2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "block/qapi.h"
36 #include "qmp-commands.h"
37 #include "qemu/timer.h"
40 #include <sys/types.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
53 struct BdrvDirtyBitmap
{
55 QLIST_ENTRY(BdrvDirtyBitmap
) list
;
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
60 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
);
61 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
62 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
63 BlockDriverCompletionFunc
*cb
, void *opaque
);
64 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
65 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
66 BlockDriverCompletionFunc
*cb
, void *opaque
);
67 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
68 int64_t sector_num
, int nb_sectors
,
70 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
71 int64_t sector_num
, int nb_sectors
,
73 static int coroutine_fn
bdrv_co_do_preadv(BlockDriverState
*bs
,
74 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
75 BdrvRequestFlags flags
);
76 static int coroutine_fn
bdrv_co_do_pwritev(BlockDriverState
*bs
,
77 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
78 BdrvRequestFlags flags
);
79 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
83 BdrvRequestFlags flags
,
84 BlockDriverCompletionFunc
*cb
,
87 static void coroutine_fn
bdrv_co_do_rw(void *opaque
);
88 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
89 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
);
91 static QTAILQ_HEAD(, BlockDriverState
) bdrv_states
=
92 QTAILQ_HEAD_INITIALIZER(bdrv_states
);
94 static QTAILQ_HEAD(, BlockDriverState
) graph_bdrv_states
=
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states
);
97 static QLIST_HEAD(, BlockDriver
) bdrv_drivers
=
98 QLIST_HEAD_INITIALIZER(bdrv_drivers
);
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist
;
104 static int is_windows_drive_prefix(const char *filename
)
106 return (((filename
[0] >= 'a' && filename
[0] <= 'z') ||
107 (filename
[0] >= 'A' && filename
[0] <= 'Z')) &&
111 int is_windows_drive(const char *filename
)
113 if (is_windows_drive_prefix(filename
) &&
116 if (strstart(filename
, "\\\\.\\", NULL
) ||
117 strstart(filename
, "//./", NULL
))
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState
*bs
,
129 throttle_config(&bs
->throttle_state
, cfg
);
131 for (i
= 0; i
< 2; i
++) {
132 qemu_co_enter_next(&bs
->throttled_reqs
[i
]);
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState
*bs
)
139 bool drained
= false;
140 bool enabled
= bs
->io_limits_enabled
;
143 bs
->io_limits_enabled
= false;
145 for (i
= 0; i
< 2; i
++) {
146 while (qemu_co_enter_next(&bs
->throttled_reqs
[i
])) {
151 bs
->io_limits_enabled
= enabled
;
156 void bdrv_io_limits_disable(BlockDriverState
*bs
)
158 bs
->io_limits_enabled
= false;
160 bdrv_start_throttled_reqs(bs
);
162 throttle_destroy(&bs
->throttle_state
);
165 static void bdrv_throttle_read_timer_cb(void *opaque
)
167 BlockDriverState
*bs
= opaque
;
168 qemu_co_enter_next(&bs
->throttled_reqs
[0]);
171 static void bdrv_throttle_write_timer_cb(void *opaque
)
173 BlockDriverState
*bs
= opaque
;
174 qemu_co_enter_next(&bs
->throttled_reqs
[1]);
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState
*bs
)
180 assert(!bs
->io_limits_enabled
);
181 throttle_init(&bs
->throttle_state
,
183 bdrv_throttle_read_timer_cb
,
184 bdrv_throttle_write_timer_cb
,
186 bs
->io_limits_enabled
= true;
189 /* This function makes an IO wait if needed
191 * @nb_sectors: the number of sectors of the IO
192 * @is_write: is the IO a write
194 static void bdrv_io_limits_intercept(BlockDriverState
*bs
,
198 /* does this io must wait */
199 bool must_wait
= throttle_schedule_timer(&bs
->throttle_state
, is_write
);
201 /* if must wait or any request of this type throttled queue the IO */
203 !qemu_co_queue_empty(&bs
->throttled_reqs
[is_write
])) {
204 qemu_co_queue_wait(&bs
->throttled_reqs
[is_write
]);
207 /* the IO will be executed, do the accounting */
208 throttle_account(&bs
->throttle_state
, is_write
, bytes
);
211 /* if the next request must wait -> do nothing */
212 if (throttle_schedule_timer(&bs
->throttle_state
, is_write
)) {
216 /* else queue next request for execution */
217 qemu_co_queue_next(&bs
->throttled_reqs
[is_write
]);
220 size_t bdrv_opt_mem_align(BlockDriverState
*bs
)
222 if (!bs
|| !bs
->drv
) {
223 /* 4k should be on the safe side */
227 return bs
->bl
.opt_mem_alignment
;
230 /* check if the path starts with "<protocol>:" */
231 static int path_has_protocol(const char *path
)
236 if (is_windows_drive(path
) ||
237 is_windows_drive_prefix(path
)) {
240 p
= path
+ strcspn(path
, ":/\\");
242 p
= path
+ strcspn(path
, ":/");
248 int path_is_absolute(const char *path
)
251 /* specific case for names like: "\\.\d:" */
252 if (is_windows_drive(path
) || is_windows_drive_prefix(path
)) {
255 return (*path
== '/' || *path
== '\\');
257 return (*path
== '/');
261 /* if filename is absolute, just copy it to dest. Otherwise, build a
262 path to it by considering it is relative to base_path. URL are
264 void path_combine(char *dest
, int dest_size
,
265 const char *base_path
,
266 const char *filename
)
273 if (path_is_absolute(filename
)) {
274 pstrcpy(dest
, dest_size
, filename
);
276 p
= strchr(base_path
, ':');
281 p1
= strrchr(base_path
, '/');
285 p2
= strrchr(base_path
, '\\');
297 if (len
> dest_size
- 1)
299 memcpy(dest
, base_path
, len
);
301 pstrcat(dest
, dest_size
, filename
);
305 void bdrv_get_full_backing_filename(BlockDriverState
*bs
, char *dest
, size_t sz
)
307 if (bs
->backing_file
[0] == '\0' || path_has_protocol(bs
->backing_file
)) {
308 pstrcpy(dest
, sz
, bs
->backing_file
);
310 path_combine(dest
, sz
, bs
->filename
, bs
->backing_file
);
314 void bdrv_register(BlockDriver
*bdrv
)
316 /* Block drivers without coroutine functions need emulation */
317 if (!bdrv
->bdrv_co_readv
) {
318 bdrv
->bdrv_co_readv
= bdrv_co_readv_em
;
319 bdrv
->bdrv_co_writev
= bdrv_co_writev_em
;
321 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
322 * the block driver lacks aio we need to emulate that too.
324 if (!bdrv
->bdrv_aio_readv
) {
325 /* add AIO emulation layer */
326 bdrv
->bdrv_aio_readv
= bdrv_aio_readv_em
;
327 bdrv
->bdrv_aio_writev
= bdrv_aio_writev_em
;
331 QLIST_INSERT_HEAD(&bdrv_drivers
, bdrv
, list
);
334 /* create a new block device (by default it is empty) */
335 BlockDriverState
*bdrv_new(const char *device_name
, Error
**errp
)
337 BlockDriverState
*bs
;
340 if (bdrv_find(device_name
)) {
341 error_setg(errp
, "Device with id '%s' already exists",
345 if (bdrv_find_node(device_name
)) {
346 error_setg(errp
, "Device with node-name '%s' already exists",
351 bs
= g_malloc0(sizeof(BlockDriverState
));
352 QLIST_INIT(&bs
->dirty_bitmaps
);
353 pstrcpy(bs
->device_name
, sizeof(bs
->device_name
), device_name
);
354 if (device_name
[0] != '\0') {
355 QTAILQ_INSERT_TAIL(&bdrv_states
, bs
, device_list
);
357 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
358 QLIST_INIT(&bs
->op_blockers
[i
]);
360 bdrv_iostatus_disable(bs
);
361 notifier_list_init(&bs
->close_notifiers
);
362 notifier_with_return_list_init(&bs
->before_write_notifiers
);
363 qemu_co_queue_init(&bs
->throttled_reqs
[0]);
364 qemu_co_queue_init(&bs
->throttled_reqs
[1]);
370 void bdrv_add_close_notifier(BlockDriverState
*bs
, Notifier
*notify
)
372 notifier_list_add(&bs
->close_notifiers
, notify
);
375 BlockDriver
*bdrv_find_format(const char *format_name
)
378 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
379 if (!strcmp(drv1
->format_name
, format_name
)) {
386 static int bdrv_is_whitelisted(BlockDriver
*drv
, bool read_only
)
388 static const char *whitelist_rw
[] = {
389 CONFIG_BDRV_RW_WHITELIST
391 static const char *whitelist_ro
[] = {
392 CONFIG_BDRV_RO_WHITELIST
396 if (!whitelist_rw
[0] && !whitelist_ro
[0]) {
397 return 1; /* no whitelist, anything goes */
400 for (p
= whitelist_rw
; *p
; p
++) {
401 if (!strcmp(drv
->format_name
, *p
)) {
406 for (p
= whitelist_ro
; *p
; p
++) {
407 if (!strcmp(drv
->format_name
, *p
)) {
415 BlockDriver
*bdrv_find_whitelisted_format(const char *format_name
,
418 BlockDriver
*drv
= bdrv_find_format(format_name
);
419 return drv
&& bdrv_is_whitelisted(drv
, read_only
) ? drv
: NULL
;
422 typedef struct CreateCo
{
425 QEMUOptionParameter
*options
;
430 static void coroutine_fn
bdrv_create_co_entry(void *opaque
)
432 Error
*local_err
= NULL
;
435 CreateCo
*cco
= opaque
;
438 ret
= cco
->drv
->bdrv_create(cco
->filename
, cco
->options
, &local_err
);
440 error_propagate(&cco
->err
, local_err
);
445 int bdrv_create(BlockDriver
*drv
, const char* filename
,
446 QEMUOptionParameter
*options
, Error
**errp
)
453 .filename
= g_strdup(filename
),
459 if (!drv
->bdrv_create
) {
460 error_setg(errp
, "Driver '%s' does not support image creation", drv
->format_name
);
465 if (qemu_in_coroutine()) {
466 /* Fast-path if already in coroutine context */
467 bdrv_create_co_entry(&cco
);
469 co
= qemu_coroutine_create(bdrv_create_co_entry
);
470 qemu_coroutine_enter(co
, &cco
);
471 while (cco
.ret
== NOT_DONE
) {
479 error_propagate(errp
, cco
.err
);
481 error_setg_errno(errp
, -ret
, "Could not create image");
486 g_free(cco
.filename
);
490 int bdrv_create_file(const char* filename
, QEMUOptionParameter
*options
,
494 Error
*local_err
= NULL
;
497 drv
= bdrv_find_protocol(filename
, true);
499 error_setg(errp
, "Could not find protocol for file '%s'", filename
);
503 ret
= bdrv_create(drv
, filename
, options
, &local_err
);
505 error_propagate(errp
, local_err
);
510 int bdrv_refresh_limits(BlockDriverState
*bs
)
512 BlockDriver
*drv
= bs
->drv
;
514 memset(&bs
->bl
, 0, sizeof(bs
->bl
));
520 /* Take some limits from the children as a default */
522 bdrv_refresh_limits(bs
->file
);
523 bs
->bl
.opt_transfer_length
= bs
->file
->bl
.opt_transfer_length
;
524 bs
->bl
.opt_mem_alignment
= bs
->file
->bl
.opt_mem_alignment
;
526 bs
->bl
.opt_mem_alignment
= 512;
529 if (bs
->backing_hd
) {
530 bdrv_refresh_limits(bs
->backing_hd
);
531 bs
->bl
.opt_transfer_length
=
532 MAX(bs
->bl
.opt_transfer_length
,
533 bs
->backing_hd
->bl
.opt_transfer_length
);
534 bs
->bl
.opt_mem_alignment
=
535 MAX(bs
->bl
.opt_mem_alignment
,
536 bs
->backing_hd
->bl
.opt_mem_alignment
);
539 /* Then let the driver override it */
540 if (drv
->bdrv_refresh_limits
) {
541 return drv
->bdrv_refresh_limits(bs
);
548 * Create a uniquely-named empty temporary file.
549 * Return 0 upon success, otherwise a negative errno value.
551 int get_tmp_filename(char *filename
, int size
)
554 char temp_dir
[MAX_PATH
];
555 /* GetTempFileName requires that its output buffer (4th param)
556 have length MAX_PATH or greater. */
557 assert(size
>= MAX_PATH
);
558 return (GetTempPath(MAX_PATH
, temp_dir
)
559 && GetTempFileName(temp_dir
, "qem", 0, filename
)
560 ? 0 : -GetLastError());
564 tmpdir
= getenv("TMPDIR");
568 if (snprintf(filename
, size
, "%s/vl.XXXXXX", tmpdir
) >= size
) {
571 fd
= mkstemp(filename
);
575 if (close(fd
) != 0) {
584 * Detect host devices. By convention, /dev/cdrom[N] is always
585 * recognized as a host CDROM.
587 static BlockDriver
*find_hdev_driver(const char *filename
)
589 int score_max
= 0, score
;
590 BlockDriver
*drv
= NULL
, *d
;
592 QLIST_FOREACH(d
, &bdrv_drivers
, list
) {
593 if (d
->bdrv_probe_device
) {
594 score
= d
->bdrv_probe_device(filename
);
595 if (score
> score_max
) {
605 BlockDriver
*bdrv_find_protocol(const char *filename
,
606 bool allow_protocol_prefix
)
613 /* TODO Drivers without bdrv_file_open must be specified explicitly */
616 * XXX(hch): we really should not let host device detection
617 * override an explicit protocol specification, but moving this
618 * later breaks access to device names with colons in them.
619 * Thanks to the brain-dead persistent naming schemes on udev-
620 * based Linux systems those actually are quite common.
622 drv1
= find_hdev_driver(filename
);
627 if (!path_has_protocol(filename
) || !allow_protocol_prefix
) {
628 return bdrv_find_format("file");
631 p
= strchr(filename
, ':');
634 if (len
> sizeof(protocol
) - 1)
635 len
= sizeof(protocol
) - 1;
636 memcpy(protocol
, filename
, len
);
637 protocol
[len
] = '\0';
638 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
639 if (drv1
->protocol_name
&&
640 !strcmp(drv1
->protocol_name
, protocol
)) {
647 static int find_image_format(BlockDriverState
*bs
, const char *filename
,
648 BlockDriver
**pdrv
, Error
**errp
)
650 int score
, score_max
;
651 BlockDriver
*drv1
, *drv
;
655 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
656 if (bs
->sg
|| !bdrv_is_inserted(bs
) || bdrv_getlength(bs
) == 0) {
657 drv
= bdrv_find_format("raw");
659 error_setg(errp
, "Could not find raw image format");
666 ret
= bdrv_pread(bs
, 0, buf
, sizeof(buf
));
668 error_setg_errno(errp
, -ret
, "Could not read image for determining its "
676 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
677 if (drv1
->bdrv_probe
) {
678 score
= drv1
->bdrv_probe(buf
, ret
, filename
);
679 if (score
> score_max
) {
686 error_setg(errp
, "Could not determine image format: No compatible "
695 * Set the current 'total_sectors' value
697 static int refresh_total_sectors(BlockDriverState
*bs
, int64_t hint
)
699 BlockDriver
*drv
= bs
->drv
;
701 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
705 /* query actual device if possible, otherwise just trust the hint */
706 if (drv
->bdrv_getlength
) {
707 int64_t length
= drv
->bdrv_getlength(bs
);
711 hint
= DIV_ROUND_UP(length
, BDRV_SECTOR_SIZE
);
714 bs
->total_sectors
= hint
;
719 * Set open flags for a given discard mode
721 * Return 0 on success, -1 if the discard mode was invalid.
