2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "block/block_int.h"
28 #include "block/blockjob.h"
29 #include "qemu/module.h"
30 #include "qapi/qmp/qjson.h"
31 #include "sysemu/sysemu.h"
32 #include "qemu/notify.h"
33 #include "block/coroutine.h"
34 #include "block/qapi.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
37 #include "qapi-event.h"
40 #include <sys/types.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
53 struct BdrvDirtyBitmap
{
55 QLIST_ENTRY(BdrvDirtyBitmap
) list
;
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
60 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
);
61 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
62 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
63 BlockDriverCompletionFunc
*cb
, void *opaque
);
64 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
65 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
66 BlockDriverCompletionFunc
*cb
, void *opaque
);
67 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
68 int64_t sector_num
, int nb_sectors
,
70 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
71 int64_t sector_num
, int nb_sectors
,
73 static int coroutine_fn
bdrv_co_do_preadv(BlockDriverState
*bs
,
74 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
75 BdrvRequestFlags flags
);
76 static int coroutine_fn
bdrv_co_do_pwritev(BlockDriverState
*bs
,
77 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
78 BdrvRequestFlags flags
);
79 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
83 BdrvRequestFlags flags
,
84 BlockDriverCompletionFunc
*cb
,
87 static void coroutine_fn
bdrv_co_do_rw(void *opaque
);
88 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
89 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
);
91 static QTAILQ_HEAD(, BlockDriverState
) bdrv_states
=
92 QTAILQ_HEAD_INITIALIZER(bdrv_states
);
94 static QTAILQ_HEAD(, BlockDriverState
) graph_bdrv_states
=
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states
);
97 static QLIST_HEAD(, BlockDriver
) bdrv_drivers
=
98 QLIST_HEAD_INITIALIZER(bdrv_drivers
);
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist
;
104 static int is_windows_drive_prefix(const char *filename
)
106 return (((filename
[0] >= 'a' && filename
[0] <= 'z') ||
107 (filename
[0] >= 'A' && filename
[0] <= 'Z')) &&
111 int is_windows_drive(const char *filename
)
113 if (is_windows_drive_prefix(filename
) &&
116 if (strstart(filename
, "\\\\.\\", NULL
) ||
117 strstart(filename
, "//./", NULL
))
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState
*bs
,
129 throttle_config(&bs
->throttle_state
, cfg
);
131 for (i
= 0; i
< 2; i
++) {
132 qemu_co_enter_next(&bs
->throttled_reqs
[i
]);
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState
*bs
)
139 bool drained
= false;
140 bool enabled
= bs
->io_limits_enabled
;
143 bs
->io_limits_enabled
= false;
145 for (i
= 0; i
< 2; i
++) {
146 while (qemu_co_enter_next(&bs
->throttled_reqs
[i
])) {
151 bs
->io_limits_enabled
= enabled
;
156 void bdrv_io_limits_disable(BlockDriverState
*bs
)
158 bs
->io_limits_enabled
= false;
160 bdrv_start_throttled_reqs(bs
);
162 throttle_destroy(&bs
->throttle_state
);
165 static void bdrv_throttle_read_timer_cb(void *opaque
)
167 BlockDriverState
*bs
= opaque
;
168 qemu_co_enter_next(&bs
->throttled_reqs
[0]);
171 static void bdrv_throttle_write_timer_cb(void *opaque
)
173 BlockDriverState
*bs
= opaque
;
174 qemu_co_enter_next(&bs
->throttled_reqs
[1]);
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState
*bs
)
180 assert(!bs
->io_limits_enabled
);
181 throttle_init(&bs
->throttle_state
,
182 bdrv_get_aio_context(bs
),
184 bdrv_throttle_read_timer_cb
,
185 bdrv_throttle_write_timer_cb
,
187 bs
->io_limits_enabled
= true;
190 /* This function makes an IO wait if needed
192 * @nb_sectors: the number of sectors of the IO
193 * @is_write: is the IO a write
195 static void bdrv_io_limits_intercept(BlockDriverState
*bs
,
199 /* does this io must wait */
200 bool must_wait
= throttle_schedule_timer(&bs
->throttle_state
, is_write
);
202 /* if must wait or any request of this type throttled queue the IO */
204 !qemu_co_queue_empty(&bs
->throttled_reqs
[is_write
])) {
205 qemu_co_queue_wait(&bs
->throttled_reqs
[is_write
]);
208 /* the IO will be executed, do the accounting */
209 throttle_account(&bs
->throttle_state
, is_write
, bytes
);
212 /* if the next request must wait -> do nothing */
213 if (throttle_schedule_timer(&bs
->throttle_state
, is_write
)) {
217 /* else queue next request for execution */
218 qemu_co_queue_next(&bs
->throttled_reqs
[is_write
]);
221 size_t bdrv_opt_mem_align(BlockDriverState
*bs
)
223 if (!bs
|| !bs
->drv
) {
224 /* 4k should be on the safe side */
228 return bs
->bl
.opt_mem_alignment
;
231 /* check if the path starts with "<protocol>:" */
232 static int path_has_protocol(const char *path
)
237 if (is_windows_drive(path
) ||
238 is_windows_drive_prefix(path
)) {
241 p
= path
+ strcspn(path
, ":/\\");
243 p
= path
+ strcspn(path
, ":/");
249 int path_is_absolute(const char *path
)
252 /* specific case for names like: "\\.\d:" */
253 if (is_windows_drive(path
) || is_windows_drive_prefix(path
)) {
256 return (*path
== '/' || *path
== '\\');
258 return (*path
== '/');
262 /* if filename is absolute, just copy it to dest. Otherwise, build a
263 path to it by considering it is relative to base_path. URL are
265 void path_combine(char *dest
, int dest_size
,
266 const char *base_path
,
267 const char *filename
)
274 if (path_is_absolute(filename
)) {
275 pstrcpy(dest
, dest_size
, filename
);
277 p
= strchr(base_path
, ':');
282 p1
= strrchr(base_path
, '/');
286 p2
= strrchr(base_path
, '\\');
298 if (len
> dest_size
- 1)
300 memcpy(dest
, base_path
, len
);
302 pstrcat(dest
, dest_size
, filename
);
306 void bdrv_get_full_backing_filename(BlockDriverState
*bs
, char *dest
, size_t sz
)
308 if (bs
->backing_file
[0] == '\0' || path_has_protocol(bs
->backing_file
)) {
309 pstrcpy(dest
, sz
, bs
->backing_file
);
311 path_combine(dest
, sz
, bs
->filename
, bs
->backing_file
);
315 void bdrv_register(BlockDriver
*bdrv
)
317 /* Block drivers without coroutine functions need emulation */
318 if (!bdrv
->bdrv_co_readv
) {
319 bdrv
->bdrv_co_readv
= bdrv_co_readv_em
;
320 bdrv
->bdrv_co_writev
= bdrv_co_writev_em
;
322 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
323 * the block driver lacks aio we need to emulate that too.
325 if (!bdrv
->bdrv_aio_readv
) {
326 /* add AIO emulation layer */
327 bdrv
->bdrv_aio_readv
= bdrv_aio_readv_em
;
328 bdrv
->bdrv_aio_writev
= bdrv_aio_writev_em
;
332 QLIST_INSERT_HEAD(&bdrv_drivers
, bdrv
, list
);
335 /* create a new block device (by default it is empty) */
336 BlockDriverState
*bdrv_new(const char *device_name
, Error
**errp
)
338 BlockDriverState
*bs
;
341 if (bdrv_find(device_name
)) {
342 error_setg(errp
, "Device with id '%s' already exists",
346 if (bdrv_find_node(device_name
)) {
347 error_setg(errp
, "Device with node-name '%s' already exists",
352 bs
= g_malloc0(sizeof(BlockDriverState
));
353 QLIST_INIT(&bs
->dirty_bitmaps
);
354 pstrcpy(bs
->device_name
, sizeof(bs
->device_name
), device_name
);
355 if (device_name
[0] != '\0') {
356 QTAILQ_INSERT_TAIL(&bdrv_states
, bs
, device_list
);
358 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
359 QLIST_INIT(&bs
->op_blockers
[i
]);
361 bdrv_iostatus_disable(bs
);
362 notifier_list_init(&bs
->close_notifiers
);
363 notifier_with_return_list_init(&bs
->before_write_notifiers
);
364 qemu_co_queue_init(&bs
->throttled_reqs
[0]);
365 qemu_co_queue_init(&bs
->throttled_reqs
[1]);
367 bs
->aio_context
= qemu_get_aio_context();
372 void bdrv_add_close_notifier(BlockDriverState
*bs
, Notifier
*notify
)
374 notifier_list_add(&bs
->close_notifiers
, notify
);
377 BlockDriver
*bdrv_find_format(const char *format_name
)
380 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
381 if (!strcmp(drv1
->format_name
, format_name
)) {
388 static int bdrv_is_whitelisted(BlockDriver
*drv
, bool read_only
)
390 static const char *whitelist_rw
[] = {
391 CONFIG_BDRV_RW_WHITELIST
393 static const char *whitelist_ro
[] = {
394 CONFIG_BDRV_RO_WHITELIST
398 if (!whitelist_rw
[0] && !whitelist_ro
[0]) {
399 return 1; /* no whitelist, anything goes */
402 for (p
= whitelist_rw
; *p
; p
++) {
403 if (!strcmp(drv
->format_name
, *p
)) {
408 for (p
= whitelist_ro
; *p
; p
++) {
409 if (!strcmp(drv
->format_name
, *p
)) {
417 BlockDriver
*bdrv_find_whitelisted_format(const char *format_name
,
420 BlockDriver
*drv
= bdrv_find_format(format_name
);
421 return drv
&& bdrv_is_whitelisted(drv
, read_only
) ? drv
: NULL
;
424 typedef struct CreateCo
{
432 static void coroutine_fn
bdrv_create_co_entry(void *opaque
)
434 Error
*local_err
= NULL
;
437 CreateCo
*cco
= opaque
;
440 ret
= cco
->drv
->bdrv_create(cco
->filename
, cco
->opts
, &local_err
);
442 error_propagate(&cco
->err
, local_err
);
447 int bdrv_create(BlockDriver
*drv
, const char* filename
,
448 QemuOpts
*opts
, Error
**errp
)
455 .filename
= g_strdup(filename
),
461 if (!drv
->bdrv_create
) {
462 error_setg(errp
, "Driver '%s' does not support image creation", drv
->format_name
);
467 if (qemu_in_coroutine()) {
468 /* Fast-path if already in coroutine context */
469 bdrv_create_co_entry(&cco
);
471 co
= qemu_coroutine_create(bdrv_create_co_entry
);
472 qemu_coroutine_enter(co
, &cco
);
473 while (cco
.ret
== NOT_DONE
) {
481 error_propagate(errp
, cco
.err
);
483 error_setg_errno(errp
, -ret
, "Could not create image");
488 g_free(cco
.filename
);
492 int bdrv_create_file(const char *filename
, QemuOpts
*opts
, Error
**errp
)
495 Error
*local_err
= NULL
;
498 drv
= bdrv_find_protocol(filename
, true);
500 error_setg(errp
, "Could not find protocol for file '%s'", filename
);
504 ret
= bdrv_create(drv
, filename
, opts
, &local_err
);
506 error_propagate(errp
, local_err
);
511 int bdrv_refresh_limits(BlockDriverState
*bs
)
513 BlockDriver
*drv
= bs
->drv
;
515 memset(&bs
->bl
, 0, sizeof(bs
->bl
));
521 /* Take some limits from the children as a default */
523 bdrv_refresh_limits(bs
->file
);
524 bs
->bl
.opt_transfer_length
= bs
->file
->bl
.opt_transfer_length
;
525 bs
->bl
.opt_mem_alignment
= bs
->file
->bl
.opt_mem_alignment
;
527 bs
->bl
.opt_mem_alignment
= 512;
530 if (bs
->backing_hd
) {
531 bdrv_refresh_limits(bs
->backing_hd
);
532 bs
->bl
.opt_transfer_length
=
533 MAX(bs
->bl
.opt_transfer_length
,
534 bs
->backing_hd
->bl
.opt_transfer_length
);
535 bs
->bl
.opt_mem_alignment
=
536 MAX(bs
->bl
.opt_mem_alignment
,
537 bs
->backing_hd
->bl
.opt_mem_alignment
);
540 /* Then let the driver override it */
541 if (drv
->bdrv_refresh_limits
) {
542 return drv
->bdrv_refresh_limits(bs
);
549 * Create a uniquely-named empty temporary file.
550 * Return 0 upon success, otherwise a negative errno value.
552 int get_tmp_filename(char *filename
, int size
)
555 char temp_dir
[MAX_PATH
];
556 /* GetTempFileName requires that its output buffer (4th param)
557 have length MAX_PATH or greater. */
558 assert(size
>= MAX_PATH
);
559 return (GetTempPath(MAX_PATH
, temp_dir
)
560 && GetTempFileName(temp_dir
, "qem", 0, filename
)
561 ? 0 : -GetLastError());
565 tmpdir
= getenv("TMPDIR");
569 if (snprintf(filename
, size
, "%s/vl.XXXXXX", tmpdir
) >= size
) {
572 fd
= mkstemp(filename
);
576 if (close(fd
) != 0) {
585 * Detect host devices. By convention, /dev/cdrom[N] is always
586 * recognized as a host CDROM.
588 static BlockDriver
*find_hdev_driver(const char *filename
)
590 int score_max
= 0, score
;
591 BlockDriver
*drv
= NULL
, *d
;
593 QLIST_FOREACH(d
, &bdrv_drivers
, list
) {
594 if (d
->bdrv_probe_device
) {
595 score
= d
->bdrv_probe_device(filename
);
596 if (score
> score_max
) {
606 BlockDriver
*bdrv_find_protocol(const char *filename
,
607 bool allow_protocol_prefix
)
614 /* TODO Drivers without bdrv_file_open must be specified explicitly */
617 * XXX(hch): we really should not let host device detection
618 * override an explicit protocol specification, but moving this
619 * later breaks access to device names with colons in them.
620 * Thanks to the brain-dead persistent naming schemes on udev-
621 * based Linux systems those actually are quite common.
623 drv1
= find_hdev_driver(filename
);
628 if (!path_has_protocol(filename
) || !allow_protocol_prefix
) {
629 return bdrv_find_format("file");
632 p
= strchr(filename
, ':');
635 if (len
> sizeof(protocol
) - 1)
636 len
= sizeof(protocol
) - 1;
637 memcpy(protocol
, filename
, len
);
638 protocol
[len
] = '\0';
639 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
640 if (drv1
->protocol_name
&&
641 !strcmp(drv1
->protocol_name
, protocol
)) {
648 static int find_image_format(BlockDriverState
*bs
, const char *filename
,
649 BlockDriver
**pdrv
, Error
**errp
)
651 int score
, score_max
;
652 BlockDriver
*drv1
, *drv
;
656 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
657 if (bs
->sg
|| !bdrv_is_inserted(bs
) || bdrv_getlength(bs
) == 0) {
658 drv
= bdrv_find_format("raw");
660 error_setg(errp
, "Could not find raw image format");
667 ret
= bdrv_pread(bs
, 0, buf
, sizeof(buf
));
669 error_setg_errno(errp
, -ret
, "Could not read image for determining its "
677 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
678 if (drv1
->bdrv_probe
) {
679 score
= drv1
->bdrv_probe(buf
, ret
, filename
);
680 if (score
> score_max
) {
687 error_setg(errp
, "Could not determine image format: No compatible "
696 * Set the current 'total_sectors' value
698 static int refresh_total_sectors(BlockDriverState
*bs
, int64_t hint
)
700 BlockDriver
*drv
= bs
->drv
;
702 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
706 /* query actual device if possible, otherwise just trust the hint */
707 if (drv
->bdrv_getlength
) {
708 int64_t length
= drv
->bdrv_getlength(bs
);
712 hint
= DIV_ROUND_UP(length
, BDRV_SECTOR_SIZE
);
715 bs
->total_sectors
= hint
;
720 * Set open flags for a given discard mode
722 * Return 0 on success, -1 if the discard mode was invalid.
724 int bdrv_parse_discard_flags(const char *mode
, int *flags
)
726 *flags
&= ~BDRV_O_UNMAP
;
728 if (!strcmp(mode
, "off") || !strcmp(mode
, "ignore")) {
730 } else if (!strcmp(mode
, "on") || !strcmp(mode
, "unmap")) {
731 *flags
|= BDRV_O_UNMAP
;
740 * Set open flags for a given cache mode
742 * Return 0 on success, -1 if the cache mode was invalid.
744 int bdrv_parse_cache_flags(const char *mode
, int *flags
)
746 *flags
&= ~BDRV_O_CACHE_MASK
;
748 if (!strcmp(mode
, "off") || !strcmp(mode
, "none")) {
749 *flags
|= BDRV_O_NOCACHE
| BDRV_O_CACHE_WB
;
750 } else if (!strcmp(mode
, "directsync")) {
751 *flags
|= BDRV_O_NOCACHE
;
752 } else if (!strcmp(mode
, "writeback")) {
753 *flags
|= BDRV_O_CACHE_WB
;
754 } else if (!strcmp(mode
, "unsafe")) {
755 *flags
|= BDRV_O_CACHE_WB
;
756 *flags
|= BDRV_O_NO_FLUSH
;
757 } else if (!strcmp(mode
, "writethrough")) {
758 /* this is the default */
767 * The copy-on-read flag is actually a reference count so multiple users may
768 * use the feature without worrying about clobbering its previous state.
769 * Copy-on-read stays enabled until all users have called to disable it.
771 void bdrv_enable_copy_on_read(BlockDriverState
*bs
)
776 void bdrv_disable_copy_on_read(BlockDriverState
*bs
)
778 assert(bs
->copy_on_read
> 0);
783 * Returns the flags that a temporary snapshot should get, based on the
784 * originally requested flags (the originally requested image will have flags
785 * like a backing file)
787 static int bdrv_temp_snapshot_flags(int flags
)
789 return (flags
& ~BDRV_O_SNAPSHOT
) | BDRV_O_TEMPORARY
;
793 * Returns the flags that bs->file should get, based on the given flags for
796 static int bdrv_inherited_flags(int flags
)
798 /* Enable protocol handling, disable format probing for bs->file */
799 flags
|= BDRV_O_PROTOCOL
;
801 /* Our block drivers take care to send flushes and respect unmap policy,
802 * so we can enable both unconditionally on lower layers. */
803 flags
|= BDRV_O_CACHE_WB
| BDRV_O_UNMAP
;
805 /* Clear flags that only apply to the top layer */
806 flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
| BDRV_O_COPY_ON_READ
);
812 * Returns the flags that bs->backing_hd should get, based on the given flags
815 static int bdrv_backing_flags(int flags
)
817 /* backing files always opened read-only */
818 flags
&= ~(BDRV_O_RDWR
| BDRV_O_COPY_ON_READ
);
820 /* snapshot=on is handled on the top layer */
821 flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_TEMPORARY
);
826 static int bdrv_open_flags(BlockDriverState
*bs
, int flags
)
828 int open_flags
= flags
| BDRV_O_CACHE_WB
;
831 * Clear flags that are internal to the block layer before opening the
834 open_flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
| BDRV_O_PROTOCOL
);
837 * Snapshots should be writable.
839 if (flags
& BDRV_O_TEMPORARY
) {
840 open_flags
|= BDRV_O_RDWR
;
846 static void bdrv_assign_node_name(BlockDriverState
*bs
,
847 const char *node_name
,
854 /* empty string node name is invalid */
855 if (node_name
[0] == '\0') {
856 error_setg(errp
, "Empty node name");
860 /* takes care of avoiding namespaces collisions */
861 if (bdrv_find(node_name
)) {
862 error_setg(errp
, "node-name=%s is conflicting with a device id",
867 /* takes care of avoiding duplicates node names */
868 if (bdrv_find_node(node_name
)) {
869 error_setg(errp
, "Duplicate node name");
873 /* copy node name into the bs and insert it into the graph list */
874 pstrcpy(bs
->node_name
, sizeof(bs
->node_name
), node_name
);
875 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs
, node_list
);
879 * Common part for opening disk images and files
881 * Removes all processed options from *options.
