2 * Motorola ColdFire MCF5208 SoC emulation.
4 * Copyright (c) 2007 CodeSourcery.
6 * This code is licensed under the GPL
9 #include "qemu/osdep.h"
10 #include "qemu/units.h"
11 #include "qemu/error-report.h"
12 #include "qapi/error.h"
13 #include "qemu-common.h"
17 #include "hw/m68k/mcf.h"
18 #include "hw/m68k/mcf_fec.h"
19 #include "qemu/timer.h"
20 #include "hw/ptimer.h"
21 #include "sysemu/sysemu.h"
22 #include "sysemu/qtest.h"
24 #include "hw/boards.h"
25 #include "hw/loader.h"
26 #include "hw/sysbus.h"
28 #include "exec/address-spaces.h"
30 #define SYS_FREQ 166666666
32 #define ROM_SIZE 0x200000
34 #define PCSR_EN 0x0001
35 #define PCSR_RLD 0x0002
36 #define PCSR_PIF 0x0004
37 #define PCSR_PIE 0x0008
38 #define PCSR_OVW 0x0010
39 #define PCSR_DBG 0x0020
40 #define PCSR_DOZE 0x0040
41 #define PCSR_PRE_SHIFT 8
42 #define PCSR_PRE_MASK 0x0f00
53 static void m5208_timer_update(m5208_timer_state
*s
)
55 if ((s
->pcsr
& (PCSR_PIE
| PCSR_PIF
)) == (PCSR_PIE
| PCSR_PIF
))
56 qemu_irq_raise(s
->irq
);
58 qemu_irq_lower(s
->irq
);
61 static void m5208_timer_write(void *opaque
, hwaddr offset
,
62 uint64_t value
, unsigned size
)
64 m5208_timer_state
*s
= (m5208_timer_state
*)opaque
;
69 /* The PIF bit is set-to-clear. */
70 if (value
& PCSR_PIF
) {
74 /* Avoid frobbing the timer if we're just twiddling IRQ bits. */
75 if (((s
->pcsr
^ value
) & ~PCSR_PIE
) == 0) {
77 m5208_timer_update(s
);
81 ptimer_transaction_begin(s
->timer
);
82 if (s
->pcsr
& PCSR_EN
)
83 ptimer_stop(s
->timer
);
87 prescale
= 1 << ((s
->pcsr
& PCSR_PRE_MASK
) >> PCSR_PRE_SHIFT
);
88 ptimer_set_freq(s
->timer
, (SYS_FREQ
/ 2) / prescale
);
89 if (s
->pcsr
& PCSR_RLD
)
93 ptimer_set_limit(s
->timer
, limit
, 0);
95 if (s
->pcsr
& PCSR_EN
)
96 ptimer_run(s
->timer
, 0);
97 ptimer_transaction_commit(s
->timer
);
100 ptimer_transaction_begin(s
->timer
);
102 s
->pcsr
&= ~PCSR_PIF
;
103 if ((s
->pcsr
& PCSR_RLD
) == 0) {
104 if (s
->pcsr
& PCSR_OVW
)
105 ptimer_set_count(s
->timer
, value
);
107 ptimer_set_limit(s
->timer
, value
, s
->pcsr
& PCSR_OVW
);
109 ptimer_transaction_commit(s
->timer
);
114 hw_error("m5208_timer_write: Bad offset 0x%x\n", (int)offset
);
117 m5208_timer_update(s
);
120 static void m5208_timer_trigger(void *opaque
)
122 m5208_timer_state
*s
= (m5208_timer_state
*)opaque
;
124 m5208_timer_update(s
);
127 static uint64_t m5208_timer_read(void *opaque
, hwaddr addr
,
130 m5208_timer_state
*s
= (m5208_timer_state
*)opaque
;
137 return ptimer_get_count(s
->timer
);
139 hw_error("m5208_timer_read: Bad offset 0x%x\n", (int)addr
);
144 static const MemoryRegionOps m5208_timer_ops
= {
145 .read
= m5208_timer_read
,
146 .write
= m5208_timer_write
,
147 .endianness
= DEVICE_NATIVE_ENDIAN
,
150 static uint64_t m5208_sys_read(void *opaque
, hwaddr addr
,
154 case 0x110: /* SDCS0 */
157 for (n
= 0; n
< 32; n
++) {
158 if (ram_size
< (2u << n
))
161 return (n
- 1) | 0x40000000;
163 case 0x114: /* SDCS1 */
167 hw_error("m5208_sys_read: Bad offset 0x%x\n", (int)addr
);
172 static void m5208_sys_write(void *opaque
, hwaddr addr
,
173 uint64_t value
, unsigned size
)
175 hw_error("m5208_sys_write: Bad offset 0x%x\n", (int)addr
);
178 static const MemoryRegionOps m5208_sys_ops
= {
179 .read
= m5208_sys_read
,
180 .write
= m5208_sys_write
,
181 .endianness
= DEVICE_NATIVE_ENDIAN
,
184 static void mcf5208_sys_init(MemoryRegion
*address_space
, qemu_irq
*pic
)
186 MemoryRegion
*iomem
= g_new(MemoryRegion
, 1);
187 m5208_timer_state
*s
;
191 memory_region_init_io(iomem
, NULL
, &m5208_sys_ops
, NULL
, "m5208-sys", 0x00004000);
192 memory_region_add_subregion(address_space
, 0xfc0a8000, iomem
);
194 for (i
= 0; i
< 2; i
++) {
195 s
= g_new0(m5208_timer_state
, 1);
196 s
->timer
= ptimer_init(m5208_timer_trigger
, s
, PTIMER_POLICY_DEFAULT
);
197 memory_region_init_io(&s
