configure: add logging
[qemu/wangdongxu.git] / hw / arm_gic.c
blob8286a282ea08cb67ca6f146d3862760c187ed0f4
1 /*
2 * ARM Generic/Distributed Interrupt Controller
4 * Copyright (c) 2006-2007 CodeSourcery.
5 * Written by Paul Brook
7 * This code is licenced under the GPL.
8 */
10 /* This file contains implementation code for the RealView EB interrupt
11 controller, MPCore distributed interrupt controller and ARMv7-M
12 Nested Vectored Interrupt Controller. */
14 //#define DEBUG_GIC
16 #ifdef DEBUG_GIC
17 #define DPRINTF(fmt, ...) \
18 do { printf("arm_gic: " fmt , ## __VA_ARGS__); } while (0)
19 #else
20 #define DPRINTF(fmt, ...) do {} while(0)
21 #endif
23 #ifdef NVIC
24 static const uint8_t gic_id[] =
25 { 0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1 };
26 /* The NVIC has 16 internal vectors. However these are not exposed
27 through the normal GIC interface. */
28 #define GIC_BASE_IRQ 32
29 #else
30 static const uint8_t gic_id[] =
31 { 0x90, 0x13, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
32 #define GIC_BASE_IRQ 0
33 #endif
35 #define FROM_SYSBUSGIC(type, dev) \
36 DO_UPCAST(type, gic, FROM_SYSBUS(gic_state, dev))
38 typedef struct gic_irq_state
40 /* ??? The documentation seems to imply the enable bits are global, even
41 for per-cpu interrupts. This seems strange. */
42 unsigned enabled:1;
43 unsigned pending:NCPU;
44 unsigned active:NCPU;
45 unsigned level:NCPU;
46 unsigned model:1; /* 0 = N:N, 1 = 1:N */
47 unsigned trigger:1; /* nonzero = edge triggered. */
48 } gic_irq_state;
50 #define ALL_CPU_MASK ((1 << NCPU) - 1)
51 #if NCPU > 1
52 #define NUM_CPU(s) ((s)->num_cpu)
53 #else
54 #define NUM_CPU(s) 1
55 #endif
57 #define GIC_SET_ENABLED(irq) s->irq_state[irq].enabled = 1
58 #define GIC_CLEAR_ENABLED(irq) s->irq_state[irq].enabled = 0
59 #define GIC_TEST_ENABLED(irq) s->irq_state[irq].enabled
60 #define GIC_SET_PENDING(irq, cm) s->irq_state[irq].pending |= (cm)
61 #define GIC_CLEAR_PENDING(irq, cm) s->irq_state[irq].pending &= ~(cm)
62 #define GIC_TEST_PENDING(irq, cm) ((s->irq_state[irq].pending & (cm)) != 0)
63 #define GIC_SET_ACTIVE(irq, cm) s->irq_state[irq].active |= (cm)
64 #define GIC_CLEAR_ACTIVE(irq, cm) s->irq_state[irq].active &= ~(cm)
65 #define GIC_TEST_ACTIVE(irq, cm) ((s->irq_state[irq].active & (cm)) != 0)
66 #define GIC_SET_MODEL(irq) s->irq_state[irq].model = 1
67 #define GIC_CLEAR_MODEL(irq) s->irq_state[irq].model = 0
68 #define GIC_TEST_MODEL(irq) s->irq_state[irq].model
69 #define GIC_SET_LEVEL(irq, cm) s->irq_state[irq].level = (cm)
70 #define GIC_CLEAR_LEVEL(irq, cm) s->irq_state[irq].level &= ~(cm)
71 #define GIC_TEST_LEVEL(irq, cm) ((s->irq_state[irq].level & (cm)) != 0)
72 #define GIC_SET_TRIGGER(irq) s->irq_state[irq].trigger = 1
73 #define GIC_CLEAR_TRIGGER(irq) s->irq_state[irq].trigger = 0
74 #define GIC_TEST_TRIGGER(irq) s->irq_state[irq].trigger
75 #define GIC_GET_PRIORITY(irq, cpu) \
76 (((irq) < 32) ? s->priority1[irq][cpu] : s->priority2[(irq) - 32])
77 #ifdef NVIC
78 #define GIC_TARGET(irq) 1
79 #else
80 #define GIC_TARGET(irq) s->irq_target[irq]