883 static int bdrv_open_common(BlockDriverState
*bs
, BlockDriverState
*file
,
884 QDict
*options
, int flags
, BlockDriver
*drv
, Error
**errp
)
887 const char *filename
;
888 const char *node_name
= NULL
;
889 Error
*local_err
= NULL
;
892 assert(bs
->file
== NULL
);
893 assert(options
!= NULL
&& bs
->options
!= options
);
896 filename
= file
->filename
;
898 filename
= qdict_get_try_str(options
, "filename");
901 if (drv
->bdrv_needs_filename
&& !filename
) {
902 error_setg(errp
, "The '%s' block driver requires a file name",
907 trace_bdrv_open_common(bs
, filename
?: "", flags
, drv
->format_name
);
909 node_name
= qdict_get_try_str(options
, "node-name");
910 bdrv_assign_node_name(bs
, node_name
, &local_err
);
912 error_propagate(errp
, local_err
);
915 qdict_del(options
, "node-name");
917 /* bdrv_open() with directly using a protocol as drv. This layer is already
918 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
919 * and return immediately. */
920 if (file
!= NULL
&& drv
->bdrv_file_open
) {
925 bs
->open_flags
= flags
;
926 bs
->guest_block_size
= 512;
927 bs
->request_alignment
= 512;
928 bs
->zero_beyond_eof
= true;
929 open_flags
= bdrv_open_flags(bs
, flags
);
930 bs
->read_only
= !(open_flags
& BDRV_O_RDWR
);
931 bs
->growable
= !!(flags
& BDRV_O_PROTOCOL
);
933 if (use_bdrv_whitelist
&& !bdrv_is_whitelisted(drv
, bs
->read_only
)) {
935 !bs
->read_only
&& bdrv_is_whitelisted(drv
, true)
936 ? "Driver '%s' can only be used for read-only devices"
937 : "Driver '%s' is not whitelisted",
942 assert(bs
->copy_on_read
== 0); /* bdrv_new() and bdrv_close() make it so */
943 if (flags
& BDRV_O_COPY_ON_READ
) {
944 if (!bs
->read_only
) {
945 bdrv_enable_copy_on_read(bs
);
947 error_setg(errp
, "Can't use copy-on-read on read-only device");
952 if (filename
!= NULL
) {
953 pstrcpy(bs
->filename
, sizeof(bs
->filename
), filename
);
955 bs
->filename
[0] = '\0';
959 bs
->opaque
= g_malloc0(drv
->instance_size
);
961 bs
->enable_write_cache
= !!(flags
& BDRV_O_CACHE_WB
);
963 /* Open the image, either directly or using a protocol */
964 if (drv
->bdrv_file_open
) {
965 assert(file
== NULL
);
966 assert(!drv
->bdrv_needs_filename
|| filename
!= NULL
);
967 ret
= drv
->bdrv_file_open(bs
, options
, open_flags
, &local_err
);
970 error_setg(errp
, "Can't use '%s' as a block driver for the "
971 "protocol level", drv
->format_name
);
976 ret
= drv
->bdrv_open(bs
, options
, open_flags
, &local_err
);
981 error_propagate(errp
, local_err
);
982 } else if (bs
->filename
[0]) {
983 error_setg_errno(errp
, -ret
, "Could not open '%s'", bs
->filename
);
985 error_setg_errno(errp
, -ret
, "Could not open image");
990 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
992 error_setg_errno(errp
, -ret
, "Could not refresh total sector count");
996 bdrv_refresh_limits(bs
);
997 assert(bdrv_opt_mem_align(bs
) != 0);
998 assert((bs
->request_alignment
!= 0) || bs
->sg
);
1009 static QDict
*parse_json_filename(const char *filename
, Error
**errp
)
1011 QObject
*options_obj
;
1015 ret
= strstart(filename
, "json:", &filename
);
1018 options_obj
= qobject_from_json(filename
);
1020 error_setg(errp
, "Could not parse the JSON options");
1024 if (qobject_type(options_obj
) != QTYPE_QDICT
) {
1025 qobject_decref(options_obj
);
1026 error_setg(errp
, "Invalid JSON object given");
1030 options
= qobject_to_qdict(options_obj
);
1031 qdict_flatten(options
);
1037 * Fills in default options for opening images and converts the legacy
1038 * filename/flags pair to option QDict entries.
1040 static int bdrv_fill_options(QDict
**options
, const char **pfilename
, int flags
,
1041 BlockDriver
*drv
, Error
**errp
)
1043 const char *filename
= *pfilename
;
1044 const char *drvname
;
1045 bool protocol
= flags
& BDRV_O_PROTOCOL
;
1046 bool parse_filename
= false;
1047 Error
*local_err
= NULL
;
1049 /* Parse json: pseudo-protocol */
1050 if (filename
&& g_str_has_prefix(filename
, "json:")) {
1051 QDict
*json_options
= parse_json_filename(filename
, &local_err
);
1053 error_propagate(errp
, local_err
);
1057 /* Options given in the filename have lower priority than options
1058 * specified directly */
1059 qdict_join(*options
, json_options
, false);
1060 QDECREF(json_options
);
1061 *pfilename
= filename
= NULL
;
1064 /* Fetch the file name from the options QDict if necessary */
1065 if (protocol
&& filename
) {
1066 if (!qdict_haskey(*options
, "filename")) {
1067 qdict_put(*options
, "filename", qstring_from_str(filename
));
1068 parse_filename
= true;
1070 error_setg(errp
, "Can't specify 'file' and 'filename' options at "
1076 /* Find the right block driver */
1077 filename
= qdict_get_try_str(*options
, "filename");
1078 drvname
= qdict_get_try_str(*options
, "driver");
1082 error_setg(errp
, "Driver specified twice");
1085 drvname
= drv
->format_name
;
1086 qdict_put(*options
, "driver", qstring_from_str(drvname
));
1088 if (!drvname
&& protocol
) {
1090 drv
= bdrv_find_protocol(filename
, parse_filename
);
1092 error_setg(errp
, "Unknown protocol");
1096 drvname
= drv
->format_name
;
1097 qdict_put(*options
, "driver", qstring_from_str(drvname
));
1099 error_setg(errp
, "Must specify either driver or file");
1102 } else if (drvname
) {
1103 drv
= bdrv_find_format(drvname
);
1105 error_setg(errp
, "Unknown driver '%s'", drvname
);
1111 assert(drv
|| !protocol
);
1113 /* Driver-specific filename parsing */
1114 if (drv
&& drv
->bdrv_parse_filename
&& parse_filename
) {
1115 drv
->bdrv_parse_filename(filename
, *options
, &local_err
);
1117 error_propagate(errp
, local_err
);
1121 if (!drv
->bdrv_needs_filename
) {
1122 qdict_del(*options
, "filename");
1129 void bdrv_set_backing_hd(BlockDriverState
*bs
, BlockDriverState
*backing_hd
)
1132 if (bs
->backing_hd
) {
1133 assert(bs
->backing_blocker
);
1134 bdrv_op_unblock_all(bs
->backing_hd
, bs
->backing_blocker
);
1135 } else if (backing_hd
) {
1136 error_setg(&bs
->backing_blocker
,
1137 "device is used as backing hd of '%s'",
1141 bs
->backing_hd
= backing_hd
;
1143 error_free(bs
->backing_blocker
);
1144 bs
->backing_blocker
= NULL
;
1147 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
1148 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_hd
->filename
);
1149 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
),
1150 backing_hd
->drv
? backing_hd
->drv
->format_name
: "");
1152 bdrv_op_block_all(bs
->backing_hd
, bs
->backing_blocker
);
1153 /* Otherwise we won't be able to commit due to check in bdrv_commit */
1154 bdrv_op_unblock(bs
->backing_hd
, BLOCK_OP_TYPE_COMMIT
,
1155 bs
->backing_blocker
);
1157 bdrv_refresh_limits(bs
);
1161 * Opens the backing file for a BlockDriverState if not yet open
1163 * options is a QDict of options to pass to the block drivers, or NULL for an
1164 * empty set of options. The reference to the QDict is transferred to this
1165 * function (even on failure), so if the caller intends to reuse the dictionary,
1166 * it needs to use QINCREF() before calling bdrv_file_open.
1168 int bdrv_open_backing_file(BlockDriverState
*bs
, QDict
*options
, Error
**errp
)
1170 char *backing_filename
= g_malloc0(PATH_MAX
);
1172 BlockDriver
*back_drv
= NULL
;
1173 BlockDriverState
*backing_hd
;
1174 Error
*local_err
= NULL
;
1176 if (bs
->backing_hd
!= NULL
) {
1181 /* NULL means an empty set of options */
1182 if (options
== NULL
) {
1183 options
= qdict_new();
1186 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
1187 if (qdict_haskey(options
, "file.filename")) {
1188 backing_filename
[0] = '\0';
1189 } else if (bs
->backing_file
[0] == '\0' && qdict_size(options
) == 0) {
1193 bdrv_get_full_backing_filename(bs
, backing_filename
, PATH_MAX
);
1196 if (!bs
->drv
|| !bs
->drv
->supports_backing
) {
1198 error_setg(errp
, "Driver doesn't support backing files");
1203 backing_hd
= bdrv_new("", errp
);
1205 if (bs
->backing_format
[0] != '\0') {
1206 back_drv
= bdrv_find_format(bs
->backing_format
);
1209 assert(bs
->backing_hd
== NULL
);
1210 ret
= bdrv_open(&backing_hd
,
1211 *backing_filename
? backing_filename
: NULL
, NULL
, options
,
1212 bdrv_backing_flags(bs
->open_flags
), back_drv
, &local_err
);
1214 bdrv_unref(backing_hd
);
1216 bs
->open_flags
|= BDRV_O_NO_BACKING
;
1217 error_setg(errp
, "Could not open backing file: %s",
1218 error_get_pretty(local_err
));
1219 error_free(local_err
);
1222 bdrv_set_backing_hd(bs
, backing_hd
);
1225 g_free(backing_filename
);
1230 * Opens a disk image whose options are given as BlockdevRef in another block
1233 * If allow_none is true, no image will be opened if filename is false and no
1234 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1236 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1237 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1238 * itself, all options starting with "${bdref_key}." are considered part of the
1241 * The BlockdevRef will be removed from the options QDict.
1243 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1245 int bdrv_open_image(BlockDriverState
**pbs
, const char *filename
,
1246 QDict
*options
, const char *bdref_key
, int flags
,
1247 bool allow_none
, Error
**errp
)
1249 QDict
*image_options
;
1251 char *bdref_key_dot
;
1252 const char *reference
;
1255 assert(*pbs
== NULL
);
1257 bdref_key_dot
= g_strdup_printf("%s.", bdref_key
);
1258 qdict_extract_subqdict(options
, &image_options
, bdref_key_dot
);
1259 g_free(bdref_key_dot
);
1261 reference
= qdict_get_try_str(options
, bdref_key
);
1262 if (!filename
&& !reference
&& !qdict_size(image_options
)) {
1266 error_setg(errp
, "A block device must be specified for \"%s\"",
1270 QDECREF(image_options
);
1274 ret
= bdrv_open(pbs
, filename
, reference
, image_options
, flags
, NULL
, errp
);
1277 qdict_del(options
, bdref_key
);
1281 int bdrv_append_temp_snapshot(BlockDriverState
*bs
, int flags
, Error
**errp
)
1283 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1284 char *tmp_filename
= g_malloc0(PATH_MAX
+ 1);
1286 BlockDriver
*bdrv_qcow2
;
1287 QemuOpts
*opts
= NULL
;
1288 QDict
*snapshot_options
;
1289 BlockDriverState
*bs_snapshot
;
1293 /* if snapshot, we create a temporary backing file and open it
1294 instead of opening 'filename' directly */
1296 /* Get the required size from the image */
1297 total_size
= bdrv_getlength(bs
);
1298 if (total_size
< 0) {
1300 error_setg_errno(errp
, -total_size
, "Could not get image size");
1303 total_size
&= BDRV_SECTOR_MASK
;
1305 /* Create the temporary image */
1306 ret
= get_tmp_filename(tmp_filename
, PATH_MAX
+ 1);
1308 error_setg_errno(errp
, -ret
, "Could not get temporary filename");
1312 bdrv_qcow2
= bdrv_find_format("qcow2");
1313 opts
= qemu_opts_create(bdrv_qcow2
->create_opts
, NULL
, 0,
1315 qemu_opt_set_number(opts
, BLOCK_OPT_SIZE
, total_size
);
1316 ret
= bdrv_create(bdrv_qcow2
, tmp_filename
, opts
, &local_err
);
1317 qemu_opts_del(opts
);
1319 error_setg_errno(errp
, -ret
, "Could not create temporary overlay "
1320 "'%s': %s", tmp_filename
,
1321 error_get_pretty(local_err
));
1322 error_free(local_err
);
1326 /* Prepare a new options QDict for the temporary file */
1327 snapshot_options
= qdict_new();
1328 qdict_put(snapshot_options
, "file.driver",
1329 qstring_from_str("file"));
1330 qdict_put(snapshot_options
, "file.filename",
1331 qstring_from_str(tmp_filename
));
1333 bs_snapshot
= bdrv_new("", &error_abort
);
1335 ret
= bdrv_open(&bs_snapshot
, NULL
, NULL
, snapshot_options
,
1336 flags
, bdrv_qcow2
, &local_err
);
1338 error_propagate(errp
, local_err
);
1342 bdrv_append(bs_snapshot
, bs
);
1345 g_free(tmp_filename
);
1350 * Opens a disk image (raw, qcow2, vmdk, ...)
1352 * options is a QDict of options to pass to the block drivers, or NULL for an
1353 * empty set of options. The reference to the QDict belongs to the block layer
1354 * after the call (even on failure), so if the caller intends to reuse the
1355 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1357 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1358 * If it is not NULL, the referenced BDS will be reused.
1360 * The reference parameter may be used to specify an existing block device which
1361 * should be opened. If specified, neither options nor a filename may be given,
1362 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1364 int bdrv_open(BlockDriverState
**pbs
, const char *filename
,
1365 const char *reference
, QDict
*options
, int flags
,
1366 BlockDriver
*drv
, Error
**errp
)
1369 BlockDriverState
*file
= NULL
, *bs
;
1370 const char *drvname
;
1371 Error
*local_err
= NULL
;
1372 int snapshot_flags
= 0;
1377 bool options_non_empty
= options
? qdict_size(options
) : false;
1381 error_setg(errp
, "Cannot reuse an existing BDS when referencing "
1382 "another block device");
1386 if (filename
|| options_non_empty
) {
1387 error_setg(errp
, "Cannot reference an existing block device with "
1388 "additional options or a new filename");
1392 bs
= bdrv_lookup_bs(reference
, reference
, errp
);
1404 bs
= bdrv_new("", &error_abort
);
1407 /* NULL means an empty set of options */
1408 if (options
== NULL
) {
1409 options
= qdict_new();
1412 ret
= bdrv_fill_options(&options
, &filename
, flags
, drv
, &local_err
);
1417 /* Find the right image format driver */
1419 drvname
= qdict_get_try_str(options
, "driver");
1421 drv
= bdrv_find_format(drvname
);
1422 qdict_del(options
, "driver");
1424 error_setg(errp
, "Unknown driver: '%s'", drvname
);
1430 assert(drvname
|| !(flags
& BDRV_O_PROTOCOL
));
1431 if (drv
&& !drv
->bdrv_file_open
) {
1432 /* If the user explicitly wants a format driver here, we'll need to add
1433 * another layer for the protocol in bs->file */
1434 flags
&= ~BDRV_O_PROTOCOL
;
1437 bs
->options
= options
;
1438 options
= qdict_clone_shallow(options
);
1440 /* Open image file without format layer */
1441 if ((flags
& BDRV_O_PROTOCOL
) == 0) {
1442 if (flags
& BDRV_O_RDWR
) {
1443 flags
|= BDRV_O_ALLOW_RDWR
;
1445 if (flags
& BDRV_O_SNAPSHOT
) {
1446 snapshot_flags
= bdrv_temp_snapshot_flags(flags
);
1447 flags
= bdrv_backing_flags(flags
);
1450 assert(file
== NULL
);
1451 ret
= bdrv_open_image(&file
, filename
, options
, "file",
1452 bdrv_inherited_flags(flags
),
1459 /* Image format probing */
1461 ret
= find_image_format(file
, filename
, &drv
, &local_err
);
1466 error_setg(errp
, "Must specify either driver or file");
1471 /* Open the image */
1472 ret
= bdrv_open_common(bs
, file
, options
, flags
, drv
, &local_err
);
1477 if (file
&& (bs
->file
!= file
)) {
1482 /* If there is a backing file, use it */
1483 if ((flags
& BDRV_O_NO_BACKING
) == 0) {
1484 QDict
*backing_options
;
1486 qdict_extract_subqdict(options
, &backing_options
, "backing.");
1487 ret
= bdrv_open_backing_file(bs
, backing_options
, &local_err
);
1489 goto close_and_fail
;
1493 /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1494 * temporary snapshot afterwards. */
1495 if (snapshot_flags
) {
1496 ret
= bdrv_append_temp_snapshot(bs
, snapshot_flags
, &local_err
);
1498 goto close_and_fail
;
1502 /* Check if any unknown options were used */
1503 if (options
&& (qdict_size(options
) != 0)) {
1504 const QDictEntry
*entry
= qdict_first(options
);
1505 if (flags
& BDRV_O_PROTOCOL
) {
1506 error_setg(errp
, "Block protocol '%s' doesn't support the option "
1507 "'%s'", drv
->format_name
, entry
->key
);
1509 error_setg(errp
, "Block format '%s' used by device '%s' doesn't "
1510 "support the option '%s'", drv
->format_name
,
1511 bs
->device_name
, entry
->key
);
1515 goto close_and_fail
;
1518 if (!bdrv_key_required(bs
)) {
1519 bdrv_dev_change_media_cb(bs
, true);
1520 } else if (!runstate_check(RUN_STATE_PRELAUNCH
)
1521 && !runstate_check(RUN_STATE_INMIGRATE
)
1522 && !runstate_check(RUN_STATE_PAUSED
)) { /* HACK */
1524 "Guest must be stopped for opening of encrypted image");
1526 goto close_and_fail
;
1537 QDECREF(bs
->options
);
1541 /* If *pbs is NULL, a new BDS has been created in this function and
1542 needs to be freed now. Otherwise, it does not need to be closed,
1543 since it has not really been opened yet. */
1547 error_propagate(errp
, local_err
);
1552 /* See fail path, but now the BDS has to be always closed */
1560 error_propagate(errp
, local_err
);
1565 typedef struct BlockReopenQueueEntry
{
1567 BDRVReopenState state
;
1568 QSIMPLEQ_ENTRY(BlockReopenQueueEntry
) entry
;
1569 } BlockReopenQueueEntry
;
1572 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1573 * reopen of multiple devices.
1575 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1576 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1577 * be created and initialized. This newly created BlockReopenQueue should be
1578 * passed back in for subsequent calls that are intended to be of the same
1581 * bs is the BlockDriverState to add to the reopen queue.
1583 * flags contains the open flags for the associated bs
1585 * returns a pointer to bs_queue, which is either the newly allocated
1586 * bs_queue, or the existing bs_queue being used.
