2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "block/qapi.h"
36 #include "qmp-commands.h"
37 #include "qemu/timer.h"
40 #include <sys/types.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
53 struct BdrvDirtyBitmap
{
55 QLIST_ENTRY(BdrvDirtyBitmap
) list
;
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
60 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
);
61 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
62 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
63 BlockDriverCompletionFunc
*cb
, void *opaque
);
64 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
65 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
66 BlockDriverCompletionFunc
*cb
, void *opaque
);
67 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
68 int64_t sector_num
, int nb_sectors
,
70 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
71 int64_t sector_num
, int nb_sectors
,
73 static int coroutine_fn
bdrv_co_do_preadv(BlockDriverState
*bs
,
74 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
75 BdrvRequestFlags flags
);
76 static int coroutine_fn
bdrv_co_do_pwritev(BlockDriverState
*bs
,
77 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
78 BdrvRequestFlags flags
);
79 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
83 BdrvRequestFlags flags
,
84 BlockDriverCompletionFunc
*cb
,
87 static void coroutine_fn
bdrv_co_do_rw(void *opaque
);
88 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
89 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
);
91 static QTAILQ_HEAD(, BlockDriverState
) bdrv_states
=
92 QTAILQ_HEAD_INITIALIZER(bdrv_states
);
94 static QTAILQ_HEAD(, BlockDriverState
) graph_bdrv_states
=
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states
);
97 static QLIST_HEAD(, BlockDriver
) bdrv_drivers
=
98 QLIST_HEAD_INITIALIZER(bdrv_drivers
);
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist
;
104 static int is_windows_drive_prefix(const char *filename
)
106 return (((filename
[0] >= 'a' && filename
[0] <= 'z') ||
107 (filename
[0] >= 'A' && filename
[0] <= 'Z')) &&
111 int is_windows_drive(const char *filename
)
113 if (is_windows_drive_prefix(filename
) &&
116 if (strstart(filename
, "\\\\.\\", NULL
) ||
117 strstart(filename
, "//./", NULL
))
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState
*bs
,
129 throttle_config(&bs
->throttle_state
, cfg
);
131 for (i
= 0; i
< 2; i
++) {
132 qemu_co_enter_next(&bs
->throttled_reqs
[i
]);
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState
*bs
)
139 bool drained
= false;
140 bool enabled
= bs
->io_limits_enabled
;
143 bs
->io_limits_enabled
= false;
145 for (i
= 0; i
< 2; i
++) {
146 while (qemu_co_enter_next(&bs
->throttled_reqs
[i
])) {
151 bs
->io_limits_enabled
= enabled
;
156 void bdrv_io_limits_disable(BlockDriverState
*bs
)
158 bs
->io_limits_enabled
= false;
160 bdrv_start_throttled_reqs(bs
);
162 throttle_destroy(&bs
->throttle_state
);
165 static void bdrv_throttle_read_timer_cb(void *opaque
)
167 BlockDriverState
*bs
= opaque
;
168 qemu_co_enter_next(&bs
->throttled_reqs
[0]);
171 static void bdrv_throttle_write_timer_cb(void *opaque
)
173 BlockDriverState
*bs
= opaque
;
174 qemu_co_enter_next(&bs
->throttled_reqs
[1]);
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState
*bs
)
180 assert(!bs
->io_limits_enabled
);
181 throttle_init(&bs
->throttle_state
,
182 bdrv_get_aio_context(bs
),
184 bdrv_throttle_read_timer_cb
,
185 bdrv_throttle_write_timer_cb
,
187 bs
->io_limits_enabled
= true;
190 /* This function makes an IO wait if needed
192 * @nb_sectors: the number of sectors of the IO
193 * @is_write: is the IO a write
195 static void bdrv_io_limits_intercept(BlockDriverState
*bs
,
199 /* does this io must wait */
200 bool must_wait
= throttle_schedule_timer(&bs
->throttle_state
, is_write
);
202 /* if must wait or any request of this type throttled queue the IO */
204 !qemu_co_queue_empty(&bs
->throttled_reqs
[is_write
])) {
205 qemu_co_queue_wait(&bs
->throttled_reqs
[is_write
]);
208 /* the IO will be executed, do the accounting */
209 throttle_account(&bs
->throttle_state
, is_write
, bytes
);
212 /* if the next request must wait -> do nothing */
213 if (throttle_schedule_timer(&bs
->throttle_state
, is_write
)) {
217 /* else queue next request for execution */
218 qemu_co_queue_next(&bs
->throttled_reqs
[is_write
]);
221 size_t bdrv_opt_mem_align(BlockDriverState
*bs
)
223 if (!bs
|| !bs
->drv
) {
224 /* 4k should be on the safe side */
228 return bs
->bl
.opt_mem_alignment
;
231 /* check if the path starts with "<protocol>:" */
232 static int path_has_protocol(const char *path
)
237 if (is_windows_drive(path
) ||
238 is_windows_drive_prefix(path
)) {
241 p
= path
+ strcspn(path
, ":/\\");
243 p
= path
+ strcspn(path
, ":/");
249 int path_is_absolute(const char *path
)
252 /* specific case for names like: "\\.\d:" */
253 if (is_windows_drive(path
) || is_windows_drive_prefix(path
)) {
256 return (*path
== '/' || *path
== '\\');
258 return (*path
== '/');
262 /* if filename is absolute, just copy it to dest. Otherwise, build a
263 path to it by considering it is relative to base_path. URL are
265 void path_combine(char *dest
, int dest_size
,
266 const char *base_path
,
267 const char *filename
)
274 if (path_is_absolute(filename
)) {
275 pstrcpy(dest
, dest_size
, filename
);
277 p
= strchr(base_path
, ':');
282 p1
= strrchr(base_path
, '/');
286 p2
= strrchr(base_path
, '\\');
298 if (len
> dest_size
- 1)
300 memcpy(dest
, base_path
, len
);
302 pstrcat(dest
, dest_size
, filename
);
306 void bdrv_get_full_backing_filename(BlockDriverState
*bs
, char *dest
, size_t sz
)
308 if (bs
->backing_file
[0] == '\0' || path_has_protocol(bs
->backing_file
)) {
309 pstrcpy(dest
, sz
, bs
->backing_file
);
311 path_combine(dest
, sz
, bs
->filename
, bs
->backing_file
);
315 void bdrv_register(BlockDriver
*bdrv
)
317 /* Block drivers without coroutine functions need emulation */
318 if (!bdrv
->bdrv_co_readv
) {
319 bdrv
->bdrv_co_readv
= bdrv_co_readv_em
;
320 bdrv
->bdrv_co_writev
= bdrv_co_writev_em
;
322 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
323 * the block driver lacks aio we need to emulate that too.
325 if (!bdrv
->bdrv_aio_readv
) {
326 /* add AIO emulation layer */
327 bdrv
->bdrv_aio_readv
= bdrv_aio_readv_em
;
328 bdrv
->bdrv_aio_writev
= bdrv_aio_writev_em
;
332 QLIST_INSERT_HEAD(&bdrv_drivers
, bdrv
, list
);
335 /* create a new block device (by default it is empty) */
336 BlockDriverState
*bdrv_new(const char *device_name
, Error
**errp
)
338 BlockDriverState
*bs
;
341 if (bdrv_find(device_name
)) {
342 error_setg(errp
, "Device with id '%s' already exists",
346 if (bdrv_find_node(device_name
)) {
347 error_setg(errp
, "Device with node-name '%s' already exists",
352 bs
= g_malloc0(sizeof(BlockDriverState
));
353 QLIST_INIT(&bs
->dirty_bitmaps
);
354 pstrcpy(bs
->device_name
, sizeof(bs
->device_name
), device_name
);
355 if (device_name
[0] != '\0') {
356 QTAILQ_INSERT_TAIL(&bdrv_states
, bs
, device_list
);
358 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
359 QLIST_INIT(&bs
->op_blockers
[i
]);
361 bdrv_iostatus_disable(bs
);
362 notifier_list_init(&bs
->close_notifiers
);
363 notifier_with_return_list_init(&bs
->before_write_notifiers
);
364 qemu_co_queue_init(&bs
->throttled_reqs
[0]);
365 qemu_co_queue_init(&bs
->throttled_reqs
[1]);
367 bs
->aio_context
= qemu_get_aio_context();
372 void bdrv_add_close_notifier(BlockDriverState
*bs
, Notifier
*notify
)
374 notifier_list_add(&bs
->close_notifiers
, notify
);
377 BlockDriver
*bdrv_find_format(const char *format_name
)
380 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
381 if (!strcmp(drv1
->format_name
, format_name
)) {
388 static int bdrv_is_whitelisted(BlockDriver
*drv
, bool read_only
)
390 static const char *whitelist_rw
[] = {
391 CONFIG_BDRV_RW_WHITELIST
393 static const char *whitelist_ro
[] = {
394 CONFIG_BDRV_RO_WHITELIST
398 if (!whitelist_rw
[0] && !whitelist_ro
[0]) {
399 return 1; /* no whitelist, anything goes */
402 for (p
= whitelist_rw
; *p
; p
++) {
403 if (!strcmp(drv
->format_name
, *p
)) {
408 for (p
= whitelist_ro
; *p
; p
++) {
409 if (!strcmp(drv
->format_name
, *p
)) {
417 BlockDriver
*bdrv_find_whitelisted_format(const char *format_name
,
420 BlockDriver
*drv
= bdrv_find_format(format_name
);
421 return drv
&& bdrv_is_whitelisted(drv
, read_only
) ? drv
: NULL
;
424 typedef struct CreateCo
{
427 QEMUOptionParameter
*options
;
432 static void coroutine_fn
bdrv_create_co_entry(void *opaque
)
434 Error
*local_err
= NULL
;
437 CreateCo
*cco
= opaque
;
440 ret
= cco
->drv
->bdrv_create(cco
->filename
, cco
->options
, &local_err
);
442 error_propagate(&cco
->err
, local_err
);
447 int bdrv_create(BlockDriver
*drv
, const char* filename
,
448 QEMUOptionParameter
*options
, Error
**errp
)
455 .filename
= g_strdup(filename
),
461 if (!drv
->bdrv_create
) {
462 error_setg(errp
, "Driver '%s' does not support image creation", drv
->format_name
);
467 if (qemu_in_coroutine()) {
468 /* Fast-path if already in coroutine context */
469 bdrv_create_co_entry(&cco
);
471 co
= qemu_coroutine_create(bdrv_create_co_entry
);
472 qemu_coroutine_enter(co
, &cco
);
473 while (cco
.ret
== NOT_DONE
) {
481 error_propagate(errp
, cco
.err
);
483 error_setg_errno(errp
, -ret
, "Could not create image");
488 g_free(cco
.filename
);
492 int bdrv_create_file(const char* filename
, QEMUOptionParameter
*options
,
496 Error
*local_err
= NULL
;
499 drv
= bdrv_find_protocol(filename
, true);
501 error_setg(errp
, "Could not find protocol for file '%s'", filename
);
505 ret
= bdrv_create(drv
, filename
, options
, &local_err
);
507 error_propagate(errp
, local_err
);
512 int bdrv_refresh_limits(BlockDriverState
*bs
)
514 BlockDriver
*drv
= bs
->drv
;
516 memset(&bs
->bl
, 0, sizeof(bs
->bl
));
522 /* Take some limits from the children as a default */
524 bdrv_refresh_limits(bs
->file
);
525 bs
->bl
.opt_transfer_length
= bs
->file
->bl
.opt_transfer_length
;
526 bs
->bl
.opt_mem_alignment
= bs
->file
->bl
.opt_mem_alignment
;
528 bs
->bl
.opt_mem_alignment
= 512;
531 if (bs
->backing_hd
) {
532 bdrv_refresh_limits(bs
->backing_hd
);
533 bs
->bl
.opt_transfer_length
=
534 MAX(bs
->bl
.opt_transfer_length
,
535 bs
->backing_hd
->bl
.opt_transfer_length
);
536 bs
->bl
.opt_mem_alignment
=
537 MAX(bs
->bl
.opt_mem_alignment
,
538 bs
->backing_hd
->bl
.opt_mem_alignment
);
541 /* Then let the driver override it */
542 if (drv
->bdrv_refresh_limits
) {
543 return drv
->bdrv_refresh_limits(bs
);
550 * Create a uniquely-named empty temporary file.
551 * Return 0 upon success, otherwise a negative errno value.
553 int get_tmp_filename(char *filename
, int size
)
556 char temp_dir
[MAX_PATH
];
557 /* GetTempFileName requires that its output buffer (4th param)
558 have length MAX_PATH or greater. */
559 assert(size
>= MAX_PATH
);
560 return (GetTempPath(MAX_PATH
, temp_dir
)
561 && GetTempFileName(temp_dir
, "qem", 0, filename
)
562 ? 0 : -GetLastError());
566 tmpdir
= getenv("TMPDIR");
570 if (snprintf(filename
, size
, "%s/vl.XXXXXX", tmpdir
) >= size
) {
573 fd
= mkstemp(filename
);
577 if (close(fd
) != 0) {
586 * Detect host devices. By convention, /dev/cdrom[N] is always
587 * recognized as a host CDROM.
589 static BlockDriver
*find_hdev_driver(const char *filename
)
591 int score_max
= 0, score
;
592 BlockDriver
*drv
= NULL
, *d
;
594 QLIST_FOREACH(d
, &bdrv_drivers
, list
) {
595 if (d
->bdrv_probe_device
) {
596 score
= d
->bdrv_probe_device(filename
);
597 if (score
> score_max
) {
607 BlockDriver
*bdrv_find_protocol(const char *filename
,
608 bool allow_protocol_prefix
)
615 /* TODO Drivers without bdrv_file_open must be specified explicitly */
618 * XXX(hch): we really should not let host device detection
619 * override an explicit protocol specification, but moving this
620 * later breaks access to device names with colons in them.
621 * Thanks to the brain-dead persistent naming schemes on udev-
622 * based Linux systems those actually are quite common.
624 drv1
= find_hdev_driver(filename
);
629 if (!path_has_protocol(filename
) || !allow_protocol_prefix
) {
630 return bdrv_find_format("file");
633 p
= strchr(filename
, ':');
636 if (len
> sizeof(protocol
) - 1)
637 len
= sizeof(protocol
) - 1;
638 memcpy(protocol
, filename
, len
);
639 protocol
[len
] = '\0';
640 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
641 if (drv1
->protocol_name
&&
642 !strcmp(drv1
->protocol_name
, protocol
)) {
649 static int find_image_format(BlockDriverState
*bs
, const char *filename
,
650 BlockDriver
**pdrv
, Error
**errp
)
652 int score
, score_max
;
653 BlockDriver
*drv1
, *drv
;
657 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
658 if (bs
->sg
|| !bdrv_is_inserted(bs
) || bdrv_getlength(bs
) == 0) {
659 drv
= bdrv_find_format("raw");
661 error_setg(errp
, "Could not find raw image format");
668 ret
= bdrv_pread(bs
, 0, buf
, sizeof(buf
));
670 error_setg_errno(errp
, -ret
, "Could not read image for determining its "
678 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
679 if (drv1
->bdrv_probe
) {
680 score
= drv1
->bdrv_probe(buf
, ret
, filename
);
681 if (score
> score_max
) {
688 error_setg(errp
, "Could not determine image format: No compatible "
697 * Set the current 'total_sectors' value
699 static int refresh_total_sectors(BlockDriverState
*bs
, int64_t hint
)
701 BlockDriver
*drv
= bs
->drv
;
703 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
707 /* query actual device if possible, otherwise just trust the hint */
708 if (drv
->bdrv_getlength
) {
709 int64_t length
= drv
->bdrv_getlength(bs
);
713 hint
= DIV_ROUND_UP(length
, BDRV_SECTOR_SIZE
);
716 bs
->total_sectors
= hint
;
721 * Set open flags for a given discard mode
723 * Return 0 on success, -1 if the discard mode was invalid.
725 int bdrv_parse_discard_flags(const char *mode
, int *flags
)
727 *flags
&= ~BDRV_O_UNMAP
;
729 if (!strcmp(mode
, "off") || !strcmp(mode
, "ignore")) {
731 } else if (!strcmp(mode
, "on") || !strcmp(mode
, "unmap")) {
732 *flags
|= BDRV_O_UNMAP
;
741 * Set open flags for a given cache mode
743 * Return 0 on success, -1 if the cache mode was invalid.
745 int bdrv_parse_cache_flags(const char *mode
, int *flags
)
747 *flags
&= ~BDRV_O_CACHE_MASK
;
749 if (!strcmp(mode
, "off") || !strcmp(mode
, "none")) {
750 *flags
|= BDRV_O_NOCACHE
| BDRV_O_CACHE_WB
;
751 } else if (!strcmp(mode
, "directsync")) {
752 *flags
|= BDRV_O_NOCACHE
;
753 } else if (!strcmp(mode
, "writeback")) {
754 *flags
|= BDRV_O_CACHE_WB
;
755 } else if (!strcmp(mode
, "unsafe")) {
756 *flags
|= BDRV_O_CACHE_WB
;
757 *flags
|= BDRV_O_NO_FLUSH
;
758 } else if (!strcmp(mode
, "writethrough")) {
759 /* this is the default */
768 * The copy-on-read flag is actually a reference count so multiple users may
769 * use the feature without worrying about clobbering its previous state.
770 * Copy-on-read stays enabled until all users have called to disable it.
772 void bdrv_enable_copy_on_read(BlockDriverState
*bs
)
777 void bdrv_disable_copy_on_read(BlockDriverState
*bs
)
779 assert(bs
->copy_on_read
> 0);
784 * Returns the flags that a temporary snapshot should get, based on the
785 * originally requested flags (the originally requested image will have flags
786 * like a backing file)
788 static int bdrv_temp_snapshot_flags(int flags
)
790 return (flags
& ~BDRV_O_SNAPSHOT
) | BDRV_O_TEMPORARY
;
794 * Returns the flags that bs->file should get, based on the given flags for
797 static int bdrv_inherited_flags(int flags
)
799 /* Enable protocol handling, disable format probing for bs->file */
800 flags
|= BDRV_O_PROTOCOL
;
802 /* Our block drivers take care to send flushes and respect unmap policy,
803 * so we can enable both unconditionally on lower layers. */
804 flags
|= BDRV_O_CACHE_WB
| BDRV_O_UNMAP
;
806 /* Clear flags that only apply to the top layer */
807 flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
| BDRV_O_COPY_ON_READ
);
813 * Returns the flags that bs->backing_hd should get, based on the given flags
816 static int bdrv_backing_flags(int flags
)
818 /* backing files always opened read-only */
819 flags
&= ~(BDRV_O_RDWR
| BDRV_O_COPY_ON_READ
);
821 /* snapshot=on is handled on the top layer */
822 flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_TEMPORARY
);
827 static int bdrv_open_flags(BlockDriverState
*bs
, int flags
)
829 int open_flags
= flags
| BDRV_O_CACHE_WB
;
832 * Clear flags that are internal to the block layer before opening the
835 open_flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
838 * Snapshots should be writable.
840 if (flags
& BDRV_O_TEMPORARY
) {
841 open_flags
|= BDRV_O_RDWR
;
847 static void bdrv_assign_node_name(BlockDriverState
*bs
,
848 const char *node_name
,
855 /* empty string node name is invalid */
856 if (node_name
[0] == '\0') {
857 error_setg(errp
, "Empty node name");
861 /* takes care of avoiding namespaces collisions */
862 if (bdrv_find(node_name
)) {
863 error_setg(errp
, "node-name=%s is conflicting with a device id",
868 /* takes care of avoiding duplicates node names */
869 if (bdrv_find_node(node_name
)) {
870 error_setg(errp
, "Duplicate node name");
874 /* copy node name into the bs and insert it into the graph list */
875 pstrcpy(bs
->node_name
, sizeof(bs
->node_name
), node_name
);
876 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs
, node_list
);
880 * Common part for opening disk images and files
882 * Removes all processed options from *options.
