qmp-commands.hx

   1 HXCOMM QMP dispatch table and documentation
   2 HXCOMM Text between SQMP and EQMP is copied to the QMP documention file and
   3 HXCOMM does not show up in the other formats.
   4
   5 SQMP
   6                         QMP Supported Commands
   7                         ----------------------
   8
   9 This document describes all commands currently supported by QMP.
  10
  11 Most of the time their usage is exactly the same as in the user Monitor, this
  12 means that any other document which also describe commands (the manpage,
  13 QEMU's manual, etc) can and should be consulted.
  14
  15 QMP has two types of commands: regular and query commands. Regular commands
  16 usually change the Virtual Machine's state someway, while query commands just
  17 return information. The sections below are divided accordingly.
  18
  19 It's important to observe that all communication examples are formatted in
  20 a reader-friendly way, so that they're easier to understand. However, in real
  21 protocol usage, they're emitted as a single line.
  22
  23 Also, the following notation is used to denote data flow:
  24
  25 -> data issued by the Client
  26 <- Server data response
  27
  28 Please, refer to the QMP specification (QMP/qmp-spec.txt) for detailed
  29 information on the Server command and response formats.
  30
  31 NOTE: This document is temporary and will be replaced soon.
  32
  33 1. Stability Considerations
  34 ===========================
  35
  36 The current QMP command set (described in this file) may be useful for a
  37 number of use cases, however it's limited and several commands have bad
  38 defined semantics, specially with regard to command completion.
  39
  40 These problems are going to be solved incrementally in the next QEMU releases
  41 and we're going to establish a deprecation policy for badly defined commands.
  42
  43 If you're planning to adopt QMP, please observe the following:
  44
  45     1. The deprecation policy will take effect and be documented soon, please
  46        check the documentation of each used command as soon as a new release of
  47        QEMU is available
  48
  49     2. DO NOT rely on anything which is not explicit documented
  50
  51     3. Errors, in special, are not documented. Applications should NOT check
  52        for specific errors classes or data (it's strongly recommended to only
  53        check for the "error" key)
  54
  55 2. Regular Commands
  56 ===================
  57
  58 Server's responses in the examples below are always a success response, please
  59 refer to the QMP specification for more details on error responses.
  60
  61 EQMP
  62
  63     {
  64         .name       = "quit",
  65         .args_type  = "",
  66         .params     = "",
  67         .help       = "quit the emulator",
  68         .user_print = monitor_user_noop,
  69         .mhandler.cmd_new = do_quit,
  70     },
  71
  72 SQMP
  73 quit
  74 ----
  75
  76 Quit the emulator.
  77
  78 Arguments: None.
  79
  80 Example:
  81
  82 -> { "execute": "quit" }
  83 <- { "return": {} }
  84
  85 EQMP
  86
  87     {
  88         .name       = "eject",
  89         .args_type  = "force:-f,device:B",
  90         .params     = "[-f] device",
  91         .help       = "eject a removable medium (use -f to force it)",
  92         .user_print = monitor_user_noop,
  93         .mhandler.cmd_new = do_eject,
  94     },
  95
  96 SQMP
  97 eject
  98 -----
  99
 100 Eject a removable medium.
 101
 102 Arguments:
 103
 104 - force: force ejection (json-bool, optional)
 105 - device: device name (json-string)
 106
 107 Example:
 108
 109 -> { "execute": "eject", "arguments": { "device": "ide1-cd0" } }
 110 <- { "return": {} }
 111
 112 Note: The "force" argument defaults to false.
 113
 114 EQMP
 115
 116     {
 117         .name       = "change",
 118         .args_type  = "device:B,target:F,arg:s?",
 119         .params     = "device filename [format]",
 120         .help       = "change a removable medium, optional format",
 121         .user_print = monitor_user_noop,
 122         .mhandler.cmd_new = do_change,
 123     },
 124
 125 SQMP
 126 change
 127 ------
 128
 129 Change a removable medium or VNC configuration.
 130
 131 Arguments:
 132
 133 - "device": device name (json-string)
 134 - "target": filename or item (json-string)
 135 - "arg": additional argument (json-string, optional)
 136
 137 Examples:
 138
 139 1. Change a removable medium
 140
 141 -> { "execute": "change",
 142              "arguments": { "device": "ide1-cd0",
 143                             "target": "/srv/images/Fedora-12-x86_64-DVD.iso" } }
 144 <- { "return": {} }
 145
 146 2. Change VNC password
 147
 148 -> { "execute": "change",
 149              "arguments": { "device": "vnc", "target": "password",
 150                             "arg": "foobar1" } }
 151 <- { "return": {} }
 152
 153 EQMP
 154
 155     {
 156         .name       = "screendump",
 157         .args_type  = "filename:F",
 158         .params     = "filename",
 159         .help       = "save screen into PPM image 'filename'",
 160         .user_print = monitor_user_noop,
 161         .mhandler.cmd_new = do_screen_dump,
 162     },
 163
 164 SQMP
 165 screendump
 166 ----------
 167
 168 Save screen into PPM image.
 169
 170 Arguments:
 171
 172 - "filename": file path (json-string)
