4 * Copyright IBM, Corp. 2008
7 * Anthony Liguori <aliguori@us.ibm.com>
9 * This work is licensed under the terms of the GNU GPL, version 2. See
10 * the COPYING file in the top-level directory.
12 * Contributions after 2012-01-13 are licensed under the terms of the
13 * GNU GPL, version 2 or (at your option) any later version.
16 #include "qemu/osdep.h"
17 #include "qemu/cutils.h"
18 #include "qemu/error-report.h"
19 #include "qemu/main-loop.h"
20 #include "migration/migration.h"
21 #include "migration/qemu-file.h"
22 #include "sysemu/sysemu.h"
23 #include "block/block.h"
24 #include "qapi/qmp/qerror.h"
25 #include "qapi/util.h"
26 #include "qemu/sockets.h"
28 #include "migration/block.h"
29 #include "migration/postcopy-ram.h"
30 #include "qemu/thread.h"
31 #include "qmp-commands.h"
33 #include "qapi-event.h"
35 #include "exec/memory.h"
36 #include "exec/address-spaces.h"
37 #include "io/channel-buffer.h"
38 #include "io/channel-tls.h"
39 #include "migration/colo.h"
41 #define MAX_THROTTLE (32 << 20) /* Migration transfer speed throttling */
43 /* Amount of time to allocate to each "chunk" of bandwidth-throttled
45 #define BUFFER_DELAY 100
46 #define XFER_LIMIT_RATIO (1000 / BUFFER_DELAY)
48 /* Time in milliseconds we are allowed to stop the source,
49 * for sending the last part */
50 #define DEFAULT_MIGRATE_SET_DOWNTIME 300
52 /* Default compression thread count */
53 #define DEFAULT_MIGRATE_COMPRESS_THREAD_COUNT 8
54 /* Default decompression thread count, usually decompression is at
55 * least 4 times as fast as compression.*/
56 #define DEFAULT_MIGRATE_DECOMPRESS_THREAD_COUNT 2
57 /*0: means nocompress, 1: best speed, ... 9: best compress ratio */
58 #define DEFAULT_MIGRATE_COMPRESS_LEVEL 1
59 /* Define default autoconverge cpu throttle migration parameters */
60 #define DEFAULT_MIGRATE_CPU_THROTTLE_INITIAL 20
61 #define DEFAULT_MIGRATE_CPU_THROTTLE_INCREMENT 10
63 /* Migration XBZRLE default cache size */
64 #define DEFAULT_MIGRATE_CACHE_SIZE (64 * 1024 * 1024)
66 /* The delay time (in ms) between two COLO checkpoints
67 * Note: Please change this default value to 10000 when we support hybrid mode.
69 #define DEFAULT_MIGRATE_X_CHECKPOINT_DELAY 200
71 static NotifierList migration_state_notifiers
=
72 NOTIFIER_LIST_INITIALIZER(migration_state_notifiers
);
74 static bool deferred_incoming
;
77 * Current state of incoming postcopy; note this is not part of
78 * MigrationIncomingState since it's state is used during cleanup
79 * at the end as MIS is being freed.
81 static PostcopyState incoming_postcopy_state
;
83 /* When we add fault tolerance, we could have several
84 migrations at once. For now we don't need to add
85 dynamic creation of migration */
88 MigrationState
*migrate_get_current(void)
91 static MigrationState current_migration
= {
92 .state
= MIGRATION_STATUS_NONE
,
93 .xbzrle_cache_size
= DEFAULT_MIGRATE_CACHE_SIZE
,
96 .compress_level
= DEFAULT_MIGRATE_COMPRESS_LEVEL
,
97 .compress_threads
= DEFAULT_MIGRATE_COMPRESS_THREAD_COUNT
,
98 .decompress_threads
= DEFAULT_MIGRATE_DECOMPRESS_THREAD_COUNT
,
99 .cpu_throttle_initial
= DEFAULT_MIGRATE_CPU_THROTTLE_INITIAL
,
100 .cpu_throttle_increment
= DEFAULT_MIGRATE_CPU_THROTTLE_INCREMENT
,
101 .max_bandwidth
= MAX_THROTTLE
,
102 .downtime_limit
= DEFAULT_MIGRATE_SET_DOWNTIME
,
103 .x_checkpoint_delay
= DEFAULT_MIGRATE_X_CHECKPOINT_DELAY
,
108 qemu_mutex_init(¤t_migration
.src_page_req_mutex
);
111 return ¤t_migration
;
115 static MigrationIncomingState
*mis_current
;
117 MigrationIncomingState
*migration_incoming_get_current(void)
122 MigrationIncomingState
*migration_incoming_state_new(QEMUFile
* f
)
124 mis_current
= g_new0(MigrationIncomingState
, 1);
125 mis_current
->from_src_file
= f
;
126 mis_current
->state
= MIGRATION_STATUS_NONE
;
127 QLIST_INIT(&mis_current
->loadvm_handlers
);
128 qemu_mutex_init(&mis_current
->rp_mutex
);
129 qemu_event_init(&mis_current
->main_thread_load_event
, false);
134 void migration_incoming_state_destroy(void)
136 qemu_event_destroy(&mis_current
->main_thread_load_event
);
137 loadvm_free_handlers(mis_current
);
146 uint8_t runstate
[100];
151 static GlobalState global_state
;
153 int global_state_store(void)
155 if (!runstate_store((char *)global_state
.runstate
,
156 sizeof(global_state
.runstate
))) {
157 error_report("runstate name too big: %s", global_state
.runstate
);
158 trace_migrate_state_too_big();
164 void global_state_store_running(void)
166 const char *state
= RunState_lookup
[RUN_STATE_RUNNING
];
167 strncpy((char *)global_state
.runstate
,
168 state
, sizeof(global_state
.runstate
));
171 static bool global_state_received(void)
173 return global_state
.received
;
176 static RunState
global_state_get_runstate(void)
178 return global_state
.state
;
181 void global_state_set_optional(void)
183 global_state
.optional
= true;
186 static bool global_state_needed(void *opaque
)
188 GlobalState
*s
= opaque
;
189 char *runstate
= (char *)s
->runstate
;
191 /* If it is not optional, it is mandatory */
193 if (s
->optional
== false) {
197 /* If state is running or paused, it is not needed */
199 if (strcmp(runstate
, "running") == 0 ||
200 strcmp(runstate
, "paused") == 0) {
204 /* for any other state it is needed */
208 static int global_state_post_load(void *opaque
, int version_id
)
210 GlobalState
*s
= opaque
;
211 Error
*local_err
= NULL
;
213 char *runstate
= (char *)s
->runstate
;
216 trace_migrate_global_state_post_load(runstate
);
218 r
= qapi_enum_parse(RunState_lookup
, runstate
, RUN_STATE__MAX
,
223 error_report_err(local_err
);
232 static void global_state_pre_save(void *opaque
)
234 GlobalState
*s
= opaque
;
236 trace_migrate_global_state_pre_save((char *)s
->runstate
);
237 s
->size
= strlen((char *)s
->runstate
) + 1;
240 static const VMStateDescription vmstate_globalstate
= {
241 .name
= "globalstate",
243 .minimum_version_id
= 1,
244 .post_load
= global_state_post_load
,
245 .pre_save
= global_state_pre_save
,
246 .needed
= global_state_needed
,
247 .fields
= (VMStateField
[]) {
248 VMSTATE_UINT32(size
, GlobalState
),
249 VMSTATE_BUFFER(runstate
, GlobalState
),
250 VMSTATE_END_OF_LIST()
254 void register_global_state(void)
256 /* We would use it independently that we receive it */
257 strcpy((char *)&global_state
.runstate
, "");
258 global_state
.received
= false;
259 vmstate_register(NULL
, 0, &vmstate_globalstate
, &global_state
);
262 static void migrate_generate_event(int new_state
)
264 if (migrate_use_events()) {
265 qapi_event_send_migration(new_state
, &error_abort
);
270 * Called on -incoming with a defer: uri.
