hw/arm/strongarm.c

   1 /*
   2  * StrongARM SA-1100/SA-1110 emulation
   3  *
   4  * Copyright (C) 2011 Dmitry Eremin-Solenikov
   5  *
   6  * Largely based on StrongARM emulation:
   7  * Copyright (c) 2006 Openedhand Ltd.
   8  * Written by Andrzej Zaborowski <balrog@zabor.org>
   9  *
  10  * UART code based on QEMU 16550A UART emulation
  11  * Copyright (c) 2003-2004 Fabrice Bellard
  12  * Copyright (c) 2008 Citrix Systems, Inc.
  13  *
  14  *  This program is free software; you can redistribute it and/or modify
  15  *  it under the terms of the GNU General Public License version 2 as
  16  *  published by the Free Software Foundation.
  17  *
  18  *  This program is distributed in the hope that it will be useful,
  19  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  *  GNU General Public License for more details.
  22  *
  23  *  You should have received a copy of the GNU General Public License along
  24  *  with this program; if not, see <http://www.gnu.org/licenses/>.
  25  *
  26  *  Contributions after 2012-01-13 are licensed under the terms of the
  27  *  GNU GPL, version 2 or (at your option) any later version.
  28  */
  29
  30 #include "qemu/osdep.h"
  31 #include "qemu-common.h"
  32 #include "cpu.h"
  33 #include "hw/irq.h"
  34 #include "hw/qdev-properties.h"
  35 #include "hw/qdev-properties-system.h"
  36 #include "hw/sysbus.h"
  37 #include "migration/vmstate.h"
  38 #include "strongarm.h"
  39 #include "qemu/error-report.h"
  40 #include "hw/arm/boot.h"
  41 #include "chardev/char-fe.h"
  42 #include "chardev/char-serial.h"
  43 #include "sysemu/sysemu.h"
  44 #include "hw/ssi/ssi.h"
  45 #include "qapi/error.h"
  46 #include "qemu/cutils.h"
  47 #include "qemu/log.h"
  48 #include "qom/object.h"
  49
  50 //#define DEBUG
  51
  52 /*
  53  TODO
  54  - Implement cp15, c14 ?
  55  - Implement cp15, c15 !!! (idle used in L)
  56  - Implement idle mode handling/DIM
  57  - Implement sleep mode/Wake sources
  58  - Implement reset control
  59  - Implement memory control regs
  60  - PCMCIA handling
  61  - Maybe support MBGNT/MBREQ
  62  - DMA channels
  63  - GPCLK
  64  - IrDA
  65  - MCP
  66  - Enhance UART with modem signals
  67  */
  68
  69 #ifdef DEBUG
  70 # define DPRINTF(format, ...) printf(format , ## __VA_ARGS__)
  71 #else
  72 # define DPRINTF(format, ...) do { } while (0)
  73 #endif
  74
  75 static struct {
  76     hwaddr io_base;
  77     int irq;
  78 } sa_serial[] = {
  79     { 0x80010000, SA_PIC_UART1 },
  80     { 0x80030000, SA_PIC_UART2 },
  81     { 0x80050000, SA_PIC_UART3 },
  82     { 0, 0 }
  83 };
  84
  85 /* Interrupt Controller */
  86
  87 #define TYPE_STRONGARM_PIC "strongarm_pic"
  88 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMPICState, STRONGARM_PIC)
  89
  90 struct StrongARMPICState {
  91     SysBusDevice parent_obj;
  92
  93     MemoryRegion iomem;
  94     qemu_irq    irq;
  95     qemu_irq    fiq;
  96
  97     uint32_t pending;
  98     uint32_t enabled;
  99     uint32_t is_fiq;
 100     uint32_t int_idle;
 101 };
 102
 103 #define ICIP    0x00
 104 #define ICMR    0x04
 105 #define ICLR    0x08
 106 #define ICFP    0x10
 107 #define ICPR    0x20
 108 #define ICCR    0x0c
 109
 110 #define SA_PIC_SRCS     32
 111
 112
 113 static void strongarm_pic_update(void *opaque)
 114 {
 115     StrongARMPICState *s = opaque;
 116
 117     /* FIXME: reflect DIM */
 118     qemu_set_irq(s->fiq, s->pending & s->enabled &  s->is_fiq);
 119     qemu_set_irq(s->irq, s->pending & s->enabled & ~s->is_fiq);
 120 }
 121
 122 static void strongarm_pic_set_irq(void *opaque, int irq, int level)
 123 {
 124     StrongARMPICState *s = opaque;
 125
 126     if (level) {
 127         s->pending |= 1 << irq;
 128     } else {
 129         s->pending &= ~(1 << irq);
 130     }
 131
 132     strongarm_pic_update(s);
 133 }
 134
 135 static uint64_t strongarm_pic_mem_read(void *opaque, hwaddr offset,
 136                                        unsigned size)
 137 {
 138     StrongARMPICState *s = opaque;
 139
 140     switch (offset) {
 141     case ICIP:
 142         return s->pending & ~s->is_fiq & s->enabled;
 143     case ICMR:
 144         return s->enabled;
 145     case ICLR:
 146         return s->is_fiq;
 147     case ICCR:
 148         return s->int_idle == 0;
 149     case ICFP:
 150         return s->pending & s->is_fiq & s->enabled;
 151     case ICPR:
 152         return s->pending;
 153     default:
 154         printf("%s: Bad register offset 0x" TARGET_FMT_plx "\n",
 155                         __func__, offset);
 156         return 0;
 157     }
 158 }
 159
 160 static void strongarm_pic_mem_write(void *opaque, hwaddr offset,
 161                                     uint64_t value, unsigned size)
 162 {
 163     StrongARMPICState *s = opaque;
 164
 165     switch (offset) {
 166     case ICMR:
 167         s->enabled = value;
 168         break;
 169     case ICLR:
 170         s->is_fiq = value;
 171         break;
 172     case ICCR:
 173         s->int_idle = (value & 1) ? 0 : ~0;
 174         break;
 175     default:
 176         printf("%s: Bad register offset 0x" TARGET_FMT_plx "\n",
 177                         __func__, offset);
 178         break;
 179     }
 180     strongarm_pic_update(s);
 181 }
 182
 183 static const MemoryRegionOps strongarm_pic_ops = {
 184     .read = strongarm_pic_mem_read,
 185     .write = strongarm_pic_mem_write,
 186     .endianness = DEVICE_NATIVE_ENDIAN,
 187 };
 188
 189 static void strongarm_pic_initfn(Object *obj)
 190 {
 191     DeviceState *dev = DEVICE(obj);
 192     StrongARMPICState *s = STRONGARM_PIC(obj);
 193     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 194
 195     qdev_init_gpio_in(dev, strongarm_pic_set_irq, SA_PIC_SRCS);
 196     memory_region_init_io(&s->iomem, obj, &strongarm_pic_ops, s,
 197                           "pic", 0x1000);
 198     sysbus_init_mmio(sbd, &s->iomem);
 199     sysbus_init_irq(sbd, &s->irq);
 200     sysbus_init_irq(sbd, &s->fiq);
 201 }
 202
 203 static int strongarm_pic_post_load(void *opaque, int version_id)
 204 {
 205     strongarm_pic_update(opaque);
 206     return 0;
 207 }
 208
 209 static const VMStateDescription vmstate_strongarm_pic_regs = {
 210     .name = "strongarm_pic",
 211     .version_id = 0,
 212     .minimum_version_id = 0,
 213     .post_load = strongarm_pic_post_load,
 214     .fields = (VMStateField[]) {
 215         VMSTATE_UINT32(pending, StrongARMPICState),
 216         VMSTATE_UINT32(enabled, StrongARMPICState),
 217         VMSTATE_UINT32(is_fiq, StrongARMPICState),
 218         VMSTATE_UINT32(int_idle, StrongARMPICState),