884 static int bdrv_open_common(BlockDriverState
*bs
, BlockDriverState
*file
,
885 QDict
*options
, int flags
, BlockDriver
*drv
, Error
**errp
)
888 const char *filename
;
889 const char *node_name
= NULL
;
890 Error
*local_err
= NULL
;
893 assert(bs
->file
== NULL
);
894 assert(options
!= NULL
&& bs
->options
!= options
);
897 filename
= file
->filename
;
899 filename
= qdict_get_try_str(options
, "filename");
902 if (drv
->bdrv_needs_filename
&& !filename
) {
903 error_setg(errp
, "The '%s' block driver requires a file name",
908 trace_bdrv_open_common(bs
, filename
?: "", flags
, drv
->format_name
);
910 node_name
= qdict_get_try_str(options
, "node-name");
911 bdrv_assign_node_name(bs
, node_name
, &local_err
);
913 error_propagate(errp
, local_err
);
916 qdict_del(options
, "node-name");
918 /* bdrv_open() with directly using a protocol as drv. This layer is already
919 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
920 * and return immediately. */
921 if (file
!= NULL
&& drv
->bdrv_file_open
) {
926 bs
->open_flags
= flags
;
927 bs
->guest_block_size
= 512;
928 bs
->request_alignment
= 512;
929 bs
->zero_beyond_eof
= true;
930 open_flags
= bdrv_open_flags(bs
, flags
);
931 bs
->read_only
= !(open_flags
& BDRV_O_RDWR
);
933 if (use_bdrv_whitelist
&& !bdrv_is_whitelisted(drv
, bs
->read_only
)) {
935 !bs
->read_only
&& bdrv_is_whitelisted(drv
, true)
936 ? "Driver '%s' can only be used for read-only devices"
937 : "Driver '%s' is not whitelisted",
942 assert(bs
->copy_on_read
== 0); /* bdrv_new() and bdrv_close() make it so */
943 if (flags
& BDRV_O_COPY_ON_READ
) {
944 if (!bs
->read_only
) {
945 bdrv_enable_copy_on_read(bs
);
947 error_setg(errp
, "Can't use copy-on-read on read-only device");
952 if (filename
!= NULL
) {
953 pstrcpy(bs
->filename
, sizeof(bs
->filename
), filename
);
955 bs
->filename
[0] = '\0';
959 bs
->opaque
= g_malloc0(drv
->instance_size
);
961 bs
->enable_write_cache
= !!(flags
& BDRV_O_CACHE_WB
);
963 /* Open the image, either directly or using a protocol */
964 if (drv
->bdrv_file_open
) {
965 assert(file
== NULL
);
966 assert(!drv
->bdrv_needs_filename
|| filename
!= NULL
);
967 ret
= drv
->bdrv_file_open(bs
, options
, open_flags
, &local_err
);
970 error_setg(errp
, "Can't use '%s' as a block driver for the "
971 "protocol level", drv
->format_name
);
976 ret
= drv
->bdrv_open(bs
, options
, open_flags
, &local_err
);
981 error_propagate(errp
, local_err
);
982 } else if (bs
->filename
[0]) {
983 error_setg_errno(errp
, -ret
, "Could not open '%s'", bs
->filename
);
985 error_setg_errno(errp
, -ret
, "Could not open image");
990 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
992 error_setg_errno(errp
, -ret
, "Could not refresh total sector count");
996 bdrv_refresh_limits(bs
);
997 assert(bdrv_opt_mem_align(bs
) != 0);
998 assert((bs
->request_alignment
!= 0) || bs
->sg
);
1010 * Opens a file using a protocol (file, host_device, nbd, ...)
1012 * options is an indirect pointer to a QDict of options to pass to the block
1013 * drivers, or pointer to NULL for an empty set of options. If this function
1014 * takes ownership of the QDict reference, it will set *options to NULL;
1015 * otherwise, it will contain unused/unrecognized options after this function
1016 * returns. Then, the caller is responsible for freeing it. If it intends to
1017 * reuse the QDict, QINCREF() should be called beforehand.
1019 static int bdrv_file_open(BlockDriverState
*bs
, const char *filename
,
1020 QDict
**options
, int flags
, Error
**errp
)
1023 const char *drvname
;
1024 bool parse_filename
= false;
1025 Error
*local_err
= NULL
;
1028 /* Fetch the file name from the options QDict if necessary */
1030 filename
= qdict_get_try_str(*options
, "filename");
1031 } else if (filename
&& !qdict_haskey(*options
, "filename")) {
1032 qdict_put(*options
, "filename", qstring_from_str(filename
));
1033 parse_filename
= true;
1035 error_setg(errp
, "Can't specify 'file' and 'filename' options at the "
1041 /* Find the right block driver */
1042 drvname
= qdict_get_try_str(*options
, "driver");
1044 drv
= bdrv_find_format(drvname
);
1046 error_setg(errp
, "Unknown driver '%s'", drvname
);
1048 qdict_del(*options
, "driver");
1049 } else if (filename
) {
1050 drv
= bdrv_find_protocol(filename
, parse_filename
);
1052 error_setg(errp
, "Unknown protocol");
1055 error_setg(errp
, "Must specify either driver or file");
1060 /* errp has been set already */
1065 /* Parse the filename and open it */
1066 if (drv
->bdrv_parse_filename
&& parse_filename
) {
1067 drv
->bdrv_parse_filename(filename
, *options
, &local_err
);
1069 error_propagate(errp
, local_err
);
1074 if (!drv
->bdrv_needs_filename
) {
1075 qdict_del(*options
, "filename");
1077 filename
= qdict_get_str(*options
, "filename");
1081 if (!drv
->bdrv_file_open
) {
1082 ret
= bdrv_open(&bs
, filename
, NULL
, *options
, flags
, drv
, &local_err
);
1085 ret
= bdrv_open_common(bs
, NULL
, *options
, flags
, drv
, &local_err
);
1088 error_propagate(errp
, local_err
);
1099 void bdrv_set_backing_hd(BlockDriverState
*bs
, BlockDriverState
*backing_hd
)
1102 if (bs
->backing_hd
) {
1103 assert(bs
->backing_blocker
);
1104 bdrv_op_unblock_all(bs
->backing_hd
, bs
->backing_blocker
);
1105 } else if (backing_hd
) {
1106 error_setg(&bs
->backing_blocker
,
1107 "device is used as backing hd of '%s'",
1111 bs
->backing_hd
= backing_hd
;
1113 error_free(bs
->backing_blocker
);
1114 bs
->backing_blocker
= NULL
;
1117 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
1118 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_hd
->filename
);
1119 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
),
1120 backing_hd
->drv
? backing_hd
->drv
->format_name
: "");
1122 bdrv_op_block_all(bs
->backing_hd
, bs
->backing_blocker
);
1123 /* Otherwise we won't be able to commit due to check in bdrv_commit */
1124 bdrv_op_unblock(bs
->backing_hd
, BLOCK_OP_TYPE_COMMIT
,
1125 bs
->backing_blocker
);
1127 bdrv_refresh_limits(bs
);
1131 * Opens the backing file for a BlockDriverState if not yet open
1133 * options is a QDict of options to pass to the block drivers, or NULL for an
1134 * empty set of options. The reference to the QDict is transferred to this
1135 * function (even on failure), so if the caller intends to reuse the dictionary,
1136 * it needs to use QINCREF() before calling bdrv_file_open.
1138 int bdrv_open_backing_file(BlockDriverState
*bs
, QDict
*options
, Error
**errp
)
1140 char *backing_filename
= g_malloc0(PATH_MAX
);
1142 BlockDriver
*back_drv
= NULL
;
1143 BlockDriverState
*backing_hd
;
1144 Error
*local_err
= NULL
;
1146 if (bs
->backing_hd
!= NULL
) {
1151 /* NULL means an empty set of options */
1152 if (options
== NULL
) {
1153 options
= qdict_new();
1156 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
1157 if (qdict_haskey(options
, "file.filename")) {
1158 backing_filename
[0] = '\0';
1159 } else if (bs
->backing_file
[0] == '\0' && qdict_size(options
) == 0) {
1163 bdrv_get_full_backing_filename(bs
, backing_filename
, PATH_MAX
);
1166 backing_hd
= bdrv_new("", errp
);
1168 if (bs
->backing_format
[0] != '\0') {
1169 back_drv
= bdrv_find_format(bs
->backing_format
);
1172 assert(bs
->backing_hd
== NULL
);
1173 ret
= bdrv_open(&backing_hd
,
1174 *backing_filename
? backing_filename
: NULL
, NULL
, options
,
1175 bdrv_backing_flags(bs
->open_flags
), back_drv
, &local_err
);
1177 bdrv_unref(backing_hd
);
1179 bs
->open_flags
|= BDRV_O_NO_BACKING
;
1180 error_setg(errp
, "Could not open backing file: %s",
1181 error_get_pretty(local_err
));
1182 error_free(local_err
);
1185 bdrv_set_backing_hd(bs
, backing_hd
);
1188 g_free(backing_filename
);
1193 * Opens a disk image whose options are given as BlockdevRef in another block
1196 * If allow_none is true, no image will be opened if filename is false and no
1197 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1199 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1200 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1201 * itself, all options starting with "${bdref_key}." are considered part of the
1204 * The BlockdevRef will be removed from the options QDict.
1206 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1208 int bdrv_open_image(BlockDriverState
**pbs
, const char *filename
,
1209 QDict
*options
, const char *bdref_key
, int flags
,
1210 bool allow_none
, Error
**errp
)
1212 QDict
*image_options
;
1214 char *bdref_key_dot
;
1215 const char *reference
;
1218 assert(*pbs
== NULL
);
1220 bdref_key_dot
= g_strdup_printf("%s.", bdref_key
);
1221 qdict_extract_subqdict(options
, &image_options
, bdref_key_dot
);
1222 g_free(bdref_key_dot
);
1224 reference
= qdict_get_try_str(options
, bdref_key
);
1225 if (!filename
&& !reference
&& !qdict_size(image_options
)) {
1229 error_setg(errp
, "A block device must be specified for \"%s\"",
1233 QDECREF(image_options
);
1237 ret
= bdrv_open(pbs
, filename
, reference
, image_options
, flags
, NULL
, errp
);
1240 qdict_del(options
, bdref_key
);
1244 void bdrv_append_temp_snapshot(BlockDriverState
*bs
, int flags
, Error
**errp
)
1246 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1247 char *tmp_filename
= g_malloc0(PATH_MAX
+ 1);
1249 BlockDriver
*bdrv_qcow2
;
1250 QEMUOptionParameter
*create_options
;
1251 QDict
*snapshot_options
;
1252 BlockDriverState
*bs_snapshot
;
1256 /* if snapshot, we create a temporary backing file and open it
1257 instead of opening 'filename' directly */
1259 /* Get the required size from the image */
1260 total_size
= bdrv_getlength(bs
);
1261 if (total_size
< 0) {
1262 error_setg_errno(errp
, -total_size
, "Could not get image size");
1265 total_size
&= BDRV_SECTOR_MASK
;
1267 /* Create the temporary image */
1268 ret
= get_tmp_filename(tmp_filename
, PATH_MAX
+ 1);
1270 error_setg_errno(errp
, -ret
, "Could not get temporary filename");
1274 bdrv_qcow2
= bdrv_find_format("qcow2");
1275 create_options
= parse_option_parameters("", bdrv_qcow2
->create_options
,
1278 set_option_parameter_int(create_options
, BLOCK_OPT_SIZE
, total_size
);
1280 ret
= bdrv_create(bdrv_qcow2
, tmp_filename
, create_options
, &local_err
);
1281 free_option_parameters(create_options
);
1283 error_setg_errno(errp
, -ret
, "Could not create temporary overlay "
1284 "'%s': %s", tmp_filename
,
1285 error_get_pretty(local_err
));
1286 error_free(local_err
);
1290 /* Prepare a new options QDict for the temporary file */
1291 snapshot_options
= qdict_new();
1292 qdict_put(snapshot_options
, "file.driver",
1293 qstring_from_str("file"));
1294 qdict_put(snapshot_options
, "file.filename",
1295 qstring_from_str(tmp_filename
));
1297 bs_snapshot
= bdrv_new("", &error_abort
);
1299 ret
= bdrv_open(&bs_snapshot
, NULL
, NULL
, snapshot_options
,
1300 flags
, bdrv_qcow2
, &local_err
);
1302 error_propagate(errp
, local_err
);
1306 bdrv_append(bs_snapshot
, bs
);
1309 g_free(tmp_filename
);
1312 static QDict
*parse_json_filename(const char *filename
, Error
**errp
)
1314 QObject
*options_obj
;
1318 ret
= strstart(filename
, "json:", &filename
);
1321 options_obj
= qobject_from_json(filename
);
1323 error_setg(errp
, "Could not parse the JSON options");
1327 if (qobject_type(options_obj
) != QTYPE_QDICT
) {
1328 qobject_decref(options_obj
);
1329 error_setg(errp
, "Invalid JSON object given");
1333 options
= qobject_to_qdict(options_obj
);
1334 qdict_flatten(options
);
1340 * Opens a disk image (raw, qcow2, vmdk, ...)
1342 * options is a QDict of options to pass to the block drivers, or NULL for an
1343 * empty set of options. The reference to the QDict belongs to the block layer
1344 * after the call (even on failure), so if the caller intends to reuse the
1345 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1347 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1348 * If it is not NULL, the referenced BDS will be reused.
1350 * The reference parameter may be used to specify an existing block device which
1351 * should be opened. If specified, neither options nor a filename may be given,
1352 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1354 int bdrv_open(BlockDriverState
**pbs
, const char *filename
,
1355 const char *reference
, QDict
*options
, int flags
,
1356 BlockDriver
*drv
, Error
**errp
)
1359 BlockDriverState
*file
= NULL
, *bs
;
1360 const char *drvname
;
1361 Error
*local_err
= NULL
;
1362 int snapshot_flags
= 0;
1367 bool options_non_empty
= options
? qdict_size(options
) : false;
1371 error_setg(errp
, "Cannot reuse an existing BDS when referencing "
1372 "another block device");
1376 if (filename
|| options_non_empty
) {
1377 error_setg(errp
, "Cannot reference an existing block device with "
1378 "additional options or a new filename");
1382 bs
= bdrv_lookup_bs(reference
, reference
, errp
);
1394 bs
= bdrv_new("", &error_abort
);
1397 /* NULL means an empty set of options */
1398 if (options
== NULL
) {
1399 options
= qdict_new();
1402 if (filename
&& g_str_has_prefix(filename
, "json:")) {
1403 QDict
*json_options
= parse_json_filename(filename
, &local_err
);
1409 /* Options given in the filename have lower priority than options
1410 * specified directly */
1411 qdict_join(options
, json_options
, false);
1412 QDECREF(json_options
);
1416 bs
->options
= options
;
1417 options
= qdict_clone_shallow(options
);
1419 if (flags
& BDRV_O_PROTOCOL
) {
1421 ret
= bdrv_file_open(bs
, filename
, &options
, flags
& ~BDRV_O_PROTOCOL
,
1426 } else if (bs
->drv
) {
1427 goto close_and_fail
;
1433 /* Open image file without format layer */
1434 if (flags
& BDRV_O_RDWR
) {
1435 flags
|= BDRV_O_ALLOW_RDWR
;
1437 if (flags
& BDRV_O_SNAPSHOT
) {
1438 snapshot_flags
= bdrv_temp_snapshot_flags(flags
);
1439 flags
= bdrv_backing_flags(flags
);
1442 assert(file
== NULL
);
1443 ret
= bdrv_open_image(&file
, filename
, options
, "file",
1444 bdrv_inherited_flags(flags
),
1450 /* Find the right image format driver */
1451 drvname
= qdict_get_try_str(options
, "driver");
1453 drv
= bdrv_find_format(drvname
);
1454 qdict_del(options
, "driver");
1456 error_setg(errp
, "Invalid driver: '%s'", drvname
);
1464 ret
= find_image_format(file
, filename
, &drv
, &local_err
);
1466 error_setg(errp
, "Must specify either driver or file");
1476 /* Open the image */
1477 ret
= bdrv_open_common(bs
, file
, options
, flags
, drv
, &local_err
);
1482 if (file
&& (bs
->file
!= file
)) {
1487 /* If there is a backing file, use it */
1488 if ((flags
& BDRV_O_NO_BACKING
) == 0) {
1489 QDict
*backing_options
;
1491 qdict_extract_subqdict(options
, &backing_options
, "backing.");
1492 ret
= bdrv_open_backing_file(bs
, backing_options
, &local_err
);
1494 goto close_and_fail
;
1498 /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1499 * temporary snapshot afterwards. */
1500 if (snapshot_flags
) {
1501 bdrv_append_temp_snapshot(bs
, snapshot_flags
, &local_err
);
1503 error_propagate(errp
, local_err
);
1504 goto close_and_fail
;
1510 /* Check if any unknown options were used */
1511 if (options
&& (qdict_size(options
) != 0)) {
1512 const QDictEntry
*entry
= qdict_first(options
);
1513 if (flags
& BDRV_O_PROTOCOL
) {
1514 error_setg(errp
, "Block protocol '%s' doesn't support the option "
1515 "'%s'", drv
->format_name
, entry
->key
);
1517 error_setg(errp
, "Block format '%s' used by device '%s' doesn't "
1518 "support the option '%s'", drv
->format_name
,
1519 bs
->device_name
, entry
->key
);
1523 goto close_and_fail
;
1526 if (!bdrv_key_required(bs
)) {
1527 bdrv_dev_change_media_cb(bs
, true);
1528 } else if (!runstate_check(RUN_STATE_PRELAUNCH
)
1529 && !runstate_check(RUN_STATE_INMIGRATE
)
1530 && !runstate_check(RUN_STATE_PAUSED
)) { /* HACK */
1532 "Guest must be stopped for opening of encrypted image");
1534 goto close_and_fail
;
1545 QDECREF(bs
->options
);
1549 /* If *pbs is NULL, a new BDS has been created in this function and
1550 needs to be freed now. Otherwise, it does not need to be closed,
1551 since it has not really been opened yet. */
1555 error_propagate(errp
, local_err
);
1560 /* See fail path, but now the BDS has to be always closed */
1568 error_propagate(errp
, local_err
);
1573 typedef struct BlockReopenQueueEntry
{
1575 BDRVReopenState state
;
1576 QSIMPLEQ_ENTRY(BlockReopenQueueEntry
) entry
;
1577 } BlockReopenQueueEntry
;
1580 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1581 * reopen of multiple devices.
1583 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1584 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1585 * be created and initialized. This newly created BlockReopenQueue should be
1586 * passed back in for subsequent calls that are intended to be of the same
1589 * bs is the BlockDriverState to add to the reopen queue.
1591 * flags contains the open flags for the associated bs
1593 * returns a pointer to bs_queue, which is either the newly allocated
1594 * bs_queue, or the existing bs_queue being used.
1597 BlockReopenQueue
*bdrv_reopen_queue(BlockReopenQueue
*bs_queue
,
1598 BlockDriverState
*bs
, int flags
)
1602 BlockReopenQueueEntry
*bs_entry
;
1603 if (bs_queue
== NULL
) {
1604 bs_queue
= g_new0(BlockReopenQueue
, 1);
1605 QSIMPLEQ_INIT(bs_queue
);
1608 /* bdrv_open() masks this flag out */
1609 flags
&= ~BDRV_O_PROTOCOL
;
1612 bdrv_reopen_queue(bs_queue
, bs
->file
, bdrv_inherited_flags(flags
));
1615 bs_entry
= g_new0(BlockReopenQueueEntry
, 1);
1616 QSIMPLEQ_INSERT_TAIL(bs_queue
, bs_entry
, entry
);
1618 bs_entry
->state
.bs
= bs
;
1619 bs_entry
->state
.flags
= flags
;
1625 * Reopen multiple BlockDriverStates atomically & transactionally.