271 * The migration can be started later after any parameters have been
274 static void deferred_incoming_migration(Error
**errp
)
276 if (deferred_incoming
) {
277 error_setg(errp
, "Incoming migration already deferred");
279 deferred_incoming
= true;
282 /* Request a range of pages from the source VM at the given
284 * rbname: Name of the RAMBlock to request the page in, if NULL it's the same
285 * as the last request (a name must have been given previously)
286 * Start: Address offset within the RB
287 * Len: Length in bytes required - must be a multiple of pagesize
289 void migrate_send_rp_req_pages(MigrationIncomingState
*mis
, const char *rbname
,
290 ram_addr_t start
, size_t len
)
292 uint8_t bufc
[12 + 1 + 255]; /* start (8), len (4), rbname up to 256 */
293 size_t msglen
= 12; /* start + len */
295 *(uint64_t *)bufc
= cpu_to_be64((uint64_t)start
);
296 *(uint32_t *)(bufc
+ 8) = cpu_to_be32((uint32_t)len
);
299 int rbname_len
= strlen(rbname
);
300 assert(rbname_len
< 256);
302 bufc
[msglen
++] = rbname_len
;
303 memcpy(bufc
+ msglen
, rbname
, rbname_len
);
304 msglen
+= rbname_len
;
305 migrate_send_rp_message(mis
, MIG_RP_MSG_REQ_PAGES_ID
, msglen
, bufc
);
307 migrate_send_rp_message(mis
, MIG_RP_MSG_REQ_PAGES
, msglen
, bufc
);
311 void qemu_start_incoming_migration(const char *uri
, Error
**errp
)
315 qapi_event_send_migration(MIGRATION_STATUS_SETUP
, &error_abort
);
316 if (!strcmp(uri
, "defer")) {
317 deferred_incoming_migration(errp
);
318 } else if (strstart(uri
, "tcp:", &p
)) {
319 tcp_start_incoming_migration(p
, errp
);
321 } else if (strstart(uri
, "rdma:", &p
)) {
322 rdma_start_incoming_migration(p
, errp
);
324 } else if (strstart(uri
, "exec:", &p
)) {
325 exec_start_incoming_migration(p
, errp
);
326 } else if (strstart(uri
, "unix:", &p
)) {
327 unix_start_incoming_migration(p
, errp
);
328 } else if (strstart(uri
, "fd:", &p
)) {
329 fd_start_incoming_migration(p
, errp
);
331 error_setg(errp
, "unknown migration protocol: %s", uri
);
335 static void process_incoming_migration_bh(void *opaque
)
337 Error
*local_err
= NULL
;
338 MigrationIncomingState
*mis
= opaque
;
340 /* Make sure all file formats flush their mutable metadata */
341 bdrv_invalidate_cache_all(&local_err
);
343 migrate_set_state(&mis
->state
, MIGRATION_STATUS_ACTIVE
,
344 MIGRATION_STATUS_FAILED
);
345 error_report_err(local_err
);
346 migrate_decompress_threads_join();
351 * This must happen after all error conditions are dealt with and
352 * we're sure the VM is going to be running on this host.
354 qemu_announce_self();
356 /* If global state section was not received or we are in running
357 state, we need to obey autostart. Any other state is set with
360 if (!global_state_received() ||
361 global_state_get_runstate() == RUN_STATE_RUNNING
) {
365 runstate_set(RUN_STATE_PAUSED
);
368 runstate_set(global_state_get_runstate());
370 migrate_decompress_threads_join();
372 * This must happen after any state changes since as soon as an external
373 * observer sees this event they might start to prod at the VM assuming
376 migrate_set_state(&mis
->state
, MIGRATION_STATUS_ACTIVE
,
377 MIGRATION_STATUS_COMPLETED
);
378 qemu_bh_delete(mis
->bh
);
379 migration_incoming_state_destroy();
382 static void process_incoming_migration_co(void *opaque
)
384 QEMUFile
*f
= opaque
;
385 MigrationIncomingState
*mis
;
389 mis
= migration_incoming_state_new(f
);
390 postcopy_state_set(POSTCOPY_INCOMING_NONE
);
391 migrate_set_state(&mis
->state
, MIGRATION_STATUS_NONE
,
392 MIGRATION_STATUS_ACTIVE
);
393 ret
= qemu_loadvm_state(f
);
395 ps
= postcopy_state_get();
396 trace_process_incoming_migration_co_end(ret
, ps
);
397 if (ps
!= POSTCOPY_INCOMING_NONE
) {
398 if (ps
== POSTCOPY_INCOMING_ADVISE
) {
400 * Where a migration had postcopy enabled (and thus went to advise)
401 * but managed to complete within the precopy period, we can use
404 postcopy_ram_incoming_cleanup(mis
);
405 } else if (ret
>= 0) {
407 * Postcopy was started, cleanup should happen at the end of the
410 trace_process_incoming_migration_co_postcopy_end_main();
413 /* Else if something went wrong then just fall out of the normal exit */
416 /* we get COLO info, and know if we are in COLO mode */
417 if (!ret
&& migration_incoming_enable_colo()) {
418 mis
->migration_incoming_co
= qemu_coroutine_self();
419 qemu_thread_create(&mis
->colo_incoming_thread
, "COLO incoming",
420 colo_process_incoming_thread
, mis
, QEMU_THREAD_JOINABLE
);
421 mis
->have_colo_incoming_thread
= true;
422 qemu_coroutine_yield();
424 /* Wait checkpoint incoming thread exit before free resource */
425 qemu_thread_join(&mis
->colo_incoming_thread
);
429 free_xbzrle_decoded_buf();
432 migrate_set_state(&mis
->state
, MIGRATION_STATUS_ACTIVE
,
433 MIGRATION_STATUS_FAILED
);
434 error_report("load of migration failed: %s", strerror(-ret
));
435 migrate_decompress_threads_join();
439 mis
->bh
= qemu_bh_new(process_incoming_migration_bh
, mis
);
440 qemu_bh_schedule(mis
->bh
);
443 void migration_fd_process_incoming(QEMUFile
*f
)
445 Coroutine
*co
= qemu_coroutine_create(process_incoming_migration_co
, f
);
447 migrate_decompress_threads_create();
448 qemu_file_set_blocking(f
, false);
449 qemu_coroutine_enter(co
);
453 void migration_channel_process_incoming(MigrationState
*s
,
456 trace_migration_set_incoming_channel(
457 ioc
, object_get_typename(OBJECT(ioc
)));
459 if (s
->parameters
.tls_creds
&&
460 !object_dynamic_cast(OBJECT(ioc
),
461 TYPE_QIO_CHANNEL_TLS
)) {
462 Error
*local_err
= NULL
;
463 migration_tls_channel_process_incoming(s
, ioc
, &local_err
);
465 error_report_err(local_err
);
468 QEMUFile
*f
= qemu_fopen_channel_input(ioc
);
469 migration_fd_process_incoming(f
);
474 void migration_channel_connect(MigrationState
*s
,
476 const char *hostname
)
478 trace_migration_set_outgoing_channel(
479 ioc
, object_get_typename(OBJECT(ioc
)), hostname
);
481 if (s
->parameters
.tls_creds
&&
482 !object_dynamic_cast(OBJECT(ioc
),
483 TYPE_QIO_CHANNEL_TLS
)) {
484 Error
*local_err
= NULL
;
485 migration_tls_channel_connect(s
, ioc
, hostname
, &local_err
);
487 migrate_fd_error(s
, local_err
);
488 error_free(local_err
);
491 QEMUFile
*f
= qemu_fopen_channel_output(ioc
);
495 migrate_fd_connect(s
);
501 * Send a message on the return channel back to the source
504 void migrate_send_rp_message(MigrationIncomingState
*mis
,
505 enum mig_rp_message_type message_type
,
506 uint16_t len
, void *data
)
508 trace_migrate_send_rp_message((int)message_type
, len
);
509 qemu_mutex_lock(&mis
->rp_mutex
);
510 qemu_put_be16(mis
->to_src_file
, (unsigned int)message_type
);
511 qemu_put_be16(mis
->to_src_file
, len
);
512 qemu_put_buffer(mis
->to_src_file
, data
, len
);
513 qemu_fflush(mis
->to_src_file
);
514 qemu_mutex_unlock(&mis
->rp_mutex
);
518 * Send a 'SHUT' message on the return channel with the given value
519 * to indicate that we've finished with the RP. Non-0 value indicates
522 void migrate_send_rp_shut(MigrationIncomingState
*mis
,
527 buf
= cpu_to_be32(value
);
528 migrate_send_rp_message(mis
, MIG_RP_MSG_SHUT
, sizeof(buf
), &buf
);
532 * Send a 'PONG' message on the return channel with the given value
533 * (normally in response to a 'PING')
535 void migrate_send_rp_pong(MigrationIncomingState
*mis
,
540 buf
= cpu_to_be32(value
);
541 migrate_send_rp_message(mis
, MIG_RP_MSG_PONG
, sizeof(buf