 173
 174 Example:
 175
 176 -> { "execute": "screendump", "arguments": { "filename": "/tmp/image" } }
 177 <- { "return": {} }
 178
 179 EQMP
 180
 181     {
 182         .name       = "stop",
 183         .args_type  = "",
 184         .params     = "",
 185         .help       = "stop emulation",
 186         .user_print = monitor_user_noop,
 187         .mhandler.cmd_new = do_stop,
 188     },
 189
 190 SQMP
 191 stop
 192 ----
 193
 194 Stop the emulator.
 195
 196 Arguments: None.
 197
 198 Example:
 199
 200 -> { "execute": "stop" }
 201 <- { "return": {} }
 202
 203 EQMP
 204
 205     {
 206         .name       = "cont",
 207         .args_type  = "",
 208         .params     = "",
 209         .help       = "resume emulation",
 210         .user_print = monitor_user_noop,
 211         .mhandler.cmd_new = do_cont,
 212     },
 213
 214 SQMP
 215 cont
 216 ----
 217
 218 Resume emulation.
 219
 220 Arguments: None.
 221
 222 Example:
 223
 224 -> { "execute": "cont" }
 225 <- { "return": {} }
 226
 227 EQMP
 228
 229     {
 230         .name       = "system_reset",
 231         .args_type  = "",
 232         .params     = "",
 233         .help       = "reset the system",
 234         .user_print = monitor_user_noop,
 235         .mhandler.cmd_new = do_system_reset,
 236     },
 237
 238 SQMP
 239 system_reset
 240 ------------
 241
 242 Reset the system.
 243
 244 Arguments: None.
 245
 246 Example:
 247
 248 -> { "execute": "system_reset" }
 249 <- { "return": {} }
 250
 251 EQMP
 252
 253     {
 254         .name       = "system_powerdown",
 255         .args_type  = "",
 256         .params     = "",
 257         .help       = "send system power down event",
 258         .user_print = monitor_user_noop,
 259         .mhandler.cmd_new = do_system_powerdown,
 260     },
 261
 262 SQMP
 263 system_powerdown
 264 ----------------
 265
 266 Send system power down event.
 267
 268 Arguments: None.
 269
 270 Example:
 271
 272 -> { "execute": "system_powerdown" }
 273 <- { "return": {} }
 274
 275 EQMP
 276
 277     {
 278         .name       = "device_add",
 279         .args_type  = "device:O",
 280         .params     = "driver[,prop=value][,...]",
 281         .help       = "add device, like -device on the command line",
 282         .user_print = monitor_user_noop,
 283         .mhandler.cmd_new = do_device_add,
 284     },
 285
 286 SQMP
 287 device_add
 288 ----------
 289
 290 Add a device.
 291
 292 Arguments:
 293
 294 - "driver": the name of the new device's driver (json-string)
 295 - "bus": the device's parent bus (device tree path, json-string, optional)
 296 - "id": the device's ID, must be unique (json-string)
 297 - device properties
 298
 299 Example:
 300
 301 -> { "execute": "device_add", "arguments": { "driver": "e1000", "id": "net1" } }
 302 <- { "return": {} }
 303
 304 Notes:
 305
 306 (1) For detailed information about this command, please refer to the
 307     'docs/qdev-device-use.txt' file.
 308
 309 (2) It's possible to list device properties by running QEMU with the
 310     "-device DEVICE,\?" command-line argument, where DEVICE is the device's name
 311
 312 EQMP
 313
 314     {
 315         .name       = "device_del",
 316         .args_type  = "id:s",
 317         .params     = "device",
 318         .help       = "remove device",
 319         .user_print = monitor_user_noop,
 320         .mhandler.cmd_new = do_device_del,
 321     },
 322
 323 SQMP
 324 device_del
 325 ----------
 326
 327 Remove a device.
 328
 329 Arguments:
 330
 331 - "id": the device's ID (json-string)
 332
 333 Example:
 334
 335 -> { "execute": "device_del", "arguments": { "id": "net1" } }
 336 <- { "return": {} }
 337
 338 EQMP
 339
 340     {
 341         .name       = "cpu",
 342         .args_type  = "index:i",
 343         .params     = "index",
 344         .help       = "set the default CPU",
 345         .user_print = monitor_user_noop,
 346         .mhandler.cmd_new = do_cpu_set,
 347     },
 348
 349 SQMP
 350 cpu
 351 ---
 352
 353 Set the default CPU.
 354
 355 Arguments:
 356
 357 - "index": the CPU's index (json-int)
 358
 359 Example:
 360
 361 -> { "execute": "cpu", "arguments": { "index": 0 } }
 362 <- { "return": {} }
 363
 364 Note: CPUs' indexes are obtained with the 'query-cpus' command.
 365
 366 EQMP
 367
 368     {
 369         .name       = "memsave",
 370         .args_type  = "val:l,size:i,filename:s",
 371         .params     = "addr size file",
 372         .help       = "save to disk virtual memory dump starting at 'addr' of size 'size'",
 373         .user_print = monitor_user_noop,
 374         .mhandler.cmd_new = do_memory_save,
 375     },
 376
 377 SQMP
 378 memsave
 379 -------
 380
 381 Save to disk virtual memory dump starting at 'val' of size 'size'.
 382
 383 Arguments:
 384
 385 - "val": the starting address (json-int)
 386 - "size": the memory size, in bytes (json-int)
 387 - "filename": file path (json-string)
 388
 389 Example:
 390
 391 -> { "execute": "memsave",
 392              "arguments": { "val": 10,
 393                             "size": 100,
 394                             "filename": "/tmp/virtual-mem-dump" } }
 395 <- { "return": {} }
 396
 397 Note: Depends on the current CPU.
 398
 399 EQMP
 400
 401     {
 402         .name       = "pmemsave",
 403         .args_type  = "val:l,size:i,filename:s",
 404         .params     = "addr size file",
 405         .help       = "save to disk physical memory dump starting at 'addr' of size 'size'",
 406         .user_print = monitor_user_noop,
 407         .mhandler.cmd_new = do_physical_memory_save,
 408     },
 409
 410 SQMP
 411 pmemsave
 412 --------
 413
 414 Save to disk physical memory dump starting at 'val' of size 'size'.
 415
 416 Arguments:
 417
 418 - "val": the starting address (json-int)
 419 - "size": the memory size, in bytes (json-int)
 420 - "filename": file path (json-string)
 421
 422 Example:
 423
 424 -> { "execute": "pmemsave",
 425              "arguments": { "val": 10,
 426                             "size": 100,
 427                             "filename": "/tmp/physical-mem-dump" } }
 428 <- { "return": {} }
 429
 430 EQMP
 431
 432     {
 433         .name       = "inject-nmi",
 434         .args_type  = "",
 435         .params     = "",
 436         .help       = "",
 437         .user_print = monitor_user_noop,
 438         .mhandler.cmd_new = do_inject_nmi,
 439     },
 440
 441 SQMP
 442 inject-nmi
 443 ----------
 444
 445 Inject an NMI on guest's CPUs.
 446
 447 Arguments: None.
 448
 449 Example:
 450
 451 -> { "execute": "inject-nmi" }
 452 <- { "return": {} }
 453
 454 Note: inject-nmi is only supported for x86 guest currently, it will
 455       returns "Unsupported" error for non-x86 guest.
 456
 457 EQMP
 458
 459     {
 460         .name       = "migrate",
 461         .args_type  = "detach:-d,blk:-b,inc:-i,uri:s",
 462         .params     = "[-d] [-b] [-i] uri",
 463         .help       = "migrate to URI (using -d to not wait for completion)"
 464                       "\n\t\t\t -b for migration without shared storage with"
 465                       " full copy of disk\n\t\t\t -i for migration without "
 466                       "shared storage with incremental copy of disk "
 467                       "(base image shared between src and destination)",
 468         .user_print = monitor_user_noop,
 469         .mhandler.cmd_new = do_migrate,
 470     },
 471
 472 SQMP
 473 migrate
 474 -------
 475
 476 Migrate to URI.
 477
 478 Arguments:
 479
 480 - "blk": block migration, full disk copy (json-bool, optional)
 481 - "inc": incremental disk copy (json-bool, optional)
 482 - "uri": Destination URI (json-string)
 483
 484 Example:
 485
 486 -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } }
 487 <- { "return": {} }
 488
 489 Notes:
 490
 491 (1) The 'query-migrate' command should be used to check migration's progress
 492     and final result (this information is provided by the 'status' member)
