tests/qemu-iotests/common.filter

   1 #!/usr/bin/env bash
   2 #
   3 # Copyright (C) 2009 Red Hat, Inc.
   4 # Copyright (c) 2000-2001 Silicon Graphics, Inc.  All Rights Reserved.
   5 #
   6 # This program is free software; you can redistribute it and/or
   7 # modify it under the terms of the GNU General Public License as
   8 # published by the Free Software Foundation.
   9 #
  10 # This program is distributed in the hope that it would be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  17 #
  18 #
  19 # standard filters
  20 #
  21
  22 _filter_date()
  23 {
  24     sed -Ee 's/[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}/yyyy-mm-dd hh:mm:ss/'
  25 }
  26
  27 _filter_vmstate_size()
  28 {
  29     sed -E -e 's/[0-9. ]{5} [KMGT]iB/     SIZE/' \
  30            -e 's/[0-9. ]{5} B/   SIZE/'
  31 }
  32
  33 _filter_generated_node_ids()
  34 {
  35     sed -Ee 's/\#block[0-9]{3,}/NODE_NAME/'
  36 }
  37
  38 _filter_qom_path()
  39 {
  40     gsed -e '/Attached to:/s/\device[[0-9]\+\]/device[N]/g'
  41 }
  42
  43 # replace occurrences of the actual TEST_DIR value with TEST_DIR
  44 _filter_testdir()
  45 {
  46     sed -e "s#$TEST_DIR/#TEST_DIR/#g" \
  47         -e "s#$SOCK_DIR/#SOCK_DIR/#g" \
  48         -e "s#SOCK_DIR/fuse-#TEST_DIR/#g"
  49 }
  50
  51 # replace occurrences of the actual IMGFMT value with IMGFMT
  52 _filter_imgfmt()
  53 {
  54     sed -e "s#$IMGFMT#IMGFMT#g"
  55 }
  56
  57 # Replace error message when the format is not supported and delete
  58 # the output lines after the first one
  59 _filter_qemu_img_check()
  60 {
  61     gsed -e '/allocated.*fragmented.*compressed clusters/d' \
  62         -e 's/qemu-img: This image format does not support checks/No errors were found on the image./' \
  63         -e '/Image end offset: [0-9]\+/d'
  64 }
  65
  66 # Removes \r from messages
  67 _filter_win32()
  68 {
  69     gsed -e 's/\r//g'
  70 }
  71
  72 # sanitize qemu-io output
  73 _filter_qemu_io()
  74 {
  75     _filter_win32 | \
  76     gsed -e "s/[0-9]* ops\; [0-9/:. sec]* ([0-9/.inf]* [EPTGMKiBbytes]*\/sec and [0-9/.inf]* ops\/sec)/X ops\; XX:XX:XX.X (XXX YYY\/sec and XXX ops\/sec)/" \
  77         -e "s/: line [0-9][0-9]*:  *[0-9][0-9]*\( Aborted\| Killed\)/:\1/" \
  78         -e "s/qemu-io> //g"
  79 }
  80
  81 # replace occurrences of QEMU_PROG with "qemu"
  82 _filter_qemu()
  83 {
  84     gsed -e "s#\\(^\\|(qemu) \\)$(basename $QEMU_PROG):#\1QEMU_PROG:#" \
  85         -e 's#^QEMU [0-9]\+\.[0-9]\+\.[0-9]\+ monitor#QEMU X.Y.Z monitor#' \
  86         -e $'s#\r##' # QEMU monitor uses \r\n line endings
  87 }
  88
  89 # replace problematic QMP output like timestamps
  90 _filter_qmp()
  91 {
  92     _filter_win32 | \