), &buf
);
544 MigrationCapabilityStatusList
*qmp_query_migrate_capabilities(Error
**errp
)
546 MigrationCapabilityStatusList
*head
= NULL
;
547 MigrationCapabilityStatusList
*caps
;
548 MigrationState
*s
= migrate_get_current();
551 caps
= NULL
; /* silence compiler warning */
552 for (i
= 0; i
< MIGRATION_CAPABILITY__MAX
; i
++) {
553 if (i
== MIGRATION_CAPABILITY_X_COLO
&& !colo_supported()) {
557 head
= g_malloc0(sizeof(*caps
));
560 caps
->next
= g_malloc0(sizeof(*caps
));
564 g_malloc(sizeof(*caps
->value
));
565 caps
->value
->capability
= i
;
566 caps
->value
->state
= s
->enabled_capabilities
[i
];
572 MigrationParameters
*qmp_query_migrate_parameters(Error
**errp
)
574 MigrationParameters
*params
;
575 MigrationState
*s
= migrate_get_current();
577 params
= g_malloc0(sizeof(*params
));
578 params
->has_compress_level
= true;
579 params
->compress_level
= s
->parameters
.compress_level
;
580 params
->has_compress_threads
= true;
581 params
->compress_threads
= s
->parameters
.compress_threads
;
582 params
->has_decompress_threads
= true;
583 params
->decompress_threads
= s
->parameters
.decompress_threads
;
584 params
->has_cpu_throttle_initial
= true;
585 params
->cpu_throttle_initial
= s
->parameters
.cpu_throttle_initial
;
586 params
->has_cpu_throttle_increment
= true;
587 params
->cpu_throttle_increment
= s
->parameters
.cpu_throttle_increment
;
588 params
->has_tls_creds
= !!s
->parameters
.tls_creds
;
589 params
->tls_creds
= g_strdup(s
->parameters
.tls_creds
);
590 params
->has_tls_hostname
= !!s
->parameters
.tls_hostname
;
591 params
->tls_hostname
= g_strdup(s
->parameters
.tls_hostname
);
592 params
->has_max_bandwidth
= true;
593 params
->max_bandwidth
= s
->parameters
.max_bandwidth
;
594 params
->has_downtime_limit
= true;
595 params
->downtime_limit
= s
->parameters
.downtime_limit
;
596 params
->has_x_checkpoint_delay
= true;
597 params
->x_checkpoint_delay
= s
->parameters
.x_checkpoint_delay
;
603 * Return true if we're already in the middle of a migration
604 * (i.e. any of the active or setup states)
606 static bool migration_is_setup_or_active(int state
)
609 case MIGRATION_STATUS_ACTIVE
:
610 case MIGRATION_STATUS_POSTCOPY_ACTIVE
:
611 case MIGRATION_STATUS_SETUP
:
620 static void get_xbzrle_cache_stats(MigrationInfo
*info
)
622 if (migrate_use_xbzrle()) {
623 info
->has_xbzrle_cache
= true;
624 info
->xbzrle_cache
= g_malloc0(sizeof(*info
->xbzrle_cache
));
625 info
->xbzrle_cache
->cache_size
= migrate_xbzrle_cache_size();
626 info
->xbzrle_cache
->bytes
= xbzrle_mig_bytes_transferred();
627 info
->xbzrle_cache
->pages
= xbzrle_mig_pages_transferred();
628 info
->xbzrle_cache
->cache_miss
= xbzrle_mig_pages_cache_miss();
629 info
->xbzrle_cache
->cache_miss_rate
= xbzrle_mig_cache_miss_rate();
630 info
->xbzrle_cache
->overflow
= xbzrle_mig_pages_overflow();
634 static void populate_ram_info(MigrationInfo
*info
, MigrationState
*s
)
636 info
->has_ram
= true;
637 info
->ram
= g_malloc0(sizeof(*info
->ram
));
638 info
->ram
->transferred
= ram_bytes_transferred();
639 info
->ram
->total
= ram_bytes_total();
640 info
->ram
->duplicate
= dup_mig_pages_transferred();
641 info
->ram
->skipped
= skipped_mig_pages_transferred();
642 info
->ram
->normal
= norm_mig_pages_transferred();
643 info
->ram
->normal_bytes
= norm_mig_bytes_transferred();
644 info
->ram
->mbps
= s
->mbps
;
645 info
->ram
->dirty_sync_count
= s
->dirty_sync_count
;
646 info
->ram
->postcopy_requests
= s
->postcopy_requests
;
648 if (s
->state
!= MIGRATION_STATUS_COMPLETED
) {
649 info
->ram
->remaining
= ram_bytes_remaining();
650 info
->ram
->dirty_pages_rate
= s
->dirty_pages_rate
;
654 MigrationInfo
*qmp_query_migrate(Error
**errp
)
656 MigrationInfo
*info
= g_malloc0(sizeof(*info
));
657 MigrationState
*s
= migrate_get_current();
660 case MIGRATION_STATUS_NONE
:
661 /* no migration has happened ever */
663 case MIGRATION_STATUS_SETUP
:
664 info
->has_status
= true;
665 info
->has_total_time
= false;
667 case MIGRATION_STATUS_ACTIVE
:
668 case MIGRATION_STATUS_CANCELLING
:
669 info
->has_status
= true;
670 info
->has_total_time
= true;
671 info
->total_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
)
673 info
->has_expected_downtime
= true;
674 info
->expected_downtime
= s
->expected_downtime
;
675 info
->has_setup_time
= true;
676 info
->setup_time
= s
->setup_time
;
678 populate_ram_info(info
, s
);
680 if (blk_mig_active()) {
681 info
->has_disk
= true;
682 info
->disk
= g_malloc0(sizeof(*info
->disk
));
683 info
->disk
->transferred
= blk_mig_bytes_transferred();
684 info
->disk
->remaining
= blk_mig_bytes_remaining();
685 info
->disk
->total
= blk_mig_bytes_total();
688 if (cpu_throttle_active()) {
689 info
->has_cpu_throttle_percentage
= true;
690 info
->cpu_throttle_percentage
= cpu_throttle_get_percentage();
693 get_xbzrle_cache_stats(info
);
695 case MIGRATION_STATUS_POSTCOPY_ACTIVE
:
696 /* Mostly the same as active; TODO add some postcopy stats */
697 info
->has_status
= true;
698 info
->has_total_time
= true;
699 info
->total_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
)
701 info
->has_expected_downtime
= true;
702 info
->expected_downtime
= s
->expected_downtime
;
703 info
->has_setup_time
= true;
704 info
->setup_time
= s
->setup_time
;
706 populate_ram_info(info
, s
);
708 if (blk_mig_active()) {
709 info
->has_disk
= true;
710 info
->disk
= g_malloc0(sizeof(*info
->disk
));
711 info
->disk
->transferred
= blk_mig_bytes_transferred();
712 info
->disk
->remaining
= blk_mig_bytes_remaining();
713 info
->disk
->total
= blk_mig_bytes_total();
716 get_xbzrle_cache_stats(info
);
718 case MIGRATION_STATUS_COLO
:
719 info
->has_status
= true;
720 /* TODO: display COLO specific information (checkpoint info etc.) */
722 case MIGRATION_STATUS_COMPLETED
:
723 get_xbzrle_cache_stats(info
);
725 info
->has_status
= true;
726 info
->has_total_time
= true;
727 info
->total_time
= s
->total_time
;
728 info
->has_downtime
= true;
729 info
->downtime
= s
->downtime
;
730 info
->has_setup_time
= true;
731 info
->setup_time
= s
->setup_time
;
733 populate_ram_info(info
, s
);
735 case MIGRATION_STATUS_FAILED
:
736 info
->has_status
= true;
738 info
->has_error_desc
= true;
739 info
->error_desc
= g_strdup(error_get_pretty(s
->error
));
742 case MIGRATION_STATUS_CANCELLED
:
743 info
->has_status
= true;
746 info
->status
= s
->state
;
751 void qmp_migrate_set_capabilities(MigrationCapabilityStatusList
*params
,
754 MigrationState
*s
= migrate_get_current();
755 MigrationCapabilityStatusList
*cap
;
756 bool old_postcopy_cap
= migrate_postcopy_ram();
758 if (migration_is_setup_or_active(s
->state
)) {
759 error_setg(errp
, QERR_MIGRATION_ACTIVE
);
763 for (cap
= params
; cap
; cap
= cap
->next
) {
764 if (cap
->value
->capability
== MIGRATION_CAPABILITY_X_COLO
) {
765 if (!colo_supported()) {
766 error_setg(errp
, "COLO is not currently supported, please"
767 " configure with --enable-colo option in order to"
768 " support COLO feature");
772 s
->enabled_capabilities
[cap
->value
->capability
] = cap
->value
->state
;
775 if (migrate_postcopy_ram()) {
776 if (migrate_use_compression()) {
777 /* The decompression threads asynchronously write into RAM
778 * rather than use the atomic copies needed to avoid
779 * userfaulting. It should be possible to fix the decompression
780 * threads for compatibility in future.