 493 (2) All boolean arguments default to false
 494 (3) The user Monitor's "detach" argument is invalid in QMP and should not
 495     be used
 496
 497 EQMP
 498
 499     {
 500         .name       = "migrate_cancel",
 501         .args_type  = "",
 502         .params     = "",
 503         .help       = "cancel the current VM migration",
 504         .user_print = monitor_user_noop,
 505         .mhandler.cmd_new = do_migrate_cancel,
 506     },
 507
 508 SQMP
 509 migrate_cancel
 510 --------------
 511
 512 Cancel the current migration.
 513
 514 Arguments: None.
 515
 516 Example:
 517
 518 -> { "execute": "migrate_cancel" }
 519 <- { "return": {} }
 520
 521 EQMP
 522
 523     {
 524         .name       = "migrate_set_speed",
 525         .args_type  = "value:o",
 526         .params     = "value",
 527         .help       = "set maximum speed (in bytes) for migrations",
 528         .user_print = monitor_user_noop,
 529         .mhandler.cmd_new = do_migrate_set_speed,
 530     },
 531
 532 SQMP
 533 migrate_set_speed
 534 -----------------
 535
 536 Set maximum speed for migrations.
 537
 538 Arguments:
 539
 540 - "value": maximum speed, in bytes per second (json-int)
 541
 542 Example:
 543
 544 -> { "execute": "migrate_set_speed", "arguments": { "value": 1024 } }
 545 <- { "return": {} }
 546
 547 EQMP
 548
 549     {
 550         .name       = "migrate_set_downtime",
 551         .args_type  = "value:T",
 552         .params     = "value",
 553         .help       = "set maximum tolerated downtime (in seconds) for migrations",
 554         .user_print = monitor_user_noop,
 555         .mhandler.cmd_new = do_migrate_set_downtime,
 556     },
 557
 558 SQMP
 559 migrate_set_downtime
 560 --------------------
 561
 562 Set maximum tolerated downtime (in seconds) for migrations.
 563
 564 Arguments:
 565
 566 - "value": maximum downtime (json-number)
 567
 568 Example:
 569
 570 -> { "execute": "migrate_set_downtime", "arguments": { "value": 0.1 } }
 571 <- { "return": {} }
 572
 573 EQMP
 574
 575     {
 576         .name       = "client_migrate_info",
 577         .args_type  = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",
 578         .params     = "protocol hostname port tls-port cert-subject",
 579         .help       = "send migration info to spice/vnc client",
 580         .user_print = monitor_user_noop,
 581         .mhandler.cmd_new = client_migrate_info,
 582     },
 583
 584 SQMP
 585 client_migrate_info
 586 ------------------
 587
 588 Set the spice/vnc connection info for the migration target.  The spice/vnc
 589 server will ask the spice/vnc client to automatically reconnect using the
 590 new parameters (if specified) once the vm migration finished successfully.
 591
 592 Arguments:
 593
 594 - "protocol":     protocol: "spice" or "vnc" (json-string)
 595 - "hostname":     migration target hostname (json-string)
 596 - "port":         spice/vnc tcp port for plaintext channels (json-int, optional)
 597 - "tls-port":     spice tcp port for tls-secured channels (json-int, optional)
 598 - "cert-subject": server certificate subject (json-string, optional)
 599
 600 Example:
 601
 602 -> { "execute": "client_migrate_info",
 603      "arguments": { "protocol": "spice",
 604                     "hostname": "virt42.lab.kraxel.org",
 605                     "port": 1234 } }
 606 <- { "return": {} }
 607
 608 EQMP
 609
 610     {
 611         .name       = "netdev_add",
 612         .args_type  = "netdev:O",
 613         .params     = "[user|tap|socket],id=str[,prop=value][,...]",
 614         .help       = "add host network device",
 615         .user_print = monitor_user_noop,
 616         .mhandler.cmd_new = do_netdev_add,
 617     },
 618
 619 SQMP
 620 netdev_add
 621 ----------
 622
 623 Add host network device.
 624
 625 Arguments:
 626
 627 - "type": the device type, "tap", "user", ... (json-string)
 628 - "id": the device's ID, must be unique (json-string)
 629 - device options
 630
 631 Example:
 632
 633 -> { "execute": "netdev_add", "arguments": { "type": "user", "id": "netdev1" } }
 634 <- { "return": {} }
 635
 636 Note: The supported device options are the same ones supported by the '-net'
 637       command-line argument, which are listed in the '-help' output or QEMU's
 638       manual
 639
 640 EQMP
 641
 642     {
 643         .name       = "netdev_del",
 644         .args_type  = "id:s",
 645         .params     = "id",
 646         .help       = "remove host network device",
 647         .user_print = monitor_user_noop,
 648         .mhandler.cmd_new = do_netdev_del,
 649     },
 650
 651 SQMP
 652 netdev_del
 653 ----------
 654
 655 Remove host network device.
 656
 657 Arguments:
 658
 659 - "id": the device's ID, must be unique (json-string)
 660
 661 Example:
 662
 663 -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } }
 664 <- { "return": {} }
 665
 666
 667 EQMP
 668
 669     {
 670         .name       = "block_resize",
 671         .args_type  = "device:B,size:o",
 672         .params     = "device size",
 673         .help       = "resize a block image",
 674         .user_print = monitor_user_noop,
 675         .mhandler.cmd_new = do_block_resize,
 676     },
 677
 678 SQMP
 679 block_resize
 680 ------------
 681
 682 Resize a block image while a guest is running.
 683
 684 Arguments:
 685
 686 - "device": the device's ID, must be unique (json-string)
 687 - "size": new size
 688
 689 Example:
 690
 691 -> { "execute": "block_resize", "arguments": { "device": "scratch", "size": 1073741824 } }
 692 <- { "return": {} }
 693
 694 EQMP
 695
 696     {
 697         .name       = "blockdev-snapshot-sync",
 698         .args_type  = "device:B,snapshot-file:s?,format:s?",
 699         .params     = "device [new-image-file] [format]",
 700         .user_print = monitor_user_noop,
 701         .mhandler.cmd_new = do_snapshot_blkdev,
 702     },
 703
 704 SQMP
 705 blockdev-snapshot-sync
 706 ----------------------
 707
 708 Synchronous snapshot of a block device. snapshot-file specifies the
 709 target of the new image. If the file exists, or if it is a device, the
 710 snapshot will be created in the existing file/device. If does not
 711 exist, a new file will be created. format specifies the format of the
 712 snapshot image, default is qcow2.