 219         VMSTATE_END_OF_LIST(),
 220     },
 221 };
 222
 223 static void strongarm_pic_class_init(ObjectClass *klass, void *data)
 224 {
 225     DeviceClass *dc = DEVICE_CLASS(klass);
 226
 227     dc->desc = "StrongARM PIC";
 228     dc->vmsd = &vmstate_strongarm_pic_regs;
 229 }
 230
 231 static const TypeInfo strongarm_pic_info = {
 232     .name          = TYPE_STRONGARM_PIC,
 233     .parent        = TYPE_SYS_BUS_DEVICE,
 234     .instance_size = sizeof(StrongARMPICState),
 235     .instance_init = strongarm_pic_initfn,
 236     .class_init    = strongarm_pic_class_init,
 237 };
 238
 239 /* Real-Time Clock */
 240 #define RTAR 0x00 /* RTC Alarm register */
 241 #define RCNR 0x04 /* RTC Counter register */
 242 #define RTTR 0x08 /* RTC Timer Trim register */
 243 #define RTSR 0x10 /* RTC Status register */
 244
 245 #define RTSR_AL (1 << 0) /* RTC Alarm detected */
 246 #define RTSR_HZ (1 << 1) /* RTC 1Hz detected */
 247 #define RTSR_ALE (1 << 2) /* RTC Alarm enable */
 248 #define RTSR_HZE (1 << 3) /* RTC 1Hz enable */
 249
 250 /* 16 LSB of RTTR are clockdiv for internal trim logic,
 251  * trim delete isn't emulated, so
 252  * f = 32 768 / (RTTR_trim + 1) */
 253
 254 #define TYPE_STRONGARM_RTC "strongarm-rtc"
 255 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMRTCState, STRONGARM_RTC)
 256
 257 struct StrongARMRTCState {
 258     SysBusDevice parent_obj;
 259
 260     MemoryRegion iomem;
 261     uint32_t rttr;
 262     uint32_t rtsr;
 263     uint32_t rtar;
 264     uint32_t last_rcnr;
 265     int64_t last_hz;
 266     QEMUTimer *rtc_alarm;
 267     QEMUTimer *rtc_hz;
 268     qemu_irq rtc_irq;
 269     qemu_irq rtc_hz_irq;
 270 };
 271
 272 static inline void strongarm_rtc_int_update(StrongARMRTCState *s)
 273 {
 274     qemu_set_irq(s->rtc_irq, s->rtsr & RTSR_AL);
 275     qemu_set_irq(s->rtc_hz_irq, s->rtsr & RTSR_HZ);
 276 }
 277
 278 static void strongarm_rtc_hzupdate(StrongARMRTCState *s)
 279 {
 280     int64_t rt = qemu_clock_get_ms(rtc_clock);
 281     s->last_rcnr += ((rt - s->last_hz) << 15) /
 282             (1000 * ((s->rttr & 0xffff) + 1));
 283     s->last_hz = rt;
 284 }
 285
 286 static inline void strongarm_rtc_timer_update(StrongARMRTCState *s)
 287 {
 288     if ((s->rtsr & RTSR_HZE) && !(s->rtsr & RTSR_HZ)) {
 289         timer_mod(s->rtc_hz, s->last_hz + 1000);
 290     } else {
 291         timer_del(s->rtc_hz);
 292     }
 293
 294     if ((s->rtsr & RTSR_ALE) && !(s->rtsr & RTSR_AL)) {
 295         timer_mod(s->rtc_alarm, s->last_hz +
 296                 (((s->rtar - s->last_rcnr) * 1000 *
 297                   ((s->rttr & 0xffff) + 1)) >> 15));
 298     } else {
 299         timer_del(s->rtc_alarm);
 300     }
 301 }
 302
 303 static inline void strongarm_rtc_alarm_tick(void *opaque)
 304 {
 305     StrongARMRTCState *s = opaque;
 306     s->rtsr |= RTSR_AL;
 307     strongarm_rtc_timer_update(s);
 308     strongarm_rtc_int_update(s);
 309 }
 310
 311 static inline void strongarm_rtc_hz_tick(void *opaque)
 312 {
 313     StrongARMRTCState *s = opaque;
 314     s->rtsr |= RTSR_HZ;
 315     strongarm_rtc_timer_update(s);
 316     strongarm_rtc_int_update(s);
 317 }
 318
 319 static uint64_t strongarm_rtc_read(void *opaque, hwaddr addr,
 320                                    unsigned size)
 321 {
 322     StrongARMRTCState *s = opaque;
 323
 324     switch (addr) {
 325     case RTTR:
 326         return s->rttr;
 327     case RTSR:
 328         return s->rtsr;
 329     case RTAR:
 330         return s->rtar;
 331     case RCNR:
 332         return s->last_rcnr +
 333                 ((qemu_clock_get_ms(rtc_clock) - s->last_hz) << 15) /
 334                 (1000 * ((s->rttr & 0xffff) + 1));
 335     default:
 336         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
 337         return 0;
 338     }
 339 }
 340
 341 static void strongarm_rtc_write(void *opaque, hwaddr addr,
 342                                 uint64_t value, unsigned size)
 343 {
 344     StrongARMRTCState *s = opaque;
 345     uint32_t old_rtsr;
 346
 347     switch (addr) {
 348     case RTTR:
 349         strongarm_rtc_hzupdate(s);
 350         s->rttr = value;
 351         strongarm_rtc_timer_update(s);
 352         break;
 353
 354     case RTSR:
 355         old_rtsr = s->rtsr;
 356         s->rtsr = (value & (RTSR_ALE | RTSR_HZE)) |
 357                   (s->rtsr & ~(value & (RTSR_AL | RTSR_HZ)));
 358
 359         if (s->rtsr != old_rtsr) {
 360             strongarm_rtc_timer_update(s);
 361         }
 362
 363         strongarm_rtc_int_update(s);
 364         break;
 365
 366     case RTAR:
 367         s->rtar = value;
 368         strongarm_rtc_timer_update(s);
 369         break;
 370
 371     case RCNR:
 372         strongarm_rtc_hzupdate(s);
 373         s->last_rcnr = value;
 374         strongarm_rtc_timer_update(s);
 375         break;
 376
 377     default:
 378         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
 379     }
 380 }
 381
 382 static const MemoryRegionOps strongarm_rtc_ops = {
 383     .read = strongarm_rtc_read,
 384     .write = strongarm_rtc_write,
 385     .endianness = DEVICE_NATIVE_ENDIAN,
 386 };
 387
 388 static void strongarm_rtc_init(Object *obj)
 389 {
 390     StrongARMRTCState *s = STRONGARM_RTC(obj);
 391     SysBusDevice *dev = SYS_BUS_DEVICE(obj);
 392     struct tm tm;
 393
 394     s->rttr = 0x0;
 395     s->rtsr = 0;
 396
 397     qemu_get_timedate(&tm, 0);
 398
 399     s->last_rcnr = (uint32_t) mktimegm(&tm);
 400     s->last_hz = qemu_clock_get_ms(rtc_clock);
 401
 402     sysbus_init_irq(dev, &s->rtc_irq);
 403     sysbus_init_irq(dev, &s->rtc_hz_irq);
 404
 405     memory_region_init_io(&s->iomem, obj, &strongarm_rtc_ops, s,
 406                           "rtc", 0x10000);
 407     sysbus_init_mmio(dev, &s->iomem);
 408 }
 409
 410 static void strongarm_rtc_realize(DeviceState *dev, Error **errp)
 411 {
 412     StrongARMRTCState *s = STRONGARM_RTC(dev);
 413     s->rtc_alarm = timer_new_ms(rtc_clock, strongarm_rtc_alarm_tick, s);
 414     s->rtc_hz = timer_new_ms(rtc_clock, strongarm_rtc_hz_tick, s);
 415 }
 416
 417 static int strongarm_rtc_pre_save(void *opaque)
 418 {
 419     StrongARMRTCState *s = opaque;
 420
 421     strongarm_rtc_hzupdate(s);
 422
 423     return 0;
 424 }
 425
 426 static int strongarm_rtc_post_load(void *opaque, int version_id)
 427 {
 428     StrongARMRTCState *s = opaque;
 429
 430     strongarm_rtc_timer_update(s);
 431     strongarm_rtc_int_update(s);
 432
 433     return 0;
 434 }
 435
 436 static const VMStateDescription vmstate_strongarm_rtc_regs = {
 437     .name = "strongarm-rtc",
 438     .version_id = 0,
