Add *message-id-disable*

[s-mailx.git] / conf.rc

#@ conf.rc can be used adjust the set of desired features, paths, etc.
#@ You should have read `INSTALL' first.
#@ Notes:
#@ . This file is parsed by the shell: it is in sh(1), not in make(1) syntax.
#@ . Choosing one of the predefined CONFIG= sets overwrites a lot of items
#@   that can be set in here
#@ . Specifying settings on the command line will take precedence over the
#@   variables in here (correctly triggering build updates as necessary)
#@ . Using one of the predefined CONFIG= sets overrides anything else
#@ . You may NOT comment out anything in here -- if you want to disable a
#@   feature, simply set it to `0'.  (It won't work properly otherwise!)

## FEATURE SET ##
#
# The variables in here can be used to adjust the feature set of S-nail.
# Only if a variable is set to `1' it is treated as being `set'.
# Only a `set' variable will cause the possibly necessary feature tests to be
# performed, so as to detect wether the wanted feature really can be used

# Major switch to toggle *all* network related protocols (IMAP,POP3,SMTP) and
# related/dependent stuff (GSSAPI,SSL)
WANT_SOCKETS=1

# If WANT_SOCKETS, should the IPv6 family of functions be searched for and
# compiled into the program if found?
# TODO NOTE:
# TODO S-nail does not yet support IPv6 address notation, as in, e.g.,
# TODO imaps://user1@::1 (or @[::1]), but it will happily establish a
# TODO connection to imaps://user1@host1 if host1 listens via IPv6
WANT_IPV6=1

# Support for SecureSocketLayer (TransportLayerSecurity, TLS), i.e.,
# encrypted socket connections.
# This needs OpenSSL libraries (<http://www.openssl.org>), though these should
# be installed by default on practically all operating systems today
WANT_SSL=1

# Support for IMAP protocol?  (Reading of mails directly on the server)
WANT_IMAP=1
# Support for GSSAPI-based authentication, i.e., Kerberos V5 for IMAP?
# (This is disabled by default because it brings in a bunch of dependencies,
# and most people don't need it.)
WANT_GSSAPI=0

# Support for POP3 protocol?  (Download of mails via POP over the network)
WANT_POP3=1

# Support for SMTP protocol?  (Directly sending mails over the network)
WANT_SMTP=1

# Several facilities use the MD5 message digest, but for some of them it is
# used for optional features (POP3: APOP authentification, IMAP: CRAM-MD5
# authentification, SMTP: CRAM-MD5 authentification).
# If you don't need those, you may exclude MD5 from S-nail.
# Note that WANT_MD5 is automatically turned off if its exclusion will only
# affect MIME boundary strings and Message-Id: fields
WANT_MD5=1

# Character set conversion enables reading and sending of mails in multiple
# character sets through usage of the iconv(3) library.
# Please read the manual section "Character sets" for the complete picture.
# This should usually be enabled
WANT_ICONV=1

# IDNA (internationalized domain names for applications) offers users the
# possibility to use domain names in their native language, i.e., to use
# non-US-ASCII content, as in, e.g., <www.räksmörgåsa.example>, which the IDNA
# algorithm would convert to <www.xn--rksmrgsa-0zap8p.example>.  :)
# This needs the GNU Libidn library (<https://www.gnu.org/software/libidn/>)
WANT_IDNA=1

# Command line editing and -history.
# S-nail actually supports three different line editors:
# . WANT_LINE_EDITOR=1, WANT_EDITLINE=0, WANT_EDITLINE_READLINE=0
#   If ISO C (ISO/IEC 9899:1990/Amendment 1:1995) is supported on the system
#   then our builtin NCL (Nail Command Line editor) version will be used.
#   This one is documented in the manual section "Line editor" (`./nail.1').
# The fully fledged external libraries may offer a slightly better user
# experience at the cost of needing more memory and CPU time; also note that
# the behaviour of S-nail in respect to signal handling may no longer be POSIX
# compliant.
# . WANT_LINE_EDITOR=1, WANT_EDITLINE=1, WANT_EDITLINE_READLINE=0
#   Command line editing via BSD editline(3)
# . WANT_LINE_EDITOR=1, WANT_EDITLINE=1, WANT_EDITLINE_READLINE=1
#   The GNU readline(3) compatible interface
WANT_LINE_EDITOR=1
WANT_EDITLINE=0
WANT_EDITLINE_READLINE=0