1589 BlockReopenQueue
*bdrv_reopen_queue(BlockReopenQueue
*bs_queue
,
1590 BlockDriverState
*bs
, int flags
)
1594 BlockReopenQueueEntry
*bs_entry
;
1595 if (bs_queue
== NULL
) {
1596 bs_queue
= g_new0(BlockReopenQueue
, 1);
1597 QSIMPLEQ_INIT(bs_queue
);
1600 /* bdrv_open() masks this flag out */
1601 flags
&= ~BDRV_O_PROTOCOL
;
1604 bdrv_reopen_queue(bs_queue
, bs
->file
, bdrv_inherited_flags(flags
));
1607 bs_entry
= g_new0(BlockReopenQueueEntry
, 1);
1608 QSIMPLEQ_INSERT_TAIL(bs_queue
, bs_entry
, entry
);
1610 bs_entry
->state
.bs
= bs
;
1611 bs_entry
->state
.flags
= flags
;
1617 * Reopen multiple BlockDriverStates atomically & transactionally.
1619 * The queue passed in (bs_queue) must have been built up previous
1620 * via bdrv_reopen_queue().
1622 * Reopens all BDS specified in the queue, with the appropriate
1623 * flags. All devices are prepared for reopen, and failure of any
1624 * device will cause all device changes to be abandonded, and intermediate
1627 * If all devices prepare successfully, then the changes are committed
1631 int bdrv_reopen_multiple(BlockReopenQueue
*bs_queue
, Error
**errp
)
1634 BlockReopenQueueEntry
*bs_entry
, *next
;
1635 Error
*local_err
= NULL
;
1637 assert(bs_queue
!= NULL
);
1641 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1642 if (bdrv_reopen_prepare(&bs_entry
->state
, bs_queue
, &local_err
)) {
1643 error_propagate(errp
, local_err
);
1646 bs_entry
->prepared
= true;
1649 /* If we reach this point, we have success and just need to apply the
1652 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1653 bdrv_reopen_commit(&bs_entry
->state
);
1659 QSIMPLEQ_FOREACH_SAFE(bs_entry
, bs_queue
, entry
, next
) {
1660 if (ret
&& bs_entry
->prepared
) {
1661 bdrv_reopen_abort(&bs_entry
->state
);
1670 /* Reopen a single BlockDriverState with the specified flags. */
1671 int bdrv_reopen(BlockDriverState
*bs
, int bdrv_flags
, Error
**errp
)
1674 Error
*local_err
= NULL
;
1675 BlockReopenQueue
*queue
= bdrv_reopen_queue(NULL
, bs
, bdrv_flags
);
1677 ret
= bdrv_reopen_multiple(queue
, &local_err
);
1678 if (local_err
!= NULL
) {
1679 error_propagate(errp
, local_err
);
1686 * Prepares a BlockDriverState for reopen. All changes are staged in the
1687 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1688 * the block driver layer .bdrv_reopen_prepare()
1690 * bs is the BlockDriverState to reopen
1691 * flags are the new open flags
1692 * queue is the reopen queue
1694 * Returns 0 on success, non-zero on error. On error errp will be set
1697 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1698 * It is the responsibility of the caller to then call the abort() or
1699 * commit() for any other BDS that have been left in a prepare() state
1702 int bdrv_reopen_prepare(BDRVReopenState
*reopen_state
, BlockReopenQueue
*queue
,
1706 Error
*local_err
= NULL
;
1709 assert(reopen_state
!= NULL
);
1710 assert(reopen_state
->bs
->drv
!= NULL
);
1711 drv
= reopen_state
->bs
->drv
;
1713 /* if we are to stay read-only, do not allow permission change
1715 if (!(reopen_state
->bs
->open_flags
& BDRV_O_ALLOW_RDWR
) &&
1716 reopen_state
->flags
& BDRV_O_RDWR
) {
1717 error_set(errp
, QERR_DEVICE_IS_READ_ONLY
,
1718 reopen_state
->bs
->device_name
);
1723 ret
= bdrv_flush(reopen_state
->bs
);
1725 error_set(errp
, ERROR_CLASS_GENERIC_ERROR
, "Error (%s) flushing drive",
1730 if (drv
->bdrv_reopen_prepare
) {
1731 ret
= drv
->bdrv_reopen_prepare(reopen_state
, queue
, &local_err
);
1733 if (local_err
!= NULL
) {
1734 error_propagate(errp
, local_err
);
1736 error_setg(errp
, "failed while preparing to reopen image '%s'",
1737 reopen_state
->bs
->filename
);
1742 /* It is currently mandatory to have a bdrv_reopen_prepare()
1743 * handler for each supported drv. */
1744 error_set(errp
, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED
,
1745 drv
->format_name
, reopen_state
->bs
->device_name
,
1746 "reopening of file");
1758 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1759 * makes them final by swapping the staging BlockDriverState contents into
1760 * the active BlockDriverState contents.
1762 void bdrv_reopen_commit(BDRVReopenState
*reopen_state
)
1766 assert(reopen_state
!= NULL
);
1767 drv
= reopen_state
->bs
->drv
;
1768 assert(drv
!= NULL
);
1770 /* If there are any driver level actions to take */
1771 if (drv
->bdrv_reopen_commit
) {
1772 drv
->bdrv_reopen_commit(reopen_state
);
1775 /* set BDS specific flags now */
1776 reopen_state
->bs
->open_flags
= reopen_state
->flags
;
1777 reopen_state
->bs
->enable_write_cache
= !!(reopen_state
->flags
&
1779 reopen_state
->bs
->read_only
= !(reopen_state
->flags
& BDRV_O_RDWR
);
1781 bdrv_refresh_limits(reopen_state
->bs
);
1785 * Abort the reopen, and delete and free the staged changes in
1788 void bdrv_reopen_abort(BDRVReopenState
*reopen_state
)
1792 assert(reopen_state
!= NULL
);
1793 drv
= reopen_state
->bs
->drv
;
1794 assert(drv
!= NULL
);
1796 if (drv
->bdrv_reopen_abort
) {
1797 drv
->bdrv_reopen_abort(reopen_state
);
1802 void bdrv_close(BlockDriverState
*bs
)
1805 block_job_cancel_sync(bs
->job
);
1807 bdrv_drain_all(); /* complete I/O */
1809 bdrv_drain_all(); /* in case flush left pending I/O */
1810 notifier_list_notify(&bs
->close_notifiers
, bs
);
1813 if (bs
->backing_hd
) {
1814 BlockDriverState
*backing_hd
= bs
->backing_hd
;
1815 bdrv_set_backing_hd(bs
, NULL
);
1816 bdrv_unref(backing_hd
);
1818 bs
->drv
->bdrv_close(bs
);
1822 bs
->copy_on_read
= 0;
1823 bs
->backing_file
[0] = '\0';
1824 bs
->backing_format
[0] = '\0';
1825 bs
->total_sectors
= 0;
1830 bs
->zero_beyond_eof
= false;
1831 QDECREF(bs
->options
);
1834 if (bs
->file
!= NULL
) {
1835 bdrv_unref(bs
->file
);
1840 bdrv_dev_change_media_cb(bs
, false);
1842 /*throttling disk I/O limits*/
1843 if (bs
->io_limits_enabled
) {
1844 bdrv_io_limits_disable(bs
);
1848 void bdrv_close_all(void)
1850 BlockDriverState
*bs
;
1852 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
1853 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
1855 aio_context_acquire(aio_context
);
1857 aio_context_release(aio_context
);
1861 /* Check if any requests are in-flight (including throttled requests) */
1862 static bool bdrv_requests_pending(BlockDriverState
*bs
)
1864 if (!QLIST_EMPTY(&bs
->tracked_requests
)) {
1867 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[0])) {
1870 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[1])) {
1873 if (bs
->file
&& bdrv_requests_pending(bs
->file
)) {
1876 if (bs
->backing_hd
&& bdrv_requests_pending(bs
->backing_hd
)) {
1883 * Wait for pending requests to complete across all BlockDriverStates
1885 * This function does not flush data to disk, use bdrv_flush_all() for that
1886 * after calling this function.
1888 * Note that completion of an asynchronous I/O operation can trigger any
1889 * number of other I/O operations on other devices---for example a coroutine
1890 * can be arbitrarily complex and a constant flow of I/O can come until the
1891 * coroutine is complete. Because of this, it is not possible to have a
1892 * function to drain a single device's I/O queue.
1894 void bdrv_drain_all(void)
1896 /* Always run first iteration so any pending completion BHs run */
1898 BlockDriverState
*bs
;
1903 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
1904 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
1907 aio_context_acquire(aio_context
);
1908 bdrv_start_throttled_reqs(bs
);
1909 bs_busy
= bdrv_requests_pending(bs
);
1910 bs_busy
|= aio_poll(aio_context
, bs_busy
);
1911 aio_context_release(aio_context
);
1918 /* make a BlockDriverState anonymous by removing from bdrv_state and
1919 * graph_bdrv_state list.
1920 Also, NULL terminate the device_name to prevent double remove */
1921 void bdrv_make_anon(BlockDriverState
*bs
)
1923 if (bs
->device_name
[0] != '\0') {
1924 QTAILQ_REMOVE(&bdrv_states
, bs
, device_list
);
1926 bs
->device_name
[0] = '\0';
1927 if (bs
->node_name
[0] != '\0') {
1928 QTAILQ_REMOVE(&graph_bdrv_states
, bs
, node_list
);
1930 bs
->node_name
[0] = '\0';
1933 static void bdrv_rebind(BlockDriverState
*bs
)
1935 if (bs
->drv
&& bs
->drv
->bdrv_rebind
) {
1936 bs
->drv
->bdrv_rebind(bs
);
1940 static void bdrv_move_feature_fields(BlockDriverState
*bs_dest
,
1941 BlockDriverState
*bs_src
)
1943 /* move some fields that need to stay attached to the device */
1946 bs_dest
->dev_ops
= bs_src
->dev_ops
;
1947 bs_dest
->dev_opaque
= bs_src
->dev_opaque
;
1948 bs_dest
->dev
= bs_src
->dev
;
1949 bs_dest
->guest_block_size
= bs_src
->guest_block_size
;
1950 bs_dest
->copy_on_read
= bs_src
->copy_on_read
;
1952 bs_dest
->enable_write_cache
= bs_src
->enable_write_cache
;
1954 /* i/o throttled req */
1955 memcpy(&bs_dest
->throttle_state
,
1956 &bs_src
->throttle_state
,
1957 sizeof(ThrottleState
));
1958 bs_dest
->throttled_reqs
[0] = bs_src
->throttled_reqs
[0];
1959 bs_dest
->throttled_reqs
[1] = bs_src
->throttled_reqs
[1];
1960 bs_dest
->io_limits_enabled
= bs_src
->io_limits_enabled
;
1963 bs_dest
->on_read_error
= bs_src
->on_read_error
;
1964 bs_dest
->on_write_error
= bs_src
->on_write_error
;
1967 bs_dest
->iostatus_enabled
= bs_src
->iostatus_enabled
;
1968 bs_dest
->iostatus
= bs_src
->iostatus
;
1971 bs_dest
->dirty_bitmaps
= bs_src
->dirty_bitmaps
;
1973 /* reference count */
1974 bs_dest
->refcnt
= bs_src
->refcnt
;
1977 bs_dest
->job
= bs_src
->job
;
1979 /* keep the same entry in bdrv_states */
1980 pstrcpy(bs_dest
->device_name
, sizeof(bs_dest
->device_name
),
1981 bs_src
->device_name
);
1982 bs_dest
->device_list
= bs_src
->device_list
;
1983 memcpy(bs_dest
->op_blockers
, bs_src
->op_blockers
,
1984 sizeof(bs_dest
->op_blockers
));
1988 * Swap bs contents for two image chains while they are live,
1989 * while keeping required fields on the BlockDriverState that is
1990 * actually attached to a device.
1992 * This will modify the BlockDriverState fields, and swap contents
1993 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1995 * bs_new is required to be anonymous.
1997 * This function does not create any image files.
1999 void bdrv_swap(BlockDriverState
*bs_new
, BlockDriverState
*bs_old
)
2001 BlockDriverState tmp
;
2003 /* The code needs to swap the node_name but simply swapping node_list won't
2004 * work so first remove the nodes from the graph list, do the swap then
2005 * insert them back if needed.
2007 if (bs_new
->node_name
[0] != '\0') {
2008 QTAILQ_REMOVE(&graph_bdrv_states
, bs_new
, node_list
);
2010 if (bs_old
->node_name
[0] != '\0') {
2011 QTAILQ_REMOVE(&graph_bdrv_states
, bs_old
, node_list
);
2014 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
2015 assert(bs_new
->device_name
[0] == '\0');
2016 assert(QLIST_EMPTY(&bs_new
->dirty_bitmaps
));
2017 assert(bs_new
->job
== NULL
);
2018 assert(bs_new
->dev
== NULL
);
2019 assert(bs_new
->io_limits_enabled
== false);
2020 assert(!throttle_have_timer(&bs_new
->throttle_state
));
2026 /* there are some fields that should not be swapped, move them back */
2027 bdrv_move_feature_fields(&tmp
, bs_old
);
2028 bdrv_move_feature_fields(bs_old
, bs_new
);
2029 bdrv_move_feature_fields(bs_new
, &tmp
);
2031 /* bs_new shouldn't be in bdrv_states even after the swap! */
2032 assert(bs_new
->device_name
[0] == '\0');
2034 /* Check a few fields that should remain attached to the device */
2035 assert(bs_new
->dev
== NULL
);
2036 assert(bs_new
->job
== NULL
);
2037 assert(bs_new
->io_limits_enabled
== false);
2038 assert(!throttle_have_timer(&bs_new
->throttle_state
));
2040 /* insert the nodes back into the graph node list if needed */
2041 if (bs_new
->node_name
[0] != '\0') {
2042 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs_new
, node_list
);
2044 if (bs_old
->node_name
[0] != '\0') {
2045 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs_old
, node_list
);
2048 bdrv_rebind(bs_new
);
2049 bdrv_rebind(bs_old
);
2053 * Add new bs contents at the top of an image chain while the chain is
2054 * live, while keeping required fields on the top layer.
2056 * This will modify the BlockDriverState fields, and swap contents
2057 * between bs_new and bs_top. Both bs_new and bs_top are modified.
2059 * bs_new is required to be anonymous.
2061 * This function does not create any image files.
2063 void bdrv_append(BlockDriverState
*bs_new
, BlockDriverState
*bs_top
)
2065 bdrv_swap(bs_new
, bs_top
);
2067 /* The contents of 'tmp' will become bs_top, as we are
2068 * swapping bs_new and bs_top contents. */
2069 bdrv_set_backing_hd(bs_top
, bs_new
);
2072 static void bdrv_delete(BlockDriverState
*bs
)
2076 assert(bdrv_op_blocker_is_empty(bs
));
2077 assert(!bs
->refcnt
);
2078 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
2082 /* remove from list, if necessary */
2088 int bdrv_attach_dev(BlockDriverState
*bs
, void *dev
)
2089 /* TODO change to DeviceState *dev when all users are qdevified */
2095 bdrv_iostatus_reset(bs
);
2099 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2100 void bdrv_attach_dev_nofail(BlockDriverState
*bs
, void *dev
)
2102 if (bdrv_attach_dev(bs
, dev
) < 0) {
2107 void bdrv_detach_dev(BlockDriverState
*bs
, void *dev
)
2108 /* TODO change to DeviceState *dev when all users are qdevified */
2110 assert(bs
->dev
== dev
);
2113 bs
->dev_opaque
= NULL
;
2114 bs
->guest_block_size
= 512;
2117 /* TODO change to return DeviceState * when all users are qdevified */
2118 void *bdrv_get_attached_dev(BlockDriverState
*bs
)
2123 void bdrv_set_dev_ops(BlockDriverState
*bs
, const BlockDevOps
*ops
,
2127 bs
->dev_opaque
= opaque
;
2130 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
)
2132 if (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
) {
2133 bool tray_was_closed
= !bdrv_dev_is_tray_open(bs
);
2134 bs
->dev_ops
->change_media_cb(bs
->dev_opaque
, load
);
2135 if (tray_was_closed
) {
2137 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs
),
2138 true, &error_abort
);
2142 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs
),
2143 false, &error_abort
);
2148 bool bdrv_dev_has_removable_media(BlockDriverState
*bs
)
2150 return !bs
->dev
|| (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
);
2153 void bdrv_dev_eject_request(BlockDriverState
*bs
, bool force
)
2155 if (bs
->dev_ops
&& bs
->dev_ops
->eject_request_cb
) {
2156 bs
->dev_ops
->eject_request_cb(bs
->dev_opaque
, force
);
2160 bool bdrv_dev_is_tray_open(BlockDriverState
*bs
)
2162 if (bs
->dev_ops
&& bs
->dev_ops
->is_tray_open
) {
2163 return bs
->dev_ops
->is_tray_open(bs
->dev_opaque
);
2168 static void bdrv_dev_resize_cb(BlockDriverState
*bs
)
2170 if (bs
->dev_ops
&& bs
->dev_ops
->resize_cb
) {
2171 bs
->dev_ops
->resize_cb(bs
->dev_opaque
);
2175 bool bdrv_dev_is_medium_locked(BlockDriverState
*bs
)
2177 if (bs
->dev_ops
&& bs
->dev_ops
->is_medium_locked
) {
2178 return bs
->dev_ops
->is_medium_locked(bs
->dev_opaque
);
2184 * Run consistency checks on an image
2186 * Returns 0 if the check could be completed (it doesn't mean that the image is
2187 * free of errors) or -errno when an internal error occurred. The results of the
2188 * check are stored in res.
2190 int bdrv_check(BlockDriverState
*bs
, BdrvCheckResult
*res
, BdrvCheckMode fix
)
2192 if (bs
->drv
->bdrv_check
== NULL
) {
2196 memset(res
, 0, sizeof(*res
));
2197 return bs
->drv
->bdrv_check(bs
, res
, fix
);
2200 #define COMMIT_BUF_SECTORS 2048
2202 /* commit COW file into the raw image */
2203 int bdrv_commit(BlockDriverState
*bs
)
2205 BlockDriver
*drv
= bs
->drv
;
2206 int64_t sector
, total_sectors
, length
, backing_length
;
2207 int n
, ro
, open_flags
;
2209 uint8_t *buf
= NULL
;
2210 char filename
[PATH_MAX
];
2215 if (!bs
->backing_hd
) {
2219 if (bdrv_op_is_blocked(bs
, BLOCK_OP_TYPE_COMMIT
, NULL
) ||
2220 bdrv_op_is_blocked(bs
->backing_hd
, BLOCK_OP_TYPE_COMMIT
, NULL
)) {
2224 ro
= bs
->backing_hd
->read_only
;
2225 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2226 pstrcpy(filename
, sizeof(filename
), bs
->backing_hd
->filename
);
2227 open_flags
= bs
->backing_hd
->open_flags
;
2230 if (bdrv_reopen(bs
->backing_hd
, open_flags
| BDRV_O_RDWR
, NULL
)) {
2235 length
= bdrv_getlength(bs
);
2241 backing_length
= bdrv_getlength(bs
->backing_hd
);
2242 if (backing_length
< 0) {
2243 ret
= backing_length
;
2247 /* If our top snapshot is larger than the backing file image,
2248 * grow the backing file image if possible. If not possible,
2249 * we must return an error */
2250 if (length
> backing_length
) {
2251 ret
= bdrv_truncate(bs
->backing_hd
, length
);
2257 total_sectors
= length
>> BDRV_SECTOR_BITS
;
2258 buf
= g_malloc(COMMIT_BUF_SECTORS
* BDRV_SECTOR_SIZE
);
2260 for (sector
= 0; sector
< total_sectors
; sector
+= n
) {
2261 ret
= bdrv_is_allocated(bs
, sector
, COMMIT_BUF_SECTORS
, &n
);
2266 ret
= bdrv_read(bs
, sector
, buf
, n
);
2271 ret
= bdrv_write(bs
->backing_hd
, sector
, buf
, n
);
2278 if (drv
->bdrv_make_empty
) {
2279 ret
= drv
->bdrv_make_empty(bs
);
2287 * Make sure all data we wrote to the backing device is actually
2290 if (bs
->backing_hd
) {
2291 bdrv_flush(bs
->backing_hd
);
2299 /* ignoring error return here */
2300 bdrv_reopen(bs
->backing_hd
, open_flags
& ~BDRV_O_RDWR
, NULL
);
2306 int bdrv_commit_all(void)
2308 BlockDriverState
*bs
;
2310 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
2311 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
2313 aio_context_acquire(aio_context
);
2314 if (bs
->drv
&& bs
->backing_hd
) {
2315 int ret
= bdrv_commit(bs
);
2317 aio_context_release(aio_context
);
2321 aio_context_release(aio_context
);
2327 * Remove an active request from the tracked requests list
2329 * This function should be called when a tracked request is completing.
