| blob | 1124a2dda8372c72bdb453e34663a22e9f5c9d40 |
1 # -*- Mode: Python -*-
2 # vim: filetype=python
3 #
5 ##
6 # = Migration
7 ##
9 { 'include': 'common.json' }
10 { 'include': 'sockets.json' }
12 ##
13 # @MigrationStats:
14 #
15 # Detailed migration status.
16 #
17 # @transferred: amount of bytes already transferred to the target VM
18 #
19 # @remaining: amount of bytes remaining to be transferred to the target VM
20 #
21 # @total: total amount of bytes involved in the migration process
22 #
23 # @duplicate: number of duplicate (zero) pages (since 1.2)
24 #
25 # @skipped: number of skipped zero pages (since 1.5)
26 #
27 # @normal: number of normal pages (since 1.2)
28 #
29 # @normal-bytes: number of normal bytes sent (since 1.2)
30 #
31 # @dirty-pages-rate: number of pages dirtied by second by the
32 # guest (since 1.3)
33 #
34 # @mbps: throughput in megabits/sec. (since 1.6)
35 #
36 # @dirty-sync-count: number of times that dirty ram was synchronized (since 2.1)
37 #
38 # @postcopy-requests: The number of page requests received from the destination
39 # (since 2.7)
40 #
41 # @page-size: The number of bytes per page for the various page-based
42 # statistics (since 2.10)
43 #
44 # @multifd-bytes: The number of bytes sent through multifd (since 3.0)
45 #
46 # @pages-per-second: the number of memory pages transferred per second
47 # (Since 4.0)
48 #
49 # Since: 0.14
50 ##
51 { 'struct': 'MigrationStats',
52 'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' ,
53 'duplicate': 'int', 'skipped': 'int', 'normal': 'int',
54 'normal-bytes': 'int', 'dirty-pages-rate' : 'int',
55 'mbps' : 'number', 'dirty-sync-count' : 'int',
56 'postcopy-requests' : 'int', 'page-size' : 'int',
57 'multifd-bytes' : 'uint64', 'pages-per-second' : 'uint64' } }
59 ##
60 # @XBZRLECacheStats:
61 #
62 # Detailed XBZRLE migration cache statistics
63 #
64 # @cache-size: XBZRLE cache size
65 #
66 # @bytes: amount of bytes already transferred to the target VM
67 #
68 # @pages: amount of pages transferred to the target VM
69 #
70 # @cache-miss: number of cache miss
71 #
72 # @cache-miss-rate: rate of cache miss (since 2.1)
73 #
74 # @encoding-rate: rate of encoded bytes (since 5.1)
75 #
76 # @overflow: number of overflows
77 #
78 # Since: 1.2
79 ##
80 { 'struct': 'XBZRLECacheStats',
81 'data': {'cache-size': 'size', 'bytes': 'int', 'pages': 'int',
82 'cache-miss': 'int', 'cache-miss-rate': 'number',
83 'encoding-rate': 'number', 'overflow': 'int' } }
85 ##
86 # @CompressionStats:
87 #
88 # Detailed migration compression statistics
89 #
90 # @pages: amount of pages compressed and transferred to the target VM
91 #
92 # @busy: count of times that no free thread was available to compress data
93 #
94 # @busy-rate: rate of thread busy
95 #
96 # @compressed-size: amount of bytes after compression
97 #
98 # @compression-rate: rate of compressed size
99 #
100 # Since: 3.1
101 ##
102 { 'struct': 'CompressionStats',
103 'data': {'pages': 'int', 'busy': 'int', 'busy-rate': 'number',
104 'compressed-size': 'int', 'compression-rate': 'number' } }
106 ##
107 # @MigrationStatus:
108 #
109 # An enumeration of migration status.
110 #
111 # @none: no migration has ever happened.
112 #
113 # @setup: migration process has been initiated.
114 #
115 # @cancelling: in the process of cancelling migration.
116 #
117 # @cancelled: cancelling migration is finished.
118 #
119 # @active: in the process of doing migration.
120 #
121 # @postcopy-active: like active, but now in postcopy mode. (since 2.5)
122 #
123 # @postcopy-paused: during postcopy but paused. (since 3.0)
124 #
125 # @postcopy-recover: trying to recover from a paused postcopy. (since 3.0)
126 #
127 # @completed: migration is finished.
128 #
129 # @failed: some error occurred during migration process.
130 #
131 # @colo: VM is in the process of fault tolerance, VM can not get into this
132 # state unless colo capability is enabled for migration. (since 2.8)
133 #
134 # @pre-switchover: Paused before device serialisation. (since 2.11)
135 #
136 # @device: During device serialisation when pause-before-switchover is enabled
137 # (since 2.11)
138 #
139 # @wait-unplug: wait for device unplug request by guest OS to be completed.
140 # (since 4.2)
141 #
142 # Since: 2.3
143 #
144 ##
145 { 'enum': 'MigrationStatus',
146 'data': [ 'none', 'setup', 'cancelling', 'cancelled',
147 'active', 'postcopy-active', 'postcopy-paused',
148 'postcopy-recover', 'completed', 'failed', 'colo',
149 'pre-switchover', 'device', 'wait-unplug' ] }
150 ##
151 # @VfioStats:
152 #
153 # Detailed VFIO devices migration statistics
154 #
155 # @transferred: amount of bytes transferred to the target VM by VFIO devices
156 #
157 # Since: 5.2
158 #
159 ##
160 { 'struct': 'VfioStats',
161 'data': {'transferred': 'int' } }
163 ##
164 # @MigrationInfo:
165 #
166 # Information about current migration process.
167 #
168 # @status: @MigrationStatus describing the current migration status.
169 # If this field is not returned, no migration process
170 # has been initiated
171 #
172 # @ram: @MigrationStats containing detailed migration
173 # status, only returned if status is 'active' or
174 # 'completed'(since 1.2)
175 #
176 # @disk: @MigrationStats containing detailed disk migration
177 # status, only returned if status is 'active' and it is a block
178 # migration
179 #
180 # @xbzrle-cache: @XBZRLECacheStats containing detailed XBZRLE
181 # migration statistics, only returned if XBZRLE feature is on and
182 # status is 'active' or 'completed' (since 1.2)
183 #
184 # @total-time: total amount of milliseconds since migration started.
185 # If migration has ended, it returns the total migration
186 # time. (since 1.2)
187 #
188 # @downtime: only present when migration finishes correctly
189 # total downtime in milliseconds for the guest.
190 # (since 1.3)
191 #
192 # @expected-downtime: only present while migration is active
193 # expected downtime in milliseconds for the guest in last walk
194 # of the dirty bitmap. (since 1.3)
195 #
196 # @setup-time: amount of setup time in milliseconds *before* the
197 # iterations begin but *after* the QMP command is issued. This is designed
198 # to provide an accounting of any activities (such as RDMA pinning) which
199 # may be expensive, but do not actually occur during the iterative
200 # migration rounds themselves. (since 1.6)
201 #
202 # @cpu-throttle-percentage: percentage of time guest cpus are being
203 # throttled during auto-converge. This is only present when auto-converge
204 # has started throttling guest cpus. (Since 2.7)
205 #
206 # @error-desc: the human readable error description string, when
207 # @status is 'failed'. Clients should not attempt to parse the
208 # error strings. (Since 2.7)
209 #
210 # @postcopy-blocktime: total time when all vCPU were blocked during postcopy
211 # live migration. This is only present when the postcopy-blocktime
212 # migration capability is enabled. (Since 3.0)
213 #
214 # @postcopy-vcpu-blocktime: list of the postcopy blocktime per vCPU. This is
215 # only present when the postcopy-blocktime migration capability
216 # is enabled. (Since 3.0)
217 #
218 # @compression: migration compression statistics, only returned if compression
219 # feature is on and status is 'active' or 'completed' (Since 3.1)
220 #
221 # @socket-address: Only used for tcp, to know what the real port is (Since 4.0)
222 #
223 # @vfio: @VfioStats containing detailed VFIO devices migration statistics,
224 # only returned if VFIO device is present, migration is supported by all
225 # VFIO devices and status is 'active' or 'completed' (since 5.2)
226 #
227 # @blocked-reasons: A list of reasons an outgoing migration is blocked.
228 # Present and non-empty when migration is blocked.
229 # (since 6.0)
230 #
231 # Since: 0.14
232 ##
233 { 'struct': 'MigrationInfo',
234 'data': {'*status': 'MigrationStatus', '*ram': 'MigrationStats',
235 '*disk': 'MigrationStats',
236 '*vfio': 'VfioStats',
237 '*xbzrle-cache': 'XBZRLECacheStats',
238 '*total-time': 'int',
239 '*expected-downtime': 'int',
240 '*downtime': 'int',
241 '*setup-time': 'int',
242 '*cpu-throttle-percentage': 'int',
243 '*error-desc': 'str',
244 '*blocked-reasons': ['str'],
245 '*postcopy-blocktime' : 'uint32',
246 '*postcopy-vcpu-blocktime': ['uint32'],
247 '*compression': 'CompressionStats',
248 '*socket-address': ['SocketAddress'] } }
250 ##
251 # @query-migrate:
252 #
253 # Returns information about current migration process. If migration
254 # is active there will be another json-object with RAM migration
255 # status and if block migration is active another one with block
256 # migration status.