 713
 714 Arguments:
 715
 716 - "device": device name to snapshot (json-string)
 717 - "snapshot-file": name of new image file (json-string)
 718 - "format": format of new image (json-string, optional)
 719
 720 Example:
 721
 722 -> { "execute": "blockdev-snapshot", "arguments": { "device": "ide-hd0",
 723                                                     "snapshot-file":
 724                                                     "/some/place/my-image",
 725                                                     "format": "qcow2" } }
 726 <- { "return": {} }
 727
 728 EQMP
 729
 730     {
 731         .name       = "balloon",
 732         .args_type  = "value:M",
 733         .params     = "target",
 734         .help       = "request VM to change its memory allocation (in MB)",
 735         .user_print = monitor_user_noop,
 736         .mhandler.cmd_async = do_balloon,
 737         .flags      = MONITOR_CMD_ASYNC,
 738     },
 739
 740 SQMP
 741 balloon
 742 -------
 743
 744 Request VM to change its memory allocation (in bytes).
 745
 746 Arguments:
 747
 748 - "value": New memory allocation (json-int)
 749
 750 Example:
 751
 752 -> { "execute": "balloon", "arguments": { "value": 536870912 } }
 753 <- { "return": {} }
 754
 755 EQMP
 756
 757     {
 758         .name       = "set_link",
 759         .args_type  = "name:s,up:b",
 760         .params     = "name on|off",
 761         .help       = "change the link status of a network adapter",
 762         .user_print = monitor_user_noop,
 763         .mhandler.cmd_new = do_set_link,
 764     },
 765
 766 SQMP
 767 set_link
 768 --------
 769
 770 Change the link status of a network adapter.
 771
 772 Arguments:
 773
 774 - "name": network device name (json-string)
 775 - "up": status is up (json-bool)
 776
 777 Example:
 778
 779 -> { "execute": "set_link", "arguments": { "name": "e1000.0", "up": false } }
 780 <- { "return": {} }
 781
 782 EQMP
 783
 784     {
 785         .name       = "getfd",
 786         .args_type  = "fdname:s",
 787         .params     = "getfd name",
 788         .help       = "receive a file descriptor via SCM rights and assign it a name",
 789         .user_print = monitor_user_noop,
 790         .mhandler.cmd_new = do_getfd,
 791     },
 792
 793 SQMP
 794 getfd
 795 -----
 796
 797 Receive a file descriptor via SCM rights and assign it a name.
 798
 799 Arguments:
 800
 801 - "fdname": file descriptor name (json-string)
 802
 803 Example:
 804
 805 -> { "execute": "getfd", "arguments": { "fdname": "fd1" } }
 806 <- { "return": {} }
 807
 808 EQMP
 809
 810     {
 811         .name       = "closefd",
 812         .args_type  = "fdname:s",
 813         .params     = "closefd name",
 814         .help       = "close a file descriptor previously passed via SCM rights",
 815         .user_print = monitor_user_noop,
 816         .mhandler.cmd_new = do_closefd,
 817     },
 818
 819 SQMP
 820 closefd
 821 -------
 822
 823 Close a file descriptor previously passed via SCM rights.
 824
 825 Arguments:
 826
 827 - "fdname": file descriptor name (json-string)
 828
 829 Example:
 830
 831 -> { "execute": "closefd", "arguments": { "fdname": "fd1" } }
 832 <- { "return": {} }
 833
 834 EQMP
 835
 836     {
 837         .name       = "block_passwd",
 838         .args_type  = "device:B,password:s",
 839         .params     = "block_passwd device password",
 840         .help       = "set the password of encrypted block devices",
 841         .user_print = monitor_user_noop,
 842         .mhandler.cmd_new = do_block_set_passwd,
 843     },
 844
 845 SQMP
 846 block_passwd
 847 ------------
 848
 849 Set the password of encrypted block devices.
 850
 851 Arguments:
 852
 853 - "device": device name (json-string)
 854 - "password": password (json-string)
 855
 856 Example:
 857
 858 -> { "execute": "block_passwd", "arguments": { "device": "ide0-hd0",
 859                                                "password": "12345" } }
 860 <- { "return": {} }
 861
 862 EQMP
 863
 864     {
 865         .name       = "set_password",
 866         .args_type  = "protocol:s,password:s,connected:s?",
 867         .params     = "protocol password action-if-connected",
 868         .help       = "set spice/vnc password",
 869         .user_print = monitor_user_noop,
 870         .mhandler.cmd_new = set_password,
 871     },
 872
 873 SQMP
 874 set_password
 875 ------------
 876
 877 Set the password for vnc/spice protocols.
 878
 879 Arguments:
 880
 881 - "protocol": protocol name (json-string)
 882 - "password": password (json-string)
 883 - "connected": [ keep | disconnect | fail ] (josn-string, optional)
 884
 885 Example:
 886
 887 -> { "execute": "set_password", "arguments": { "protocol": "vnc",
 888                                                "password": "secret" } }
 889 <- { "return": {} }
 890
 891 EQMP
 892
 893     {
 894         .name       = "expire_password",
 895         .args_type  = "protocol:s,time:s",
 896         .params     = "protocol time",
 897         .help       = "set spice/vnc password expire-time",
 898         .user_print = monitor_user_noop,
 899         .mhandler.cmd_new = expire_password,
 900     },
 901
 902 SQMP
 903 expire_password
 904 ---------------
 905
 906 Set the password expire time for vnc/spice protocols.
 907
 908 Arguments:
 909
 910 - "protocol": protocol name (json-string)
 911 - "time": [ now | never | +secs | secs ] (json-string)
 912
 913 Example:
 914
 915 -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
 916                                                   "time": "+60" } }
 917 <- { "return": {} }
 918
 919 EQMP
 920
 921     {
 922         .name       = "add_client",
 923         .args_type  = "protocol:s,fdname:s,skipauth:b?",
 924         .params     = "protocol fdname skipauth",
 925         .help       = "add a graphics client",
 926         .user_print = monitor_user_noop,
 927         .mhandler.cmd_new = add_graphics_client,
 928     },
 929
 930 SQMP
 931 add_client
 932 ----------
 933
 934 Add a graphics client
 935
 936 Arguments:
 937
 938 - "protocol": protocol name (json-string)
 939 - "fdname": file descriptor name (json-string)
 940
 941 Example:
 942
 943 -> { "execute": "add_client", "arguments": { "protocol": "vnc",
 944                                              "fdname": "myclient" } }
 945 <- { "return": {} }
 946
 947 EQMP
 948     {
 949         .name       = "qmp_capabilities",
 950         .args_type  = "",
 951         .params     = "",
 952         .help       = "enable QMP capabilities",
 953         .user_print = monitor_user_noop,
 954         .mhandler.cmd_new = do_qmp_capabilities,
 955     },
 956
 957 SQMP
 958 qmp_capabilities
 959 ----------------
 960
 961 Enable QMP capabilities.
 962
 963 Arguments: None.
 964
 965 Example:
 966
 967 -> { "execute": "qmp_capabilities" }
 968 <- { "return": {} }
 969
 970 Note: This command must be issued before issuing any other command.
 971
 972 EQMP
 973
 974     {
 975         .name       = "human-monitor-command",
 976         .args_type  = "command-line:s,cpu-index:i?",
 977         .params     = "",
 978         .help       = "",
 979         .user_print = monitor_user_noop,
 980         .mhandler.cmd_new = do_hmp_passthrough,
 981     },
 982
 983 SQMP
 984 human-monitor-command
 985 ---------------------
 986
 987 Execute a Human Monitor command.
 988
 989 Arguments:
 990
 991 - command-line: the command name and its arguments, just like the
 992                 Human Monitor's shell (json-string)
 993 - cpu-index: select the CPU number to be used by commands which access CPU
 994              data, like 'info registers'. The Monitor selects CPU 0 if this
 995              argument is not provided (json-int, optional)
 996
 997 Example:
 998
 999 -> { "execute": "human-monitor-command", "arguments": { "command-line": "info kvm" } }
1000 <- { "return": "kvm support: enabled\r\n" }
1001
1002 Notes:
1003
1004 (1) The Human Monitor is NOT an stable interface, this means that command
1005     names, arguments and responses can change or be removed at ANY time.