2331 static void tracked_request_end(BdrvTrackedRequest
*req
)
2333 if (req
->serialising
) {
2334 req
->bs
->serialising_in_flight
--;
2337 QLIST_REMOVE(req
, list
);
2338 qemu_co_queue_restart_all(&req
->wait_queue
);
2342 * Add an active request to the tracked requests list
2344 static void tracked_request_begin(BdrvTrackedRequest
*req
,
2345 BlockDriverState
*bs
,
2347 unsigned int bytes
, bool is_write
)
2349 *req
= (BdrvTrackedRequest
){
2353 .is_write
= is_write
,
2354 .co
= qemu_coroutine_self(),
2355 .serialising
= false,
2356 .overlap_offset
= offset
,
2357 .overlap_bytes
= bytes
,
2360 qemu_co_queue_init(&req
->wait_queue
);
2362 QLIST_INSERT_HEAD(&bs
->tracked_requests
, req
, list
);
2365 static void mark_request_serialising(BdrvTrackedRequest
*req
, uint64_t align
)
2367 int64_t overlap_offset
= req
->offset
& ~(align
- 1);
2368 unsigned int overlap_bytes
= ROUND_UP(req
->offset
+ req
->bytes
, align
)
2371 if (!req
->serialising
) {
2372 req
->bs
->serialising_in_flight
++;
2373 req
->serialising
= true;
2376 req
->overlap_offset
= MIN(req
->overlap_offset
, overlap_offset
);
2377 req
->overlap_bytes
= MAX(req
->overlap_bytes
, overlap_bytes
);
2381 * Round a region to cluster boundaries
2383 void bdrv_round_to_clusters(BlockDriverState
*bs
,
2384 int64_t sector_num
, int nb_sectors
,
2385 int64_t *cluster_sector_num
,
2386 int *cluster_nb_sectors
)
2388 BlockDriverInfo bdi
;
2390 if (bdrv_get_info(bs
, &bdi
) < 0 || bdi
.cluster_size
== 0) {
2391 *cluster_sector_num
= sector_num
;
2392 *cluster_nb_sectors
= nb_sectors
;
2394 int64_t c
= bdi
.cluster_size
/ BDRV_SECTOR_SIZE
;
2395 *cluster_sector_num
= QEMU_ALIGN_DOWN(sector_num
, c
);
2396 *cluster_nb_sectors
= QEMU_ALIGN_UP(sector_num
- *cluster_sector_num
+
2401 static int bdrv_get_cluster_size(BlockDriverState
*bs
)
2403 BlockDriverInfo bdi
;
2406 ret
= bdrv_get_info(bs
, &bdi
);
2407 if (ret
< 0 || bdi
.cluster_size
== 0) {
2408 return bs
->request_alignment
;
2410 return bdi
.cluster_size
;
2414 static bool tracked_request_overlaps(BdrvTrackedRequest
*req
,
2415 int64_t offset
, unsigned int bytes
)
2418 if (offset
>= req
->overlap_offset
+ req
->overlap_bytes
) {
2422 if (req
->overlap_offset
>= offset
+ bytes
) {
2428 static bool coroutine_fn
wait_serialising_requests(BdrvTrackedRequest
*self
)
2430 BlockDriverState
*bs
= self
->bs
;
2431 BdrvTrackedRequest
*req
;
2433 bool waited
= false;
2435 if (!bs
->serialising_in_flight
) {
2441 QLIST_FOREACH(req
, &bs
->tracked_requests
, list
) {
2442 if (req
== self
|| (!req
->serialising
&& !self
->serialising
)) {
2445 if (tracked_request_overlaps(req
, self
->overlap_offset
,
2446 self
->overlap_bytes
))
2448 /* Hitting this means there was a reentrant request, for
2449 * example, a block driver issuing nested requests. This must
2450 * never happen since it means deadlock.
2452 assert(qemu_coroutine_self() != req
->co
);
2454 /* If the request is already (indirectly) waiting for us, or
2455 * will wait for us as soon as it wakes up, then just go on
2456 * (instead of producing a deadlock in the former case). */
2457 if (!req
->waiting_for
) {
2458 self
->waiting_for
= req
;
2459 qemu_co_queue_wait(&req
->wait_queue
);
2460 self
->waiting_for
= NULL
;
2475 * -EINVAL - backing format specified, but no file
2476 * -ENOSPC - can't update the backing file because no space is left in the
2478 * -ENOTSUP - format driver doesn't support changing the backing file
2480 int bdrv_change_backing_file(BlockDriverState
*bs
,
2481 const char *backing_file
, const char *backing_fmt
)
2483 BlockDriver
*drv
= bs
->drv
;
2486 /* Backing file format doesn't make sense without a backing file */
2487 if (backing_fmt
&& !backing_file
) {
2491 if (drv
->bdrv_change_backing_file
!= NULL
) {
2492 ret
= drv
->bdrv_change_backing_file(bs
, backing_file
, backing_fmt
);
2498 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_file
?: "");
2499 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
), backing_fmt
?: "");
2505 * Finds the image layer in the chain that has 'bs' as its backing file.
2507 * active is the current topmost image.
2509 * Returns NULL if bs is not found in active's image chain,
2510 * or if active == bs.
2512 BlockDriverState
*bdrv_find_overlay(BlockDriverState
*active
,
2513 BlockDriverState
*bs
)
2515 BlockDriverState
*overlay
= NULL
;
2516 BlockDriverState
*intermediate
;
2518 assert(active
!= NULL
);
2521 /* if bs is the same as active, then by definition it has no overlay
2527 intermediate
= active
;
2528 while (intermediate
->backing_hd
) {
2529 if (intermediate
->backing_hd
== bs
) {
2530 overlay
= intermediate
;
2533 intermediate
= intermediate
->backing_hd
;
2539 typedef struct BlkIntermediateStates
{
2540 BlockDriverState
*bs
;
2541 QSIMPLEQ_ENTRY(BlkIntermediateStates
) entry
;
2542 } BlkIntermediateStates
;
2546 * Drops images above 'base' up to and including 'top', and sets the image
2547 * above 'top' to have base as its backing file.
2549 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2550 * information in 'bs' can be properly updated.
2552 * E.g., this will convert the following chain:
2553 * bottom <- base <- intermediate <- top <- active
2557 * bottom <- base <- active
2559 * It is allowed for bottom==base, in which case it converts:
2561 * base <- intermediate <- top <- active
2568 * if active == top, that is considered an error
2571 int bdrv_drop_intermediate(BlockDriverState
*active
, BlockDriverState
*top
,
2572 BlockDriverState
*base
)
2574 BlockDriverState
*intermediate
;
2575 BlockDriverState
*base_bs
= NULL
;
2576 BlockDriverState
*new_top_bs
= NULL
;
2577 BlkIntermediateStates
*intermediate_state
, *next
;
2580 QSIMPLEQ_HEAD(states_to_delete
, BlkIntermediateStates
) states_to_delete
;
2581 QSIMPLEQ_INIT(&states_to_delete
);
2583 if (!top
->drv
|| !base
->drv
) {
2587 new_top_bs
= bdrv_find_overlay(active
, top
);
2589 if (new_top_bs
== NULL
) {
2590 /* we could not find the image above 'top', this is an error */
2594 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2595 * to do, no intermediate images */
2596 if (new_top_bs
->backing_hd
== base
) {
2603 /* now we will go down through the list, and add each BDS we find
2604 * into our deletion queue, until we hit the 'base'
2606 while (intermediate
) {
2607 intermediate_state
= g_malloc0(sizeof(BlkIntermediateStates
));
2608 intermediate_state
->bs
= intermediate
;
2609 QSIMPLEQ_INSERT_TAIL(&states_to_delete
, intermediate_state
, entry
);
2611 if (intermediate
->backing_hd
== base
) {
2612 base_bs
= intermediate
->backing_hd
;
2615 intermediate
= intermediate
->backing_hd
;
2617 if (base_bs
== NULL
) {
2618 /* something went wrong, we did not end at the base. safely
2619 * unravel everything, and exit with error */
2623 /* success - we can delete the intermediate states, and link top->base */
2624 ret
= bdrv_change_backing_file(new_top_bs
, base_bs
->filename
,
2625 base_bs
->drv
? base_bs
->drv
->format_name
: "");
2629 bdrv_set_backing_hd(new_top_bs
, base_bs
);
2631 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2632 /* so that bdrv_close() does not recursively close the chain */
2633 bdrv_set_backing_hd(intermediate_state
->bs
, NULL
);
2634 bdrv_unref(intermediate_state
->bs
);
2639 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2640 g_free(intermediate_state
);
2646 static int bdrv_check_byte_request(BlockDriverState
*bs
, int64_t offset
,
2651 if (size
> INT_MAX
) {
2655 if (!bdrv_is_inserted(bs
))
2661 len
= bdrv_getlength(bs
);
2666 if ((offset
> len
) || (len
- offset
< size
))
2672 static int bdrv_check_request(BlockDriverState
*bs
, int64_t sector_num
,
2675 if (nb_sectors
< 0 || nb_sectors
> INT_MAX
/ BDRV_SECTOR_SIZE
) {
2679 return bdrv_check_byte_request(bs
, sector_num
* BDRV_SECTOR_SIZE
,
2680 nb_sectors
* BDRV_SECTOR_SIZE
);
2683 typedef struct RwCo
{
2684 BlockDriverState
*bs
;
2689 BdrvRequestFlags flags
;
2692 static void coroutine_fn
bdrv_rw_co_entry(void *opaque
)
2694 RwCo
*rwco
= opaque
;
2696 if (!rwco
->is_write
) {
2697 rwco
->ret
= bdrv_co_do_preadv(rwco
->bs
, rwco
->offset
,
2698 rwco
->qiov
->size
, rwco
->qiov
,
2701 rwco
->ret
= bdrv_co_do_pwritev(rwco
->bs
, rwco
->offset
,
2702 rwco
->qiov
->size
, rwco
->qiov
,
2708 * Process a vectored synchronous request using coroutines
2710 static int bdrv_prwv_co(BlockDriverState
*bs
, int64_t offset
,
2711 QEMUIOVector
*qiov
, bool is_write
,
2712 BdrvRequestFlags flags
)
2719 .is_write
= is_write
,
2725 * In sync call context, when the vcpu is blocked, this throttling timer
2726 * will not fire; so the I/O throttling function has to be disabled here
2727 * if it has been enabled.
2729 if (bs
->io_limits_enabled
) {
2730 fprintf(stderr
, "Disabling I/O throttling on '%s' due "
2731 "to synchronous I/O.\n", bdrv_get_device_name(bs
));
2732 bdrv_io_limits_disable(bs
);
2735 if (qemu_in_coroutine()) {
2736 /* Fast-path if already in coroutine context */
2737 bdrv_rw_co_entry(&rwco
);
2739 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
2741 co
= qemu_coroutine_create(bdrv_rw_co_entry
);
2742 qemu_coroutine_enter(co
, &rwco
);
2743 while (rwco
.ret
== NOT_DONE
) {
2744 aio_poll(aio_context
, true);
2751 * Process a synchronous request using coroutines
2753 static int bdrv_rw_co(BlockDriverState
*bs
, int64_t sector_num
, uint8_t *buf
,
2754 int nb_sectors
, bool is_write
, BdrvRequestFlags flags
)
2757 struct iovec iov
= {
2758 .iov_base
= (void *)buf
,
2759 .iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
,
2762 if (nb_sectors
< 0 || nb_sectors
> INT_MAX
/ BDRV_SECTOR_SIZE
) {
2766 qemu_iovec_init_external(&qiov
, &iov
, 1);
2767 return bdrv_prwv_co(bs
, sector_num
<< BDRV_SECTOR_BITS
,
2768 &qiov
, is_write
, flags
);
2771 /* return < 0 if error. See bdrv_write() for the return codes */
2772 int bdrv_read(BlockDriverState
*bs
, int64_t sector_num
,
2773 uint8_t *buf
, int nb_sectors
)
2775 return bdrv_rw_co(bs
, sector_num
, buf
, nb_sectors
, false, 0);
2778 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2779 int bdrv_read_unthrottled(BlockDriverState
*bs
, int64_t sector_num
,
2780 uint8_t *buf
, int nb_sectors
)
2785 enabled
= bs
->io_limits_enabled
;
2786 bs
->io_limits_enabled
= false;
2787 ret
= bdrv_read(bs
, sector_num
, buf
, nb_sectors
);
2788 bs
->io_limits_enabled
= enabled
;
2792 /* Return < 0 if error. Important errors are:
2793 -EIO generic I/O error (may happen for all errors)
2794 -ENOMEDIUM No media inserted.
2795 -EINVAL Invalid sector number or nb_sectors
2796 -EACCES Trying to write a read-only device
2798 int bdrv_write(BlockDriverState
*bs
, int64_t sector_num
,
2799 const uint8_t *buf
, int nb_sectors
)
2801 return bdrv_rw_co(bs
, sector_num
, (uint8_t *)buf
, nb_sectors
, true, 0);
2804 int bdrv_write_zeroes(BlockDriverState
*bs
, int64_t sector_num
,
2805 int nb_sectors
, BdrvRequestFlags flags
)
2807 return bdrv_rw_co(bs
, sector_num
, NULL
, nb_sectors
, true,
2808 BDRV_REQ_ZERO_WRITE
| flags
);
2812 * Completely zero out a block device with the help of bdrv_write_zeroes.
2813 * The operation is sped up by checking the block status and only writing
2814 * zeroes to the device if they currently do not return zeroes. Optional
2815 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2817 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2819 int bdrv_make_zero(BlockDriverState
*bs
, BdrvRequestFlags flags
)
2821 int64_t target_size
;
2822 int64_t ret
, nb_sectors
, sector_num
= 0;
2825 target_size
= bdrv_getlength(bs
);
2826 if (target_size
< 0) {
2829 target_size
/= BDRV_SECTOR_SIZE
;
2832 nb_sectors
= target_size
- sector_num
;
2833 if (nb_sectors
<= 0) {
2836 if (nb_sectors
> INT_MAX
) {
2837 nb_sectors
= INT_MAX
;
2839 ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, &n
);
2841 error_report("error getting block status at sector %" PRId64
": %s",
2842 sector_num
, strerror(-ret
));
2845 if (ret
& BDRV_BLOCK_ZERO
) {
2849 ret
= bdrv_write_zeroes(bs
, sector_num
, n
, flags
);
2851 error_report("error writing zeroes at sector %" PRId64
": %s",
2852 sector_num
, strerror(-ret
));
2859 int bdrv_pread(BlockDriverState
*bs
, int64_t offset
, void *buf
, int bytes
)
2862 struct iovec iov
= {
2863 .iov_base
= (void *)buf
,
2872 qemu_iovec_init_external(&qiov
, &iov
, 1);
2873 ret
= bdrv_prwv_co(bs
, offset
, &qiov
, false, 0);
2881 int bdrv_pwritev(BlockDriverState
*bs
, int64_t offset
, QEMUIOVector
*qiov
)
2885 ret
= bdrv_prwv_co(bs
, offset
, qiov
, true, 0);
2893 int bdrv_pwrite(BlockDriverState
*bs
, int64_t offset
,
2894 const void *buf
, int bytes
)
2897 struct iovec iov
= {
2898 .iov_base
= (void *) buf
,
2906 qemu_iovec_init_external(&qiov
, &iov
, 1);
2907 return bdrv_pwritev(bs
, offset
, &qiov
);
2911 * Writes to the file and ensures that no writes are reordered across this
2912 * request (acts as a barrier)
2914 * Returns 0 on success, -errno in error cases.
2916 int bdrv_pwrite_sync(BlockDriverState
*bs
, int64_t offset
,
2917 const void *buf
, int count
)
2921 ret
= bdrv_pwrite(bs
, offset
, buf
, count
);
2926 /* No flush needed for cache modes that already do it */
2927 if (bs
->enable_write_cache
) {
2934 static int coroutine_fn
bdrv_co_do_copy_on_readv(BlockDriverState
*bs
,
2935 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2937 /* Perform I/O through a temporary buffer so that users who scribble over
2938 * their read buffer while the operation is in progress do not end up
2939 * modifying the image file. This is critical for zero-copy guest I/O
2940 * where anything might happen inside guest memory.
2942 void *bounce_buffer
;
2944 BlockDriver
*drv
= bs
->drv
;
2946 QEMUIOVector bounce_qiov
;
2947 int64_t cluster_sector_num
;
2948 int cluster_nb_sectors
;
2952 /* Cover entire cluster so no additional backing file I/O is required when
2953 * allocating cluster in the image file.
2955 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
2956 &cluster_sector_num
, &cluster_nb_sectors
);
2958 trace_bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
,
2959 cluster_sector_num
, cluster_nb_sectors
);
2961 iov
.iov_len
= cluster_nb_sectors
* BDRV_SECTOR_SIZE
;
2962 iov
.iov_base
= bounce_buffer
= qemu_blockalign(bs
, iov
.iov_len
);
2963 qemu_iovec_init_external(&bounce_qiov
, &iov
, 1);
2965 ret
= drv
->bdrv_co_readv(bs
, cluster_sector_num
, cluster_nb_sectors
,
2971 if (drv
->bdrv_co_write_zeroes
&&
2972 buffer_is_zero(bounce_buffer
, iov
.iov_len
)) {
2973 ret
= bdrv_co_do_write_zeroes(bs
, cluster_sector_num
,
2974 cluster_nb_sectors
, 0);
2976 /* This does not change the data on the disk, it is not necessary
2977 * to flush even in cache=writethrough mode.
2979 ret
= drv
->bdrv_co_writev(bs
, cluster_sector_num
, cluster_nb_sectors
,
2984 /* It might be okay to ignore write errors for guest requests. If this
2985 * is a deliberate copy-on-read then we don't want to ignore the error.
2986 * Simply report it in all cases.
2991 skip_bytes
= (sector_num
- cluster_sector_num
) * BDRV_SECTOR_SIZE
;
2992 qemu_iovec_from_buf(qiov
, 0, bounce_buffer
+ skip_bytes
,
2993 nb_sectors
* BDRV_SECTOR_SIZE
);
2996 qemu_vfree(bounce_buffer
);
3001 * Forwards an already correctly aligned request to the BlockDriver. This
3002 * handles copy on read and zeroing after EOF; any other features must be
3003 * implemented by the caller.