257 #
258 # Returns: @MigrationInfo
259 #
260 # Since: 0.14
261 #
262 # Example:
263 #
264 # 1. Before the first migration
265 #
266 # -> { "execute": "query-migrate" }
267 # <- { "return": {} }
268 #
269 # 2. Migration is done and has succeeded
270 #
271 # -> { "execute": "query-migrate" }
272 # <- { "return": {
273 # "status": "completed",
274 # "total-time":12345,
275 # "setup-time":12345,
276 # "downtime":12345,
277 # "ram":{
278 # "transferred":123,
279 # "remaining":123,
280 # "total":246,
281 # "duplicate":123,
282 # "normal":123,
283 # "normal-bytes":123456,
284 # "dirty-sync-count":15
285 # }
286 # }
287 # }
288 #
289 # 3. Migration is done and has failed
290 #
291 # -> { "execute": "query-migrate" }
292 # <- { "return": { "status": "failed" } }
293 #
294 # 4. Migration is being performed and is not a block migration:
295 #
296 # -> { "execute": "query-migrate" }
297 # <- {
298 # "return":{
299 # "status":"active",
300 # "total-time":12345,
301 # "setup-time":12345,
302 # "expected-downtime":12345,
303 # "ram":{
304 # "transferred":123,
305 # "remaining":123,
306 # "total":246,
307 # "duplicate":123,
308 # "normal":123,
309 # "normal-bytes":123456,
310 # "dirty-sync-count":15
311 # }
312 # }
313 # }
314 #
315 # 5. Migration is being performed and is a block migration:
316 #
317 # -> { "execute": "query-migrate" }
318 # <- {
319 # "return":{
320 # "status":"active",
321 # "total-time":12345,
322 # "setup-time":12345,
323 # "expected-downtime":12345,
324 # "ram":{
325 # "total":1057024,
326 # "remaining":1053304,
327 # "transferred":3720,
328 # "duplicate":123,
329 # "normal":123,
330 # "normal-bytes":123456,
331 # "dirty-sync-count":15
332 # },
333 # "disk":{
334 # "total":20971520,
335 # "remaining":20880384,
336 # "transferred":91136
337 # }
338 # }
339 # }
340 #
341 # 6. Migration is being performed and XBZRLE is active:
342 #
343 # -> { "execute": "query-migrate" }
344 # <- {
345 # "return":{
346 # "status":"active",
347 # "total-time":12345,
348 # "setup-time":12345,
349 # "expected-downtime":12345,
350 # "ram":{
351 # "total":1057024,
352 # "remaining":1053304,
353 # "transferred":3720,
354 # "duplicate":10,
355 # "normal":3333,
356 # "normal-bytes":3412992,
357 # "dirty-sync-count":15
358 # },
359 # "xbzrle-cache":{
360 # "cache-size":67108864,
361 # "bytes":20971520,
362 # "pages":2444343,
363 # "cache-miss":2244,
364 # "cache-miss-rate":0.123,
365 # "encoding-rate":80.1,
366 # "overflow":34434
367 # }
368 # }
369 # }
370 #
371 ##
372 { 'command': 'query-migrate', 'returns': 'MigrationInfo' }
374 ##
375 # @MigrationCapability:
376 #
377 # Migration capabilities enumeration
378 #
379 # @xbzrle: Migration supports xbzrle (Xor Based Zero Run Length Encoding).
380 # This feature allows us to minimize migration traffic for certain work
381 # loads, by sending compressed difference of the pages
382 #
383 # @rdma-pin-all: Controls whether or not the entire VM memory footprint is
384 # mlock()'d on demand or all at once. Refer to docs/rdma.txt for usage.
385 # Disabled by default. (since 2.0)
386 #
387 # @zero-blocks: During storage migration encode blocks of zeroes efficiently. This
388 # essentially saves 1MB of zeroes per block on the wire. Enabling requires
389 # source and target VM to support this feature. To enable it is sufficient
390 # to enable the capability on the source VM. The feature is disabled by
391 # default. (since 1.6)
392 #
393 # @compress: Use multiple compression threads to accelerate live migration.
394 # This feature can help to reduce the migration traffic, by sending
395 # compressed pages. Please note that if compress and xbzrle are both
396 # on, compress only takes effect in the ram bulk stage, after that,
397 # it will be disabled and only xbzrle takes effect, this can help to
398 # minimize migration traffic. The feature is disabled by default.
399 # (since 2.4 )
400 #
401 # @events: generate events for each migration state change
402 # (since 2.4 )
403 #
404 # @auto-converge: If enabled, QEMU will automatically throttle down the guest
405 # to speed up convergence of RAM migration. (since 1.6)
406 #
407 # @postcopy-ram: Start executing on the migration target before all of RAM has
408 # been migrated, pulling the remaining pages along as needed. The
409 # capacity must have the same setting on both source and target
410 # or migration will not even start. NOTE: If the migration fails during
411 # postcopy the VM will fail. (since 2.6)
412 #
413 # @x-colo: If enabled, migration will never end, and the state of the VM on the
414 # primary side will be migrated continuously to the VM on secondary
415 # side, this process is called COarse-Grain LOck Stepping (COLO) for
416 # Non-stop Service. (since 2.8)
417 #
418 # @release-ram: if enabled, qemu will free the migrated ram pages on the source
419 # during postcopy-ram migration. (since 2.9)
420 #
421 # @block: If enabled, QEMU will also migrate the contents of all block
422 # devices. Default is disabled. A possible alternative uses
423 # mirror jobs to a builtin NBD server on the destination, which
424 # offers more flexibility.
425 # (Since 2.10)
426 #
427 # @return-path: If enabled, migration will use the return path even
428 # for precopy. (since 2.10)
429 #
430 # @pause-before-switchover: Pause outgoing migration before serialising device
431 # state and before disabling block IO (since 2.11)
432 #
433 # @multifd: Use more than one fd for migration (since 4.0)
434 #
435 # @dirty-bitmaps: If enabled, QEMU will migrate named dirty bitmaps.
436 # (since 2.12)
437 #
438 # @postcopy-blocktime: Calculate downtime for postcopy live migration
439 # (since 3.0)
440 #
441 # @late-block-activate: If enabled, the destination will not activate block
442 # devices (and thus take locks) immediately at the end of migration.
443 # (since 3.0)
444 #
445 # @x-ignore-shared: If enabled, QEMU will not migrate shared memory (since 4.0)
446 #
447 # @validate-uuid: Send the UUID of the source to allow the destination
448 # to ensure it is the same. (since 4.2)
449 #
450 # @background-snapshot: If enabled, the migration stream will be a snapshot
451 # of the VM exactly at the point when the migration
452 # procedure starts. The VM RAM is saved with running VM.
453 # (since 6.0)
454 #
455 # Since: 1.2
456 ##
457 { 'enum': 'MigrationCapability',
458 'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks',
459 'compress', 'events', 'postcopy-ram', 'x-colo', 'release-ram',
460 'block', 'return-path', 'pause-before-switchover', 'multifd',
461 'dirty-bitmaps', 'postcopy-blocktime', 'late-block-activate',
462 'x-ignore-shared', 'validate-uuid', 'background-snapshot'] }
464 ##
465 # @MigrationCapabilityStatus:
466 #
467 # Migration capability information
468 #
469 # @capability: capability enum
470 #
471 # @state: capability state bool
472 #
473 # Since: 1.2
474 ##
475 { 'struct': 'MigrationCapabilityStatus',
476 'data': { 'capability' : 'MigrationCapability', 'state' : 'bool' } }
478 ##
479 # @migrate-set-capabilities:
480 #
481 # Enable/Disable the following migration capabilities (like xbzrle)
482 #
483 # @capabilities: json array of capability modifications to make
484 #
485 # Since: 1.2
486 #
487 # Example:
488 #
489 # -> { "execute": "migrate-set-capabilities" , "arguments":
490 # { "capabilities": [ { "capability": "xbzrle", "state": true } ] } }
491 #
492 ##
493 { 'command': 'migrate-set-capabilities',
494 'data': { 'capabilities': ['MigrationCapabilityStatus'] } }
496 ##
497 # @query-migrate-capabilities:
498 #
499 # Returns information about the current migration capabilities status
500 #
501 # Returns: @MigrationCapabilitiesStatus
502 #
503 # Since: 1.2
504 #
505 # Example:
506 #
507 # -> { "execute": "query-migrate-capabilities" }
508 # <- { "return": [
509 # {"state": false, "capability": "xbzrle"},
510 # {"state": false, "capability": "rdma-pin-all"},
511 # {"state": false, "capability": "auto-converge"},
512 # {"state": false, "capability": "zero-blocks"},
513 # {"state": false, "capability": "compress"},
514 # {"state": true, "capability": "events"},
515 # {"state": false, "capability": "postcopy-ram"},
516 # {"state": false, "capability": "x-colo"}
517 # ]}
518 #
519 ##
520 { 'command': 'query-migrate-capabilities', 'returns': ['MigrationCapabilityStatus']}
522 ##
523 # @MultiFDCompression:
524 #
525 # An enumeration of multifd compression methods.