81 #endif
83 typedef struct gic_state
85 SysBusDevice busdev;
86 qemu_irq parent_irq[NCPU];
87 int enabled;
88 int cpu_enabled[NCPU];
90 gic_irq_state irq_state[GIC_NIRQ];
91 #ifndef NVIC
92 int irq_target[GIC_NIRQ];
93 #endif
94 int priority1[32][NCPU];
95 int priority2[GIC_NIRQ - 32];
96 int last_active[GIC_NIRQ][NCPU];
98 int priority_mask[NCPU];
99 int running_irq[NCPU];
100 int running_priority[NCPU];
101 int current_pending[NCPU];
103 #if NCPU > 1
104 int num_cpu;
105 #endif
107 int iomemtype;
108 } gic_state;
110 /* TODO: Many places that call this routine could be optimized. */
111 /* Update interrupt status after enabled or pending bits have been changed. */
112 static void gic_update(gic_state *s)
114 int best_irq;
115 int best_prio;
116 int irq;
117 int level;
118 int cpu;
119 int cm;
121 for (cpu = 0; cpu < NUM_CPU(s); cpu++) {
122 cm = 1 << cpu;
123 s->current_pending[cpu] = 1023;
124 if (!s->enabled || !s->cpu_enabled[cpu]) {
125 qemu_irq_lower(s->parent_irq[cpu]);
126 return;
128 best_prio = 0x100;
129 best_irq = 1023;
130 for (irq = 0; irq < GIC_NIRQ; irq++) {
131 if (GIC_TEST_ENABLED(irq) && GIC_TEST_PENDING(irq, cm)) {
132 if (GIC_GET_PRIORITY(irq, cpu) < best_prio) {
133 best_prio = GIC_GET_PRIORITY(irq, cpu);
134 best_irq = irq;
138 level = 0;
139 if (best_prio <= s->priority_mask[cpu]) {
140 s->current_pending[cpu] = best_irq;
141 if (best_prio < s->running_priority[cpu]) {
142 DPRINTF("Raised pending IRQ %d\n", best_irq);
143 level = 1;
146 qemu_set_irq(s->parent_irq[cpu], level);
150 static void __attribute__((unused))
151 gic_set_pending_private(gic_state *s, int cpu, int irq)
153 int cm = 1 << cpu;
155 if (GIC_TEST_PENDING(irq, cm))
156 return;
158 DPRINTF("Set %d pending cpu %d\n", irq, cpu);
159 GIC_SET_PENDING(irq, cm);
160 gic_update(s);
163 /* Process a change in an external IRQ input. */
164 static void gic_set_irq(void *opaque, int irq, int level)
166 gic_state *s = (gic_state *)opaque;
167 /* The first external input line is internal interrupt 32. */
168 irq += 32;
169 if (level == GIC_TEST_LEVEL(irq, ALL_CPU_MASK))
170 return;
172 if (level) {
173 GIC_SET_LEVEL(irq, ALL_CPU_MASK);
174 if (GIC_TEST_TRIGGER(irq) || GIC_TEST_ENABLED(irq)) {
175 DPRINTF("Set %d pending mask %x\n", irq, GIC_TARGET(irq));
176 GIC_SET_PENDING(irq, GIC_TARGET(irq));
178 } else {
179 GIC_CLEAR_LEVEL(irq, ALL_CPU_MASK);
181 gic_update(s);
184 static void gic_set_running_irq(gic_state *s, int cpu, int irq)
186 s->running_irq[cpu] = irq;
187 if (irq == 1023) {
188 s->running_priority[cpu] = 0x100;
189 } else {
190 s->running_priority[cpu] = GIC_GET_PRIORITY(irq, cpu);
192 gic_update(s);
195 static uint32_t gic_acknowledge_irq(gic_state *s, int cpu)
197 int new_irq;
198 int cm = 1 << cpu;
199 new_irq = s->current_pending[cpu];
200 if (new_irq == 1023
201 || GIC_GET_PRIORITY(new_irq, cpu) >= s->running_priority[cpu]) {
202 DPRINTF("ACK no pending IRQ\n");
203 return 1023;
205 s->last_active[new_irq][cpu] = s->running_irq[cpu];
206 /* Clear pending flags for both level and edge triggered interrupts.