 439     .minimum_version_id = 0,
 440     .pre_save = strongarm_rtc_pre_save,
 441     .post_load = strongarm_rtc_post_load,
 442     .fields = (VMStateField[]) {
 443         VMSTATE_UINT32(rttr, StrongARMRTCState),
 444         VMSTATE_UINT32(rtsr, StrongARMRTCState),
 445         VMSTATE_UINT32(rtar, StrongARMRTCState),
 446         VMSTATE_UINT32(last_rcnr, StrongARMRTCState),
 447         VMSTATE_INT64(last_hz, StrongARMRTCState),
 448         VMSTATE_END_OF_LIST(),
 449     },
 450 };
 451
 452 static void strongarm_rtc_sysbus_class_init(ObjectClass *klass, void *data)
 453 {
 454     DeviceClass *dc = DEVICE_CLASS(klass);
 455
 456     dc->desc = "StrongARM RTC Controller";
 457     dc->vmsd = &vmstate_strongarm_rtc_regs;
 458     dc->realize = strongarm_rtc_realize;
 459 }
 460
 461 static const TypeInfo strongarm_rtc_sysbus_info = {
 462     .name          = TYPE_STRONGARM_RTC,
 463     .parent        = TYPE_SYS_BUS_DEVICE,
 464     .instance_size = sizeof(StrongARMRTCState),
 465     .instance_init = strongarm_rtc_init,
 466     .class_init    = strongarm_rtc_sysbus_class_init,
 467 };
 468
 469 /* GPIO */
 470 #define GPLR 0x00
 471 #define GPDR 0x04
 472 #define GPSR 0x08
 473 #define GPCR 0x0c
 474 #define GRER 0x10
 475 #define GFER 0x14
 476 #define GEDR 0x18
 477 #define GAFR 0x1c
 478
 479 #define TYPE_STRONGARM_GPIO "strongarm-gpio"
 480 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMGPIOInfo, STRONGARM_GPIO)
 481
 482 struct StrongARMGPIOInfo {
 483     SysBusDevice busdev;
 484     MemoryRegion iomem;
 485     qemu_irq handler[28];
 486     qemu_irq irqs[11];
 487     qemu_irq irqX;
 488
 489     uint32_t ilevel;
 490     uint32_t olevel;
 491     uint32_t dir;
 492     uint32_t rising;
 493     uint32_t falling;
 494     uint32_t status;
 495     uint32_t gafr;
 496
 497     uint32_t prev_level;
 498 };
 499
 500
 501 static void strongarm_gpio_irq_update(StrongARMGPIOInfo *s)
 502 {
 503     int i;
 504     for (i = 0; i < 11; i++) {
 505         qemu_set_irq(s->irqs[i], s->status & (1 << i));
 506     }
 507
 508     qemu_set_irq(s->irqX, (s->status & ~0x7ff));
 509 }
 510
 511 static void strongarm_gpio_set(void *opaque, int line, int level)
 512 {
 513     StrongARMGPIOInfo *s = opaque;
 514     uint32_t mask;
 515
 516     mask = 1 << line;
 517
 518     if (level) {
 519         s->status |= s->rising & mask &
 520                 ~s->ilevel & ~s->dir;
 521         s->ilevel |= mask;
 522     } else {
 523         s->status |= s->falling & mask &
 524                 s->ilevel & ~s->dir;
 525         s->ilevel &= ~mask;
 526     }
 527
 528     if (s->status & mask) {
 529         strongarm_gpio_irq_update(s);
 530     }
 531 }
 532
 533 static void strongarm_gpio_handler_update(StrongARMGPIOInfo *s)
 534 {
 535     uint32_t level, diff;
 536     int bit;
 537
 538     level = s->olevel & s->dir;
 539
 540     for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
 541         bit = ctz32(diff);
 542         qemu_set_irq(s->handler[bit], (level >> bit) & 1);
 543     }
 544
 545     s->prev_level = level;
 546 }
 547
 548 static uint64_t strongarm_gpio_read(void *opaque, hwaddr offset,
 549                                     unsigned size)
 550 {
 551     StrongARMGPIOInfo *s = opaque;
 552
 553     switch (offset) {
 554     case GPDR:        /* GPIO Pin-Direction registers */
 555         return s->dir;
 556
 557     case GPSR:        /* GPIO Pin-Output Set registers */
 558         qemu_log_mask(LOG_GUEST_ERROR,
 559                       "strongarm GPIO: read from write only register GPSR\n");
 560         return 0;
 561
 562     case GPCR:        /* GPIO Pin-Output Clear registers */
 563         qemu_log_mask(LOG_GUEST_ERROR,
 564                       "strongarm GPIO: read from write only register GPCR\n");
 565         return 0;
 566
 567     case GRER:        /* GPIO Rising-Edge Detect Enable registers */
 568         return s->rising;
 569
 570     case GFER:        /* GPIO Falling-Edge Detect Enable registers */
 571         return s->falling;
 572
 573     case GAFR:        /* GPIO Alternate Function registers */
 574         return s->gafr;
 575
 576     case GPLR:        /* GPIO Pin-Level registers */
 577         return (s->olevel & s->dir) |
 578                (s->ilevel & ~s->dir);
 579
 580     case GEDR:        /* GPIO Edge Detect Status registers */
 581         return s->status;
 582
 583     default:
 584         printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset);
 585     }
 586
 587     return 0;
 588 }
 589
 590 static void strongarm_gpio_write(void *opaque, hwaddr offset,
 591                                  uint64_t value, unsigned size)
 592 {
 593     StrongARMGPIOInfo *s = opaque;
 594
 595     switch (offset) {
 596     case GPDR:        /* GPIO Pin-Direction registers */
 597         s->dir = value & 0x0fffffff;
 598         strongarm_gpio_handler_update(s);
 599         break;
 600
 601     case GPSR:        /* GPIO Pin-Output Set registers */
 602         s->olevel |= value & 0x0fffffff;
 603         strongarm_gpio_handler_update(s);
 604         break;
 605
 606     case GPCR:        /* GPIO Pin-Output Clear registers */
 607         s->olevel &= ~value;
 608         strongarm_gpio_handler_update(s);
 609         break;
 610
 611     case GRER:        /* GPIO Rising-Edge Detect Enable registers */
 612         s->rising = value;
 613         break;
 614
 615     case GFER:        /* GPIO Falling-Edge Detect Enable registers */
 616         s->falling = value;
 617         break;
 618
 619     case GAFR:        /* GPIO Alternate Function registers */
 620         s->gafr = value;
 621         break;
 622
 623     case GEDR:        /* GPIO Edge Detect Status registers */
 624         s->status &= ~value;
 625         strongarm_gpio_irq_update(s);
 626         break;
 627
 628     default:
 629         printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset);
 630     }
 631 }
 632
 633 static const MemoryRegionOps strongarm_gpio_ops = {
 634     .read = strongarm_gpio_read,
 635     .write = strongarm_gpio_write,
 636     .endianness = DEVICE_NATIVE_ENDIAN,
 637 };
 638
 639 static DeviceState *strongarm_gpio_init(hwaddr base,
 640                 DeviceState *pic)
 641 {
 642     DeviceState *dev;
 643     int i;
 644
 645     dev = qdev_new(TYPE_STRONGARM_GPIO);
 646     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 647
 648     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
 649     for (i = 0; i < 12; i++)
 650         sysbus_connect_irq(SYS_BUS_DEVICE(dev), i,
 651                     qdev_get_gpio_in(pic, SA_PIC_GPIO0_EDGE + i));
 652