526 #
527 # @none: no compression.
528 # @zlib: use zlib compression method.
529 # @zstd: use zstd compression method.
530 #
531 # Since: 5.0
532 #
533 ##
534 { 'enum': 'MultiFDCompression',
535 'data': [ 'none', 'zlib',
536 { 'name': 'zstd', 'if': 'defined(CONFIG_ZSTD)' } ] }
538 ##
539 # @BitmapMigrationBitmapAliasTransform:
540 #
541 # @persistent: If present, the bitmap will be made persistent
542 # or transient depending on this parameter.
543 #
544 # Since: 6.0
545 ##
546 { 'struct': 'BitmapMigrationBitmapAliasTransform',
547 'data': {
548 '*persistent': 'bool'
549 } }
551 ##
552 # @BitmapMigrationBitmapAlias:
553 #
554 # @name: The name of the bitmap.
555 #
556 # @alias: An alias name for migration (for example the bitmap name on
557 # the opposite site).
558 #
559 # @transform: Allows the modification of the migrated bitmap.
560 # (since 6.0)
561 #
562 # Since: 5.2
563 ##
564 { 'struct': 'BitmapMigrationBitmapAlias',
565 'data': {
566 'name': 'str',
567 'alias': 'str',
568 '*transform': 'BitmapMigrationBitmapAliasTransform'
569 } }
571 ##
572 # @BitmapMigrationNodeAlias:
573 #
574 # Maps a block node name and the bitmaps it has to aliases for dirty
575 # bitmap migration.
576 #
577 # @node-name: A block node name.
578 #
579 # @alias: An alias block node name for migration (for example the
580 # node name on the opposite site).
581 #
582 # @bitmaps: Mappings for the bitmaps on this node.
583 #
584 # Since: 5.2
585 ##
586 { 'struct': 'BitmapMigrationNodeAlias',
587 'data': {
588 'node-name': 'str',
589 'alias': 'str',
590 'bitmaps': [ 'BitmapMigrationBitmapAlias' ]
591 } }
593 ##
594 # @MigrationParameter:
595 #
596 # Migration parameters enumeration
597 #
598 # @announce-initial: Initial delay (in milliseconds) before sending the first
599 # announce (Since 4.0)
600 #
601 # @announce-max: Maximum delay (in milliseconds) between packets in the
602 # announcement (Since 4.0)
603 #
604 # @announce-rounds: Number of self-announce packets sent after migration
605 # (Since 4.0)
606 #
607 # @announce-step: Increase in delay (in milliseconds) between subsequent
608 # packets in the announcement (Since 4.0)
609 #
610 # @compress-level: Set the compression level to be used in live migration,
611 # the compression level is an integer between 0 and 9, where 0 means
612 # no compression, 1 means the best compression speed, and 9 means best
613 # compression ratio which will consume more CPU.
614 #
615 # @compress-threads: Set compression thread count to be used in live migration,
616 # the compression thread count is an integer between 1 and 255.
617 #
618 # @compress-wait-thread: Controls behavior when all compression threads are
619 # currently busy. If true (default), wait for a free
620 # compression thread to become available; otherwise,
621 # send the page uncompressed. (Since 3.1)
622 #
623 # @decompress-threads: Set decompression thread count to be used in live
624 # migration, the decompression thread count is an integer between 1
625 # and 255. Usually, decompression is at least 4 times as fast as
626 # compression, so set the decompress-threads to the number about 1/4
627 # of compress-threads is adequate.
628 #
629 # @throttle-trigger-threshold: The ratio of bytes_dirty_period and bytes_xfer_period
630 # to trigger throttling. It is expressed as percentage.
631 # The default value is 50. (Since 5.0)
632 #
633 # @cpu-throttle-initial: Initial percentage of time guest cpus are throttled
634 # when migration auto-converge is activated. The
635 # default value is 20. (Since 2.7)
636 #
637 # @cpu-throttle-increment: throttle percentage increase each time
638 # auto-converge detects that migration is not making
639 # progress. The default value is 10. (Since 2.7)
640 #
641 # @cpu-throttle-tailslow: Make CPU throttling slower at tail stage
642 # At the tail stage of throttling, the Guest is very
643 # sensitive to CPU percentage while the @cpu-throttle
644 # -increment is excessive usually at tail stage.
645 # If this parameter is true, we will compute the ideal
646 # CPU percentage used by the Guest, which may exactly make
647 # the dirty rate match the dirty rate threshold. Then we
648 # will choose a smaller throttle increment between the
649 # one specified by @cpu-throttle-increment and the one
650 # generated by ideal CPU percentage.
651 # Therefore, it is compatible to traditional throttling,
652 # meanwhile the throttle increment won't be excessive
653 # at tail stage.
654 # The default value is false. (Since 5.1)
655 #
656 # @tls-creds: ID of the 'tls-creds' object that provides credentials for
657 # establishing a TLS connection over the migration data channel.
658 # On the outgoing side of the migration, the credentials must
659 # be for a 'client' endpoint, while for the incoming side the
660 # credentials must be for a 'server' endpoint. Setting this
661 # will enable TLS for all migrations. The default is unset,
662 # resulting in unsecured migration at the QEMU level. (Since 2.7)
663 #
664 # @tls-hostname: hostname of the target host for the migration. This is
665 # required when using x509 based TLS credentials and the
666 # migration URI does not already include a hostname. For
667 # example if using fd: or exec: based migration, the
668 # hostname must be provided so that the server's x509
669 # certificate identity can be validated. (Since 2.7)
670 #
671 # @tls-authz: ID of the 'authz' object subclass that provides access control
672 # checking of the TLS x509 certificate distinguished name.
673 # This object is only resolved at time of use, so can be deleted
674 # and recreated on the fly while the migration server is active.
675 # If missing, it will default to denying access (Since 4.0)
676 #
677 # @max-bandwidth: to set maximum speed for migration. maximum speed in
678 # bytes per second. (Since 2.8)
679 #
680 # @downtime-limit: set maximum tolerated downtime for migration. maximum
681 # downtime in milliseconds (Since 2.8)
682 #
683 # @x-checkpoint-delay: The delay time (in ms) between two COLO checkpoints in
684 # periodic mode. (Since 2.8)
685 #
686 # @block-incremental: Affects how much storage is migrated when the
687 # block migration capability is enabled. When false, the entire
688 # storage backing chain is migrated into a flattened image at
689 # the destination; when true, only the active qcow2 layer is
690 # migrated and the destination must already have access to the
691 # same backing chain as was used on the source. (since 2.10)
692 #
693 # @multifd-channels: Number of channels used to migrate data in
694 # parallel. This is the same number that the
695 # number of sockets used for migration. The
696 # default value is 2 (since 4.0)
697 #
698 # @xbzrle-cache-size: cache size to be used by XBZRLE migration. It
699 # needs to be a multiple of the target page size
700 # and a power of 2
701 # (Since 2.11)
702 #
703 # @max-postcopy-bandwidth: Background transfer bandwidth during postcopy.
704 # Defaults to 0 (unlimited). In bytes per second.
705 # (Since 3.0)
706 #
707 # @max-cpu-throttle: maximum cpu throttle percentage.
708 # Defaults to 99. (Since 3.1)
709 #
710 # @multifd-compression: Which compression method to use.
711 # Defaults to none. (Since 5.0)
712 #
713 # @multifd-zlib-level: Set the compression level to be used in live
714 # migration, the compression level is an integer between 0
715 # and 9, where 0 means no compression, 1 means the best
716 # compression speed, and 9 means best compression ratio which
717 # will consume more CPU.
718 # Defaults to 1. (Since 5.0)
719 #
720 # @multifd-zstd-level: Set the compression level to be used in live
721 # migration, the compression level is an integer between 0
722 # and 20, where 0 means no compression, 1 means the best
723 # compression speed, and 20 means best compression ratio which
724 # will consume more CPU.
725 # Defaults to 1. (Since 5.0)
726 #
727 # @block-bitmap-mapping: Maps block nodes and bitmaps on them to
728 # aliases for the purpose of dirty bitmap migration. Such
729 # aliases may for example be the corresponding names on the
730 # opposite site.
731 # The mapping must be one-to-one, but not necessarily
732 # complete: On the source, unmapped bitmaps and all bitmaps
733 # on unmapped nodes will be ignored. On the destination,
734 # encountering an unmapped alias in the incoming migration
735 # stream will result in a report, and all further bitmap
736 # migration data will then be discarded.
737 # Note that the destination does not know about bitmaps it
738 # does not receive, so there is no limitation or requirement
739 # regarding the number of bitmaps received, or how they are
740 # named, or on which nodes they are placed.