207 Level triggered IRQs will be reasserted once they become inactive. */
208 GIC_CLEAR_PENDING(new_irq, GIC_TEST_MODEL(new_irq) ? ALL_CPU_MASK : cm);
209 gic_set_running_irq(s, cpu, new_irq);
210 DPRINTF("ACK %d\n", new_irq);
211 return new_irq;
214 static void gic_complete_irq(gic_state * s, int cpu, int irq)
216 int update = 0;
217 int cm = 1 << cpu;
218 DPRINTF("EOI %d\n", irq);
219 if (s->running_irq[cpu] == 1023)
220 return; /* No active IRQ. */
221 if (irq != 1023) {
222 /* Mark level triggered interrupts as pending if they are still
223 raised. */
224 if (!GIC_TEST_TRIGGER(irq) && GIC_TEST_ENABLED(irq)
225 && GIC_TEST_LEVEL(irq, cm) && (GIC_TARGET(irq) & cm) != 0) {
226 DPRINTF("Set %d pending mask %x\n", irq, cm);
227 GIC_SET_PENDING(irq, cm);
228 update = 1;
231 if (irq != s->running_irq[cpu]) {
232 /* Complete an IRQ that is not currently running. */
233 int tmp = s->running_irq[cpu];
234 while (s->last_active[tmp][cpu] != 1023) {
235 if (s->last_active[tmp][cpu] == irq) {
236 s->last_active[tmp][cpu] = s->last_active[irq][cpu];
237 break;
239 tmp = s->last_active[tmp][cpu];
241 if (update) {
242 gic_update(s);
244 } else {
245 /* Complete the current running IRQ. */
246 gic_set_running_irq(s, cpu, s->last_active[s->running_irq[cpu]][cpu]);
250 static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
252 gic_state *s = (gic_state *)opaque;
253 uint32_t res;
254 int irq;
255 int i;
256 int cpu;
257 int cm;
258 int mask;
260 cpu = gic_get_current_cpu();
261 cm = 1 << cpu;
262 if (offset < 0x100) {
263 #ifndef NVIC
264 if (offset == 0)
265 return s->enabled;
266 if (offset == 4)
267 return ((GIC_NIRQ / 32) - 1) | ((NUM_CPU(s) - 1) << 5);
268 if (offset < 0x08)
269 return 0;
270 #endif
271 goto bad_reg;
272 } else if (offset < 0x200) {
273 /* Interrupt Set/Clear Enable. */
274 if (offset < 0x180)
275 irq = (offset - 0x100) * 8;
276 else
277 irq = (offset - 0x180) * 8;
278 irq += GIC_BASE_IRQ;
279 if (irq >= GIC_NIRQ)
280 goto bad_reg;
281 res = 0;
282 for (i = 0; i < 8; i++) {
283 if (GIC_TEST_ENABLED(irq + i)) {
284 res |= (1 << i);
287 } else if (offset < 0x300) {
288 /* Interrupt Set/Clear Pending. */
289 if (offset < 0x280)
290 irq = (offset - 0x200) * 8;
291 else
292 irq = (offset - 0x280) * 8;
293 irq += GIC_BASE_IRQ;
294 if (irq >= GIC_NIRQ)
295 goto bad_reg;
296 res = 0;
297 mask = (irq < 32) ? cm : ALL_CPU_MASK;
298 for (i = 0; i < 8; i++) {
299 if (GIC_TEST_PENDING(irq + i, mask)) {
300 res |= (1 << i);
303 } else if (offset < 0x400) {
304 /* Interrupt Active. */
305 irq = (offset - 0x300) * 8 + GIC_BASE_IRQ;
306 if (irq >= GIC_NIRQ)
307 goto bad_reg;
308 res = 0;
309 mask = (irq < 32) ? cm : ALL_CPU_MASK;
310 for (i = 0; i < 8; i++) {
311 if (GIC_TEST_ACTIVE(irq + i, mask)) {