782 error_report("Postcopy is not currently compatible with "
784 s
->enabled_capabilities
[MIGRATION_CAPABILITY_POSTCOPY_RAM
] =
787 /* This check is reasonably expensive, so only when it's being
788 * set the first time, also it's only the destination that needs
791 if (!old_postcopy_cap
&& runstate_check(RUN_STATE_INMIGRATE
) &&
792 !postcopy_ram_supported_by_host()) {
793 /* postcopy_ram_supported_by_host will have emitted a more
796 error_report("Postcopy is not supported");
797 s
->enabled_capabilities
[MIGRATION_CAPABILITY_POSTCOPY_RAM
] =
803 void qmp_migrate_set_parameters(MigrationParameters
*params
, Error
**errp
)
805 MigrationState
*s
= migrate_get_current();
807 if (params
->has_compress_level
&&
808 (params
->compress_level
< 0 || params
->compress_level
> 9)) {
809 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
, "compress_level",
810 "is invalid, it should be in the range of 0 to 9");
813 if (params
->has_compress_threads
&&
814 (params
->compress_threads
< 1 || params
->compress_threads
> 255)) {
815 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
,
817 "is invalid, it should be in the range of 1 to 255");
820 if (params
->has_decompress_threads
&&
821 (params
->decompress_threads
< 1 || params
->decompress_threads
> 255)) {
822 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
,
823 "decompress_threads",
824 "is invalid, it should be in the range of 1 to 255");
827 if (params
->has_cpu_throttle_initial
&&
828 (params
->cpu_throttle_initial
< 1 ||
829 params
->cpu_throttle_initial
> 99)) {
830 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
,
831 "cpu_throttle_initial",
832 "an integer in the range of 1 to 99");
835 if (params
->has_cpu_throttle_increment
&&
836 (params
->cpu_throttle_increment
< 1 ||
837 params
->cpu_throttle_increment
> 99)) {
838 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
,
839 "cpu_throttle_increment",
840 "an integer in the range of 1 to 99");
843 if (params
->has_max_bandwidth
&&
844 (params
->max_bandwidth
< 0 || params
->max_bandwidth
> SIZE_MAX
)) {
845 error_setg(errp
, "Parameter 'max_bandwidth' expects an integer in the"
846 " range of 0 to %zu bytes/second", SIZE_MAX
);
849 if (params
->has_downtime_limit
&&
850 (params
->downtime_limit
< 0 || params
->downtime_limit
> 2000000)) {
851 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
,
853 "an integer in the range of 0 to 2000000 milliseconds");
856 if (params
->has_x_checkpoint_delay
&& (params
->x_checkpoint_delay
< 0)) {
857 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
,
858 "x_checkpoint_delay",
859 "is invalid, it should be positive");
862 if (params
->has_compress_level
) {
863 s
->parameters
.compress_level
= params
->compress_level
;
865 if (params
->has_compress_threads
) {
866 s
->parameters
.compress_threads
= params
->compress_threads
;
868 if (params
->has_decompress_threads
) {
869 s
->parameters
.decompress_threads
= params
->decompress_threads
;
871 if (params
->has_cpu_throttle_initial
) {
872 s
->parameters
.cpu_throttle_initial
= params
->cpu_throttle_initial
;
874 if (params
->has_cpu_throttle_increment
) {
875 s
->parameters
.cpu_throttle_increment
= params
->cpu_throttle_increment
;
877 if (params
->has_tls_creds
) {
878 g_free(s
->parameters
.tls_creds
);
879 s
->parameters
.tls_creds
= g_strdup(params
->tls_creds
);
881 if (params
->has_tls_hostname
) {
882 g_free(s
->parameters
.tls_hostname
);
883 s
->parameters
.tls_hostname
= g_strdup(params
->tls_hostname
);
885 if (params
->has_max_bandwidth
) {
886 s
->parameters
.max_bandwidth
= params
->max_bandwidth
;
887 if (s
->to_dst_file
) {
888 qemu_file_set_rate_limit(s
->to_dst_file
,
889 s
->parameters
.max_bandwidth
/ XFER_LIMIT_RATIO
);
892 if (params
->has_downtime_limit
) {
893 s
->parameters
.downtime_limit
= params
->downtime_limit
;
896 if (params
->has_x_checkpoint_delay
) {
897 s
->parameters
.x_checkpoint_delay
= params
->x_checkpoint_delay
;
902 void qmp_migrate_start_postcopy(Error
**errp
)
904 MigrationState
*s
= migrate_get_current();
906 if (!migrate_postcopy_ram()) {
907 error_setg(errp
, "Enable postcopy with migrate_set_capability before"
908 " the start of migration");
912 if (s
->state
== MIGRATION_STATUS_NONE
) {
913 error_setg(errp
, "Postcopy must be started after migration has been"
918 * we don't error if migration has finished since that would be racy
919 * with issuing this command.
921 atomic_set(&s
->start_postcopy
, true);
924 /* shared migration helpers */
926 void migrate_set_state(int *state
, int old_state
, int new_state
)
928 if (atomic_cmpxchg(state
, old_state
, new_state
) == old_state
) {
929 trace_migrate_set_state(new_state
);
930 migrate_generate_event(new_state
);
934 static void migrate_fd_cleanup(void *opaque
)
936 MigrationState
*s
= opaque
;
938 qemu_bh_delete(s
->cleanup_bh
);
939 s
->cleanup_bh
= NULL
;
943 if (s
->to_dst_file
) {
944 trace_migrate_fd_cleanup();
945 qemu_mutex_unlock_iothread();
946 if (s
->migration_thread_running
) {
947 qemu_thread_join(&s
->thread
);
948 s
->migration_thread_running
= false;
950 qemu_mutex_lock_iothread();
952 migrate_compress_threads_join();
953 qemu_fclose(s
->to_dst_file
);
954 s
->to_dst_file
= NULL
;
957 assert((s
->state
!= MIGRATION_STATUS_ACTIVE
) &&
958 (s
->state
!= MIGRATION_STATUS_POSTCOPY_ACTIVE
));
960 if (s
->state
== MIGRATION_STATUS_CANCELLING
) {
961 migrate_set_state(&s
->state
, MIGRATION_STATUS_CANCELLING
,
962 MIGRATION_STATUS_CANCELLED
);
965 notifier_list_notify(&migration_state_notifiers
, s
);
968 void migrate_fd_error(MigrationState
*s
, const Error
*error
)
970 trace_migrate_fd_error(error_get_pretty(error
));
971 assert(s
->to_dst_file
== NULL
);
972 migrate_set_state(&s
->state
, MIGRATION_STATUS_SETUP
,
973 MIGRATION_STATUS_FAILED
);
975 s
->error
= error_copy(error
);
977 notifier_list_notify(&migration_state_notifiers
, s
);
980 static void migrate_fd_cancel(MigrationState
*s
)
983 QEMUFile
*f
= migrate_get_current()->to_dst_file
;
984 trace_migrate_fd_cancel();
986 if (s
->rp_state
.from_dst_file
) {
987 /* shutdown the rp socket, so causing the rp thread to shutdown */
988 qemu_file_shutdown(s
->rp_state
.from_dst_file
);
992 old_state
= s
->state
;
993 if (!migration_is_setup_or_active(old_state
)) {
996 migrate_set_state(&s
->state
, old_state
, MIGRATION_STATUS_CANCELLING
);
997 } while (s
->state
!= MIGRATION_STATUS_CANCELLING
);
1000 * If we're unlucky the migration code might be stuck somewhere in a
1001 * send/write while the network has failed and is waiting to timeout;
1002 * if we've got shutdown(2) available then we can force it to quit.