723 int bdrv_parse_discard_flags(const char *mode
, int *flags
)
725 *flags
&= ~BDRV_O_UNMAP
;
727 if (!strcmp(mode
, "off") || !strcmp(mode
, "ignore")) {
729 } else if (!strcmp(mode
, "on") || !strcmp(mode
, "unmap")) {
730 *flags
|= BDRV_O_UNMAP
;
739 * Set open flags for a given cache mode
741 * Return 0 on success, -1 if the cache mode was invalid.
743 int bdrv_parse_cache_flags(const char *mode
, int *flags
)
745 *flags
&= ~BDRV_O_CACHE_MASK
;
747 if (!strcmp(mode
, "off") || !strcmp(mode
, "none")) {
748 *flags
|= BDRV_O_NOCACHE
| BDRV_O_CACHE_WB
;
749 } else if (!strcmp(mode
, "directsync")) {
750 *flags
|= BDRV_O_NOCACHE
;
751 } else if (!strcmp(mode
, "writeback")) {
752 *flags
|= BDRV_O_CACHE_WB
;
753 } else if (!strcmp(mode
, "unsafe")) {
754 *flags
|= BDRV_O_CACHE_WB
;
755 *flags
|= BDRV_O_NO_FLUSH
;
756 } else if (!strcmp(mode
, "writethrough")) {
757 /* this is the default */
766 * The copy-on-read flag is actually a reference count so multiple users may
767 * use the feature without worrying about clobbering its previous state.
768 * Copy-on-read stays enabled until all users have called to disable it.
770 void bdrv_enable_copy_on_read(BlockDriverState
*bs
)
775 void bdrv_disable_copy_on_read(BlockDriverState
*bs
)
777 assert(bs
->copy_on_read
> 0);
782 * Returns the flags that a temporary snapshot should get, based on the
783 * originally requested flags (the originally requested image will have flags
784 * like a backing file)
786 static int bdrv_temp_snapshot_flags(int flags
)
788 return (flags
& ~BDRV_O_SNAPSHOT
) | BDRV_O_TEMPORARY
;
792 * Returns the flags that bs->file should get, based on the given flags for
795 static int bdrv_inherited_flags(int flags
)
797 /* Enable protocol handling, disable format probing for bs->file */
798 flags
|= BDRV_O_PROTOCOL
;
800 /* Our block drivers take care to send flushes and respect unmap policy,
801 * so we can enable both unconditionally on lower layers. */
802 flags
|= BDRV_O_CACHE_WB
| BDRV_O_UNMAP
;
804 /* Clear flags that only apply to the top layer */
805 flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
| BDRV_O_COPY_ON_READ
);
811 * Returns the flags that bs->backing_hd should get, based on the given flags
814 static int bdrv_backing_flags(int flags
)
816 /* backing files always opened read-only */
817 flags
&= ~(BDRV_O_RDWR
| BDRV_O_COPY_ON_READ
);
819 /* snapshot=on is handled on the top layer */
820 flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_TEMPORARY
);
825 static int bdrv_open_flags(BlockDriverState
*bs
, int flags
)
827 int open_flags
= flags
| BDRV_O_CACHE_WB
;
830 * Clear flags that are internal to the block layer before opening the
833 open_flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
836 * Snapshots should be writable.
838 if (flags
& BDRV_O_TEMPORARY
) {
839 open_flags
|= BDRV_O_RDWR
;
845 static void bdrv_assign_node_name(BlockDriverState
*bs
,
846 const char *node_name
,
853 /* empty string node name is invalid */
854 if (node_name
[0] == '\0') {
855 error_setg(errp
, "Empty node name");
859 /* takes care of avoiding namespaces collisions */
860 if (bdrv_find(node_name
)) {
861 error_setg(errp
, "node-name=%s is conflicting with a device id",
866 /* takes care of avoiding duplicates node names */
867 if (bdrv_find_node(node_name
)) {
868 error_setg(errp
, "Duplicate node name");
872 /* copy node name into the bs and insert it into the graph list */
873 pstrcpy(bs
->node_name
, sizeof(bs
->node_name
), node_name
);
874 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs
, node_list
);
878 * Common part for opening disk images and files
880 * Removes all processed options from *options.
882 static int bdrv_open_common(BlockDriverState
*bs
, BlockDriverState
*file
,
883 QDict
*options
, int flags
, BlockDriver
*drv
, Error
**errp
)
886 const char *filename
;
887 const char *node_name
= NULL
;
888 Error
*local_err
= NULL
;
891 assert(bs
->file
== NULL
);
892 assert(options
!= NULL
&& bs
->options
!= options
);
895 filename
= file
->filename
;
897 filename
= qdict_get_try_str(options
, "filename");
900 if (drv
->bdrv_needs_filename
&& !filename
) {
901 error_setg(errp
, "The '%s' block driver requires a file name",
906 trace_bdrv_open_common(bs
, filename
?: "", flags
, drv
->format_name
);
908 node_name
= qdict_get_try_str(options
, "node-name");
909 bdrv_assign_node_name(bs
, node_name
, &local_err
);
911 error_propagate(errp
, local_err
);
914 qdict_del(options
, "node-name");
916 /* bdrv_open() with directly using a protocol as drv. This layer is already
917 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
918 * and return immediately. */
919 if (file
!= NULL
&& drv
->bdrv_file_open
) {
924 bs
->open_flags
= flags
;
925 bs
->guest_block_size
= 512;
926 bs
->request_alignment
= 512;
927 bs
->zero_beyond_eof
= true;
928 open_flags
= bdrv_open_flags(bs
, flags
);
929 bs
->read_only
= !(open_flags
& BDRV_O_RDWR
);
931 if (use_bdrv_whitelist
&& !bdrv_is_whitelisted(drv
, bs
->read_only
)) {
933 !bs
->read_only
&& bdrv_is_whitelisted(drv
, true)
934 ? "Driver '%s' can only be used for read-only devices"
935 : "Driver '%s' is not whitelisted",
940 assert(bs
->copy_on_read
== 0); /* bdrv_new() and bdrv_close() make it so */
941 if (flags
& BDRV_O_COPY_ON_READ
) {
942 if (!bs
->read_only
) {
943 bdrv_enable_copy_on_read(bs
);
945 error_setg(errp
, "Can't use copy-on-read on read-only device");
950 if (filename
!= NULL
) {
951 pstrcpy(bs
->filename
, sizeof(bs
->filename
), filename
);
953 bs
->filename
[0] = '\0';
957 bs
->opaque
= g_malloc0(drv
->instance_size
);
959 bs
->enable_write_cache
= !!(flags
& BDRV_O_CACHE_WB
);
961 /* Open the image, either directly or using a protocol */
962 if (drv
->bdrv_file_open
) {
963 assert(file
== NULL
);
964 assert(!drv
->bdrv_needs_filename
|| filename
!= NULL
);
965 ret
= drv
->bdrv_file_open(bs
, options
, open_flags
, &local_err
);
968 error_setg(errp
, "Can't use '%s' as a block driver for the "
969 "protocol level", drv
->format_name
);
974 ret
= drv
->bdrv_open(bs
, options
, open_flags
, &local_err
);
979 error_propagate(errp
, local_err
);
980 } else if (bs
->filename
[0]) {
981 error_setg_errno(errp
, -ret
, "Could not open '%s'", bs
->filename
);
983 error_setg_errno(errp
, -ret
, "Could not open image");
988 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
990 error_setg_errno(errp
, -ret
, "Could not refresh total sector count");
994 bdrv_refresh_limits(bs
);
995 assert(bdrv_opt_mem_align(bs
) != 0);
996 assert((bs
->request_alignment
!= 0) || bs
->sg
);
1008 * Opens a file using a protocol (file, host_device, nbd, ...)
1010 * options is an indirect pointer to a QDict of options to pass to the block
1011 * drivers, or pointer to NULL for an empty set of options. If this function
1012 * takes ownership of the QDict reference, it will set *options to NULL;
1013 * otherwise, it will contain unused/unrecognized options after this function
1014 * returns. Then, the caller is responsible for freeing it. If it intends to
1015 * reuse the QDict, QINCREF() should be called beforehand.
1017 static int bdrv_file_open(BlockDriverState
*bs
, const char *filename
,
1018 QDict
**options
, int flags
, Error
**errp
)
1021 const char *drvname
;
1022 bool parse_filename
= false;
1023 Error
*local_err
= NULL
;
1026 /* Fetch the file name from the options QDict if necessary */
1028 filename
= qdict_get_try_str(*options
, "filename");
1029 } else if (filename
&& !qdict_haskey(*options
, "filename")) {
1030 qdict_put(*options
, "filename", qstring_from_str(filename
));
1031 parse_filename
= true;
1033 error_setg(errp
, "Can't specify 'file' and 'filename' options at the "
1039 /* Find the right block driver */
1040 drvname
= qdict_get_try_str(*options
, "driver");
1042 drv
= bdrv_find_format(drvname
);
1044 error_setg(errp
, "Unknown driver '%s'", drvname
);
1046 qdict_del(*options
, "driver");
1047 } else if (filename
) {
1048 drv
= bdrv_find_protocol(filename
, parse_filename
);
1050 error_setg(errp
, "Unknown protocol");
1053 error_setg(errp
, "Must specify either driver or file");
1058 /* errp has been set already */
1063 /* Parse the filename and open it */
1064 if (drv
->bdrv_parse_filename
&& parse_filename
) {
1065 drv
->bdrv_parse_filename(filename
, *options
, &local_err
);
1067 error_propagate(errp
, local_err
);
1072 if (!drv
->bdrv_needs_filename
) {
1073 qdict_del(*options
, "filename");
1075 filename
= qdict_get_str(*options
, "filename");
1079 if (!drv
->bdrv_file_open
) {
1080 ret
= bdrv_open(&bs
, filename
, NULL
, *options
, flags
, drv
, &local_err
);
1083 ret
= bdrv_open_common(bs
, NULL
, *options
, flags
, drv
, &local_err
);
1086 error_propagate(errp
, local_err
);
1097 void bdrv_set_backing_hd(BlockDriverState
*bs
, BlockDriverState
*backing_hd
)
1100 if (bs
->backing_hd
) {
1101 assert(bs
->backing_blocker
);
1102 bdrv_op_unblock_all(bs
->backing_hd
, bs
->backing_blocker
);
1103 } else if (backing_hd
) {
1104 error_setg(&bs
->backing_blocker
,
1105 "device is used as backing hd of '%s'",
1109 bs
->backing_hd
= backing_hd
;
1111 error_free(bs
->backing_blocker
);
1112 bs
->backing_blocker
= NULL
;
1115 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
1116 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_hd
->filename
);
1117 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
),
1118 backing_hd
->drv
? backing_hd
->drv
->format_name
: "");
1120 bdrv_op_block_all(bs
->backing_hd
, bs
->backing_blocker
);
1121 /* Otherwise we won't be able to commit due to check in bdrv_commit */
1122 bdrv_op_unblock(bs
->backing_hd
, BLOCK_OP_TYPE_COMMIT
,
1123 bs
->backing_blocker
);
1125 bdrv_refresh_limits(bs
);
1129 * Opens the backing file for a BlockDriverState if not yet open
1131 * options is a QDict of options to pass to the block drivers, or NULL for an
1132 * empty set of options. The reference to the QDict is transferred to this
1133 * function (even on failure), so if the caller intends to reuse the dictionary,
1134 * it needs to use QINCREF() before calling bdrv_file_open.
1136 int bdrv_open_backing_file(BlockDriverState
*bs
, QDict
*options
, Error
**errp
)
1138 char *backing_filename
= g_malloc0(PATH_MAX
);
1140 BlockDriver
*back_drv
= NULL
;
1141 BlockDriverState
*backing_hd
;
1142 Error
*local_err
= NULL
;
1144 if (bs
->backing_hd
!= NULL
) {
1149 /* NULL means an empty set of options */
1150 if (options
== NULL
) {
1151 options
= qdict_new();
1154 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
1155 if (qdict_haskey(options
, "file.filename")) {
1156 backing_filename
[0] = '\0';
1157 } else if (bs
->backing_file
[0] == '\0' && qdict_size(options
) == 0) {
1161 bdrv_get_full_backing_filename(bs
, backing_filename
, PATH_MAX
);
1164 backing_hd
= bdrv_new("", errp
);
1166 if (bs
->backing_format
[0] != '\0') {
1167 back_drv
= bdrv_find_format(bs
->backing_format
);
1170 assert(bs
->backing_hd
== NULL
);
1171 ret
= bdrv_open(&backing_hd
,
1172 *backing_filename
? backing_filename
: NULL
, NULL
, options
,
1173 bdrv_backing_flags(bs
->open_flags
), back_drv
, &local_err
);
1175 bdrv_unref(backing_hd
);
1177 bs
->open_flags
|= BDRV_O_NO_BACKING
;
1178 error_setg(errp
, "Could not open backing file: %s",
1179 error_get_pretty(local_err
));
1180 error_free(local_err
);
1183 bdrv_set_backing_hd(bs
, backing_hd
);
1186 g_free(backing_filename
);
1191 * Opens a disk image whose options are given as BlockdevRef in another block
1194 * If allow_none is true, no image will be opened if filename is false and no
1195 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1197 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1198 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1199 * itself, all options starting with "${bdref_key}." are considered part of the
1202 * The BlockdevRef will be removed from the options QDict.
1204 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1206 int bdrv_open_image(BlockDriverState
**pbs
, const char *filename
,
1207 QDict
*options
, const char *bdref_key
, int flags
,
1208 bool allow_none
, Error
**errp
)
1210 QDict
*image_options
;
1212 char *bdref_key_dot
;
1213 const char *reference
;
1216 assert(*pbs
== NULL
);
1218 bdref_key_dot
= g_strdup_printf("%s.", bdref_key
);
1219 qdict_extract_subqdict(options
, &image_options
, bdref_key_dot
);
1220 g_free(bdref_key_dot
);
1222 reference
= qdict_get_try_str(options
, bdref_key
);
1223 if (!filename
&& !reference
&& !qdict_size(image_options
)) {
1227 error_setg(errp
, "A block device must be specified for \"%s\"",
1231 QDECREF(image_options
);
1235 ret
= bdrv_open(pbs
, filename
, reference
, image_options
, flags
, NULL
, errp
);
1238 qdict_del(options
, bdref_key
);
1242 void bdrv_append_temp_snapshot(BlockDriverState
*bs
, int flags
, Error
**errp
)
1244 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1245 char *tmp_filename
= g_malloc0(PATH_MAX
+ 1);
1247 BlockDriver
*bdrv_qcow2
;
1248 QEMUOptionParameter
*create_options
;
1249 QDict
*snapshot_options
;
1250 BlockDriverState
*bs_snapshot
;
1254 /* if snapshot, we create a temporary backing file and open it
1255 instead of opening 'filename' directly */
1257 /* Get the required size from the image */
1258 total_size
= bdrv_getlength(bs
);
1259 if (total_size
< 0) {
1260 error_setg_errno(errp
, -total_size
, "Could not get image size");
1263 total_size
&= BDRV_SECTOR_MASK
;
1265 /* Create the temporary image */
1266 ret
= get_tmp_filename(tmp_filename
, PATH_MAX
+ 1);
1268 error_setg_errno(errp
, -ret
, "Could not get temporary filename");
1272 bdrv_qcow2
= bdrv_find_format("qcow2");
1273 create_options
= parse_option_parameters("", bdrv_qcow2
->create_options
,
1276 set_option_parameter_int(create_options
, BLOCK_OPT_SIZE
, total_size
);
1278 ret
= bdrv_create(bdrv_qcow2
, tmp_filename
, create_options
, &local_err
);
1279 free_option_parameters(create_options
);
1281 error_setg_errno(errp
, -ret
, "Could not create temporary overlay "
1282 "'%s': %s", tmp_filename
,
1283 error_get_pretty(local_err
));
1284 error_free(local_err
);
1288 /* Prepare a new options QDict for the temporary file */
1289 snapshot_options
= qdict_new();
1290 qdict_put(snapshot_options
, "file.driver",
1291 qstring_from_str("file"));
1292 qdict_put(snapshot_options
, "file.filename",
1293 qstring_from_str(tmp_filename
));
1295 bs_snapshot
= bdrv_new("", &error_abort
);
1297 ret
= bdrv_open(&bs_snapshot
, NULL
, NULL
, snapshot_options
,
1298 flags
, bdrv_qcow2
, &local_err
);
1300 error_propagate(errp
, local_err
);
1304 bdrv_append(bs_snapshot
, bs
);
1307 g_free(tmp_filename
);
1310 static QDict
*parse_json_filename(const char *filename
, Error
**errp
)
1312 QObject
*options_obj
;
1316 ret
= strstart(filename
, "json:", &filename
);
1319 options_obj
= qobject_from_json(filename
);
1321 error_setg(errp
, "Could not parse the JSON options");
1325 if (qobject_type(options_obj
) != QTYPE_QDICT
) {
1326 qobject_decref(options_obj
);
1327 error_setg(errp
, "Invalid JSON object given");
1331 options
= qobject_to_qdict(options_obj
);
1332 qdict_flatten(options
);
1338 * Opens a disk image (raw, qcow2, vmdk, ...)
