linux-user/qemu.h

   1 #ifndef QEMU_H
   2 #define QEMU_H
   3
   4 #include <signal.h>
   5 #include <string.h>
   6
   7 #include "cpu.h"
   8
   9 #undef DEBUG_REMAP
  10 #ifdef DEBUG_REMAP
  11 #include <stdlib.h>
  12 #endif /* DEBUG_REMAP */
  13
  14 #include "qemu-types.h"
  15
  16 #include "thunk.h"
  17 #include "syscall_defs.h"
  18 #include "syscall.h"
  19 #include "target_signal.h"
  20 #include "gdbstub.h"
  21 #include "qemu-queue.h"
  22
  23 #if defined(CONFIG_USE_NPTL)
  24 #define THREAD __thread
  25 #else
  26 #define THREAD
  27 #endif
  28
  29 /* This struct is used to hold certain information about the image.
  30  * Basically, it replicates in user space what would be certain
  31  * task_struct fields in the kernel
  32  */
  33 struct image_info {
  34         abi_ulong       load_bias;
  35         abi_ulong       load_addr;
  36         abi_ulong       start_code;
  37         abi_ulong       end_code;
  38         abi_ulong       start_data;
  39         abi_ulong       end_data;
  40         abi_ulong       start_brk;
  41         abi_ulong       brk;
  42         abi_ulong       start_mmap;
  43         abi_ulong       mmap;
  44         abi_ulong       rss;
  45         abi_ulong       start_stack;
  46         abi_ulong       stack_limit;
  47         abi_ulong       entry;
  48         abi_ulong       code_offset;
  49         abi_ulong       data_offset;
  50         abi_ulong       saved_auxv;
  51         abi_ulong       arg_start;
  52         abi_ulong       arg_end;
  53         int             personality;
  54 #ifdef CONFIG_USE_FDPIC
  55         abi_ulong       loadmap_addr;
  56         uint16_t        nsegs;
  57         void           *loadsegs;
  58         abi_ulong       pt_dynamic_addr;
  59         struct image_info *other_info;
  60 #endif
  61 };
  62
  63 #ifdef TARGET_I386
  64 /* Information about the current linux thread */
  65 struct vm86_saved_state {
  66     uint32_t eax; /* return code */
  67     uint32_t ebx;
  68     uint32_t ecx;
  69     uint32_t edx;
  70     uint32_t esi;
  71     uint32_t edi;
  72     uint32_t ebp;
  73     uint32_t esp;
  74     uint32_t eflags;
  75     uint32_t eip;
  76     uint16_t cs, ss, ds, es, fs, gs;
  77 };
  78 #endif
  79
  80 #ifdef TARGET_ARM
  81 /* FPU emulator */
  82 #include "nwfpe/fpa11.h"
  83 #endif
  84
  85 #define MAX_SIGQUEUE_SIZE 1024
  86
  87 struct sigqueue {
  88     struct sigqueue *next;
  89     target_siginfo_t info;
  90 };
  91
  92 struct emulated_sigtable {
  93     int pending; /* true if signal is pending */
  94     struct sigqueue *first;
  95     struct sigqueue info; /* in order to always have memory for the
  96                              first signal, we put it here */
  97 };
  98
  99 /* NOTE: we force a big alignment so that the stack stored after is
 100    aligned too */
 101 typedef struct TaskState {
 102     pid_t ts_tid;     /* tid (or pid) of this task */
 103 #ifdef TARGET_ARM
 104     /* FPA state */
 105     FPA11 fpa;
 106     int swi_errno;
 107 #endif
 108 #ifdef TARGET_UNICORE32
 109     int swi_errno;
 110 #endif
 111 #if defined(TARGET_I386) && !defined(TARGET_X86_64)
 112     abi_ulong target_v86;
 113     struct vm86_saved_state vm86_saved_regs;
 114     struct target_vm86plus_struct vm86plus;
 115     uint32_t v86flags;
 116     uint32_t v86mask;
 117 #endif
 118 #ifdef CONFIG_USE_NPTL
 119     abi_ulong child_tidptr;
 120 #endif
 121 #ifdef TARGET_M68K
 122     int sim_syscalls;
 123 #endif
 124 #if defined(TARGET_ARM) || defined(TARGET_M68K) || defined(TARGET_UNICORE32)
 125     /* Extra fields for semihosted binaries.  */
 126     uint32_t stack_base;
 127     uint32_t heap_base;
 128     uint32_t heap_limit;
 129 #endif
 130     int used; /* non zero if used */
 131     struct image_info *info;
 132     struct linux_binprm *bprm;
 133
 134     struct emulated_sigtable sigtab[TARGET_NSIG];
 135     struct sigqueue sigqueue_table[MAX_SIGQUEUE_SIZE]; /* siginfo queue */
 136     struct sigqueue *first_free; /* first free siginfo queue entry */
 137     int signal_pending; /* non zero if a signal may be pending */
 138 } __attribute__((aligned(16))) TaskState;
 139
 140 extern char *exec_path;
 141 void init_task_state(TaskState *ts);
 142 void task_settid(TaskState *);
 143 void stop_all_tasks(void);
 144 extern const char *qemu_uname_release;
 145 extern unsigned long mmap_min_addr;
 146
 147 /* ??? See if we can avoid exposing so much of the loader internals.  */
 148 /*
 149  * MAX_ARG_PAGES defines the number of pages allocated for arguments
 150  * and envelope for the new program. 32 should suffice, this gives
 151  * a maximum env+arg of 128kB w/4KB pages!