  93     gsed -e 's#\("\(micro\)\?seconds": \)[0-9]\+#\1 TIMESTAMP#g' \
  94         -e 's#^{"QMP":.*}$#QMP_VERSION#' \
  95         -e '/^    "QMP": {\s*$/, /^    }\s*$/ c\' \
  96         -e '    QMP_VERSION'
  97 }
  98
  99 # readline makes HMP command strings so long that git complains
 100 _filter_hmp()
 101 {
 102     gsed -e $'s/^\\((qemu) \\)\\?.*\e\\[D/\\1/g' \
 103         -e $'s/\e\\[K//g'
 104 }
 105
 106 # replace block job offset
 107 _filter_block_job_offset()
 108 {
 109     sed -e 's/, "offset": [0-9]\+,/, "offset": OFFSET,/'
 110 }
 111
 112 # replace block job len
 113 _filter_block_job_len()
 114 {
 115     sed -e 's/, "len": [0-9]\+,/, "len": LEN,/g'
 116 }
 117
 118 # replace actual image size (depends on the host filesystem)
 119 _filter_actual_image_size()
 120 {
 121     gsed -s 's/\("actual-size":\s*\)[0-9]\+/\1SIZE/g'
 122 }
 123
 124 # Filename filters for qemu-img create
 125 _filter_img_create_filenames()
 126 {
 127     sed \
 128         -e "s#$REMOTE_TEST_DIR#TEST_DIR#g" \
 129         -e "s#$IMGPROTO:$TEST_DIR#TEST_DIR#g" \
 130         -e "s#$TEST_DIR#TEST_DIR#g" \
 131         -e "s#$SOCK_DIR#SOCK_DIR#g" \
 132         -e 's#SOCK_DIR/fuse-#TEST_DIR/#g' \
 133         -e "s#$IMGFMT#IMGFMT#g" \
 134         -e 's#nbd:127.0.0.1:[0-9]\\+#TEST_DIR/t.IMGFMT#g' \
 135         -e 's#nbd+unix:///\??socket=SOCK_DIR/nbd#TEST_DIR/t.IMGFMT#g'
 136 }
 137
 138 # replace driver-specific options in the "Formatting..." line
 139 _do_filter_img_create()
 140 {
 141     # Split the line into the pre-options part ($filename_part, which
 142     # precedes ", fmt=") and the options part ($options, which starts
 143     # with "fmt=")
 144     # (And just echo everything before the first "^Formatting")
 145     readarray formatting_line < <(gsed -e 's/, fmt=/\n/')
 146
 147     filename_part=${formatting_line[0]}
 148     unset formatting_line[0]
 149
 150     options="fmt=${formatting_line[@]}"
 151
 152     # Set grep_data_file to '\|data_file' to keep it; make it empty
 153     # to drop it.
 154     # We want to drop it if it is part of the global $IMGOPTS, and we
 155     # want to keep it otherwise (if the test specifically wants to
 156     # test data files).
 157     grep_data_file=(-e data_file)
 158     if _get_data_file "$TEST_IMG" > /dev/null; then
 159         grep_data_file=()
 160     fi
 161
 162     filename_part=$(echo "$filename_part" | _filter_img_create_filenames)
 163
 164     # Break the option line before each option (preserving pre-existing
 165     # line breaks by replacing them by \0 and restoring them at the end),
 166     # then filter out the options we want to keep and sort them according
 167     # to some order that all block drivers used at the time of writing
 168     # this function.
