisp (setf custom:*suppress-check-redefinition* t)
  83
  84 (setf *target-compile-file* #'sb-xc:compile-file)
  85 (setf *target-assemble-file* #'sb!c:assemble-file)
  86 (setf *in-target-compilation-mode-fn* #'in-target-cross-compilation-mode)
  87 \f
  88 ;;; Run the cross-compiler to produce cold fasl files.
  89 ;; ... and since the cross-compiler hasn't seen a DEFMACRO for QUASIQUOTE,
  90 ;; make it think it has, otherwise it fails more-or-less immediately.
  91 (setf (sb!int:info :function :kind 'sb!int:quasiquote) :macro
  92       (sb!int:info :function :macro-function 'sb!int:quasiquote)
  93       (cl:macro-function 'sb!int:quasiquote))
  94 (setq sb!c::*track-full-called-fnames* :minimal) ; Change this as desired
  95 (progn ; Should be: sb-xc:with-compilation-unit () ... but
  96   ;; leaving aside the question of building in any host - which shouldn't
  97   ;; matter - building SBCL in SBCL can hang in a way I haven't tracked down.
  98   (load "src/cold/compile-cold-sbcl.lisp"))
  99
 100 (when sb!c::*track-full-called-fnames*
 101   (let (possibly-suspicious likely-suspicious)
 102     (sb!c::call-with-each-globaldb-name
 103      (lambda (name)
 104        (let* ((cell (sb!int:info :function :emitted-full-calls name))
 105               (inlinep (eq (sb!int:info :function :inlinep name) :inline))
 106               (info (sb!int:info :function :info name)))
 107          (if (and cell
 108                   (or inlinep
 109                       (and info (sb!c::fun-info-templates info))
 110                       (sb!int:info :function :compiler-macro-function name)
 111                       (sb!int:info :function :source-transform name)))
 112              (if inlinep
 113                  ;; A full call to an inline function almost always indicates
 114                  ;; an out-of-order definition. If not an inline function,
 115                  ;; the call could be due to an inapplicable transformation.
 116                  (push (cons name cell) likely-suspicious)
 117                  (push (cons name cell) possibly-suspicious))))))
 118     (flet ((show (label list)
 119              (format t "~%~A suspicious calls:~:{~%~*~4d ~0@*~S~*~@{~%     ~S~}~}~%"
 120                      label (sort list #'> :key #'cadr))))
 121       ;; Called inlines not in the presence of a declaration to the contrary
 122       ;; indicate that perhaps the function definition appeared too late.
 123       (show "Likely" likely-suspicious)
 124       ;; Failed transforms are considered not quite as suspicious
 125       ;; because it could either be too late, or that the transform failed.
 126       (show "Possibly" possibly-suspicious))))
 127
 128 ;; After cross-compiling, show me a list of types that checkgen
 129 ;; would have liked to use primitive traps for but couldn't.