3005 static int coroutine_fn
bdrv_aligned_preadv(BlockDriverState
*bs
,
3006 BdrvTrackedRequest
*req
, int64_t offset
, unsigned int bytes
,
3007 int64_t align
, QEMUIOVector
*qiov
, int flags
)
3009 BlockDriver
*drv
= bs
->drv
;
3012 int64_t sector_num
= offset
>> BDRV_SECTOR_BITS
;
3013 unsigned int nb_sectors
= bytes
>> BDRV_SECTOR_BITS
;
3015 assert((offset
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3016 assert((bytes
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3018 /* Handle Copy on Read and associated serialisation */
3019 if (flags
& BDRV_REQ_COPY_ON_READ
) {
3020 /* If we touch the same cluster it counts as an overlap. This
3021 * guarantees that allocating writes will be serialized and not race
3022 * with each other for the same cluster. For example, in copy-on-read
3023 * it ensures that the CoR read and write operations are atomic and
3024 * guest writes cannot interleave between them. */
3025 mark_request_serialising(req
, bdrv_get_cluster_size(bs
));
3028 wait_serialising_requests(req
);
3030 if (flags
& BDRV_REQ_COPY_ON_READ
) {
3033 ret
= bdrv_is_allocated(bs
, sector_num
, nb_sectors
, &pnum
);
3038 if (!ret
|| pnum
!= nb_sectors
) {
3039 ret
= bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
, qiov
);
3044 /* Forward the request to the BlockDriver */
3045 if (!(bs
->zero_beyond_eof
&& bs
->growable
)) {
3046 ret
= drv
->bdrv_co_readv(bs
, sector_num
, nb_sectors
, qiov
);
3048 /* Read zeros after EOF of growable BDSes */
3049 int64_t len
, total_sectors
, max_nb_sectors
;
3051 len
= bdrv_getlength(bs
);
3057 total_sectors
= DIV_ROUND_UP(len
, BDRV_SECTOR_SIZE
);
3058 max_nb_sectors
= ROUND_UP(MAX(0, total_sectors
- sector_num
),
3059 align
>> BDRV_SECTOR_BITS
);
3060 if (max_nb_sectors
> 0) {
3061 ret
= drv
->bdrv_co_readv(bs
, sector_num
,
3062 MIN(nb_sectors
, max_nb_sectors
), qiov
);
3067 /* Reading beyond end of file is supposed to produce zeroes */
3068 if (ret
== 0 && total_sectors
< sector_num
+ nb_sectors
) {
3069 uint64_t offset
= MAX(0, total_sectors
- sector_num
);
3070 uint64_t bytes
= (sector_num
+ nb_sectors
- offset
) *
3072 qemu_iovec_memset(qiov
, offset
* BDRV_SECTOR_SIZE
, 0, bytes
);
3081 * Handle a read request in coroutine context
3083 static int coroutine_fn
bdrv_co_do_preadv(BlockDriverState
*bs
,
3084 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
3085 BdrvRequestFlags flags
)
3087 BlockDriver
*drv
= bs
->drv
;
3088 BdrvTrackedRequest req
;
3090 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3091 uint64_t align
= MAX(BDRV_SECTOR_SIZE
, bs
->request_alignment
);
3092 uint8_t *head_buf
= NULL
;
3093 uint8_t *tail_buf
= NULL
;
3094 QEMUIOVector local_qiov
;
3095 bool use_local_qiov
= false;
3101 if (bdrv_check_byte_request(bs
, offset
, bytes
)) {
3105 if (bs
->copy_on_read
) {
3106 flags
|= BDRV_REQ_COPY_ON_READ
;
3109 /* throttling disk I/O */
3110 if (bs
->io_limits_enabled
) {
3111 bdrv_io_limits_intercept(bs
, bytes
, false);
3114 /* Align read if necessary by padding qiov */
3115 if (offset
& (align
- 1)) {
3116 head_buf
= qemu_blockalign(bs
, align
);
3117 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 2);
3118 qemu_iovec_add(&local_qiov
, head_buf
, offset
& (align
- 1));
3119 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3120 use_local_qiov
= true;
3122 bytes
+= offset
& (align
- 1);
3123 offset
= offset
& ~(align
- 1);
3126 if ((offset
+ bytes
) & (align
- 1)) {
3127 if (!use_local_qiov
) {
3128 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 1);
3129 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3130 use_local_qiov
= true;
3132 tail_buf
= qemu_blockalign(bs
, align
);
3133 qemu_iovec_add(&local_qiov
, tail_buf
,
3134 align
- ((offset
+ bytes
) & (align
- 1)));
3136 bytes
= ROUND_UP(bytes
, align
);
3139 tracked_request_begin(&req
, bs
, offset
, bytes
, false);
3140 ret
= bdrv_aligned_preadv(bs
, &req
, offset
, bytes
, align
,
3141 use_local_qiov
? &local_qiov
: qiov
,
3143 tracked_request_end(&req
);
3145 if (use_local_qiov
) {
3146 qemu_iovec_destroy(&local_qiov
);
3147 qemu_vfree(head_buf
);
3148 qemu_vfree(tail_buf
);
3154 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
3155 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
3156 BdrvRequestFlags flags
)
3158 if (nb_sectors
< 0 || nb_sectors
> (UINT_MAX
>> BDRV_SECTOR_BITS
)) {
3162 return bdrv_co_do_preadv(bs
, sector_num
<< BDRV_SECTOR_BITS
,
3163 nb_sectors
<< BDRV_SECTOR_BITS
, qiov
, flags
);
3166 int coroutine_fn
bdrv_co_readv(BlockDriverState
*bs
, int64_t sector_num
,
3167 int nb_sectors
, QEMUIOVector
*qiov
)
3169 trace_bdrv_co_readv(bs
, sector_num
, nb_sectors
);
3171 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
, 0);
3174 int coroutine_fn
bdrv_co_copy_on_readv(BlockDriverState
*bs
,
3175 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
3177 trace_bdrv_co_copy_on_readv(bs
, sector_num
, nb_sectors
);
3179 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
,
3180 BDRV_REQ_COPY_ON_READ
);
3183 /* if no limit is specified in the BlockLimits use a default
3184 * of 32768 512-byte sectors (16 MiB) per request.
3186 #define MAX_WRITE_ZEROES_DEFAULT 32768
3188 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
3189 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
)
3191 BlockDriver
*drv
= bs
->drv
;
3193 struct iovec iov
= {0};
3196 int max_write_zeroes
= bs
->bl
.max_write_zeroes
?
3197 bs
->bl
.max_write_zeroes
: MAX_WRITE_ZEROES_DEFAULT
;
3199 while (nb_sectors
> 0 && !ret
) {
3200 int num
= nb_sectors
;
3202 /* Align request. Block drivers can expect the "bulk" of the request
3205 if (bs
->bl
.write_zeroes_alignment
3206 && num
> bs
->bl
.write_zeroes_alignment
) {
3207 if (sector_num
% bs
->bl
.write_zeroes_alignment
!= 0) {
3208 /* Make a small request up to the first aligned sector. */
3209 num
= bs
->bl
.write_zeroes_alignment
;
3210 num
-= sector_num
% bs
->bl
.write_zeroes_alignment
;
3211 } else if ((sector_num
+ num
) % bs
->bl
.write_zeroes_alignment
!= 0) {
3212 /* Shorten the request to the last aligned sector. num cannot
3213 * underflow because num > bs->bl.write_zeroes_alignment.
3215 num
-= (sector_num
+ num
) % bs
->bl
.write_zeroes_alignment
;
3219 /* limit request size */
3220 if (num
> max_write_zeroes
) {
3221 num
= max_write_zeroes
;
3225 /* First try the efficient write zeroes operation */
3226 if (drv
->bdrv_co_write_zeroes
) {
3227 ret
= drv
->bdrv_co_write_zeroes(bs
, sector_num
, num
, flags
);
3230 if (ret
== -ENOTSUP
) {
3231 /* Fall back to bounce buffer if write zeroes is unsupported */
3232 iov
.iov_len
= num
* BDRV_SECTOR_SIZE
;
3233 if (iov
.iov_base
== NULL
) {
3234 iov
.iov_base
= qemu_blockalign(bs
, num
* BDRV_SECTOR_SIZE
);
3235 memset(iov
.iov_base
, 0, num
* BDRV_SECTOR_SIZE
);
3237 qemu_iovec_init_external(&qiov
, &iov
, 1);
3239 ret
= drv
->bdrv_co_writev(bs
, sector_num
, num
, &qiov
);
3241 /* Keep bounce buffer around if it is big enough for all
3242 * all future requests.
3244 if (num
< max_write_zeroes
) {
3245 qemu_vfree(iov
.iov_base
);
3246 iov
.iov_base
= NULL
;
3254 qemu_vfree(iov
.iov_base
);
3259 * Forwards an already correctly aligned write request to the BlockDriver.
3261 static int coroutine_fn
bdrv_aligned_pwritev(BlockDriverState
*bs
,
3262 BdrvTrackedRequest
*req
, int64_t offset
, unsigned int bytes
,
3263 QEMUIOVector
*qiov
, int flags
)
3265 BlockDriver
*drv
= bs
->drv
;
3269 int64_t sector_num
= offset
>> BDRV_SECTOR_BITS
;
3270 unsigned int nb_sectors
= bytes
>> BDRV_SECTOR_BITS
;
3272 assert((offset
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3273 assert((bytes
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3275 waited
= wait_serialising_requests(req
);
3276 assert(!waited
|| !req
->serialising
);
3277 assert(req
->overlap_offset
<= offset
);
3278 assert(offset
+ bytes
<= req
->overlap_offset
+ req
->overlap_bytes
);
3280 ret
= notifier_with_return_list_notify(&bs
->before_write_notifiers
, req
);
3282 if (!ret
&& bs
->detect_zeroes
!= BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF
&&
3283 !(flags
& BDRV_REQ_ZERO_WRITE
) && drv
->bdrv_co_write_zeroes
&&
3284 qemu_iovec_is_zero(qiov
)) {
3285 flags
|= BDRV_REQ_ZERO_WRITE
;
3286 if (bs
->detect_zeroes
== BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP
) {
3287 flags
|= BDRV_REQ_MAY_UNMAP
;
3292 /* Do nothing, write notifier decided to fail this request */
3293 } else if (flags
& BDRV_REQ_ZERO_WRITE
) {
3294 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_ZERO
);
3295 ret
= bdrv_co_do_write_zeroes(bs
, sector_num
, nb_sectors
, flags
);
3297 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV
);
3298 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, qiov
);
3300 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_DONE
);
3302 if (ret
== 0 && !bs
->enable_write_cache
) {
3303 ret
= bdrv_co_flush(bs
);
3306 bdrv_set_dirty(bs
, sector_num
, nb_sectors
);
3308 if (bs
->wr_highest_sector
< sector_num
+ nb_sectors
- 1) {
3309 bs
->wr_highest_sector
= sector_num
+ nb_sectors
- 1;
3311 if (bs
->growable
&& ret
>= 0) {
3312 bs
->total_sectors
= MAX(bs
->total_sectors
, sector_num
+ nb_sectors
);
3319 * Handle a write request in coroutine context
3321 static int coroutine_fn
bdrv_co_do_pwritev(BlockDriverState
*bs
,
3322 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
3323 BdrvRequestFlags flags
)
3325 BdrvTrackedRequest req
;
3326 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3327 uint64_t align
= MAX(BDRV_SECTOR_SIZE
, bs
->request_alignment
);
3328 uint8_t *head_buf
= NULL
;
3329 uint8_t *tail_buf
= NULL
;
3330 QEMUIOVector local_qiov
;
3331 bool use_local_qiov
= false;
3337 if (bs
->read_only
) {
3340 if (bdrv_check_byte_request(bs
, offset
, bytes
)) {
3344 /* throttling disk I/O */
3345 if (bs
->io_limits_enabled
) {
3346 bdrv_io_limits_intercept(bs
, bytes
, true);
3350 * Align write if necessary by performing a read-modify-write cycle.
3351 * Pad qiov with the read parts and be sure to have a tracked request not
3352 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3354 tracked_request_begin(&req
, bs
, offset
, bytes
, true);
3356 if (offset
& (align
- 1)) {
3357 QEMUIOVector head_qiov
;
3358 struct iovec head_iov
;
3360 mark_request_serialising(&req
, align
);
3361 wait_serialising_requests(&req
);
3363 head_buf
= qemu_blockalign(bs
, align
);
3364 head_iov
= (struct iovec
) {
3365 .iov_base
= head_buf
,
3368 qemu_iovec_init_external(&head_qiov
, &head_iov
, 1);
3370 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_HEAD
);
3371 ret
= bdrv_aligned_preadv(bs
, &req
, offset
& ~(align
- 1), align
,
3372 align
, &head_qiov
, 0);
3376 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_AFTER_HEAD
);
3378 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 2);
3379 qemu_iovec_add(&local_qiov
, head_buf
, offset
& (align
- 1));
3380 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3381 use_local_qiov
= true;
3383 bytes
+= offset
& (align
- 1);
3384 offset
= offset
& ~(align
- 1);
3387 if ((offset
+ bytes
) & (align
- 1)) {
3388 QEMUIOVector tail_qiov
;
3389 struct iovec tail_iov
;
3393 mark_request_serialising(&req
, align
);
3394 waited
= wait_serialising_requests(&req
);
3395 assert(!waited
|| !use_local_qiov
);
3397 tail_buf
= qemu_blockalign(bs
, align
);
3398 tail_iov
= (struct iovec
) {
3399 .iov_base
= tail_buf
,
3402 qemu_iovec_init_external(&tail_qiov
, &tail_iov
, 1);
3404 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_TAIL
);
3405 ret
= bdrv_aligned_preadv(bs
, &req
, (offset
+ bytes
) & ~(align
- 1), align
,
3406 align
, &tail_qiov
, 0);
3410 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_AFTER_TAIL
);
3412 if (!use_local_qiov
) {
3413 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 1);
3414 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3415 use_local_qiov
= true;
3418 tail_bytes
= (offset
+ bytes
) & (align
- 1);
3419 qemu_iovec_add(&local_qiov
, tail_buf
+ tail_bytes
, align
- tail_bytes
);
3421 bytes
= ROUND_UP(bytes
, align
);
3424 ret
= bdrv_aligned_pwritev(bs
, &req
, offset
, bytes
,
3425 use_local_qiov
? &local_qiov
: qiov
,
3429 tracked_request_end(&req
);
3431 if (use_local_qiov
) {
3432 qemu_iovec_destroy(&local_qiov
);
3434 qemu_vfree(head_buf
);
3435 qemu_vfree(tail_buf
);
3440 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
3441 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
3442 BdrvRequestFlags flags
)
3444 if (nb_sectors
< 0 || nb_sectors
> (INT_MAX
>> BDRV_SECTOR_BITS
)) {
3448 return bdrv_co_do_pwritev(bs
, sector_num
<< BDRV_SECTOR_BITS
,
3449 nb_sectors
<< BDRV_SECTOR_BITS
, qiov
, flags
);
3452 int coroutine_fn
bdrv_co_writev(BlockDriverState
*bs
, int64_t sector_num
,
3453 int nb_sectors
, QEMUIOVector
*qiov
)
3455 trace_bdrv_co_writev(bs
, sector_num
, nb_sectors
);
3457 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, qiov
, 0);
3460 int coroutine_fn
bdrv_co_write_zeroes(BlockDriverState
*bs
,
3461 int64_t sector_num
, int nb_sectors
,
3462 BdrvRequestFlags flags
)
3464 trace_bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
, flags
);
3466 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
3467 flags
&= ~BDRV_REQ_MAY_UNMAP
;
3470 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, NULL
,
3471 BDRV_REQ_ZERO_WRITE
| flags
);
3475 * Truncate file to 'offset' bytes (needed only for file protocols)
3477 int bdrv_truncate(BlockDriverState
*bs
, int64_t offset
)
3479 BlockDriver
*drv
= bs
->drv
;
3483 if (!drv
->bdrv_truncate
)
3488 ret
= drv
->bdrv_truncate(bs
, offset
);
3490 ret
= refresh_total_sectors(bs
, offset
>> BDRV_SECTOR_BITS
);
3491 bdrv_dev_resize_cb(bs
);
3497 * Length of a allocated file in bytes. Sparse files are counted by actual
3498 * allocated space. Return < 0 if error or unknown.
3500 int64_t bdrv_get_allocated_file_size(BlockDriverState
*bs
)
3502 BlockDriver
*drv
= bs
->drv
;
3506 if (drv
->bdrv_get_allocated_file_size
) {
3507 return drv
->bdrv_get_allocated_file_size(bs
);
3510 return bdrv_get_allocated_file_size(bs
->file
);
3516 * Length of a file in bytes. Return < 0 if error or unknown.
3518 int64_t bdrv_getlength(BlockDriverState
*bs
)
3520 BlockDriver
*drv
= bs
->drv
;
3524 if (drv
->has_variable_length
) {
3525 int ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
3530 return bs
->total_sectors
* BDRV_SECTOR_SIZE
;
3533 /* return 0 as number of sectors if no device present or error */
3534 void bdrv_get_geometry(BlockDriverState
*bs
, uint64_t *nb_sectors_ptr
)
3537 length
= bdrv_getlength(bs
);
3541 length
= length
>> BDRV_SECTOR_BITS
;
3542 *nb_sectors_ptr
= length
;
3545 void bdrv_set_on_error(BlockDriverState
*bs
, BlockdevOnError on_read_error
,
3546 BlockdevOnError on_write_error
)
3548 bs
->on_read_error
= on_read_error
;
3549 bs
->on_write_error
= on_write_error
;
3552 BlockdevOnError
bdrv_get_on_error(BlockDriverState
*bs
, bool is_read
)
3554 return is_read
? bs
->on_read_error
: bs
->on_write_error
;
3557 BlockErrorAction
bdrv_get_error_action(BlockDriverState
*bs
, bool is_read
, int error
)
3559 BlockdevOnError on_err
= is_read
? bs
->on_read_error
: bs
->on_write_error
;
3562 case BLOCKDEV_ON_ERROR_ENOSPC
:
3563 return (error
== ENOSPC
) ?
3564 BLOCK_ERROR_ACTION_STOP
: BLOCK_ERROR_ACTION_REPORT
;
3565 case BLOCKDEV_ON_ERROR_STOP
:
3566 return BLOCK_ERROR_ACTION_STOP
;
3567 case BLOCKDEV_ON_ERROR_REPORT
:
3568 return BLOCK_ERROR_ACTION_REPORT
;
3569 case BLOCKDEV_ON_ERROR_IGNORE
:
3570 return BLOCK_ERROR_ACTION_IGNORE
;
3576 /* This is done by device models because, while the block layer knows
3577 * about the error, it does not know whether an operation comes from
3578 * the device or the block layer (from a job, for example).
3580 void bdrv_error_action(BlockDriverState
*bs
, BlockErrorAction action
,
3581 bool is_read
, int error
)
3585 if (action
== BLOCK_ERROR_ACTION_STOP
) {
3586 /* First set the iostatus, so that "info block" returns an iostatus
3587 * that matches the events raised so far (an additional error iostatus
3588 * is fine, but not a lost one).
3590 bdrv_iostatus_set_err(bs
, error
);
3592 /* Then raise the request to stop the VM and the event.
3593 * qemu_system_vmstop_request_prepare has two effects. First,
3594 * it ensures that the STOP event always comes after the
3595 * BLOCK_IO_ERROR event. Second, it ensures that even if management
3596 * can observe the STOP event and do a "cont" before the STOP
3597 * event is issued, the VM will not stop. In this case, vm_start()
3598 * also ensures that the STOP/RESUME pair of events is emitted.