741 # By default (when this parameter has never been set), bitmap
742 # names are mapped to themselves. Nodes are mapped to their
743 # block device name if there is one, and to their node name
744 # otherwise. (Since 5.2)
745 #
746 # Since: 2.4
747 ##
748 { 'enum': 'MigrationParameter',
749 'data': ['announce-initial', 'announce-max',
750 'announce-rounds', 'announce-step',
751 'compress-level', 'compress-threads', 'decompress-threads',
752 'compress-wait-thread', 'throttle-trigger-threshold',
753 'cpu-throttle-initial', 'cpu-throttle-increment',
754 'cpu-throttle-tailslow',
755 'tls-creds', 'tls-hostname', 'tls-authz', 'max-bandwidth',
756 'downtime-limit', 'x-checkpoint-delay', 'block-incremental',
757 'multifd-channels',
758 'xbzrle-cache-size', 'max-postcopy-bandwidth',
759 'max-cpu-throttle', 'multifd-compression',
760 'multifd-zlib-level' ,'multifd-zstd-level',
761 'block-bitmap-mapping' ] }
763 ##
764 # @MigrateSetParameters:
765 #
766 # @announce-initial: Initial delay (in milliseconds) before sending the first
767 # announce (Since 4.0)
768 #
769 # @announce-max: Maximum delay (in milliseconds) between packets in the
770 # announcement (Since 4.0)
771 #
772 # @announce-rounds: Number of self-announce packets sent after migration
773 # (Since 4.0)
774 #
775 # @announce-step: Increase in delay (in milliseconds) between subsequent
776 # packets in the announcement (Since 4.0)
777 #
778 # @compress-level: compression level
779 #
780 # @compress-threads: compression thread count
781 #
782 # @compress-wait-thread: Controls behavior when all compression threads are
783 # currently busy. If true (default), wait for a free
784 # compression thread to become available; otherwise,
785 # send the page uncompressed. (Since 3.1)
786 #
787 # @decompress-threads: decompression thread count
788 #
789 # @throttle-trigger-threshold: The ratio of bytes_dirty_period and bytes_xfer_period
790 # to trigger throttling. It is expressed as percentage.
791 # The default value is 50. (Since 5.0)
792 #
793 # @cpu-throttle-initial: Initial percentage of time guest cpus are
794 # throttled when migration auto-converge is activated.
795 # The default value is 20. (Since 2.7)
796 #
797 # @cpu-throttle-increment: throttle percentage increase each time
798 # auto-converge detects that migration is not making
799 # progress. The default value is 10. (Since 2.7)
800 #
801 # @cpu-throttle-tailslow: Make CPU throttling slower at tail stage
802 # At the tail stage of throttling, the Guest is very
803 # sensitive to CPU percentage while the @cpu-throttle
804 # -increment is excessive usually at tail stage.
805 # If this parameter is true, we will compute the ideal
806 # CPU percentage used by the Guest, which may exactly make
807 # the dirty rate match the dirty rate threshold. Then we
808 # will choose a smaller throttle increment between the
809 # one specified by @cpu-throttle-increment and the one
810 # generated by ideal CPU percentage.
811 # Therefore, it is compatible to traditional throttling,
812 # meanwhile the throttle increment won't be excessive
813 # at tail stage.
814 # The default value is false. (Since 5.1)
815 #
816 # @tls-creds: ID of the 'tls-creds' object that provides credentials
817 # for establishing a TLS connection over the migration data
818 # channel. On the outgoing side of the migration, the credentials
819 # must be for a 'client' endpoint, while for the incoming side the
820 # credentials must be for a 'server' endpoint. Setting this
821 # to a non-empty string enables TLS for all migrations.
822 # An empty string means that QEMU will use plain text mode for
823 # migration, rather than TLS (Since 2.9)
824 # Previously (since 2.7), this was reported by omitting
825 # tls-creds instead.
826 #
827 # @tls-hostname: hostname of the target host for the migration. This
828 # is required when using x509 based TLS credentials and the
829 # migration URI does not already include a hostname. For
830 # example if using fd: or exec: based migration, the
831 # hostname must be provided so that the server's x509
832 # certificate identity can be validated. (Since 2.7)
833 # An empty string means that QEMU will use the hostname
834 # associated with the migration URI, if any. (Since 2.9)
835 # Previously (since 2.7), this was reported by omitting
836 # tls-hostname instead.
837 #
838 # @max-bandwidth: to set maximum speed for migration. maximum speed in
839 # bytes per second. (Since 2.8)
840 #
841 # @downtime-limit: set maximum tolerated downtime for migration. maximum
842 # downtime in milliseconds (Since 2.8)
843 #
844 # @x-checkpoint-delay: the delay time between two COLO checkpoints. (Since 2.8)
845 #
846 # @block-incremental: Affects how much storage is migrated when the
847 # block migration capability is enabled. When false, the entire
848 # storage backing chain is migrated into a flattened image at
849 # the destination; when true, only the active qcow2 layer is
850 # migrated and the destination must already have access to the
851 # same backing chain as was used on the source. (since 2.10)
852 #
853 # @multifd-channels: Number of channels used to migrate data in
854 # parallel. This is the same number that the
855 # number of sockets used for migration. The
856 # default value is 2 (since 4.0)
857 #
858 # @xbzrle-cache-size: cache size to be used by XBZRLE migration. It
859 # needs to be a multiple of the target page size
860 # and a power of 2
861 # (Since 2.11)
862 #
863 # @max-postcopy-bandwidth: Background transfer bandwidth during postcopy.
864 # Defaults to 0 (unlimited). In bytes per second.
865 # (Since 3.0)
866 #
867 # @max-cpu-throttle: maximum cpu throttle percentage.
868 # The default value is 99. (Since 3.1)
869 #
870 # @multifd-compression: Which compression method to use.
871 # Defaults to none. (Since 5.0)
872 #
873 # @multifd-zlib-level: Set the compression level to be used in live
874 # migration, the compression level is an integer between 0
875 # and 9, where 0 means no compression, 1 means the best
876 # compression speed, and 9 means best compression ratio which
877 # will consume more CPU.
878 # Defaults to 1. (Since 5.0)
879 #
880 # @multifd-zstd-level: Set the compression level to be used in live
881 # migration, the compression level is an integer between 0
882 # and 20, where 0 means no compression, 1 means the best
883 # compression speed, and 20 means best compression ratio which
884 # will consume more CPU.
885 # Defaults to 1. (Since 5.0)
886 #
887 # @block-bitmap-mapping: Maps block nodes and bitmaps on them to
888 # aliases for the purpose of dirty bitmap migration. Such
889 # aliases may for example be the corresponding names on the
890 # opposite site.
891 # The mapping must be one-to-one, but not necessarily
892 # complete: On the source, unmapped bitmaps and all bitmaps
893 # on unmapped nodes will be ignored. On the destination,
894 # encountering an unmapped alias in the incoming migration
895 # stream will result in a report, and all further bitmap
896 # migration data will then be discarded.
897 # Note that the destination does not know about bitmaps it
898 # does not receive, so there is no limitation or requirement
899 # regarding the number of bitmaps received, or how they are
900 # named, or on which nodes they are placed.
901 # By default (when this parameter has never been set), bitmap
902 # names are mapped to themselves. Nodes are mapped to their
903 # block device name if there is one, and to their node name
904 # otherwise. (Since 5.2)
905 #
906 # Since: 2.4
907 ##
908 # TODO either fuse back into MigrationParameters, or make
909 # MigrationParameters members mandatory
910 { 'struct': 'MigrateSetParameters',
911 'data': { '*announce-initial': 'size',
912 '*announce-max': 'size',
913 '*announce-rounds': 'size',
914 '*announce-step': 'size',
915 '*compress-level': 'uint8',
916 '*compress-threads': 'uint8',
917 '*compress-wait-thread': 'bool',
918 '*decompress-threads': 'uint8',
919 '*throttle-trigger-threshold': 'uint8',
920 '*cpu-throttle-initial': 'uint8',
921 '*cpu-throttle-increment': 'uint8',
922 '*cpu-throttle-tailslow': 'bool',
923 '*tls-creds': 'StrOrNull',
924 '*tls-hostname': 'StrOrNull',
925 '*tls-authz': 'StrOrNull',
926 '*max-bandwidth': 'size',
927 '*downtime-limit': 'uint64',
928 '*x-checkpoint-delay': 'uint32',
929 '*block-incremental': 'bool',
930 '*multifd-channels': 'uint8',
931 '*xbzrle-cache-size': 'size',
932 '*max-postcopy-bandwidth': 'size',
933 '*max-cpu-throttle': 'uint8',
934 '*multifd-compression': 'MultiFDCompression',
935 '*multifd-zlib-level': 'uint8',
936 '*multifd-zstd-level': 'uint8',
937 '*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ] } }
939 ##
940 # @migrate-set-parameters:
941 #
942 # Set various migration parameters.