1006     Applications that rely on long term stability guarantees should NOT
1007     use this command
1008
1009 (2) Limitations:
1010
1011     o This command is stateless, this means that commands that depend
1012       on state information (such as getfd) might not work
1013
1014     o Commands that prompt the user for data (eg. 'cont' when the block
1015       device is encrypted) don't currently work
1016
1017 3. Query Commands
1018 =================
1019
1020 HXCOMM Each query command below is inside a SQMP/EQMP section, do NOT change
1021 HXCOMM this! We will possibly move query commands definitions inside those
1022 HXCOMM sections, just like regular commands.
1023
1024 EQMP
1025
1026 SQMP
1027 query-version
1028 -------------
1029
1030 Show QEMU version.
1031
1032 Return a json-object with the following information:
1033
1034 - "qemu": A json-object containing three integer values:
1035     - "major": QEMU's major version (json-int)
1036     - "minor": QEMU's minor version (json-int)
1037     - "micro": QEMU's micro version (json-int)
1038 - "package": package's version (json-string)
1039
1040 Example:
1041
1042 -> { "execute": "query-version" }
1043 <- {
1044       "return":{
1045          "qemu":{
1046             "major":0,
1047             "minor":11,
1048             "micro":5
1049          },
1050          "package":""
1051       }
1052    }
1053
1054 EQMP
1055
1056     {
1057         .name       = "query-version",
1058         .args_type  = "",
1059         .mhandler.cmd_new = qmp_marshal_input_query_version,
1060     },
1061
1062 SQMP
1063 query-commands
1064 --------------
1065
1066 List QMP available commands.
1067
1068 Each command is represented by a json-object, the returned value is a json-array
1069 of all commands.
1070
1071 Each json-object contain:
1072
1073 - "name": command's name (json-string)
1074
1075 Example:
1076
1077 -> { "execute": "query-commands" }
1078 <- {
1079       "return":[
1080          {
1081             "name":"query-balloon"
1082          },
1083          {
1084             "name":"system_powerdown"
1085          }
1086       ]
1087    }
1088
1089 Note: This example has been shortened as the real response is too long.
1090
1091 EQMP
1092
1093 SQMP
1094 query-chardev
1095 -------------
1096
1097 Each device is represented by a json-object. The returned value is a json-array
1098 of all devices.
1099
1100 Each json-object contain the following:
1101
1102 - "label": device's label (json-string)
1103 - "filename": device's file (json-string)
1104
1105 Example:
1106
1107 -> { "execute": "query-chardev" }
1108 <- {
1109       "return":[
1110          {
1111             "label":"monitor",
1112             "filename":"stdio"
1113          },
1114          {
1115             "label":"serial0",
1116             "filename":"vc"
1117          }
1118       ]
1119    }
1120
1121 EQMP
1122
1123 SQMP
1124 query-block
1125 -----------
1126
1127 Show the block devices.
1128
1129 Each block device information is stored in a json-object and the returned value
1130 is a json-array of all devices.
1131
1132 Each json-object contain the following:
1133
1134 - "device": device name (json-string)
1135 - "type": device type (json-string)
1136          - deprecated, retained for backward compatibility
1137          - Possible values: "unknown"
1138 - "removable": true if the device is removable, false otherwise (json-bool)
1139 - "locked": true if the device is locked, false otherwise (json-bool)
1140 - "tray-open": only present if removable, true if the device has a tray,
1141                and it is open (json-bool)
1142 - "inserted": only present if the device is inserted, it is a json-object
1143    containing the following:
1144          - "file": device file name (json-string)
1145          - "ro": true if read-only, false otherwise (json-bool)
1146          - "drv": driver format name (json-string)
1147              - Possible values: "blkdebug", "bochs", "cloop", "cow", "dmg",
1148                                 "file", "file", "ftp", "ftps", "host_cdrom",
1149                                 "host_device", "host_floppy", "http", "https",
1150                                 "nbd", "parallels", "qcow", "qcow2", "raw",
1151                                 "tftp", "vdi", "vmdk", "vpc", "vvfat"
1152          - "backing_file": backing file name (json-string, optional)
1153          - "encrypted": true if encrypted, false otherwise (json-bool)
1154
1155 Example:
1156
1157 -> { "execute": "query-block" }
1158 <- {
1159       "return":[
1160          {
1161             "device":"ide0-hd0",
1162             "locked":false,
1163             "removable":false,
1164             "inserted":{
1165                "ro":false,
1166                "drv":"qcow2",
1167                "encrypted":false,
1168                "file":"disks/test.img"
1169             },
1170             "type":"unknown"
1171          },
1172          {
1173             "device":"ide1-cd0",
1174             "locked":false,
1175             "removable":true,
1176             "type":"unknown"
1177          },
1178          {
1179             "device":"floppy0",
1180             "locked":false,
1181             "removable":true,
1182             "type":"unknown"
1183          },
1184          {
1185             "device":"sd0",
1186             "locked":false,
1187             "removable":true,
1188             "type":"unknown"
1189          }
1190       ]
1191    }
1192
1193 EQMP
1194
1195 SQMP
1196 query-blockstats
1197 ----------------
1198
1199 Show block device statistics.
1200
1201 Each device statistic information is stored in a json-object and the returned
1202 value is a json-array of all devices.