3600 qemu_system_vmstop_request_prepare();
3601 qapi_event_send_block_io_error(bdrv_get_device_name(bs
),
3602 is_read
? IO_OPERATION_TYPE_READ
:
3603 IO_OPERATION_TYPE_WRITE
,
3604 action
, &error_abort
);
3605 qemu_system_vmstop_request(RUN_STATE_IO_ERROR
);
3607 qapi_event_send_block_io_error(bdrv_get_device_name(bs
),
3608 is_read
? IO_OPERATION_TYPE_READ
:
3609 IO_OPERATION_TYPE_WRITE
,
3610 action
, &error_abort
);
3614 int bdrv_is_read_only(BlockDriverState
*bs
)
3616 return bs
->read_only
;
3619 int bdrv_is_sg(BlockDriverState
*bs
)
3624 int bdrv_enable_write_cache(BlockDriverState
*bs
)
3626 return bs
->enable_write_cache
;
3629 void bdrv_set_enable_write_cache(BlockDriverState
*bs
, bool wce
)
3631 bs
->enable_write_cache
= wce
;
3633 /* so a reopen() will preserve wce */
3635 bs
->open_flags
|= BDRV_O_CACHE_WB
;
3637 bs
->open_flags
&= ~BDRV_O_CACHE_WB
;
3641 int bdrv_is_encrypted(BlockDriverState
*bs
)
3643 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
3645 return bs
->encrypted
;
3648 int bdrv_key_required(BlockDriverState
*bs
)
3650 BlockDriverState
*backing_hd
= bs
->backing_hd
;
3652 if (backing_hd
&& backing_hd
->encrypted
&& !backing_hd
->valid_key
)
3654 return (bs
->encrypted
&& !bs
->valid_key
);
3657 int bdrv_set_key(BlockDriverState
*bs
, const char *key
)
3660 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
) {
3661 ret
= bdrv_set_key(bs
->backing_hd
, key
);
3667 if (!bs
->encrypted
) {
3669 } else if (!bs
->drv
|| !bs
->drv
->bdrv_set_key
) {
3672 ret
= bs
->drv
->bdrv_set_key(bs
, key
);
3675 } else if (!bs
->valid_key
) {
3677 /* call the change callback now, we skipped it on open */
3678 bdrv_dev_change_media_cb(bs
, true);
3683 const char *bdrv_get_format_name(BlockDriverState
*bs
)
3685 return bs
->drv
? bs
->drv
->format_name
: NULL
;
3688 void bdrv_iterate_format(void (*it
)(void *opaque
, const char *name
),
3693 const char **formats
= NULL
;
3695 QLIST_FOREACH(drv
, &bdrv_drivers
, list
) {
3696 if (drv
->format_name
) {
3699 while (formats
&& i
&& !found
) {
3700 found
= !strcmp(formats
[--i
], drv
->format_name
);
3704 formats
= g_realloc(formats
, (count
+ 1) * sizeof(char *));
3705 formats
[count
++] = drv
->format_name
;
3706 it(opaque
, drv
->format_name
);
3713 /* This function is to find block backend bs */
3714 BlockDriverState
*bdrv_find(const char *name
)
3716 BlockDriverState
*bs
;
3718 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3719 if (!strcmp(name
, bs
->device_name
)) {
3726 /* This function is to find a node in the bs graph */
3727 BlockDriverState
*bdrv_find_node(const char *node_name
)
3729 BlockDriverState
*bs
;
3733 QTAILQ_FOREACH(bs
, &graph_bdrv_states
, node_list
) {
3734 if (!strcmp(node_name
, bs
->node_name
)) {
3741 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3742 BlockDeviceInfoList
*bdrv_named_nodes_list(void)
3744 BlockDeviceInfoList
*list
, *entry
;
3745 BlockDriverState
*bs
;
3748 QTAILQ_FOREACH(bs
, &graph_bdrv_states
, node_list
) {
3749 entry
= g_malloc0(sizeof(*entry
));
3750 entry
->value
= bdrv_block_device_info(bs
);
3758 BlockDriverState
*bdrv_lookup_bs(const char *device
,
3759 const char *node_name
,
3762 BlockDriverState
*bs
= NULL
;
3765 bs
= bdrv_find(device
);
3773 bs
= bdrv_find_node(node_name
);
3780 error_setg(errp
, "Cannot find device=%s nor node_name=%s",
3781 device
? device
: "",
3782 node_name
? node_name
: "");
3786 BlockDriverState
*bdrv_next(BlockDriverState
*bs
)
3789 return QTAILQ_FIRST(&bdrv_states
);
3791 return QTAILQ_NEXT(bs
, device_list
);
3794 void bdrv_iterate(void (*it
)(void *opaque
, BlockDriverState
*bs
), void *opaque
)
3796 BlockDriverState
*bs
;
3798 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3803 const char *bdrv_get_device_name(BlockDriverState
*bs
)
3805 return bs
->device_name
;
3808 int bdrv_get_flags(BlockDriverState
*bs
)
3810 return bs
->open_flags
;
3813 int bdrv_flush_all(void)
3815 BlockDriverState
*bs
;
3818 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3819 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
3822 aio_context_acquire(aio_context
);
3823 ret
= bdrv_flush(bs
);
3824 if (ret
< 0 && !result
) {
3827 aio_context_release(aio_context
);
3833 int bdrv_has_zero_init_1(BlockDriverState
*bs
)
3838 int bdrv_has_zero_init(BlockDriverState
*bs
)
3842 /* If BS is a copy on write image, it is initialized to
3843 the contents of the base image, which may not be zeroes. */
3844 if (bs
->backing_hd
) {
3847 if (bs
->drv
->bdrv_has_zero_init
) {
3848 return bs
->drv
->bdrv_has_zero_init(bs
);
3855 bool bdrv_unallocated_blocks_are_zero(BlockDriverState
*bs
)
3857 BlockDriverInfo bdi
;
3859 if (bs
->backing_hd
) {
3863 if (bdrv_get_info(bs
, &bdi
) == 0) {
3864 return bdi
.unallocated_blocks_are_zero
;
3870 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState
*bs
)
3872 BlockDriverInfo bdi
;
3874 if (bs
->backing_hd
|| !(bs
->open_flags
& BDRV_O_UNMAP
)) {
3878 if (bdrv_get_info(bs
, &bdi
) == 0) {
3879 return bdi
.can_write_zeroes_with_unmap
;
3885 typedef struct BdrvCoGetBlockStatusData
{
3886 BlockDriverState
*bs
;
3887 BlockDriverState
*base
;
3893 } BdrvCoGetBlockStatusData
;
3896 * Returns true iff the specified sector is present in the disk image. Drivers
3897 * not implementing the functionality are assumed to not support backing files,
3898 * hence all their sectors are reported as allocated.
3900 * If 'sector_num' is beyond the end of the disk image the return value is 0
3901 * and 'pnum' is set to 0.
3903 * 'pnum' is set to the number of sectors (including and immediately following
3904 * the specified sector) that are known to be in the same
3905 * allocated/unallocated state.
3907 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3908 * beyond the end of the disk image it will be clamped.
3910 static int64_t coroutine_fn
bdrv_co_get_block_status(BlockDriverState
*bs
,
3912 int nb_sectors
, int *pnum
)
3918 length
= bdrv_getlength(bs
);
3923 if (sector_num
>= (length
>> BDRV_SECTOR_BITS
)) {
3928 n
= bs
->total_sectors
- sector_num
;
3929 if (n
< nb_sectors
) {
3933 if (!bs
->drv
->bdrv_co_get_block_status
) {
3935 ret
= BDRV_BLOCK_DATA
| BDRV_BLOCK_ALLOCATED
;
3936 if (bs
->drv
->protocol_name
) {
3937 ret
|= BDRV_BLOCK_OFFSET_VALID
| (sector_num
* BDRV_SECTOR_SIZE
);
3942 ret
= bs
->drv
->bdrv_co_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
3948 if (ret
& BDRV_BLOCK_RAW
) {
3949 assert(ret
& BDRV_BLOCK_OFFSET_VALID
);
3950 return bdrv_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
3954 if (ret
& (BDRV_BLOCK_DATA
| BDRV_BLOCK_ZERO
)) {
3955 ret
|= BDRV_BLOCK_ALLOCATED
;
3958 if (!(ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
)) {
3959 if (bdrv_unallocated_blocks_are_zero(bs
)) {
3960 ret
|= BDRV_BLOCK_ZERO
;
3961 } else if (bs
->backing_hd
) {
3962 BlockDriverState
*bs2
= bs
->backing_hd
;
3963 int64_t length2
= bdrv_getlength(bs2
);
3964 if (length2
>= 0 && sector_num
>= (length2
>> BDRV_SECTOR_BITS
)) {
3965 ret
|= BDRV_BLOCK_ZERO
;
3971 (ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
) &&
3972 (ret
& BDRV_BLOCK_OFFSET_VALID
)) {
3973 ret2
= bdrv_co_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
3976 /* Ignore errors. This is just providing extra information, it
3977 * is useful but not necessary.
3979 ret
|= (ret2
& BDRV_BLOCK_ZERO
);
3986 /* Coroutine wrapper for bdrv_get_block_status() */
3987 static void coroutine_fn
bdrv_get_block_status_co_entry(void *opaque
)
3989 BdrvCoGetBlockStatusData
*data
= opaque
;
3990 BlockDriverState
*bs
= data
->bs
;
3992 data
->ret
= bdrv_co_get_block_status(bs
, data
->sector_num
, data
->nb_sectors
,
3998 * Synchronous wrapper around bdrv_co_get_block_status().
4000 * See bdrv_co_get_block_status() for details.
4002 int64_t bdrv_get_block_status(BlockDriverState
*bs
, int64_t sector_num
,
4003 int nb_sectors
, int *pnum
)
4006 BdrvCoGetBlockStatusData data
= {
4008 .sector_num
= sector_num
,
4009 .nb_sectors
= nb_sectors
,
4014 if (qemu_in_coroutine()) {
4015 /* Fast-path if already in coroutine context */
4016 bdrv_get_block_status_co_entry(&data
);
4018 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
4020 co
= qemu_coroutine_create(bdrv_get_block_status_co_entry
);
4021 qemu_coroutine_enter(co
, &data
);
4022 while (!data
.done
) {
4023 aio_poll(aio_context
, true);
4029 int coroutine_fn
bdrv_is_allocated(BlockDriverState
*bs
, int64_t sector_num
,
4030 int nb_sectors
, int *pnum
)
4032 int64_t ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
4036 return (ret
& BDRV_BLOCK_ALLOCATED
);
4040 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
4042 * Return true if the given sector is allocated in any image between
4043 * BASE and TOP (inclusive). BASE can be NULL to check if the given
4044 * sector is allocated in any image of the chain. Return false otherwise.
4046 * 'pnum' is set to the number of sectors (including and immediately following
4047 * the specified sector) that are known to be in the same
4048 * allocated/unallocated state.
4051 int bdrv_is_allocated_above(BlockDriverState
*top
,
4052 BlockDriverState
*base
,
4054 int nb_sectors
, int *pnum
)
4056 BlockDriverState
*intermediate
;
4057 int ret
, n
= nb_sectors
;
4060 while (intermediate
&& intermediate
!= base
) {
4062 ret
= bdrv_is_allocated(intermediate
, sector_num
, nb_sectors
,
4072 * [sector_num, nb_sectors] is unallocated on top but intermediate
4075 * [sector_num+x, nr_sectors] allocated.
4077 if (n
> pnum_inter
&&
4078 (intermediate
== top
||
4079 sector_num
+ pnum_inter
< intermediate
->total_sectors
)) {
4083 intermediate
= intermediate
->backing_hd
;
4090 const char *bdrv_get_encrypted_filename(BlockDriverState
*bs
)
4092 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
4093 return bs
->backing_file
;
4094 else if (bs
->encrypted
)
4095 return bs
->filename
;
4100 void bdrv_get_backing_filename(BlockDriverState
*bs
,
4101 char *filename
, int filename_size
)
4103 pstrcpy(filename
, filename_size
, bs
->backing_file
);
4106 int bdrv_write_compressed(BlockDriverState
*bs
, int64_t sector_num
,
4107 const uint8_t *buf
, int nb_sectors
)
4109 BlockDriver
*drv
= bs
->drv
;
4112 if (!drv
->bdrv_write_compressed
)
4114 if (bdrv_check_request(bs
, sector_num
, nb_sectors
))
4117 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
4119 return drv
->bdrv_write_compressed(bs
, sector_num
, buf
, nb_sectors
);
4122 int bdrv_get_info(BlockDriverState
*bs
, BlockDriverInfo
*bdi
)
4124 BlockDriver
*drv
= bs
->drv
;
4127 if (!drv
->bdrv_get_info
)
4129 memset(bdi
, 0, sizeof(*bdi
));
4130 return drv
->bdrv_get_info(bs
, bdi
);
4133 ImageInfoSpecific
*bdrv_get_specific_info(BlockDriverState
*bs
)
4135 BlockDriver
*drv
= bs
->drv
;
4136 if (drv
&& drv
->bdrv_get_specific_info
) {
4137 return drv
->bdrv_get_specific_info(bs
);
4142 int bdrv_save_vmstate(BlockDriverState
*bs
, const uint8_t *buf
,
4143 int64_t pos
, int size
)
4146 struct iovec iov
= {
4147 .iov_base
= (void *) buf
,
4151 qemu_iovec_init_external(&qiov
, &iov
, 1);
4152 return bdrv_writev_vmstate(bs
, &qiov
, pos
);
4155 int bdrv_writev_vmstate(BlockDriverState
*bs
, QEMUIOVector
*qiov
, int64_t pos
)
4157 BlockDriver
*drv
= bs
->drv
;
4161 } else if (drv
->bdrv_save_vmstate
) {
4162 return drv
->bdrv_save_vmstate(bs
, qiov
, pos
);
4163 } else if (bs
->file
) {
4164 return bdrv_writev_vmstate(bs
->file
, qiov
, pos
);
4170 int bdrv_load_vmstate(BlockDriverState
*bs
, uint8_t *buf
,
4171 int64_t pos
, int size
)
4173 BlockDriver
*drv
= bs
->drv
;
4176 if (drv
->bdrv_load_vmstate
)
4177 return drv
->bdrv_load_vmstate(bs
, buf
, pos
, size
);
4179 return bdrv_load_vmstate(bs
->file
, buf
, pos
, size
);
4183 void bdrv_debug_event(BlockDriverState
*bs
, BlkDebugEvent event
)
4185 if (!bs
|| !bs
->drv
|| !bs
->drv
->bdrv_debug_event
) {
4189 bs
->drv
->bdrv_debug_event(bs
, event
);
4192 int bdrv_debug_breakpoint(BlockDriverState
*bs
, const char *event
,
4195 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_breakpoint
) {
4199 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_breakpoint
) {
4200 return bs
->drv
->bdrv_debug_breakpoint(bs
, event
, tag
);
4206 int bdrv_debug_remove_breakpoint(BlockDriverState
*bs
, const char *tag
)
4208 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_remove_breakpoint
) {
4212 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_remove_breakpoint
) {
4213 return bs
->drv
->bdrv_debug_remove_breakpoint(bs
, tag
);
4219 int bdrv_debug_resume(BlockDriverState
*bs
, const char *tag
)
4221 while (bs
&& (!bs
->drv
|| !bs
->drv
->bdrv_debug_resume
)) {
4225 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_resume
) {
4226 return bs
->drv
->bdrv_debug_resume(bs
, tag
);
4232 bool bdrv_debug_is_suspended(BlockDriverState
*bs
, const char *tag
)
4234 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_is_suspended
) {
4238 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_is_suspended
) {
4239 return bs
->drv
->bdrv_debug_is_suspended(bs
, tag
);
4245 int bdrv_is_snapshot(BlockDriverState
*bs
)
4247 return !!(bs
->open_flags
& BDRV_O_SNAPSHOT
);
4250 /* backing_file can either be relative, or absolute, or a protocol. If it is
4251 * relative, it must be relative to the chain. So, passing in bs->filename
4252 * from a BDS as backing_file should not be done, as that may be relative to
4253 * the CWD rather than the chain. */
4254 BlockDriverState
*bdrv_find_backing_image(BlockDriverState
*bs
,
4255 const char *backing_file
)
4257 char *filename_full
= NULL
;
4258 char *backing_file_full
= NULL
;
4259 char *filename_tmp
= NULL
;
4260 int is_protocol
= 0;
4261 BlockDriverState
*curr_bs
= NULL
;
4262 BlockDriverState
*retval
= NULL
;
4264 if (!bs
|| !bs
->drv
|| !backing_file
) {
4268 filename_full
= g_malloc(PATH_MAX
);
4269 backing_file_full
= g_malloc(PATH_MAX
);
4270 filename_tmp
= g_malloc(PATH_MAX
);
4272 is_protocol
= path_has_protocol(backing_file
);
4274 for (curr_bs
= bs
; curr_bs
->backing_hd
; curr_bs
= curr_bs
->backing_hd
) {
4276 /* If either of the filename paths is actually a protocol, then
4277 * compare unmodified paths; otherwise make paths relative */
4278 if (is_protocol
|| path_has_protocol(curr_bs
->backing_file
)) {
4279 if (strcmp(backing_file
, curr_bs
->backing_file
) == 0) {
4280 retval
= curr_bs
->backing_hd
;
4284 /* If not an absolute filename path, make it relative to the current
4285 * image's filename path */
4286 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
4289 /* We are going to compare absolute pathnames */
4290 if (!realpath(filename_tmp
, filename_full
)) {
4294 /* We need to make sure the backing filename we are comparing against
4295 * is relative to the current image filename (or absolute) */
4296 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
4297 curr_bs
->backing_file
);
4299 if (!realpath(filename_tmp
, backing_file_full
)) {
4303 if (strcmp(backing_file_full
, filename_full
) == 0) {
4304 retval
= curr_bs
->backing_hd
;
4310 g_free(filename_full
);
4311 g_free(backing_file_full
);
4312 g_free(filename_tmp
);
4316 int bdrv_get_backing_file_depth(BlockDriverState
*bs
)
4322 if (!bs
->backing_hd
) {
4326 return 1 + bdrv_get_backing_file_depth(bs
->backing_hd
);
4329 BlockDriverState
*bdrv_find_base(BlockDriverState
*bs
)
4331 BlockDriverState
*curr_bs
= NULL
;
4339 while (curr_bs
->backing_hd
) {
4340 curr_bs
= curr_bs
->backing_hd
;
4345 /**************************************************************/
4348 BlockDriverAIOCB
*bdrv_aio_readv(BlockDriverState
*bs
, int64_t sector_num
,
4349 QEMUIOVector
*qiov
, int nb_sectors
,
4350 BlockDriverCompletionFunc
*cb
, void *opaque
)
4352 trace_bdrv_aio_readv(bs
, sector_num
, nb_sectors
, opaque
);
4354 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, 0,
4358 BlockDriverAIOCB
*bdrv_aio_writev(BlockDriverState
*bs
, int64_t sector_num
,
4359 QEMUIOVector
*qiov
, int nb_sectors
,
4360 BlockDriverCompletionFunc
*cb
, void *opaque
)
4362 trace_bdrv_aio_writev(bs
, sector_num
, nb_sectors
, opaque
);
4364 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, 0,
4368 BlockDriverAIOCB
*bdrv_aio_write_zeroes(BlockDriverState
*bs
,
4369 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
,
4370 BlockDriverCompletionFunc
*cb
, void *opaque
)
4372 trace_bdrv_aio_write_zeroes(bs
, sector_num
, nb_sectors
, flags
, opaque
);
4374 return bdrv_co_aio_rw_vector(bs
, sector_num
, NULL
, nb_sectors
,
4375 BDRV_REQ_ZERO_WRITE
| flags
,
4380 typedef struct MultiwriteCB
{
4385 BlockDriverCompletionFunc
*cb
;
4387 QEMUIOVector
*free_qiov
;
4391 static void multiwrite_user_cb(MultiwriteCB
*mcb
)
4395 for (i
= 0; i
< mcb
->num_callbacks
; i
++) {
4396 mcb
->callbacks
[i
].cb(mcb
->callbacks
[i
].opaque
, mcb
->error
);
4397 if (mcb
->callbacks
[i
].free_qiov
) {
4398 qemu_iovec_destroy(mcb
->callbacks
[i
].free_qiov
);
4400 g_free(mcb
->callbacks
[i
].free_qiov
);
4404 static void multiwrite_cb(void *opaque
, int ret
)
4406 MultiwriteCB
*mcb
= opaque
;
4408 trace_multiwrite_cb(mcb
, ret
);
4410 if (ret
< 0 && !mcb
->error
) {
4414 mcb
->num_requests
--;
4415 if (mcb
->num_requests
== 0) {
4416 multiwrite_user_cb(mcb
);
4421 static int multiwrite_req_compare(const void *a
, const void *b
)
4423 const BlockRequest
*req1
= a
, *req2
= b
;
4426 * Note that we can't simply subtract req2->sector from req1->sector
4427 * here as that could overflow the return value.