# Interaction with a spam email filter is possible.
# Refer to all commands with a `spam' prefix, and see the manual section
# "Handling spam" (`./nail.1')
WANT_SPAM=1

# If given an optional argument the `help' command will print a help string
# only for the mentioned command; those strings take up space and so one may
# disable this feature.
WANT_DOCSTRINGS=1

# A simple line-based quoting mechanism can be made available via the
# *quote-fold* mechanism.
# This will be turned off automatically if the required character
# classification is not available on the host.
# NOTE: this is EXPERIMENTAL and INCOMPLETE!
WANT_QUOTE_FOLD=0

## PATHS AND PROGRAMS ##

# General prefix where S-nail should be installed
PREFIX=/usr/local

# Fine tune individual locations, normally under $PREFIX
# . the place of the S-nail program
BINDIR="${PREFIX}/bin"
# . of the manual
MANDIR="${PREFIX}/man"
# . of the exemplary resource file
SYSCONFDIR="${PREFIX}/etc"

# This variable is prepended to all the paths from above at installation time;
# this feature can be used for, e.g., package building: if $PREFIX is
# `/usr/local', but $DESTDIR is set to, say, `here', then S-nail will still
# think its $PREFIX is `/usr/local' whereis the build system will instead use
# `here/usr/local'
DESTDIR=

# The directory where the local mail system stores user mail (mbox) files.
# (Only of interest if the local mail system is used)
MAILSPOOL=/var/mail

# Path to the local MTA (Mail Transport Agent).
# (Only of interest if the local mail system is used)
SENDMAIL=/usr/sbin/sendmail

# Today a lot of systems no longer use sendmail(1), but a different MTA.
# To ensure compatibility with sendmail(1), a system called mailwrapper(8) is
# used, which selects the required service by looking at the name by which the
# program actually has been invoked.
# This variable can be used to adjust this name as necessary
# (Only of interest if the local mail system is used)
SENDMAIL_PROGNAME=sendmail

# Fallback sh(1) path.
# Note that it is not guaranteed that *all* uses of the shell use this, but it
# may actually happen that execlp(2) will need to fallback to its own one.
# (Note: this is named XSHELL so that it doesn't clash with the POSIX
# standard $SHELL, which would effectively cause this setting to be ignored)
XSHELL=/bin/sh

# The default *LISTER* (in the $PATH).
# (Note: this is named XLISTER so that it doesn't clash with the POSIX
# standard $LISTER, which would effectively cause this setting to be ignored)
XLISTER=ls

# The default *PAGER* (in the $PATH).
# (Note: this is named XPAGER so that it doesn't clash with the POSIX standard
# $PAGER, which would effectively cause this setting to be ignored)
XPAGER=more

# Build+Install: the cmp(1) command (in the $PATH)
CMP=cmp

# Build+Install: the strip(1) program (in the $PATH)
STRIP=strip

# Build+Install: the nonstandard install(1) program (in the $PATH)
INSTALL=install

##  --  >8  --  8<  --  ##

## Normal users should not need to read any further

## PATHS AND PROGRAMS, DEVELOPMENT ##

# For those who want to install S-nail(1) as nail(1), use an empty *SID*
SID=s-

# To ease the life of forkers and packagers one may even adjust the "nail"
# of nail(1).  Note that $SID$NAIL must be longer than two characters
NAIL=nail

# The location of the exemplary resource template.
# Note it's not overwritten if it yet exists!
SYSCONFRC="${SYSCONFDIR}/${SID}${NAIL}.rc"

## FEATURE SET, DEVELOPMENT ##

# We ship with our own small and efficient getopt(3) implementation;
# set this to always choose that one without even checking for another one
WANT_NOGETOPT=0

# A lot of use of alloca(3) -- use a slow and expensive heap approach instead?
WANT_NOALLOCA=0

# Enable debug-only code assertions
WANT_ASSERTS=0

# vim:set fenc=utf-8 syntax=conf:s-it-mode