 152  */
 153 #define MAX_ARG_PAGES 33
 154
 155 /* Read a good amount of data initially, to hopefully get all the
 156    program headers loaded.  */
 157 #define BPRM_BUF_SIZE  1024
 158
 159 /*
 160  * This structure is used to hold the arguments that are
 161  * used when loading binaries.
 162  */
 163 struct linux_binprm {
 164         char buf[BPRM_BUF_SIZE] __attribute__((aligned));
 165         void *page[MAX_ARG_PAGES];
 166         abi_ulong p;
 167         int fd;
 168         int e_uid, e_gid;
 169         int argc, envc;
 170         char **argv;
 171         char **envp;
 172         char * filename;        /* Name of binary */
 173         int (*core_dump)(int, const CPUState *); /* coredump routine */
 174 };
 175
 176 void do_init_thread(struct target_pt_regs *regs, struct image_info *infop);
 177 abi_ulong loader_build_argptr(int envc, int argc, abi_ulong sp,
 178                               abi_ulong stringp, int push_ptr);
 179 int loader_exec(const char * filename, char ** argv, char ** envp,
 180              struct target_pt_regs * regs, struct image_info *infop,
 181              struct linux_binprm *);
 182
 183 int load_elf_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,
 184                     struct image_info * info);
 185 int load_flt_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,
 186                     struct image_info * info);
 187
 188 abi_long memcpy_to_target(abi_ulong dest, const void *src,
 189                           unsigned long len);
 190 void target_set_brk(abi_ulong new_brk);
 191 abi_long do_brk(abi_ulong new_brk);
 192 void syscall_init(void);
 193 abi_long do_syscall(void *cpu_env, int num, abi_long arg1,
 194                     abi_long arg2, abi_long arg3, abi_long arg4,
 195                     abi_long arg5, abi_long arg6);
 196 void gemu_log(const char *fmt, ...) GCC_FMT_ATTR(1, 2);
 197 extern THREAD CPUState *thread_env;
 198 void cpu_loop(CPUState *env);
 199 char *target_strerror(int err);
 200 int get_osversion(void);
 201 void fork_start(void);
 202 void fork_end(int child);
 203
 204 #include "qemu-log.h"
 205
 206 /* strace.c */
 207 void print_syscall(int num,
 208                    abi_long arg1, abi_long arg2, abi_long arg3,
 209                    abi_long arg4, abi_long arg5, abi_long arg6);
 210 void print_syscall_ret(int num, abi_long arg1);
 211 extern int do_strace;
 212
 213 /* signal.c */
 214 void process_pending_signals(CPUState *cpu_env);
 215 void signal_init(void);
 216 int queue_signal(CPUState *env, int sig, target_siginfo_t *info);
 217 void host_to_target_siginfo(target_siginfo_t *tinfo, const siginfo_t *info);
 218 void target_to_host_siginfo(siginfo_t *info, const target_siginfo_t *tinfo);
 219 int target_to_host_signal(int sig);
 220 int host_to_target_signal(int sig);
 221 long do_sigreturn(CPUState *env);
 222 long do_rt_sigreturn(CPUState *env);
 223 abi_long do_sigaltstack(abi_ulong uss_addr, abi_ulong uoss_addr, abi_ulong sp);
 224
 225 #ifdef TARGET_I386
 226 /* vm86.c */
 227 void save_v86_state(CPUX86State *env);
 228 void handle_vm86_trap(CPUX86State *env, int trapno);
 229 void handle_vm86_fault(CPUX86State *env);
 230 int do_vm86(CPUX86State *env, long subfunction, abi_ulong v86_addr);
 231 #elif defined(TARGET_SPARC64)
 232 void sparc64_set_context(CPUSPARCState *env);
 233 void sparc64_get_context(CPUSPARCState *env);
 234 #endif
 235
 236 /* mmap.c */
 237 int target_mprotect(abi_ulong start, abi_ulong len, int prot);
 238 abi_long target_mmap(abi_ulong start, abi_ulong len, int prot,
 239                      int flags, int fd, abi_ulong offset);
 240 int target_munmap(abi_ulong start, abi_ulong len);
 241 abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size,
 242                        abi_ulong new_size, unsigned long flags,
 243                        abi_ulong new_addr);
 244 int target_msync(abi_ulong start, abi_ulong len, int flags);
 245 extern unsigned long last_brk;
 246 void mmap_lock(void);
 247 void mmap_unlock(void);
 248 abi_ulong mmap_find_vma(abi_ulong, abi_ulong);
 249 void cpu_list_lock(void);
 250 void cpu_list_unlock(void);
 251 #if defined(CONFIG_USE_NPTL)
 252 void mmap_fork_start(void);
 253 void mmap_fork_end(int child);
 254 #endif
 255
 256 /* main.c */
 257 extern unsigned long guest_stack_size;
 258
 259 /* user access */
 260
 261 #define VERIFY_READ 0
 262 #define VERIFY_WRITE 1 /* implies read access */
 263
 264 static inline int access_ok(int type, abi_ulong addr, abi_ulong size)
 265 {
 266     return page_check_range((target_ulong)addr, size,
 267                             (type == VERIFY_READ) ? PAGE_READ : (PAGE_READ | PAGE_WRITE)) == 0;
 268 }
 269
 270 /* NOTE __get_user and __put_user use host pointers and don't check access. */
 271 /* These are usually used to access struct data members once the
 272  * struct has been locked - usually with lock_user_struct().