1627 * The queue passed in (bs_queue) must have been built up previous
1628 * via bdrv_reopen_queue().
1630 * Reopens all BDS specified in the queue, with the appropriate
1631 * flags. All devices are prepared for reopen, and failure of any
1632 * device will cause all device changes to be abandonded, and intermediate
1635 * If all devices prepare successfully, then the changes are committed
1639 int bdrv_reopen_multiple(BlockReopenQueue
*bs_queue
, Error
**errp
)
1642 BlockReopenQueueEntry
*bs_entry
, *next
;
1643 Error
*local_err
= NULL
;
1645 assert(bs_queue
!= NULL
);
1649 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1650 if (bdrv_reopen_prepare(&bs_entry
->state
, bs_queue
, &local_err
)) {
1651 error_propagate(errp
, local_err
);
1654 bs_entry
->prepared
= true;
1657 /* If we reach this point, we have success and just need to apply the
1660 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1661 bdrv_reopen_commit(&bs_entry
->state
);
1667 QSIMPLEQ_FOREACH_SAFE(bs_entry
, bs_queue
, entry
, next
) {
1668 if (ret
&& bs_entry
->prepared
) {
1669 bdrv_reopen_abort(&bs_entry
->state
);
1678 /* Reopen a single BlockDriverState with the specified flags. */
1679 int bdrv_reopen(BlockDriverState
*bs
, int bdrv_flags
, Error
**errp
)
1682 Error
*local_err
= NULL
;
1683 BlockReopenQueue
*queue
= bdrv_reopen_queue(NULL
, bs
, bdrv_flags
);
1685 ret
= bdrv_reopen_multiple(queue
, &local_err
);
1686 if (local_err
!= NULL
) {
1687 error_propagate(errp
, local_err
);
1694 * Prepares a BlockDriverState for reopen. All changes are staged in the
1695 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1696 * the block driver layer .bdrv_reopen_prepare()
1698 * bs is the BlockDriverState to reopen
1699 * flags are the new open flags
1700 * queue is the reopen queue
1702 * Returns 0 on success, non-zero on error. On error errp will be set
1705 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1706 * It is the responsibility of the caller to then call the abort() or
1707 * commit() for any other BDS that have been left in a prepare() state
1710 int bdrv_reopen_prepare(BDRVReopenState
*reopen_state
, BlockReopenQueue
*queue
,
1714 Error
*local_err
= NULL
;
1717 assert(reopen_state
!= NULL
);
1718 assert(reopen_state
->bs
->drv
!= NULL
);
1719 drv
= reopen_state
->bs
->drv
;
1721 /* if we are to stay read-only, do not allow permission change
1723 if (!(reopen_state
->bs
->open_flags
& BDRV_O_ALLOW_RDWR
) &&
1724 reopen_state
->flags
& BDRV_O_RDWR
) {
1725 error_set(errp
, QERR_DEVICE_IS_READ_ONLY
,
1726 reopen_state
->bs
->device_name
);
1731 ret
= bdrv_flush(reopen_state
->bs
);
1733 error_set(errp
, ERROR_CLASS_GENERIC_ERROR
, "Error (%s) flushing drive",
1738 if (drv
->bdrv_reopen_prepare
) {
1739 ret
= drv
->bdrv_reopen_prepare(reopen_state
, queue
, &local_err
);
1741 if (local_err
!= NULL
) {
1742 error_propagate(errp
, local_err
);
1744 error_setg(errp
, "failed while preparing to reopen image '%s'",
1745 reopen_state
->bs
->filename
);
1750 /* It is currently mandatory to have a bdrv_reopen_prepare()
1751 * handler for each supported drv. */
1752 error_set(errp
, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED
,
1753 drv
->format_name
, reopen_state
->bs
->device_name
,
1754 "reopening of file");
1766 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1767 * makes them final by swapping the staging BlockDriverState contents into
1768 * the active BlockDriverState contents.
1770 void bdrv_reopen_commit(BDRVReopenState
*reopen_state
)
1774 assert(reopen_state
!= NULL
);
1775 drv
= reopen_state
->bs
->drv
;
1776 assert(drv
!= NULL
);
1778 /* If there are any driver level actions to take */
1779 if (drv
->bdrv_reopen_commit
) {
1780 drv
->bdrv_reopen_commit(reopen_state
);
1783 /* set BDS specific flags now */
1784 reopen_state
->bs
->open_flags
= reopen_state
->flags
;
1785 reopen_state
->bs
->enable_write_cache
= !!(reopen_state
->flags
&
1787 reopen_state
->bs
->read_only
= !(reopen_state
->flags
& BDRV_O_RDWR
);
1789 bdrv_refresh_limits(reopen_state
->bs
);
1793 * Abort the reopen, and delete and free the staged changes in
1796 void bdrv_reopen_abort(BDRVReopenState
*reopen_state
)
1800 assert(reopen_state
!= NULL
);
1801 drv
= reopen_state
->bs
->drv
;
1802 assert(drv
!= NULL
);
1804 if (drv
->bdrv_reopen_abort
) {
1805 drv
->bdrv_reopen_abort(reopen_state
);
1810 void bdrv_close(BlockDriverState
*bs
)
1813 block_job_cancel_sync(bs
->job
);
1815 bdrv_drain_all(); /* complete I/O */
1817 bdrv_drain_all(); /* in case flush left pending I/O */
1818 notifier_list_notify(&bs
->close_notifiers
, bs
);
1821 if (bs
->backing_hd
) {
1822 BlockDriverState
*backing_hd
= bs
->backing_hd
;
1823 bdrv_set_backing_hd(bs
, NULL
);
1824 bdrv_unref(backing_hd
);
1826 bs
->drv
->bdrv_close(bs
);
1830 bs
->copy_on_read
= 0;
1831 bs
->backing_file
[0] = '\0';
1832 bs
->backing_format
[0] = '\0';
1833 bs
->total_sectors
= 0;
1838 bs
->zero_beyond_eof
= false;
1839 QDECREF(bs
->options
);
1842 if (bs
->file
!= NULL
) {
1843 bdrv_unref(bs
->file
);
1848 bdrv_dev_change_media_cb(bs
, false);
1850 /*throttling disk I/O limits*/
1851 if (bs
->io_limits_enabled
) {
1852 bdrv_io_limits_disable(bs
);
1856 void bdrv_close_all(void)
1858 BlockDriverState
*bs
;
1860 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
1861 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
1863 aio_context_acquire(aio_context
);
1865 aio_context_release(aio_context
);
1869 /* Check if any requests are in-flight (including throttled requests) */
1870 static bool bdrv_requests_pending(BlockDriverState
*bs
)
1872 if (!QLIST_EMPTY(&bs
->tracked_requests
)) {
1875 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[0])) {
1878 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[1])) {
1881 if (bs
->file
&& bdrv_requests_pending(bs
->file
)) {
1884 if (bs
->backing_hd
&& bdrv_requests_pending(bs
->backing_hd
)) {
1891 * Wait for pending requests to complete across all BlockDriverStates
1893 * This function does not flush data to disk, use bdrv_flush_all() for that
1894 * after calling this function.
1896 * Note that completion of an asynchronous I/O operation can trigger any
1897 * number of other I/O operations on other devices---for example a coroutine
1898 * can be arbitrarily complex and a constant flow of I/O can come until the
1899 * coroutine is complete. Because of this, it is not possible to have a
1900 * function to drain a single device's I/O queue.
1902 void bdrv_drain_all(void)
1904 /* Always run first iteration so any pending completion BHs run */
1906 BlockDriverState
*bs
;
1911 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
1912 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
1915 aio_context_acquire(aio_context
);
1916 bdrv_start_throttled_reqs(bs
);
1917 bs_busy
= bdrv_requests_pending(bs
);
1918 bs_busy
|= aio_poll(aio_context
, bs_busy
);
1919 aio_context_release(aio_context
);
1926 /* make a BlockDriverState anonymous by removing from bdrv_state and
1927 * graph_bdrv_state list.
1928 Also, NULL terminate the device_name to prevent double remove */
1929 void bdrv_make_anon(BlockDriverState
*bs
)
1931 if (bs
->device_name
[0] != '\0') {
1932 QTAILQ_REMOVE(&bdrv_states
, bs
, device_list
);
1934 bs
->device_name
[0] = '\0';
1935 if (bs
->node_name
[0] != '\0') {
1936 QTAILQ_REMOVE(&graph_bdrv_states
, bs
, node_list
);
1938 bs
->node_name
[0] = '\0';
1941 static void bdrv_rebind(BlockDriverState
*bs
)
1943 if (bs
->drv
&& bs
->drv
->bdrv_rebind
) {
1944 bs
->drv
->bdrv_rebind(bs
);
1948 static void bdrv_move_feature_fields(BlockDriverState
*bs_dest
,
1949 BlockDriverState
*bs_src
)
1951 /* move some fields that need to stay attached to the device */
1954 bs_dest
->dev_ops
= bs_src
->dev_ops
;
1955 bs_dest
->dev_opaque
= bs_src
->dev_opaque
;
1956 bs_dest
->dev
= bs_src
->dev
;
1957 bs_dest
->guest_block_size
= bs_src
->guest_block_size
;
1958 bs_dest
->copy_on_read
= bs_src
->copy_on_read
;
1960 bs_dest
->enable_write_cache
= bs_src
->enable_write_cache
;
1962 /* i/o throttled req */
1963 memcpy(&bs_dest
->throttle_state
,
1964 &bs_src
->throttle_state
,
1965 sizeof(ThrottleState
));
1966 bs_dest
->throttled_reqs
[0] = bs_src
->throttled_reqs
[0];
1967 bs_dest
->throttled_reqs
[1] = bs_src
->throttled_reqs
[1];
1968 bs_dest
->io_limits_enabled
= bs_src
->io_limits_enabled
;
1971 bs_dest
->on_read_error
= bs_src
->on_read_error
;
1972 bs_dest
->on_write_error
= bs_src
->on_write_error
;
1975 bs_dest
->iostatus_enabled
= bs_src
->iostatus_enabled
;
1976 bs_dest
->iostatus
= bs_src
->iostatus
;
1979 bs_dest
->dirty_bitmaps
= bs_src
->dirty_bitmaps
;
1981 /* reference count */
1982 bs_dest
->refcnt
= bs_src
->refcnt
;
1985 bs_dest
->job
= bs_src
->job
;
1987 /* keep the same entry in bdrv_states */
1988 pstrcpy(bs_dest
->device_name
, sizeof(bs_dest
->device_name
),
1989 bs_src
->device_name
);
1990 bs_dest
->device_list
= bs_src
->device_list
;
1991 memcpy(bs_dest
->op_blockers
, bs_src
->op_blockers
,
1992 sizeof(bs_dest
->op_blockers
));
1996 * Swap bs contents for two image chains while they are live,
1997 * while keeping required fields on the BlockDriverState that is
1998 * actually attached to a device.
2000 * This will modify the BlockDriverState fields, and swap contents
2001 * between bs_new and bs_old. Both bs_new and bs_old are modified.
2003 * bs_new is required to be anonymous.
2005 * This function does not create any image files.
2007 void bdrv_swap(BlockDriverState
*bs_new
, BlockDriverState
*bs_old
)
2009 BlockDriverState tmp
;
2011 /* The code needs to swap the node_name but simply swapping node_list won't
2012 * work so first remove the nodes from the graph list, do the swap then
2013 * insert them back if needed.
2015 if (bs_new
->node_name
[0] != '\0') {
2016 QTAILQ_REMOVE(&graph_bdrv_states
, bs_new
, node_list
);
2018 if (bs_old
->node_name
[0] != '\0') {
2019 QTAILQ_REMOVE(&graph_bdrv_states
, bs_old
, node_list
);
2022 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
2023 assert(bs_new
->device_name
[0] == '\0');
2024 assert(QLIST_EMPTY(&bs_new
->dirty_bitmaps
));
2025 assert(bs_new
->job
== NULL
);
2026 assert(bs_new
->dev
== NULL
);
2027 assert(bs_new
->io_limits_enabled
== false);
2028 assert(!throttle_have_timer(&bs_new
->throttle_state
));
2034 /* there are some fields that should not be swapped, move them back */
2035 bdrv_move_feature_fields(&tmp
, bs_old
);
2036 bdrv_move_feature_fields(bs_old
, bs_new
);
2037 bdrv_move_feature_fields(bs_new
, &tmp
);
2039 /* bs_new shouldn't be in bdrv_states even after the swap! */
2040 assert(bs_new
->device_name
[0] == '\0');
2042 /* Check a few fields that should remain attached to the device */
2043 assert(bs_new
->dev
== NULL
);
2044 assert(bs_new
->job
== NULL
);
2045 assert(bs_new
->io_limits_enabled
== false);
2046 assert(!throttle_have_timer(&bs_new
->throttle_state
));
2048 /* insert the nodes back into the graph node list if needed */
2049 if (bs_new
->node_name
[0] != '\0') {
2050 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs_new
, node_list
);
2052 if (bs_old
->node_name
[0] != '\0') {
2053 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs_old
, node_list
);
2056 bdrv_rebind(bs_new
);
2057 bdrv_rebind(bs_old
);
2061 * Add new bs contents at the top of an image chain while the chain is
2062 * live, while keeping required fields on the top layer.
2064 * This will modify the BlockDriverState fields, and swap contents
2065 * between bs_new and bs_top. Both bs_new and bs_top are modified.
2067 * bs_new is required to be anonymous.
2069 * This function does not create any image files.
2071 void bdrv_append(BlockDriverState
*bs_new
, BlockDriverState
*bs_top
)
2073 bdrv_swap(bs_new
, bs_top
);
2075 /* The contents of 'tmp' will become bs_top, as we are
2076 * swapping bs_new and bs_top contents. */
2077 bdrv_set_backing_hd(bs_top
, bs_new
);
2080 static void bdrv_delete(BlockDriverState
*bs
)
2084 assert(bdrv_op_blocker_is_empty(bs
));
2085 assert(!bs
->refcnt
);
2086 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
2090 /* remove from list, if necessary */
2096 int bdrv_attach_dev(BlockDriverState
*bs
, void *dev
)
2097 /* TODO change to DeviceState *dev when all users are qdevified */
2103 bdrv_iostatus_reset(bs
);
2107 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2108 void bdrv_attach_dev_nofail(BlockDriverState
*bs
, void *dev
)
2110 if (bdrv_attach_dev(bs
, dev
) < 0) {
2115 void bdrv_detach_dev(BlockDriverState
*bs
, void *dev
)
2116 /* TODO change to DeviceState *dev when all users are qdevified */
2118 assert(bs
->dev
== dev
);
2121 bs
->dev_opaque
= NULL
;
2122 bs
->guest_block_size
= 512;
2125 /* TODO change to return DeviceState * when all users are qdevified */
2126 void *bdrv_get_attached_dev(BlockDriverState
*bs
)
2131 void bdrv_set_dev_ops(BlockDriverState
*bs
, const BlockDevOps
*ops
,
2135 bs
->dev_opaque
= opaque
;
2138 void bdrv_emit_qmp_error_event(const BlockDriverState
*bdrv
,
2139 enum MonitorEvent ev
,
2140 BlockErrorAction action
, bool is_read
)
2143 const char *action_str
;
2146 case BDRV_ACTION_REPORT
:
2147 action_str
= "report";
2149 case BDRV_ACTION_IGNORE
:
2150 action_str
= "ignore";
2152 case BDRV_ACTION_STOP
:
2153 action_str
= "stop";
2159 data
= qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
2162 is_read
? "read" : "write");
2163 monitor_protocol_event(ev
, data
);
2165 qobject_decref(data
);
2168 static void bdrv_emit_qmp_eject_event(BlockDriverState
*bs
, bool ejected
)
2172 data
= qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
2173 bdrv_get_device_name(bs
), ejected
);
2174 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED
, data
);
2176 qobject_decref(data
);
2179 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
)
2181 if (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
) {
2182 bool tray_was_closed
= !bdrv_dev_is_tray_open(bs
);
2183 bs
->dev_ops
->change_media_cb(bs
->dev_opaque
, load
);
2184 if (tray_was_closed
) {
2186 bdrv_emit_qmp_eject_event(bs
, true);
2190 bdrv_emit_qmp_eject_event(bs
, false);
2195 bool bdrv_dev_has_removable_media(BlockDriverState
*bs
)
2197 return !bs
->dev
|| (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
);
2200 void bdrv_dev_eject_request(BlockDriverState
*bs
, bool force
)
2202 if (bs
->dev_ops
&& bs
->dev_ops
->eject_request_cb
) {
2203 bs
->dev_ops
->eject_request_cb(bs
->dev_opaque
, force
);
2207 bool bdrv_dev_is_tray_open(BlockDriverState
*bs
)
2209 if (bs
->dev_ops
&& bs
->dev_ops
->is_tray_open
) {
2210 return bs
->dev_ops
->is_tray_open(bs
->dev_opaque
);
2215 static void bdrv_dev_resize_cb(BlockDriverState
*bs
)
2217 if (bs
->dev_ops
&& bs
->dev_ops
->resize_cb
) {
2218 bs
->dev_ops
->resize_cb(bs
->dev_opaque
);
2222 bool bdrv_dev_is_medium_locked(BlockDriverState
*bs
)
2224 if (bs
->dev_ops
&& bs
->dev_ops
->is_medium_locked
) {
2225 return bs
->dev_ops
->is_medium_locked(bs
->dev_opaque
);
2231 * Run consistency checks on an image
2233 * Returns 0 if the check could be completed (it doesn't mean that the image is
2234 * free of errors) or -errno when an internal error occurred. The results of the
2235 * check are stored in res.
2237 int bdrv_check(BlockDriverState
*bs
, BdrvCheckResult
*res
, BdrvCheckMode fix
)
2239 if (bs
->drv
->bdrv_check
== NULL
) {
2243 memset(res
, 0, sizeof(*res
));
2244 return bs
->drv
->bdrv_check(bs
, res
, fix
);
2247 #define COMMIT_BUF_SECTORS 2048
2249 /* commit COW file into the raw image */
2250 int bdrv_commit(BlockDriverState
*bs
)
2252 BlockDriver
*drv
= bs
->drv
;
2253 int64_t sector
, total_sectors
, length
, backing_length
;
2254 int n
, ro
, open_flags
;
2256 uint8_t *buf
= NULL
;
2257 char filename
[PATH_MAX
];
2262 if (!bs
->backing_hd
) {
2266 if (bdrv_op_is_blocked(bs
, BLOCK_OP_TYPE_COMMIT
, NULL
) ||
2267 bdrv_op_is_blocked(bs
->backing_hd
, BLOCK_OP_TYPE_COMMIT
, NULL
)) {
2271 ro
= bs
->backing_hd
->read_only
;
2272 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2273 pstrcpy(filename
, sizeof(filename
), bs
->backing_hd
->filename
);
2274 open_flags
= bs
->backing_hd
->open_flags
;
2277 if (bdrv_reopen(bs
->backing_hd
, open_flags
| BDRV_O_RDWR
, NULL
)) {
2282 length
= bdrv_getlength(bs
);
2288 backing_length
= bdrv_getlength(bs
->backing_hd
);
2289 if (backing_length
< 0) {
2290 ret
= backing_length
;
2294 /* If our top snapshot is larger than the backing file image,
2295 * grow the backing file image if possible. If not possible,
2296 * we must return an error */
2297 if (length
> backing_length
) {
2298 ret
= bdrv_truncate(bs
->backing_hd
, length
);
2304 total_sectors
= length
>> BDRV_SECTOR_BITS
;
2305 buf
= g_malloc(COMMIT_BUF_SECTORS
* BDRV_SECTOR_SIZE
);
2307 for (sector
= 0; sector
< total_sectors
; sector
+= n
) {
2308 ret
= bdrv_is_allocated(bs
, sector
, COMMIT_BUF_SECTORS
, &n
);
2313 ret
= bdrv_read(bs
, sector
, buf
, n
);
2318 ret
= bdrv_write(bs
->backing_hd
, sector
, buf
, n
);
2325 if (drv
->bdrv_make_empty
) {
2326 ret
= drv
->bdrv_make_empty(bs
);
2334 * Make sure all data we wrote to the backing device is actually
2337 if (bs
->backing_hd
) {
2338 bdrv_flush(bs
->backing_hd
);
2346 /* ignoring error return here */
2347 bdrv_reopen(bs
->backing_hd
, open_flags
& ~BDRV_O_RDWR
, NULL
);
2353 int bdrv_commit_all(void)
2355 BlockDriverState
*bs
;
2357 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
2358 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
2360 aio_context_acquire(aio_context
);
2361 if (bs
->drv
&& bs
->backing_hd
) {
2362 int ret
= bdrv_commit(bs
);
2364 aio_context_release(aio_context
);
2368 aio_context_release(aio_context
);
2374 * Remove an active request from the tracked requests list
2376 * This function should be called when a tracked request is completing.