312 res |= (1 << i);
315 } else if (offset < 0x800) {
316 /* Interrupt Priority. */
317 irq = (offset - 0x400) + GIC_BASE_IRQ;
318 if (irq >= GIC_NIRQ)
319 goto bad_reg;
320 res = GIC_GET_PRIORITY(irq, cpu);
321 #ifndef NVIC
322 } else if (offset < 0xc00) {
323 /* Interrupt CPU Target. */
324 irq = (offset - 0x800) + GIC_BASE_IRQ;
325 if (irq >= GIC_NIRQ)
326 goto bad_reg;
327 if (irq >= 29 && irq <= 31) {
328 res = cm;
329 } else {
330 res = GIC_TARGET(irq);
332 } else if (offset < 0xf00) {
333 /* Interrupt Configuration. */
334 irq = (offset - 0xc00) * 2 + GIC_BASE_IRQ;
335 if (irq >= GIC_NIRQ)
336 goto bad_reg;
337 res = 0;
338 for (i = 0; i < 4; i++) {
339 if (GIC_TEST_MODEL(irq + i))
340 res |= (1 << (i * 2));
341 if (GIC_TEST_TRIGGER(irq + i))
342 res |= (2 << (i * 2));
344 #endif
345 } else if (offset < 0xfe0) {
346 goto bad_reg;
347 } else /* offset >= 0xfe0 */ {
348 if (offset & 3) {
349 res = 0;
350 } else {
351 res = gic_id[(offset - 0xfe0) >> 2];
354 return res;
355 bad_reg:
356 hw_error("gic_dist_readb: Bad offset %x\n", (int)offset);
357 return 0;
360 static uint32_t gic_dist_readw(void *opaque, target_phys_addr_t offset)
362 uint32_t val;
363 val = gic_dist_readb(opaque, offset);
364 val |= gic_dist_readb(opaque, offset + 1) << 8;
365 return val;
368 static uint32_t gic_dist_readl(void *opaque, target_phys_addr_t offset)
370 uint32_t val;
371 #ifdef NVIC
372 gic_state *s = (gic_state *)opaque;
373 uint32_t addr;
374 addr = offset;
375 if (addr < 0x100 || addr > 0xd00)
376 return nvic_readl(s, addr);
377 #endif
378 val = gic_dist_readw(opaque, offset);
379 val |= gic_dist_readw(opaque, offset + 2) << 16;
380 return val;
383 static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
384 uint32_t value)
386 gic_state *s = (gic_state *)opaque;
387 int irq;
388 int i;
389 int cpu;
391 cpu = gic_get_current_cpu();
392 if (offset < 0x100) {
393 #ifdef NVIC
394 goto bad_reg;
395 #else
396 if (offset == 0) {
397 s->enabled = (value & 1);
398 DPRINTF("Distribution %sabled\n", s->enabled ? "En" : "Dis");
399 } else if (offset < 4) {
400 /* ignored. */
401 } else {
402 goto bad_reg;
404 #endif
405 } else if (offset < 0x180) {
406 /* Interrupt Set Enable. */
407 irq = (offset - 0x100) * 8 + GIC_BASE_IRQ;
408 if (irq >= GIC_NIRQ)
409 goto bad_reg;
410 if (irq < 16)
411 value = 0xff;
412 for (i = 0; i < 8; i++) {
413 if (value & (1 << i)) {
414 int mask = (irq < 32) ? (1 << cpu) : GIC_TARGET(irq);
415 if (!GIC_TEST_ENABLED(irq + i))
416 DPRINTF("Enabled IRQ %d\n", irq + i);
417 GIC_SET_ENABLED(irq + i);
418 /* If a raised level triggered IRQ enabled then mark
419 is as pending. */
420 if (GIC_TEST_LEVEL(irq + i, mask)
421 && !GIC_TEST_TRIGGER(irq + i)) {
422 DPRINTF("Set %d pending mask %x\n", irq + i, mask);