 273  */
 274 #define __put_user(x, hptr)\
 275 ({\
 276     switch(sizeof(*hptr)) {\
 277     case 1:\
 278         *(uint8_t *)(hptr) = (uint8_t)(typeof(*hptr))(x);\
 279         break;\
 280     case 2:\
 281         *(uint16_t *)(hptr) = tswap16((uint16_t)(typeof(*hptr))(x));\
 282         break;\
 283     case 4:\
 284         *(uint32_t *)(hptr) = tswap32((uint32_t)(typeof(*hptr))(x));\
 285         break;\
 286     case 8:\
 287         *(uint64_t *)(hptr) = tswap64((typeof(*hptr))(x));\
 288         break;\
 289     default:\
 290         abort();\
 291     }\
 292     0;\
 293 })
 294
 295 #define __get_user(x, hptr) \
 296 ({\
 297     switch(sizeof(*hptr)) {\
 298     case 1:\
 299         x = (typeof(*hptr))*(uint8_t *)(hptr);\
 300         break;\
 301     case 2:\
 302         x = (typeof(*hptr))tswap16(*(uint16_t *)(hptr));\
 303         break;\
 304     case 4:\
 305         x = (typeof(*hptr))tswap32(*(uint32_t *)(hptr));\
 306         break;\
 307     case 8:\
 308         x = (typeof(*hptr))tswap64(*(uint64_t *)(hptr));\
 309         break;\
 310     default:\
 311         /* avoid warning */\
 312         x = 0;\
 313         abort();\
 314     }\
 315     0;\
 316 })
 317
 318 /* put_user()/get_user() take a guest address and check access */
 319 /* These are usually used to access an atomic data type, such as an int,
 320  * that has been passed by address.  These internally perform locking
 321  * and unlocking on the data type.
 322  */
 323 #define put_user(x, gaddr, target_type)                                 \
 324 ({                                                                      \
 325     abi_ulong __gaddr = (gaddr);                                        \
 326     target_type *__hptr;                                                \
 327     abi_long __ret;                                                     \
 328     if ((__hptr = lock_user(VERIFY_WRITE, __gaddr, sizeof(target_type), 0))) { \
 329         __ret = __put_user((x), __hptr);                                \
 330         unlock_user(__hptr, __gaddr, sizeof(target_type));              \
 331     } else                                                              \
 332         __ret = -TARGET_EFAULT;                                         \
 333     __ret;                                                              \
 334 })
 335
 336 #define get_user(x, gaddr, target_type)                                 \
 337 ({                                                                      \
 338     abi_ulong __gaddr = (gaddr);                                        \
 339     target_type *__hptr;                                                \
 340     abi_long __ret;                                                     \
 341     if ((__hptr = lock_user(VERIFY_READ, __gaddr, sizeof(target_type), 1))) { \
 342         __ret = __get_user((x), __hptr);                                \
 343         unlock_user(__hptr, __gaddr, 0);                                \
 344     } else {                                                            \
 345         /* avoid warning */                                             \
 346         (x) = 0;                                                        \
 347         __ret = -TARGET_EFAULT;                                         \
 348     }                                                                   \
 349     __ret;                                                              \
 350 })
 351
 352 #define put_user_ual(x, gaddr) put_user((x), (gaddr), abi_ulong)
 353 #define put_user_sal(x, gaddr) put_user((x), (gaddr), abi_long)
 354 #define put_user_u64(x, gaddr) put_user((x), (gaddr), uint64_t)
 355 #define put_user_s64(x, gaddr) put_user((x), (gaddr), int64_t)
 356 #define put_user_u32(x, gaddr) put_user((x), (gaddr), uint32_t)