2378 static void tracked_request_end(BdrvTrackedRequest
*req
)
2380 if (req
->serialising
) {
2381 req
->bs
->serialising_in_flight
--;
2384 QLIST_REMOVE(req
, list
);
2385 qemu_co_queue_restart_all(&req
->wait_queue
);
2389 * Add an active request to the tracked requests list
2391 static void tracked_request_begin(BdrvTrackedRequest
*req
,
2392 BlockDriverState
*bs
,
2394 unsigned int bytes
, bool is_write
)
2396 *req
= (BdrvTrackedRequest
){
2400 .is_write
= is_write
,
2401 .co
= qemu_coroutine_self(),
2402 .serialising
= false,
2403 .overlap_offset
= offset
,
2404 .overlap_bytes
= bytes
,
2407 qemu_co_queue_init(&req
->wait_queue
);
2409 QLIST_INSERT_HEAD(&bs
->tracked_requests
, req
, list
);
2412 static void mark_request_serialising(BdrvTrackedRequest
*req
, uint64_t align
)
2414 int64_t overlap_offset
= req
->offset
& ~(align
- 1);
2415 unsigned int overlap_bytes
= ROUND_UP(req
->offset
+ req
->bytes
, align
)
2418 if (!req
->serialising
) {
2419 req
->bs
->serialising_in_flight
++;
2420 req
->serialising
= true;
2423 req
->overlap_offset
= MIN(req
->overlap_offset
, overlap_offset
);
2424 req
->overlap_bytes
= MAX(req
->overlap_bytes
, overlap_bytes
);
2428 * Round a region to cluster boundaries
2430 void bdrv_round_to_clusters(BlockDriverState
*bs
,
2431 int64_t sector_num
, int nb_sectors
,
2432 int64_t *cluster_sector_num
,
2433 int *cluster_nb_sectors
)
2435 BlockDriverInfo bdi
;
2437 if (bdrv_get_info(bs
, &bdi
) < 0 || bdi
.cluster_size
== 0) {
2438 *cluster_sector_num
= sector_num
;
2439 *cluster_nb_sectors
= nb_sectors
;
2441 int64_t c
= bdi
.cluster_size
/ BDRV_SECTOR_SIZE
;
2442 *cluster_sector_num
= QEMU_ALIGN_DOWN(sector_num
, c
);
2443 *cluster_nb_sectors
= QEMU_ALIGN_UP(sector_num
- *cluster_sector_num
+
2448 static int bdrv_get_cluster_size(BlockDriverState
*bs
)
2450 BlockDriverInfo bdi
;
2453 ret
= bdrv_get_info(bs
, &bdi
);
2454 if (ret
< 0 || bdi
.cluster_size
== 0) {
2455 return bs
->request_alignment
;
2457 return bdi
.cluster_size
;
2461 static bool tracked_request_overlaps(BdrvTrackedRequest
*req
,
2462 int64_t offset
, unsigned int bytes
)
2465 if (offset
>= req
->overlap_offset
+ req
->overlap_bytes
) {
2469 if (req
->overlap_offset
>= offset
+ bytes
) {
2475 static bool coroutine_fn
wait_serialising_requests(BdrvTrackedRequest
*self
)
2477 BlockDriverState
*bs
= self
->bs
;
2478 BdrvTrackedRequest
*req
;
2480 bool waited
= false;
2482 if (!bs
->serialising_in_flight
) {
2488 QLIST_FOREACH(req
, &bs
->tracked_requests
, list
) {
2489 if (req
== self
|| (!req
->serialising
&& !self
->serialising
)) {
2492 if (tracked_request_overlaps(req
, self
->overlap_offset
,
2493 self
->overlap_bytes
))
2495 /* Hitting this means there was a reentrant request, for
2496 * example, a block driver issuing nested requests. This must
2497 * never happen since it means deadlock.
2499 assert(qemu_coroutine_self() != req
->co
);
2501 /* If the request is already (indirectly) waiting for us, or
2502 * will wait for us as soon as it wakes up, then just go on
2503 * (instead of producing a deadlock in the former case). */
2504 if (!req
->waiting_for
) {
2505 self
->waiting_for
= req
;
2506 qemu_co_queue_wait(&req
->wait_queue
);
2507 self
->waiting_for
= NULL
;
2522 * -EINVAL - backing format specified, but no file
2523 * -ENOSPC - can't update the backing file because no space is left in the
2525 * -ENOTSUP - format driver doesn't support changing the backing file
2527 int bdrv_change_backing_file(BlockDriverState
*bs
,
2528 const char *backing_file
, const char *backing_fmt
)
2530 BlockDriver
*drv
= bs
->drv
;
2533 /* Backing file format doesn't make sense without a backing file */
2534 if (backing_fmt
&& !backing_file
) {
2538 if (drv
->bdrv_change_backing_file
!= NULL
) {
2539 ret
= drv
->bdrv_change_backing_file(bs
, backing_file
, backing_fmt
);
2545 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_file
?: "");
2546 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
), backing_fmt
?: "");
2552 * Finds the image layer in the chain that has 'bs' as its backing file.
2554 * active is the current topmost image.
2556 * Returns NULL if bs is not found in active's image chain,
2557 * or if active == bs.
2559 BlockDriverState
*bdrv_find_overlay(BlockDriverState
*active
,
2560 BlockDriverState
*bs
)
2562 BlockDriverState
*overlay
= NULL
;
2563 BlockDriverState
*intermediate
;
2565 assert(active
!= NULL
);
2568 /* if bs is the same as active, then by definition it has no overlay
2574 intermediate
= active
;
2575 while (intermediate
->backing_hd
) {
2576 if (intermediate
->backing_hd
== bs
) {
2577 overlay
= intermediate
;
2580 intermediate
= intermediate
->backing_hd
;
2586 typedef struct BlkIntermediateStates
{
2587 BlockDriverState
*bs
;
2588 QSIMPLEQ_ENTRY(BlkIntermediateStates
) entry
;
2589 } BlkIntermediateStates
;
2593 * Drops images above 'base' up to and including 'top', and sets the image
2594 * above 'top' to have base as its backing file.
2596 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2597 * information in 'bs' can be properly updated.
2599 * E.g., this will convert the following chain:
2600 * bottom <- base <- intermediate <- top <- active
2604 * bottom <- base <- active
2606 * It is allowed for bottom==base, in which case it converts:
2608 * base <- intermediate <- top <- active
2615 * if active == top, that is considered an error
2618 int bdrv_drop_intermediate(BlockDriverState
*active
, BlockDriverState
*top
,
2619 BlockDriverState
*base
)
2621 BlockDriverState
*intermediate
;
2622 BlockDriverState
*base_bs
= NULL
;
2623 BlockDriverState
*new_top_bs
= NULL
;
2624 BlkIntermediateStates
*intermediate_state
, *next
;
2627 QSIMPLEQ_HEAD(states_to_delete
, BlkIntermediateStates
) states_to_delete
;
2628 QSIMPLEQ_INIT(&states_to_delete
);
2630 if (!top
->drv
|| !base
->drv
) {
2634 new_top_bs
= bdrv_find_overlay(active
, top
);
2636 if (new_top_bs
== NULL
) {
2637 /* we could not find the image above 'top', this is an error */
2641 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2642 * to do, no intermediate images */
2643 if (new_top_bs
->backing_hd
== base
) {
2650 /* now we will go down through the list, and add each BDS we find
2651 * into our deletion queue, until we hit the 'base'
2653 while (intermediate
) {
2654 intermediate_state
= g_malloc0(sizeof(BlkIntermediateStates
));
2655 intermediate_state
->bs
= intermediate
;
2656 QSIMPLEQ_INSERT_TAIL(&states_to_delete
, intermediate_state
, entry
);
2658 if (intermediate
->backing_hd
== base
) {
2659 base_bs
= intermediate
->backing_hd
;
2662 intermediate
= intermediate
->backing_hd
;
2664 if (base_bs
== NULL
) {
2665 /* something went wrong, we did not end at the base. safely
2666 * unravel everything, and exit with error */
2670 /* success - we can delete the intermediate states, and link top->base */
2671 ret
= bdrv_change_backing_file(new_top_bs
, base_bs
->filename
,
2672 base_bs
->drv
? base_bs
->drv
->format_name
: "");
2676 bdrv_set_backing_hd(new_top_bs
, base_bs
);
2678 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2679 /* so that bdrv_close() does not recursively close the chain */
2680 bdrv_set_backing_hd(intermediate_state
->bs
, NULL
);
2681 bdrv_unref(intermediate_state
->bs
);
2686 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2687 g_free(intermediate_state
);
2693 static int bdrv_check_byte_request(BlockDriverState
*bs
, int64_t offset
,
2698 if (size
> INT_MAX
) {
2702 if (!bdrv_is_inserted(bs
))
2708 len
= bdrv_getlength(bs
);
2713 if ((offset
> len
) || (len
- offset
< size
))
2719 static int bdrv_check_request(BlockDriverState
*bs
, int64_t sector_num
,
2722 if (nb_sectors
< 0 || nb_sectors
> INT_MAX
/ BDRV_SECTOR_SIZE
) {
2726 return bdrv_check_byte_request(bs
, sector_num
* BDRV_SECTOR_SIZE
,
2727 nb_sectors
* BDRV_SECTOR_SIZE
);
2730 typedef struct RwCo
{
2731 BlockDriverState
*bs
;
2736 BdrvRequestFlags flags
;
2739 static void coroutine_fn
bdrv_rw_co_entry(void *opaque
)
2741 RwCo
*rwco
= opaque
;
2743 if (!rwco
->is_write
) {
2744 rwco
->ret
= bdrv_co_do_preadv(rwco
->bs
, rwco
->offset
,
2745 rwco
->qiov
->size
, rwco
->qiov
,
2748 rwco
->ret
= bdrv_co_do_pwritev(rwco
->bs
, rwco
->offset
,
2749 rwco
->qiov
->size
, rwco
->qiov
,
2755 * Process a vectored synchronous request using coroutines
2757 static int bdrv_prwv_co(BlockDriverState
*bs
, int64_t offset
,
2758 QEMUIOVector
*qiov
, bool is_write
,
2759 BdrvRequestFlags flags
)
2766 .is_write
= is_write
,
2772 * In sync call context, when the vcpu is blocked, this throttling timer
2773 * will not fire; so the I/O throttling function has to be disabled here
2774 * if it has been enabled.
2776 if (bs
->io_limits_enabled
) {
2777 fprintf(stderr
, "Disabling I/O throttling on '%s' due "
2778 "to synchronous I/O.\n", bdrv_get_device_name(bs
));
2779 bdrv_io_limits_disable(bs
);
2782 if (qemu_in_coroutine()) {
2783 /* Fast-path if already in coroutine context */
2784 bdrv_rw_co_entry(&rwco
);
2786 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
2788 co
= qemu_coroutine_create(bdrv_rw_co_entry
);
2789 qemu_coroutine_enter(co
, &rwco
);
2790 while (rwco
.ret
== NOT_DONE
) {
2791 aio_poll(aio_context
, true);
2798 * Process a synchronous request using coroutines
2800 static int bdrv_rw_co(BlockDriverState
*bs
, int64_t sector_num
, uint8_t *buf
,
2801 int nb_sectors
, bool is_write
, BdrvRequestFlags flags
)
2804 struct iovec iov
= {
2805 .iov_base
= (void *)buf
,
2806 .iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
,
2809 if (nb_sectors
< 0 || nb_sectors
> INT_MAX
/ BDRV_SECTOR_SIZE
) {
2813 qemu_iovec_init_external(&qiov
, &iov
, 1);
2814 return bdrv_prwv_co(bs
, sector_num
<< BDRV_SECTOR_BITS
,
2815 &qiov
, is_write
, flags
);
2818 /* return < 0 if error. See bdrv_write() for the return codes */
2819 int bdrv_read(BlockDriverState
*bs
, int64_t sector_num
,
2820 uint8_t *buf
, int nb_sectors
)
2822 return bdrv_rw_co(bs
, sector_num
, buf
, nb_sectors
, false, 0);
2825 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2826 int bdrv_read_unthrottled(BlockDriverState
*bs
, int64_t sector_num
,
2827 uint8_t *buf
, int nb_sectors
)
2832 enabled
= bs
->io_limits_enabled
;
2833 bs
->io_limits_enabled
= false;
2834 ret
= bdrv_read(bs
, sector_num
, buf
, nb_sectors
);
2835 bs
->io_limits_enabled
= enabled
;
2839 /* Return < 0 if error. Important errors are:
2840 -EIO generic I/O error (may happen for all errors)
2841 -ENOMEDIUM No media inserted.
2842 -EINVAL Invalid sector number or nb_sectors
2843 -EACCES Trying to write a read-only device
2845 int bdrv_write(BlockDriverState
*bs
, int64_t sector_num
,
2846 const uint8_t *buf
, int nb_sectors
)
2848 return bdrv_rw_co(bs
, sector_num
, (uint8_t *)buf
, nb_sectors
, true, 0);
2851 int bdrv_write_zeroes(BlockDriverState
*bs
, int64_t sector_num
,
2852 int nb_sectors
, BdrvRequestFlags flags
)
2854 return bdrv_rw_co(bs
, sector_num
, NULL
, nb_sectors
, true,
2855 BDRV_REQ_ZERO_WRITE
| flags
);
2859 * Completely zero out a block device with the help of bdrv_write_zeroes.
2860 * The operation is sped up by checking the block status and only writing
2861 * zeroes to the device if they currently do not return zeroes. Optional
2862 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2864 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2866 int bdrv_make_zero(BlockDriverState
*bs
, BdrvRequestFlags flags
)
2868 int64_t target_size
;
2869 int64_t ret
, nb_sectors
, sector_num
= 0;
2872 target_size
= bdrv_getlength(bs
);
2873 if (target_size
< 0) {
2876 target_size
/= BDRV_SECTOR_SIZE
;
2879 nb_sectors
= target_size
- sector_num
;
2880 if (nb_sectors
<= 0) {
2883 if (nb_sectors
> INT_MAX
) {
2884 nb_sectors
= INT_MAX
;
2886 ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, &n
);
2888 error_report("error getting block status at sector %" PRId64
": %s",
2889 sector_num
, strerror(-ret
));
2892 if (ret
& BDRV_BLOCK_ZERO
) {
2896 ret
= bdrv_write_zeroes(bs
, sector_num
, n
, flags
);
2898 error_report("error writing zeroes at sector %" PRId64
": %s",
2899 sector_num
, strerror(-ret
));
2906 int bdrv_pread(BlockDriverState
*bs
, int64_t offset
, void *buf
, int bytes
)
2909 struct iovec iov
= {
2910 .iov_base
= (void *)buf
,
2919 qemu_iovec_init_external(&qiov
, &iov
, 1);
2920 ret
= bdrv_prwv_co(bs
, offset
, &qiov
, false, 0);
2928 int bdrv_pwritev(BlockDriverState
*bs
, int64_t offset
, QEMUIOVector
*qiov
)
2932 ret
= bdrv_prwv_co(bs
, offset
, qiov
, true, 0);
2940 int bdrv_pwrite(BlockDriverState
*bs
, int64_t offset
,
2941 const void *buf
, int bytes
)
2944 struct iovec iov
= {
2945 .iov_base
= (void *) buf
,
2953 qemu_iovec_init_external(&qiov
, &iov
, 1);
2954 return bdrv_pwritev(bs
, offset
, &qiov
);
2958 * Writes to the file and ensures that no writes are reordered across this
2959 * request (acts as a barrier)
2961 * Returns 0 on success, -errno in error cases.
2963 int bdrv_pwrite_sync(BlockDriverState
*bs
, int64_t offset
,
2964 const void *buf
, int count
)
2968 ret
= bdrv_pwrite(bs
, offset
, buf
, count
);
2973 /* No flush needed for cache modes that already do it */
2974 if (bs
->enable_write_cache
) {
2981 static int coroutine_fn
bdrv_co_do_copy_on_readv(BlockDriverState
*bs
,
2982 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2984 /* Perform I/O through a temporary buffer so that users who scribble over
2985 * their read buffer while the operation is in progress do not end up
2986 * modifying the image file. This is critical for zero-copy guest I/O
2987 * where anything might happen inside guest memory.
2989 void *bounce_buffer
;
2991 BlockDriver
*drv
= bs
->drv
;
2993 QEMUIOVector bounce_qiov
;
2994 int64_t cluster_sector_num
;
2995 int cluster_nb_sectors
;
2999 /* Cover entire cluster so no additional backing file I/O is required when
3000 * allocating cluster in the image file.
3002 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
3003 &cluster_sector_num
, &cluster_nb_sectors
);
3005 trace_bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
,
3006 cluster_sector_num
, cluster_nb_sectors
);
3008 iov
.iov_len
= cluster_nb_sectors
* BDRV_SECTOR_SIZE
;
3009 iov
.iov_base
= bounce_buffer
= qemu_blockalign(bs
, iov
.iov_len
);
3010 qemu_iovec_init_external(&bounce_qiov
, &iov
, 1);
3012 ret
= drv
->bdrv_co_readv(bs
, cluster_sector_num
, cluster_nb_sectors
,
3018 if (drv
->bdrv_co_write_zeroes
&&
3019 buffer_is_zero(bounce_buffer
, iov
.iov_len
)) {
3020 ret
= bdrv_co_do_write_zeroes(bs
, cluster_sector_num
,
3021 cluster_nb_sectors
, 0);
3023 /* This does not change the data on the disk, it is not necessary
3024 * to flush even in cache=writethrough mode.
3026 ret
= drv
->bdrv_co_writev(bs
, cluster_sector_num
, cluster_nb_sectors
,
3031 /* It might be okay to ignore write errors for guest requests. If this
3032 * is a deliberate copy-on-read then we don't want to ignore the error.
3033 * Simply report it in all cases.
3038 skip_bytes
= (sector_num
- cluster_sector_num
) * BDRV_SECTOR_SIZE
;
3039 qemu_iovec_from_buf(qiov
, 0, bounce_buffer
+ skip_bytes
,
3040 nb_sectors
* BDRV_SECTOR_SIZE
);
3043 qemu_vfree(bounce_buffer
);
3048 * Forwards an already correctly aligned request to the BlockDriver. This
3049 * handles copy on read and zeroing after EOF; any other features must be
3050 * implemented by the caller.