 653     return dev;
 654 }
 655
 656 static void strongarm_gpio_initfn(Object *obj)
 657 {
 658     DeviceState *dev = DEVICE(obj);
 659     StrongARMGPIOInfo *s = STRONGARM_GPIO(obj);
 660     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 661     int i;
 662
 663     qdev_init_gpio_in(dev, strongarm_gpio_set, 28);
 664     qdev_init_gpio_out(dev, s->handler, 28);
 665
 666     memory_region_init_io(&s->iomem, obj, &strongarm_gpio_ops, s,
 667                           "gpio", 0x1000);
 668
 669     sysbus_init_mmio(sbd, &s->iomem);
 670     for (i = 0; i < 11; i++) {
 671         sysbus_init_irq(sbd, &s->irqs[i]);
 672     }
 673     sysbus_init_irq(sbd, &s->irqX);
 674 }
 675
 676 static const VMStateDescription vmstate_strongarm_gpio_regs = {
 677     .name = "strongarm-gpio",
 678     .version_id = 0,
 679     .minimum_version_id = 0,
 680     .fields = (VMStateField[]) {
 681         VMSTATE_UINT32(ilevel, StrongARMGPIOInfo),
 682         VMSTATE_UINT32(olevel, StrongARMGPIOInfo),
 683         VMSTATE_UINT32(dir, StrongARMGPIOInfo),
 684         VMSTATE_UINT32(rising, StrongARMGPIOInfo),
 685         VMSTATE_UINT32(falling, StrongARMGPIOInfo),
 686         VMSTATE_UINT32(status, StrongARMGPIOInfo),
 687         VMSTATE_UINT32(gafr, StrongARMGPIOInfo),
 688         VMSTATE_UINT32(prev_level, StrongARMGPIOInfo),
 689         VMSTATE_END_OF_LIST(),
 690     },
 691 };
 692
 693 static void strongarm_gpio_class_init(ObjectClass *klass, void *data)
 694 {
 695     DeviceClass *dc = DEVICE_CLASS(klass);
 696
 697     dc->desc = "StrongARM GPIO controller";
 698     dc->vmsd = &vmstate_strongarm_gpio_regs;
 699 }
 700
 701 static const TypeInfo strongarm_gpio_info = {
 702     .name          = TYPE_STRONGARM_GPIO,
 703     .parent        = TYPE_SYS_BUS_DEVICE,
 704     .instance_size = sizeof(StrongARMGPIOInfo),
 705     .instance_init = strongarm_gpio_initfn,
 706     .class_init    = strongarm_gpio_class_init,
 707 };
 708
 709 /* Peripheral Pin Controller */
 710 #define PPDR 0x00
 711 #define PPSR 0x04
 712 #define PPAR 0x08
 713 #define PSDR 0x0c
 714 #define PPFR 0x10
 715
 716 #define TYPE_STRONGARM_PPC "strongarm-ppc"
 717 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMPPCInfo, STRONGARM_PPC)
 718
 719 struct StrongARMPPCInfo {
 720     SysBusDevice parent_obj;
 721
 722     MemoryRegion iomem;
 723     qemu_irq handler[28];
 724
 725     uint32_t ilevel;
 726     uint32_t olevel;
 727     uint32_t dir;
 728     uint32_t ppar;
 729     uint32_t psdr;
 730     uint32_t ppfr;
 731
 732     uint32_t prev_level;
 733 };
 734
 735 static void strongarm_ppc_set(void *opaque, int line, int level)
 736 {
 737     StrongARMPPCInfo *s = opaque;
 738
 739     if (level) {
 740         s->ilevel |= 1 << line;
 741     } else {
 742         s->ilevel &= ~(1 << line);
 743     }
 744 }
 745
 746 static void strongarm_ppc_handler_update(StrongARMPPCInfo *s)
 747 {
 748     uint32_t level, diff;
 749     int bit;
 750
 751     level = s->olevel & s->dir;
 752
 753     for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
 754         bit = ctz32(diff);
 755         qemu_set_irq(s->handler[bit], (level >> bit) & 1);
 756     }
 757
 758     s->prev_level = level;
 759 }
 760
 761 static uint64_t strongarm_ppc_read(void *opaque, hwaddr offset,
 762                                    unsigned size)
 763 {
 764     StrongARMPPCInfo *s = opaque;
 765
 766     switch (offset) {
 767     case PPDR:        /* PPC Pin Direction registers */
 768         return s->dir | ~0x3fffff;
 769
 770     case PPSR:        /* PPC Pin State registers */
 771         return (s->olevel & s->dir) |
 772                (s->ilevel & ~s->dir) |
 773                ~0x3fffff;
 774
 775     case PPAR:
 776         return s->ppar | ~0x41000;
 777
 778     case PSDR:
 779         return s->psdr;
 780
 781     case PPFR:
 782         return s->ppfr | ~0x7f001;
 783
 784     default:
 785         printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset);
 786     }
 787
 788     return 0;
 789 }
 790
 791 static void strongarm_ppc_write(void *opaque, hwaddr offset,
 792                                 uint64_t value, unsigned size)
 793 {
 794     StrongARMPPCInfo *s = opaque;
 795
 796     switch (offset) {
 797     case PPDR:        /* PPC Pin Direction registers */
 798         s->dir = value & 0x3fffff;
 799         strongarm_ppc_handler_update(s);
 800         break;
 801
 802     case PPSR:        /* PPC Pin State registers */
 803         s->olevel = value & s->dir & 0x3fffff;
 804         strongarm_ppc_handler_update(s);
 805         break;
 806
 807     case PPAR:
 808         s->ppar = value & 0x41000;
 809         break;
 810
 811     case PSDR:
 812         s->psdr = value & 0x3fffff;
 813         break;
 814
 815     case PPFR:
 816         s->ppfr = value & 0x7f001;
 817         break;
 818
 819     default:
 820         printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset);
 821     }
 822 }
 823
 824 static const MemoryRegionOps strongarm_ppc_ops = {
 825     .read = strongarm_ppc_read,
 826     .write = strongarm_ppc_write,
 827     .endianness = DEVICE_NATIVE_ENDIAN,
 828 };
 829
 830 static void strongarm_ppc_init(Object *obj)
 831 {
 832     DeviceState *dev = DEVICE(obj);
 833     StrongARMPPCInfo *s = STRONGARM_PPC(obj);
 834     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 835
 836     qdev_init_gpio_in(dev, strongarm_ppc_set, 22);
 837     qdev_init_gpio_out(dev, s->handler, 22);
 838
 839     memory_region_init_io(&s->iomem, obj, &strongarm_ppc_ops, s,
 840                           "ppc", 0x1000);
 841
 842     sysbus_init_mmio(sbd, &s->iomem);
 843 }
 844
 845 static const VMStateDescription vmstate_strongarm_ppc_regs = {
 846     .name = "strongarm-ppc",
 847     .version_id = 0,
 848     .minimum_version_id = 0,
 849     .fields = (VMStateField[]) {
 850         VMSTATE_UINT32(ilevel, StrongARMPPCInfo),
 851         VMSTATE_UINT32(olevel, StrongARMPPCInfo),
 852         VMSTATE_UINT32(dir, StrongARMPPCInfo),
 853         VMSTATE_UINT32(ppar, StrongARMPPCInfo),
 854         VMSTATE_UINT32(psdr, StrongARMPPCInfo),
 855         VMSTATE_UINT32(ppfr, StrongARMPPCInfo),
 856         VMSTATE_UINT32(prev_level, StrongARMPPCInfo),
 857         VMSTATE_END_OF_LIST(),
 858     },
 859 };
 860
 861 static void strongarm_ppc_class_init(ObjectClass *klass, void *data)
 862 {
 863     DeviceClass *dc = DEVICE_CLASS(klass);
 864
 865     dc->desc = "StrongARM PPC controller";
 866     dc->vmsd = &vmstate_strongarm_ppc_regs;
 867 }
 868
 869 static const TypeInfo strongarm_ppc_info = {
 870     .name          = TYPE_STRONGARM_PPC,