1340 * options is a QDict of options to pass to the block drivers, or NULL for an
1341 * empty set of options. The reference to the QDict belongs to the block layer
1342 * after the call (even on failure), so if the caller intends to reuse the
1343 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1345 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1346 * If it is not NULL, the referenced BDS will be reused.
1348 * The reference parameter may be used to specify an existing block device which
1349 * should be opened. If specified, neither options nor a filename may be given,
1350 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1352 int bdrv_open(BlockDriverState
**pbs
, const char *filename
,
1353 const char *reference
, QDict
*options
, int flags
,
1354 BlockDriver
*drv
, Error
**errp
)
1357 BlockDriverState
*file
= NULL
, *bs
;
1358 const char *drvname
;
1359 Error
*local_err
= NULL
;
1360 int snapshot_flags
= 0;
1365 bool options_non_empty
= options
? qdict_size(options
) : false;
1369 error_setg(errp
, "Cannot reuse an existing BDS when referencing "
1370 "another block device");
1374 if (filename
|| options_non_empty
) {
1375 error_setg(errp
, "Cannot reference an existing block device with "
1376 "additional options or a new filename");
1380 bs
= bdrv_lookup_bs(reference
, reference
, errp
);
1392 bs
= bdrv_new("", &error_abort
);
1395 /* NULL means an empty set of options */
1396 if (options
== NULL
) {
1397 options
= qdict_new();
1400 if (filename
&& g_str_has_prefix(filename
, "json:")) {
1401 QDict
*json_options
= parse_json_filename(filename
, &local_err
);
1407 /* Options given in the filename have lower priority than options
1408 * specified directly */
1409 qdict_join(options
, json_options
, false);
1410 QDECREF(json_options
);
1414 bs
->options
= options
;
1415 options
= qdict_clone_shallow(options
);
1417 if (flags
& BDRV_O_PROTOCOL
) {
1419 ret
= bdrv_file_open(bs
, filename
, &options
, flags
& ~BDRV_O_PROTOCOL
,
1424 } else if (bs
->drv
) {
1425 goto close_and_fail
;
1431 /* Open image file without format layer */
1432 if (flags
& BDRV_O_RDWR
) {
1433 flags
|= BDRV_O_ALLOW_RDWR
;
1435 if (flags
& BDRV_O_SNAPSHOT
) {
1436 snapshot_flags
= bdrv_temp_snapshot_flags(flags
);
1437 flags
= bdrv_backing_flags(flags
);
1440 assert(file
== NULL
);
1441 ret
= bdrv_open_image(&file
, filename
, options
, "file",
1442 bdrv_inherited_flags(flags
),
1448 /* Find the right image format driver */
1449 drvname
= qdict_get_try_str(options
, "driver");
1451 drv
= bdrv_find_format(drvname
);
1452 qdict_del(options
, "driver");
1454 error_setg(errp
, "Invalid driver: '%s'", drvname
);
1462 ret
= find_image_format(file
, filename
, &drv
, &local_err
);
1464 error_setg(errp
, "Must specify either driver or file");
1474 /* Open the image */
1475 ret
= bdrv_open_common(bs
, file
, options
, flags
, drv
, &local_err
);
1480 if (file
&& (bs
->file
!= file
)) {
1485 /* If there is a backing file, use it */
1486 if ((flags
& BDRV_O_NO_BACKING
) == 0) {
1487 QDict
*backing_options
;
1489 qdict_extract_subqdict(options
, &backing_options
, "backing.");
1490 ret
= bdrv_open_backing_file(bs
, backing_options
, &local_err
);
1492 goto close_and_fail
;
1496 /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1497 * temporary snapshot afterwards. */
1498 if (snapshot_flags
) {
1499 bdrv_append_temp_snapshot(bs
, snapshot_flags
, &local_err
);
1501 error_propagate(errp
, local_err
);
1502 goto close_and_fail
;
1508 /* Check if any unknown options were used */
1509 if (options
&& (qdict_size(options
) != 0)) {
1510 const QDictEntry
*entry
= qdict_first(options
);
1511 if (flags
& BDRV_O_PROTOCOL
) {
1512 error_setg(errp
, "Block protocol '%s' doesn't support the option "
1513 "'%s'", drv
->format_name
, entry
->key
);
1515 error_setg(errp
, "Block format '%s' used by device '%s' doesn't "
1516 "support the option '%s'", drv
->format_name
,
1517 bs
->device_name
, entry
->key
);
1521 goto close_and_fail
;
1524 if (!bdrv_key_required(bs
)) {
1525 bdrv_dev_change_media_cb(bs
, true);
1526 } else if (!runstate_check(RUN_STATE_PRELAUNCH
)
1527 && !runstate_check(RUN_STATE_INMIGRATE
)
1528 && !runstate_check(RUN_STATE_PAUSED
)) { /* HACK */
1530 "Guest must be stopped for opening of encrypted image");
1532 goto close_and_fail
;
1543 QDECREF(bs
->options
);
1547 /* If *pbs is NULL, a new BDS has been created in this function and
1548 needs to be freed now. Otherwise, it does not need to be closed,
1549 since it has not really been opened yet. */
1553 error_propagate(errp
, local_err
);
1558 /* See fail path, but now the BDS has to be always closed */
1566 error_propagate(errp
, local_err
);
1571 typedef struct BlockReopenQueueEntry
{
1573 BDRVReopenState state
;
1574 QSIMPLEQ_ENTRY(BlockReopenQueueEntry
) entry
;
1575 } BlockReopenQueueEntry
;
1578 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1579 * reopen of multiple devices.
1581 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1582 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1583 * be created and initialized. This newly created BlockReopenQueue should be
1584 * passed back in for subsequent calls that are intended to be of the same
1587 * bs is the BlockDriverState to add to the reopen queue.
1589 * flags contains the open flags for the associated bs
1591 * returns a pointer to bs_queue, which is either the newly allocated
1592 * bs_queue, or the existing bs_queue being used.
1595 BlockReopenQueue
*bdrv_reopen_queue(BlockReopenQueue
*bs_queue
,
1596 BlockDriverState
*bs
, int flags
)
1600 BlockReopenQueueEntry
*bs_entry
;
1601 if (bs_queue
== NULL
) {
1602 bs_queue
= g_new0(BlockReopenQueue
, 1);
1603 QSIMPLEQ_INIT(bs_queue
);
1606 /* bdrv_open() masks this flag out */
1607 flags
&= ~BDRV_O_PROTOCOL
;
1610 bdrv_reopen_queue(bs_queue
, bs
->file
, bdrv_inherited_flags(flags
));
1613 bs_entry
= g_new0(BlockReopenQueueEntry
, 1);
1614 QSIMPLEQ_INSERT_TAIL(bs_queue
, bs_entry
, entry
);
1616 bs_entry
->state
.bs
= bs
;
1617 bs_entry
->state
.flags
= flags
;
1623 * Reopen multiple BlockDriverStates atomically & transactionally.
1625 * The queue passed in (bs_queue) must have been built up previous
1626 * via bdrv_reopen_queue().
1628 * Reopens all BDS specified in the queue, with the appropriate
1629 * flags. All devices are prepared for reopen, and failure of any
1630 * device will cause all device changes to be abandonded, and intermediate
1633 * If all devices prepare successfully, then the changes are committed
1637 int bdrv_reopen_multiple(BlockReopenQueue
*bs_queue
, Error
**errp
)
1640 BlockReopenQueueEntry
*bs_entry
, *next
;
1641 Error
*local_err
= NULL
;
1643 assert(bs_queue
!= NULL
);
1647 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1648 if (bdrv_reopen_prepare(&bs_entry
->state
, bs_queue
, &local_err
)) {
1649 error_propagate(errp
, local_err
);
1652 bs_entry
->prepared
= true;
1655 /* If we reach this point, we have success and just need to apply the
1658 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1659 bdrv_reopen_commit(&bs_entry
->state
);
1665 QSIMPLEQ_FOREACH_SAFE(bs_entry
, bs_queue
, entry
, next
) {
1666 if (ret
&& bs_entry
->prepared
) {
1667 bdrv_reopen_abort(&bs_entry
->state
);
1676 /* Reopen a single BlockDriverState with the specified flags. */
1677 int bdrv_reopen(BlockDriverState
*bs
, int bdrv_flags
, Error
**errp
)
1680 Error
*local_err
= NULL
;
1681 BlockReopenQueue
*queue
= bdrv_reopen_queue(NULL
, bs
, bdrv_flags
);
1683 ret
= bdrv_reopen_multiple(queue
, &local_err
);
1684 if (local_err
!= NULL
) {
1685 error_propagate(errp
, local_err
);
1692 * Prepares a BlockDriverState for reopen. All changes are staged in the
1693 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1694 * the block driver layer .bdrv_reopen_prepare()
1696 * bs is the BlockDriverState to reopen
1697 * flags are the new open flags
1698 * queue is the reopen queue
1700 * Returns 0 on success, non-zero on error. On error errp will be set
1703 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1704 * It is the responsibility of the caller to then call the abort() or
1705 * commit() for any other BDS that have been left in a prepare() state
1708 int bdrv_reopen_prepare(BDRVReopenState
*reopen_state
, BlockReopenQueue
*queue
,
1712 Error
*local_err
= NULL
;
1715 assert(reopen_state
!= NULL
);
1716 assert(reopen_state
->bs
->drv
!= NULL
);
1717 drv
= reopen_state
->bs
->drv
;
1719 /* if we are to stay read-only, do not allow permission change
1721 if (!(reopen_state
->bs
->open_flags
& BDRV_O_ALLOW_RDWR
) &&
1722 reopen_state
->flags
& BDRV_O_RDWR
) {
1723 error_set(errp
, QERR_DEVICE_IS_READ_ONLY
,
1724 reopen_state
->bs
->device_name
);
1729 ret
= bdrv_flush(reopen_state
->bs
);
1731 error_set(errp
, ERROR_CLASS_GENERIC_ERROR
, "Error (%s) flushing drive",
1736 if (drv
->bdrv_reopen_prepare
) {
1737 ret
= drv
->bdrv_reopen_prepare(reopen_state
, queue
, &local_err
);
1739 if (local_err
!= NULL
) {
1740 error_propagate(errp
, local_err
);
1742 error_setg(errp
, "failed while preparing to reopen image '%s'",
1743 reopen_state
->bs
->filename
);
1748 /* It is currently mandatory to have a bdrv_reopen_prepare()
1749 * handler for each supported drv. */
1750 error_set(errp
, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED
,
1751 drv
->format_name
, reopen_state
->bs
->device_name
,
1752 "reopening of file");
1764 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1765 * makes them final by swapping the staging BlockDriverState contents into
1766 * the active BlockDriverState contents.
1768 void bdrv_reopen_commit(BDRVReopenState
*reopen_state
)
1772 assert(reopen_state
!= NULL
);
1773 drv
= reopen_state
->bs
->drv
;
1774 assert(drv
!= NULL
);
1776 /* If there are any driver level actions to take */
1777 if (drv
->bdrv_reopen_commit
) {
1778 drv
->bdrv_reopen_commit(reopen_state
);
1781 /* set BDS specific flags now */
1782 reopen_state
->bs
->open_flags
= reopen_state
->flags
;
1783 reopen_state
->bs
->enable_write_cache
= !!(reopen_state
->flags
&
1785 reopen_state
->bs
->read_only
= !(reopen_state
->flags
& BDRV_O_RDWR
);
1787 bdrv_refresh_limits(reopen_state
->bs
);
1791 * Abort the reopen, and delete and free the staged changes in
1794 void bdrv_reopen_abort(BDRVReopenState
*reopen_state
)
1798 assert(reopen_state
!= NULL
);
1799 drv
= reopen_state
->bs
->drv
;
1800 assert(drv
!= NULL
);
1802 if (drv
->bdrv_reopen_abort
) {
1803 drv
->bdrv_reopen_abort(reopen_state
);
1808 void bdrv_close(BlockDriverState
*bs
)
1811 block_job_cancel_sync(bs
->job
);
1813 bdrv_drain_all(); /* complete I/O */
1815 bdrv_drain_all(); /* in case flush left pending I/O */
1816 notifier_list_notify(&bs
->close_notifiers
, bs
);
1819 if (bs
->backing_hd
) {
1820 BlockDriverState
*backing_hd
= bs
->backing_hd
;
1821 bdrv_set_backing_hd(bs
, NULL
);
1822 bdrv_unref(backing_hd
);
1824 bs
->drv
->bdrv_close(bs
);
1828 bs
->copy_on_read
= 0;
1829 bs
->backing_file
[0] = '\0';
1830 bs
->backing_format
[0] = '\0';
1831 bs
->total_sectors
= 0;
1836 bs
->zero_beyond_eof
= false;
1837 QDECREF(bs
->options
);
1840 if (bs
->file
!= NULL
) {
1841 bdrv_unref(bs
->file
);
1846 bdrv_dev_change_media_cb(bs
, false);
1848 /*throttling disk I/O limits*/
1849 if (bs
->io_limits_enabled
) {
1850 bdrv_io_limits_disable(bs
);
1854 void bdrv_close_all(void)
1856 BlockDriverState
*bs
;
1858 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
1863 /* Check if any requests are in-flight (including throttled requests) */
1864 static bool bdrv_requests_pending(BlockDriverState
*bs
)
1866 if (!QLIST_EMPTY(&bs
->tracked_requests
)) {
1869 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[0])) {
1872 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[1])) {
1875 if (bs
->file
&& bdrv_requests_pending(bs
->file
)) {
1878 if (bs
->backing_hd
&& bdrv_requests_pending(bs
->backing_hd
)) {
1884 static bool bdrv_requests_pending_all(void)
1886 BlockDriverState
*bs
;
1887 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
1888 if (bdrv_requests_pending(bs
)) {
1896 * Wait for pending requests to complete across all BlockDriverStates
1898 * This function does not flush data to disk, use bdrv_flush_all() for that
1899 * after calling this function.
1901 * Note that completion of an asynchronous I/O operation can trigger any
1902 * number of other I/O operations on other devices---for example a coroutine
1903 * can be arbitrarily complex and a constant flow of I/O can come until the
1904 * coroutine is complete. Because of this, it is not possible to have a
1905 * function to drain a single device's I/O queue.
1907 void bdrv_drain_all(void)
1909 /* Always run first iteration so any pending completion BHs run */
1911 BlockDriverState
*bs
;
1914 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
1915 bdrv_start_throttled_reqs(bs
);
1918 busy
= bdrv_requests_pending_all();
1919 busy
|= aio_poll(qemu_get_aio_context(), busy
);
1923 /* make a BlockDriverState anonymous by removing from bdrv_state and
1924 * graph_bdrv_state list.