1003 * The outgoing qemu file gets closed in migrate_fd_cleanup that is
1004 * called in a bh, so there is no race against this cancel.
1006 if (s
->state
== MIGRATION_STATUS_CANCELLING
&& f
) {
1007 qemu_file_shutdown(f
);
1011 void add_migration_state_change_notifier(Notifier
*notify
)
1013 notifier_list_add(&migration_state_notifiers
, notify
);
1016 void remove_migration_state_change_notifier(Notifier
*notify
)
1018 notifier_remove(notify
);
1021 bool migration_in_setup(MigrationState
*s
)
1023 return s
->state
== MIGRATION_STATUS_SETUP
;
1026 bool migration_has_finished(MigrationState
*s
)
1028 return s
->state
== MIGRATION_STATUS_COMPLETED
;
1031 bool migration_has_failed(MigrationState
*s
)
1033 return (s
->state
== MIGRATION_STATUS_CANCELLED
||
1034 s
->state
== MIGRATION_STATUS_FAILED
);
1037 bool migration_in_postcopy(MigrationState
*s
)
1039 return (s
->state
== MIGRATION_STATUS_POSTCOPY_ACTIVE
);
1042 bool migration_in_postcopy_after_devices(MigrationState
*s
)
1044 return migration_in_postcopy(s
) && s
->postcopy_after_devices
;
1047 MigrationState
*migrate_init(const MigrationParams
*params
)
1049 MigrationState
*s
= migrate_get_current();
1052 * Reinitialise all migration state, except
1053 * parameters/capabilities that the user set, and
1059 s
->to_dst_file
= NULL
;
1060 s
->state
= MIGRATION_STATUS_NONE
;
1061 s
->params
= *params
;
1062 s
->rp_state
.from_dst_file
= NULL
;
1063 s
->rp_state
.error
= false;
1066 s
->expected_downtime
= 0;
1067 s
->dirty_pages_rate
= 0;
1068 s
->dirty_bytes_rate
= 0;
1070 s
->dirty_sync_count
= 0;
1071 s
->start_postcopy
= false;
1072 s
->postcopy_after_devices
= false;
1073 s
->postcopy_requests
= 0;
1074 s
->migration_thread_running
= false;
1075 s
->last_req_rb
= NULL
;
1076 error_free(s
->error
);
1079 migrate_set_state(&s
->state
, MIGRATION_STATUS_NONE
, MIGRATION_STATUS_SETUP
);
1081 QSIMPLEQ_INIT(&s
->src_page_requests
);
1083 s
->total_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1087 static GSList
*migration_blockers
;
1089 void migrate_add_blocker(Error
*reason
)
1091 migration_blockers
= g_slist_prepend(migration_blockers
, reason
);
1094 void migrate_del_blocker(Error
*reason
)
1096 migration_blockers
= g_slist_remove(migration_blockers
, reason
);
1099 void qmp_migrate_incoming(const char *uri
, Error
**errp
)
1101 Error
*local_err
= NULL
;
1102 static bool once
= true;
1104 if (!deferred_incoming
) {
1105 error_setg(errp
, "For use with '-incoming defer'");
1109 error_setg(errp
, "The incoming migration has already been started");
1112 qemu_start_incoming_migration(uri
, &local_err
);
1115 error_propagate(errp
, local_err
);
1122 bool migration_is_blocked(Error
**errp
)
1124 if (qemu_savevm_state_blocked(errp
)) {
1128 if (migration_blockers
) {
1129 *errp
= error_copy(migration_blockers
->data
);
1136 void qmp_migrate(const char *uri
, bool has_blk
, bool blk
,
1137 bool has_inc
, bool inc
, bool has_detach
, bool detach
,
1140 Error
*local_err
= NULL
;
1141 MigrationState
*s
= migrate_get_current();
1142 MigrationParams params
;
1145 params
.blk
= has_blk
&& blk
;
1146 params
.shared
= has_inc
&& inc
;
1148 if (migration_is_setup_or_active(s
->state
) ||
1149 s
->state
== MIGRATION_STATUS_CANCELLING
||
1150 s
->state
== MIGRATION_STATUS_COLO
) {
1151 error_setg(errp
, QERR_MIGRATION_ACTIVE
);
1154 if (runstate_check(RUN_STATE_INMIGRATE
)) {
1155 error_setg(errp
, "Guest is waiting for an incoming migration");
1159 if (migration_is_blocked(errp
)) {
1163 s
= migrate_init(¶ms
);
1165 if (strstart(uri
, "tcp:", &p
)) {
1166 tcp_start_outgoing_migration(s
, p
, &local_err
);
1168 } else if (strstart(uri
, "rdma:", &p
)) {
1169 rdma_start_outgoing_migration(s
, p
, &local_err
);
1171 } else if (strstart(uri
, "exec:", &p
)) {
1172 exec_start_outgoing_migration(s
, p
, &local_err
);
1173 } else if (strstart(uri
, "unix:", &p
)) {
1174 unix_start_outgoing_migration(s
, p
, &local_err
);
1175 } else if (strstart(uri
, "fd:", &p
)) {
1176 fd_start_outgoing_migration(s
, p
, &local_err
);
1178 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
, "uri",
1179 "a valid migration protocol");
1180 migrate_set_state(&s
->state
, MIGRATION_STATUS_SETUP
,
1181 MIGRATION_STATUS_FAILED
);
1186 migrate_fd_error(s
, local_err
);
1187 error_propagate(errp
, local_err
);
1192 void qmp_migrate_cancel(Error
**errp
)
1194 migrate_fd_cancel(migrate_get_current());
1197 void qmp_migrate_set_cache_size(int64_t value
, Error
**errp
)
1199 MigrationState
*s
= migrate_get_current();
1202 /* Check for truncation */
1203 if (value
!= (size_t)value
) {
1204 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
, "cache size",
1205 "exceeding address space");
1209 /* Cache should not be larger than guest ram size */
1210 if (value
> ram_bytes_total()) {
1211 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
, "cache size",
1212 "exceeds guest ram size ");
1216 new_size
= xbzrle_cache_resize(value
);
1218 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
, "cache size",
1219 "is smaller than page size");
1223 s
->xbzrle_cache_size
= new_size
;
1226 int64_t qmp_query_migrate_cache_size(Error
**errp
)
1228 return migrate_xbzrle_cache_size();
1231 void qmp_migrate_set_speed(int64_t value
, Error
**errp
)
1233 MigrationParameters p
= {
1234 .has_max_bandwidth
= true,
1235 .max_bandwidth
= value
,
1238 qmp_migrate_set_parameters(&p
, errp
);
1241 void qmp_migrate_set_downtime(double value
, Error
**errp
)
1243 value
*= 1000; /* Convert to milliseconds */
1244 value
= MAX(0, MIN(INT64_MAX
, value
));
1246 MigrationParameters p
= {
1247 .has_downtime_limit
= true,
1248 .downtime_limit
= value
,
1251 qmp_migrate_set_parameters(&p
, errp
);
1254 bool migrate_postcopy_ram(void)
1258 s
= migrate_get_current();
1260 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_POSTCOPY_RAM
];
1263 bool migrate_auto_converge(void)
1267 s
= migrate_get_current();
1269 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_AUTO_CONVERGE
];
1272 bool migrate_zero_blocks(void)
1276 s
= migrate_get_current();
1278 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_ZERO_BLOCKS
];
1281 bool migrate_use_compression(void)
1285 s
= migrate_get_current();
1287 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_COMPRESS
];
1290 int migrate_compress_level(void)