423 GIC_SET_PENDING(irq + i, mask);
427 } else if (offset < 0x200) {
428 /* Interrupt Clear Enable. */
429 irq = (offset - 0x180) * 8 + GIC_BASE_IRQ;
430 if (irq >= GIC_NIRQ)
431 goto bad_reg;
432 if (irq < 16)
433 value = 0;
434 for (i = 0; i < 8; i++) {
435 if (value & (1 << i)) {
436 if (GIC_TEST_ENABLED(irq + i))
437 DPRINTF("Disabled IRQ %d\n", irq + i);
438 GIC_CLEAR_ENABLED(irq + i);
441 } else if (offset < 0x280) {
442 /* Interrupt Set Pending. */
443 irq = (offset - 0x200) * 8 + GIC_BASE_IRQ;
444 if (irq >= GIC_NIRQ)
445 goto bad_reg;
446 if (irq < 16)
447 irq = 0;
449 for (i = 0; i < 8; i++) {
450 if (value & (1 << i)) {
451 GIC_SET_PENDING(irq + i, GIC_TARGET(irq));
454 } else if (offset < 0x300) {
455 /* Interrupt Clear Pending. */
456 irq = (offset - 0x280) * 8 + GIC_BASE_IRQ;
457 if (irq >= GIC_NIRQ)
458 goto bad_reg;
459 for (i = 0; i < 8; i++) {
460 /* ??? This currently clears the pending bit for all CPUs, even
461 for per-CPU interrupts. It's unclear whether this is the
462 corect behavior. */
463 if (value & (1 << i)) {
464 GIC_CLEAR_PENDING(irq + i, ALL_CPU_MASK);
467 } else if (offset < 0x400) {
468 /* Interrupt Active. */
469 goto bad_reg;
470 } else if (offset < 0x800) {
471 /* Interrupt Priority. */
472 irq = (offset - 0x400) + GIC_BASE_IRQ;
473 if (irq >= GIC_NIRQ)
474 goto bad_reg;
475 if (irq < 32) {
476 s->priority1[irq][cpu] = value;
477 } else {
478 s->priority2[irq - 32] = value;
480 #ifndef NVIC
481 } else if (offset < 0xc00) {
482 /* Interrupt CPU Target. */
483 irq = (offset - 0x800) + GIC_BASE_IRQ;
484 if (irq >= GIC_NIRQ)
485 goto bad_reg;
486 if (irq < 29)
487 value = 0;
488 else if (irq < 32)
489 value = ALL_CPU_MASK;
490 s->irq_target[irq] = value & ALL_CPU_MASK;
491 } else if (offset < 0xf00) {
492 /* Interrupt Configuration. */
493 irq = (offset - 0xc00) * 4 + GIC_BASE_IRQ;
494 if (irq >= GIC_NIRQ)
495 goto bad_reg;
496 if (irq < 32)
497 value |= 0xaa;
498 for (i = 0; i < 4; i++) {
499 if (value & (1 << (i * 2))) {
500 GIC_SET_MODEL(irq + i);
501 } else {
502 GIC_CLEAR_MODEL(irq + i);
504 if (value & (2 << (i * 2))) {
505 GIC_SET_TRIGGER(irq + i);
506 } else {
507 GIC_CLEAR_TRIGGER(irq + i);
510 #endif
511 } else {
512 /* 0xf00 is only handled for 32-bit writes. */
513 goto bad_reg;
515 gic_update(s);
516 return;
517 bad_reg:
518 hw_error("gic_dist_writeb: Bad offset %x\n", (int)offset);
521 static void gic_dist_writew(void *opaque, target_phys_addr_t offset,
522 uint32_t value)
524 gic_dist_writeb(opaque, offset, value & 0xff);
525 gic_dist_writeb(opaque, offset + 1, value >> 8);
528 static void gic_dist_writel(void *opaque, target_phys_addr_t offset,
529 uint32_t value)
531 gic_state *s = (gic_state *)opaque;
532 #ifdef NVIC
533 uint32_t addr;
534 addr = offset;