4429 if (req1
->sector
> req2
->sector
) {
4431 } else if (req1
->sector
< req2
->sector
) {
4439 * Takes a bunch of requests and tries to merge them. Returns the number of
4440 * requests that remain after merging.
4442 static int multiwrite_merge(BlockDriverState
*bs
, BlockRequest
*reqs
,
4443 int num_reqs
, MultiwriteCB
*mcb
)
4447 // Sort requests by start sector
4448 qsort(reqs
, num_reqs
, sizeof(*reqs
), &multiwrite_req_compare
);
4450 // Check if adjacent requests touch the same clusters. If so, combine them,
4451 // filling up gaps with zero sectors.
4453 for (i
= 1; i
< num_reqs
; i
++) {
4455 int64_t oldreq_last
= reqs
[outidx
].sector
+ reqs
[outidx
].nb_sectors
;
4457 // Handle exactly sequential writes and overlapping writes.
4458 if (reqs
[i
].sector
<= oldreq_last
) {
4462 if (reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1 > IOV_MAX
) {
4468 QEMUIOVector
*qiov
= g_malloc0(sizeof(*qiov
));
4469 qemu_iovec_init(qiov
,
4470 reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1);
4472 // Add the first request to the merged one. If the requests are
4473 // overlapping, drop the last sectors of the first request.
4474 size
= (reqs
[i
].sector
- reqs
[outidx
].sector
) << 9;
4475 qemu_iovec_concat(qiov
, reqs
[outidx
].qiov
, 0, size
);
4477 // We should need to add any zeros between the two requests
4478 assert (reqs
[i
].sector
<= oldreq_last
);
4480 // Add the second request
4481 qemu_iovec_concat(qiov
, reqs
[i
].qiov
, 0, reqs
[i
].qiov
->size
);
4483 reqs
[outidx
].nb_sectors
= qiov
->size
>> 9;
4484 reqs
[outidx
].qiov
= qiov
;
4486 mcb
->callbacks
[i
].free_qiov
= reqs
[outidx
].qiov
;
4489 reqs
[outidx
].sector
= reqs
[i
].sector
;
4490 reqs
[outidx
].nb_sectors
= reqs
[i
].nb_sectors
;
4491 reqs
[outidx
].qiov
= reqs
[i
].qiov
;
4499 * Submit multiple AIO write requests at once.
4501 * On success, the function returns 0 and all requests in the reqs array have
4502 * been submitted. In error case this function returns -1, and any of the
4503 * requests may or may not be submitted yet. In particular, this means that the
4504 * callback will be called for some of the requests, for others it won't. The
4505 * caller must check the error field of the BlockRequest to wait for the right
4506 * callbacks (if error != 0, no callback will be called).
4508 * The implementation may modify the contents of the reqs array, e.g. to merge
4509 * requests. However, the fields opaque and error are left unmodified as they
4510 * are used to signal failure for a single request to the caller.
4512 int bdrv_aio_multiwrite(BlockDriverState
*bs
, BlockRequest
*reqs
, int num_reqs
)
4517 /* don't submit writes if we don't have a medium */
4518 if (bs
->drv
== NULL
) {
4519 for (i
= 0; i
< num_reqs
; i
++) {
4520 reqs
[i
].error
= -ENOMEDIUM
;
4525 if (num_reqs
== 0) {
4529 // Create MultiwriteCB structure
4530 mcb
= g_malloc0(sizeof(*mcb
) + num_reqs
* sizeof(*mcb
->callbacks
));
4531 mcb
->num_requests
= 0;
4532 mcb
->num_callbacks
= num_reqs
;
4534 for (i
= 0; i
< num_reqs
; i
++) {
4535 mcb
->callbacks
[i
].cb
= reqs
[i
].cb
;
4536 mcb
->callbacks
[i
].opaque
= reqs
[i
].opaque
;
4539 // Check for mergable requests
4540 num_reqs
= multiwrite_merge(bs
, reqs
, num_reqs
, mcb
);
4542 trace_bdrv_aio_multiwrite(mcb
, mcb
->num_callbacks
, num_reqs
);
4544 /* Run the aio requests. */
4545 mcb
->num_requests
= num_reqs
;
4546 for (i
= 0; i
< num_reqs
; i
++) {
4547 bdrv_co_aio_rw_vector(bs
, reqs
[i
].sector
, reqs
[i
].qiov
,
4548 reqs
[i
].nb_sectors
, reqs
[i
].flags
,
4556 void bdrv_aio_cancel(BlockDriverAIOCB
*acb
)
4558 acb
->aiocb_info
->cancel(acb
);
4561 /**************************************************************/
4562 /* async block device emulation */
4564 typedef struct BlockDriverAIOCBSync
{
4565 BlockDriverAIOCB common
;
4568 /* vector translation state */
4572 } BlockDriverAIOCBSync
;
4574 static void bdrv_aio_cancel_em(BlockDriverAIOCB
*blockacb
)
4576 BlockDriverAIOCBSync
*acb
=
4577 container_of(blockacb
, BlockDriverAIOCBSync
, common
);
4578 qemu_bh_delete(acb
->bh
);
4580 qemu_aio_release(acb
);
4583 static const AIOCBInfo bdrv_em_aiocb_info
= {
4584 .aiocb_size
= sizeof(BlockDriverAIOCBSync
),
4585 .cancel
= bdrv_aio_cancel_em
,
4588 static void bdrv_aio_bh_cb(void *opaque
)
4590 BlockDriverAIOCBSync
*acb
= opaque
;
4593 qemu_iovec_from_buf(acb
->qiov
, 0, acb
->bounce
, acb
->qiov
->size
);
4594 qemu_vfree(acb
->bounce
);
4595 acb
->common
.cb(acb
->common
.opaque
, acb
->ret
);
4596 qemu_bh_delete(acb
->bh
);
4598 qemu_aio_release(acb
);
4601 static BlockDriverAIOCB
*bdrv_aio_rw_vector(BlockDriverState
*bs
,
4605 BlockDriverCompletionFunc
*cb
,
4610 BlockDriverAIOCBSync
*acb
;
4612 acb
= qemu_aio_get(&bdrv_em_aiocb_info
, bs
, cb
, opaque
);
4613 acb
->is_write
= is_write
;
4615 acb
->bounce
= qemu_blockalign(bs
, qiov
->size
);
4616 acb
->bh
= aio_bh_new(bdrv_get_aio_context(bs
), bdrv_aio_bh_cb
, acb
);
4619 qemu_iovec_to_buf(acb
->qiov
, 0, acb
->bounce
, qiov
->size
);
4620 acb
->ret
= bs
->drv
->bdrv_write(bs
, sector_num
, acb
->bounce
, nb_sectors
);
4622 acb
->ret
= bs
->drv
->bdrv_read(bs
, sector_num
, acb
->bounce
, nb_sectors
);
4625 qemu_bh_schedule(acb
->bh
);
4627 return &acb
->common
;
4630 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
4631 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
4632 BlockDriverCompletionFunc
*cb
, void *opaque
)
4634 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 0);
4637 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
4638 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
4639 BlockDriverCompletionFunc
*cb
, void *opaque
)
4641 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 1);
4645 typedef struct BlockDriverAIOCBCoroutine
{
4646 BlockDriverAIOCB common
;
4651 } BlockDriverAIOCBCoroutine
;
4653 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB
*blockacb
)
4655 AioContext
*aio_context
= bdrv_get_aio_context(blockacb
->bs
);
4656 BlockDriverAIOCBCoroutine
*acb
=
4657 container_of(blockacb
, BlockDriverAIOCBCoroutine
, common
);
4662 aio_poll(aio_context
, true);
4666 static const AIOCBInfo bdrv_em_co_aiocb_info
= {
4667 .aiocb_size
= sizeof(BlockDriverAIOCBCoroutine
),
4668 .cancel
= bdrv_aio_co_cancel_em
,
4671 static void bdrv_co_em_bh(void *opaque
)
4673 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4675 acb
->common
.cb(acb
->common
.opaque
, acb
->req
.error
);
4681 qemu_bh_delete(acb
->bh
);
4682 qemu_aio_release(acb
);
4685 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4686 static void coroutine_fn
bdrv_co_do_rw(void *opaque
)
4688 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4689 BlockDriverState
*bs
= acb
->common
.bs
;
4691 if (!acb
->is_write
) {
4692 acb
->req
.error
= bdrv_co_do_readv(bs
, acb
->req
.sector
,
4693 acb
->req
.nb_sectors
, acb
->req
.qiov
, acb
->req
.flags
);
4695 acb
->req
.error
= bdrv_co_do_writev(bs
, acb
->req
.sector
,
4696 acb
->req
.nb_sectors
, acb
->req
.qiov
, acb
->req
.flags
);
4699 acb
->bh
= aio_bh_new(bdrv_get_aio_context(bs
), bdrv_co_em_bh
, acb
);
4700 qemu_bh_schedule(acb
->bh
);
4703 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
4707 BdrvRequestFlags flags
,
4708 BlockDriverCompletionFunc
*cb
,
4713 BlockDriverAIOCBCoroutine
*acb
;
4715 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4716 acb
->req
.sector
= sector_num
;
4717 acb
->req
.nb_sectors
= nb_sectors
;
4718 acb
->req
.qiov
= qiov
;
4719 acb
->req
.flags
= flags
;
4720 acb
->is_write
= is_write
;
4723 co
= qemu_coroutine_create(bdrv_co_do_rw
);
4724 qemu_coroutine_enter(co
, acb
);
4726 return &acb
->common
;
4729 static void coroutine_fn
bdrv_aio_flush_co_entry(void *opaque
)
4731 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4732 BlockDriverState
*bs
= acb
->common
.bs
;
4734 acb
->req
.error
= bdrv_co_flush(bs
);
4735 acb
->bh
= aio_bh_new(bdrv_get_aio_context(bs
), bdrv_co_em_bh
, acb
);
4736 qemu_bh_schedule(acb
->bh
);
4739 BlockDriverAIOCB
*bdrv_aio_flush(BlockDriverState
*bs
,
4740 BlockDriverCompletionFunc
*cb
, void *opaque
)
4742 trace_bdrv_aio_flush(bs
, opaque
);
4745 BlockDriverAIOCBCoroutine
*acb
;
4747 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4750 co
= qemu_coroutine_create(bdrv_aio_flush_co_entry
);
4751 qemu_coroutine_enter(co
, acb
);
4753 return &acb
->common
;
4756 static void coroutine_fn
bdrv_aio_discard_co_entry(void *opaque
)
4758 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4759 BlockDriverState
*bs
= acb
->common
.bs
;
4761 acb
->req
.error
= bdrv_co_discard(bs
, acb
->req
.sector
, acb
->req
.nb_sectors
);
4762 acb
->bh
= aio_bh_new(bdrv_get_aio_context(bs
), bdrv_co_em_bh
, acb
);
4763 qemu_bh_schedule(acb
->bh
);
4766 BlockDriverAIOCB
*bdrv_aio_discard(BlockDriverState
*bs
,
4767 int64_t sector_num
, int nb_sectors
,
4768 BlockDriverCompletionFunc
*cb
, void *opaque
)
4771 BlockDriverAIOCBCoroutine
*acb
;
4773 trace_bdrv_aio_discard(bs
, sector_num
, nb_sectors
, opaque
);
4775 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4776 acb
->req
.sector
= sector_num
;
4777 acb
->req
.nb_sectors
= nb_sectors
;
4779 co
= qemu_coroutine_create(bdrv_aio_discard_co_entry
);
4780 qemu_coroutine_enter(co
, acb
);
4782 return &acb
->common
;
4785 void bdrv_init(void)
4787 module_call_init(MODULE_INIT_BLOCK
);
4790 void bdrv_init_with_whitelist(void)
4792 use_bdrv_whitelist
= 1;
4796 void *qemu_aio_get(const AIOCBInfo
*aiocb_info
, BlockDriverState
*bs
,
4797 BlockDriverCompletionFunc
*cb
, void *opaque
)
4799 BlockDriverAIOCB
*acb
;
4801 acb
= g_slice_alloc(aiocb_info
->aiocb_size
);
4802 acb
->aiocb_info
= aiocb_info
;
4805 acb
->opaque
= opaque
;
4809 void qemu_aio_release(void *p
)
4811 BlockDriverAIOCB
*acb
= p
;
4812 g_slice_free1(acb
->aiocb_info
->aiocb_size
, acb
);
4815 /**************************************************************/
4816 /* Coroutine block device emulation */
4818 typedef struct CoroutineIOCompletion
{
4819 Coroutine
*coroutine
;
4821 } CoroutineIOCompletion
;
4823 static void bdrv_co_io_em_complete(void *opaque
, int ret
)
4825 CoroutineIOCompletion
*co
= opaque
;
4828 qemu_coroutine_enter(co
->coroutine
, NULL
);
4831 static int coroutine_fn
bdrv_co_io_em(BlockDriverState
*bs
, int64_t sector_num
,
4832 int nb_sectors
, QEMUIOVector
*iov
,
4835 CoroutineIOCompletion co
= {
4836 .coroutine
= qemu_coroutine_self(),
4838 BlockDriverAIOCB
*acb
;
4841 acb
= bs
->drv
->bdrv_aio_writev(bs
, sector_num
, iov
, nb_sectors
,
4842 bdrv_co_io_em_complete
, &co
);
4844 acb
= bs
->drv
->bdrv_aio_readv(bs
, sector_num
, iov
, nb_sectors
,
4845 bdrv_co_io_em_complete
, &co
);
4848 trace_bdrv_co_io_em(bs
, sector_num
, nb_sectors
, is_write
, acb
);
4852 qemu_coroutine_yield();
4857 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
4858 int64_t sector_num
, int nb_sectors
,
4861 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, false);
4864 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
4865 int64_t sector_num
, int nb_sectors
,
4868 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, true);
4871 static void coroutine_fn
bdrv_flush_co_entry(void *opaque
)
4873 RwCo
*rwco
= opaque
;
4875 rwco
->ret
= bdrv_co_flush(rwco
->bs
);
4878 int coroutine_fn
bdrv_co_flush(BlockDriverState
*bs
)
4882 if (!bs
|| !bdrv_is_inserted(bs
) || bdrv_is_read_only(bs
)) {
4886 /* Write back cached data to the OS even with cache=unsafe */
4887 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_OS
);
4888 if (bs
->drv
->bdrv_co_flush_to_os
) {
4889 ret
= bs
->drv
->bdrv_co_flush_to_os(bs
);
4895 /* But don't actually force it to the disk with cache=unsafe */
4896 if (bs
->open_flags
& BDRV_O_NO_FLUSH
) {
4900 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_DISK
);
4901 if (bs
->drv
->bdrv_co_flush_to_disk
) {
4902 ret
= bs
->drv
->bdrv_co_flush_to_disk(bs
);
4903 } else if (bs
->drv
->bdrv_aio_flush
) {
4904 BlockDriverAIOCB
*acb
;
4905 CoroutineIOCompletion co
= {
4906 .coroutine
= qemu_coroutine_self(),
4909 acb
= bs
->drv
->bdrv_aio_flush(bs
, bdrv_co_io_em_complete
, &co
);
4913 qemu_coroutine_yield();
4918 * Some block drivers always operate in either writethrough or unsafe
4919 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4920 * know how the server works (because the behaviour is hardcoded or
4921 * depends on server-side configuration), so we can't ensure that
4922 * everything is safe on disk. Returning an error doesn't work because
4923 * that would break guests even if the server operates in writethrough
4926 * Let's hope the user knows what he's doing.
4934 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4935 * in the case of cache=unsafe, so there are no useless flushes.
4938 return bdrv_co_flush(bs
->file
);
4941 void bdrv_invalidate_cache(BlockDriverState
*bs
, Error
**errp
)
4943 Error
*local_err
= NULL
;
4950 if (bs
->drv
->bdrv_invalidate_cache
) {
4951 bs
->drv
->bdrv_invalidate_cache(bs
, &local_err
);
4952 } else if (bs
->file
) {
4953 bdrv_invalidate_cache(bs
->file
, &local_err
);
4956 error_propagate(errp
, local_err
);
4960 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
4962 error_setg_errno(errp
, -ret
, "Could not refresh total sector count");
4967 void bdrv_invalidate_cache_all(Error
**errp
)
4969 BlockDriverState
*bs
;
4970 Error
*local_err
= NULL
;
4972 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
4973 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
4975 aio_context_acquire(aio_context
);
4976 bdrv_invalidate_cache(bs
, &local_err
);
4977 aio_context_release(aio_context
);
4979 error_propagate(errp
, local_err
);
4985 void bdrv_clear_incoming_migration_all(void)
4987 BlockDriverState
*bs
;
4989 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
4990 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
4992 aio_context_acquire(aio_context
);
4993 bs
->open_flags
= bs
->open_flags
& ~(BDRV_O_INCOMING
);
4994 aio_context_release(aio_context
);
4998 int bdrv_flush(BlockDriverState
*bs
)
5006 if (qemu_in_coroutine()) {
5007 /* Fast-path if already in coroutine context */
5008 bdrv_flush_co_entry(&rwco
);
5010 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
5012 co
= qemu_coroutine_create(bdrv_flush_co_entry
);
5013 qemu_coroutine_enter(co
, &rwco
);
5014 while (rwco
.ret
== NOT_DONE
) {
5015 aio_poll(aio_context
, true);
5022 typedef struct DiscardCo
{
5023 BlockDriverState
*bs
;
5028 static void coroutine_fn
bdrv_discard_co_entry(void *opaque
)
5030 DiscardCo
*rwco
= opaque
;
5032 rwco
->ret
= bdrv_co_discard(rwco
->bs
, rwco
->sector_num
, rwco
->nb_sectors
);
5035 /* if no limit is specified in the BlockLimits use a default
5036 * of 32768 512-byte sectors (16 MiB) per request.
5038 #define MAX_DISCARD_DEFAULT 32768
5040 int coroutine_fn
bdrv_co_discard(BlockDriverState
*bs
, int64_t sector_num
,
5047 } else if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
5049 } else if (bs
->read_only
) {
5053 bdrv_reset_dirty(bs
, sector_num
, nb_sectors
);
5055 /* Do nothing if disabled. */
5056 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
5060 if (!bs
->drv
->bdrv_co_discard
&& !bs
->drv
->bdrv_aio_discard
) {
5064 max_discard
= bs
->bl
.max_discard
? bs
->bl
.max_discard
: MAX_DISCARD_DEFAULT
;
5065 while (nb_sectors
> 0) {
5067 int num
= nb_sectors
;
5070 if (bs
->bl
.discard_alignment
&&
5071 num
>= bs
->bl
.discard_alignment
&&
5072 sector_num
% bs
->bl
.discard_alignment
) {
5073 if (num
> bs
->bl
.discard_alignment
) {
5074 num
= bs
->bl
.discard_alignment
;
5076 num
-= sector_num
% bs
->bl
.discard_alignment
;
5079 /* limit request size */
5080 if (num
> max_discard
) {
5084 if (bs
->drv
->bdrv_co_discard
) {
5085 ret
= bs
->drv
->bdrv_co_discard(bs
, sector_num
, num
);
5087 BlockDriverAIOCB
*acb
;
5088 CoroutineIOCompletion co
= {
5089 .coroutine
= qemu_coroutine_self(),
5092 acb
= bs
->drv
->bdrv_aio_discard(bs
, sector_num
, nb_sectors
,
5093 bdrv_co_io_em_complete
, &co
);
5097 qemu_coroutine_yield();
5101 if (ret
&& ret
!= -ENOTSUP
) {
5111 int bdrv_discard(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
)
5116 .sector_num
= sector_num
,
5117 .nb_sectors
= nb_sectors
,
5121 if (qemu_in_coroutine()) {
5122 /* Fast-path if already in coroutine context */
5123 bdrv_discard_co_entry(&rwco
);
5125 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
5127 co
= qemu_coroutine_create(bdrv_discard_co_entry
);
5128 qemu_coroutine_enter(co
, &rwco
);
5129 while (rwco
.ret
== NOT_DONE
) {
5130 aio_poll(aio_context
, true);
5137 /**************************************************************/
5138 /* removable device support */
5141 * Return TRUE if the media is present
5143 int bdrv_is_inserted(BlockDriverState
*bs
)
5145 BlockDriver
*drv
= bs
->drv
;
5149 if (!drv
->bdrv_is_inserted
)
5151 return drv
->bdrv_is_inserted(bs
);
5155 * Return whether the media changed since the last call to this
5156 * function, or -ENOTSUP if we don't know. Most drivers don't know.