 357 #define put_user_s32(x, gaddr) put_user((x), (gaddr), int32_t)
 358 #define put_user_u16(x, gaddr) put_user((x), (gaddr), uint16_t)
 359 #define put_user_s16(x, gaddr) put_user((x), (gaddr), int16_t)
 360 #define put_user_u8(x, gaddr)  put_user((x), (gaddr), uint8_t)
 361 #define put_user_s8(x, gaddr)  put_user((x), (gaddr), int8_t)
 362
 363 #define get_user_ual(x, gaddr) get_user((x), (gaddr), abi_ulong)
 364 #define get_user_sal(x, gaddr) get_user((x), (gaddr), abi_long)
 365 #define get_user_u64(x, gaddr) get_user((x), (gaddr), uint64_t)
 366 #define get_user_s64(x, gaddr) get_user((x), (gaddr), int64_t)
 367 #define get_user_u32(x, gaddr) get_user((x), (gaddr), uint32_t)
 368 #define get_user_s32(x, gaddr) get_user((x), (gaddr), int32_t)
 369 #define get_user_u16(x, gaddr) get_user((x), (gaddr), uint16_t)
 370 #define get_user_s16(x, gaddr) get_user((x), (gaddr), int16_t)
 371 #define get_user_u8(x, gaddr)  get_user((x), (gaddr), uint8_t)
 372 #define get_user_s8(x, gaddr)  get_user((x), (gaddr), int8_t)
 373
 374 /* copy_from_user() and copy_to_user() are usually used to copy data
 375  * buffers between the target and host.  These internally perform
 376  * locking/unlocking of the memory.
 377  */
 378 abi_long copy_from_user(void *hptr, abi_ulong gaddr, size_t len);
 379 abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len);
 380
 381 /* Functions for accessing guest memory.  The tget and tput functions
 382    read/write single values, byteswapping as necessary.  The lock_user
 383    gets a pointer to a contiguous area of guest memory, but does not perform
 384    and byteswapping.  lock_user may return either a pointer to the guest
 385    memory, or a temporary buffer.  */
 386
 387 /* Lock an area of guest memory into the host.  If copy is true then the
 388    host area will have the same contents as the guest.  */
 389 static inline void *lock_user(int type, abi_ulong guest_addr, long len, int copy)
 390 {
 391     if (!access_ok(type, guest_addr, len))
 392         return NULL;
 393 #ifdef DEBUG_REMAP
 394     {
 395         void *addr;
 396         addr = malloc(len);
 397         if (copy)
 398             memcpy(addr, g2h(guest_addr), len);
 399         else
 400             memset(addr, 0, len);
 401         return addr;
 402     }
 403 #else
 404     return g2h(guest_addr);
 405 #endif
 406 }
 407
 408 /* Unlock an area of guest memory.  The first LEN bytes must be
 409    flushed back to guest memory. host_ptr = NULL is explicitly
 410    allowed and does nothing. */
 411 static inline void unlock_user(void *host_ptr, abi_ulong guest_addr,
 412                                long len)
 413 {
 414
 415 #ifdef DEBUG_REMAP
 416     if (!host_ptr)
 417         return;
 418     if (host_ptr == g2h(guest_addr))
 419         return;
 420     if (len > 0)
 421         memcpy(g2h(guest_addr), host_ptr, len);
 422     free(host_ptr);
 423 #endif
 424 }
 425
 426 /* Return the length of a string in target memory or -TARGET_EFAULT if
 427    access error. */
 428 abi_long target_strlen(abi_ulong gaddr);
 429
 430 /* Like lock_user but for null terminated strings.  */
 431 static inline void *lock_user_string(abi_ulong guest_addr)
 432 {
 433     abi_long len;
 434     len = target_strlen(guest_addr);
 435     if (len < 0)
 436         return NULL;
 437     return lock_user(VERIFY_READ, guest_addr, (long)(len + 1), 1);
 438 }
 439
 440 /* Helper macros for locking/ulocking a target struct.  */
 441 #define lock_user_struct(type, host_ptr, guest_addr, copy)      \
 442     (host_ptr = lock_user(type, guest_addr, sizeof(*host_ptr), copy))
 443 #define unlock_user_struct(host_ptr, guest_addr, copy)          \
 444     unlock_user(host_ptr, guest_addr, (copy) ? sizeof(*host_ptr) : 0)
 445
 446 #if defined(CONFIG_USE_NPTL)
 447 #include <pthread.h>
 448 #endif
 449
 450 #endif /* QEMU_H */