535 if (addr < 0x100 || (addr > 0xd00 && addr != 0xf00)) {
536 nvic_writel(s, addr, value);
537 return;
539 #endif
540 if (offset == 0xf00) {
541 int cpu;
542 int irq;
543 int mask;
545 cpu = gic_get_current_cpu();
546 irq = value & 0x3ff;
547 switch ((value >> 24) & 3) {
548 case 0:
549 mask = (value >> 16) & ALL_CPU_MASK;
550 break;
551 case 1:
552 mask = 1 << cpu;
553 break;
554 case 2:
555 mask = ALL_CPU_MASK ^ (1 << cpu);
556 break;
557 default:
558 DPRINTF("Bad Soft Int target filter\n");
559 mask = ALL_CPU_MASK;
560 break;
562 GIC_SET_PENDING(irq, mask);
563 gic_update(s);
564 return;
566 gic_dist_writew(opaque, offset, value & 0xffff);
567 gic_dist_writew(opaque, offset + 2, value >> 16);
570 static CPUReadMemoryFunc * const gic_dist_readfn[] = {
571 gic_dist_readb,
572 gic_dist_readw,
573 gic_dist_readl
576 static CPUWriteMemoryFunc * const gic_dist_writefn[] = {
577 gic_dist_writeb,
578 gic_dist_writew,
579 gic_dist_writel
582 #ifndef NVIC
583 static uint32_t gic_cpu_read(gic_state *s, int cpu, int offset)
585 switch (offset) {
586 case 0x00: /* Control */
587 return s->cpu_enabled[cpu];
588 case 0x04: /* Priority mask */
589 return s->priority_mask[cpu];
590 case 0x08: /* Binary Point */
591 /* ??? Not implemented. */
592 return 0;
593 case 0x0c: /* Acknowledge */
594 return gic_acknowledge_irq(s, cpu);
595 case 0x14: /* Runing Priority */
596 return s->running_priority[cpu];
597 case 0x18: /* Highest Pending Interrupt */
598 return s->current_pending[cpu];
599 default:
600 hw_error("gic_cpu_read: Bad offset %x\n", (int)offset);
601 return 0;
605 static void gic_cpu_write(gic_state *s, int cpu, int offset, uint32_t value)
607 switch (offset) {
608 case 0x00: /* Control */
609 s->cpu_enabled[cpu] = (value & 1);
610 DPRINTF("CPU %d %sabled\n", cpu, s->cpu_enabled ? "En" : "Dis");
611 break;
612 case 0x04: /* Priority mask */
613 s->priority_mask[cpu] = (value & 0xff);
614 break;
615 case 0x08: /* Binary Point */
616 /* ??? Not implemented. */
617 break;
618 case 0x10: /* End Of Interrupt */
619 return gic_complete_irq(s, cpu, value & 0x3ff);
620 default:
621 hw_error("gic_cpu_write: Bad offset %x\n", (int)offset);
622 return;
624 gic_update(s);
626 #endif
628 static void gic_reset(gic_state *s)
630 int i;
631 memset(s->irq_state, 0, GIC_NIRQ * sizeof(gic_irq_state));
632 for (i = 0 ; i < NUM_CPU(s); i++) {
633 s->priority_mask[i] = 0xf0;
634 s->current_pending[i] = 1023;
635 s->running_irq[i] = 1023;
636 s->running_priority[i] = 0x100;
637 #ifdef NVIC
638 /* The NVIC doesn't have per-cpu interfaces, so enable by default. */
639 s->cpu_enabled[i] = 1;
640 #else
641 s->cpu_enabled[i] = 0;
642 #endif
644 for (i = 0; i < 16; i++) {
645 GIC_SET_ENABLED(i);
646 GIC_SET_TRIGGER(i);
648 #ifdef NVIC