->iomem
, NULL
, &m5208_timer_ops
, s
,
198 "m5208-timer", 0x00004000);
199 memory_region_add_subregion(address_space
, 0xfc080000 + 0x4000 * i
,
205 static void mcf_fec_init(MemoryRegion
*sysmem
, NICInfo
*nd
, hwaddr base
,
212 qemu_check_nic_model(nd
, TYPE_MCF_FEC_NET
);
213 dev
= qdev_create(NULL
, TYPE_MCF_FEC_NET
);
214 qdev_set_nic_properties(dev
, nd
);
215 qdev_init_nofail(dev
);
217 s
= SYS_BUS_DEVICE(dev
);
218 for (i
= 0; i
< FEC_NUM_IRQ
; i
++) {
219 sysbus_connect_irq(s
, i
, irqs
[i
]);
222 memory_region_add_subregion(sysmem
, base
, sysbus_mmio_get_region(s
, 0));
225 static void mcf5208evb_init(MachineState
*machine
)
227 ram_addr_t ram_size
= machine
->ram_size
;
228 const char *kernel_filename
= machine
->kernel_filename
;
235 MemoryRegion
*address_space_mem
= get_system_memory();
236 MemoryRegion
*rom
= g_new(MemoryRegion
, 1);
237 MemoryRegion
*ram
= g_new(MemoryRegion
, 1);
238 MemoryRegion
*sram
= g_new(MemoryRegion
, 1);
240 cpu
= M68K_CPU(cpu_create(machine
->cpu_type
));
243 /* Initialize CPU registers. */
245 /* TODO: Configure BARs. */
247 /* ROM at 0x00000000 */
248 memory_region_init_rom(rom
, NULL
, "mcf5208.rom", ROM_SIZE
, &error_fatal
);
249 memory_region_add_subregion(address_space_mem
, 0x00000000, rom
);
251 /* DRAM at 0x40000000 */
252 memory_region_allocate_system_memory(ram
, NULL
, "mcf5208.ram", ram_size
);
253 memory_region_add_subregion(address_space_mem
, 0x40000000, ram
);
256 memory_region_init_ram(sram
, NULL
, "mcf5208.sram", 16 * KiB
, &error_fatal
);
257 memory_region_add_subregion(address_space_mem
, 0x80000000, sram
);
259 /* Internal peripherals. */
260 pic
= mcf_intc_init(address_space_mem
, 0xfc048000, cpu
);
262 mcf_uart_mm_init(0xfc060000, pic
[26], serial_hd(0));
263 mcf_uart_mm_init(0xfc064000, pic
[27], serial_hd(1));
264 mcf_uart_mm_init(0xfc068000, pic
[28], serial_hd(2));
266 mcf5208_sys_init(address_space_mem
, pic
);
269 error_report("Too many NICs");
272 if (nd_table
[0].used
) {
273 mcf_fec_init(address_space_mem
, &nd_table
[0],
274 0xfc030000, pic
+ 36);
279 /* 0xfc000000 SCM. */
280 /* 0xfc004000 XBS. */
281 /* 0xfc008000 FlexBus CS. */
282 /* 0xfc030000 FEC. */
283 /* 0xfc040000 SCM + Power management. */
284 /* 0xfc044000 eDMA. */
285 /* 0xfc048000 INTC. */
286 /* 0xfc058000 I2C. */
287 /* 0xfc05c000 QSPI. */
288 /* 0xfc060000 UART0. */
289 /* 0xfc064000 UART0. */
290 /* 0xfc068000 UART0. */
291 /* 0xfc070000 DMA timers. */
292 /* 0xfc080000 PIT0. */
293 /* 0xfc084000 PIT1. */
294 /* 0xfc088000 EPORT. */
295 /* 0xfc08c000 Watchdog. */
296 /* 0xfc090000 clock module. */
297 /* 0xfc0a0000 CCM + reset. */
298 /* 0xfc0a4000 GPIO. */
299 /* 0xfc0a8000 SDRAM controller. */
306 fn
= qemu_find_file(QEMU_FILE_TYPE_BIOS
, bios_name
);
308 error_report("Could not find ROM image '%s'", bios_name
);
311 if (load_image_targphys(fn
, 0x0, ROM_SIZE
) < 8) {
312 error_report("Could not load ROM image '%s'", bios_name
);
316 /* Initial PC is always at offset 4 in firmware binaries */
317 ptr
= rom_ptr(0x4, 4);
319 env
->pc
= ldl_p(ptr
);
323 if (!kernel_filename
) {
324 if (qtest_enabled() || bios_name
) {
327 error_report("Kernel image must be specified");
331 kernel_size
= load_elf(kernel_filename
, NULL
, NULL
, NULL
, &elf_entry
,
332 NULL
, NULL
, 1, EM_68K
, 0, 0);
334 if (kernel_size
< 0) {
335 kernel_size
= load_uimage(kernel_filename
, &entry
, NULL
, NULL
,
338 if (kernel_size
< 0) {
339 kernel_size
= load_image_targphys(kernel_filename
, 0x40000000,
343 if (kernel_size
< 0) {
344 error_report("Could not load kernel '%s'", kernel_filename
);
351 static void mcf5208evb_machine_init(MachineClass
*mc
)
353 mc
->desc
= "MCF5208EVB";
354 mc
->init
= mcf5208evb_init
;
356 mc
->default_cpu_type
= M68K_CPU_TYPE_NAME("m5208");
359 DEFINE_MACHINE("mcf5208evb", mcf5208evb_machine_init
)