1925 Also, NULL terminate the device_name to prevent double remove */
1926 void bdrv_make_anon(BlockDriverState
*bs
)
1928 if (bs
->device_name
[0] != '\0') {
1929 QTAILQ_REMOVE(&bdrv_states
, bs
, device_list
);
1931 bs
->device_name
[0] = '\0';
1932 if (bs
->node_name
[0] != '\0') {
1933 QTAILQ_REMOVE(&graph_bdrv_states
, bs
, node_list
);
1935 bs
->node_name
[0] = '\0';
1938 static void bdrv_rebind(BlockDriverState
*bs
)
1940 if (bs
->drv
&& bs
->drv
->bdrv_rebind
) {
1941 bs
->drv
->bdrv_rebind(bs
);
1945 static void bdrv_move_feature_fields(BlockDriverState
*bs_dest
,
1946 BlockDriverState
*bs_src
)
1948 /* move some fields that need to stay attached to the device */
1951 bs_dest
->dev_ops
= bs_src
->dev_ops
;
1952 bs_dest
->dev_opaque
= bs_src
->dev_opaque
;
1953 bs_dest
->dev
= bs_src
->dev
;
1954 bs_dest
->guest_block_size
= bs_src
->guest_block_size
;
1955 bs_dest
->copy_on_read
= bs_src
->copy_on_read
;
1957 bs_dest
->enable_write_cache
= bs_src
->enable_write_cache
;
1959 /* i/o throttled req */
1960 memcpy(&bs_dest
->throttle_state
,
1961 &bs_src
->throttle_state
,
1962 sizeof(ThrottleState
));
1963 bs_dest
->throttled_reqs
[0] = bs_src
->throttled_reqs
[0];
1964 bs_dest
->throttled_reqs
[1] = bs_src
->throttled_reqs
[1];
1965 bs_dest
->io_limits_enabled
= bs_src
->io_limits_enabled
;
1968 bs_dest
->on_read_error
= bs_src
->on_read_error
;
1969 bs_dest
->on_write_error
= bs_src
->on_write_error
;
1972 bs_dest
->iostatus_enabled
= bs_src
->iostatus_enabled
;
1973 bs_dest
->iostatus
= bs_src
->iostatus
;
1976 bs_dest
->dirty_bitmaps
= bs_src
->dirty_bitmaps
;
1978 /* reference count */
1979 bs_dest
->refcnt
= bs_src
->refcnt
;
1982 bs_dest
->job
= bs_src
->job
;
1984 /* keep the same entry in bdrv_states */
1985 pstrcpy(bs_dest
->device_name
, sizeof(bs_dest
->device_name
),
1986 bs_src
->device_name
);
1987 bs_dest
->device_list
= bs_src
->device_list
;
1988 memcpy(bs_dest
->op_blockers
, bs_src
->op_blockers
,
1989 sizeof(bs_dest
->op_blockers
));
1993 * Swap bs contents for two image chains while they are live,
1994 * while keeping required fields on the BlockDriverState that is
1995 * actually attached to a device.
1997 * This will modify the BlockDriverState fields, and swap contents
1998 * between bs_new and bs_old. Both bs_new and bs_old are modified.
2000 * bs_new is required to be anonymous.
2002 * This function does not create any image files.
2004 void bdrv_swap(BlockDriverState
*bs_new
, BlockDriverState
*bs_old
)
2006 BlockDriverState tmp
;
2008 /* The code needs to swap the node_name but simply swapping node_list won't
2009 * work so first remove the nodes from the graph list, do the swap then
2010 * insert them back if needed.
2012 if (bs_new
->node_name
[0] != '\0') {
2013 QTAILQ_REMOVE(&graph_bdrv_states
, bs_new
, node_list
);
2015 if (bs_old
->node_name
[0] != '\0') {
2016 QTAILQ_REMOVE(&graph_bdrv_states
, bs_old
, node_list
);
2019 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
2020 assert(bs_new
->device_name
[0] == '\0');
2021 assert(QLIST_EMPTY(&bs_new
->dirty_bitmaps
));
2022 assert(bs_new
->job
== NULL
);
2023 assert(bs_new
->dev
== NULL
);
2024 assert(bs_new
->io_limits_enabled
== false);
2025 assert(!throttle_have_timer(&bs_new
->throttle_state
));
2031 /* there are some fields that should not be swapped, move them back */
2032 bdrv_move_feature_fields(&tmp
, bs_old
);
2033 bdrv_move_feature_fields(bs_old
, bs_new
);
2034 bdrv_move_feature_fields(bs_new
, &tmp
);
2036 /* bs_new shouldn't be in bdrv_states even after the swap! */
2037 assert(bs_new
->device_name
[0] == '\0');
2039 /* Check a few fields that should remain attached to the device */
2040 assert(bs_new
->dev
== NULL
);
2041 assert(bs_new
->job
== NULL
);
2042 assert(bs_new
->io_limits_enabled
== false);
2043 assert(!throttle_have_timer(&bs_new
->throttle_state
));
2045 /* insert the nodes back into the graph node list if needed */
2046 if (bs_new
->node_name
[0] != '\0') {
2047 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs_new
, node_list
);
2049 if (bs_old
->node_name
[0] != '\0') {
2050 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs_old
, node_list
);
2053 bdrv_rebind(bs_new
);
2054 bdrv_rebind(bs_old
);
2058 * Add new bs contents at the top of an image chain while the chain is
2059 * live, while keeping required fields on the top layer.
2061 * This will modify the BlockDriverState fields, and swap contents
2062 * between bs_new and bs_top. Both bs_new and bs_top are modified.
2064 * bs_new is required to be anonymous.
2066 * This function does not create any image files.
2068 void bdrv_append(BlockDriverState
*bs_new
, BlockDriverState
*bs_top
)
2070 bdrv_swap(bs_new
, bs_top
);
2072 /* The contents of 'tmp' will become bs_top, as we are
2073 * swapping bs_new and bs_top contents. */
2074 bdrv_set_backing_hd(bs_top
, bs_new
);
2077 static void bdrv_delete(BlockDriverState
*bs
)
2081 assert(bdrv_op_blocker_is_empty(bs
));
2082 assert(!bs
->refcnt
);
2083 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
2087 /* remove from list, if necessary */
2093 int bdrv_attach_dev(BlockDriverState
*bs
, void *dev
)
2094 /* TODO change to DeviceState *dev when all users are qdevified */
2100 bdrv_iostatus_reset(bs
);
2104 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2105 void bdrv_attach_dev_nofail(BlockDriverState
*bs
, void *dev
)
2107 if (bdrv_attach_dev(bs
, dev
) < 0) {
2112 void bdrv_detach_dev(BlockDriverState
*bs
, void *dev
)
2113 /* TODO change to DeviceState *dev when all users are qdevified */
2115 assert(bs
->dev
== dev
);
2118 bs
->dev_opaque
= NULL
;
2119 bs
->guest_block_size
= 512;
2122 /* TODO change to return DeviceState * when all users are qdevified */
2123 void *bdrv_get_attached_dev(BlockDriverState
*bs
)
2128 void bdrv_set_dev_ops(BlockDriverState
*bs
, const BlockDevOps
*ops
,
2132 bs
->dev_opaque
= opaque
;
2135 void bdrv_emit_qmp_error_event(const BlockDriverState
*bdrv
,
2136 enum MonitorEvent ev
,
2137 BlockErrorAction action
, bool is_read
)
2140 const char *action_str
;
2143 case BDRV_ACTION_REPORT
:
2144 action_str
= "report";
2146 case BDRV_ACTION_IGNORE
:
2147 action_str
= "ignore";
2149 case BDRV_ACTION_STOP
:
2150 action_str
= "stop";
2156 data
= qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
2159 is_read
? "read" : "write");
2160 monitor_protocol_event(ev
, data
);
2162 qobject_decref(data
);
2165 static void bdrv_emit_qmp_eject_event(BlockDriverState
*bs
, bool ejected
)
2169 data
= qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
2170 bdrv_get_device_name(bs
), ejected
);
2171 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED
, data
);
2173 qobject_decref(data
);
2176 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
)
2178 if (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
) {
2179 bool tray_was_closed
= !bdrv_dev_is_tray_open(bs
);
2180 bs
->dev_ops
->change_media_cb(bs
->dev_opaque
, load
);
2181 if (tray_was_closed
) {
2183 bdrv_emit_qmp_eject_event(bs
, true);
2187 bdrv_emit_qmp_eject_event(bs
, false);
2192 bool bdrv_dev_has_removable_media(BlockDriverState
*bs
)
2194 return !bs
->dev
|| (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
);
2197 void bdrv_dev_eject_request(BlockDriverState
*bs
, bool force
)
2199 if (bs
->dev_ops
&& bs
->dev_ops
->eject_request_cb
) {
2200 bs
->dev_ops
->eject_request_cb(bs
->dev_opaque
, force
);
2204 bool bdrv_dev_is_tray_open(BlockDriverState
*bs
)
2206 if (bs
->dev_ops
&& bs
->dev_ops
->is_tray_open
) {
2207 return bs
->dev_ops
->is_tray_open(bs
->dev_opaque
);
2212 static void bdrv_dev_resize_cb(BlockDriverState
*bs
)
2214 if (bs
->dev_ops
&& bs
->dev_ops
->resize_cb
) {
2215 bs
->dev_ops
->resize_cb(bs
->dev_opaque
);
2219 bool bdrv_dev_is_medium_locked(BlockDriverState
*bs
)
2221 if (bs
->dev_ops
&& bs
->dev_ops
->is_medium_locked
) {
2222 return bs
->dev_ops
->is_medium_locked(bs
->dev_opaque
);
2228 * Run consistency checks on an image
2230 * Returns 0 if the check could be completed (it doesn't mean that the image is
2231 * free of errors) or -errno when an internal error occurred. The results of the
2232 * check are stored in res.
2234 int bdrv_check(BlockDriverState
*bs
, BdrvCheckResult
*res
, BdrvCheckMode fix
)
2236 if (bs
->drv
->bdrv_check
== NULL
) {
2240 memset(res
, 0, sizeof(*res
));
2241 return bs
->drv
->bdrv_check(bs
, res
, fix
);
2244 #define COMMIT_BUF_SECTORS 2048
2246 /* commit COW file into the raw image */
2247 int bdrv_commit(BlockDriverState
*bs
)
2249 BlockDriver
*drv
= bs
->drv
;
2250 int64_t sector
, total_sectors
, length
, backing_length
;
2251 int n
, ro
, open_flags
;
2253 uint8_t *buf
= NULL
;
2254 char filename
[PATH_MAX
];
2259 if (!bs
->backing_hd
) {
2263 if (bdrv_op_is_blocked(bs
, BLOCK_OP_TYPE_COMMIT
, NULL
) ||
2264 bdrv_op_is_blocked(bs
->backing_hd
, BLOCK_OP_TYPE_COMMIT
, NULL
)) {
2268 ro
= bs
->backing_hd
->read_only
;
2269 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2270 pstrcpy(filename
, sizeof(filename
), bs
->backing_hd
->filename
);
2271 open_flags
= bs
->backing_hd
->open_flags
;
2274 if (bdrv_reopen(bs
->backing_hd
, open_flags
| BDRV_O_RDWR
, NULL
)) {
2279 length
= bdrv_getlength(bs
);
2285 backing_length
= bdrv_getlength(bs
->backing_hd
);
2286 if (backing_length
< 0) {
2287 ret
= backing_length
;
2291 /* If our top snapshot is larger than the backing file image,
2292 * grow the backing file image if possible. If not possible,
2293 * we must return an error */
2294 if (length
> backing_length
) {
2295 ret
= bdrv_truncate(bs
->backing_hd
, length
);
2301 total_sectors
= length
>> BDRV_SECTOR_BITS
;
2302 buf
= g_malloc(COMMIT_BUF_SECTORS
* BDRV_SECTOR_SIZE
);
2304 for (sector
= 0; sector
< total_sectors
; sector
+= n
) {
2305 ret
= bdrv_is_allocated(bs
, sector
, COMMIT_BUF_SECTORS
, &n
);
2310 ret
= bdrv_read(bs
, sector
, buf
, n
);
2315 ret
= bdrv_write(bs
->backing_hd
, sector
, buf
, n
);
2322 if (drv
->bdrv_make_empty
) {
2323 ret
= drv
->bdrv_make_empty(bs
);
2331 * Make sure all data we wrote to the backing device is actually
2334 if (bs
->backing_hd
) {
2335 bdrv_flush(bs
->backing_hd
);
2343 /* ignoring error return here */
2344 bdrv_reopen(bs
->backing_hd
, open_flags
& ~BDRV_O_RDWR
, NULL
);
2350 int bdrv_commit_all(void)
2352 BlockDriverState
*bs
;
2354 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
2355 if (bs
->drv
&& bs
->backing_hd
) {
2356 int ret
= bdrv_commit(bs
);
2366 * Remove an active request from the tracked requests list
2368 * This function should be called when a tracked request is completing.
2370 static void tracked_request_end(BdrvTrackedRequest
*req
)
2372 if (req
->serialising
) {
2373 req
->bs
->serialising_in_flight
--;
2376 QLIST_REMOVE(req
, list
);
2377 qemu_co_queue_restart_all(&req
->wait_queue
);
2381 * Add an active request to the tracked requests list
2383 static void tracked_request_begin(BdrvTrackedRequest
*req
,
2384 BlockDriverState
*bs
,
2386 unsigned int bytes
, bool is_write
)
2388 *req
= (BdrvTrackedRequest
){
2392 .is_write
= is_write
,
2393 .co
= qemu_coroutine_self(),
2394 .serialising
= false,
2395 .overlap_offset
= offset
,
2396 .overlap_bytes
= bytes
,
2399 qemu_co_queue_init(&req
->wait_queue
);
2401 QLIST_INSERT_HEAD(&bs
->tracked_requests
, req
, list
);
2404 static void mark_request_serialising(BdrvTrackedRequest
*req
, uint64_t align
)
2406 int64_t overlap_offset
= req
->offset
& ~(align
- 1);
2407 unsigned int overlap_bytes
= ROUND_UP(req
->offset
+ req
->bytes
, align
)
2410 if (!req
->serialising
) {
2411 req
->bs
->serialising_in_flight
++;
2412 req
->serialising
= true;
2415 req
->overlap_offset
= MIN(req
->overlap_offset
, overlap_offset
);
2416 req
->overlap_bytes
= MAX(req
->overlap_bytes
, overlap_bytes
);
2420 * Round a region to cluster boundaries
2422 void bdrv_round_to_clusters(BlockDriverState
*bs
,
2423 int64_t sector_num
, int nb_sectors
,
2424 int64_t *cluster_sector_num
,
2425 int *cluster_nb_sectors
)
2427 BlockDriverInfo bdi
;
2429 if (bdrv_get_info(bs
, &bdi
) < 0 || bdi
.cluster_size
== 0) {
2430 *cluster_sector_num
= sector_num
;
2431 *cluster_nb_sectors
= nb_sectors
;
2433 int64_t c
= bdi
.cluster_size
/ BDRV_SECTOR_SIZE
;
2434 *cluster_sector_num
= QEMU_ALIGN_DOWN(sector_num
, c
);
2435 *cluster_nb_sectors
= QEMU_ALIGN_UP(sector_num
- *cluster_sector_num
+
2440 static int bdrv_get_cluster_size(BlockDriverState
*bs
)
2442 BlockDriverInfo bdi
;
2445 ret
= bdrv_get_info(bs
, &bdi
);
2446 if (ret
< 0 || bdi
.cluster_size
== 0) {
2447 return bs
->request_alignment
;
2449 return bdi
.cluster_size
;
2453 static bool tracked_request_overlaps(BdrvTrackedRequest
*req
,
2454 int64_t offset
, unsigned int bytes
)
2457 if (offset
>= req
->overlap_offset
+ req
->overlap_bytes
) {
2461 if (req
->overlap_offset
>= offset
+ bytes
) {
2467 static bool coroutine_fn
wait_serialising_requests(BdrvTrackedRequest
*self
)
2469 BlockDriverState
*bs
= self
->bs
;
2470 BdrvTrackedRequest
*req
;
2472 bool waited
= false;
2474 if (!bs
->serialising_in_flight
) {
2480 QLIST_FOREACH(req
, &bs
->tracked_requests
, list
) {
2481 if (req
== self
|| (!req
->serialising
&& !self
->serialising
)) {
2484 if (tracked_request_overlaps(req
, self
->overlap_offset
,
2485 self
->overlap_bytes
))
2487 /* Hitting this means there was a reentrant request, for
2488 * example, a block driver issuing nested requests. This must
2489 * never happen since it means deadlock.