3052 static int coroutine_fn
bdrv_aligned_preadv(BlockDriverState
*bs
,
3053 BdrvTrackedRequest
*req
, int64_t offset
, unsigned int bytes
,
3054 int64_t align
, QEMUIOVector
*qiov
, int flags
)
3056 BlockDriver
*drv
= bs
->drv
;
3059 int64_t sector_num
= offset
>> BDRV_SECTOR_BITS
;
3060 unsigned int nb_sectors
= bytes
>> BDRV_SECTOR_BITS
;
3062 assert((offset
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3063 assert((bytes
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3065 /* Handle Copy on Read and associated serialisation */
3066 if (flags
& BDRV_REQ_COPY_ON_READ
) {
3067 /* If we touch the same cluster it counts as an overlap. This
3068 * guarantees that allocating writes will be serialized and not race
3069 * with each other for the same cluster. For example, in copy-on-read
3070 * it ensures that the CoR read and write operations are atomic and
3071 * guest writes cannot interleave between them. */
3072 mark_request_serialising(req
, bdrv_get_cluster_size(bs
));
3075 wait_serialising_requests(req
);
3077 if (flags
& BDRV_REQ_COPY_ON_READ
) {
3080 ret
= bdrv_is_allocated(bs
, sector_num
, nb_sectors
, &pnum
);
3085 if (!ret
|| pnum
!= nb_sectors
) {
3086 ret
= bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
, qiov
);
3091 /* Forward the request to the BlockDriver */
3092 if (!(bs
->zero_beyond_eof
&& bs
->growable
)) {
3093 ret
= drv
->bdrv_co_readv(bs
, sector_num
, nb_sectors
, qiov
);
3095 /* Read zeros after EOF of growable BDSes */
3096 int64_t len
, total_sectors
, max_nb_sectors
;
3098 len
= bdrv_getlength(bs
);
3104 total_sectors
= DIV_ROUND_UP(len
, BDRV_SECTOR_SIZE
);
3105 max_nb_sectors
= ROUND_UP(MAX(0, total_sectors
- sector_num
),
3106 align
>> BDRV_SECTOR_BITS
);
3107 if (max_nb_sectors
> 0) {
3108 ret
= drv
->bdrv_co_readv(bs
, sector_num
,
3109 MIN(nb_sectors
, max_nb_sectors
), qiov
);
3114 /* Reading beyond end of file is supposed to produce zeroes */
3115 if (ret
== 0 && total_sectors
< sector_num
+ nb_sectors
) {
3116 uint64_t offset
= MAX(0, total_sectors
- sector_num
);
3117 uint64_t bytes
= (sector_num
+ nb_sectors
- offset
) *
3119 qemu_iovec_memset(qiov
, offset
* BDRV_SECTOR_SIZE
, 0, bytes
);
3128 * Handle a read request in coroutine context
3130 static int coroutine_fn
bdrv_co_do_preadv(BlockDriverState
*bs
,
3131 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
3132 BdrvRequestFlags flags
)
3134 BlockDriver
*drv
= bs
->drv
;
3135 BdrvTrackedRequest req
;
3137 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3138 uint64_t align
= MAX(BDRV_SECTOR_SIZE
, bs
->request_alignment
);
3139 uint8_t *head_buf
= NULL
;
3140 uint8_t *tail_buf
= NULL
;
3141 QEMUIOVector local_qiov
;
3142 bool use_local_qiov
= false;
3148 if (bdrv_check_byte_request(bs
, offset
, bytes
)) {
3152 if (bs
->copy_on_read
) {
3153 flags
|= BDRV_REQ_COPY_ON_READ
;
3156 /* throttling disk I/O */
3157 if (bs
->io_limits_enabled
) {
3158 bdrv_io_limits_intercept(bs
, bytes
, false);
3161 /* Align read if necessary by padding qiov */
3162 if (offset
& (align
- 1)) {
3163 head_buf
= qemu_blockalign(bs
, align
);
3164 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 2);
3165 qemu_iovec_add(&local_qiov
, head_buf
, offset
& (align
- 1));
3166 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3167 use_local_qiov
= true;
3169 bytes
+= offset
& (align
- 1);
3170 offset
= offset
& ~(align
- 1);
3173 if ((offset
+ bytes
) & (align
- 1)) {
3174 if (!use_local_qiov
) {
3175 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 1);
3176 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3177 use_local_qiov
= true;
3179 tail_buf
= qemu_blockalign(bs
, align
);
3180 qemu_iovec_add(&local_qiov
, tail_buf
,
3181 align
- ((offset
+ bytes
) & (align
- 1)));
3183 bytes
= ROUND_UP(bytes
, align
);
3186 tracked_request_begin(&req
, bs
, offset
, bytes
, false);
3187 ret
= bdrv_aligned_preadv(bs
, &req
, offset
, bytes
, align
,
3188 use_local_qiov
? &local_qiov
: qiov
,
3190 tracked_request_end(&req
);
3192 if (use_local_qiov
) {
3193 qemu_iovec_destroy(&local_qiov
);
3194 qemu_vfree(head_buf
);
3195 qemu_vfree(tail_buf
);
3201 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
3202 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
3203 BdrvRequestFlags flags
)
3205 if (nb_sectors
< 0 || nb_sectors
> (UINT_MAX
>> BDRV_SECTOR_BITS
)) {
3209 return bdrv_co_do_preadv(bs
, sector_num
<< BDRV_SECTOR_BITS
,
3210 nb_sectors
<< BDRV_SECTOR_BITS
, qiov
, flags
);
3213 int coroutine_fn
bdrv_co_readv(BlockDriverState
*bs
, int64_t sector_num
,
3214 int nb_sectors
, QEMUIOVector
*qiov
)
3216 trace_bdrv_co_readv(bs
, sector_num
, nb_sectors
);
3218 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
, 0);
3221 int coroutine_fn
bdrv_co_copy_on_readv(BlockDriverState
*bs
,
3222 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
3224 trace_bdrv_co_copy_on_readv(bs
, sector_num
, nb_sectors
);
3226 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
,
3227 BDRV_REQ_COPY_ON_READ
);
3230 /* if no limit is specified in the BlockLimits use a default
3231 * of 32768 512-byte sectors (16 MiB) per request.
3233 #define MAX_WRITE_ZEROES_DEFAULT 32768
3235 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
3236 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
)
3238 BlockDriver
*drv
= bs
->drv
;
3240 struct iovec iov
= {0};
3243 int max_write_zeroes
= bs
->bl
.max_write_zeroes
?
3244 bs
->bl
.max_write_zeroes
: MAX_WRITE_ZEROES_DEFAULT
;
3246 while (nb_sectors
> 0 && !ret
) {
3247 int num
= nb_sectors
;
3249 /* Align request. Block drivers can expect the "bulk" of the request
3252 if (bs
->bl
.write_zeroes_alignment
3253 && num
> bs
->bl
.write_zeroes_alignment
) {
3254 if (sector_num
% bs
->bl
.write_zeroes_alignment
!= 0) {
3255 /* Make a small request up to the first aligned sector. */
3256 num
= bs
->bl
.write_zeroes_alignment
;
3257 num
-= sector_num
% bs
->bl
.write_zeroes_alignment
;
3258 } else if ((sector_num
+ num
) % bs
->bl
.write_zeroes_alignment
!= 0) {
3259 /* Shorten the request to the last aligned sector. num cannot
3260 * underflow because num > bs->bl.write_zeroes_alignment.
3262 num
-= (sector_num
+ num
) % bs
->bl
.write_zeroes_alignment
;
3266 /* limit request size */
3267 if (num
> max_write_zeroes
) {
3268 num
= max_write_zeroes
;
3272 /* First try the efficient write zeroes operation */
3273 if (drv
->bdrv_co_write_zeroes
) {
3274 ret
= drv
->bdrv_co_write_zeroes(bs
, sector_num
, num
, flags
);
3277 if (ret
== -ENOTSUP
) {
3278 /* Fall back to bounce buffer if write zeroes is unsupported */
3279 iov
.iov_len
= num
* BDRV_SECTOR_SIZE
;
3280 if (iov
.iov_base
== NULL
) {
3281 iov
.iov_base
= qemu_blockalign(bs
, num
* BDRV_SECTOR_SIZE
);
3282 memset(iov
.iov_base
, 0, num
* BDRV_SECTOR_SIZE
);
3284 qemu_iovec_init_external(&qiov
, &iov
, 1);
3286 ret
= drv
->bdrv_co_writev(bs
, sector_num
, num
, &qiov
);
3288 /* Keep bounce buffer around if it is big enough for all
3289 * all future requests.
3291 if (num
< max_write_zeroes
) {
3292 qemu_vfree(iov
.iov_base
);
3293 iov
.iov_base
= NULL
;
3301 qemu_vfree(iov
.iov_base
);
3306 * Forwards an already correctly aligned write request to the BlockDriver.
3308 static int coroutine_fn
bdrv_aligned_pwritev(BlockDriverState
*bs
,
3309 BdrvTrackedRequest
*req
, int64_t offset
, unsigned int bytes
,
3310 QEMUIOVector
*qiov
, int flags
)
3312 BlockDriver
*drv
= bs
->drv
;
3316 int64_t sector_num
= offset
>> BDRV_SECTOR_BITS
;
3317 unsigned int nb_sectors
= bytes
>> BDRV_SECTOR_BITS
;
3319 assert((offset
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3320 assert((bytes
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3322 waited
= wait_serialising_requests(req
);
3323 assert(!waited
|| !req
->serialising
);
3324 assert(req
->overlap_offset
<= offset
);
3325 assert(offset
+ bytes
<= req
->overlap_offset
+ req
->overlap_bytes
);
3327 ret
= notifier_with_return_list_notify(&bs
->before_write_notifiers
, req
);
3329 if (!ret
&& bs
->detect_zeroes
!= BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF
&&
3330 !(flags
& BDRV_REQ_ZERO_WRITE
) && drv
->bdrv_co_write_zeroes
&&
3331 qemu_iovec_is_zero(qiov
)) {
3332 flags
|= BDRV_REQ_ZERO_WRITE
;
3333 if (bs
->detect_zeroes
== BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP
) {
3334 flags
|= BDRV_REQ_MAY_UNMAP
;
3339 /* Do nothing, write notifier decided to fail this request */
3340 } else if (flags
& BDRV_REQ_ZERO_WRITE
) {
3341 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_ZERO
);
3342 ret
= bdrv_co_do_write_zeroes(bs
, sector_num
, nb_sectors
, flags
);
3344 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV
);
3345 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, qiov
);
3347 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_DONE
);
3349 if (ret
== 0 && !bs
->enable_write_cache
) {
3350 ret
= bdrv_co_flush(bs
);
3353 bdrv_set_dirty(bs
, sector_num
, nb_sectors
);
3355 if (bs
->wr_highest_sector
< sector_num
+ nb_sectors
- 1) {
3356 bs
->wr_highest_sector
= sector_num
+ nb_sectors
- 1;
3358 if (bs
->growable
&& ret
>= 0) {
3359 bs
->total_sectors
= MAX(bs
->total_sectors
, sector_num
+ nb_sectors
);
3366 * Handle a write request in coroutine context
3368 static int coroutine_fn
bdrv_co_do_pwritev(BlockDriverState
*bs
,
3369 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
3370 BdrvRequestFlags flags
)
3372 BdrvTrackedRequest req
;
3373 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3374 uint64_t align
= MAX(BDRV_SECTOR_SIZE
, bs
->request_alignment
);
3375 uint8_t *head_buf
= NULL
;
3376 uint8_t *tail_buf
= NULL
;
3377 QEMUIOVector local_qiov
;
3378 bool use_local_qiov
= false;
3384 if (bs
->read_only
) {
3387 if (bdrv_check_byte_request(bs
, offset
, bytes
)) {
3391 /* throttling disk I/O */
3392 if (bs
->io_limits_enabled
) {
3393 bdrv_io_limits_intercept(bs
, bytes
, true);
3397 * Align write if necessary by performing a read-modify-write cycle.
3398 * Pad qiov with the read parts and be sure to have a tracked request not
3399 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3401 tracked_request_begin(&req
, bs
, offset
, bytes
, true);
3403 if (offset
& (align
- 1)) {
3404 QEMUIOVector head_qiov
;
3405 struct iovec head_iov
;
3407 mark_request_serialising(&req
, align
);
3408 wait_serialising_requests(&req
);
3410 head_buf
= qemu_blockalign(bs
, align
);
3411 head_iov
= (struct iovec
) {
3412 .iov_base
= head_buf
,
3415 qemu_iovec_init_external(&head_qiov
, &head_iov
, 1);
3417 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_HEAD
);
3418 ret
= bdrv_aligned_preadv(bs
, &req
, offset
& ~(align
- 1), align
,
3419 align
, &head_qiov
, 0);
3423 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_AFTER_HEAD
);
3425 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 2);
3426 qemu_iovec_add(&local_qiov
, head_buf
, offset
& (align
- 1));
3427 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3428 use_local_qiov
= true;
3430 bytes
+= offset
& (align
- 1);
3431 offset
= offset
& ~(align
- 1);
3434 if ((offset
+ bytes
) & (align
- 1)) {
3435 QEMUIOVector tail_qiov
;
3436 struct iovec tail_iov
;
3440 mark_request_serialising(&req
, align
);
3441 waited
= wait_serialising_requests(&req
);
3442 assert(!waited
|| !use_local_qiov
);
3444 tail_buf
= qemu_blockalign(bs
, align
);
3445 tail_iov
= (struct iovec
) {
3446 .iov_base
= tail_buf
,
3449 qemu_iovec_init_external(&tail_qiov
, &tail_iov
, 1);
3451 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_TAIL
);
3452 ret
= bdrv_aligned_preadv(bs
, &req
, (offset
+ bytes
) & ~(align
- 1), align
,
3453 align
, &tail_qiov
, 0);
3457 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_AFTER_TAIL
);
3459 if (!use_local_qiov
) {
3460 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 1);
3461 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3462 use_local_qiov
= true;
3465 tail_bytes
= (offset
+ bytes
) & (align
- 1);
3466 qemu_iovec_add(&local_qiov
, tail_buf
+ tail_bytes
, align
- tail_bytes
);
3468 bytes
= ROUND_UP(bytes
, align
);
3471 ret
= bdrv_aligned_pwritev(bs
, &req
, offset
, bytes
,
3472 use_local_qiov
? &local_qiov
: qiov
,
3476 tracked_request_end(&req
);
3478 if (use_local_qiov
) {
3479 qemu_iovec_destroy(&local_qiov
);
3481 qemu_vfree(head_buf
);
3482 qemu_vfree(tail_buf
);
3487 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
3488 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
3489 BdrvRequestFlags flags
)
3491 if (nb_sectors
< 0 || nb_sectors
> (INT_MAX
>> BDRV_SECTOR_BITS
)) {
3495 return bdrv_co_do_pwritev(bs
, sector_num
<< BDRV_SECTOR_BITS
,
3496 nb_sectors
<< BDRV_SECTOR_BITS
, qiov
, flags
);
3499 int coroutine_fn
bdrv_co_writev(BlockDriverState
*bs
, int64_t sector_num
,
3500 int nb_sectors
, QEMUIOVector
*qiov
)
3502 trace_bdrv_co_writev(bs
, sector_num
, nb_sectors
);
3504 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, qiov
, 0);
3507 int coroutine_fn
bdrv_co_write_zeroes(BlockDriverState
*bs
,
3508 int64_t sector_num
, int nb_sectors
,
3509 BdrvRequestFlags flags
)
3511 trace_bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
, flags
);
3513 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
3514 flags
&= ~BDRV_REQ_MAY_UNMAP
;
3517 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, NULL
,
3518 BDRV_REQ_ZERO_WRITE
| flags
);
3522 * Truncate file to 'offset' bytes (needed only for file protocols)
3524 int bdrv_truncate(BlockDriverState
*bs
, int64_t offset
)
3526 BlockDriver
*drv
= bs
->drv
;
3530 if (!drv
->bdrv_truncate
)
3534 if (bdrv_op_is_blocked(bs
, BLOCK_OP_TYPE_RESIZE
, NULL
)) {
3537 ret
= drv
->bdrv_truncate(bs
, offset
);
3539 ret
= refresh_total_sectors(bs
, offset
>> BDRV_SECTOR_BITS
);
3540 bdrv_dev_resize_cb(bs
);
3546 * Length of a allocated file in bytes. Sparse files are counted by actual
3547 * allocated space. Return < 0 if error or unknown.
3549 int64_t bdrv_get_allocated_file_size(BlockDriverState
*bs
)
3551 BlockDriver
*drv
= bs
->drv
;
3555 if (drv
->bdrv_get_allocated_file_size
) {
3556 return drv
->bdrv_get_allocated_file_size(bs
);
3559 return bdrv_get_allocated_file_size(bs
->file
);
3565 * Length of a file in bytes. Return < 0 if error or unknown.
3567 int64_t bdrv_getlength(BlockDriverState
*bs
)
3569 BlockDriver
*drv
= bs
->drv
;
3573 if (drv
->has_variable_length
) {
3574 int ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
3579 return bs
->total_sectors
* BDRV_SECTOR_SIZE
;
3582 /* return 0 as number of sectors if no device present or error */
3583 void bdrv_get_geometry(BlockDriverState
*bs
, uint64_t *nb_sectors_ptr
)
3586 length
= bdrv_getlength(bs
);
3590 length
= length
>> BDRV_SECTOR_BITS
;
3591 *nb_sectors_ptr
= length
;
3594 void bdrv_set_on_error(BlockDriverState
*bs
, BlockdevOnError on_read_error
,
3595 BlockdevOnError on_write_error
)
3597 bs
->on_read_error
= on_read_error
;
3598 bs
->on_write_error
= on_write_error
;
3601 BlockdevOnError
bdrv_get_on_error(BlockDriverState
*bs
, bool is_read
)
3603 return is_read
? bs
->on_read_error
: bs
->on_write_error
;
3606 BlockErrorAction
bdrv_get_error_action(BlockDriverState
*bs
, bool is_read
, int error
)
3608 BlockdevOnError on_err
= is_read
? bs
->on_read_error
: bs
->on_write_error
;
3611 case BLOCKDEV_ON_ERROR_ENOSPC
:
3612 return (error
== ENOSPC
) ? BDRV_ACTION_STOP
: BDRV_ACTION_REPORT
;
3613 case BLOCKDEV_ON_ERROR_STOP
:
3614 return BDRV_ACTION_STOP
;
3615 case BLOCKDEV_ON_ERROR_REPORT
:
3616 return BDRV_ACTION_REPORT
;
3617 case BLOCKDEV_ON_ERROR_IGNORE
:
3618 return BDRV_ACTION_IGNORE
;
3624 /* This is done by device models because, while the block layer knows
3625 * about the error, it does not know whether an operation comes from
3626 * the device or the block layer (from a job, for example).