5158 int bdrv_media_changed(BlockDriverState
*bs
)
5160 BlockDriver
*drv
= bs
->drv
;
5162 if (drv
&& drv
->bdrv_media_changed
) {
5163 return drv
->bdrv_media_changed(bs
);
5169 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5171 void bdrv_eject(BlockDriverState
*bs
, bool eject_flag
)
5173 BlockDriver
*drv
= bs
->drv
;
5175 if (drv
&& drv
->bdrv_eject
) {
5176 drv
->bdrv_eject(bs
, eject_flag
);
5179 if (bs
->device_name
[0] != '\0') {
5180 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs
),
5181 eject_flag
, &error_abort
);
5186 * Lock or unlock the media (if it is locked, the user won't be able
5187 * to eject it manually).
5189 void bdrv_lock_medium(BlockDriverState
*bs
, bool locked
)
5191 BlockDriver
*drv
= bs
->drv
;
5193 trace_bdrv_lock_medium(bs
, locked
);
5195 if (drv
&& drv
->bdrv_lock_medium
) {
5196 drv
->bdrv_lock_medium(bs
, locked
);
5200 /* needed for generic scsi interface */
5202 int bdrv_ioctl(BlockDriverState
*bs
, unsigned long int req
, void *buf
)
5204 BlockDriver
*drv
= bs
->drv
;
5206 if (drv
&& drv
->bdrv_ioctl
)
5207 return drv
->bdrv_ioctl(bs
, req
, buf
);
5211 BlockDriverAIOCB
*bdrv_aio_ioctl(BlockDriverState
*bs
,
5212 unsigned long int req
, void *buf
,
5213 BlockDriverCompletionFunc
*cb
, void *opaque
)
5215 BlockDriver
*drv
= bs
->drv
;
5217 if (drv
&& drv
->bdrv_aio_ioctl
)
5218 return drv
->bdrv_aio_ioctl(bs
, req
, buf
, cb
, opaque
);
5222 void bdrv_set_guest_block_size(BlockDriverState
*bs
, int align
)
5224 bs
->guest_block_size
= align
;
5227 void *qemu_blockalign(BlockDriverState
*bs
, size_t size
)
5229 return qemu_memalign(bdrv_opt_mem_align(bs
), size
);
5233 * Check if all memory in this vector is sector aligned.
5235 bool bdrv_qiov_is_aligned(BlockDriverState
*bs
, QEMUIOVector
*qiov
)
5238 size_t alignment
= bdrv_opt_mem_align(bs
);
5240 for (i
= 0; i
< qiov
->niov
; i
++) {
5241 if ((uintptr_t) qiov
->iov
[i
].iov_base
% alignment
) {
5244 if (qiov
->iov
[i
].iov_len
% alignment
) {
5252 BdrvDirtyBitmap
*bdrv_create_dirty_bitmap(BlockDriverState
*bs
, int granularity
,
5255 int64_t bitmap_size
;
5256 BdrvDirtyBitmap
*bitmap
;
5258 assert((granularity
& (granularity
- 1)) == 0);
5260 granularity
>>= BDRV_SECTOR_BITS
;
5261 assert(granularity
);
5262 bitmap_size
= bdrv_getlength(bs
);
5263 if (bitmap_size
< 0) {
5264 error_setg_errno(errp
, -bitmap_size
, "could not get length of device");
5265 errno
= -bitmap_size
;
5268 bitmap_size
>>= BDRV_SECTOR_BITS
;
5269 bitmap
= g_malloc0(sizeof(BdrvDirtyBitmap
));
5270 bitmap
->bitmap
= hbitmap_alloc(bitmap_size
, ffs(granularity
) - 1);
5271 QLIST_INSERT_HEAD(&bs
->dirty_bitmaps
, bitmap
, list
);
5275 void bdrv_release_dirty_bitmap(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
5277 BdrvDirtyBitmap
*bm
, *next
;
5278 QLIST_FOREACH_SAFE(bm
, &bs
->dirty_bitmaps
, list
, next
) {
5280 QLIST_REMOVE(bitmap
, list
);
5281 hbitmap_free(bitmap
->bitmap
);
5288 BlockDirtyInfoList
*bdrv_query_dirty_bitmaps(BlockDriverState
*bs
)
5290 BdrvDirtyBitmap
*bm
;
5291 BlockDirtyInfoList
*list
= NULL
;
5292 BlockDirtyInfoList
**plist
= &list
;
5294 QLIST_FOREACH(bm
, &bs
->dirty_bitmaps
, list
) {
5295 BlockDirtyInfo
*info
= g_malloc0(sizeof(BlockDirtyInfo
));
5296 BlockDirtyInfoList
*entry
= g_malloc0(sizeof(BlockDirtyInfoList
));
5297 info
->count
= bdrv_get_dirty_count(bs
, bm
);
5299 ((int64_t) BDRV_SECTOR_SIZE
<< hbitmap_granularity(bm
->bitmap
));
5300 entry
->value
= info
;
5302 plist
= &entry
->next
;
5308 int bdrv_get_dirty(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
, int64_t sector
)
5311 return hbitmap_get(bitmap
->bitmap
, sector
);
5317 void bdrv_dirty_iter_init(BlockDriverState
*bs
,
5318 BdrvDirtyBitmap
*bitmap
, HBitmapIter
*hbi
)
5320 hbitmap_iter_init(hbi
, bitmap
->bitmap
, 0);
5323 void bdrv_set_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
5326 BdrvDirtyBitmap
*bitmap
;
5327 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
5328 hbitmap_set(bitmap
->bitmap
, cur_sector
, nr_sectors
);
5332 void bdrv_reset_dirty(BlockDriverState
*bs
, int64_t cur_sector
, int nr_sectors
)
5334 BdrvDirtyBitmap
*bitmap
;
5335 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
5336 hbitmap_reset(bitmap
->bitmap
, cur_sector
, nr_sectors
);
5340 int64_t bdrv_get_dirty_count(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
5342 return hbitmap_count(bitmap
->bitmap
);
5345 /* Get a reference to bs */
5346 void bdrv_ref(BlockDriverState
*bs
)
5351 /* Release a previously grabbed reference to bs.
5352 * If after releasing, reference count is zero, the BlockDriverState is
5354 void bdrv_unref(BlockDriverState
*bs
)
5356 assert(bs
->refcnt
> 0);
5357 if (--bs
->refcnt
== 0) {
5362 struct BdrvOpBlocker
{
5364 QLIST_ENTRY(BdrvOpBlocker
) list
;
5367 bool bdrv_op_is_blocked(BlockDriverState
*bs
, BlockOpType op
, Error
**errp
)
5369 BdrvOpBlocker
*blocker
;
5370 assert((int) op
>= 0 && op
< BLOCK_OP_TYPE_MAX
);
5371 if (!QLIST_EMPTY(&bs
->op_blockers
[op
])) {
5372 blocker
= QLIST_FIRST(&bs
->op_blockers
[op
]);
5374 error_setg(errp
, "Device '%s' is busy: %s",
5375 bs
->device_name
, error_get_pretty(blocker
->reason
));
5382 void bdrv_op_block(BlockDriverState
*bs
, BlockOpType op
, Error
*reason
)
5384 BdrvOpBlocker
*blocker
;
5385 assert((int) op
>= 0 && op
< BLOCK_OP_TYPE_MAX
);
5387 blocker
= g_malloc0(sizeof(BdrvOpBlocker
));
5388 blocker
->reason
= reason
;
5389 QLIST_INSERT_HEAD(&bs
->op_blockers
[op
], blocker
, list
);
5392 void bdrv_op_unblock(BlockDriverState
*bs
, BlockOpType op
, Error
*reason
)
5394 BdrvOpBlocker
*blocker
, *next
;
5395 assert((int) op
>= 0 && op
< BLOCK_OP_TYPE_MAX
);
5396 QLIST_FOREACH_SAFE(blocker
, &bs
->op_blockers
[op
], list
, next
) {
5397 if (blocker
->reason
== reason
) {
5398 QLIST_REMOVE(blocker
, list
);
5404 void bdrv_op_block_all(BlockDriverState
*bs
, Error
*reason
)
5407 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
5408 bdrv_op_block(bs
, i
, reason
);
5412 void bdrv_op_unblock_all(BlockDriverState
*bs
, Error
*reason
)
5415 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
5416 bdrv_op_unblock(bs
, i
, reason
);
5420 bool bdrv_op_blocker_is_empty(BlockDriverState
*bs
)
5424 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
5425 if (!QLIST_EMPTY(&bs
->op_blockers
[i
])) {
5432 void bdrv_iostatus_enable(BlockDriverState
*bs
)
5434 bs
->iostatus_enabled
= true;
5435 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
5438 /* The I/O status is only enabled if the drive explicitly
5439 * enables it _and_ the VM is configured to stop on errors */
5440 bool bdrv_iostatus_is_enabled(const BlockDriverState
*bs
)
5442 return (bs
->iostatus_enabled
&&
5443 (bs
->on_write_error
== BLOCKDEV_ON_ERROR_ENOSPC
||
5444 bs
->on_write_error
== BLOCKDEV_ON_ERROR_STOP
||
5445 bs
->on_read_error
== BLOCKDEV_ON_ERROR_STOP
));
5448 void bdrv_iostatus_disable(BlockDriverState
*bs
)
5450 bs
->iostatus_enabled
= false;
5453 void bdrv_iostatus_reset(BlockDriverState
*bs
)
5455 if (bdrv_iostatus_is_enabled(bs
)) {
5456 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
5458 block_job_iostatus_reset(bs
->job
);
5463 void bdrv_iostatus_set_err(BlockDriverState
*bs
, int error
)
5465 assert(bdrv_iostatus_is_enabled(bs
));
5466 if (bs
->iostatus
== BLOCK_DEVICE_IO_STATUS_OK
) {
5467 bs
->iostatus
= error
== ENOSPC
? BLOCK_DEVICE_IO_STATUS_NOSPACE
:
5468 BLOCK_DEVICE_IO_STATUS_FAILED
;
5473 bdrv_acct_start(BlockDriverState
*bs
, BlockAcctCookie
*cookie
, int64_t bytes
,
5474 enum BlockAcctType type
)
5476 assert(type
< BDRV_MAX_IOTYPE
);
5478 cookie
->bytes
= bytes
;
5479 cookie
->start_time_ns
= get_clock();
5480 cookie
->type
= type
;
5484 bdrv_acct_done(BlockDriverState
*bs
, BlockAcctCookie
*cookie
)
5486 assert(cookie
->type
< BDRV_MAX_IOTYPE
);
5488 bs
->nr_bytes
[cookie
->type
] += cookie
->bytes
;
5489 bs
->nr_ops
[cookie
->type
]++;
5490 bs
->total_time_ns
[cookie
->type
] += get_clock() - cookie
->start_time_ns
;
5493 void bdrv_img_create(const char *filename
, const char *fmt
,
5494 const char *base_filename
, const char *base_fmt
,
5495 char *options
, uint64_t img_size
, int flags
,
5496 Error
**errp
, bool quiet
)
5498 QemuOptsList
*create_opts
= NULL
;
5499 QemuOpts
*opts
= NULL
;
5500 const char *backing_fmt
, *backing_file
;
5502 BlockDriver
*drv
, *proto_drv
;
5503 BlockDriver
*backing_drv
= NULL
;
5504 Error
*local_err
= NULL
;
5507 /* Find driver and parse its options */
5508 drv
= bdrv_find_format(fmt
);
5510 error_setg(errp
, "Unknown file format '%s'", fmt
);
5514 proto_drv
= bdrv_find_protocol(filename
, true);
5516 error_setg(errp
, "Unknown protocol '%s'", filename
);
5520 create_opts
= qemu_opts_append(create_opts
, drv
->create_opts
);
5521 create_opts
= qemu_opts_append(create_opts
, proto_drv
->create_opts
);
5523 /* Create parameter list with default values */
5524 opts
= qemu_opts_create(create_opts
, NULL
, 0, &error_abort
);
5525 qemu_opt_set_number(opts
, BLOCK_OPT_SIZE
, img_size
);
5527 /* Parse -o options */
5529 if (qemu_opts_do_parse(opts
, options
, NULL
) != 0) {
5530 error_setg(errp
, "Invalid options for file format '%s'", fmt
);
5535 if (base_filename
) {
5536 if (qemu_opt_set(opts
, BLOCK_OPT_BACKING_FILE
, base_filename
)) {
5537 error_setg(errp
, "Backing file not supported for file format '%s'",
5544 if (qemu_opt_set(opts
, BLOCK_OPT_BACKING_FMT
, base_fmt
)) {
5545 error_setg(errp
, "Backing file format not supported for file "
5546 "format '%s'", fmt
);
5551 backing_file
= qemu_opt_get(opts
, BLOCK_OPT_BACKING_FILE
);
5553 if (!strcmp(filename
, backing_file
)) {
5554 error_setg(errp
, "Error: Trying to create an image with the "
5555 "same filename as the backing file");
5560 backing_fmt
= qemu_opt_get(opts
, BLOCK_OPT_BACKING_FMT
);
5562 backing_drv
= bdrv_find_format(backing_fmt
);
5564 error_setg(errp
, "Unknown backing file format '%s'",
5570 // The size for the image must always be specified, with one exception:
5571 // If we are using a backing file, we can obtain the size from there
5572 size
= qemu_opt_get_size(opts
, BLOCK_OPT_SIZE
, 0);
5575 BlockDriverState
*bs
;
5579 /* backing files always opened read-only */
5581 flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
5584 ret
= bdrv_open(&bs
, backing_file
, NULL
, NULL
, back_flags
,
5585 backing_drv
, &local_err
);
5587 error_setg_errno(errp
, -ret
, "Could not open '%s': %s",
5589 error_get_pretty(local_err
));
5590 error_free(local_err
);
5594 bdrv_get_geometry(bs
, &size
);
5597 qemu_opt_set_number(opts
, BLOCK_OPT_SIZE
, size
);
5601 error_setg(errp
, "Image creation needs a size parameter");
5607 printf("Formatting '%s', fmt=%s ", filename
, fmt
);
5608 qemu_opts_print(opts
);
5612 ret
= bdrv_create(drv
, filename
, opts
, &local_err
);
5614 if (ret
== -EFBIG
) {
5615 /* This is generally a better message than whatever the driver would
5616 * deliver (especially because of the cluster_size_hint), since that
5617 * is most probably not much different from "image too large". */
5618 const char *cluster_size_hint
= "";
5619 if (qemu_opt_get_size(opts
, BLOCK_OPT_CLUSTER_SIZE
, 0)) {
5620 cluster_size_hint
= " (try using a larger cluster size)";
5622 error_setg(errp
, "The image size is too large for file format '%s'"
5623 "%s", fmt
, cluster_size_hint
);
5624 error_free(local_err
);
5629 qemu_opts_del(opts
);
5630 qemu_opts_free(create_opts
);
5632 error_propagate(errp
, local_err
);
5636 AioContext
*bdrv_get_aio_context(BlockDriverState
*bs
)
5638 return bs
->aio_context
;
5641 void bdrv_detach_aio_context(BlockDriverState
*bs
)
5647 if (bs
->io_limits_enabled
) {
5648 throttle_detach_aio_context(&bs
->throttle_state
);
5650 if (bs
->drv
->bdrv_detach_aio_context
) {
5651 bs
->drv
->bdrv_detach_aio_context(bs
);
5654 bdrv_detach_aio_context(bs
->file
);
5656 if (bs
->backing_hd
) {
5657 bdrv_detach_aio_context(bs
->backing_hd
);
5660 bs
->aio_context
= NULL
;
5663 void bdrv_attach_aio_context(BlockDriverState
*bs
,
5664 AioContext
*new_context
)
5670 bs
->aio_context
= new_context
;
5672 if (bs
->backing_hd
) {
5673 bdrv_attach_aio_context(bs
->backing_hd
, new_context
);
5676 bdrv_attach_aio_context(bs
->file
, new_context
);
5678 if (bs
->drv
->bdrv_attach_aio_context
) {
5679 bs
->drv
->bdrv_attach_aio_context(bs
, new_context
);
5681 if (bs
->io_limits_enabled
) {
5682 throttle_attach_aio_context(&bs
->throttle_state
, new_context
);
5686 void bdrv_set_aio_context(BlockDriverState
*bs
, AioContext
*new_context
)
5688 bdrv_drain_all(); /* ensure there are no in-flight requests */
5690 bdrv_detach_aio_context(bs
);
5692 /* This function executes in the old AioContext so acquire the new one in
5693 * case it runs in a different thread.
5695 aio_context_acquire(new_context
);
5696 bdrv_attach_aio_context(bs
, new_context
);
5697 aio_context_release(new_context
);
5700 void bdrv_add_before_write_notifier(BlockDriverState
*bs
,
5701 NotifierWithReturn
*notifier
)
5703 notifier_with_return_list_add(&bs
->before_write_notifiers
, notifier
);
5706 int bdrv_amend_options(BlockDriverState
*bs
, QemuOpts
*opts
)
5708 if (!bs
->drv
->bdrv_amend_options
) {
5711 return bs
->drv
->bdrv_amend_options(bs
, opts
);
5714 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5715 * of block filter and by bdrv_is_first_non_filter.
5716 * It is used to test if the given bs is the candidate or recurse more in the
5719 bool bdrv_recurse_is_first_non_filter(BlockDriverState
*bs
,
5720 BlockDriverState
*candidate
)
5722 /* return false if basic checks fails */
5723 if (!bs
|| !bs
->drv
) {
5727 /* the code reached a non block filter driver -> check if the bs is
5728 * the same as the candidate. It's the recursion termination condition.
5730 if (!bs
->drv
->is_filter
) {
5731 return bs
== candidate
;
5733 /* Down this path the driver is a block filter driver */
5735 /* If the block filter recursion method is defined use it to recurse down
5738 if (bs
->drv
->bdrv_recurse_is_first_non_filter
) {
5739 return bs
->drv
->bdrv_recurse_is_first_non_filter(bs
, candidate
);
5742 /* the driver is a block filter but don't allow to recurse -> return false
5747 /* This function checks if the candidate is the first non filter bs down it's
5748 * bs chain. Since we don't have pointers to parents it explore all bs chains
5749 * from the top. Some filters can choose not to pass down the recursion.
5751 bool bdrv_is_first_non_filter(BlockDriverState
*candidate
)
5753 BlockDriverState
*bs
;
5755 /* walk down the bs forest recursively */
5756 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
5759 /* try to recurse in this top level bs */
5760 perm
= bdrv_recurse_is_first_non_filter(bs
, candidate
);
5762 /* candidate is the first non filter */
5771 BlockDriverState
*check_to_replace_node(const char *node_name
, Error
**errp
)
5773 BlockDriverState
*to_replace_bs
= bdrv_find_node(node_name
);
5774 if (!to_replace_bs
) {
5775 error_setg(errp
, "Node name '%s' not found", node_name
);
5779 if (bdrv_op_is_blocked(to_replace_bs
, BLOCK_OP_TYPE_REPLACE
, errp
)) {
5783 /* We don't want arbitrary node of the BDS chain to be replaced only the top
5784 * most non filter in order to prevent data corruption.
5785 * Another benefit is that this tests exclude backing files which are
5786 * blocked by the backing blockers.
5788 if (!bdrv_is_first_non_filter(to_replace_bs
)) {
5789 error_setg(errp
, "Only top most non filter can be replaced");
5793 return to_replace_bs
;