2491 assert(qemu_coroutine_self() != req
->co
);
2493 /* If the request is already (indirectly) waiting for us, or
2494 * will wait for us as soon as it wakes up, then just go on
2495 * (instead of producing a deadlock in the former case). */
2496 if (!req
->waiting_for
) {
2497 self
->waiting_for
= req
;
2498 qemu_co_queue_wait(&req
->wait_queue
);
2499 self
->waiting_for
= NULL
;
2514 * -EINVAL - backing format specified, but no file
2515 * -ENOSPC - can't update the backing file because no space is left in the
2517 * -ENOTSUP - format driver doesn't support changing the backing file
2519 int bdrv_change_backing_file(BlockDriverState
*bs
,
2520 const char *backing_file
, const char *backing_fmt
)
2522 BlockDriver
*drv
= bs
->drv
;
2525 /* Backing file format doesn't make sense without a backing file */
2526 if (backing_fmt
&& !backing_file
) {
2530 if (drv
->bdrv_change_backing_file
!= NULL
) {
2531 ret
= drv
->bdrv_change_backing_file(bs
, backing_file
, backing_fmt
);
2537 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_file
?: "");
2538 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
), backing_fmt
?: "");
2544 * Finds the image layer in the chain that has 'bs' as its backing file.
2546 * active is the current topmost image.
2548 * Returns NULL if bs is not found in active's image chain,
2549 * or if active == bs.
2551 BlockDriverState
*bdrv_find_overlay(BlockDriverState
*active
,
2552 BlockDriverState
*bs
)
2554 BlockDriverState
*overlay
= NULL
;
2555 BlockDriverState
*intermediate
;
2557 assert(active
!= NULL
);
2560 /* if bs is the same as active, then by definition it has no overlay
2566 intermediate
= active
;
2567 while (intermediate
->backing_hd
) {
2568 if (intermediate
->backing_hd
== bs
) {
2569 overlay
= intermediate
;
2572 intermediate
= intermediate
->backing_hd
;
2578 typedef struct BlkIntermediateStates
{
2579 BlockDriverState
*bs
;
2580 QSIMPLEQ_ENTRY(BlkIntermediateStates
) entry
;
2581 } BlkIntermediateStates
;
2585 * Drops images above 'base' up to and including 'top', and sets the image
2586 * above 'top' to have base as its backing file.
2588 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2589 * information in 'bs' can be properly updated.
2591 * E.g., this will convert the following chain:
2592 * bottom <- base <- intermediate <- top <- active
2596 * bottom <- base <- active
2598 * It is allowed for bottom==base, in which case it converts:
2600 * base <- intermediate <- top <- active
2607 * if active == top, that is considered an error
2610 int bdrv_drop_intermediate(BlockDriverState
*active
, BlockDriverState
*top
,
2611 BlockDriverState
*base
)
2613 BlockDriverState
*intermediate
;
2614 BlockDriverState
*base_bs
= NULL
;
2615 BlockDriverState
*new_top_bs
= NULL
;
2616 BlkIntermediateStates
*intermediate_state
, *next
;
2619 QSIMPLEQ_HEAD(states_to_delete
, BlkIntermediateStates
) states_to_delete
;
2620 QSIMPLEQ_INIT(&states_to_delete
);
2622 if (!top
->drv
|| !base
->drv
) {
2626 new_top_bs
= bdrv_find_overlay(active
, top
);
2628 if (new_top_bs
== NULL
) {
2629 /* we could not find the image above 'top', this is an error */
2633 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2634 * to do, no intermediate images */
2635 if (new_top_bs
->backing_hd
== base
) {
2642 /* now we will go down through the list, and add each BDS we find
2643 * into our deletion queue, until we hit the 'base'
2645 while (intermediate
) {
2646 intermediate_state
= g_malloc0(sizeof(BlkIntermediateStates
));
2647 intermediate_state
->bs
= intermediate
;
2648 QSIMPLEQ_INSERT_TAIL(&states_to_delete
, intermediate_state
, entry
);
2650 if (intermediate
->backing_hd
== base
) {
2651 base_bs
= intermediate
->backing_hd
;
2654 intermediate
= intermediate
->backing_hd
;
2656 if (base_bs
== NULL
) {
2657 /* something went wrong, we did not end at the base. safely
2658 * unravel everything, and exit with error */
2662 /* success - we can delete the intermediate states, and link top->base */
2663 ret
= bdrv_change_backing_file(new_top_bs
, base_bs
->filename
,
2664 base_bs
->drv
? base_bs
->drv
->format_name
: "");
2668 bdrv_set_backing_hd(new_top_bs
, base_bs
);
2670 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2671 /* so that bdrv_close() does not recursively close the chain */
2672 bdrv_set_backing_hd(intermediate_state
->bs
, NULL
);
2673 bdrv_unref(intermediate_state
->bs
);
2678 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2679 g_free(intermediate_state
);
2685 static int bdrv_check_byte_request(BlockDriverState
*bs
, int64_t offset
,
2690 if (size
> INT_MAX
) {
2694 if (!bdrv_is_inserted(bs
))
2700 len
= bdrv_getlength(bs
);
2705 if ((offset
> len
) || (len
- offset
< size
))
2711 static int bdrv_check_request(BlockDriverState
*bs
, int64_t sector_num
,
2714 if (nb_sectors
< 0 || nb_sectors
> INT_MAX
/ BDRV_SECTOR_SIZE
) {
2718 return bdrv_check_byte_request(bs
, sector_num
* BDRV_SECTOR_SIZE
,
2719 nb_sectors
* BDRV_SECTOR_SIZE
);
2722 typedef struct RwCo
{
2723 BlockDriverState
*bs
;
2728 BdrvRequestFlags flags
;
2731 static void coroutine_fn
bdrv_rw_co_entry(void *opaque
)
2733 RwCo
*rwco
= opaque
;
2735 if (!rwco
->is_write
) {
2736 rwco
->ret
= bdrv_co_do_preadv(rwco
->bs
, rwco
->offset
,
2737 rwco
->qiov
->size
, rwco
->qiov
,
2740 rwco
->ret
= bdrv_co_do_pwritev(rwco
->bs
, rwco
->offset
,
2741 rwco
->qiov
->size
, rwco
->qiov
,
2747 * Process a vectored synchronous request using coroutines
2749 static int bdrv_prwv_co(BlockDriverState
*bs
, int64_t offset
,
2750 QEMUIOVector
*qiov
, bool is_write
,
2751 BdrvRequestFlags flags
)
2758 .is_write
= is_write
,
2764 * In sync call context, when the vcpu is blocked, this throttling timer
2765 * will not fire; so the I/O throttling function has to be disabled here
2766 * if it has been enabled.
2768 if (bs
->io_limits_enabled
) {
2769 fprintf(stderr
, "Disabling I/O throttling on '%s' due "
2770 "to synchronous I/O.\n", bdrv_get_device_name(bs
));
2771 bdrv_io_limits_disable(bs
);
2774 if (qemu_in_coroutine()) {
2775 /* Fast-path if already in coroutine context */
2776 bdrv_rw_co_entry(&rwco
);
2778 co
= qemu_coroutine_create(bdrv_rw_co_entry
);
2779 qemu_coroutine_enter(co
, &rwco
);
2780 while (rwco
.ret
== NOT_DONE
) {
2788 * Process a synchronous request using coroutines
2790 static int bdrv_rw_co(BlockDriverState
*bs
, int64_t sector_num
, uint8_t *buf
,
2791 int nb_sectors
, bool is_write
, BdrvRequestFlags flags
)
2794 struct iovec iov
= {
2795 .iov_base
= (void *)buf
,
2796 .iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
,
2799 if (nb_sectors
< 0 || nb_sectors
> INT_MAX
/ BDRV_SECTOR_SIZE
) {
2803 qemu_iovec_init_external(&qiov
, &iov
, 1);
2804 return bdrv_prwv_co(bs
, sector_num
<< BDRV_SECTOR_BITS
,
2805 &qiov
, is_write
, flags
);
2808 /* return < 0 if error. See bdrv_write() for the return codes */
2809 int bdrv_read(BlockDriverState
*bs
, int64_t sector_num
,
2810 uint8_t *buf
, int nb_sectors
)
2812 return bdrv_rw_co(bs
, sector_num
, buf
, nb_sectors
, false, 0);
2815 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2816 int bdrv_read_unthrottled(BlockDriverState
*bs
, int64_t sector_num
,
2817 uint8_t *buf
, int nb_sectors
)
2822 enabled
= bs
->io_limits_enabled
;
2823 bs
->io_limits_enabled
= false;
2824 ret
= bdrv_read(bs
, sector_num
, buf
, nb_sectors
);
2825 bs
->io_limits_enabled
= enabled
;
2829 /* Return < 0 if error. Important errors are:
2830 -EIO generic I/O error (may happen for all errors)
2831 -ENOMEDIUM No media inserted.
2832 -EINVAL Invalid sector number or nb_sectors
2833 -EACCES Trying to write a read-only device
2835 int bdrv_write(BlockDriverState
*bs
, int64_t sector_num
,
2836 const uint8_t *buf
, int nb_sectors
)
2838 return bdrv_rw_co(bs
, sector_num
, (uint8_t *)buf
, nb_sectors
, true, 0);
2841 int bdrv_write_zeroes(BlockDriverState
*bs
, int64_t sector_num
,
2842 int nb_sectors
, BdrvRequestFlags flags
)
2844 return bdrv_rw_co(bs
, sector_num
, NULL
, nb_sectors
, true,
2845 BDRV_REQ_ZERO_WRITE
| flags
);
2849 * Completely zero out a block device with the help of bdrv_write_zeroes.
2850 * The operation is sped up by checking the block status and only writing
2851 * zeroes to the device if they currently do not return zeroes. Optional
2852 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2854 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2856 int bdrv_make_zero(BlockDriverState
*bs
, BdrvRequestFlags flags
)
2858 int64_t target_size
;
2859 int64_t ret
, nb_sectors
, sector_num
= 0;
2862 target_size
= bdrv_getlength(bs
);
2863 if (target_size
< 0) {
2866 target_size
/= BDRV_SECTOR_SIZE
;
2869 nb_sectors
= target_size
- sector_num
;
2870 if (nb_sectors
<= 0) {
2873 if (nb_sectors
> INT_MAX
) {
2874 nb_sectors
= INT_MAX
;
2876 ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, &n
);
2878 error_report("error getting block status at sector %" PRId64
": %s",
2879 sector_num
, strerror(-ret
));
2882 if (ret
& BDRV_BLOCK_ZERO
) {
2886 ret
= bdrv_write_zeroes(bs
, sector_num
, n
, flags
);
2888 error_report("error writing zeroes at sector %" PRId64
": %s",
2889 sector_num
, strerror(-ret
));
2896 int bdrv_pread(BlockDriverState
*bs
, int64_t offset
, void *buf
, int bytes
)
2899 struct iovec iov
= {
2900 .iov_base
= (void *)buf
,
2909 qemu_iovec_init_external(&qiov
, &iov
, 1);
2910 ret
= bdrv_prwv_co(bs
, offset
, &qiov
, false, 0);
2918 int bdrv_pwritev(BlockDriverState
*bs
, int64_t offset
, QEMUIOVector
*qiov
)
2922 ret
= bdrv_prwv_co(bs
, offset
, qiov
, true, 0);
2930 int bdrv_pwrite(BlockDriverState
*bs
, int64_t offset
,
2931 const void *buf
, int bytes
)
2934 struct iovec iov
= {
2935 .iov_base
= (void *) buf
,
2943 qemu_iovec_init_external(&qiov
, &iov
, 1);
2944 return bdrv_pwritev(bs
, offset
, &qiov
);
2948 * Writes to the file and ensures that no writes are reordered across this
2949 * request (acts as a barrier)
2951 * Returns 0 on success, -errno in error cases.
2953 int bdrv_pwrite_sync(BlockDriverState
*bs
, int64_t offset
,
2954 const void *buf
, int count
)
2958 ret
= bdrv_pwrite(bs
, offset
, buf
, count
);
2963 /* No flush needed for cache modes that already do it */
2964 if (bs
->enable_write_cache
) {
2971 static int coroutine_fn
bdrv_co_do_copy_on_readv(BlockDriverState
*bs
,
2972 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2974 /* Perform I/O through a temporary buffer so that users who scribble over
2975 * their read buffer while the operation is in progress do not end up
2976 * modifying the image file. This is critical for zero-copy guest I/O
2977 * where anything might happen inside guest memory.
2979 void *bounce_buffer
;
2981 BlockDriver
*drv
= bs
->drv
;
2983 QEMUIOVector bounce_qiov
;
2984 int64_t cluster_sector_num
;
2985 int cluster_nb_sectors
;
2989 /* Cover entire cluster so no additional backing file I/O is required when
2990 * allocating cluster in the image file.
2992 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
2993 &cluster_sector_num
, &cluster_nb_sectors
);
2995 trace_bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
,
2996 cluster_sector_num
, cluster_nb_sectors
);
2998 iov
.iov_len
= cluster_nb_sectors
* BDRV_SECTOR_SIZE
;
2999 iov
.iov_base
= bounce_buffer
= qemu_blockalign(bs
, iov
.iov_len
);
3000 qemu_iovec_init_external(&bounce_qiov
, &iov
, 1);
3002 ret
= drv
->bdrv_co_readv(bs
, cluster_sector_num
, cluster_nb_sectors
,
3008 if (drv
->bdrv_co_write_zeroes
&&
3009 buffer_is_zero(bounce_buffer
, iov
.iov_len
)) {
3010 ret
= bdrv_co_do_write_zeroes(bs
, cluster_sector_num
,
3011 cluster_nb_sectors
, 0);
3013 /* This does not change the data on the disk, it is not necessary
3014 * to flush even in cache=writethrough mode.
3016 ret
= drv
->bdrv_co_writev(bs
, cluster_sector_num
, cluster_nb_sectors
,
3021 /* It might be okay to ignore write errors for guest requests. If this
3022 * is a deliberate copy-on-read then we don't want to ignore the error.
3023 * Simply report it in all cases.
3028 skip_bytes
= (sector_num
- cluster_sector_num
) * BDRV_SECTOR_SIZE
;
3029 qemu_iovec_from_buf(qiov
, 0, bounce_buffer
+ skip_bytes
,
3030 nb_sectors
* BDRV_SECTOR_SIZE
);
3033 qemu_vfree(bounce_buffer
);
3038 * Forwards an already correctly aligned request to the BlockDriver. This
3039 * handles copy on read and zeroing after EOF; any other features must be
3040 * implemented by the caller.