943 #
944 # Since: 2.4
945 #
946 # Example:
947 #
948 # -> { "execute": "migrate-set-parameters" ,
949 # "arguments": { "compress-level": 1 } }
950 #
951 ##
952 { 'command': 'migrate-set-parameters', 'boxed': true,
953 'data': 'MigrateSetParameters' }
955 ##
956 # @MigrationParameters:
957 #
958 # The optional members aren't actually optional.
959 #
960 # @announce-initial: Initial delay (in milliseconds) before sending the
961 # first announce (Since 4.0)
962 #
963 # @announce-max: Maximum delay (in milliseconds) between packets in the
964 # announcement (Since 4.0)
965 #
966 # @announce-rounds: Number of self-announce packets sent after migration
967 # (Since 4.0)
968 #
969 # @announce-step: Increase in delay (in milliseconds) between subsequent
970 # packets in the announcement (Since 4.0)
971 #
972 # @compress-level: compression level
973 #
974 # @compress-threads: compression thread count
975 #
976 # @compress-wait-thread: Controls behavior when all compression threads are
977 # currently busy. If true (default), wait for a free
978 # compression thread to become available; otherwise,
979 # send the page uncompressed. (Since 3.1)
980 #
981 # @decompress-threads: decompression thread count
982 #
983 # @throttle-trigger-threshold: The ratio of bytes_dirty_period and bytes_xfer_period
984 # to trigger throttling. It is expressed as percentage.
985 # The default value is 50. (Since 5.0)
986 #
987 # @cpu-throttle-initial: Initial percentage of time guest cpus are
988 # throttled when migration auto-converge is activated.
989 # (Since 2.7)
990 #
991 # @cpu-throttle-increment: throttle percentage increase each time
992 # auto-converge detects that migration is not making
993 # progress. (Since 2.7)
994 #
995 # @cpu-throttle-tailslow: Make CPU throttling slower at tail stage
996 # At the tail stage of throttling, the Guest is very
997 # sensitive to CPU percentage while the @cpu-throttle
998 # -increment is excessive usually at tail stage.
999 # If this parameter is true, we will compute the ideal
1000 # CPU percentage used by the Guest, which may exactly make
1001 # the dirty rate match the dirty rate threshold. Then we
1002 # will choose a smaller throttle increment between the
1003 # one specified by @cpu-throttle-increment and the one
1004 # generated by ideal CPU percentage.
1005 # Therefore, it is compatible to traditional throttling,
1006 # meanwhile the throttle increment won't be excessive
1007 # at tail stage.
1008 # The default value is false. (Since 5.1)
1009 #
1010 # @tls-creds: ID of the 'tls-creds' object that provides credentials
1011 # for establishing a TLS connection over the migration data
1012 # channel. On the outgoing side of the migration, the credentials
1013 # must be for a 'client' endpoint, while for the incoming side the
1014 # credentials must be for a 'server' endpoint.
1015 # An empty string means that QEMU will use plain text mode for
1016 # migration, rather than TLS (Since 2.7)
1017 # Note: 2.8 reports this by omitting tls-creds instead.
1018 #
1019 # @tls-hostname: hostname of the target host for the migration. This
1020 # is required when using x509 based TLS credentials and the
1021 # migration URI does not already include a hostname. For
1022 # example if using fd: or exec: based migration, the
1023 # hostname must be provided so that the server's x509
1024 # certificate identity can be validated. (Since 2.7)
1025 # An empty string means that QEMU will use the hostname
1026 # associated with the migration URI, if any. (Since 2.9)
1027 # Note: 2.8 reports this by omitting tls-hostname instead.
1028 #
1029 # @tls-authz: ID of the 'authz' object subclass that provides access control
1030 # checking of the TLS x509 certificate distinguished name. (Since
1031 # 4.0)
1032 #
1033 # @max-bandwidth: to set maximum speed for migration. maximum speed in
1034 # bytes per second. (Since 2.8)
1035 #
1036 # @downtime-limit: set maximum tolerated downtime for migration. maximum
1037 # downtime in milliseconds (Since 2.8)
1038 #
1039 # @x-checkpoint-delay: the delay time between two COLO checkpoints. (Since 2.8)
1040 #
1041 # @block-incremental: Affects how much storage is migrated when the
1042 # block migration capability is enabled. When false, the entire
1043 # storage backing chain is migrated into a flattened image at
1044 # the destination; when true, only the active qcow2 layer is
1045 # migrated and the destination must already have access to the
1046 # same backing chain as was used on the source. (since 2.10)
1047 #
1048 # @multifd-channels: Number of channels used to migrate data in
1049 # parallel. This is the same number that the
1050 # number of sockets used for migration.
1051 # The default value is 2 (since 4.0)
1052 #
1053 # @xbzrle-cache-size: cache size to be used by XBZRLE migration. It
1054 # needs to be a multiple of the target page size
1055 # and a power of 2
1056 # (Since 2.11)
1057 #
1058 # @max-postcopy-bandwidth: Background transfer bandwidth during postcopy.
1059 # Defaults to 0 (unlimited). In bytes per second.
1060 # (Since 3.0)
1061 #
1062 # @max-cpu-throttle: maximum cpu throttle percentage.
1063 # Defaults to 99.
1064 # (Since 3.1)
1065 #
1066 # @multifd-compression: Which compression method to use.
1067 # Defaults to none. (Since 5.0)
1068 #
1069 # @multifd-zlib-level: Set the compression level to be used in live
1070 # migration, the compression level is an integer between 0
1071 # and 9, where 0 means no compression, 1 means the best
1072 # compression speed, and 9 means best compression ratio which
1073 # will consume more CPU.
1074 # Defaults to 1. (Since 5.0)
1075 #
1076 # @multifd-zstd-level: Set the compression level to be used in live
1077 # migration, the compression level is an integer between 0
1078 # and 20, where 0 means no compression, 1 means the best
1079 # compression speed, and 20 means best compression ratio which
1080 # will consume more CPU.
1081 # Defaults to 1. (Since 5.0)
1082 #
1083 # @block-bitmap-mapping: Maps block nodes and bitmaps on them to
1084 # aliases for the purpose of dirty bitmap migration. Such
1085 # aliases may for example be the corresponding names on the
1086 # opposite site.
1087 # The mapping must be one-to-one, but not necessarily
1088 # complete: On the source, unmapped bitmaps and all bitmaps
1089 # on unmapped nodes will be ignored. On the destination,
1090 # encountering an unmapped alias in the incoming migration
1091 # stream will result in a report, and all further bitmap
1092 # migration data will then be discarded.
1093 # Note that the destination does not know about bitmaps it
1094 # does not receive, so there is no limitation or requirement
1095 # regarding the number of bitmaps received, or how they are
1096 # named, or on which nodes they are placed.
1097 # By default (when this parameter has never been set), bitmap
1098 # names are mapped to themselves. Nodes are mapped to their
1099 # block device name if there is one, and to their node name
1100 # otherwise. (Since 5.2)
1101 #
1102 # Since: 2.4
1103 ##
1104 { 'struct': 'MigrationParameters',
1105 'data': { '*announce-initial': 'size',
1106 '*announce-max': 'size',
1107 '*announce-rounds': 'size',
1108 '*announce-step': 'size',
1109 '*compress-level': 'uint8',
1110 '*compress-threads': 'uint8',
1111 '*compress-wait-thread': 'bool',
1112 '*decompress-threads': 'uint8',
1113 '*throttle-trigger-threshold': 'uint8',
1114 '*cpu-throttle-initial': 'uint8',
1115 '*cpu-throttle-increment': 'uint8',
1116 '*cpu-throttle-tailslow': 'bool',
1117 '*tls-creds': 'str',
1118 '*tls-hostname': 'str',
1119 '*tls-authz': 'str',
1120 '*max-bandwidth': 'size',
1121 '*downtime-limit': 'uint64',
1122 '*x-checkpoint-delay': 'uint32',
1123 '*block-incremental': 'bool',
1124 '*multifd-channels': 'uint8',
1125 '*xbzrle-cache-size': 'size',
1126 '*max-postcopy-bandwidth': 'size',
1127 '*max-cpu-throttle': 'uint8',
1128 '*multifd-compression': 'MultiFDCompression',
1129 '*multifd-zlib-level': 'uint8',
1130 '*multifd-zstd-level': 'uint8',
1131 '*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ] } }
1133 ##
1134 # @query-migrate-parameters:
1135 #
1136 # Returns information about the current migration parameters
1137 #
1138 # Returns: @MigrationParameters
1139 #
1140 # Since: 2.4
1141 #
1142 # Example:
1143 #
1144 # -> { "execute": "query-migrate-parameters" }
1145 # <- { "return": {
1146 # "decompress-threads": 2,
1147 # "cpu-throttle-increment": 10,
1148 # "compress-threads": 8,
1149 # "compress-level": 1,
1150 # "cpu-throttle-initial": 20,
1151 # "max-bandwidth": 33554432,
1152 # "downtime-limit": 300
1153 # }
1154 # }
1155 #
1156 ##
1157 { 'command': 'query-migrate-parameters',
1158 'returns': 'MigrationParameters' }
1160 ##
1161 # @client_migrate_info:
1162 #
1163 # Set migration information for remote display. This makes the server
1164 # ask the client to automatically reconnect using the new parameters
1165 # once migration finished successfully. Only implemented for SPICE.