 130 #+nil
 131 (let ((l (sb-impl::%hash-table-alist sb!c::*checkgen-used-types*)))
 132   (format t "~&Types needed by checkgen: ('+' = has internal error number)~%")
 133   (setq l (sort l #'> :key #'cadr))
 134   (loop for (type-spec . (count . interr-p)) in l
 135         do (format t "~:[ ~;+~] ~5D ~S~%" interr-p count type-spec))
 136   (format t "~&Error numbers not used by checkgen:~%")
 137   (loop for (spec . symbol) across sb!c:+backend-internal-errors+
 138         when (and (not (stringp spec))
 139                   (not (gethash spec sb!c::*checkgen-used-types*)))
 140         do (format t "       ~S~%" spec)))
 141
 142 ;; Print some information about how well the function caches performed
 143 (when sb!impl::*profile-hash-cache*
 144   (sb!impl::show-hash-cache-statistics))
 145 #|
 146 Sample output
 147 -------------
 148      Seek       Hit      (%)    Evict      (%) Size    full
 149  23698219  18382256 ( 77.6%)  5313915 ( 22.4%) 2048  100.0% TYPE=-CACHE
 150  23528751  23416735 ( 99.5%)    46242 (  0.2%) 1024   20.1% VALUES-SPECIFIER-TYPE-CACHE
 151  16755212  13072420 ( 78.0%)  3681768 ( 22.0%) 1024  100.0% CSUBTYPEP-CACHE
 152   9913114   8374965 ( 84.5%)  1537893 ( 15.5%)  256  100.0% MAKE-VALUES-TYPE-CACHED-CACHE
 153   7718160   4702069 ( 60.9%)  3675019 ( 47.6%)  512  100.0% TYPE-INTERSECTION2-CACHE
 154   5184706   1626512 ( 31.4%)  3557973 ( 68.6%)  256   86.3% %TYPE-INTERSECTION-CACHE
 155   5156044   3986450 ( 77.3%)  1169338 ( 22.7%)  256  100.0% VALUES-SUBTYPEP-CACHE
 156   4550163   2969409 ( 65.3%)  1580498 ( 34.7%)  256  100.0% VALUES-TYPE-INTERSECTION-CACHE
 157   3544211   2607658 ( 73.6%)   936300 ( 26.4%)  256   98.8% %TYPE-UNION-CACHE
 158   2545070   2110741 ( 82.9%)   433817 ( 17.0%)  512  100.0% PRIMITIVE-TYPE-AUX-CACHE
 159   2164841   1112785 ( 51.4%)  1706097 ( 78.8%)  256  100.0% TYPE-UNION2-CACHE
 160   1568022   1467575 ( 93.6%)   100191 (  6.4%)  256  100.0% TYPE-SINGLETON-P-CACHE
 161    779941    703208 ( 90.2%)    76477 (  9.8%)  256  100.0% %COERCE-TO-VALUES-CACHE
 162    618605    448427 ( 72.5%)   169922 ( 27.5%)  256  100.0% VALUES-TYPE-UNION-CACHE
 163    145805     29403 ( 20.2%)   116206 ( 79.7%)  256   76.6% %%MAKE-UNION-TYPE-CACHED-CACHE
 164    118634     76203 ( 64.2%)    42188 ( 35.6%)  256   94.9% %%MAKE-ARRAY-TYPE-CACHED-CACHE
 165     12319     12167 ( 98.8%)       47 (  0.4%)  128   82.0% WEAKEN-TYPE-CACHE
 166     10416      9492 ( 91.1%)      668 (  6.4%)  256  100.0% TYPE-NEGATION-CACHE
 167 |#
 168
 169 ;;; miscellaneous tidying up and saving results
 170 (let ((filename "output/object-filenames-for-genesis.lisp-expr"))
 171   (ensure-directories-exist filename :verbose t)
 172   ;; save the initial-symbol-values before writing the object filenames.
 173   (save-initial-symbol-values)
 174   (with-open-file (s filename :direction :output :if-exists :supersede)
 175     (write *target-object-file-names* :stream s :readably t)))
 176
 177 ;;; Let's check that the type system was reasonably sane. (It's easy
 178 ;;; to spend a long time wandering around confused trying to debug
 179 ;;; cold init if it wasn't.)
 180 (when (position :sb-test *shebang-features*)
 181   (load "tests/type.after-xc.lisp"))
 182
 183 ;;; If you're experimenting with the system under a cross-compilation
 184 ;;; host which supports CMU-CL-style SAVE-LISP, this can be a good
 185 ;;; time to run it. The resulting core isn't used in the normal build,
 186 ;;; but can be handy for experimenting with the system. (See slam.sh
 187 ;;; for an example.)
 188 (when (position :sb-after-xc-core *shebang-features*)
 189   #+cmu (ext:save-lisp "output/after-xc.core" :load-init-file nil)
 190   #+sbcl (sb-ext:save-lisp-and-die "output/after-xc.core")
 191   #+openmcl (ccl::save-application "output/after-xc.core")
 192   #+clisp (ext:saveinitmem "output/after-xc.core"))
 193 #+cmu (ext:quit)
 194 #+clisp (ext:quit)
 195 #+abcl (ext:quit)