1294 s
= migrate_get_current();
1296 return s
->parameters
.compress_level
;
1299 int migrate_compress_threads(void)
1303 s
= migrate_get_current();
1305 return s
->parameters
.compress_threads
;
1308 int migrate_decompress_threads(void)
1312 s
= migrate_get_current();
1314 return s
->parameters
.decompress_threads
;
1317 bool migrate_use_events(void)
1321 s
= migrate_get_current();
1323 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_EVENTS
];
1326 int migrate_use_xbzrle(void)
1330 s
= migrate_get_current();
1332 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_XBZRLE
];
1335 int64_t migrate_xbzrle_cache_size(void)
1339 s
= migrate_get_current();
1341 return s
->xbzrle_cache_size
;
1344 /* migration thread support */
1346 * Something bad happened to the RP stream, mark an error
1347 * The caller shall print or trace something to indicate why
1349 static void mark_source_rp_bad(MigrationState
*s
)
1351 s
->rp_state
.error
= true;
1354 static struct rp_cmd_args
{
1355 ssize_t len
; /* -1 = variable */
1358 [MIG_RP_MSG_INVALID
] = { .len
= -1, .name
= "INVALID" },
1359 [MIG_RP_MSG_SHUT
] = { .len
= 4, .name
= "SHUT" },
1360 [MIG_RP_MSG_PONG
] = { .len
= 4, .name
= "PONG" },
1361 [MIG_RP_MSG_REQ_PAGES
] = { .len
= 12, .name
= "REQ_PAGES" },
1362 [MIG_RP_MSG_REQ_PAGES_ID
] = { .len
= -1, .name
= "REQ_PAGES_ID" },
1363 [MIG_RP_MSG_MAX
] = { .len
= -1, .name
= "MAX" },
1367 * Process a request for pages received on the return path,
1368 * We're allowed to send more than requested (e.g. to round to our page size)
1369 * and we don't need to send pages that have already been sent.
1371 static void migrate_handle_rp_req_pages(MigrationState
*ms
, const char* rbname
,
1372 ram_addr_t start
, size_t len
)
1374 long our_host_ps
= getpagesize();
1376 trace_migrate_handle_rp_req_pages(rbname
, start
, len
);
1379 * Since we currently insist on matching page sizes, just sanity check
1380 * we're being asked for whole host pages.
1382 if (start
& (our_host_ps
-1) ||
1383 (len
& (our_host_ps
-1))) {
1384 error_report("%s: Misaligned page request, start: " RAM_ADDR_FMT
1385 " len: %zd", __func__
, start
, len
);
1386 mark_source_rp_bad(ms
);
1390 if (ram_save_queue_pages(ms
, rbname
, start
, len
)) {
1391 mark_source_rp_bad(ms
);
1396 * Handles messages sent on the return path towards the source VM
1399 static void *source_return_path_thread(void *opaque
)
1401 MigrationState
*ms
= opaque
;
1402 QEMUFile
*rp
= ms
->rp_state
.from_dst_file
;
1403 uint16_t header_len
, header_type
;
1405 uint32_t tmp32
, sibling_error
;
1406 ram_addr_t start
= 0; /* =0 to silence warning */
1407 size_t len
= 0, expected_len
;
1410 trace_source_return_path_thread_entry();
1411 while (!ms
->rp_state
.error
&& !qemu_file_get_error(rp
) &&
1412 migration_is_setup_or_active(ms
->state
)) {
1413 trace_source_return_path_thread_loop_top();
1414 header_type
= qemu_get_be16(rp
);
1415 header_len
= qemu_get_be16(rp
);
1417 if (header_type
>= MIG_RP_MSG_MAX
||
1418 header_type
== MIG_RP_MSG_INVALID
) {
1419 error_report("RP: Received invalid message 0x%04x length 0x%04x",
1420 header_type
, header_len
);
1421 mark_source_rp_bad(ms
);
1425 if ((rp_cmd_args
[header_type
].len
!= -1 &&
1426 header_len
!= rp_cmd_args
[header_type
].len
) ||
1427 header_len
> sizeof(buf
)) {
1428 error_report("RP: Received '%s' message (0x%04x) with"
1429 "incorrect length %d expecting %zu",
1430 rp_cmd_args
[header_type
].name
, header_type
, header_len
,
1431 (size_t)rp_cmd_args
[header_type
].len
);
1432 mark_source_rp_bad(ms
);
1436 /* We know we've got a valid header by this point */
1437 res
= qemu_get_buffer(rp
, buf
, header_len
);
1438 if (res
!= header_len
) {
1439 error_report("RP: Failed reading data for message 0x%04x"
1440 " read %d expected %d",
1441 header_type
, res
, header_len
);
1442 mark_source_rp_bad(ms
);
1446 /* OK, we have the message and the data */
1447 switch (header_type
) {
1448 case MIG_RP_MSG_SHUT
:
1449 sibling_error
= ldl_be_p(buf
);
1450 trace_source_return_path_thread_shut(sibling_error
);
1451 if (sibling_error
) {
1452 error_report("RP: Sibling indicated error %d", sibling_error
);
1453 mark_source_rp_bad(ms
);
1456 * We'll let the main thread deal with closing the RP
1457 * we could do a shutdown(2) on it, but we're the only user
1458 * anyway, so there's nothing gained.
1462 case MIG_RP_MSG_PONG
:
1463 tmp32
= ldl_be_p(buf
);
1464 trace_source_return_path_thread_pong(tmp32
);
1467 case MIG_RP_MSG_REQ_PAGES
:
1468 start
= ldq_be_p(buf
);
1469 len
= ldl_be_p(buf
+ 8);
1470 migrate_handle_rp_req_pages(ms
, NULL
, start
, len
);
1473 case MIG_RP_MSG_REQ_PAGES_ID
:
1474 expected_len
= 12 + 1; /* header + termination */
1476 if (header_len
>= expected_len
) {
1477 start
= ldq_be_p(buf
);
1478 len
= ldl_be_p(buf
+ 8);
1479 /* Now we expect an idstr */
1480 tmp32
= buf
[12]; /* Length of the following idstr */
1481 buf
[13 + tmp32
] = '\0';
1482 expected_len
+= tmp32
;
1484 if (header_len
!= expected_len
) {
1485 error_report("RP: Req_Page_id with length %d expecting %zd",
1486 header_len
, expected_len
);
1487 mark_source_rp_bad(ms
);
1490 migrate_handle_rp_req_pages(ms
, (char *)&buf
[13], start
, len
);
1497 if (qemu_file_get_error(rp
)) {
1498 trace_source_return_path_thread_bad_end();
1499 mark_source_rp_bad(ms
);
1502 trace_source_return_path_thread_end();
1504 ms
->rp_state
.from_dst_file
= NULL
;
1509 static int open_return_path_on_source(MigrationState
*ms
)
1512 ms
->rp_state
.from_dst_file
= qemu_file_get_return_path(ms
->to_dst_file
);
1513 if (!ms
->rp_state
.from_dst_file
) {
1517 trace_open_return_path_on_source();
1518 qemu_thread_create(&ms
->rp_state
.rp_thread
, "return path",
1519 source_return_path_thread
, ms
, QEMU_THREAD_JOINABLE
);
1521 trace_open_return_path_on_source_continue();
1526 /* Returns 0 if the RP was ok, otherwise there was an error on the RP */
1527 static int await_return_path_close_on_source(MigrationState
*ms
)
1530 * If this is a normal exit then the destination will send a SHUT and the
1531 * rp_thread will exit, however if there's an error we need to cause
1534 if (qemu_file_get_error(ms
->to_dst_file
) && ms
->rp_state
.from_dst_file
) {
1536 * shutdown(2), if we have it, will cause it to unblock if it's stuck
1537 * waiting for the destination.