 871     .parent        = TYPE_SYS_BUS_DEVICE,
 872     .instance_size = sizeof(StrongARMPPCInfo),
 873     .instance_init = strongarm_ppc_init,
 874     .class_init    = strongarm_ppc_class_init,
 875 };
 876
 877 /* UART Ports */
 878 #define UTCR0 0x00
 879 #define UTCR1 0x04
 880 #define UTCR2 0x08
 881 #define UTCR3 0x0c
 882 #define UTDR  0x14
 883 #define UTSR0 0x1c
 884 #define UTSR1 0x20
 885
 886 #define UTCR0_PE  (1 << 0) /* Parity enable */
 887 #define UTCR0_OES (1 << 1) /* Even parity */
 888 #define UTCR0_SBS (1 << 2) /* 2 stop bits */
 889 #define UTCR0_DSS (1 << 3) /* 8-bit data */
 890
 891 #define UTCR3_RXE (1 << 0) /* Rx enable */
 892 #define UTCR3_TXE (1 << 1) /* Tx enable */
 893 #define UTCR3_BRK (1 << 2) /* Force Break */
 894 #define UTCR3_RIE (1 << 3) /* Rx int enable */
 895 #define UTCR3_TIE (1 << 4) /* Tx int enable */
 896 #define UTCR3_LBM (1 << 5) /* Loopback */
 897
 898 #define UTSR0_TFS (1 << 0) /* Tx FIFO nearly empty */
 899 #define UTSR0_RFS (1 << 1) /* Rx FIFO nearly full */
 900 #define UTSR0_RID (1 << 2) /* Receiver Idle */
 901 #define UTSR0_RBB (1 << 3) /* Receiver begin break */
 902 #define UTSR0_REB (1 << 4) /* Receiver end break */
 903 #define UTSR0_EIF (1 << 5) /* Error in FIFO */
 904
 905 #define UTSR1_RNE (1 << 1) /* Receive FIFO not empty */
 906 #define UTSR1_TNF (1 << 2) /* Transmit FIFO not full */
 907 #define UTSR1_PRE (1 << 3) /* Parity error */
 908 #define UTSR1_FRE (1 << 4) /* Frame error */
 909 #define UTSR1_ROR (1 << 5) /* Receive Over Run */
 910
 911 #define RX_FIFO_PRE (1 << 8)
 912 #define RX_FIFO_FRE (1 << 9)
 913 #define RX_FIFO_ROR (1 << 10)
 914
 915 #define TYPE_STRONGARM_UART "strongarm-uart"
 916 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMUARTState, STRONGARM_UART)
 917
 918 struct StrongARMUARTState {
 919     SysBusDevice parent_obj;
 920
 921     MemoryRegion iomem;
 922     CharBackend chr;
 923     qemu_irq irq;
 924
 925     uint8_t utcr0;
 926     uint16_t brd;
 927     uint8_t utcr3;
 928     uint8_t utsr0;
 929     uint8_t utsr1;
 930
 931     uint8_t tx_fifo[8];
 932     uint8_t tx_start;
 933     uint8_t tx_len;
 934     uint16_t rx_fifo[12]; /* value + error flags in high bits */
 935     uint8_t rx_start;
 936     uint8_t rx_len;
 937
 938     uint64_t char_transmit_time; /* time to transmit a char in nanoseconds */
 939     bool wait_break_end;
 940     QEMUTimer *rx_timeout_timer;
 941     QEMUTimer *tx_timer;
 942 };
 943
 944 static void strongarm_uart_update_status(StrongARMUARTState *s)
 945 {
 946     uint16_t utsr1 = 0;
 947
 948     if (s->tx_len != 8) {
 949         utsr1 |= UTSR1_TNF;
 950     }
 951
 952     if (s->rx_len != 0) {
 953         uint16_t ent = s->rx_fifo[s->rx_start];
 954
 955         utsr1 |= UTSR1_RNE;
 956         if (ent & RX_FIFO_PRE) {
 957             s->utsr1 |= UTSR1_PRE;
 958         }
 959         if (ent & RX_FIFO_FRE) {
 960             s->utsr1 |= UTSR1_FRE;
 961         }
 962         if (ent & RX_FIFO_ROR) {
 963             s->utsr1 |= UTSR1_ROR;
 964         }
 965     }
 966
 967     s->utsr1 = utsr1;
 968 }
 969
 970 static void strongarm_uart_update_int_status(StrongARMUARTState *s)
 971 {
 972     uint16_t utsr0 = s->utsr0 &
 973             (UTSR0_REB | UTSR0_RBB | UTSR0_RID);
 974     int i;
 975
 976     if ((s->utcr3 & UTCR3_TXE) &&
 977                 (s->utcr3 & UTCR3_TIE) &&
 978                 s->tx_len <= 4) {
 979         utsr0 |= UTSR0_TFS;
 980     }
 981
 982     if ((s->utcr3 & UTCR3_RXE) &&
 983                 (s->utcr3 & UTCR3_RIE) &&
 984                 s->rx_len > 4) {
 985         utsr0 |= UTSR0_RFS;
 986     }
 987
 988     for (i = 0; i < s->rx_len && i < 4; i++)
 989         if (s->rx_fifo[(s->rx_start + i) % 12] & ~0xff) {
 990             utsr0 |= UTSR0_EIF;
 991             break;
 992         }
 993
 994     s->utsr0 = utsr0;
 995     qemu_set_irq(s->irq, utsr0);
 996 }
 997
 998 static void strongarm_uart_update_parameters(StrongARMUARTState *s)
 999 {
1000     int speed, parity, data_bits, stop_bits, frame_size;
1001     QEMUSerialSetParams ssp;
1002
1003     /* Start bit. */
1004     frame_size = 1;
1005     if (s->utcr0 & UTCR0_PE) {
1006         /* Parity bit. */
1007         frame_size++;
1008         if (s->utcr0 & UTCR0_OES) {
1009             parity = 'E';
1010         } else {
1011             parity = 'O';
1012         }
1013     } else {
1014             parity = 'N';
1015     }
1016     if (s->utcr0 & UTCR0_SBS) {
1017         stop_bits = 2;
1018     } else {
1019         stop_bits = 1;
1020     }
1021
1022     data_bits = (s->utcr0 & UTCR0_DSS) ? 8 : 7;
1023     frame_size += data_bits + stop_bits;
1024     speed = 3686400 / 16 / (s->brd + 1);
1025     ssp.speed = speed;
1026     ssp.parity = parity;
1027     ssp.data_bits = data_bits;
1028     ssp.stop_bits = stop_bits;
1029     s->char_transmit_time =  (NANOSECONDS_PER_SECOND / speed) * frame_size;
1030     qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
1031
1032     DPRINTF(stderr, "%s speed=%d parity=%c data=%d stop=%d\n", s->chr->label,
1033             speed, parity, data_bits, stop_bits);
1034 }
1035
1036 static void strongarm_uart_rx_to(void *opaque)
1037 {
1038     StrongARMUARTState *s = opaque;
1039
1040     if (s->rx_len) {
1041         s->utsr0 |= UTSR0_RID;
1042         strongarm_uart_update_int_status(s);
1043     }
1044 }
1045
1046 static void strongarm_uart_rx_push(StrongARMUARTState *s, uint16_t c)
1047 {
1048     if ((s->utcr3 & UTCR3_RXE) == 0) {
1049         /* rx disabled */
1050         return;
1051     }
1052
1053     if (s->wait_break_end) {
1054         s->utsr0 |= UTSR0_REB;
1055         s->wait_break_end = false;
1056     }
1057
1058     if (s->rx_len < 12) {
1059         s->rx_fifo[(s->rx_start + s->rx_len) % 12] = c;
1060         s->rx_len++;
1061     } else
1062         s->rx_fifo[(s->rx_start + 11) % 12] |= RX_FIFO_ROR;
1063 }
1064
1065 static int strongarm_uart_can_receive(void *opaque)
1066 {
1067     StrongARMUARTState *s = opaque;
1068
1069     if (s->rx_len == 12) {
1070         return 0;
1071     }
1072     /* It's best not to get more than 2/3 of RX FIFO, so advertise that much */
1073     if (s->rx_len < 8) {
1074         return 8 - s->rx_len;
1075     }
1076     return 1;
1077 }
1078
1079 static void strongarm_uart_receive(void *opaque, const uint8_t *buf, int size)
1080 {
1081     StrongARMUARTState *s = opaque;
1082     int i;
1083
1084     for (i = 0; i < size; i++) {
1085         strongarm_uart_rx_push(s, buf[i]);
1086     }
1087
1088     /* call the timeout receive callback in 3 char transmit time */
1089     timer_mod(s->rx_timeout_timer,