3042 static int coroutine_fn
bdrv_aligned_preadv(BlockDriverState
*bs
,
3043 BdrvTrackedRequest
*req
, int64_t offset
, unsigned int bytes
,
3044 int64_t align
, QEMUIOVector
*qiov
, int flags
)
3046 BlockDriver
*drv
= bs
->drv
;
3049 int64_t sector_num
= offset
>> BDRV_SECTOR_BITS
;
3050 unsigned int nb_sectors
= bytes
>> BDRV_SECTOR_BITS
;
3052 assert((offset
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3053 assert((bytes
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3055 /* Handle Copy on Read and associated serialisation */
3056 if (flags
& BDRV_REQ_COPY_ON_READ
) {
3057 /* If we touch the same cluster it counts as an overlap. This
3058 * guarantees that allocating writes will be serialized and not race
3059 * with each other for the same cluster. For example, in copy-on-read
3060 * it ensures that the CoR read and write operations are atomic and
3061 * guest writes cannot interleave between them. */
3062 mark_request_serialising(req
, bdrv_get_cluster_size(bs
));
3065 wait_serialising_requests(req
);
3067 if (flags
& BDRV_REQ_COPY_ON_READ
) {
3070 ret
= bdrv_is_allocated(bs
, sector_num
, nb_sectors
, &pnum
);
3075 if (!ret
|| pnum
!= nb_sectors
) {
3076 ret
= bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
, qiov
);
3081 /* Forward the request to the BlockDriver */
3082 if (!(bs
->zero_beyond_eof
&& bs
->growable
)) {
3083 ret
= drv
->bdrv_co_readv(bs
, sector_num
, nb_sectors
, qiov
);
3085 /* Read zeros after EOF of growable BDSes */
3086 int64_t len
, total_sectors
, max_nb_sectors
;
3088 len
= bdrv_getlength(bs
);
3094 total_sectors
= DIV_ROUND_UP(len
, BDRV_SECTOR_SIZE
);
3095 max_nb_sectors
= ROUND_UP(MAX(0, total_sectors
- sector_num
),
3096 align
>> BDRV_SECTOR_BITS
);
3097 if (max_nb_sectors
> 0) {
3098 ret
= drv
->bdrv_co_readv(bs
, sector_num
,
3099 MIN(nb_sectors
, max_nb_sectors
), qiov
);
3104 /* Reading beyond end of file is supposed to produce zeroes */
3105 if (ret
== 0 && total_sectors
< sector_num
+ nb_sectors
) {
3106 uint64_t offset
= MAX(0, total_sectors
- sector_num
);
3107 uint64_t bytes
= (sector_num
+ nb_sectors
- offset
) *
3109 qemu_iovec_memset(qiov
, offset
* BDRV_SECTOR_SIZE
, 0, bytes
);
3118 * Handle a read request in coroutine context
3120 static int coroutine_fn
bdrv_co_do_preadv(BlockDriverState
*bs
,
3121 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
3122 BdrvRequestFlags flags
)
3124 BlockDriver
*drv
= bs
->drv
;
3125 BdrvTrackedRequest req
;
3127 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3128 uint64_t align
= MAX(BDRV_SECTOR_SIZE
, bs
->request_alignment
);
3129 uint8_t *head_buf
= NULL
;
3130 uint8_t *tail_buf
= NULL
;
3131 QEMUIOVector local_qiov
;
3132 bool use_local_qiov
= false;
3138 if (bdrv_check_byte_request(bs
, offset
, bytes
)) {
3142 if (bs
->copy_on_read
) {
3143 flags
|= BDRV_REQ_COPY_ON_READ
;
3146 /* throttling disk I/O */
3147 if (bs
->io_limits_enabled
) {
3148 bdrv_io_limits_intercept(bs
, bytes
, false);
3151 /* Align read if necessary by padding qiov */
3152 if (offset
& (align
- 1)) {
3153 head_buf
= qemu_blockalign(bs
, align
);
3154 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 2);
3155 qemu_iovec_add(&local_qiov
, head_buf
, offset
& (align
- 1));
3156 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3157 use_local_qiov
= true;
3159 bytes
+= offset
& (align
- 1);
3160 offset
= offset
& ~(align
- 1);
3163 if ((offset
+ bytes
) & (align
- 1)) {
3164 if (!use_local_qiov
) {
3165 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 1);
3166 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3167 use_local_qiov
= true;
3169 tail_buf
= qemu_blockalign(bs
, align
);
3170 qemu_iovec_add(&local_qiov
, tail_buf
,
3171 align
- ((offset
+ bytes
) & (align
- 1)));
3173 bytes
= ROUND_UP(bytes
, align
);
3176 tracked_request_begin(&req
, bs
, offset
, bytes
, false);
3177 ret
= bdrv_aligned_preadv(bs
, &req
, offset
, bytes
, align
,
3178 use_local_qiov
? &local_qiov
: qiov
,
3180 tracked_request_end(&req
);
3182 if (use_local_qiov
) {
3183 qemu_iovec_destroy(&local_qiov
);
3184 qemu_vfree(head_buf
);
3185 qemu_vfree(tail_buf
);
3191 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
3192 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
3193 BdrvRequestFlags flags
)
3195 if (nb_sectors
< 0 || nb_sectors
> (UINT_MAX
>> BDRV_SECTOR_BITS
)) {
3199 return bdrv_co_do_preadv(bs
, sector_num
<< BDRV_SECTOR_BITS
,
3200 nb_sectors
<< BDRV_SECTOR_BITS
, qiov
, flags
);
3203 int coroutine_fn
bdrv_co_readv(BlockDriverState
*bs
, int64_t sector_num
,
3204 int nb_sectors
, QEMUIOVector
*qiov
)
3206 trace_bdrv_co_readv(bs
, sector_num
, nb_sectors
);
3208 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
, 0);
3211 int coroutine_fn
bdrv_co_copy_on_readv(BlockDriverState
*bs
,
3212 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
3214 trace_bdrv_co_copy_on_readv(bs
, sector_num
, nb_sectors
);
3216 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
,
3217 BDRV_REQ_COPY_ON_READ
);
3220 /* if no limit is specified in the BlockLimits use a default
3221 * of 32768 512-byte sectors (16 MiB) per request.
3223 #define MAX_WRITE_ZEROES_DEFAULT 32768
3225 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
3226 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
)
3228 BlockDriver
*drv
= bs
->drv
;
3230 struct iovec iov
= {0};
3233 int max_write_zeroes
= bs
->bl
.max_write_zeroes
?
3234 bs
->bl
.max_write_zeroes
: MAX_WRITE_ZEROES_DEFAULT
;
3236 while (nb_sectors
> 0 && !ret
) {
3237 int num
= nb_sectors
;
3239 /* Align request. Block drivers can expect the "bulk" of the request
3242 if (bs
->bl
.write_zeroes_alignment
3243 && num
> bs
->bl
.write_zeroes_alignment
) {
3244 if (sector_num
% bs
->bl
.write_zeroes_alignment
!= 0) {
3245 /* Make a small request up to the first aligned sector. */
3246 num
= bs
->bl
.write_zeroes_alignment
;
3247 num
-= sector_num
% bs
->bl
.write_zeroes_alignment
;
3248 } else if ((sector_num
+ num
) % bs
->bl
.write_zeroes_alignment
!= 0) {
3249 /* Shorten the request to the last aligned sector. num cannot
3250 * underflow because num > bs->bl.write_zeroes_alignment.
3252 num
-= (sector_num
+ num
) % bs
->bl
.write_zeroes_alignment
;
3256 /* limit request size */
3257 if (num
> max_write_zeroes
) {
3258 num
= max_write_zeroes
;
3262 /* First try the efficient write zeroes operation */
3263 if (drv
->bdrv_co_write_zeroes
) {
3264 ret
= drv
->bdrv_co_write_zeroes(bs
, sector_num
, num
, flags
);
3267 if (ret
== -ENOTSUP
) {
3268 /* Fall back to bounce buffer if write zeroes is unsupported */
3269 iov
.iov_len
= num
* BDRV_SECTOR_SIZE
;
3270 if (iov
.iov_base
== NULL
) {
3271 iov
.iov_base
= qemu_blockalign(bs
, num
* BDRV_SECTOR_SIZE
);
3272 memset(iov
.iov_base
, 0, num
* BDRV_SECTOR_SIZE
);
3274 qemu_iovec_init_external(&qiov
, &iov
, 1);
3276 ret
= drv
->bdrv_co_writev(bs
, sector_num
, num
, &qiov
);
3278 /* Keep bounce buffer around if it is big enough for all
3279 * all future requests.
3281 if (num
< max_write_zeroes
) {
3282 qemu_vfree(iov
.iov_base
);
3283 iov
.iov_base
= NULL
;
3291 qemu_vfree(iov
.iov_base
);
3296 * Forwards an already correctly aligned write request to the BlockDriver.
3298 static int coroutine_fn
bdrv_aligned_pwritev(BlockDriverState
*bs
,
3299 BdrvTrackedRequest
*req
, int64_t offset
, unsigned int bytes
,
3300 QEMUIOVector
*qiov
, int flags
)
3302 BlockDriver
*drv
= bs
->drv
;
3306 int64_t sector_num
= offset
>> BDRV_SECTOR_BITS
;
3307 unsigned int nb_sectors
= bytes
>> BDRV_SECTOR_BITS
;
3309 assert((offset
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3310 assert((bytes
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3312 waited
= wait_serialising_requests(req
);
3313 assert(!waited
|| !req
->serialising
);
3314 assert(req
->overlap_offset
<= offset
);
3315 assert(offset
+ bytes
<= req
->overlap_offset
+ req
->overlap_bytes
);
3317 ret
= notifier_with_return_list_notify(&bs
->before_write_notifiers
, req
);
3319 if (!ret
&& bs
->detect_zeroes
!= BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF
&&
3320 !(flags
& BDRV_REQ_ZERO_WRITE
) && drv
->bdrv_co_write_zeroes
&&
3321 qemu_iovec_is_zero(qiov
)) {
3322 flags
|= BDRV_REQ_ZERO_WRITE
;
3323 if (bs
->detect_zeroes
== BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP
) {
3324 flags
|= BDRV_REQ_MAY_UNMAP
;
3329 /* Do nothing, write notifier decided to fail this request */
3330 } else if (flags
& BDRV_REQ_ZERO_WRITE
) {
3331 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_ZERO
);
3332 ret
= bdrv_co_do_write_zeroes(bs
, sector_num
, nb_sectors
, flags
);
3334 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV
);
3335 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, qiov
);
3337 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_DONE
);
3339 if (ret
== 0 && !bs
->enable_write_cache
) {
3340 ret
= bdrv_co_flush(bs
);
3343 bdrv_set_dirty(bs
, sector_num
, nb_sectors
);
3345 if (bs
->wr_highest_sector
< sector_num
+ nb_sectors
- 1) {
3346 bs
->wr_highest_sector
= sector_num
+ nb_sectors
- 1;
3348 if (bs
->growable
&& ret
>= 0) {
3349 bs
->total_sectors
= MAX(bs
->total_sectors
, sector_num
+ nb_sectors
);
3356 * Handle a write request in coroutine context
3358 static int coroutine_fn
bdrv_co_do_pwritev(BlockDriverState
*bs
,
3359 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
3360 BdrvRequestFlags flags
)
3362 BdrvTrackedRequest req
;
3363 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3364 uint64_t align
= MAX(BDRV_SECTOR_SIZE
, bs
->request_alignment
);
3365 uint8_t *head_buf
= NULL
;
3366 uint8_t *tail_buf
= NULL
;
3367 QEMUIOVector local_qiov
;
3368 bool use_local_qiov
= false;
3374 if (bs
->read_only
) {
3377 if (bdrv_check_byte_request(bs
, offset
, bytes
)) {
3381 /* throttling disk I/O */
3382 if (bs
->io_limits_enabled
) {
3383 bdrv_io_limits_intercept(bs
, bytes
, true);
3387 * Align write if necessary by performing a read-modify-write cycle.
3388 * Pad qiov with the read parts and be sure to have a tracked request not
3389 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3391 tracked_request_begin(&req
, bs
, offset
, bytes
, true);
3393 if (offset
& (align
- 1)) {
3394 QEMUIOVector head_qiov
;
3395 struct iovec head_iov
;
3397 mark_request_serialising(&req
, align
);
3398 wait_serialising_requests(&req
);
3400 head_buf
= qemu_blockalign(bs
, align
);
3401 head_iov
= (struct iovec
) {
3402 .iov_base
= head_buf
,
3405 qemu_iovec_init_external(&head_qiov
, &head_iov
, 1);
3407 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_HEAD
);
3408 ret
= bdrv_aligned_preadv(bs
, &req
, offset
& ~(align
- 1), align
,
3409 align
, &head_qiov
, 0);
3413 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_AFTER_HEAD
);
3415 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 2);
3416 qemu_iovec_add(&local_qiov
, head_buf
, offset
& (align
- 1));
3417 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3418 use_local_qiov
= true;
3420 bytes
+= offset
& (align
- 1);
3421 offset
= offset
& ~(align
- 1);
3424 if ((offset
+ bytes
) & (align
- 1)) {
3425 QEMUIOVector tail_qiov
;
3426 struct iovec tail_iov
;
3430 mark_request_serialising(&req
, align
);
3431 waited
= wait_serialising_requests(&req
);
3432 assert(!waited
|| !use_local_qiov
);
3434 tail_buf
= qemu_blockalign(bs
, align
);
3435 tail_iov
= (struct iovec
) {
3436 .iov_base
= tail_buf
,
3439 qemu_iovec_init_external(&tail_qiov
, &tail_iov
, 1);
3441 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_TAIL
);
3442 ret
= bdrv_aligned_preadv(bs
, &req
, (offset
+ bytes
) & ~(align
- 1), align
,
3443 align
, &tail_qiov
, 0);
3447 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_AFTER_TAIL
);
3449 if (!use_local_qiov
) {
3450 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 1);
3451 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3452 use_local_qiov
= true;
3455 tail_bytes
= (offset
+ bytes
) & (align
- 1);
3456 qemu_iovec_add(&local_qiov
, tail_buf
+ tail_bytes
, align
- tail_bytes
);
3458 bytes
= ROUND_UP(bytes
, align
);
3461 ret
= bdrv_aligned_pwritev(bs
, &req
, offset
, bytes
,
3462 use_local_qiov
? &local_qiov
: qiov
,
3466 tracked_request_end(&req
);
3468 if (use_local_qiov
) {
3469 qemu_iovec_destroy(&local_qiov
);
3471 qemu_vfree(head_buf
);
3472 qemu_vfree(tail_buf
);
3477 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
3478 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
3479 BdrvRequestFlags flags
)
3481 if (nb_sectors
< 0 || nb_sectors
> (INT_MAX
>> BDRV_SECTOR_BITS
)) {
3485 return bdrv_co_do_pwritev(bs
, sector_num
<< BDRV_SECTOR_BITS
,
3486 nb_sectors
<< BDRV_SECTOR_BITS
, qiov
, flags
);
3489 int coroutine_fn
bdrv_co_writev(BlockDriverState
*bs
, int64_t sector_num
,
3490 int nb_sectors
, QEMUIOVector
*qiov
)
3492 trace_bdrv_co_writev(bs
, sector_num
, nb_sectors
);
3494 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, qiov
, 0);
3497 int coroutine_fn
bdrv_co_write_zeroes(BlockDriverState
*bs
,
3498 int64_t sector_num
, int nb_sectors
,
3499 BdrvRequestFlags flags
)
3501 trace_bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
, flags
);
3503 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
3504 flags
&= ~BDRV_REQ_MAY_UNMAP
;
3507 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, NULL
,
3508 BDRV_REQ_ZERO_WRITE
| flags
);
3512 * Truncate file to 'offset' bytes (needed only for file protocols)
3514 int bdrv_truncate(BlockDriverState
*bs
, int64_t offset
)
3516 BlockDriver
*drv
= bs
->drv
;
3520 if (!drv
->bdrv_truncate
)
3524 if (bdrv_op_is_blocked(bs
, BLOCK_OP_TYPE_RESIZE
, NULL
)) {
3527 ret
= drv
->bdrv_truncate(bs
, offset
);
3529 ret
= refresh_total_sectors(bs
, offset
>> BDRV_SECTOR_BITS
);
3530 bdrv_dev_resize_cb(bs
);
3536 * Length of a allocated file in bytes. Sparse files are counted by actual
3537 * allocated space. Return < 0 if error or unknown.
3539 int64_t bdrv_get_allocated_file_size(BlockDriverState
*bs
)
3541 BlockDriver
*drv
= bs
->drv
;
3545 if (drv
->bdrv_get_allocated_file_size
) {
3546 return drv
->bdrv_get_allocated_file_size(bs
);
3549 return bdrv_get_allocated_file_size(bs
->file
);
3555 * Length of a file in bytes. Return < 0 if error or unknown.