3628 void bdrv_error_action(BlockDriverState
*bs
, BlockErrorAction action
,
3629 bool is_read
, int error
)
3632 bdrv_emit_qmp_error_event(bs
, QEVENT_BLOCK_IO_ERROR
, action
, is_read
);
3633 if (action
== BDRV_ACTION_STOP
) {
3634 vm_stop(RUN_STATE_IO_ERROR
);
3635 bdrv_iostatus_set_err(bs
, error
);
3639 int bdrv_is_read_only(BlockDriverState
*bs
)
3641 return bs
->read_only
;
3644 int bdrv_is_sg(BlockDriverState
*bs
)
3649 int bdrv_enable_write_cache(BlockDriverState
*bs
)
3651 return bs
->enable_write_cache
;
3654 void bdrv_set_enable_write_cache(BlockDriverState
*bs
, bool wce
)
3656 bs
->enable_write_cache
= wce
;
3658 /* so a reopen() will preserve wce */
3660 bs
->open_flags
|= BDRV_O_CACHE_WB
;
3662 bs
->open_flags
&= ~BDRV_O_CACHE_WB
;
3666 int bdrv_is_encrypted(BlockDriverState
*bs
)
3668 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
3670 return bs
->encrypted
;
3673 int bdrv_key_required(BlockDriverState
*bs
)
3675 BlockDriverState
*backing_hd
= bs
->backing_hd
;
3677 if (backing_hd
&& backing_hd
->encrypted
&& !backing_hd
->valid_key
)
3679 return (bs
->encrypted
&& !bs
->valid_key
);
3682 int bdrv_set_key(BlockDriverState
*bs
, const char *key
)
3685 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
) {
3686 ret
= bdrv_set_key(bs
->backing_hd
, key
);
3692 if (!bs
->encrypted
) {
3694 } else if (!bs
->drv
|| !bs
->drv
->bdrv_set_key
) {
3697 ret
= bs
->drv
->bdrv_set_key(bs
, key
);
3700 } else if (!bs
->valid_key
) {
3702 /* call the change callback now, we skipped it on open */
3703 bdrv_dev_change_media_cb(bs
, true);
3708 const char *bdrv_get_format_name(BlockDriverState
*bs
)
3710 return bs
->drv
? bs
->drv
->format_name
: NULL
;
3713 void bdrv_iterate_format(void (*it
)(void *opaque
, const char *name
),
3718 const char **formats
= NULL
;
3720 QLIST_FOREACH(drv
, &bdrv_drivers
, list
) {
3721 if (drv
->format_name
) {
3724 while (formats
&& i
&& !found
) {
3725 found
= !strcmp(formats
[--i
], drv
->format_name
);
3729 formats
= g_realloc(formats
, (count
+ 1) * sizeof(char *));
3730 formats
[count
++] = drv
->format_name
;
3731 it(opaque
, drv
->format_name
);
3738 /* This function is to find block backend bs */
3739 BlockDriverState
*bdrv_find(const char *name
)
3741 BlockDriverState
*bs
;
3743 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3744 if (!strcmp(name
, bs
->device_name
)) {
3751 /* This function is to find a node in the bs graph */
3752 BlockDriverState
*bdrv_find_node(const char *node_name
)
3754 BlockDriverState
*bs
;
3758 QTAILQ_FOREACH(bs
, &graph_bdrv_states
, node_list
) {
3759 if (!strcmp(node_name
, bs
->node_name
)) {
3766 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3767 BlockDeviceInfoList
*bdrv_named_nodes_list(void)
3769 BlockDeviceInfoList
*list
, *entry
;
3770 BlockDriverState
*bs
;
3773 QTAILQ_FOREACH(bs
, &graph_bdrv_states
, node_list
) {
3774 entry
= g_malloc0(sizeof(*entry
));
3775 entry
->value
= bdrv_block_device_info(bs
);
3783 BlockDriverState
*bdrv_lookup_bs(const char *device
,
3784 const char *node_name
,
3787 BlockDriverState
*bs
= NULL
;
3790 bs
= bdrv_find(device
);
3798 bs
= bdrv_find_node(node_name
);
3805 error_setg(errp
, "Cannot find device=%s nor node_name=%s",
3806 device
? device
: "",
3807 node_name
? node_name
: "");
3811 BlockDriverState
*bdrv_next(BlockDriverState
*bs
)
3814 return QTAILQ_FIRST(&bdrv_states
);
3816 return QTAILQ_NEXT(bs
, device_list
);
3819 void bdrv_iterate(void (*it
)(void *opaque
, BlockDriverState
*bs
), void *opaque
)
3821 BlockDriverState
*bs
;
3823 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3828 const char *bdrv_get_device_name(BlockDriverState
*bs
)
3830 return bs
->device_name
;
3833 int bdrv_get_flags(BlockDriverState
*bs
)
3835 return bs
->open_flags
;
3838 int bdrv_flush_all(void)
3840 BlockDriverState
*bs
;
3843 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3844 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
3847 aio_context_acquire(aio_context
);
3848 ret
= bdrv_flush(bs
);
3849 if (ret
< 0 && !result
) {
3852 aio_context_release(aio_context
);
3858 int bdrv_has_zero_init_1(BlockDriverState
*bs
)
3863 int bdrv_has_zero_init(BlockDriverState
*bs
)
3867 /* If BS is a copy on write image, it is initialized to
3868 the contents of the base image, which may not be zeroes. */
3869 if (bs
->backing_hd
) {
3872 if (bs
->drv
->bdrv_has_zero_init
) {
3873 return bs
->drv
->bdrv_has_zero_init(bs
);
3880 bool bdrv_unallocated_blocks_are_zero(BlockDriverState
*bs
)
3882 BlockDriverInfo bdi
;
3884 if (bs
->backing_hd
) {
3888 if (bdrv_get_info(bs
, &bdi
) == 0) {
3889 return bdi
.unallocated_blocks_are_zero
;
3895 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState
*bs
)
3897 BlockDriverInfo bdi
;
3899 if (bs
->backing_hd
|| !(bs
->open_flags
& BDRV_O_UNMAP
)) {
3903 if (bdrv_get_info(bs
, &bdi
) == 0) {
3904 return bdi
.can_write_zeroes_with_unmap
;
3910 typedef struct BdrvCoGetBlockStatusData
{
3911 BlockDriverState
*bs
;
3912 BlockDriverState
*base
;
3918 } BdrvCoGetBlockStatusData
;
3921 * Returns true iff the specified sector is present in the disk image. Drivers
3922 * not implementing the functionality are assumed to not support backing files,
3923 * hence all their sectors are reported as allocated.
3925 * If 'sector_num' is beyond the end of the disk image the return value is 0
3926 * and 'pnum' is set to 0.
3928 * 'pnum' is set to the number of sectors (including and immediately following
3929 * the specified sector) that are known to be in the same
3930 * allocated/unallocated state.
3932 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3933 * beyond the end of the disk image it will be clamped.
3935 static int64_t coroutine_fn
bdrv_co_get_block_status(BlockDriverState
*bs
,
3937 int nb_sectors
, int *pnum
)
3943 length
= bdrv_getlength(bs
);
3948 if (sector_num
>= (length
>> BDRV_SECTOR_BITS
)) {
3953 n
= bs
->total_sectors
- sector_num
;
3954 if (n
< nb_sectors
) {
3958 if (!bs
->drv
->bdrv_co_get_block_status
) {
3960 ret
= BDRV_BLOCK_DATA
| BDRV_BLOCK_ALLOCATED
;
3961 if (bs
->drv
->protocol_name
) {
3962 ret
|= BDRV_BLOCK_OFFSET_VALID
| (sector_num
* BDRV_SECTOR_SIZE
);
3967 ret
= bs
->drv
->bdrv_co_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
3973 if (ret
& BDRV_BLOCK_RAW
) {
3974 assert(ret
& BDRV_BLOCK_OFFSET_VALID
);
3975 return bdrv_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
3979 if (ret
& (BDRV_BLOCK_DATA
| BDRV_BLOCK_ZERO
)) {
3980 ret
|= BDRV_BLOCK_ALLOCATED
;
3983 if (!(ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
)) {
3984 if (bdrv_unallocated_blocks_are_zero(bs
)) {
3985 ret
|= BDRV_BLOCK_ZERO
;
3986 } else if (bs
->backing_hd
) {
3987 BlockDriverState
*bs2
= bs
->backing_hd
;
3988 int64_t length2
= bdrv_getlength(bs2
);
3989 if (length2
>= 0 && sector_num
>= (length2
>> BDRV_SECTOR_BITS
)) {
3990 ret
|= BDRV_BLOCK_ZERO
;
3996 (ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
) &&
3997 (ret
& BDRV_BLOCK_OFFSET_VALID
)) {
3998 ret2
= bdrv_co_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
4001 /* Ignore errors. This is just providing extra information, it
4002 * is useful but not necessary.
4004 ret
|= (ret2
& BDRV_BLOCK_ZERO
);
4011 /* Coroutine wrapper for bdrv_get_block_status() */
4012 static void coroutine_fn
bdrv_get_block_status_co_entry(void *opaque
)
4014 BdrvCoGetBlockStatusData
*data
= opaque
;
4015 BlockDriverState
*bs
= data
->bs
;
4017 data
->ret
= bdrv_co_get_block_status(bs
, data
->sector_num
, data
->nb_sectors
,
4023 * Synchronous wrapper around bdrv_co_get_block_status().
4025 * See bdrv_co_get_block_status() for details.
4027 int64_t bdrv_get_block_status(BlockDriverState
*bs
, int64_t sector_num
,
4028 int nb_sectors
, int *pnum
)
4031 BdrvCoGetBlockStatusData data
= {
4033 .sector_num
= sector_num
,
4034 .nb_sectors
= nb_sectors
,
4039 if (qemu_in_coroutine()) {
4040 /* Fast-path if already in coroutine context */
4041 bdrv_get_block_status_co_entry(&data
);
4043 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
4045 co
= qemu_coroutine_create(bdrv_get_block_status_co_entry
);
4046 qemu_coroutine_enter(co
, &data
);
4047 while (!data
.done
) {
4048 aio_poll(aio_context
, true);
4054 int coroutine_fn
bdrv_is_allocated(BlockDriverState
*bs
, int64_t sector_num
,
4055 int nb_sectors
, int *pnum
)
4057 int64_t ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
4061 return (ret
& BDRV_BLOCK_ALLOCATED
);
4065 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
4067 * Return true if the given sector is allocated in any image between
4068 * BASE and TOP (inclusive). BASE can be NULL to check if the given
4069 * sector is allocated in any image of the chain. Return false otherwise.
4071 * 'pnum' is set to the number of sectors (including and immediately following
4072 * the specified sector) that are known to be in the same
4073 * allocated/unallocated state.
4076 int bdrv_is_allocated_above(BlockDriverState
*top
,
4077 BlockDriverState
*base
,
4079 int nb_sectors
, int *pnum
)
4081 BlockDriverState
*intermediate
;
4082 int ret
, n
= nb_sectors
;
4085 while (intermediate
&& intermediate
!= base
) {
4087 ret
= bdrv_is_allocated(intermediate
, sector_num
, nb_sectors
,
4097 * [sector_num, nb_sectors] is unallocated on top but intermediate
4100 * [sector_num+x, nr_sectors] allocated.
4102 if (n
> pnum_inter
&&
4103 (intermediate
== top
||
4104 sector_num
+ pnum_inter
< intermediate
->total_sectors
)) {
4108 intermediate
= intermediate
->backing_hd
;
4115 const char *bdrv_get_encrypted_filename(BlockDriverState
*bs
)
4117 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
4118 return bs
->backing_file
;
4119 else if (bs
->encrypted
)
4120 return bs
->filename
;
4125 void bdrv_get_backing_filename(BlockDriverState
*bs
,
4126 char *filename
, int filename_size
)
4128 pstrcpy(filename
, filename_size
, bs
->backing_file
);
4131 int bdrv_write_compressed(BlockDriverState
*bs
, int64_t sector_num
,
4132 const uint8_t *buf
, int nb_sectors
)
4134 BlockDriver
*drv
= bs
->drv
;
4137 if (!drv
->bdrv_write_compressed
)
4139 if (bdrv_check_request(bs
, sector_num
, nb_sectors
))
4142 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
4144 return drv
->bdrv_write_compressed(bs
, sector_num
, buf
, nb_sectors
);
4147 int bdrv_get_info(BlockDriverState
*bs
, BlockDriverInfo
*bdi
)
4149 BlockDriver
*drv
= bs
->drv
;
4152 if (!drv
->bdrv_get_info
)
4154 memset(bdi
, 0, sizeof(*bdi
));
4155 return drv
->bdrv_get_info(bs
, bdi
);
4158 ImageInfoSpecific
*bdrv_get_specific_info(BlockDriverState
*bs
)
4160 BlockDriver
*drv
= bs
->drv
;
4161 if (drv
&& drv
->bdrv_get_specific_info
) {
4162 return drv
->bdrv_get_specific_info(bs
);
4167 int bdrv_save_vmstate(BlockDriverState
*bs
, const uint8_t *buf
,
4168 int64_t pos
, int size
)
4171 struct iovec iov
= {
4172 .iov_base
= (void *) buf
,
4176 qemu_iovec_init_external(&qiov
, &iov
, 1);
4177 return bdrv_writev_vmstate(bs
, &qiov
, pos
);
4180 int bdrv_writev_vmstate(BlockDriverState
*bs
, QEMUIOVector
*qiov
, int64_t pos
)
4182 BlockDriver
*drv
= bs
->drv
;
4186 } else if (drv
->bdrv_save_vmstate
) {
4187 return drv
->bdrv_save_vmstate(bs
, qiov
, pos
);
4188 } else if (bs
->file
) {
4189 return bdrv_writev_vmstate(bs
->file
, qiov
, pos
);
4195 int bdrv_load_vmstate(BlockDriverState
*bs
, uint8_t *buf
,
4196 int64_t pos
, int size
)
4198 BlockDriver
*drv
= bs
->drv
;
4201 if (drv
->bdrv_load_vmstate
)
4202 return drv
->bdrv_load_vmstate(bs
, buf
, pos
, size
);
4204 return bdrv_load_vmstate(bs
->file
, buf
, pos
, size
);
4208 void bdrv_debug_event(BlockDriverState
*bs
, BlkDebugEvent event
)
4210 if (!bs
|| !bs
->drv
|| !bs
->drv
->bdrv_debug_event
) {
4214 bs
->drv
->bdrv_debug_event(bs
, event
);
4217 int bdrv_debug_breakpoint(BlockDriverState
*bs
, const char *event
,
4220 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_breakpoint
) {
4224 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_breakpoint
) {
4225 return bs
->drv
->bdrv_debug_breakpoint(bs
, event
, tag
);
4231 int bdrv_debug_remove_breakpoint(BlockDriverState
*bs
, const char *tag
)
4233 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_remove_breakpoint
) {
4237 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_remove_breakpoint
) {
4238 return bs
->drv
->bdrv_debug_remove_breakpoint(bs
, tag
);
4244 int bdrv_debug_resume(BlockDriverState
*bs
, const char *tag
)
4246 while (bs
&& (!bs
->drv
|| !bs
->drv
->bdrv_debug_resume
)) {
4250 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_resume
) {
4251 return bs
->drv
->bdrv_debug_resume(bs
, tag
);
4257 bool bdrv_debug_is_suspended(BlockDriverState
*bs
, const char *tag
)
4259 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_is_suspended
) {
4263 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_is_suspended
) {
4264 return bs
->drv
->bdrv_debug_is_suspended(bs
, tag
);
4270 int bdrv_is_snapshot(BlockDriverState
*bs
)
4272 return !!(bs
->open_flags
& BDRV_O_SNAPSHOT
);
4275 /* backing_file can either be relative, or absolute, or a protocol. If it is
4276 * relative, it must be relative to the chain. So, passing in bs->filename
4277 * from a BDS as backing_file should not be done, as that may be relative to
4278 * the CWD rather than the chain. */
4279 BlockDriverState
*bdrv_find_backing_image(BlockDriverState
*bs
,
4280 const char *backing_file
)
4282 char *filename_full
= NULL
;
4283 char *backing_file_full
= NULL
;
4284 char *filename_tmp
= NULL
;
4285 int is_protocol
= 0;
4286 BlockDriverState
*curr_bs
= NULL
;
4287 BlockDriverState
*retval
= NULL
;
4289 if (!bs
|| !bs
->drv
|| !backing_file
) {
4293 filename_full
= g_malloc(PATH_MAX
);
4294 backing_file_full
= g_malloc(PATH_MAX
);
4295 filename_tmp
= g_malloc(PATH_MAX
);
4297 is_protocol
= path_has_protocol(backing_file
);
4299 for (curr_bs
= bs
; curr_bs
->backing_hd
; curr_bs
= curr_bs
->backing_hd
) {
4301 /* If either of the filename paths is actually a protocol, then
4302 * compare unmodified paths; otherwise make paths relative */
4303 if (is_protocol
|| path_has_protocol(curr_bs
->backing_file
)) {
4304 if (strcmp(backing_file
, curr_bs
->backing_file
) == 0) {
4305 retval
= curr_bs
->backing_hd
;
4309 /* If not an absolute filename path, make it relative to the current
4310 * image's filename path */
4311 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
4314 /* We are going to compare absolute pathnames */
4315 if (!realpath(filename_tmp
, filename_full
)) {
4319 /* We need to make sure the backing filename we are comparing against
4320 * is relative to the current image filename (or absolute) */
4321 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
4322 curr_bs
->backing_file
);
4324 if (!realpath(filename_tmp
, backing_file_full
)) {
4328 if (strcmp(backing_file_full
, filename_full
) == 0) {
4329 retval
= curr_bs
->backing_hd
;
4335 g_free(filename_full
);
4336 g_free(backing_file_full
);
4337 g_free(filename_tmp
);
4341 int bdrv_get_backing_file_depth(BlockDriverState
*bs
)
4347 if (!bs
->backing_hd
) {
4351 return 1 + bdrv_get_backing_file_depth(bs
->backing_hd
);
4354 BlockDriverState
*bdrv_find_base(BlockDriverState
*bs
)
4356 BlockDriverState
*curr_bs
= NULL
;
4364 while (curr_bs
->backing_hd
) {
4365 curr_bs
= curr_bs
->backing_hd
;
4370 /**************************************************************/
4373 BlockDriverAIOCB
*bdrv_aio_readv(BlockDriverState
*bs
, int64_t sector_num
,
4374 QEMUIOVector
*qiov
, int nb_sectors
,
4375 BlockDriverCompletionFunc
*cb
, void *opaque
)
4377 trace_bdrv_aio_readv(bs
, sector_num
, nb_sectors
, opaque
);
4379 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, 0,
4383 BlockDriverAIOCB
*bdrv_aio_writev(BlockDriverState
*bs
, int64_t sector_num
,
4384 QEMUIOVector
*qiov
, int nb_sectors
,
4385 BlockDriverCompletionFunc
*cb
, void *opaque
)
4387 trace_bdrv_aio_writev(bs
, sector_num
, nb_sectors
, opaque
);
4389 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, 0,
4393 BlockDriverAIOCB
*bdrv_aio_write_zeroes(BlockDriverState
*bs
,
4394 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
,
4395 BlockDriverCompletionFunc
*cb
, void *opaque
)
4397 trace_bdrv_aio_write_zeroes(bs
, sector_num
, nb_sectors
, flags
, opaque
);
4399 return bdrv_co_aio_rw_vector(bs
, sector_num
, NULL
, nb_sectors
,
4400 BDRV_REQ_ZERO_WRITE
| flags
,
4405 typedef struct MultiwriteCB
{
4410 BlockDriverCompletionFunc
*cb
;
4412 QEMUIOVector
*free_qiov
;
4416 static void multiwrite_user_cb(MultiwriteCB
*mcb
)
4420 for (i
= 0; i
< mcb
->num_callbacks
; i
++) {
4421 mcb
->callbacks
[i
].cb(mcb
->callbacks
[i
].opaque
, mcb
->error
);
4422 if (mcb
->callbacks
[i
].free_qiov
) {
4423 qemu_iovec_destroy(mcb
->callbacks
[i
].free_qiov
);
4425 g_free(mcb
->callbacks
[i
].free_qiov
);
4429 static void multiwrite_cb(void *opaque
, int ret
)
4431 MultiwriteCB
*mcb
= opaque
;
4433 trace_multiwrite_cb(mcb
, ret
);
4435 if (ret
< 0 && !mcb
->error
) {
4439 mcb
->num_requests
--;
4440 if (mcb
->num_requests
== 0) {
4441 multiwrite_user_cb(mcb
);
4446 static int multiwrite_req_compare(const void *a
, const void *b
)
4448 const BlockRequest
*req1
= a
, *req2
= b
;
4451 * Note that we can't simply subtract req2->sector from req1->sector
4452 * here as that could overflow the return value.