1090                     qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 3);
1091
1092     strongarm_uart_update_status(s);
1093     strongarm_uart_update_int_status(s);
1094 }
1095
1096 static void strongarm_uart_event(void *opaque, QEMUChrEvent event)
1097 {
1098     StrongARMUARTState *s = opaque;
1099     if (event == CHR_EVENT_BREAK) {
1100         s->utsr0 |= UTSR0_RBB;
1101         strongarm_uart_rx_push(s, RX_FIFO_FRE);
1102         s->wait_break_end = true;
1103         strongarm_uart_update_status(s);
1104         strongarm_uart_update_int_status(s);
1105     }
1106 }
1107
1108 static void strongarm_uart_tx(void *opaque)
1109 {
1110     StrongARMUARTState *s = opaque;
1111     uint64_t new_xmit_ts = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
1112
1113     if (s->utcr3 & UTCR3_LBM) /* loopback */ {
1114         strongarm_uart_receive(s, &s->tx_fifo[s->tx_start], 1);
1115     } else if (qemu_chr_fe_backend_connected(&s->chr)) {
1116         /* XXX this blocks entire thread. Rewrite to use
1117          * qemu_chr_fe_write and background I/O callbacks */
1118         qemu_chr_fe_write_all(&s->chr, &s->tx_fifo[s->tx_start], 1);
1119     }
1120
1121     s->tx_start = (s->tx_start + 1) % 8;
1122     s->tx_len--;
1123     if (s->tx_len) {
1124         timer_mod(s->tx_timer, new_xmit_ts + s->char_transmit_time);
1125     }
1126     strongarm_uart_update_status(s);
1127     strongarm_uart_update_int_status(s);
1128 }
1129
1130 static uint64_t strongarm_uart_read(void *opaque, hwaddr addr,
1131                                     unsigned size)
1132 {
1133     StrongARMUARTState *s = opaque;
1134     uint16_t ret;
1135
1136     switch (addr) {
1137     case UTCR0:
1138         return s->utcr0;
1139
1140     case UTCR1:
1141         return s->brd >> 8;
1142
1143     case UTCR2:
1144         return s->brd & 0xff;
1145
1146     case UTCR3:
1147         return s->utcr3;
1148
1149     case UTDR:
1150         if (s->rx_len != 0) {
1151             ret = s->rx_fifo[s->rx_start];
1152             s->rx_start = (s->rx_start + 1) % 12;
1153             s->rx_len--;
1154             strongarm_uart_update_status(s);
1155             strongarm_uart_update_int_status(s);
1156             return ret;
1157         }
1158         return 0;
1159
1160     case UTSR0:
1161         return s->utsr0;
1162
1163     case UTSR1:
1164         return s->utsr1;
1165
1166     default:
1167         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
1168         return 0;
1169     }
1170 }
1171
1172 static void strongarm_uart_write(void *opaque, hwaddr addr,
1173                                  uint64_t value, unsigned size)
1174 {
1175     StrongARMUARTState *s = opaque;
1176
1177     switch (addr) {
1178     case UTCR0:
1179         s->utcr0 = value & 0x7f;
1180         strongarm_uart_update_parameters(s);
1181         break;
1182
1183     case UTCR1:
1184         s->brd = (s->brd & 0xff) | ((value & 0xf) << 8);
1185         strongarm_uart_update_parameters(s);
1186         break;
1187
1188     case UTCR2:
1189         s->brd = (s->brd & 0xf00) | (value & 0xff);
1190         strongarm_uart_update_parameters(s);
1191         break;
1192
1193     case UTCR3:
1194         s->utcr3 = value & 0x3f;
1195         if ((s->utcr3 & UTCR3_RXE) == 0) {
1196             s->rx_len = 0;
1197         }
1198         if ((s->utcr3 & UTCR3_TXE) == 0) {
1199             s->tx_len = 0;
1200         }
1201         strongarm_uart_update_status(s);
1202         strongarm_uart_update_int_status(s);
1203         break;
1204
1205     case UTDR:
1206         if ((s->utcr3 & UTCR3_TXE) && s->tx_len != 8) {
1207             s->tx_fifo[(s->tx_start + s->tx_len) % 8] = value;
1208             s->tx_len++;
1209             strongarm_uart_update_status(s);
1210             strongarm_uart_update_int_status(s);
1211             if (s->tx_len == 1) {
1212                 strongarm_uart_tx(s);
1213             }
1214         }
1215         break;
1216
1217     case UTSR0:
1218         s->utsr0 = s->utsr0 & ~(value &
1219                 (UTSR0_REB | UTSR0_RBB | UTSR0_RID));
1220         strongarm_uart_update_int_status(s);
1221         break;
1222
1223     default:
1224         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
1225     }
1226 }
1227
1228 static const MemoryRegionOps strongarm_uart_ops = {
1229     .read = strongarm_uart_read,
1230     .write = strongarm_uart_write,
1231     .endianness = DEVICE_NATIVE_ENDIAN,
1232 };
1233
1234 static void strongarm_uart_init(Object *obj)
1235 {
1236     StrongARMUARTState *s = STRONGARM_UART(obj);
1237     SysBusDevice *dev = SYS_BUS_DEVICE(obj);
1238
1239     memory_region_init_io(&s->iomem, obj, &strongarm_uart_ops, s,
1240                           "uart", 0x10000);
1241     sysbus_init_mmio(dev, &s->iomem);
1242     sysbus_init_irq(dev, &s->irq);
1243 }
1244
1245 static void strongarm_uart_realize(DeviceState *dev, Error **errp)
1246 {
1247     StrongARMUARTState *s = STRONGARM_UART(dev);
1248
1249     s->rx_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
1250                                        strongarm_uart_rx_to,
1251                                        s);
1252     s->tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_tx, s);
1253     qemu_chr_fe_set_handlers(&s->chr,
1254                              strongarm_uart_can_receive,
1255                              strongarm_uart_receive,
1256                              strongarm_uart_event,
1257                              NULL, s, NULL, true);
1258 }
1259
1260 static void strongarm_uart_reset(DeviceState *dev)
1261 {
1262     StrongARMUARTState *s = STRONGARM_UART(dev);
1263
1264     s->utcr0 = UTCR0_DSS; /* 8 data, no parity */
1265     s->brd = 23;    /* 9600 */
1266     /* enable send & recv - this actually violates spec */
1267     s->utcr3 = UTCR3_TXE | UTCR3_RXE;
1268
1269     s->rx_len = s->tx_len = 0;
1270
1271     strongarm_uart_update_parameters(s);
1272     strongarm_uart_update_status(s);
1273     strongarm_uart_update_int_status(s);
1274 }
1275
1276 static int strongarm_uart_post_load(void *opaque, int version_id)
1277 {
1278     StrongARMUARTState *s = opaque;
1279
1280     strongarm_uart_update_parameters(s);
1281     strongarm_uart_update_status(s);
1282     strongarm_uart_update_int_status(s);
1283
1284     /* tx and restart timer */
1285     if (s->tx_len) {
1286         strongarm_uart_tx(s);
1287     }
1288
1289     /* restart rx timeout timer */
1290     if (s->rx_len) {
1291         timer_mod(s->rx_timeout_timer,
1292                 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 3);
1293     }
1294
1295     return 0;
1296 }