1203
1204 Each json-object contain the following:
1205
1206 - "device": device name (json-string)
1207 - "stats": A json-object with the statistics information, it contains:
1208     - "rd_bytes": bytes read (json-int)
1209     - "wr_bytes": bytes written (json-int)
1210     - "rd_operations": read operations (json-int)
1211     - "wr_operations": write operations (json-int)
1212     - "flush_operations": cache flush operations (json-int)
1213     - "wr_total_time_ns": total time spend on writes in nano-seconds (json-int)
1214     - "rd_total_time_ns": total time spend on reads in nano-seconds (json-int)
1215     - "flush_total_time_ns": total time spend on cache flushes in nano-seconds (json-int)
1216     - "wr_highest_offset": Highest offset of a sector written since the
1217                            BlockDriverState has been opened (json-int)
1218 - "parent": Contains recursively the statistics of the underlying
1219             protocol (e.g. the host file for a qcow2 image). If there is
1220             no underlying protocol, this field is omitted
1221             (json-object, optional)
1222
1223 Example:
1224
1225 -> { "execute": "query-blockstats" }
1226 <- {
1227       "return":[
1228          {
1229             "device":"ide0-hd0",
1230             "parent":{
1231                "stats":{
1232                   "wr_highest_offset":3686448128,
1233                   "wr_bytes":9786368,
1234                   "wr_operations":751,
1235                   "rd_bytes":122567168,
1236                   "rd_operations":36772
1237                   "wr_total_times_ns":313253456
1238                   "rd_total_times_ns":3465673657
1239                   "flush_total_times_ns":49653
1240                   "flush_operations":61,
1241                }
1242             },
1243             "stats":{
1244                "wr_highest_offset":2821110784,
1245                "wr_bytes":9786368,
1246                "wr_operations":692,
1247                "rd_bytes":122739200,
1248                "rd_operations":36604
1249                "flush_operations":51,
1250                "wr_total_times_ns":313253456
1251                "rd_total_times_ns":3465673657
1252                "flush_total_times_ns":49653
1253             }
1254          },
1255          {
1256             "device":"ide1-cd0",
1257             "stats":{
1258                "wr_highest_offset":0,
1259                "wr_bytes":0,
1260                "wr_operations":0,
1261                "rd_bytes":0,
1262                "rd_operations":0
1263                "flush_operations":0,
1264                "wr_total_times_ns":0
1265                "rd_total_times_ns":0
1266                "flush_total_times_ns":0
1267             }
1268          },
1269          {
1270             "device":"floppy0",
1271             "stats":{
1272                "wr_highest_offset":0,
1273                "wr_bytes":0,
1274                "wr_operations":0,
1275                "rd_bytes":0,
1276                "rd_operations":0
1277                "flush_operations":0,
1278                "wr_total_times_ns":0
1279                "rd_total_times_ns":0
1280                "flush_total_times_ns":0
1281             }
1282          },
1283          {
1284             "device":"sd0",
1285             "stats":{
1286                "wr_highest_offset":0,
1287                "wr_bytes":0,
1288                "wr_operations":0,
1289                "rd_bytes":0,
1290                "rd_operations":0
1291                "flush_operations":0,
1292                "wr_total_times_ns":0
1293                "rd_total_times_ns":0
1294                "flush_total_times_ns":0
1295             }
1296          }
1297       ]
1298    }
1299
1300 EQMP
1301
1302 SQMP
1303 query-cpus
1304 ----------
1305
1306 Show CPU information.
1307
1308 Return a json-array. Each CPU is represented by a json-object, which contains:
1309
1310 - "CPU": CPU index (json-int)
1311 - "current": true if this is the current CPU, false otherwise (json-bool)
1312 - "halted": true if the cpu is halted, false otherwise (json-bool)
1313 - Current program counter. The key's name depends on the architecture:
1314      "pc": i386/x86_64 (json-int)
1315      "nip": PPC (json-int)
1316      "pc" and "npc": sparc (json-int)
1317      "PC": mips (json-int)
1318 - "thread_id": ID of the underlying host thread (json-int)
1319
1320 Example:
1321
1322 -> { "execute": "query-cpus" }
1323 <- {
1324       "return":[
1325          {
1326             "CPU":0,
1327             "current":true,
1328             "halted":false,
1329             "pc":3227107138
1330             "thread_id":3134
1331          },
1332          {
1333             "CPU":1,
1334             "current":false,
1335             "halted":true,
1336             "pc":7108165
1337             "thread_id":3135
1338          }
1339       ]
1340    }
1341
1342 EQMP
1343
1344 SQMP
1345 query-pci
1346 ---------
1347
1348 PCI buses and devices information.
1349
1350 The returned value is a json-array of all buses. Each bus is represented by
1351 a json-object, which has a key with a json-array of all PCI devices attached
1352 to it. Each device is represented by a json-object.
1353
1354 The bus json-object contains the following:
1355
1356 - "bus": bus number (json-int)
1357 - "devices": a json-array of json-objects, each json-object represents a
1358              PCI device
1359
1360 The PCI device json-object contains the following:
1361
1362 - "bus": identical to the parent's bus number (json-int)
1363 - "slot": slot number (json-int)
1364 - "function": function number (json-int)
1365 - "class_info": a json-object containing:
1366      - "desc": device class description (json-string, optional)
1367      - "class": device class number (json-int)
1368 - "id": a json-object containing:
1369      - "device": device ID (json-int)
1370      - "vendor": vendor ID (json-int)
1371 - "irq": device's IRQ if assigned (json-int, optional)
1372 - "qdev_id": qdev id string (json-string)
1373 - "pci_bridge": It's a json-object, only present if this device is a
1374                 PCI bridge, contains:
1375      - "bus": bus number (json-int)
1376      - "secondary": secondary bus number (json-int)
1377      - "subordinate": subordinate bus number (json-int)
1378      - "io_range": I/O memory range information, a json-object with the
1379                    following members:
1380                  - "base": base address, in bytes (json-int)
1381                  - "limit": limit address, in bytes (json-int)
1382      - "memory_range": memory range information, a json-object with the
1383                        following members:
1384                  - "base": base address, in bytes (json-int)
1385                  - "limit": limit address, in bytes (json-int)
1386      - "prefetchable_range": Prefetchable memory range information, a
1387                              json-object with the following members:
1388                  - "base": base address, in bytes (json-int)
1389                  - "limit": limit address, in bytes (json-int)
1390      - "devices": a json-array of PCI devices if there's any attached, each
1391                   each element is represented by a json-object, which contains
1392                   the same members of the 'PCI device json-object' described
1393                   above (optional)
1394 - "regions": a json-array of json-objects, each json-object represents a
1395              memory region of this device
1396
1397 The memory range json-object contains the following:
1398
1399 - "base": base memory address (json-int)
1400 - "limit": limit value (json-int)
1401
1402 The region json-object can be an I/O region or a memory region, an I/O region
1403 json-object contains the following:
1404
1405 - "type": "io" (json-string, fixed)
1406 - "bar": BAR number (json-int)
1407 - "address": memory address (json-int)
1408 - "size": memory size (json-int)
1409
1410 A memory region json-object contains the following:
1411
1412 - "type": "memory" (json-string, fixed)
1413 - "bar": BAR number (json-int)
1414 - "address": memory address (json-int)
1415 - "size": memory size (json-int)
1416 - "mem_type_64": true or false (json-bool)
1417 - "prefetch": true or false (json-bool)
1418
1419 Example:
1420
1421 -> { "execute": "query-pci" }
1422 <- {
1423       "return":[
1424          {
1425             "bus":0,
1426             "devices":[
1427                {
1428                   "bus":0,
1429                   "qdev_id":"",
1430                   "slot":0,
1431                   "class_info":{
1432                      "class":1536,
1433                      "desc":"Host bridge"
1434                   },
1435                   "id":{
1436                      "device":32902,
1437                      "vendor":4663
1438                   },
1439                   "function":0,
1440                   "regions":[
1441
1442                   ]
1443                },
1444                {
1445                   "bus":0,
