Move string dope from strings.c to the new memory.c..

[s-mailx.git] / INSTALL

I n s t a l l i n g  S - n a i l
================================

1.  Compilation
1.1 What if configuration fails?
1.2 What if building fails?
1.3 How can i enable debugging?
2.  Special notes for the latest release
3.  Current codebase state

1. Compilation
--------------

System specific notes can be found in the next section.
All (optional) features are documented (and adjustable) in "make.rc".
Adjustments may also take place, and are usually done, from the command
line, overriding those made in "make.rc" (if any).
Without any adjustments all possible features which are not in
experimental state will be enabled but not "require"d, so that
configuration won't fail shall any of them not be usable due to the
given system environment.

  $ make install
  $ make uninstall          # Won't remove the system wide startup file!
  $ make distclean          # *Completely* cleanup working directory

With adjustments:

  $ make WANT_POP3=no WANT_SMTP=require install
  $ make WANT_READLINE=true PREFIX=/some/nasty/prefix install

With utility program and feature adjustments:

  $ make awk=/usr/bin/nawk WANT_SOCKETS=no DESTDIR=./zzz install

If WANT_DOTLOCK has been enabled to include the minimal privilege-
separated dotlock creation program that will be installed SETUID to the
defined PRIVSEP_USER (default is "root"), and therefore the installation
process needs to have the appropriate privileges.
You therefore possibly want to separate the configuration / building and
the installation tasks, and give the last step higher privileges via
super(1), sudo(1), su(1) or a similar mechanism, e.g.:

  $ make PREFIX=/usr config build && super make doinstall

There are also some predefined restricted configuration sets available,
which take precedence over anything else (names are case-insensitive):

. CONFIG=NULL, CONFIG=NULLI
  Anything that can be turned off is off.  MIME can't.
  The latter adds and "require"s iconv(3), though.

. CONFIG=MINIMAL
  This is the most plain mailx(1)-alike mode, but with MIME support and
  (if available) character set conversion and regular expressions
  builtin (here mostly ment for mailing list matching).  Dotlock files
  and the privileged separated dotlock helper.  That's it.

  "Require"s dotlocking and the privileged separated dotlock helper.

. CONFIG=MEDIUM
  Like MINIMAL, but with documentation strings, the builtin line editor
  (MLE) with history support (if possible), error tracking, basic colour
  support and IDNA addresses.  Also adds in generic spam filter support.

  Possibly what people want who need nothing but a MIME-capable mailx(1)
  and don't regret improved usability for the rare interactive use
  occasions.

  "Require"s iconv(3), dotlocking and the privileged separated dotlock
  helper.

. CONFIG=NETSEND
  NETSEND also tries to add SSL/TLS, GSSAPI, .netrc file parsing as well
  as external password *agent-lookup* on top of MEDIUM, on the other
  hand spam filter support is removed.

  Sending messages directly to the mail provider via the SMTP protocol,
  instead of requiring a local mail-transfer-agent (MTA) who does.

  "Require"s iconv(3), SSL/TLS, SMTP (sockets), dotlocking and the
  privileged separated dotlock helper.

. CONFIG=MAXIMAL
  Anything on, including experimental features.
  "Require"s iconv(3), regex(3), the MLE as well as dotlocking and the
  privileged separated dotlock helper.

  S-nail(1) gains mail fetching capabilities and heads more toward being
  a full-featured mail-user-agent (MUA) with this.

E.g.:

  $ make CONFIG=MAXIMAL DESTDIR=./xtest install

would create a "s-nail" binary and install a "s-nail" manual etc.
under the prefix "/usr/local" but rooted under "[./]xtest", i.e., the
binary would be installed as "[./]xtest/usr/local/bin/s-nail".
The following make(1) target exists:

. all         Create / check and update configuration, build.
. install     Create / check and update configuration, build, install.
. clean       Remove anything which can be rebuild.
. distclean   Remove anything which can be rebuild or reconfigured.
. uninstall   Uninstall (if configured).

. config      Only create or check and update the configuration.
. build       Only build (using the existing configuration).
. test        Run "cc-test.sh" in --check-only mode on the built binary.
. doinstall or packager-install
              Only install using the built files of the existing
              configuration.  It is possible to overwrite DESTDIR= when
              using this target nonetheless (a following `uninstall'
              won't know about that overwritten value, however).