1297
1298 static const VMStateDescription vmstate_strongarm_uart_regs = {
1299     .name = "strongarm-uart",
1300     .version_id = 0,
1301     .minimum_version_id = 0,
1302     .post_load = strongarm_uart_post_load,
1303     .fields = (VMStateField[]) {
1304         VMSTATE_UINT8(utcr0, StrongARMUARTState),
1305         VMSTATE_UINT16(brd, StrongARMUARTState),
1306         VMSTATE_UINT8(utcr3, StrongARMUARTState),
1307         VMSTATE_UINT8(utsr0, StrongARMUARTState),
1308         VMSTATE_UINT8_ARRAY(tx_fifo, StrongARMUARTState, 8),
1309         VMSTATE_UINT8(tx_start, StrongARMUARTState),
1310         VMSTATE_UINT8(tx_len, StrongARMUARTState),
1311         VMSTATE_UINT16_ARRAY(rx_fifo, StrongARMUARTState, 12),
1312         VMSTATE_UINT8(rx_start, StrongARMUARTState),
1313         VMSTATE_UINT8(rx_len, StrongARMUARTState),
1314         VMSTATE_BOOL(wait_break_end, StrongARMUARTState),
1315         VMSTATE_END_OF_LIST(),
1316     },
1317 };
1318
1319 static Property strongarm_uart_properties[] = {
1320     DEFINE_PROP_CHR("chardev", StrongARMUARTState, chr),
1321     DEFINE_PROP_END_OF_LIST(),
1322 };
1323
1324 static void strongarm_uart_class_init(ObjectClass *klass, void *data)
1325 {
1326     DeviceClass *dc = DEVICE_CLASS(klass);
1327
1328     dc->desc = "StrongARM UART controller";
1329     dc->reset = strongarm_uart_reset;
1330     dc->vmsd = &vmstate_strongarm_uart_regs;
1331     device_class_set_props(dc, strongarm_uart_properties);
1332     dc->realize = strongarm_uart_realize;
1333 }
1334
1335 static const TypeInfo strongarm_uart_info = {
1336     .name          = TYPE_STRONGARM_UART,
1337     .parent        = TYPE_SYS_BUS_DEVICE,
1338     .instance_size = sizeof(StrongARMUARTState),
1339     .instance_init = strongarm_uart_init,
1340     .class_init    = strongarm_uart_class_init,
1341 };
1342
1343 /* Synchronous Serial Ports */
1344
1345 #define TYPE_STRONGARM_SSP "strongarm-ssp"
1346 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMSSPState, STRONGARM_SSP)
1347
1348 struct StrongARMSSPState {
1349     SysBusDevice parent_obj;
1350
1351     MemoryRegion iomem;
1352     qemu_irq irq;
1353     SSIBus *bus;
1354
1355     uint16_t sscr[2];
1356     uint16_t sssr;
1357
1358     uint16_t rx_fifo[8];
1359     uint8_t rx_level;
1360     uint8_t rx_start;
1361 };
1362
1363 #define SSCR0 0x60 /* SSP Control register 0 */
1364 #define SSCR1 0x64 /* SSP Control register 1 */
1365 #define SSDR  0x6c /* SSP Data register */
1366 #define SSSR  0x74 /* SSP Status register */
1367
1368 /* Bitfields for above registers */
1369 #define SSCR0_SPI(x)    (((x) & 0x30) == 0x00)
1370 #define SSCR0_SSP(x)    (((x) & 0x30) == 0x10)
1371 #define SSCR0_UWIRE(x)  (((x) & 0x30) == 0x20)
1372 #define SSCR0_PSP(x)    (((x) & 0x30) == 0x30)
1373 #define SSCR0_SSE       (1 << 7)
1374 #define SSCR0_DSS(x)    (((x) & 0xf) + 1)
1375 #define SSCR1_RIE       (1 << 0)
1376 #define SSCR1_TIE       (1 << 1)
1377 #define SSCR1_LBM       (1 << 2)
1378 #define SSSR_TNF        (1 << 2)
1379 #define SSSR_RNE        (1 << 3)
1380 #define SSSR_TFS        (1 << 5)
1381 #define SSSR_RFS        (1 << 6)
1382 #define SSSR_ROR        (1 << 7)
1383 #define SSSR_RW         0x0080
1384
1385 static void strongarm_ssp_int_update(StrongARMSSPState *s)
1386 {
1387     int level = 0;
1388
1389     level |= (s->sssr & SSSR_ROR);
1390     level |= (s->sssr & SSSR_RFS)  &&  (s->sscr[1] & SSCR1_RIE);
1391     level |= (s->sssr & SSSR_TFS)  &&  (s->sscr[1] & SSCR1_TIE);
1392     qemu_set_irq(s->irq, level);
1393 }
1394
1395 static void strongarm_ssp_fifo_update(StrongARMSSPState *s)
1396 {
1397     s->sssr &= ~SSSR_TFS;
1398     s->sssr &= ~SSSR_TNF;
1399     if (s->sscr[0] & SSCR0_SSE) {
1400         if (s->rx_level >= 4) {
1401             s->sssr |= SSSR_RFS;
1402         } else {
1403             s->sssr &= ~SSSR_RFS;
1404         }
1405         if (s->rx_level) {
1406             s->sssr |= SSSR_RNE;
1407         } else {
1408             s->sssr &= ~SSSR_RNE;
1409         }
1410         /* TX FIFO is never filled, so it is always in underrun
1411            condition if SSP is enabled */
1412         s->sssr |= SSSR_TFS;
1413         s->sssr |= SSSR_TNF;
1414     }
1415
1416     strongarm_ssp_int_update(s);
1417 }
1418
1419 static uint64_t strongarm_ssp_read(void *opaque, hwaddr addr,
1420                                    unsigned size)
1421 {
1422     StrongARMSSPState *s = opaque;
1423     uint32_t retval;
1424
1425     switch (addr) {
1426     case SSCR0:
1427         return s->sscr[0];
1428     case SSCR1:
1429         return s->sscr[1];
1430     case SSSR:
1431         return s->sssr;
1432     case SSDR:
1433         if (~s->sscr[0] & SSCR0_SSE) {
1434             return 0xffffffff;
1435         }
1436         if (s->rx_level < 1) {
1437             printf("%s: SSP Rx Underrun\n", __func__);
1438             return 0xffffffff;
1439         }
1440         s->rx_level--;
1441         retval = s->rx_fifo[s->rx_start++];
1442         s->rx_start &= 0x7;
1443         strongarm_ssp_fifo_update(s);
1444         return retval;
1445     default:
1446         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
1447         break;
1448     }
1449     return 0;
1450 }
1451
1452 static void strongarm_ssp_write(void *opaque, hwaddr addr,
1453                                 uint64_t value, unsigned size)
1454 {
1455     StrongARMSSPState *s = opaque;
1456
1457     switch (addr) {
1458     case SSCR0:
1459         s->sscr[0] = value & 0xffbf;
1460         if ((s->sscr[0] & SSCR0_SSE) && SSCR0_DSS(value) < 4) {
1461             printf("%s: Wrong data size: %i bits\n", __func__,
1462                    (int)SSCR0_DSS(value));
1463         }
1464         if (!(value & SSCR0_SSE)) {
1465             s->sssr = 0;
1466             s->rx_level = 0;
1467         }
1468         strongarm_ssp_fifo_update(s);
1469         break;
1470
1471     case SSCR1:
1472         s->sscr[1] = value & 0x2f;
1473         if (value & SSCR1_LBM) {
1474             printf("%s: Attempt to use SSP LBM mode\n", __func__);
1475         }
1476         strongarm_ssp_fifo_update(s);
1477         break;
1478
1479     case SSSR:
1480         s->sssr &= ~(value & SSSR_RW);
1481         strongarm_ssp_int_update(s);
1482         break;
1483
1484     case SSDR:
1485         if (SSCR0_UWIRE(s->sscr[0])) {
1486             value &= 0xff;
1487         } else
1488             /* Note how 32bits overflow does no harm here */
1489             value &= (1 << SSCR0_DSS(s->sscr[0])) - 1;
1490
1491         /* Data goes from here to the Tx FIFO and is shifted out from
1492          * there directly to the slave, no need to buffer it.