3557 int64_t bdrv_getlength(BlockDriverState
*bs
)
3559 BlockDriver
*drv
= bs
->drv
;
3563 if (drv
->has_variable_length
) {
3564 int ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
3569 return bs
->total_sectors
* BDRV_SECTOR_SIZE
;
3572 /* return 0 as number of sectors if no device present or error */
3573 void bdrv_get_geometry(BlockDriverState
*bs
, uint64_t *nb_sectors_ptr
)
3576 length
= bdrv_getlength(bs
);
3580 length
= length
>> BDRV_SECTOR_BITS
;
3581 *nb_sectors_ptr
= length
;
3584 void bdrv_set_on_error(BlockDriverState
*bs
, BlockdevOnError on_read_error
,
3585 BlockdevOnError on_write_error
)
3587 bs
->on_read_error
= on_read_error
;
3588 bs
->on_write_error
= on_write_error
;
3591 BlockdevOnError
bdrv_get_on_error(BlockDriverState
*bs
, bool is_read
)
3593 return is_read
? bs
->on_read_error
: bs
->on_write_error
;
3596 BlockErrorAction
bdrv_get_error_action(BlockDriverState
*bs
, bool is_read
, int error
)
3598 BlockdevOnError on_err
= is_read
? bs
->on_read_error
: bs
->on_write_error
;
3601 case BLOCKDEV_ON_ERROR_ENOSPC
:
3602 return (error
== ENOSPC
) ? BDRV_ACTION_STOP
: BDRV_ACTION_REPORT
;
3603 case BLOCKDEV_ON_ERROR_STOP
:
3604 return BDRV_ACTION_STOP
;
3605 case BLOCKDEV_ON_ERROR_REPORT
:
3606 return BDRV_ACTION_REPORT
;
3607 case BLOCKDEV_ON_ERROR_IGNORE
:
3608 return BDRV_ACTION_IGNORE
;
3614 /* This is done by device models because, while the block layer knows
3615 * about the error, it does not know whether an operation comes from
3616 * the device or the block layer (from a job, for example).
3618 void bdrv_error_action(BlockDriverState
*bs
, BlockErrorAction action
,
3619 bool is_read
, int error
)
3622 bdrv_emit_qmp_error_event(bs
, QEVENT_BLOCK_IO_ERROR
, action
, is_read
);
3623 if (action
== BDRV_ACTION_STOP
) {
3624 vm_stop(RUN_STATE_IO_ERROR
);
3625 bdrv_iostatus_set_err(bs
, error
);
3629 int bdrv_is_read_only(BlockDriverState
*bs
)
3631 return bs
->read_only
;
3634 int bdrv_is_sg(BlockDriverState
*bs
)
3639 int bdrv_enable_write_cache(BlockDriverState
*bs
)
3641 return bs
->enable_write_cache
;
3644 void bdrv_set_enable_write_cache(BlockDriverState
*bs
, bool wce
)
3646 bs
->enable_write_cache
= wce
;
3648 /* so a reopen() will preserve wce */
3650 bs
->open_flags
|= BDRV_O_CACHE_WB
;
3652 bs
->open_flags
&= ~BDRV_O_CACHE_WB
;
3656 int bdrv_is_encrypted(BlockDriverState
*bs
)
3658 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
3660 return bs
->encrypted
;
3663 int bdrv_key_required(BlockDriverState
*bs
)
3665 BlockDriverState
*backing_hd
= bs
->backing_hd
;
3667 if (backing_hd
&& backing_hd
->encrypted
&& !backing_hd
->valid_key
)
3669 return (bs
->encrypted
&& !bs
->valid_key
);
3672 int bdrv_set_key(BlockDriverState
*bs
, const char *key
)
3675 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
) {
3676 ret
= bdrv_set_key(bs
->backing_hd
, key
);
3682 if (!bs
->encrypted
) {
3684 } else if (!bs
->drv
|| !bs
->drv
->bdrv_set_key
) {
3687 ret
= bs
->drv
->bdrv_set_key(bs
, key
);
3690 } else if (!bs
->valid_key
) {
3692 /* call the change callback now, we skipped it on open */
3693 bdrv_dev_change_media_cb(bs
, true);
3698 const char *bdrv_get_format_name(BlockDriverState
*bs
)
3700 return bs
->drv
? bs
->drv
->format_name
: NULL
;
3703 void bdrv_iterate_format(void (*it
)(void *opaque
, const char *name
),
3708 const char **formats
= NULL
;
3710 QLIST_FOREACH(drv
, &bdrv_drivers
, list
) {
3711 if (drv
->format_name
) {
3714 while (formats
&& i
&& !found
) {
3715 found
= !strcmp(formats
[--i
], drv
->format_name
);
3719 formats
= g_realloc(formats
, (count
+ 1) * sizeof(char *));
3720 formats
[count
++] = drv
->format_name
;
3721 it(opaque
, drv
->format_name
);
3728 /* This function is to find block backend bs */
3729 BlockDriverState
*bdrv_find(const char *name
)
3731 BlockDriverState
*bs
;
3733 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3734 if (!strcmp(name
, bs
->device_name
)) {
3741 /* This function is to find a node in the bs graph */
3742 BlockDriverState
*bdrv_find_node(const char *node_name
)
3744 BlockDriverState
*bs
;
3748 QTAILQ_FOREACH(bs
, &graph_bdrv_states
, node_list
) {
3749 if (!strcmp(node_name
, bs
->node_name
)) {
3756 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3757 BlockDeviceInfoList
*bdrv_named_nodes_list(void)
3759 BlockDeviceInfoList
*list
, *entry
;
3760 BlockDriverState
*bs
;
3763 QTAILQ_FOREACH(bs
, &graph_bdrv_states
, node_list
) {
3764 entry
= g_malloc0(sizeof(*entry
));
3765 entry
->value
= bdrv_block_device_info(bs
);
3773 BlockDriverState
*bdrv_lookup_bs(const char *device
,
3774 const char *node_name
,
3777 BlockDriverState
*bs
= NULL
;
3780 bs
= bdrv_find(device
);
3788 bs
= bdrv_find_node(node_name
);
3795 error_setg(errp
, "Cannot find device=%s nor node_name=%s",
3796 device
? device
: "",
3797 node_name
? node_name
: "");
3801 BlockDriverState
*bdrv_next(BlockDriverState
*bs
)
3804 return QTAILQ_FIRST(&bdrv_states
);
3806 return QTAILQ_NEXT(bs
, device_list
);
3809 void bdrv_iterate(void (*it
)(void *opaque
, BlockDriverState
*bs
), void *opaque
)
3811 BlockDriverState
*bs
;
3813 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3818 const char *bdrv_get_device_name(BlockDriverState
*bs
)
3820 return bs
->device_name
;
3823 int bdrv_get_flags(BlockDriverState
*bs
)
3825 return bs
->open_flags
;
3828 int bdrv_flush_all(void)
3830 BlockDriverState
*bs
;
3833 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3834 int ret
= bdrv_flush(bs
);
3835 if (ret
< 0 && !result
) {
3843 int bdrv_has_zero_init_1(BlockDriverState
*bs
)
3848 int bdrv_has_zero_init(BlockDriverState
*bs
)
3852 /* If BS is a copy on write image, it is initialized to
3853 the contents of the base image, which may not be zeroes. */
3854 if (bs
->backing_hd
) {
3857 if (bs
->drv
->bdrv_has_zero_init
) {
3858 return bs
->drv
->bdrv_has_zero_init(bs
);
3865 bool bdrv_unallocated_blocks_are_zero(BlockDriverState
*bs
)
3867 BlockDriverInfo bdi
;
3869 if (bs
->backing_hd
) {
3873 if (bdrv_get_info(bs
, &bdi
) == 0) {
3874 return bdi
.unallocated_blocks_are_zero
;
3880 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState
*bs
)
3882 BlockDriverInfo bdi
;
3884 if (bs
->backing_hd
|| !(bs
->open_flags
& BDRV_O_UNMAP
)) {
3888 if (bdrv_get_info(bs
, &bdi
) == 0) {
3889 return bdi
.can_write_zeroes_with_unmap
;
3895 typedef struct BdrvCoGetBlockStatusData
{
3896 BlockDriverState
*bs
;
3897 BlockDriverState
*base
;
3903 } BdrvCoGetBlockStatusData
;
3906 * Returns true iff the specified sector is present in the disk image. Drivers
3907 * not implementing the functionality are assumed to not support backing files,
3908 * hence all their sectors are reported as allocated.
3910 * If 'sector_num' is beyond the end of the disk image the return value is 0
3911 * and 'pnum' is set to 0.
3913 * 'pnum' is set to the number of sectors (including and immediately following
3914 * the specified sector) that are known to be in the same
3915 * allocated/unallocated state.
3917 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3918 * beyond the end of the disk image it will be clamped.
3920 static int64_t coroutine_fn
bdrv_co_get_block_status(BlockDriverState
*bs
,
3922 int nb_sectors
, int *pnum
)
3928 length
= bdrv_getlength(bs
);
3933 if (sector_num
>= (length
>> BDRV_SECTOR_BITS
)) {
3938 n
= bs
->total_sectors
- sector_num
;
3939 if (n
< nb_sectors
) {
3943 if (!bs
->drv
->bdrv_co_get_block_status
) {
3945 ret
= BDRV_BLOCK_DATA
| BDRV_BLOCK_ALLOCATED
;
3946 if (bs
->drv
->protocol_name
) {
3947 ret
|= BDRV_BLOCK_OFFSET_VALID
| (sector_num
* BDRV_SECTOR_SIZE
);
3952 ret
= bs
->drv
->bdrv_co_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
3958 if (ret
& BDRV_BLOCK_RAW
) {
3959 assert(ret
& BDRV_BLOCK_OFFSET_VALID
);
3960 return bdrv_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
3964 if (ret
& (BDRV_BLOCK_DATA
| BDRV_BLOCK_ZERO
)) {
3965 ret
|= BDRV_BLOCK_ALLOCATED
;
3968 if (!(ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
)) {
3969 if (bdrv_unallocated_blocks_are_zero(bs
)) {
3970 ret
|= BDRV_BLOCK_ZERO
;
3971 } else if (bs
->backing_hd
) {
3972 BlockDriverState
*bs2
= bs
->backing_hd
;
3973 int64_t length2
= bdrv_getlength(bs2
);
3974 if (length2
>= 0 && sector_num
>= (length2
>> BDRV_SECTOR_BITS
)) {
3975 ret
|= BDRV_BLOCK_ZERO
;
3981 (ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
) &&
3982 (ret
& BDRV_BLOCK_OFFSET_VALID
)) {
3983 ret2
= bdrv_co_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
3986 /* Ignore errors. This is just providing extra information, it
3987 * is useful but not necessary.
3989 ret
|= (ret2
& BDRV_BLOCK_ZERO
);
3996 /* Coroutine wrapper for bdrv_get_block_status() */
3997 static void coroutine_fn
bdrv_get_block_status_co_entry(void *opaque
)
3999 BdrvCoGetBlockStatusData
*data
= opaque
;
4000 BlockDriverState
*bs
= data
->bs
;
4002 data
->ret
= bdrv_co_get_block_status(bs
, data
->sector_num
, data
->nb_sectors
,
4008 * Synchronous wrapper around bdrv_co_get_block_status().
4010 * See bdrv_co_get_block_status() for details.
4012 int64_t bdrv_get_block_status(BlockDriverState
*bs
, int64_t sector_num
,
4013 int nb_sectors
, int *pnum
)
4016 BdrvCoGetBlockStatusData data
= {
4018 .sector_num
= sector_num
,
4019 .nb_sectors
= nb_sectors
,
4024 if (qemu_in_coroutine()) {
4025 /* Fast-path if already in coroutine context */
4026 bdrv_get_block_status_co_entry(&data
);
4028 co
= qemu_coroutine_create(bdrv_get_block_status_co_entry
);
4029 qemu_coroutine_enter(co
, &data
);
4030 while (!data
.done
) {
4037 int coroutine_fn
bdrv_is_allocated(BlockDriverState
*bs
, int64_t sector_num
,
4038 int nb_sectors
, int *pnum
)
4040 int64_t ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
4044 return (ret
& BDRV_BLOCK_ALLOCATED
);
4048 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
4050 * Return true if the given sector is allocated in any image between
4051 * BASE and TOP (inclusive). BASE can be NULL to check if the given
4052 * sector is allocated in any image of the chain. Return false otherwise.
4054 * 'pnum' is set to the number of sectors (including and immediately following
4055 * the specified sector) that are known to be in the same
4056 * allocated/unallocated state.
4059 int bdrv_is_allocated_above(BlockDriverState
*top
,
4060 BlockDriverState
*base
,
4062 int nb_sectors
, int *pnum
)
4064 BlockDriverState
*intermediate
;
4065 int ret
, n
= nb_sectors
;
4068 while (intermediate
&& intermediate
!= base
) {
4070 ret
= bdrv_is_allocated(intermediate
, sector_num
, nb_sectors
,
4080 * [sector_num, nb_sectors] is unallocated on top but intermediate
4083 * [sector_num+x, nr_sectors] allocated.