1166 #
1167 # @protocol: must be "spice"
1168 # @hostname: migration target hostname
1169 # @port: spice tcp port for plaintext channels
1170 # @tls-port: spice tcp port for tls-secured channels
1171 # @cert-subject: server certificate subject
1172 #
1173 # Since: 0.14
1174 #
1175 # Example:
1176 #
1177 # -> { "execute": "client_migrate_info",
1178 # "arguments": { "protocol": "spice",
1179 # "hostname": "virt42.lab.kraxel.org",
1180 # "port": 1234 } }
1181 # <- { "return": {} }
1182 #
1183 ##
1184 { 'command': 'client_migrate_info',
1185 'data': { 'protocol': 'str', 'hostname': 'str', '*port': 'int',
1186 '*tls-port': 'int', '*cert-subject': 'str' } }
1188 ##
1189 # @migrate-start-postcopy:
1190 #
1191 # Followup to a migration command to switch the migration to postcopy mode.
1192 # The postcopy-ram capability must be set on both source and destination
1193 # before the original migration command.
1194 #
1195 # Since: 2.5
1196 #
1197 # Example:
1198 #
1199 # -> { "execute": "migrate-start-postcopy" }
1200 # <- { "return": {} }
1201 #
1202 ##
1203 { 'command': 'migrate-start-postcopy' }
1205 ##
1206 # @MIGRATION:
1207 #
1208 # Emitted when a migration event happens
1209 #
1210 # @status: @MigrationStatus describing the current migration status.
1211 #
1212 # Since: 2.4
1213 #
1214 # Example:
1215 #
1216 # <- {"timestamp": {"seconds": 1432121972, "microseconds": 744001},
1217 # "event": "MIGRATION",
1218 # "data": {"status": "completed"} }
1219 #
1220 ##
1221 { 'event': 'MIGRATION',
1222 'data': {'status': 'MigrationStatus'}}
1224 ##
1225 # @MIGRATION_PASS:
1226 #
1227 # Emitted from the source side of a migration at the start of each pass
1228 # (when it syncs the dirty bitmap)
1229 #
1230 # @pass: An incrementing count (starting at 1 on the first pass)
1231 #
1232 # Since: 2.6
1233 #
1234 # Example:
1235 #
1236 # { "timestamp": {"seconds": 1449669631, "microseconds": 239225},
1237 # "event": "MIGRATION_PASS", "data": {"pass": 2} }
1238 #
1239 ##
1240 { 'event': 'MIGRATION_PASS',
1241 'data': { 'pass': 'int' } }
1243 ##
1244 # @COLOMessage:
1245 #
1246 # The message transmission between Primary side and Secondary side.
1247 #
1248 # @checkpoint-ready: Secondary VM (SVM) is ready for checkpointing
1249 #
1250 # @checkpoint-request: Primary VM (PVM) tells SVM to prepare for checkpointing
1251 #
1252 # @checkpoint-reply: SVM gets PVM's checkpoint request
1253 #
1254 # @vmstate-send: VM's state will be sent by PVM.
1255 #
1256 # @vmstate-size: The total size of VMstate.
1257 #
1258 # @vmstate-received: VM's state has been received by SVM.
1259 #
1260 # @vmstate-loaded: VM's state has been loaded by SVM.
1261 #
1262 # Since: 2.8
1263 ##
1264 { 'enum': 'COLOMessage',
1265 'data': [ 'checkpoint-ready', 'checkpoint-request', 'checkpoint-reply',
1266 'vmstate-send', 'vmstate-size', 'vmstate-received',
1267 'vmstate-loaded' ] }
1269 ##
1270 # @COLOMode:
1271 #
1272 # The COLO current mode.
1273 #
1274 # @none: COLO is disabled.
1275 #
1276 # @primary: COLO node in primary side.
1277 #
1278 # @secondary: COLO node in slave side.
1279 #
1280 # Since: 2.8
1281 ##
1282 { 'enum': 'COLOMode',
1283 'data': [ 'none', 'primary', 'secondary'] }
1285 ##
1286 # @FailoverStatus:
1287 #
1288 # An enumeration of COLO failover status
1289 #
1290 # @none: no failover has ever happened
1291 #
1292 # @require: got failover requirement but not handled
1293 #
1294 # @active: in the process of doing failover
1295 #
1296 # @completed: finish the process of failover
1297 #
1298 # @relaunch: restart the failover process, from 'none' -> 'completed' (Since 2.9)
1299 #
1300 # Since: 2.8
1301 ##
1302 { 'enum': 'FailoverStatus',
1303 'data': [ 'none', 'require', 'active', 'completed', 'relaunch' ] }
1305 ##
1306 # @COLO_EXIT:
1307 #
1308 # Emitted when VM finishes COLO mode due to some errors happening or
1309 # at the request of users.
1310 #
1311 # @mode: report COLO mode when COLO exited.
1312 #
1313 # @reason: describes the reason for the COLO exit.
1314 #
1315 # Since: 3.1
1316 #
1317 # Example:
1318 #
1319 # <- { "timestamp": {"seconds": 2032141960, "microseconds": 417172},
1320 # "event": "COLO_EXIT", "data": {"mode": "primary", "reason": "request" } }
1321 #
1322 ##
1323 { 'event': 'COLO_EXIT',
1324 'data': {'mode': 'COLOMode', 'reason': 'COLOExitReason' } }
1326 ##
1327 # @COLOExitReason:
1328 #
1329 # The reason for a COLO exit.
1330 #
1331 # @none: failover has never happened. This state does not occur
1332 # in the COLO_EXIT event, and is only visible in the result of
1333 # query-colo-status.
1334 #
1335 # @request: COLO exit is due to an external request.
1336 #
1337 # @error: COLO exit is due to an internal error.
1338 #
1339 # @processing: COLO is currently handling a failover (since 4.0).
1340 #
1341 # Since: 3.1
1342 ##
1343 { 'enum': 'COLOExitReason',
1344 'data': [ 'none', 'request', 'error' , 'processing' ] }
1346 ##
1347 # @x-colo-lost-heartbeat:
1348 #
1349 # Tell qemu that heartbeat is lost, request it to do takeover procedures.
1350 # If this command is sent to the PVM, the Primary side will exit COLO mode.
1351 # If sent to the Secondary, the Secondary side will run failover work,
1352 # then takes over server operation to become the service VM.
1353 #
1354 # Since: 2.8
1355 #
1356 # Example:
1357 #
1358 # -> { "execute": "x-colo-lost-heartbeat" }
1359 # <- { "return": {} }
1360 #
1361 ##
1362 { 'command': 'x-colo-lost-heartbeat' }
1364 ##
1365 # @migrate_cancel:
1366 #
1367 # Cancel the current executing migration process.
1368 #
1369 # Returns: nothing on success
1370 #
1371 # Notes: This command succeeds even if there is no migration process running.
1372 #
1373 # Since: 0.14
1374 #
1375 # Example:
1376 #
1377 # -> { "execute": "migrate_cancel" }
1378 # <- { "return": {} }
1379 #
1380 ##
1381 { 'command': 'migrate_cancel' }
1383 ##
1384 # @migrate-continue:
1385 #
1386 # Continue migration when it's in a paused state.
1387 #
1388 # @state: The state the migration is currently expected to be in
1389 #
1390 # Returns: nothing on success
1391 # Since: 2.11
1392 # Example:
1393 #
1394 # -> { "execute": "migrate-continue" , "arguments":
1395 # { "state": "pre-switchover" } }
1396 # <- { "return": {} }
1397 ##
1398 { 'command': 'migrate-continue', 'data': {'state': 'MigrationStatus'} }
1400 ##
1401 # @migrate:
1402 #
1403 # Migrates the current running guest to another Virtual Machine.
1404 #
1405 # @uri: the Uniform Resource Identifier of the destination VM
1406 #
1407 # @blk: do block migration (full disk copy)
1408 #
1409 # @inc: incremental disk copy migration
1410 #
1411 # @detach: this argument exists only for compatibility reasons and
1412 # is ignored by QEMU
1413 #
1414 # @resume: resume one paused migration, default "off". (since 3.0)
1415 #
1416 # Returns: nothing on success
1417 #
1418 # Since: 0.14
1419 #
1420 # Notes:
1421 #
1422 # 1. The 'query-migrate' command should be used to check migration's progress
1423 # and final result (this information is provided by the 'status' member)
1424 #
1425 # 2. All boolean arguments default to false
1426 #
1427 # 3. The user Monitor's "detach" argument is invalid in QMP and should not
1428 # be used
1429 #
1430 # Example:
1431 #
1432 # -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } }
1433 # <- { "return": {} }
1434 #
1435 ##
1436 { 'command': 'migrate',
1437 'data': {'uri': 'str', '*blk': 'bool', '*inc': 'bool',
1438 '*detach': 'bool', '*resume': 'bool' } }
1440 ##
1441 # @migrate-incoming:
1442 #
1443 # Start an incoming migration, the qemu must have been started
1444 # with -incoming defer
1445 #
1446 # @uri: The Uniform Resource Identifier identifying the source or
1447 # address to listen on
1448 #
1449 # Returns: nothing on success
1450 #
1451 # Since: 2.3
1452 #
1453 # Notes:
1454 #
1455 # 1. It's a bad idea to use a string for the uri, but it needs to stay
1456 # compatible with -incoming and the format of the uri is already exposed
1457 # above libvirt.