Setting the make(1) variable $VERBOSE to an arbitrary value, as in
"$ make VERBOSE=xy install", will change the output of the `build',
`install' etc. targets to a different, more verbose one.
If some libraries are missing that you know are installed on your
system, or if other errors occur due to missing files but which you know
exist, please ensure that the environment variable $C_INCLUDE_PATH
includes the necessary "include/" paths and the environment variable
$LD_LIBRARY_PATH includes the necessary "lib/"rary paths.

The S-nail make system will inspect these two environment variables and
*automatically* convert them to cc(1) (c99(1)) -I and -L options (since
these environment variables are, different to the command line options,
not part of the POSIX standard).
To set these environment variables, the following can be done in
a Bourne / Korn / POSIX compatible shell:

  $ C_INCLUDE_PATH="${C_INCLUDE_PATH}:/usr/local/include"
  $ LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:/usr/local/lib"
  $ export C_INCLUDE_PATH LD_LIBRARY_PATH
  $ make install

The S-nail make system will also automatically integrate pkgsrc(7) paths
into this mechanism.  pkgsrc(7) is used to handle building (compilation),
installation and removal of software packages on a lot of operating
systems, including all BSD systems, Linux, Solaris etc.
And if all else fails you can also forcefully pass in include directives
and library paths by passing prefilled $INCS and $LIBS variables:

  $ make INCS=-I/mypath/lib LIBS=-l/mypath/iconv install

1.1 What if configuration fails?
--------------------------------

The configuration process creates some files named "config":

. config.log  output generated by the configuration compile tests.
. config.lst  configuration (chosen option, programs, paths).
. config.h    C program header produced according to "config.lst".

Of special interest is "config.log" since the error usually manifests
here in textual output.  Maybe that makes it obvious what can be done
(header files could not be found because of missing entries in
$C_INCLUDE_PATH, libraries could not be linked because of incomplete
$LD_LIBRARY_PATH).
Otherwise it is getting complicated, and it would be appreciated if you
would contact s-nail-users@!

1.2 What if building fails?
---------------------------

Even worse!  This should not happen if configuration succeeded!  It
would be very kind and highly appreciated if you would report this
to s-nail-users@.

1.3 How can i enable debugging?
-------------------------------

Please ensure WANT_DEBUG=yes is enabled during compilation, as in

  $ make CONFIG=MAXIMAL WANT_DEBUG=yes

If $WANT_AUTOCC is enabled then the build system should automatically
adjust the compiler flags accordingly, please see "make.rc" for more.
There is also a `devel'opment target which does most of this by itself:

  $ make devel

$WANT_DEBUG (`devel') will enable memory bound debug canaries and
Not-Yet-Dead function graph listings etc.  Whereas the latter will try
to write its listing into a file named after your favourite MUA in
your $TMPDIR (or "/tmp" or "./", in order), falling back to STDERR shall
creation of the file not be possible (we won't overwrite an existing
file), the debug facilities in general make their appearance on the
standard error channel; because this can be a quite long output, then,
it is possibly a good idea to redirect it to a file:

  $ s-nail -dvv 2> error.log

Should you really discover any problems with S-nail it would be very
useful for development if you would contact s-nail-users@!
Thank you!

2. Special notes for the latest release
---------------------------------------

S-nail(1) has been or is used regulary on these systems ("uname -srm").
Unless otherwise noted the following applies to saying "$ make" and
"$ make devel" followed by "$ make test".

. All systems:
  - I've turned off -Wstrict-overflow warnings unless WANT_DEVEL is
    defined (talking about WANT_AUTOCC=yes here).  With gcc 5.1 the
    number of warnings exploded.  With gcc 5.2 that went down again,
    but just keep it like that nonetheless.
  - You may see warnings on unused returns from write(2), ftruncate(2)
    and a few other I/O functions.  These will vanish after the large
    I/O and MIME rewrite that comes next.  They mostly refer to debug
    dumping, truncating a(n open) file to zero size and freopen(3)ing
    one of the standard channels.  I refrained from adding abort(3)
    calls as return value checks.

. All 32-bit systems:
  - There _may_ be warnings about format strings, like, e.g.,
      auxlily.c:1610:10: warning: format '%lu' expects type 'long
      unsigned int', but argument 3 has type 'size_t'
    The S-nail codebase is ISO C89, so we have no %z printf(3) format.
    However, "nail.h" tries hard to detect the real type size and
    defines the "PRI[du]Z" macros which end up with the correct size,
    which is also compile-time asserted (see the "MCTA(sizeof(size_t) ==
    XZ)" statements in "nail.h".