4454 if (req1
->sector
> req2
->sector
) {
4456 } else if (req1
->sector
< req2
->sector
) {
4464 * Takes a bunch of requests and tries to merge them. Returns the number of
4465 * requests that remain after merging.
4467 static int multiwrite_merge(BlockDriverState
*bs
, BlockRequest
*reqs
,
4468 int num_reqs
, MultiwriteCB
*mcb
)
4472 // Sort requests by start sector
4473 qsort(reqs
, num_reqs
, sizeof(*reqs
), &multiwrite_req_compare
);
4475 // Check if adjacent requests touch the same clusters. If so, combine them,
4476 // filling up gaps with zero sectors.
4478 for (i
= 1; i
< num_reqs
; i
++) {
4480 int64_t oldreq_last
= reqs
[outidx
].sector
+ reqs
[outidx
].nb_sectors
;
4482 // Handle exactly sequential writes and overlapping writes.
4483 if (reqs
[i
].sector
<= oldreq_last
) {
4487 if (reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1 > IOV_MAX
) {
4493 QEMUIOVector
*qiov
= g_malloc0(sizeof(*qiov
));
4494 qemu_iovec_init(qiov
,
4495 reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1);
4497 // Add the first request to the merged one. If the requests are
4498 // overlapping, drop the last sectors of the first request.
4499 size
= (reqs
[i
].sector
- reqs
[outidx
].sector
) << 9;
4500 qemu_iovec_concat(qiov
, reqs
[outidx
].qiov
, 0, size
);
4502 // We should need to add any zeros between the two requests
4503 assert (reqs
[i
].sector
<= oldreq_last
);
4505 // Add the second request
4506 qemu_iovec_concat(qiov
, reqs
[i
].qiov
, 0, reqs
[i
].qiov
->size
);
4508 reqs
[outidx
].nb_sectors
= qiov
->size
>> 9;
4509 reqs
[outidx
].qiov
= qiov
;
4511 mcb
->callbacks
[i
].free_qiov
= reqs
[outidx
].qiov
;
4514 reqs
[outidx
].sector
= reqs
[i
].sector
;
4515 reqs
[outidx
].nb_sectors
= reqs
[i
].nb_sectors
;
4516 reqs
[outidx
].qiov
= reqs
[i
].qiov
;
4524 * Submit multiple AIO write requests at once.
4526 * On success, the function returns 0 and all requests in the reqs array have
4527 * been submitted. In error case this function returns -1, and any of the
4528 * requests may or may not be submitted yet. In particular, this means that the
4529 * callback will be called for some of the requests, for others it won't. The
4530 * caller must check the error field of the BlockRequest to wait for the right
4531 * callbacks (if error != 0, no callback will be called).
4533 * The implementation may modify the contents of the reqs array, e.g. to merge
4534 * requests. However, the fields opaque and error are left unmodified as they
4535 * are used to signal failure for a single request to the caller.
4537 int bdrv_aio_multiwrite(BlockDriverState
*bs
, BlockRequest
*reqs
, int num_reqs
)
4542 /* don't submit writes if we don't have a medium */
4543 if (bs
->drv
== NULL
) {
4544 for (i
= 0; i
< num_reqs
; i
++) {
4545 reqs
[i
].error
= -ENOMEDIUM
;
4550 if (num_reqs
== 0) {
4554 // Create MultiwriteCB structure
4555 mcb
= g_malloc0(sizeof(*mcb
) + num_reqs
* sizeof(*mcb
->callbacks
));
4556 mcb
->num_requests
= 0;
4557 mcb
->num_callbacks
= num_reqs
;
4559 for (i
= 0; i
< num_reqs
; i
++) {
4560 mcb
->callbacks
[i
].cb
= reqs
[i
].cb
;
4561 mcb
->callbacks
[i
].opaque
= reqs
[i
].opaque
;
4564 // Check for mergable requests
4565 num_reqs
= multiwrite_merge(bs
, reqs
, num_reqs
, mcb
);
4567 trace_bdrv_aio_multiwrite(mcb
, mcb
->num_callbacks
, num_reqs
);
4569 /* Run the aio requests. */
4570 mcb
->num_requests
= num_reqs
;
4571 for (i
= 0; i
< num_reqs
; i
++) {
4572 bdrv_co_aio_rw_vector(bs
, reqs
[i
].sector
, reqs
[i
].qiov
,
4573 reqs
[i
].nb_sectors
, reqs
[i
].flags
,
4581 void bdrv_aio_cancel(BlockDriverAIOCB
*acb
)
4583 acb
->aiocb_info
->cancel(acb
);
4586 /**************************************************************/
4587 /* async block device emulation */
4589 typedef struct BlockDriverAIOCBSync
{
4590 BlockDriverAIOCB common
;
4593 /* vector translation state */
4597 } BlockDriverAIOCBSync
;
4599 static void bdrv_aio_cancel_em(BlockDriverAIOCB
*blockacb
)
4601 BlockDriverAIOCBSync
*acb
=
4602 container_of(blockacb
, BlockDriverAIOCBSync
, common
);
4603 qemu_bh_delete(acb
->bh
);
4605 qemu_aio_release(acb
);
4608 static const AIOCBInfo bdrv_em_aiocb_info
= {
4609 .aiocb_size
= sizeof(BlockDriverAIOCBSync
),
4610 .cancel
= bdrv_aio_cancel_em
,
4613 static void bdrv_aio_bh_cb(void *opaque
)
4615 BlockDriverAIOCBSync
*acb
= opaque
;
4618 qemu_iovec_from_buf(acb
->qiov
, 0, acb
->bounce
, acb
->qiov
->size
);
4619 qemu_vfree(acb
->bounce
);
4620 acb
->common
.cb(acb
->common
.opaque
, acb
->ret
);
4621 qemu_bh_delete(acb
->bh
);
4623 qemu_aio_release(acb
);
4626 static BlockDriverAIOCB
*bdrv_aio_rw_vector(BlockDriverState
*bs
,
4630 BlockDriverCompletionFunc
*cb
,
4635 BlockDriverAIOCBSync
*acb
;
4637 acb
= qemu_aio_get(&bdrv_em_aiocb_info
, bs
, cb
, opaque
);
4638 acb
->is_write
= is_write
;
4640 acb
->bounce
= qemu_blockalign(bs
, qiov
->size
);
4641 acb
->bh
= aio_bh_new(bdrv_get_aio_context(bs
), bdrv_aio_bh_cb
, acb
);
4644 qemu_iovec_to_buf(acb
->qiov
, 0, acb
->bounce
, qiov
->size
);
4645 acb
->ret
= bs
->drv
->bdrv_write(bs
, sector_num
, acb
->bounce
, nb_sectors
);
4647 acb
->ret
= bs
->drv
->bdrv_read(bs
, sector_num
, acb
->bounce
, nb_sectors
);
4650 qemu_bh_schedule(acb
->bh
);
4652 return &acb
->common
;
4655 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
4656 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
4657 BlockDriverCompletionFunc
*cb
, void *opaque
)
4659 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 0);
4662 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
4663 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
4664 BlockDriverCompletionFunc
*cb
, void *opaque
)
4666 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 1);
4670 typedef struct BlockDriverAIOCBCoroutine
{
4671 BlockDriverAIOCB common
;
4676 } BlockDriverAIOCBCoroutine
;
4678 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB
*blockacb
)
4680 AioContext
*aio_context
= bdrv_get_aio_context(blockacb
->bs
);
4681 BlockDriverAIOCBCoroutine
*acb
=
4682 container_of(blockacb
, BlockDriverAIOCBCoroutine
, common
);
4687 aio_poll(aio_context
, true);
4691 static const AIOCBInfo bdrv_em_co_aiocb_info
= {
4692 .aiocb_size
= sizeof(BlockDriverAIOCBCoroutine
),
4693 .cancel
= bdrv_aio_co_cancel_em
,
4696 static void bdrv_co_em_bh(void *opaque
)
4698 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4700 acb
->common
.cb(acb
->common
.opaque
, acb
->req
.error
);
4706 qemu_bh_delete(acb
->bh
);
4707 qemu_aio_release(acb
);
4710 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4711 static void coroutine_fn
bdrv_co_do_rw(void *opaque
)
4713 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4714 BlockDriverState
*bs
= acb
->common
.bs
;
4716 if (!acb
->is_write
) {
4717 acb
->req
.error
= bdrv_co_do_readv(bs
, acb
->req
.sector
,
4718 acb
->req
.nb_sectors
, acb
->req
.qiov
, acb
->req
.flags
);
4720 acb
->req
.error
= bdrv_co_do_writev(bs
, acb
->req
.sector
,
4721 acb
->req
.nb_sectors
, acb
->req
.qiov
, acb
->req
.flags
);
4724 acb
->bh
= aio_bh_new(bdrv_get_aio_context(bs
), bdrv_co_em_bh
, acb
);
4725 qemu_bh_schedule(acb
->bh
);
4728 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
4732 BdrvRequestFlags flags
,
4733 BlockDriverCompletionFunc
*cb
,
4738 BlockDriverAIOCBCoroutine
*acb
;
4740 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4741 acb
->req
.sector
= sector_num
;
4742 acb
->req
.nb_sectors
= nb_sectors
;
4743 acb
->req
.qiov
= qiov
;
4744 acb
->req
.flags
= flags
;
4745 acb
->is_write
= is_write
;
4748 co
= qemu_coroutine_create(bdrv_co_do_rw
);
4749 qemu_coroutine_enter(co
, acb
);
4751 return &acb
->common
;
4754 static void coroutine_fn
bdrv_aio_flush_co_entry(void *opaque
)
4756 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4757 BlockDriverState
*bs
= acb
->common
.bs
;
4759 acb
->req
.error
= bdrv_co_flush(bs
);
4760 acb
->bh
= aio_bh_new(bdrv_get_aio_context(bs
), bdrv_co_em_bh
, acb
);
4761 qemu_bh_schedule(acb
->bh
);
4764 BlockDriverAIOCB
*bdrv_aio_flush(BlockDriverState
*bs
,
4765 BlockDriverCompletionFunc
*cb
, void *opaque
)
4767 trace_bdrv_aio_flush(bs
, opaque
);
4770 BlockDriverAIOCBCoroutine
*acb
;
4772 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4775 co
= qemu_coroutine_create(bdrv_aio_flush_co_entry
);
4776 qemu_coroutine_enter(co
, acb
);
4778 return &acb
->common
;
4781 static void coroutine_fn
bdrv_aio_discard_co_entry(void *opaque
)
4783 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4784 BlockDriverState
*bs
= acb
->common
.bs
;
4786 acb
->req
.error
= bdrv_co_discard(bs
, acb
->req
.sector
, acb
->req
.nb_sectors
);
4787 acb
->bh
= aio_bh_new(bdrv_get_aio_context(bs
), bdrv_co_em_bh
, acb
);
4788 qemu_bh_schedule(acb
->bh
);
4791 BlockDriverAIOCB
*bdrv_aio_discard(BlockDriverState
*bs
,
4792 int64_t sector_num
, int nb_sectors
,
4793 BlockDriverCompletionFunc
*cb
, void *opaque
)
4796 BlockDriverAIOCBCoroutine
*acb
;
4798 trace_bdrv_aio_discard(bs
, sector_num
, nb_sectors
, opaque
);
4800 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4801 acb
->req
.sector
= sector_num
;
4802 acb
->req
.nb_sectors
= nb_sectors
;
4804 co
= qemu_coroutine_create(bdrv_aio_discard_co_entry
);
4805 qemu_coroutine_enter(co
, acb
);
4807 return &acb
->common
;
4810 void bdrv_init(void)
4812 module_call_init(MODULE_INIT_BLOCK
);
4815 void bdrv_init_with_whitelist(void)
4817 use_bdrv_whitelist
= 1;
4821 void *qemu_aio_get(const AIOCBInfo
*aiocb_info
, BlockDriverState
*bs
,
4822 BlockDriverCompletionFunc
*cb
, void *opaque
)
4824 BlockDriverAIOCB
*acb
;
4826 acb
= g_slice_alloc(aiocb_info
->aiocb_size
);
4827 acb
->aiocb_info
= aiocb_info
;
4830 acb
->opaque
= opaque
;
4834 void qemu_aio_release(void *p
)
4836 BlockDriverAIOCB
*acb
= p
;
4837 g_slice_free1(acb
->aiocb_info
->aiocb_size
, acb
);
4840 /**************************************************************/
4841 /* Coroutine block device emulation */
4843 typedef struct CoroutineIOCompletion
{
4844 Coroutine
*coroutine
;
4846 } CoroutineIOCompletion
;
4848 static void bdrv_co_io_em_complete(void *opaque
, int ret
)
4850 CoroutineIOCompletion
*co
= opaque
;
4853 qemu_coroutine_enter(co
->coroutine
, NULL
);
4856 static int coroutine_fn
bdrv_co_io_em(BlockDriverState
*bs
, int64_t sector_num
,
4857 int nb_sectors
, QEMUIOVector
*iov
,
4860 CoroutineIOCompletion co
= {
4861 .coroutine
= qemu_coroutine_self(),
4863 BlockDriverAIOCB
*acb
;
4866 acb
= bs
->drv
->bdrv_aio_writev(bs
, sector_num
, iov
, nb_sectors
,
4867 bdrv_co_io_em_complete
, &co
);
4869 acb
= bs
->drv
->bdrv_aio_readv(bs
, sector_num
, iov
, nb_sectors
,
4870 bdrv_co_io_em_complete
, &co
);
4873 trace_bdrv_co_io_em(bs
, sector_num
, nb_sectors
, is_write
, acb
);
4877 qemu_coroutine_yield();
4882 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
4883 int64_t sector_num
, int nb_sectors
,
4886 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, false);
4889 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
4890 int64_t sector_num
, int nb_sectors
,
4893 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, true);
4896 static void coroutine_fn
bdrv_flush_co_entry(void *opaque
)
4898 RwCo
*rwco
= opaque
;
4900 rwco
->ret
= bdrv_co_flush(rwco
->bs
);
4903 int coroutine_fn
bdrv_co_flush(BlockDriverState
*bs
)
4907 if (!bs
|| !bdrv_is_inserted(bs
) || bdrv_is_read_only(bs
)) {
4911 /* Write back cached data to the OS even with cache=unsafe */
4912 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_OS
);
4913 if (bs
->drv
->bdrv_co_flush_to_os
) {
4914 ret
= bs
->drv
->bdrv_co_flush_to_os(bs
);
4920 /* But don't actually force it to the disk with cache=unsafe */
4921 if (bs
->open_flags
& BDRV_O_NO_FLUSH
) {
4925 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_DISK
);
4926 if (bs
->drv
->bdrv_co_flush_to_disk
) {
4927 ret
= bs
->drv
->bdrv_co_flush_to_disk(bs
);
4928 } else if (bs
->drv
->bdrv_aio_flush
) {
4929 BlockDriverAIOCB
*acb
;
4930 CoroutineIOCompletion co
= {
4931 .coroutine
= qemu_coroutine_self(),
4934 acb
= bs
->drv
->bdrv_aio_flush(bs
, bdrv_co_io_em_complete
, &co
);
4938 qemu_coroutine_yield();
4943 * Some block drivers always operate in either writethrough or unsafe
4944 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4945 * know how the server works (because the behaviour is hardcoded or
4946 * depends on server-side configuration), so we can't ensure that
4947 * everything is safe on disk. Returning an error doesn't work because
4948 * that would break guests even if the server operates in writethrough
4951 * Let's hope the user knows what he's doing.
4959 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4960 * in the case of cache=unsafe, so there are no useless flushes.
4963 return bdrv_co_flush(bs
->file
);
4966 void bdrv_invalidate_cache(BlockDriverState
*bs
, Error
**errp
)
4968 Error
*local_err
= NULL
;
4975 if (bs
->drv
->bdrv_invalidate_cache
) {
4976 bs
->drv
->bdrv_invalidate_cache(bs
, &local_err
);
4977 } else if (bs
->file
) {
4978 bdrv_invalidate_cache(bs
->file
, &local_err
);
4981 error_propagate(errp
, local_err
);
4985 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
4987 error_setg_errno(errp
, -ret
, "Could not refresh total sector count");
4992 void bdrv_invalidate_cache_all(Error
**errp
)
4994 BlockDriverState
*bs
;
4995 Error
*local_err
= NULL
;
4997 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
4998 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
5000 aio_context_acquire(aio_context
);
5001 bdrv_invalidate_cache(bs
, &local_err
);
5002 aio_context_release(aio_context
);
5004 error_propagate(errp
, local_err
);
5010 void bdrv_clear_incoming_migration_all(void)
5012 BlockDriverState
*bs
;
5014 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
5015 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
5017 aio_context_acquire(aio_context
);
5018 bs
->open_flags
= bs
->open_flags
& ~(BDRV_O_INCOMING
);
5019 aio_context_release(aio_context
);
5023 int bdrv_flush(BlockDriverState
*bs
)
5031 if (qemu_in_coroutine()) {
5032 /* Fast-path if already in coroutine context */
5033 bdrv_flush_co_entry(&rwco
);
5035 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
5037 co
= qemu_coroutine_create(bdrv_flush_co_entry
);
5038 qemu_coroutine_enter(co
, &rwco
);
5039 while (rwco
.ret
== NOT_DONE
) {
5040 aio_poll(aio_context
, true);
5047 typedef struct DiscardCo
{
5048 BlockDriverState
*bs
;
5053 static void coroutine_fn
bdrv_discard_co_entry(void *opaque
)
5055 DiscardCo
*rwco
= opaque
;
5057 rwco
->ret
= bdrv_co_discard(rwco
->bs
, rwco
->sector_num
, rwco
->nb_sectors
);
5060 /* if no limit is specified in the BlockLimits use a default
5061 * of 32768 512-byte sectors (16 MiB) per request.
5063 #define MAX_DISCARD_DEFAULT 32768
5065 int coroutine_fn
bdrv_co_discard(BlockDriverState
*bs
, int64_t sector_num
,
5072 } else if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
5074 } else if (bs
->read_only
) {
5078 bdrv_reset_dirty(bs
, sector_num
, nb_sectors
);
5080 /* Do nothing if disabled. */
5081 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
5085 if (!bs
->drv
->bdrv_co_discard
&& !bs
->drv
->bdrv_aio_discard
) {
5089 max_discard
= bs
->bl
.max_discard
? bs
->bl
.max_discard
: MAX_DISCARD_DEFAULT
;
5090 while (nb_sectors
> 0) {
5092 int num
= nb_sectors
;
5095 if (bs
->bl
.discard_alignment
&&
5096 num
>= bs
->bl
.discard_alignment
&&
5097 sector_num
% bs
->bl
.discard_alignment
) {
5098 if (num
> bs
->bl
.discard_alignment
) {
5099 num
= bs
->bl
.discard_alignment
;
5101 num
-= sector_num
% bs
->bl
.discard_alignment
;
5104 /* limit request size */
5105 if (num
> max_discard
) {
5109 if (bs
->drv
->bdrv_co_discard
) {
5110 ret
= bs
->drv
->bdrv_co_discard(bs
, sector_num
, num
);
5112 BlockDriverAIOCB
*acb
;
5113 CoroutineIOCompletion co
= {
5114 .coroutine
= qemu_coroutine_self(),
5117 acb
= bs
->drv
->bdrv_aio_discard(bs
, sector_num
, nb_sectors
,
5118 bdrv_co_io_em_complete
, &co
);
5122 qemu_coroutine_yield();
5126 if (ret
&& ret
!= -ENOTSUP
) {
5136 int bdrv_discard(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
)
5141 .sector_num
= sector_num
,
5142 .nb_sectors
= nb_sectors
,
5146 if (qemu_in_coroutine()) {
5147 /* Fast-path if already in coroutine context */
5148 bdrv_discard_co_entry(&rwco
);
5150 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
5152 co
= qemu_coroutine_create(bdrv_discard_co_entry
);
5153 qemu_coroutine_enter(co
, &rwco
);
5154 while (rwco
.ret
== NOT_DONE
) {
5155 aio_poll(aio_context
, true);
5162 /**************************************************************/
5163 /* removable device support */
5166 * Return TRUE if the media is present
5168 int bdrv_is_inserted(BlockDriverState
*bs
)
5170 BlockDriver
*drv
= bs
->drv
;
5174 if (!drv
->bdrv_is_inserted
)
5176 return drv
->bdrv_is_inserted(bs
);
5180 * Return whether the media changed since the last call to this
5181 * function, or -ENOTSUP if we don't know. Most drivers don't know.