1458 #
1459 # 2. QEMU must be started with -incoming defer to allow migrate-incoming to
1460 # be used.
1461 #
1462 # 3. The uri format is the same as for -incoming
1463 #
1464 # Example:
1465 #
1466 # -> { "execute": "migrate-incoming",
1467 # "arguments": { "uri": "tcp::4446" } }
1468 # <- { "return": {} }
1469 #
1470 ##
1471 { 'command': 'migrate-incoming', 'data': {'uri': 'str' } }
1473 ##
1474 # @xen-save-devices-state:
1475 #
1476 # Save the state of all devices to file. The RAM and the block devices
1477 # of the VM are not saved by this command.
1478 #
1479 # @filename: the file to save the state of the devices to as binary
1480 # data. See xen-save-devices-state.txt for a description of the binary
1481 # format.
1482 #
1483 # @live: Optional argument to ask QEMU to treat this command as part of a live
1484 # migration. Default to true. (since 2.11)
1485 #
1486 # Returns: Nothing on success
1487 #
1488 # Since: 1.1
1489 #
1490 # Example:
1491 #
1492 # -> { "execute": "xen-save-devices-state",
1493 # "arguments": { "filename": "/tmp/save" } }
1494 # <- { "return": {} }
1495 #
1496 ##
1497 { 'command': 'xen-save-devices-state',
1498 'data': {'filename': 'str', '*live':'bool' } }
1500 ##
1501 # @xen-set-global-dirty-log:
1502 #
1503 # Enable or disable the global dirty log mode.
1504 #
1505 # @enable: true to enable, false to disable.
1506 #
1507 # Returns: nothing
1508 #
1509 # Since: 1.3
1510 #
1511 # Example:
1512 #
1513 # -> { "execute": "xen-set-global-dirty-log",
1514 # "arguments": { "enable": true } }
1515 # <- { "return": {} }
1516 #
1517 ##
1518 { 'command': 'xen-set-global-dirty-log', 'data': { 'enable': 'bool' } }
1520 ##
1521 # @xen-load-devices-state:
1522 #
1523 # Load the state of all devices from file. The RAM and the block devices
1524 # of the VM are not loaded by this command.
1525 #
1526 # @filename: the file to load the state of the devices from as binary
1527 # data. See xen-save-devices-state.txt for a description of the binary
1528 # format.
1529 #
1530 # Since: 2.7
1531 #
1532 # Example:
1533 #
1534 # -> { "execute": "xen-load-devices-state",
1535 # "arguments": { "filename": "/tmp/resume" } }
1536 # <- { "return": {} }
1537 #
1538 ##
1539 { 'command': 'xen-load-devices-state', 'data': {'filename': 'str'} }
1541 ##
1542 # @xen-set-replication:
1543 #
1544 # Enable or disable replication.
1545 #
1546 # @enable: true to enable, false to disable.
1547 #
1548 # @primary: true for primary or false for secondary.
1549 #
1550 # @failover: true to do failover, false to stop. but cannot be
1551 # specified if 'enable' is true. default value is false.
1552 #
1553 # Returns: nothing.
1554 #
1555 # Example:
1556 #
1557 # -> { "execute": "xen-set-replication",
1558 # "arguments": {"enable": true, "primary": false} }
1559 # <- { "return": {} }
1560 #
1561 # Since: 2.9
1562 ##
1563 { 'command': 'xen-set-replication',
1564 'data': { 'enable': 'bool', 'primary': 'bool', '*failover' : 'bool' },
1565 'if': 'defined(CONFIG_REPLICATION)' }
1567 ##
1568 # @ReplicationStatus:
1569 #
1570 # The result format for 'query-xen-replication-status'.
1571 #
1572 # @error: true if an error happened, false if replication is normal.
1573 #
1574 # @desc: the human readable error description string, when
1575 # @error is 'true'.
1576 #
1577 # Since: 2.9
1578 ##
1579 { 'struct': 'ReplicationStatus',
1580 'data': { 'error': 'bool', '*desc': 'str' },
1581 'if': 'defined(CONFIG_REPLICATION)' }
1583 ##
1584 # @query-xen-replication-status:
1585 #
1586 # Query replication status while the vm is running.
1587 #
1588 # Returns: A @ReplicationResult object showing the status.
1589 #
1590 # Example:
1591 #
1592 # -> { "execute": "query-xen-replication-status" }
1593 # <- { "return": { "error": false } }
1594 #
1595 # Since: 2.9
1596 ##
1597 { 'command': 'query-xen-replication-status',
1598 'returns': 'ReplicationStatus',
1599 'if': 'defined(CONFIG_REPLICATION)' }
1601 ##
1602 # @xen-colo-do-checkpoint:
1603 #
1604 # Xen uses this command to notify replication to trigger a checkpoint.
1605 #
1606 # Returns: nothing.
1607 #
1608 # Example:
1609 #
1610 # -> { "execute": "xen-colo-do-checkpoint" }
1611 # <- { "return": {} }
1612 #
1613 # Since: 2.9
1614 ##
1615 { 'command': 'xen-colo-do-checkpoint',
1616 'if': 'defined(CONFIG_REPLICATION)' }
1618 ##
1619 # @COLOStatus:
1620 #
1621 # The result format for 'query-colo-status'.
1622 #
1623 # @mode: COLO running mode. If COLO is running, this field will return
1624 # 'primary' or 'secondary'.
1625 #
1626 # @last-mode: COLO last running mode. If COLO is running, this field
1627 # will return same like mode field, after failover we can
1628 # use this field to get last colo mode. (since 4.0)
1629 #
1630 # @reason: describes the reason for the COLO exit.
1631 #
1632 # Since: 3.1
1633 ##
1634 { 'struct': 'COLOStatus',
1635 'data': { 'mode': 'COLOMode', 'last-mode': 'COLOMode',
1636 'reason': 'COLOExitReason' } }
1638 ##
1639 # @query-colo-status:
1640 #
1641 # Query COLO status while the vm is running.
1642 #
1643 # Returns: A @COLOStatus object showing the status.
1644 #
1645 # Example:
1646 #
1647 # -> { "execute": "query-colo-status" }
1648 # <- { "return": { "mode": "primary", "reason": "request" } }
1649 #
1650 # Since: 3.1
1651 ##
1652 { 'command': 'query-colo-status',
1653 'returns': 'COLOStatus' }
1655 ##
1656 # @migrate-recover:
1657 #
1658 # Provide a recovery migration stream URI.
1659 #
1660 # @uri: the URI to be used for the recovery of migration stream.
1661 #
1662 # Returns: nothing.
1663 #
1664 # Example:
1665 #
1666 # -> { "execute": "migrate-recover",
1667 # "arguments": { "uri": "tcp:192.168.1.200:12345" } }
1668 # <- { "return": {} }
1669 #
1670 # Since: 3.0
1671 ##
1672 { 'command': 'migrate-recover',
1673 'data': { 'uri': 'str' },
1674 'allow-oob': true }
1676 ##
1677 # @migrate-pause:
1678 #
1679 # Pause a migration. Currently it only supports postcopy.
1680 #
1681 # Returns: nothing.
1682 #
1683 # Example:
1684 #
1685 # -> { "execute": "migrate-pause" }
1686 # <- { "return": {} }
1687 #
1688 # Since: 3.0
1689 ##
1690 { 'command': 'migrate-pause', 'allow-oob': true }
1692 ##
1693 # @UNPLUG_PRIMARY:
1694 #
1695 # Emitted from source side of a migration when migration state is
1696 # WAIT_UNPLUG. Device was unplugged by guest operating system.
1697 # Device resources in QEMU are kept on standby to be able to re-plug it in case
1698 # of migration failure.
1699 #
1700 # @device-id: QEMU device id of the unplugged device
1701 #
1702 # Since: 4.2
1703 #
1704 # Example:
1705 # {"event": "UNPLUG_PRIMARY", "data": {"device-id": "hostdev0"} }
1706 #
1707 ##
1708 { 'event': 'UNPLUG_PRIMARY',
1709 'data': { 'device-id': 'str' } }
1711 ##
1712 # @DirtyRateStatus:
1713 #
1714 # An enumeration of dirtyrate status.
1715 #
1716 # @unstarted: the dirtyrate thread has not been started.
1717 #
1718 # @measuring: the dirtyrate thread is measuring.
1719 #
1720 # @measured: the dirtyrate thread has measured and results are available.