 169     options=$(
 170         echo "$options" \
 171         | tr '\n' '\0' \
 172         | gsed -e 's/ \([a-z0-9_.-]*\)=/\n\1=/g' \
 173         | grep -a -e '^fmt' -e '^size' -e '^backing' -e '^preallocation' \
 174                   -e '^encryption' "${grep_data_file[@]}" \
 175         | _filter_img_create_filenames \
 176         | sed \
 177             -e 's/^\(fmt\)/0-\1/' \
 178             -e 's/^\(size\)/1-\1/' \
 179             -e 's/^\(backing\)/2-\1/' \
 180             -e 's/^\(data_file\)/3-\1/' \
 181             -e 's/^\(encryption\)/4-\1/' \
 182             -e 's/^\(preallocation\)/8-\1/' \
 183         | LC_ALL=C sort \
 184         | sed -e 's/^[0-9]-//' \
 185         | tr '\n\0' ' \n' \
 186         | sed -e 's/^ *$//' -e 's/ *$//'
 187     )
 188
 189     if [ -n "$options" ]; then
 190         echo "$filename_part, $options"
 191     elif [ -n "$filename_part" ]; then
 192         echo "$filename_part"
 193     fi
 194 }
 195
 196 # Filter qemu-img create output:
 197 # Pipe all ^Formatting lines through _do_filter_img_create, and all
 198 # other lines through _filter_img_create_filenames
 199 _filter_img_create()
 200 {
 201     while read -r line; do
 202         if echo "$line" | grep -q '^Formatting'; then
 203             echo "$line" | _do_filter_img_create
 204         else
 205             echo "$line" | _filter_img_create_filenames
 206         fi
 207     done
 208 }
 209
 210 _filter_img_create_size()
 211 {
 212     gsed -e "s# size=[0-9]\\+# size=SIZE#g"
 213 }
 214
 215 _filter_img_info()
 216 {
 217     if [[ "$1" == "--format-specific" ]]; then
 218         local format_specific=1
 219         shift
 220     else
 221         local format_specific=0
 222     fi
 223
 224     discard=0
 225     regex_json_spec_start='^ *"format-specific": \{'
 226     gsed -e "s#$REMOTE_TEST_DIR#TEST_DIR#g" \
 227         -e "s#$IMGPROTO:$TEST_DIR#TEST_DIR#g" \
 228         -e "s#$TEST_DIR#TEST_DIR#g" \
 229         -e "s#$SOCK_DIR#SOCK_DIR#g" \
 230         -e "s#$IMGFMT#IMGFMT#g" \
 231         -e 's#nbd://127.0.0.1:[0-9]\\+$#TEST_DIR/t.IMGFMT#g' \
 232         -e 's#nbd+unix:///\??socket=SOCK_DIR/nbd#TEST_DIR/t.IMGFMT#g' \
 233         -e 's#SOCK_DIR/fuse-#TEST_DIR/#g' \
 234         -e "/encrypted: yes/d" \
 235         -e "/cluster_size: [0-9]\\+/d" \
 236         -e "/table_size: [0-9]\\+/d" \
 237         -e "/compat: '[^']*'/d" \
 238         -e "/compat6: \\(on\\|off\\)/d" \
 239         -e "s/cid: [0-9]\+/cid: XXXXXXXXXX/" \
 240         -e "/static: \\(on\\|off\\)/d" \
 241         -e "/zeroed_grain: \\(on\\|off\\)/d" \
 242         -e "/subformat: '[^']*'/d" \
 243         -e "/adapter_type: '[^']*'/d" \
 244         -e "/hwversion: '[^']*'/d" \
 245         -e "/lazy_refcounts: \\(on\\|off\\)/d" \
 246         -e "/extended_l2=\\(on\\|off\\)/d" \
 247         -e "/block_size: [0-9]\\+/d" \
 248         -e "/block_state_zero: \\(on\\|off\\)/d" \
 249         -e "/log_size: [0-9]\\+/d" \
 250         -e "s/iters: [0-9]\\+/iters: 1024/" \
 251         -e 's/\(compression type: \)\(zlib\|zstd\)/\1COMPRESSION_TYPE/' \
 252         -e "s/uuid: [-a-f0-9]\\+/uuid: 00000000-0000-0000-0000-000000000000/" | \
 253     while IFS='' read -r line; do
 254         if [[ $format_specific == 1 ]]; then
 255             discard=0
 256         elif [[ $line == "Format specific information:" ]]; then
 257             discard=1
 258         elif [[ $line =~ $regex_json_spec_start ]]; then
 259             discard=2
 260             regex_json_spec_end="^${line%%[^ ]*}\\},? *$"
 261         fi
 262         if [[ $discard == 0 ]]; then
 263             echo "$line"
 264         elif [[ $discard == 1 && ! $line ]]; then
 265             echo
 266             discard=0
 267         elif [[ $discard == 2 && $line =~ $regex_json_spec_end ]]; then
 268             discard=0
 269         fi
 270     done
 271 }
 272
 273 # filter out offsets and file names from qemu-img map; good for both
 274 # human and json output
 275 _filter_qemu_img_map()
 276 {
 277     # Assuming the data_file value in $IMGOPTS contains a '$TEST_IMG',
 278     # create a filter that replaces the data file name by $TEST_IMG.