649 /* The NVIC is always enabled. */
650 s->enabled = 1;
651 #else
652 s->enabled = 0;
653 #endif
656 static void gic_save(QEMUFile *f, void *opaque)
658 gic_state *s = (gic_state *)opaque;
659 int i;
660 int j;
662 qemu_put_be32(f, s->enabled);
663 for (i = 0; i < NUM_CPU(s); i++) {
664 qemu_put_be32(f, s->cpu_enabled[i]);
665 #ifndef NVIC
666 qemu_put_be32(f, s->irq_target[i]);
667 #endif
668 for (j = 0; j < 32; j++)
669 qemu_put_be32(f, s->priority1[j][i]);
670 for (j = 0; j < GIC_NIRQ; j++)
671 qemu_put_be32(f, s->last_active[j][i]);
672 qemu_put_be32(f, s->priority_mask[i]);
673 qemu_put_be32(f, s->running_irq[i]);
674 qemu_put_be32(f, s->running_priority[i]);
675 qemu_put_be32(f, s->current_pending[i]);
677 for (i = 0; i < GIC_NIRQ - 32; i++) {
678 qemu_put_be32(f, s->priority2[i]);
680 for (i = 0; i < GIC_NIRQ; i++) {
681 qemu_put_byte(f, s->irq_state[i].enabled);
682 qemu_put_byte(f, s->irq_state[i].pending);
683 qemu_put_byte(f, s->irq_state[i].active);
684 qemu_put_byte(f, s->irq_state[i].level);
685 qemu_put_byte(f, s->irq_state[i].model);
686 qemu_put_byte(f, s->irq_state[i].trigger);
690 static int gic_load(QEMUFile *f, void *opaque, int version_id)
692 gic_state *s = (gic_state *)opaque;
693 int i;
694 int j;
696 if (version_id != 1)
697 return -EINVAL;
699 s->enabled = qemu_get_be32(f);
700 for (i = 0; i < NUM_CPU(s); i++) {
701 s->cpu_enabled[i] = qemu_get_be32(f);
702 #ifndef NVIC
703 s->irq_target[i] = qemu_get_be32(f);
704 #endif
705 for (j = 0; j < 32; j++)
706 s->priority1[j][i] = qemu_get_be32(f);
707 for (j = 0; j < GIC_NIRQ; j++)
708 s->last_active[j][i] = qemu_get_be32(f);
709 s->priority_mask[i] = qemu_get_be32(f);
710 s->running_irq[i] = qemu_get_be32(f);
711 s->running_priority[i] = qemu_get_be32(f);
712 s->current_pending[i] = qemu_get_be32(f);
714 for (i = 0; i < GIC_NIRQ - 32; i++) {
715 s->priority2[i] = qemu_get_be32(f);
717 for (i = 0; i < GIC_NIRQ; i++) {
718 s->irq_state[i].enabled = qemu_get_byte(f);
719 s->irq_state[i].pending = qemu_get_byte(f);
720 s->irq_state[i].active = qemu_get_byte(f);
721 s->irq_state[i].level = qemu_get_byte(f);
722 s->irq_state[i].model = qemu_get_byte(f);
723 s->irq_state[i].trigger = qemu_get_byte(f);
726 return 0;
729 #if NCPU > 1
730 static void gic_init(gic_state *s, int num_cpu)
731 #else
732 static void gic_init(gic_state *s)
733 #endif
735 int i;
737 #if NCPU > 1
738 s->num_cpu = num_cpu;
739 #endif
740 qdev_init_gpio_in(&s->busdev.qdev, gic_set_irq, GIC_NIRQ - 32);
741 for (i = 0; i < NUM_CPU(s); i++) {
742 sysbus_init_irq(&s->busdev, &s->parent_irq[i]);
744 s->iomemtype = cpu_register_io_memory(gic_dist_readfn,
745 gic_dist_writefn, s);
746 gic_reset(s);
747 register_savevm(NULL, "arm_gic", -1, 1, gic_save, gic_load, s);