1721 #
1722 # Since: 5.2
1723 #
1724 ##
1725 { 'enum': 'DirtyRateStatus',
1726 'data': [ 'unstarted', 'measuring', 'measured'] }
1728 ##
1729 # @DirtyRateInfo:
1730 #
1731 # Information about current dirty page rate of vm.
1732 #
1733 # @dirty-rate: an estimate of the dirty page rate of the VM in units of
1734 # MB/s, present only when estimating the rate has completed.
1735 #
1736 # @status: status containing dirtyrate query status includes
1737 # 'unstarted' or 'measuring' or 'measured'
1738 #
1739 # @start-time: start time in units of second for calculation
1740 #
1741 # @calc-time: time in units of second for sample dirty pages
1742 #
1743 # @sample-pages: page count per GB for sample dirty pages
1744 # the default value is 512 (since 6.1)
1745 #
1746 # Since: 5.2
1747 #
1748 ##
1749 { 'struct': 'DirtyRateInfo',
1750 'data': {'*dirty-rate': 'int64',
1751 'status': 'DirtyRateStatus',
1752 'start-time': 'int64',
1753 'calc-time': 'int64',
1754 'sample-pages': 'uint64'} }
1756 ##
1757 # @calc-dirty-rate:
1758 #
1759 # start calculating dirty page rate for vm
1760 #
1761 # @calc-time: time in units of second for sample dirty pages
1762 #
1763 # @sample-pages: page count per GB for sample dirty pages
1764 # the default value is 512 (since 6.1)
1765 #
1766 # Since: 5.2
1767 #
1768 # Example:
1769 # {"command": "calc-dirty-rate", "data": {"calc-time": 1,
1770 # 'sample-pages': 512} }
1771 #
1772 ##
1773 { 'command': 'calc-dirty-rate', 'data': {'calc-time': 'int64',
1774 '*sample-pages': 'int'} }
1776 ##
1777 # @query-dirty-rate:
1778 #
1779 # query dirty page rate in units of MB/s for vm
1780 #
1781 # Since: 5.2
1782 ##
1783 { 'command': 'query-dirty-rate', 'returns': 'DirtyRateInfo' }
1785 ##
1786 # @snapshot-save:
1787 #
1788 # Save a VM snapshot
1789 #
1790 # @job-id: identifier for the newly created job
1791 # @tag: name of the snapshot to create
1792 # @vmstate: block device node name to save vmstate to
1793 # @devices: list of block device node names to save a snapshot to
1794 #
1795 # Applications should not assume that the snapshot save is complete
1796 # when this command returns. The job commands / events must be used
1797 # to determine completion and to fetch details of any errors that arise.
1798 #
1799 # Note that execution of the guest CPUs may be stopped during the
1800 # time it takes to save the snapshot. A future version of QEMU
1801 # may ensure CPUs are executing continuously.
1802 #
1803 # It is strongly recommended that @devices contain all writable
1804 # block device nodes if a consistent snapshot is required.
1805 #
1806 # If @tag already exists, an error will be reported
1807 #
1808 # Returns: nothing
1809 #
1810 # Example:
1811 #
1812 # -> { "execute": "snapshot-save",
1813 # "data": {
1814 # "job-id": "snapsave0",
1815 # "tag": "my-snap",
1816 # "vmstate": "disk0",
1817 # "devices": ["disk0", "disk1"]
1818 # }
1819 # }
1820 # <- { "return": { } }
1821 # <- {"event": "JOB_STATUS_CHANGE",
1822 # "data": {"status": "created", "id": "snapsave0"}}
1823 # <- {"event": "JOB_STATUS_CHANGE",
1824 # "data": {"status": "running", "id": "snapsave0"}}
1825 # <- {"event": "STOP"}
1826 # <- {"event": "RESUME"}
1827 # <- {"event": "JOB_STATUS_CHANGE",
1828 # "data": {"status": "waiting", "id": "snapsave0"}}
1829 # <- {"event": "JOB_STATUS_CHANGE",
1830 # "data": {"status": "pending", "id": "snapsave0"}}
1831 # <- {"event": "JOB_STATUS_CHANGE",
1832 # "data": {"status": "concluded", "id": "snapsave0"}}
1833 # -> {"execute": "query-jobs"}
1834 # <- {"return": [{"current-progress": 1,
1835 # "status": "concluded",
1836 # "total-progress": 1,
1837 # "type": "snapshot-save",
1838 # "id": "snapsave0"}]}
1839 #
1840 # Since: 6.0
1841 ##
1842 { 'command': 'snapshot-save',
1843 'data': { 'job-id': 'str',
1844 'tag': 'str',
1845 'vmstate': 'str',
1846 'devices': ['str'] } }
1848 ##
1849 # @snapshot-load:
1850 #
1851 # Load a VM snapshot
1852 #
1853 # @job-id: identifier for the newly created job
1854 # @tag: name of the snapshot to load.
1855 # @vmstate: block device node name to load vmstate from
1856 # @devices: list of block device node names to load a snapshot from
1857 #
1858 # Applications should not assume that the snapshot load is complete
1859 # when this command returns. The job commands / events must be used
1860 # to determine completion and to fetch details of any errors that arise.
1861 #
1862 # Note that execution of the guest CPUs will be stopped during the
1863 # time it takes to load the snapshot.
1864 #
1865 # It is strongly recommended that @devices contain all writable
1866 # block device nodes that can have changed since the original
1867 # @snapshot-save command execution.
1868 #
1869 # Returns: nothing
1870 #
1871 # Example:
1872 #
1873 # -> { "execute": "snapshot-load",
1874 # "data": {
1875 # "job-id": "snapload0",
1876 # "tag": "my-snap",
1877 # "vmstate": "disk0",
1878 # "devices": ["disk0", "disk1"]
1879 # }
1880 # }
1881 # <- { "return": { } }
1882 # <- {"event": "JOB_STATUS_CHANGE",
1883 # "data": {"status": "created", "id": "snapload0"}}
1884 # <- {"event": "JOB_STATUS_CHANGE",
1885 # "data": {"status": "running", "id": "snapload0"}}
1886 # <- {"event": "STOP"}
1887 # <- {"event": "RESUME"}
1888 # <- {"event": "JOB_STATUS_CHANGE",
1889 # "data": {"status": "waiting", "id": "snapload0"}}
1890 # <- {"event": "JOB_STATUS_CHANGE",
1891 # "data": {"status": "pending", "id": "snapload0"}}
1892 # <- {"event": "JOB_STATUS_CHANGE",
1893 # "data": {"status": "concluded", "id": "snapload0"}}
1894 # -> {"execute": "query-jobs"}
1895 # <- {"return": [{"current-progress": 1,
1896 # "status": "concluded",
1897 # "total-progress": 1,
1898 # "type": "snapshot-load",
1899 # "id": "snapload0"}]}
1900 #
1901 # Since: 6.0
1902 ##
1903 { 'command': 'snapshot-load',
1904 'data': { 'job-id': 'str',
1905 'tag': 'str',
1906 'vmstate': 'str',
1907 'devices': ['str'] } }
1909 ##
1910 # @snapshot-delete:
1911 #
1912 # Delete a VM snapshot
1913 #
1914 # @job-id: identifier for the newly created job
1915 # @tag: name of the snapshot to delete.
1916 # @devices: list of block device node names to delete a snapshot from
1917 #
1918 # Applications should not assume that the snapshot delete is complete
1919 # when this command returns. The job commands / events must be used
1920 # to determine completion and to fetch details of any errors that arise.
1921 #
1922 # Returns: nothing
1923 #
1924 # Example:
1925 #
1926 # -> { "execute": "snapshot-delete",
1927 # "data": {
1928 # "job-id": "snapdelete0",
1929 # "tag": "my-snap",
1930 # "devices": ["disk0", "disk1"]
1931 # }
1932 # }
1933 # <- { "return": { } }
1934 # <- {"event": "JOB_STATUS_CHANGE",
1935 # "data": {"status": "created", "id": "snapdelete0"}}
1936 # <- {"event": "JOB_STATUS_CHANGE",
1937 # "data": {"status": "running", "id": "snapdelete0"}}
1938 # <- {"event": "JOB_STATUS_CHANGE",
1939 # "data": {"status": "waiting", "id": "snapdelete0"}}
1940 # <- {"event": "JOB_STATUS_CHANGE",
1941 # "data": {"status": "pending", "id": "snapdelete0"}}
1942 # <- {"event": "JOB_STATUS_CHANGE",
1943 # "data": {"status": "concluded", "id": "snapdelete0"}}
1944 # -> {"execute": "query-jobs"}
1945 # <- {"return": [{"current-progress": 1,
1946 # "status": "concluded",
1947 # "total-progress": 1,
1948 # "type": "snapshot-delete",
1949 # "id": "snapdelete0"}]}
1950 #
1951 # Since: 6.0
1952 ##
1953 { 'command': 'snapshot-delete',
1954 'data': { 'job-id': 'str',
1955 'tag': 'str',
1956 'devices': ['str'] } }