    You can completely overcome this situation by forcing ISO C99 mode
    when compiling, e.g., with gcc(1) and clang(1): if you use
    $WANT_AUTOCC then also pass "ADDCFLAGS=-std=c99", otherwise ensure
    -std=c99 is set in your $CFLAGS.

. ArchLinux <https://www.archlinux.org/>
  Latest as of 2016-03-26, clang(1) and gcc(1).

. Void Linux <http://www.voidlinux.eu/>
  Not tested for v14.8.8.
  (My current working environment is restricted since i've lost
  a machine in January.)

. CRUX Linux <http://www.crux.nu/>
  CRUX 3.2 RC3, gcc(1).

. FreeBSD <https://www.freebsd.org/>
  FreeBSD 10.2, clang(1) and gcc6(1).
  Not tested for v14.8.8.
  (My current working environment is restricted since i've lost
  a machine in January.)

. OpenBSD <http://www.openbsd.org/>
  Not tested for v14.8.8.
  (My current working environment is restricted since i've lost
  a machine in January.)

. DragonFly BSD <https://www.dragonflybsd.org/>
  Not tested for v14.8.8.
  (My current working environment is restricted since i've lost
  a machine in January.)

. NetBSD <https://www.netbsd.org/>
  + Show work.

. Solaris <http://opencsw.org/>
  * First of all: thanks to OpenCSW.org for offering SSH access to
    their Solaris build cluster!
  - According to standards(5) we require the /usr/xpg4 environment, and
    will bail if we cannot find it.
  - With $WANT_AUTOCC: we try to use Sun cc(1) whenever we find it.
    If your gcc(1) installation is doing alright you have to turn
    $WANT_AUTOCC off and use $CC, $CFLAGS and $LDFLAGS.
  - I will never get iconv(3) right for Solaris it seems.
  - In order to be able to run the tests you will need a cksum(1) that
    supports CRC-32 (POSIX).  We look into "/opt/csw/gnu/cksum", but if
    that cannot be found you have to adjust the $cksum variable (see
    above) to something that works.  (A future version of S-nail will
    use different testing, but until then: Sorry!)
  - I couldn't get us going on SunOS 5.9 Sparc: the build system had to
    be extended to check for UINTPTR_MAX being defined as the empty
    string and similar very special things.
  - The OpenCSW build cluster consists of SunOS 5.9 - 5.11 machines
    under SPARC and i386, and it looked good on 2016-03-25.
    However, some notes:
    + We may forcefully disable stack protectors on SunOS/gcc because of
      linking errors seen on earlier tests:
        Undefined                       first referenced
         symbol                             in file
        __stack_chk_fail                    accmacvar.o
        __stack_chk_guard                   accmacvar.o
        ld: fatal: symbol referencing errors
    + If you get the compiler / system header installation error
        Undefined                       first referenced
         symbol                             in file
        __builtin_stdarg_start              auxlily.o
      then you have to overwrite this symbol with __builtin_va_start,
      e.g., in conjunction with $WANT_AUTOCC add this:
       ADDCFLAGS='-D__builtin_stdarg_start=__builtin_va_start'

. UnixWare 7.1.4.
  + Note: it is no longer possible to use the `install' rule, because
    we use shell functions to ease the task of directory creation etc.
    (especially useful due to $VERBOSE), and that won't work due to bugs
    (in the system make(1) program i presume).
  + Not tested for v14.8.[567], but never seen any problems but some
    harmless and ignorable compile warnings.

3. Current codebase state
-------------------------

I claim that we have reached a stable state that should enable users
a neatless mode of operation when running 24/7 (except for growing
memory usage from the OpenSSL side of the road, when used).
I'll hope to be able to release S-nail v20 on 2020-03-25, the 42th
anniversary of Berkeley Mail, as a good one.  Also see "TODO".

For S-nail, v15.0 (not before 2017) is dedicated to a Send- and
MIME-layer rewrite that will bring the possibility to access each
message part individually. Because the Berkeley codebase and its nail
fork have design flaws in respect to mailbox handling and non-local code
jumps (due to / and signals), whereas the (MIME capable) NetBSD and
OpenBSD forks have instead addressed this problem, more or less
complete, in one or the other way, v15.0 will also have to address
signal handling, because only like that we have the possibility to ever
reach a clean state from which we can actually think about re-extending
this MUA.

# s-ts-mode