1539 qemu_file_shutdown(ms
->rp_state
.from_dst_file
);
1540 mark_source_rp_bad(ms
);
1542 trace_await_return_path_close_on_source_joining();
1543 qemu_thread_join(&ms
->rp_state
.rp_thread
);
1544 trace_await_return_path_close_on_source_close();
1545 return ms
->rp_state
.error
;
1549 * Switch from normal iteration to postcopy
1550 * Returns non-0 on error
1552 static int postcopy_start(MigrationState
*ms
, bool *old_vm_running
)
1555 QIOChannelBuffer
*bioc
;
1557 int64_t time_at_stop
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1558 migrate_set_state(&ms
->state
, MIGRATION_STATUS_ACTIVE
,
1559 MIGRATION_STATUS_POSTCOPY_ACTIVE
);
1561 trace_postcopy_start();
1562 qemu_mutex_lock_iothread();
1563 trace_postcopy_start_set_run();
1565 qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER
);
1566 *old_vm_running
= runstate_is_running();
1567 global_state_store();
1568 ret
= vm_stop_force_state(RUN_STATE_FINISH_MIGRATE
);
1573 ret
= bdrv_inactivate_all();
1579 * Cause any non-postcopiable, but iterative devices to
1580 * send out their final data.
1582 qemu_savevm_state_complete_precopy(ms
->to_dst_file
, true);
1585 * in Finish migrate and with the io-lock held everything should
1586 * be quiet, but we've potentially still got dirty pages and we
1587 * need to tell the destination to throw any pages it's already received
1590 if (ram_postcopy_send_discard_bitmap(ms
)) {
1591 error_report("postcopy send discard bitmap failed");
1596 * send rest of state - note things that are doing postcopy
1597 * will notice we're in POSTCOPY_ACTIVE and not actually
1598 * wrap their state up here
1600 qemu_file_set_rate_limit(ms
->to_dst_file
, INT64_MAX
);
1601 /* Ping just for debugging, helps line traces up */
1602 qemu_savevm_send_ping(ms
->to_dst_file
, 2);
1605 * While loading the device state we may trigger page transfer
1606 * requests and the fd must be free to process those, and thus
1607 * the destination must read the whole device state off the fd before
1608 * it starts processing it. Unfortunately the ad-hoc migration format
1609 * doesn't allow the destination to know the size to read without fully
1610 * parsing it through each devices load-state code (especially the open
1611 * coded devices that use get/put).
1612 * So we wrap the device state up in a package with a length at the start;
1613 * to do this we use a qemu_buf to hold the whole of the device state.
1615 bioc
= qio_channel_buffer_new(4096);
1616 qio_channel_set_name(QIO_CHANNEL(bioc
), "migration-postcopy-buffer");
1617 fb
= qemu_fopen_channel_output(QIO_CHANNEL(bioc
));
1618 object_unref(OBJECT(bioc
));
1621 * Make sure the receiver can get incoming pages before we send the rest
1624 qemu_savevm_send_postcopy_listen(fb
);
1626 qemu_savevm_state_complete_precopy(fb
, false);
1627 qemu_savevm_send_ping(fb
, 3);
1629 qemu_savevm_send_postcopy_run(fb
);
1631 /* <><> end of stuff going into the package */
1633 /* Now send that blob */
1634 if (qemu_savevm_send_packaged(ms
->to_dst_file
, bioc
->data
, bioc
->usage
)) {
1639 /* Send a notify to give a chance for anything that needs to happen
1640 * at the transition to postcopy and after the device state; in particular
1641 * spice needs to trigger a transition now
1643 ms
->postcopy_after_devices
= true;
1644 notifier_list_notify(&migration_state_notifiers
, ms
);
1646 ms
->downtime
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
) - time_at_stop
;
1648 qemu_mutex_unlock_iothread();
1651 * Although this ping is just for debug, it could potentially be
1652 * used for getting a better measurement of downtime at the source.
1654 qemu_savevm_send_ping(ms
->to_dst_file
, 4);
1656 ret
= qemu_file_get_error(ms
->to_dst_file
);
1658 error_report("postcopy_start: Migration stream errored");
1659 migrate_set_state(&ms
->state
, MIGRATION_STATUS_POSTCOPY_ACTIVE
,
1660 MIGRATION_STATUS_FAILED
);
1668 migrate_set_state(&ms
->state
, MIGRATION_STATUS_POSTCOPY_ACTIVE
,
1669 MIGRATION_STATUS_FAILED
);
1670 qemu_mutex_unlock_iothread();
1675 * migration_completion: Used by migration_thread when there's not much left.
1676 * The caller 'breaks' the loop when this returns.
1678 * @s: Current migration state
1679 * @current_active_state: The migration state we expect to be in
1680 * @*old_vm_running: Pointer to old_vm_running flag
1681 * @*start_time: Pointer to time to update
1683 static void migration_completion(MigrationState
*s
, int current_active_state
,
1684 bool *old_vm_running
,
1685 int64_t *start_time
)
1689 if (s
->state
== MIGRATION_STATUS_ACTIVE
) {
1690 qemu_mutex_lock_iothread();
1691 *start_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1692 qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER
);
1693 *old_vm_running
= runstate_is_running();
1694 ret
= global_state_store();
1697 ret
= vm_stop_force_state(RUN_STATE_FINISH_MIGRATE
);
1699 * Don't mark the image with BDRV_O_INACTIVE flag if
1700 * we will go into COLO stage later.
1702 if (ret
>= 0 && !migrate_colo_enabled()) {
1703 ret
= bdrv_inactivate_all();
1706 qemu_file_set_rate_limit(s
->to_dst_file
, INT64_MAX
);
1707 qemu_savevm_state_complete_precopy(s
->to_dst_file
, false);
1710 qemu_mutex_unlock_iothread();
1715 } else if (s
->state
== MIGRATION_STATUS_POSTCOPY_ACTIVE
) {
1716 trace_migration_completion_postcopy_end();
1718 qemu_savevm_state_complete_postcopy(s
->to_dst_file
);
1719 trace_migration_completion_postcopy_end_after_complete();
1723 * If rp was opened we must clean up the thread before
1724 * cleaning everything else up (since if there are no failures
1725 * it will wait for the destination to send it's status in
1727 * Postcopy opens rp if enabled (even if it's not avtivated)
1729 if (migrate_postcopy_ram()) {
1731 trace_migration_completion_postcopy_end_before_rp();
1732 rp_error
= await_return_path_close_on_source(s
);
1733 trace_migration_completion_postcopy_end_after_rp(rp_error
);
1735 goto fail_invalidate
;
1739 if (qemu_file_get_error(s
->to_dst_file
)) {
1740 trace_migration_completion_file_err();
1741 goto fail_invalidate
;
1744 if (!migrate_colo_enabled()) {
1745 migrate_set_state(&s
->state
, current_active_state
,
1746 MIGRATION_STATUS_COMPLETED
);
1752 /* If not doing postcopy, vm_start() will be called: let's regain
1753 * control on images.
1755 if (s
->state
== MIGRATION_STATUS_ACTIVE
) {
1756 Error
*local_err
= NULL
;
1758 bdrv_invalidate_cache_all(&local_err
);
1760 error_report_err(local_err
);
1765 migrate_set_state(&s
->state
, current_active_state
,
1766 MIGRATION_STATUS_FAILED
);
1769 bool migrate_colo_enabled(void)
1771 MigrationState
*s
= migrate_get_current();
1772 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_X_COLO
];
1776 * Master migration thread on the source VM.
1777 * It drives the migration and pumps the data down the outgoing channel.