1493          */
1494         if (s->sscr[0] & SSCR0_SSE) {
1495             uint32_t readval;
1496             if (s->sscr[1] & SSCR1_LBM) {
1497                 readval = value;
1498             } else {
1499                 readval = ssi_transfer(s->bus, value);
1500             }
1501
1502             if (s->rx_level < 0x08) {
1503                 s->rx_fifo[(s->rx_start + s->rx_level++) & 0x7] = readval;
1504             } else {
1505                 s->sssr |= SSSR_ROR;
1506             }
1507         }
1508         strongarm_ssp_fifo_update(s);
1509         break;
1510
1511     default:
1512         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
1513         break;
1514     }
1515 }
1516
1517 static const MemoryRegionOps strongarm_ssp_ops = {
1518     .read = strongarm_ssp_read,
1519     .write = strongarm_ssp_write,
1520     .endianness = DEVICE_NATIVE_ENDIAN,
1521 };
1522
1523 static int strongarm_ssp_post_load(void *opaque, int version_id)
1524 {
1525     StrongARMSSPState *s = opaque;
1526
1527     strongarm_ssp_fifo_update(s);
1528
1529     return 0;
1530 }
1531
1532 static void strongarm_ssp_init(Object *obj)
1533 {
1534     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
1535     DeviceState *dev = DEVICE(sbd);
1536     StrongARMSSPState *s = STRONGARM_SSP(dev);
1537
1538     sysbus_init_irq(sbd, &s->irq);
1539
1540     memory_region_init_io(&s->iomem, obj, &strongarm_ssp_ops, s,
1541                           "ssp", 0x1000);
1542     sysbus_init_mmio(sbd, &s->iomem);
1543
1544     s->bus = ssi_create_bus(dev, "ssi");
1545 }
1546
1547 static void strongarm_ssp_reset(DeviceState *dev)
1548 {
1549     StrongARMSSPState *s = STRONGARM_SSP(dev);
1550
1551     s->sssr = 0x03; /* 3 bit data, SPI, disabled */
1552     s->rx_start = 0;
1553     s->rx_level = 0;
1554 }
1555
1556 static const VMStateDescription vmstate_strongarm_ssp_regs = {
1557     .name = "strongarm-ssp",
1558     .version_id = 0,
1559     .minimum_version_id = 0,
1560     .post_load = strongarm_ssp_post_load,
1561     .fields = (VMStateField[]) {
1562         VMSTATE_UINT16_ARRAY(sscr, StrongARMSSPState, 2),
1563         VMSTATE_UINT16(sssr, StrongARMSSPState),
1564         VMSTATE_UINT16_ARRAY(rx_fifo, StrongARMSSPState, 8),
1565         VMSTATE_UINT8(rx_start, StrongARMSSPState),
1566         VMSTATE_UINT8(rx_level, StrongARMSSPState),
1567         VMSTATE_END_OF_LIST(),
1568     },
1569 };
1570
1571 static void strongarm_ssp_class_init(ObjectClass *klass, void *data)
1572 {
1573     DeviceClass *dc = DEVICE_CLASS(klass);
1574
1575     dc->desc = "StrongARM SSP controller";
1576     dc->reset = strongarm_ssp_reset;
1577     dc->vmsd = &vmstate_strongarm_ssp_regs;
1578 }
1579
1580 static const TypeInfo strongarm_ssp_info = {
1581     .name          = TYPE_STRONGARM_SSP,
1582     .parent        = TYPE_SYS_BUS_DEVICE,
1583     .instance_size = sizeof(StrongARMSSPState),
1584     .instance_init = strongarm_ssp_init,
1585     .class_init    = strongarm_ssp_class_init,
1586 };
1587
1588 /* Main CPU functions */
1589 StrongARMState *sa1110_init(const char *cpu_type)
1590 {
1591     StrongARMState *s;
1592     int i;
1593
1594     s = g_new0(StrongARMState, 1);
1595
1596     if (strncmp(cpu_type, "sa1110", 6)) {
1597         error_report("Machine requires a SA1110 processor.");
1598         exit(1);
1599     }
1600
1601     s->cpu = ARM_CPU(cpu_create(cpu_type));
1602
1603     s->pic = sysbus_create_varargs("strongarm_pic", 0x90050000,
1604                     qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ),
1605                     qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ),
1606                     NULL);
1607
1608     sysbus_create_varargs("pxa25x-timer", 0x90000000,
1609                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC0),
1610                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC1),
1611                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC2),
1612                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC3),
1613                     NULL);
1614
1615     sysbus_create_simple(TYPE_STRONGARM_RTC, 0x90010000,
1616                     qdev_get_gpio_in(s->pic, SA_PIC_RTC_ALARM));
1617
1618     s->gpio = strongarm_gpio_init(0x90040000, s->pic);
1619
1620     s->ppc = sysbus_create_varargs(TYPE_STRONGARM_PPC, 0x90060000, NULL);
1621
1622     for (i = 0; sa_serial[i].io_base; i++) {
1623         DeviceState *dev = qdev_new(TYPE_STRONGARM_UART);
1624         qdev_prop_set_chr(dev, "chardev", serial_hd(i));
1625         sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
1626         sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0,
1627                 sa_serial[i].io_base);
1628         sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
1629                 qdev_get_gpio_in(s->pic, sa_serial[i].irq));
1630     }
1631
1632     s->ssp = sysbus_create_varargs(TYPE_STRONGARM_SSP, 0x80070000,
1633                 qdev_get_gpio_in(s->pic, SA_PIC_SSP), NULL);
1634     s->ssp_bus = (SSIBus *)qdev_get_child_bus(s->ssp, "ssi");
1635
1636     return s;
1637 }
1638
1639 static void strongarm_register_types(void)
1640 {
1641     type_register_static(&strongarm_pic_info);
1642     type_register_static(&strongarm_rtc_sysbus_info);
1643     type_register_static(&strongarm_gpio_info);
1644     type_register_static(&strongarm_ppc_info);
1645     type_register_static(&strongarm_uart_info);
1646     type_register_static(&strongarm_ssp_info);
1647 }
1648
1649 type_init(strongarm_register_types)