 279     # Example:
 280     #   In $IMGOPTS: 'data_file=$TEST_IMG.data_file'
 281     #   Then data_file_pattern == '\(.*\).data_file'
 282     #   And  data_file_filter  == -e 's#\(.*\).data_file#\1#
 283     data_file_filter=()
 284     if data_file_pattern=$(_get_data_file '\\(.*\\)'); then
 285         data_file_filter=(-e "s#$data_file_pattern#\\1#")
 286     fi
 287
 288     sed -e 's/\([0-9a-fx]* *[0-9a-fx]* *\)[0-9a-fx]* */\1/g' \
 289         -e 's/"offset": [0-9]\+/"offset": OFFSET/g' \
 290         -e 's/Mapped to *//' \
 291         "${data_file_filter[@]}" \
 292         | _filter_testdir | _filter_imgfmt
 293 }
 294
 295 _filter_nbd()
 296 {
 297     # nbd.c error messages contain function names and line numbers that are
 298     # prone to change.  Message ordering depends on timing between send and
 299     # receive callbacks sometimes, making them unreliable.
 300     #
 301     # Filter out the TCP port number since this changes between runs.
 302     sed -e '/nbd\/.*\.c:/d' \
 303         -e 's#127\.0\.0\.1:[0-9]*#127.0.0.1:PORT#g' \
 304         -e 's#localhost:[0-9]*#localhost:PORT#g' \
 305         -e 's#host=127\.0\.0\.1,port=[0-9]*#host=127.0.0.1,port=PORT#g' \
 306         -e 's#host=localhost,port=[0-9]*#host=localhost,port=PORT#g' \
 307         -e "s#path=$SOCK_DIR#path=SOCK_DIR#g" \
 308         -e "s#?socket=$SOCK_DIR#?socket=SOCK_DIR#g" \
 309         -e 's#\(foo\|PORT/\?\|.sock\): Failed to .*$#\1#'
 310 }
 311
 312 _filter_qemu_nbd_exports()
 313 {
 314     grep '\(exports available\|export\|size\|min block\|qemu-nbd\):'
 315 }
 316
 317 _filter_qmp_empty_return()
 318 {
 319     grep -v '{"return": {}}'
 320 }
 321
 322 _filter_json_filename()
 323 {
 324     $PYTHON -c 'import sys
 325 result, *fnames = sys.stdin.read().split("json:{")
 326 depth = 0
 327 for fname in fnames:
 328     depth += 1 # For the opening brace in the split separator
 329     for chr_i, chr in enumerate(fname):
 330         if chr == "{":
 331             depth += 1
 332         elif chr == "}":
 333             depth -= 1
 334             if depth == 0:
 335                 break
 336
 337     # json:{} filenames may be nested; filter out everything from
 338     # inside the outermost one
 339     if depth == 0:
 340         chr_i += 1 # First character past the filename
 341         result += "json:{ /* filtered */ }" + fname[chr_i:]
 342
 343 sys.stdout.write(result)'
 344 }
 345
 346 _filter_authz_check_tls()
 347 {
 348     sed -e 's/TLS x509 authz check for .* is denied/TLS x509 authz check for DISTINGUISHED-NAME is denied/'
 349 }
 350
 351 _filter_qcow2_compression_type_bit()
 352 {
 353     gsed -e 's/\(incompatible_features\s\+\)\[3\(, \)\?/\1[/' \
 354         -e 's/\(incompatible_features.*\), 3\]/\1]/' \
 355         -e 's/\(incompatible_features.*\), 3\(,.*\)/\1\2/'
 356 }
 357
 358 # make sure this script returns success
 359 true