1779 static void *migration_thread(void *opaque
)
1781 MigrationState
*s
= opaque
;
1782 /* Used by the bandwidth calcs, updated later */
1783 int64_t initial_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1784 int64_t setup_start
= qemu_clock_get_ms(QEMU_CLOCK_HOST
);
1785 int64_t initial_bytes
= 0;
1786 int64_t max_size
= 0;
1787 int64_t start_time
= initial_time
;
1789 bool old_vm_running
= false;
1790 bool entered_postcopy
= false;
1791 /* The active state we expect to be in; ACTIVE or POSTCOPY_ACTIVE */
1792 enum MigrationStatus current_active_state
= MIGRATION_STATUS_ACTIVE
;
1793 bool enable_colo
= migrate_colo_enabled();
1795 rcu_register_thread();
1797 qemu_savevm_state_header(s
->to_dst_file
);
1799 if (migrate_postcopy_ram()) {
1800 /* Now tell the dest that it should open its end so it can reply */
1801 qemu_savevm_send_open_return_path(s
->to_dst_file
);
1803 /* And do a ping that will make stuff easier to debug */
1804 qemu_savevm_send_ping(s
->to_dst_file
, 1);
1807 * Tell the destination that we *might* want to do postcopy later;
1808 * if the other end can't do postcopy it should fail now, nice and
1811 qemu_savevm_send_postcopy_advise(s
->to_dst_file
);
1814 qemu_savevm_state_begin(s
->to_dst_file
, &s
->params
);
1816 s
->setup_time
= qemu_clock_get_ms(QEMU_CLOCK_HOST
) - setup_start
;
1817 current_active_state
= MIGRATION_STATUS_ACTIVE
;
1818 migrate_set_state(&s
->state
, MIGRATION_STATUS_SETUP
,
1819 MIGRATION_STATUS_ACTIVE
);
1821 trace_migration_thread_setup_complete();
1823 while (s
->state
== MIGRATION_STATUS_ACTIVE
||
1824 s
->state
== MIGRATION_STATUS_POSTCOPY_ACTIVE
) {
1825 int64_t current_time
;
1826 uint64_t pending_size
;
1828 if (!qemu_file_rate_limit(s
->to_dst_file
)) {
1829 uint64_t pend_post
, pend_nonpost
;
1831 qemu_savevm_state_pending(s
->to_dst_file
, max_size
, &pend_nonpost
,
1833 pending_size
= pend_nonpost
+ pend_post
;
1834 trace_migrate_pending(pending_size
, max_size
,
1835 pend_post
, pend_nonpost
);
1836 if (pending_size
&& pending_size
>= max_size
) {
1837 /* Still a significant amount to transfer */
1839 if (migrate_postcopy_ram() &&
1840 s
->state
!= MIGRATION_STATUS_POSTCOPY_ACTIVE
&&
1841 pend_nonpost
<= max_size
&&
1842 atomic_read(&s
->start_postcopy
)) {
1844 if (!postcopy_start(s
, &old_vm_running
)) {
1845 current_active_state
= MIGRATION_STATUS_POSTCOPY_ACTIVE
;
1846 entered_postcopy
= true;
1851 /* Just another iteration step */
1852 qemu_savevm_state_iterate(s
->to_dst_file
, entered_postcopy
);
1854 trace_migration_thread_low_pending(pending_size
);
1855 migration_completion(s
, current_active_state
,
1856 &old_vm_running
, &start_time
);
1861 if (qemu_file_get_error(s
->to_dst_file
)) {
1862 migrate_set_state(&s
->state
, current_active_state
,
1863 MIGRATION_STATUS_FAILED
);
1864 trace_migration_thread_file_err();
1867 current_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1868 if (current_time
>= initial_time
+ BUFFER_DELAY
) {
1869 uint64_t transferred_bytes
= qemu_ftell(s
->to_dst_file
) -
1871 uint64_t time_spent
= current_time
- initial_time
;
1872 double bandwidth
= (double)transferred_bytes
/ time_spent
;
1873 max_size
= bandwidth
* s
->parameters
.downtime_limit
;
1875 s
->mbps
= (((double) transferred_bytes
* 8.0) /
1876 ((double) time_spent
/ 1000.0)) / 1000.0 / 1000.0;
1878 trace_migrate_transferred(transferred_bytes
, time_spent
,
1879 bandwidth
, max_size
);
1880 /* if we haven't sent anything, we don't want to recalculate
1881 10000 is a small enough number for our purposes */
1882 if (s
->dirty_bytes_rate
&& transferred_bytes
> 10000) {
1883 s
->expected_downtime
= s
->dirty_bytes_rate
/ bandwidth
;
1886 qemu_file_reset_rate_limit(s
->to_dst_file
);
1887 initial_time
= current_time
;
1888 initial_bytes
= qemu_ftell(s
->to_dst_file
);
1890 if (qemu_file_rate_limit(s
->to_dst_file
)) {
1891 /* usleep expects microseconds */
1892 g_usleep((initial_time
+ BUFFER_DELAY
- current_time
)*1000);
1896 trace_migration_thread_after_loop();
1897 /* If we enabled cpu throttling for auto-converge, turn it off. */
1898 cpu_throttle_stop();
1899 end_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1901 qemu_mutex_lock_iothread();
1903 * The resource has been allocated by migration will be reused in COLO
1904 * process, so don't release them.
1907 qemu_savevm_state_cleanup();
1909 if (s
->state
== MIGRATION_STATUS_COMPLETED
) {
1910 uint64_t transferred_bytes
= qemu_ftell(s
->to_dst_file
);
1911 s
->total_time
= end_time
- s
->total_time
;
1912 if (!entered_postcopy
) {
1913 s
->downtime
= end_time
- start_time
;
1915 if (s
->total_time
) {
1916 s
->mbps
= (((double) transferred_bytes
* 8.0) /
1917 ((double) s
->total_time
)) / 1000;
1919 runstate_set(RUN_STATE_POSTMIGRATE
);
1921 if (s
->state
== MIGRATION_STATUS_ACTIVE
&& enable_colo
) {
1922 migrate_start_colo_process(s
);
1923 qemu_savevm_state_cleanup();
1925 * Fixme: we will run VM in COLO no matter its old running state.
1926 * After exited COLO, we will keep running.
1928 old_vm_running
= true;
1930 if (old_vm_running
&& !entered_postcopy
) {
1933 if (runstate_check(RUN_STATE_FINISH_MIGRATE
)) {
1934 runstate_set(RUN_STATE_POSTMIGRATE
);
1938 qemu_bh_schedule(s
->cleanup_bh
);
1939 qemu_mutex_unlock_iothread();
1941 rcu_unregister_thread();
1945 void migrate_fd_connect(MigrationState
*s
)
1947 s
->expected_downtime
= s
->parameters
.downtime_limit
;
1948 s
->cleanup_bh
= qemu_bh_new(migrate_fd_cleanup
, s
);
1950 qemu_file_set_blocking(s
->to_dst_file
, true);
1951 qemu_file_set_rate_limit(s
->to_dst_file
,
1952 s
->parameters
.max_bandwidth
/ XFER_LIMIT_RATIO
);
1954 /* Notify before starting migration thread */
1955 notifier_list_notify(&migration_state_notifiers
, s
);
1958 * Open the return path; currently for postcopy but other things might
1961 if (migrate_postcopy_ram()) {
1962 if (open_return_path_on_source(s
)) {
1963 error_report("Unable to open return-path for postcopy");
1964 migrate_set_state(&s
->state
, MIGRATION_STATUS_SETUP
,
1965 MIGRATION_STATUS_FAILED
);
1966 migrate_fd_cleanup(s
);
1971 migrate_compress_threads_create();
1972 qemu_thread_create(&s
->thread
, "migration", migration_thread
, s
,
1973 QEMU_THREAD_JOINABLE
);
1974 s
->migration_thread_running
= true;
1977 PostcopyState
postcopy_state_get(void)
1979 return atomic_mb_read(&incoming_postcopy_state
);
1982 /* Set the state and return the old state */
1983 PostcopyState
postcopy_state_set(PostcopyState new_state
)
1985 return atomic_xchg(&incoming_postcopy_state
, new_state
);