1446                   "qdev_id":"",
1447                   "slot":1,
1448                   "class_info":{
1449                      "class":1537,
1450                      "desc":"ISA bridge"
1451                   },
1452                   "id":{
1453                      "device":32902,
1454                      "vendor":28672
1455                   },
1456                   "function":0,
1457                   "regions":[
1458
1459                   ]
1460                },
1461                {
1462                   "bus":0,
1463                   "qdev_id":"",
1464                   "slot":1,
1465                   "class_info":{
1466                      "class":257,
1467                      "desc":"IDE controller"
1468                   },
1469                   "id":{
1470                      "device":32902,
1471                      "vendor":28688
1472                   },
1473                   "function":1,
1474                   "regions":[
1475                      {
1476                         "bar":4,
1477                         "size":16,
1478                         "address":49152,
1479                         "type":"io"
1480                      }
1481                   ]
1482                },
1483                {
1484                   "bus":0,
1485                   "qdev_id":"",
1486                   "slot":2,
1487                   "class_info":{
1488                      "class":768,
1489                      "desc":"VGA controller"
1490                   },
1491                   "id":{
1492                      "device":4115,
1493                      "vendor":184
1494                   },
1495                   "function":0,
1496                   "regions":[
1497                      {
1498                         "prefetch":true,
1499                         "mem_type_64":false,
1500                         "bar":0,
1501                         "size":33554432,
1502                         "address":4026531840,
1503                         "type":"memory"
1504                      },
1505                      {
1506                         "prefetch":false,
1507                         "mem_type_64":false,
1508                         "bar":1,
1509                         "size":4096,
1510                         "address":4060086272,
1511                         "type":"memory"
1512                      },
1513                      {
1514                         "prefetch":false,
1515                         "mem_type_64":false,
1516                         "bar":6,
1517                         "size":65536,
1518                         "address":-1,
1519                         "type":"memory"
1520                      }
1521                   ]
1522                },
1523                {
1524                   "bus":0,
1525                   "qdev_id":"",
1526                   "irq":11,
1527                   "slot":4,
1528                   "class_info":{
1529                      "class":1280,
1530                      "desc":"RAM controller"
1531                   },
1532                   "id":{
1533                      "device":6900,
1534                      "vendor":4098
1535                   },
1536                   "function":0,
1537                   "regions":[
1538                      {
1539                         "bar":0,
1540                         "size":32,
1541                         "address":49280,
1542                         "type":"io"
1543                      }
1544                   ]
1545                }
1546             ]
1547          }
1548       ]
1549    }
1550
1551 Note: This example has been shortened as the real response is too long.
1552
1553 EQMP
1554
1555 SQMP
1556 query-kvm
1557 ---------
1558
1559 Show KVM information.
1560
1561 Return a json-object with the following information:
1562
1563 - "enabled": true if KVM support is enabled, false otherwise (json-bool)
1564 - "present": true if QEMU has KVM support, false otherwise (json-bool)
1565
1566 Example:
1567
1568 -> { "execute": "query-kvm" }
1569 <- { "return": { "enabled": true, "present": true } }
1570
1571 EQMP
1572
1573     {
1574         .name       = "query-kvm",
1575         .args_type  = "",
1576         .mhandler.cmd_new = qmp_marshal_input_query_kvm,
1577     },
1578
1579 SQMP
1580 query-status
1581 ------------
1582
1583 Return a json-object with the following information:
1584
1585 - "running": true if the VM is running, or false if it is paused (json-bool)
1586 - "singlestep": true if the VM is in single step mode,
1587                 false otherwise (json-bool)
1588 - "status": one of the following values (json-string)
1589     "debug" - QEMU is running on a debugger
1590     "inmigrate" - guest is paused waiting for an incoming migration
1591     "internal-error" - An internal error that prevents further guest
1592     execution has occurred
1593     "io-error" - the last IOP has failed and the device is configured
1594     to pause on I/O errors
1595     "paused" - guest has been paused via the 'stop' command
1596     "postmigrate" - guest is paused following a successful 'migrate'
1597     "prelaunch" - QEMU was started with -S and guest has not started
1598     "finish-migrate" - guest is paused to finish the migration process
1599     "restore-vm" - guest is paused to restore VM state
1600     "running" - guest is actively running
1601     "save-vm" - guest is paused to save the VM state
1602     "shutdown" - guest is shut down (and -no-shutdown is in use)
1603     "watchdog" - the watchdog action is configured to pause and
1604      has been triggered
1605
1606 Example:
1607
1608 -> { "execute": "query-status" }
1609 <- { "return": { "running": true, "singlestep": false, "status": "running" } }
1610
1611 EQMP
1612
1613 SQMP
1614 query-mice
1615 ----------
1616
1617 Show VM mice information.
1618
1619 Each mouse is represented by a json-object, the returned value is a json-array
1620 of all mice.
1621
1622 The mouse json-object contains the following:
1623
1624 - "name": mouse's name (json-string)
1625 - "index": mouse's index (json-int)
1626 - "current": true if this mouse is receiving events, false otherwise (json-bool)
1627 - "absolute": true if the mouse generates absolute input events (json-bool)
1628
1629 Example:
1630
1631 -> { "execute": "query-mice" }
1632 <- {
1633       "return":[
1634          {
1635             "name":"QEMU Microsoft Mouse",
1636             "index":0,
1637             "current":false,
1638             "absolute":false
1639          },
1640          {
1641             "name":"QEMU PS/2 Mouse",
1642             "index":1,
1643             "current":true,
1644             "absolute":true
1645          }
1646       ]
1647    }
1648
1649 EQMP
1650
1651 SQMP
1652 query-vnc
1653 ---------
1654
1655 Show VNC server information.
1656
1657 Return a json-object with server information. Connected clients are returned
1658 as a json-array of json-objects.
1659
1660 The main json-object contains the following:
1661
1662 - "enabled": true or false (json-bool)
1663 - "host": server's IP address (json-string)
1664 - "family": address family (json-string)
1665          - Possible values: "ipv4", "ipv6", "unix", "unknown"
1666 - "service": server's port number (json-string)
1667 - "auth": authentication method (json-string)
1668          - Possible values: "invalid", "none", "ra2", "ra2ne", "sasl", "tight",
1669                             "tls", "ultra", "unknown", "vencrypt", "vencrypt",
1670                             "vencrypt+plain", "vencrypt+tls+none",
1671                             "vencrypt+tls+plain", "vencrypt+tls+sasl",
1672                             "vencrypt+tls+vnc", "vencrypt+x509+none",
1673                             "vencrypt+x509+plain", "vencrypt+x509+sasl",
1674                             "vencrypt+x509+vnc", "vnc"
1675 - "clients": a json-array of all connected clients
1676
1677 Clients are described by a json-object, each one contain the following:
1678
1679 - "host": client's IP address (json-string)
1680 - "family": address family (json-string)
1681          - Possible values: "ipv4", "ipv6", "unix", "unknown"
1682 - "service": client's port number (json-string)
1683 - "x509_dname": TLS dname (json-string, optional)
1684 - "sasl_username": SASL username (json-string, optional)
1685
1686 Example:
1687
1688 -> { "execute": "query-vnc" }
1689 <- {
1690       "return":{
1691          "enabled":true,
1692          "host":"0.0.0.0",
1693          "service":"50402",
1694          "auth":"vnc",
1695          "family":"ipv4",
1696          "clients":[
1697             {
1698                "host":"127.0.0.1",
1699                "service":"50401",
1700                "family":"ipv4"
1701             }
1702          ]
1703       }
1704    }
1705
1706 EQMP
1707
1708 SQMP
1709 query-spice
1710 -----------
1711
1712 Show SPICE server information.
1713
1714 Return a json-object with server information. Connected clients are returned
1715 as a json-array of json-objects.