5183 int bdrv_media_changed(BlockDriverState
*bs
)
5185 BlockDriver
*drv
= bs
->drv
;
5187 if (drv
&& drv
->bdrv_media_changed
) {
5188 return drv
->bdrv_media_changed(bs
);
5194 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5196 void bdrv_eject(BlockDriverState
*bs
, bool eject_flag
)
5198 BlockDriver
*drv
= bs
->drv
;
5200 if (drv
&& drv
->bdrv_eject
) {
5201 drv
->bdrv_eject(bs
, eject_flag
);
5204 if (bs
->device_name
[0] != '\0') {
5205 bdrv_emit_qmp_eject_event(bs
, eject_flag
);
5210 * Lock or unlock the media (if it is locked, the user won't be able
5211 * to eject it manually).
5213 void bdrv_lock_medium(BlockDriverState
*bs
, bool locked
)
5215 BlockDriver
*drv
= bs
->drv
;
5217 trace_bdrv_lock_medium(bs
, locked
);
5219 if (drv
&& drv
->bdrv_lock_medium
) {
5220 drv
->bdrv_lock_medium(bs
, locked
);
5224 /* needed for generic scsi interface */
5226 int bdrv_ioctl(BlockDriverState
*bs
, unsigned long int req
, void *buf
)
5228 BlockDriver
*drv
= bs
->drv
;
5230 if (drv
&& drv
->bdrv_ioctl
)
5231 return drv
->bdrv_ioctl(bs
, req
, buf
);
5235 BlockDriverAIOCB
*bdrv_aio_ioctl(BlockDriverState
*bs
,
5236 unsigned long int req
, void *buf
,
5237 BlockDriverCompletionFunc
*cb
, void *opaque
)
5239 BlockDriver
*drv
= bs
->drv
;
5241 if (drv
&& drv
->bdrv_aio_ioctl
)
5242 return drv
->bdrv_aio_ioctl(bs
, req
, buf
, cb
, opaque
);
5246 void bdrv_set_guest_block_size(BlockDriverState
*bs
, int align
)
5248 bs
->guest_block_size
= align
;
5251 void *qemu_blockalign(BlockDriverState
*bs
, size_t size
)
5253 return qemu_memalign(bdrv_opt_mem_align(bs
), size
);
5257 * Check if all memory in this vector is sector aligned.
5259 bool bdrv_qiov_is_aligned(BlockDriverState
*bs
, QEMUIOVector
*qiov
)
5262 size_t alignment
= bdrv_opt_mem_align(bs
);
5264 for (i
= 0; i
< qiov
->niov
; i
++) {
5265 if ((uintptr_t) qiov
->iov
[i
].iov_base
% alignment
) {
5268 if (qiov
->iov
[i
].iov_len
% alignment
) {
5276 BdrvDirtyBitmap
*bdrv_create_dirty_bitmap(BlockDriverState
*bs
, int granularity
,
5279 int64_t bitmap_size
;
5280 BdrvDirtyBitmap
*bitmap
;
5282 assert((granularity
& (granularity
- 1)) == 0);
5284 granularity
>>= BDRV_SECTOR_BITS
;
5285 assert(granularity
);
5286 bitmap_size
= bdrv_getlength(bs
);
5287 if (bitmap_size
< 0) {
5288 error_setg_errno(errp
, -bitmap_size
, "could not get length of device");
5289 errno
= -bitmap_size
;
5292 bitmap_size
>>= BDRV_SECTOR_BITS
;
5293 bitmap
= g_malloc0(sizeof(BdrvDirtyBitmap
));
5294 bitmap
->bitmap
= hbitmap_alloc(bitmap_size
, ffs(granularity
) - 1);
5295 QLIST_INSERT_HEAD(&bs
->dirty_bitmaps
, bitmap
, list
);
5299 void bdrv_release_dirty_bitmap(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
5301 BdrvDirtyBitmap
*bm
, *next
;
5302 QLIST_FOREACH_SAFE(bm
, &bs
->dirty_bitmaps
, list
, next
) {
5304 QLIST_REMOVE(bitmap
, list
);
5305 hbitmap_free(bitmap
->bitmap
);
5312 BlockDirtyInfoList
*bdrv_query_dirty_bitmaps(BlockDriverState
*bs
)
5314 BdrvDirtyBitmap
*bm
;
5315 BlockDirtyInfoList
*list
= NULL
;
5316 BlockDirtyInfoList
**plist
= &list
;
5318 QLIST_FOREACH(bm
, &bs
->dirty_bitmaps
, list
) {
5319 BlockDirtyInfo
*info
= g_malloc0(sizeof(BlockDirtyInfo
));
5320 BlockDirtyInfoList
*entry
= g_malloc0(sizeof(BlockDirtyInfoList
));
5321 info
->count
= bdrv_get_dirty_count(bs
, bm
);
5323 ((int64_t) BDRV_SECTOR_SIZE
<< hbitmap_granularity(bm
->bitmap
));
5324 entry
->value
= info
;
5326 plist
= &entry
->next
;
5332 int bdrv_get_dirty(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
, int64_t sector
)
5335 return hbitmap_get(bitmap
->bitmap
, sector
);
5341 void bdrv_dirty_iter_init(BlockDriverState
*bs
,
5342 BdrvDirtyBitmap
*bitmap
, HBitmapIter
*hbi
)
5344 hbitmap_iter_init(hbi
, bitmap
->bitmap
, 0);
5347 void bdrv_set_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
5350 BdrvDirtyBitmap
*bitmap
;
5351 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
5352 hbitmap_set(bitmap
->bitmap
, cur_sector
, nr_sectors
);
5356 void bdrv_reset_dirty(BlockDriverState
*bs
, int64_t cur_sector
, int nr_sectors
)
5358 BdrvDirtyBitmap
*bitmap
;
5359 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
5360 hbitmap_reset(bitmap
->bitmap
, cur_sector
, nr_sectors
);
5364 int64_t bdrv_get_dirty_count(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
5366 return hbitmap_count(bitmap
->bitmap
);
5369 /* Get a reference to bs */
5370 void bdrv_ref(BlockDriverState
*bs
)
5375 /* Release a previously grabbed reference to bs.
5376 * If after releasing, reference count is zero, the BlockDriverState is
5378 void bdrv_unref(BlockDriverState
*bs
)
5380 assert(bs
->refcnt
> 0);
5381 if (--bs
->refcnt
== 0) {
5386 struct BdrvOpBlocker
{
5388 QLIST_ENTRY(BdrvOpBlocker
) list
;
5391 bool bdrv_op_is_blocked(BlockDriverState
*bs
, BlockOpType op
, Error
**errp
)
5393 BdrvOpBlocker
*blocker
;
5394 assert((int) op
>= 0 && op
< BLOCK_OP_TYPE_MAX
);
5395 if (!QLIST_EMPTY(&bs
->op_blockers
[op
])) {
5396 blocker
= QLIST_FIRST(&bs
->op_blockers
[op
]);
5398 error_setg(errp
, "Device '%s' is busy: %s",
5399 bs
->device_name
, error_get_pretty(blocker
->reason
));
5406 void bdrv_op_block(BlockDriverState
*bs
, BlockOpType op
, Error
*reason
)
5408 BdrvOpBlocker
*blocker
;
5409 assert((int) op
>= 0 && op
< BLOCK_OP_TYPE_MAX
);
5411 blocker
= g_malloc0(sizeof(BdrvOpBlocker
));
5412 blocker
->reason
= reason
;
5413 QLIST_INSERT_HEAD(&bs
->op_blockers
[op
], blocker
, list
);
5416 void bdrv_op_unblock(BlockDriverState
*bs
, BlockOpType op
, Error
*reason
)
5418 BdrvOpBlocker
*blocker
, *next
;
5419 assert((int) op
>= 0 && op
< BLOCK_OP_TYPE_MAX
);
5420 QLIST_FOREACH_SAFE(blocker
, &bs
->op_blockers
[op
], list
, next
) {
5421 if (blocker
->reason
== reason
) {
5422 QLIST_REMOVE(blocker
, list
);
5428 void bdrv_op_block_all(BlockDriverState
*bs
, Error
*reason
)
5431 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
5432 bdrv_op_block(bs
, i
, reason
);
5436 void bdrv_op_unblock_all(BlockDriverState
*bs
, Error
*reason
)
5439 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
5440 bdrv_op_unblock(bs
, i
, reason
);
5444 bool bdrv_op_blocker_is_empty(BlockDriverState
*bs
)
5448 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
5449 if (!QLIST_EMPTY(&bs
->op_blockers
[i
])) {
5456 void bdrv_iostatus_enable(BlockDriverState
*bs
)
5458 bs
->iostatus_enabled
= true;
5459 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
5462 /* The I/O status is only enabled if the drive explicitly
5463 * enables it _and_ the VM is configured to stop on errors */
5464 bool bdrv_iostatus_is_enabled(const BlockDriverState
*bs
)
5466 return (bs
->iostatus_enabled
&&
5467 (bs
->on_write_error
== BLOCKDEV_ON_ERROR_ENOSPC
||
5468 bs
->on_write_error
== BLOCKDEV_ON_ERROR_STOP
||
5469 bs
->on_read_error
== BLOCKDEV_ON_ERROR_STOP
));
5472 void bdrv_iostatus_disable(BlockDriverState
*bs
)
5474 bs
->iostatus_enabled
= false;
5477 void bdrv_iostatus_reset(BlockDriverState
*bs
)
5479 if (bdrv_iostatus_is_enabled(bs
)) {
5480 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
5482 block_job_iostatus_reset(bs
->job
);
5487 void bdrv_iostatus_set_err(BlockDriverState
*bs
, int error
)
5489 assert(bdrv_iostatus_is_enabled(bs
));
5490 if (bs
->iostatus
== BLOCK_DEVICE_IO_STATUS_OK
) {
5491 bs
->iostatus
= error
== ENOSPC
? BLOCK_DEVICE_IO_STATUS_NOSPACE
:
5492 BLOCK_DEVICE_IO_STATUS_FAILED
;
5497 bdrv_acct_start(BlockDriverState
*bs
, BlockAcctCookie
*cookie
, int64_t bytes
,
5498 enum BlockAcctType type
)
5500 assert(type
< BDRV_MAX_IOTYPE
);
5502 cookie
->bytes
= bytes
;
5503 cookie
->start_time_ns
= get_clock();
5504 cookie
->type
= type
;
5508 bdrv_acct_done(BlockDriverState
*bs
, BlockAcctCookie
*cookie
)
5510 assert(cookie
->type
< BDRV_MAX_IOTYPE
);
5512 bs
->nr_bytes
[cookie
->type
] += cookie
->bytes
;
5513 bs
->nr_ops
[cookie
->type
]++;
5514 bs
->total_time_ns
[cookie
->type
] += get_clock() - cookie
->start_time_ns
;
5517 void bdrv_img_create(const char *filename
, const char *fmt
,
5518 const char *base_filename
, const char *base_fmt
,
5519 char *options
, uint64_t img_size
, int flags
,
5520 Error
**errp
, bool quiet
)
5522 QEMUOptionParameter
*param
= NULL
, *create_options
= NULL
;
5523 QEMUOptionParameter
*backing_fmt
, *backing_file
, *size
;
5524 BlockDriver
*drv
, *proto_drv
;
5525 BlockDriver
*backing_drv
= NULL
;
5526 Error
*local_err
= NULL
;
5529 /* Find driver and parse its options */
5530 drv
= bdrv_find_format(fmt
);
5532 error_setg(errp
, "Unknown file format '%s'", fmt
);
5536 proto_drv
= bdrv_find_protocol(filename
, true);
5538 error_setg(errp
, "Unknown protocol '%s'", filename
);
5542 create_options
= append_option_parameters(create_options
,
5543 drv
->create_options
);
5544 create_options
= append_option_parameters(create_options
,
5545 proto_drv
->create_options
);
5547 /* Create parameter list with default values */
5548 param
= parse_option_parameters("", create_options
, param
);
5550 set_option_parameter_int(param
, BLOCK_OPT_SIZE
, img_size
);
5552 /* Parse -o options */
5554 param
= parse_option_parameters(options
, create_options
, param
);
5555 if (param
== NULL
) {
5556 error_setg(errp
, "Invalid options for file format '%s'.", fmt
);
5561 if (base_filename
) {
5562 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FILE
,
5564 error_setg(errp
, "Backing file not supported for file format '%s'",
5571 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FMT
, base_fmt
)) {
5572 error_setg(errp
, "Backing file format not supported for file "
5573 "format '%s'", fmt
);
5578 backing_file
= get_option_parameter(param
, BLOCK_OPT_BACKING_FILE
);
5579 if (backing_file
&& backing_file
->value
.s
) {
5580 if (!strcmp(filename
, backing_file
->value
.s
)) {
5581 error_setg(errp
, "Error: Trying to create an image with the "
5582 "same filename as the backing file");
5587 backing_fmt
= get_option_parameter(param
, BLOCK_OPT_BACKING_FMT
);
5588 if (backing_fmt
&& backing_fmt
->value
.s
) {
5589 backing_drv
= bdrv_find_format(backing_fmt
->value
.s
);
5591 error_setg(errp
, "Unknown backing file format '%s'",
5592 backing_fmt
->value
.s
);
5597 // The size for the image must always be specified, with one exception:
5598 // If we are using a backing file, we can obtain the size from there
5599 size
= get_option_parameter(param
, BLOCK_OPT_SIZE
);
5600 if (size
&& size
->value
.n
== -1) {
5601 if (backing_file
&& backing_file
->value
.s
) {
5602 BlockDriverState
*bs
;
5607 /* backing files always opened read-only */
5609 flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
5612 ret
= bdrv_open(&bs
, backing_file
->value
.s
, NULL
, NULL
, back_flags
,
5613 backing_drv
, &local_err
);
5615 error_setg_errno(errp
, -ret
, "Could not open '%s': %s",
5616 backing_file
->value
.s
,
5617 error_get_pretty(local_err
));
5618 error_free(local_err
);
5622 bdrv_get_geometry(bs
, &size
);
5625 snprintf(buf
, sizeof(buf
), "%" PRId64
, size
);
5626 set_option_parameter(param
, BLOCK_OPT_SIZE
, buf
);
5630 error_setg(errp
, "Image creation needs a size parameter");
5636 printf("Formatting '%s', fmt=%s ", filename
, fmt
);
5637 print_option_parameters(param
);
5640 ret
= bdrv_create(drv
, filename
, param
, &local_err
);
5641 if (ret
== -EFBIG
) {
5642 /* This is generally a better message than whatever the driver would
5643 * deliver (especially because of the cluster_size_hint), since that
5644 * is most probably not much different from "image too large". */
5645 const char *cluster_size_hint
= "";
5646 if (get_option_parameter(create_options
, BLOCK_OPT_CLUSTER_SIZE
)) {
5647 cluster_size_hint
= " (try using a larger cluster size)";
5649 error_setg(errp
, "The image size is too large for file format '%s'"
5650 "%s", fmt
, cluster_size_hint
);
5651 error_free(local_err
);
5656 free_option_parameters(create_options
);
5657 free_option_parameters(param
);
5660 error_propagate(errp
, local_err
);
5664 AioContext
*bdrv_get_aio_context(BlockDriverState
*bs
)
5666 return bs
->aio_context
;
5669 void bdrv_detach_aio_context(BlockDriverState
*bs
)
5675 if (bs
->io_limits_enabled
) {
5676 throttle_detach_aio_context(&bs
->throttle_state
);
5678 if (bs
->drv
->bdrv_detach_aio_context
) {
5679 bs
->drv
->bdrv_detach_aio_context(bs
);
5682 bdrv_detach_aio_context(bs
->file
);
5684 if (bs
->backing_hd
) {
5685 bdrv_detach_aio_context(bs
->backing_hd
);
5688 bs
->aio_context
= NULL
;
5691 void bdrv_attach_aio_context(BlockDriverState
*bs
,
5692 AioContext
*new_context
)
5698 bs
->aio_context
= new_context
;
5700 if (bs
->backing_hd
) {
5701 bdrv_attach_aio_context(bs
->backing_hd
, new_context
);
5704 bdrv_attach_aio_context(bs
->file
, new_context
);
5706 if (bs
->drv
->bdrv_attach_aio_context
) {
5707 bs
->drv
->bdrv_attach_aio_context(bs
, new_context
);
5709 if (bs
->io_limits_enabled
) {
5710 throttle_attach_aio_context(&bs
->throttle_state
, new_context
);
5714 void bdrv_set_aio_context(BlockDriverState
*bs
, AioContext
*new_context
)
5716 bdrv_drain_all(); /* ensure there are no in-flight requests */
5718 bdrv_detach_aio_context(bs
);
5720 /* This function executes in the old AioContext so acquire the new one in
5721 * case it runs in a different thread.
5723 aio_context_acquire(new_context
);
5724 bdrv_attach_aio_context(bs
, new_context
);
5725 aio_context_release(new_context
);
5728 void bdrv_add_before_write_notifier(BlockDriverState
*bs
,
5729 NotifierWithReturn
*notifier
)
5731 notifier_with_return_list_add(&bs
->before_write_notifiers
, notifier
);
5734 int bdrv_amend_options(BlockDriverState
*bs
, QEMUOptionParameter
*options
)
5736 if (bs
->drv
->bdrv_amend_options
== NULL
) {
5739 return bs
->drv
->bdrv_amend_options(bs
, options
);
5742 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5743 * of block filter and by bdrv_is_first_non_filter.
5744 * It is used to test if the given bs is the candidate or recurse more in the
5747 bool bdrv_recurse_is_first_non_filter(BlockDriverState
*bs
,
5748 BlockDriverState
*candidate
)
5750 /* return false if basic checks fails */
5751 if (!bs
|| !bs
->drv
) {
5755 /* the code reached a non block filter driver -> check if the bs is
5756 * the same as the candidate. It's the recursion termination condition.
5758 if (!bs
->drv
->is_filter
) {
5759 return bs
== candidate
;
5761 /* Down this path the driver is a block filter driver */
5763 /* If the block filter recursion method is defined use it to recurse down
5766 if (bs
->drv
->bdrv_recurse_is_first_non_filter
) {
5767 return bs
->drv
->bdrv_recurse_is_first_non_filter(bs
, candidate
);
5770 /* the driver is a block filter but don't allow to recurse -> return false
5775 /* This function checks if the candidate is the first non filter bs down it's
5776 * bs chain. Since we don't have pointers to parents it explore all bs chains
5777 * from the top. Some filters can choose not to pass down the recursion.
5779 bool bdrv_is_first_non_filter(BlockDriverState
*candidate
)
5781 BlockDriverState
*bs
;
5783 /* walk down the bs forest recursively */
5784 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
5787 /* try to recurse in this top level bs */
5788 perm
= bdrv_recurse_is_first_non_filter(bs
, candidate
);
5790 /* candidate is the first non filter */