1716
1717 The main json-object contains the following:
1718
1719 - "enabled": true or false (json-bool)
1720 - "host": server's IP address (json-string)
1721 - "port": server's port number (json-int, optional)
1722 - "tls-port": server's port number (json-int, optional)
1723 - "auth": authentication method (json-string)
1724          - Possible values: "none", "spice"
1725 - "channels": a json-array of all active channels clients
1726
1727 Channels are described by a json-object, each one contain the following:
1728
1729 - "host": client's IP address (json-string)
1730 - "family": address family (json-string)
1731          - Possible values: "ipv4", "ipv6", "unix", "unknown"
1732 - "port": client's port number (json-string)
1733 - "connection-id": spice connection id.  All channels with the same id
1734                    belong to the same spice session (json-int)
1735 - "channel-type": channel type.  "1" is the main control channel, filter for
1736                   this one if you want track spice sessions only (json-int)
1737 - "channel-id": channel id.  Usually "0", might be different needed when
1738                 multiple channels of the same type exist, such as multiple
1739                 display channels in a multihead setup (json-int)
1740 - "tls": whevener the channel is encrypted (json-bool)
1741
1742 Example:
1743
1744 -> { "execute": "query-spice" }
1745 <- {
1746       "return": {
1747          "enabled": true,
1748          "auth": "spice",
1749          "port": 5920,
1750          "tls-port": 5921,
1751          "host": "0.0.0.0",
1752          "channels": [
1753             {
1754                "port": "54924",
1755                "family": "ipv4",
1756                "channel-type": 1,
1757                "connection-id": 1804289383,
1758                "host": "127.0.0.1",
1759                "channel-id": 0,
1760                "tls": true
1761             },
1762             {
1763                "port": "36710",
1764                "family": "ipv4",
1765                "channel-type": 4,
1766                "connection-id": 1804289383,
1767                "host": "127.0.0.1",
1768                "channel-id": 0,
1769                "tls": false
1770             },
1771             [ ... more channels follow ... ]
1772          ]
1773       }
1774    }
1775
1776 EQMP
1777
1778 SQMP
1779 query-name
1780 ----------
1781
1782 Show VM name.
1783
1784 Return a json-object with the following information:
1785
1786 - "name": VM's name (json-string, optional)
1787
1788 Example:
1789
1790 -> { "execute": "query-name" }
1791 <- { "return": { "name": "qemu-name" } }
1792
1793 EQMP
1794
1795     {
1796         .name       = "query-name",
1797         .args_type  = "",
1798         .mhandler.cmd_new = qmp_marshal_input_query_name,
1799     },
1800
1801 SQMP
1802 query-uuid
1803 ----------
1804
1805 Show VM UUID.
1806
1807 Return a json-object with the following information:
1808
1809 - "UUID": Universally Unique Identifier (json-string)
1810
1811 Example:
1812
1813 -> { "execute": "query-uuid" }
1814 <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } }
1815
1816 EQMP
1817
1818 SQMP
1819 query-migrate
1820 -------------
1821
1822 Migration status.
1823
1824 Return a json-object. If migration is active there will be another json-object
1825 with RAM migration status and if block migration is active another one with
1826 block migration status.
1827
1828 The main json-object contains the following:
1829
1830 - "status": migration status (json-string)
1831      - Possible values: "active", "completed", "failed", "cancelled"
1832 - "ram": only present if "status" is "active", it is a json-object with the
1833   following RAM information (in bytes):
1834          - "transferred": amount transferred (json-int)
1835          - "remaining": amount remaining (json-int)
1836          - "total": total (json-int)
1837 - "disk": only present if "status" is "active" and it is a block migration,
1838   it is a json-object with the following disk information (in bytes):
1839          - "transferred": amount transferred (json-int)
1840          - "remaining": amount remaining (json-int)
1841          - "total": total (json-int)
1842
1843 Examples:
1844
1845 1. Before the first migration
1846
1847 -> { "execute": "query-migrate" }
1848 <- { "return": {} }
1849
1850 2. Migration is done and has succeeded
1851
1852 -> { "execute": "query-migrate" }
1853 <- { "return": { "status": "completed" } }
1854
1855 3. Migration is done and has failed
1856
1857 -> { "execute": "query-migrate" }
1858 <- { "return": { "status": "failed" } }
1859
1860 4. Migration is being performed and is not a block migration:
1861
1862 -> { "execute": "query-migrate" }
1863 <- {
1864       "return":{
1865          "status":"active",
1866          "ram":{
1867             "transferred":123,
1868             "remaining":123,
1869             "total":246
1870          }
1871       }
1872    }
1873
1874 5. Migration is being performed and is a block migration:
1875
1876 -> { "execute": "query-migrate" }
1877 <- {
1878       "return":{
1879          "status":"active",
1880          "ram":{
1881             "total":1057024,
1882             "remaining":1053304,
1883             "transferred":3720
1884          },
1885          "disk":{
1886             "total":20971520,
1887             "remaining":20880384,
1888             "transferred":91136
1889          }
1890       }
1891    }
1892
1893 EQMP
1894
1895 SQMP
1896 query-balloon
1897 -------------
1898
1899 Show balloon information.
1900
1901 Make an asynchronous request for balloon info. When the request completes a
1902 json-object will be returned containing the following data:
1903
1904 - "actual": current balloon value in bytes (json-int)
1905 - "mem_swapped_in": Amount of memory swapped in bytes (json-int, optional)
1906 - "mem_swapped_out": Amount of memory swapped out in bytes (json-int, optional)
1907 - "major_page_faults": Number of major faults (json-int, optional)
1908 - "minor_page_faults": Number of minor faults (json-int, optional)
1909 - "free_mem": Total amount of free and unused memory in
1910               bytes (json-int, optional)
1911 - "total_mem": Total amount of available memory in bytes (json-int, optional)
1912
1913 Example:
1914
1915 -> { "execute": "query-balloon" }
1916 <- {
1917       "return":{
1918          "actual":1073741824,
1919          "mem_swapped_in":0,
1920          "mem_swapped_out":0,
1921          "major_page_faults":142,
1922          "minor_page_faults":239245,
1923          "free_mem":1014185984,
1924          "total_mem":1044668416
1925       }
1926    }
1927
1928 EQMP
1929