4085 if (n
> pnum_inter
&&
4086 (intermediate
== top
||
4087 sector_num
+ pnum_inter
< intermediate
->total_sectors
)) {
4091 intermediate
= intermediate
->backing_hd
;
4098 const char *bdrv_get_encrypted_filename(BlockDriverState
*bs
)
4100 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
4101 return bs
->backing_file
;
4102 else if (bs
->encrypted
)
4103 return bs
->filename
;
4108 void bdrv_get_backing_filename(BlockDriverState
*bs
,
4109 char *filename
, int filename_size
)
4111 pstrcpy(filename
, filename_size
, bs
->backing_file
);
4114 int bdrv_write_compressed(BlockDriverState
*bs
, int64_t sector_num
,
4115 const uint8_t *buf
, int nb_sectors
)
4117 BlockDriver
*drv
= bs
->drv
;
4120 if (!drv
->bdrv_write_compressed
)
4122 if (bdrv_check_request(bs
, sector_num
, nb_sectors
))
4125 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
4127 return drv
->bdrv_write_compressed(bs
, sector_num
, buf
, nb_sectors
);
4130 int bdrv_get_info(BlockDriverState
*bs
, BlockDriverInfo
*bdi
)
4132 BlockDriver
*drv
= bs
->drv
;
4135 if (!drv
->bdrv_get_info
)
4137 memset(bdi
, 0, sizeof(*bdi
));
4138 return drv
->bdrv_get_info(bs
, bdi
);
4141 ImageInfoSpecific
*bdrv_get_specific_info(BlockDriverState
*bs
)
4143 BlockDriver
*drv
= bs
->drv
;
4144 if (drv
&& drv
->bdrv_get_specific_info
) {
4145 return drv
->bdrv_get_specific_info(bs
);
4150 int bdrv_save_vmstate(BlockDriverState
*bs
, const uint8_t *buf
,
4151 int64_t pos
, int size
)
4154 struct iovec iov
= {
4155 .iov_base
= (void *) buf
,
4159 qemu_iovec_init_external(&qiov
, &iov
, 1);
4160 return bdrv_writev_vmstate(bs
, &qiov
, pos
);
4163 int bdrv_writev_vmstate(BlockDriverState
*bs
, QEMUIOVector
*qiov
, int64_t pos
)
4165 BlockDriver
*drv
= bs
->drv
;
4169 } else if (drv
->bdrv_save_vmstate
) {
4170 return drv
->bdrv_save_vmstate(bs
, qiov
, pos
);
4171 } else if (bs
->file
) {
4172 return bdrv_writev_vmstate(bs
->file
, qiov
, pos
);
4178 int bdrv_load_vmstate(BlockDriverState
*bs
, uint8_t *buf
,
4179 int64_t pos
, int size
)
4181 BlockDriver
*drv
= bs
->drv
;
4184 if (drv
->bdrv_load_vmstate
)
4185 return drv
->bdrv_load_vmstate(bs
, buf
, pos
, size
);
4187 return bdrv_load_vmstate(bs
->file
, buf
, pos
, size
);
4191 void bdrv_debug_event(BlockDriverState
*bs
, BlkDebugEvent event
)
4193 if (!bs
|| !bs
->drv
|| !bs
->drv
->bdrv_debug_event
) {
4197 bs
->drv
->bdrv_debug_event(bs
, event
);
4200 int bdrv_debug_breakpoint(BlockDriverState
*bs
, const char *event
,
4203 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_breakpoint
) {
4207 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_breakpoint
) {
4208 return bs
->drv
->bdrv_debug_breakpoint(bs
, event
, tag
);
4214 int bdrv_debug_remove_breakpoint(BlockDriverState
*bs
, const char *tag
)
4216 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_remove_breakpoint
) {
4220 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_remove_breakpoint
) {
4221 return bs
->drv
->bdrv_debug_remove_breakpoint(bs
, tag
);
4227 int bdrv_debug_resume(BlockDriverState
*bs
, const char *tag
)
4229 while (bs
&& (!bs
->drv
|| !bs
->drv
->bdrv_debug_resume
)) {
4233 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_resume
) {
4234 return bs
->drv
->bdrv_debug_resume(bs
, tag
);
4240 bool bdrv_debug_is_suspended(BlockDriverState
*bs
, const char *tag
)
4242 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_is_suspended
) {
4246 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_is_suspended
) {
4247 return bs
->drv
->bdrv_debug_is_suspended(bs
, tag
);
4253 int bdrv_is_snapshot(BlockDriverState
*bs
)
4255 return !!(bs
->open_flags
& BDRV_O_SNAPSHOT
);
4258 /* backing_file can either be relative, or absolute, or a protocol. If it is
4259 * relative, it must be relative to the chain. So, passing in bs->filename
4260 * from a BDS as backing_file should not be done, as that may be relative to
4261 * the CWD rather than the chain. */
4262 BlockDriverState
*bdrv_find_backing_image(BlockDriverState
*bs
,
4263 const char *backing_file
)
4265 char *filename_full
= NULL
;
4266 char *backing_file_full
= NULL
;
4267 char *filename_tmp
= NULL
;
4268 int is_protocol
= 0;
4269 BlockDriverState
*curr_bs
= NULL
;
4270 BlockDriverState
*retval
= NULL
;
4272 if (!bs
|| !bs
->drv
|| !backing_file
) {
4276 filename_full
= g_malloc(PATH_MAX
);
4277 backing_file_full
= g_malloc(PATH_MAX
);
4278 filename_tmp
= g_malloc(PATH_MAX
);
4280 is_protocol
= path_has_protocol(backing_file
);
4282 for (curr_bs
= bs
; curr_bs
->backing_hd
; curr_bs
= curr_bs
->backing_hd
) {
4284 /* If either of the filename paths is actually a protocol, then
4285 * compare unmodified paths; otherwise make paths relative */
4286 if (is_protocol
|| path_has_protocol(curr_bs
->backing_file
)) {
4287 if (strcmp(backing_file
, curr_bs
->backing_file
) == 0) {
4288 retval
= curr_bs
->backing_hd
;
4292 /* If not an absolute filename path, make it relative to the current
4293 * image's filename path */
4294 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
4297 /* We are going to compare absolute pathnames */
4298 if (!realpath(filename_tmp
, filename_full
)) {
4302 /* We need to make sure the backing filename we are comparing against
4303 * is relative to the current image filename (or absolute) */
4304 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
4305 curr_bs
->backing_file
);
4307 if (!realpath(filename_tmp
, backing_file_full
)) {
4311 if (strcmp(backing_file_full
, filename_full
) == 0) {
4312 retval
= curr_bs
->backing_hd
;
4318 g_free(filename_full
);
4319 g_free(backing_file_full
);
4320 g_free(filename_tmp
);
4324 int bdrv_get_backing_file_depth(BlockDriverState
*bs
)
4330 if (!bs
->backing_hd
) {
4334 return 1 + bdrv_get_backing_file_depth(bs
->backing_hd
);
4337 BlockDriverState
*bdrv_find_base(BlockDriverState
*bs
)
4339 BlockDriverState
*curr_bs
= NULL
;
4347 while (curr_bs
->backing_hd
) {
4348 curr_bs
= curr_bs
->backing_hd
;
4353 /**************************************************************/
4356 BlockDriverAIOCB
*bdrv_aio_readv(BlockDriverState
*bs
, int64_t sector_num
,
4357 QEMUIOVector
*qiov
, int nb_sectors
,
4358 BlockDriverCompletionFunc
*cb
, void *opaque
)
4360 trace_bdrv_aio_readv(bs
, sector_num
, nb_sectors
, opaque
);
4362 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, 0,
4366 BlockDriverAIOCB
*bdrv_aio_writev(BlockDriverState
*bs
, int64_t sector_num
,
4367 QEMUIOVector
*qiov
, int nb_sectors
,
4368 BlockDriverCompletionFunc
*cb
, void *opaque
)
4370 trace_bdrv_aio_writev(bs
, sector_num
, nb_sectors
, opaque
);
4372 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, 0,
4376 BlockDriverAIOCB
*bdrv_aio_write_zeroes(BlockDriverState
*bs
,
4377 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
,
4378 BlockDriverCompletionFunc
*cb
, void *opaque
)
4380 trace_bdrv_aio_write_zeroes(bs
, sector_num
, nb_sectors
, flags
, opaque
);
4382 return bdrv_co_aio_rw_vector(bs
, sector_num
, NULL
, nb_sectors
,
4383 BDRV_REQ_ZERO_WRITE
| flags
,
4388 typedef struct MultiwriteCB
{
4393 BlockDriverCompletionFunc
*cb
;
4395 QEMUIOVector
*free_qiov
;
4399 static void multiwrite_user_cb(MultiwriteCB
*mcb
)
4403 for (i
= 0; i
< mcb
->num_callbacks
; i
++) {
4404 mcb
->callbacks
[i
].cb(mcb
->callbacks
[i
].opaque
, mcb
->error
);
4405 if (mcb
->callbacks
[i
].free_qiov
) {
4406 qemu_iovec_destroy(mcb
->callbacks
[i
].free_qiov
);
4408 g_free(mcb
->callbacks
[i
].free_qiov
);
4412 static void multiwrite_cb(void *opaque
, int ret
)
4414 MultiwriteCB
*mcb
= opaque
;
4416 trace_multiwrite_cb(mcb
, ret
);
4418 if (ret
< 0 && !mcb
->error
) {
4422 mcb
->num_requests
--;
4423 if (mcb
->num_requests
== 0) {
4424 multiwrite_user_cb(mcb
);
4429 static int multiwrite_req_compare(const void *a
, const void *b
)
4431 const BlockRequest
*req1
= a
, *req2
= b
;
4434 * Note that we can't simply subtract req2->sector from req1->sector
4435 * here as that could overflow the return value.
4437 if (req1
->sector
> req2
->sector
) {
4439 } else if (req1
->sector
< req2
->sector
) {
4447 * Takes a bunch of requests and tries to merge them. Returns the number of
4448 * requests that remain after merging.
4450 static int multiwrite_merge(BlockDriverState
*bs
, BlockRequest
*reqs
,
4451 int num_reqs
, MultiwriteCB
*mcb
)
4455 // Sort requests by start sector
4456 qsort(reqs
, num_reqs
, sizeof(*reqs
), &multiwrite_req_compare
);
4458 // Check if adjacent requests touch the same clusters. If so, combine them,
4459 // filling up gaps with zero sectors.
4461 for (i
= 1; i
< num_reqs
; i
++) {
4463 int64_t oldreq_last
= reqs
[outidx
].sector
+ reqs
[outidx
].nb_sectors
;
4465 // Handle exactly sequential writes and overlapping writes.
4466 if (reqs
[i
].sector
<= oldreq_last
) {
4470 if (reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1 > IOV_MAX
) {
4476 QEMUIOVector
*qiov
= g_malloc0(sizeof(*qiov
));
4477 qemu_iovec_init(qiov
,
4478 reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1);
4480 // Add the first request to the merged one. If the requests are
4481 // overlapping, drop the last sectors of the first request.
4482 size
= (reqs
[i
].sector
- reqs
[outidx
].sector
) << 9;
4483 qemu_iovec_concat(qiov
, reqs
[outidx
].qiov
, 0, size
);
4485 // We should need to add any zeros between the two requests
4486 assert (reqs
[i
].sector
<= oldreq_last
);
4488 // Add the second request
4489 qemu_iovec_concat(qiov
, reqs
[i
].qiov
, 0, reqs
[i
].qiov
->size
);
4491 reqs
[outidx
].nb_sectors
= qiov
->size
>> 9;
4492 reqs
[outidx
].qiov
= qiov
;
4494 mcb
->callbacks
[i
].free_qiov
= reqs
[outidx
].qiov
;
4497 reqs
[outidx
].sector
= reqs
[i
].sector
;
4498 reqs
[outidx
].nb_sectors
= reqs
[i
].nb_sectors
;
4499 reqs
[outidx
].qiov
= reqs
[i
].qiov
;
4507 * Submit multiple AIO write requests at once.
4509 * On success, the function returns 0 and all requests in the reqs array have
4510 * been submitted. In error case this function returns -1, and any of the
4511 * requests may or may not be submitted yet. In particular, this means that the
4512 * callback will be called for some of the requests, for others it won't. The
4513 * caller must check the error field of the BlockRequest to wait for the right
4514 * callbacks (if error != 0, no callback will be called).
4516 * The implementation may modify the contents of the reqs array, e.g. to merge
4517 * requests. However, the fields opaque and error are left unmodified as they
4518 * are used to signal failure for a single request to the caller.
4520 int bdrv_aio_multiwrite(BlockDriverState
*bs
, BlockRequest
*reqs
, int num_reqs
)
4525 /* don't submit writes if we don't have a medium */
4526 if (bs
->drv
== NULL
) {
4527 for (i
= 0; i
< num_reqs
; i
++) {
4528 reqs
[i
].error
= -ENOMEDIUM
;
4533 if (num_reqs
== 0) {
4537 // Create MultiwriteCB structure
4538 mcb
= g_malloc0(sizeof(*mcb
) + num_reqs
* sizeof(*mcb
->callbacks
));
4539 mcb
->num_requests
= 0;
4540 mcb
->num_callbacks
= num_reqs
;
4542 for (i
= 0; i
< num_reqs
; i
++) {
4543 mcb
->callbacks
[i
].cb
= reqs
[i
].cb
;
4544 mcb
->callbacks
[i
].opaque
= reqs
[i
].opaque
;
4547 // Check for mergable requests
4548 num_reqs
= multiwrite_merge(bs
, reqs
, num_reqs
, mcb
);
4550 trace_bdrv_aio_multiwrite(mcb
, mcb
->num_callbacks
, num_reqs
);
4552 /* Run the aio requests. */
4553 mcb
->num_requests
= num_reqs
;
4554 for (i
= 0; i
< num_reqs
; i
++) {
4555 bdrv_co_aio_rw_vector(bs
, reqs
[i
].sector
, reqs
[i
].qiov
,
4556 reqs
[i
].nb_sectors
, reqs
[i
].flags
,
4564 void bdrv_aio_cancel(BlockDriverAIOCB
*acb
)
4566 acb
->aiocb_info
->cancel(acb
);
4569 /**************************************************************/
4570 /* async block device emulation */
4572 typedef struct BlockDriverAIOCBSync
{
4573 BlockDriverAIOCB common
;
4576 /* vector translation state */
4580 } BlockDriverAIOCBSync
;
4582 static void bdrv_aio_cancel_em(BlockDriverAIOCB
*blockacb
)
4584 BlockDriverAIOCBSync
*acb
=
4585 container_of(blockacb
, BlockDriverAIOCBSync
, common
);
4586 qemu_bh_delete(acb
->bh
);
4588 qemu_aio_release(acb
);
4591 static const AIOCBInfo bdrv_em_aiocb_info
= {
4592 .aiocb_size
= sizeof(BlockDriverAIOCBSync
),
4593 .cancel
= bdrv_aio_cancel_em
,
4596 static void bdrv_aio_bh_cb(void *opaque
)
4598 BlockDriverAIOCBSync
*acb
= opaque
;
4601 qemu_iovec_from_buf(acb
->qiov
, 0, acb
->bounce
, acb
->qiov
->size
);
4602 qemu_vfree(acb
->bounce
);
4603 acb
->common
.cb(acb
->common
.opaque
, acb
->ret
);
4604 qemu_bh_delete(acb
->bh
);
4606 qemu_aio_release(acb
);
4609 static BlockDriverAIOCB
*bdrv_aio_rw_vector(BlockDriverState
*bs
,
4613 BlockDriverCompletionFunc
*cb
,
4618 BlockDriverAIOCBSync
*acb
;
4620 acb
= qemu_aio_get(&bdrv_em_aiocb_info
, bs
, cb
, opaque
);
4621 acb
->is_write
= is_write
;
4623 acb
->bounce
= qemu_blockalign(bs
, qiov
->size
);
4624 acb
->bh
= qemu_bh_new(bdrv_aio_bh_cb
, acb
);
4627 qemu_iovec_to_buf(acb
->qiov
, 0, acb
->bounce
, qiov
->size
);
4628 acb
->ret
= bs
->drv
->bdrv_write(bs
, sector_num
, acb
->bounce
, nb_sectors
);
4630 acb
->ret
= bs
->drv
->bdrv_read(bs
, sector_num
, acb
->bounce
, nb_sectors
);
4633 qemu_bh_schedule(acb
->bh
);
4635 return &acb
->common
;
4638 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
4639 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
4640 BlockDriverCompletionFunc
*cb
, void *opaque
)
4642 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 0);
4645 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
4646 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
4647 BlockDriverCompletionFunc
*cb
, void *opaque
)
4649 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 1);
4653 typedef struct BlockDriverAIOCBCoroutine
{
4654 BlockDriverAIOCB common
;
4659 } BlockDriverAIOCBCoroutine
;
4661 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB
*blockacb
)
4663 BlockDriverAIOCBCoroutine
*acb
=
4664 container_of(blockacb
, BlockDriverAIOCBCoroutine
, common
);
4673 static const AIOCBInfo bdrv_em_co_aiocb_info
= {
4674 .aiocb_size
= sizeof(BlockDriverAIOCBCoroutine
),
4675 .cancel
= bdrv_aio_co_cancel_em
,
4678 static void bdrv_co_em_bh(void *opaque
)
4680 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4682 acb
->common
.cb(acb
->common
.opaque
, acb
->req
.error
);
4688 qemu_bh_delete(acb
->bh
);
4689 qemu_aio_release(acb
);
4692 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4693 static void coroutine_fn
bdrv_co_do_rw(void *opaque
)
4695 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4696 BlockDriverState
*bs
= acb
->common
.bs
;
4698 if (!acb
->is_write
) {
4699 acb
->req
.error
= bdrv_co_do_readv(bs
, acb
->req
.sector
,
4700 acb
->req
.nb_sectors
, acb
->req
.qiov
, acb
->req
.flags
);
4702 acb
->req
.error
= bdrv_co_do_writev(bs
, acb
->req
.sector
,
4703 acb
->req
.nb_sectors
, acb
->req
.qiov
, acb
->req
.flags
);
4706 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
4707 qemu_bh_schedule(acb
->bh
);
4710 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
4714 BdrvRequestFlags flags
,
4715 BlockDriverCompletionFunc
*cb
,
4720 BlockDriverAIOCBCoroutine
*acb
;
4722 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4723 acb
->req
.sector
= sector_num
;
4724 acb
->req
.nb_sectors
= nb_sectors
;
4725 acb
->req
.qiov
= qiov
;
4726 acb
->req
.flags
= flags
;
4727 acb
->is_write
= is_write
;
4730 co
= qemu_coroutine_create(bdrv_co_do_rw
);
4731 qemu_coroutine_enter(co
, acb
);
4733 return &acb
->common
;
4736 static void coroutine_fn
bdrv_aio_flush_co_entry(void *opaque
)
4738 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4739 BlockDriverState
*bs
= acb
->common
.bs
;
4741 acb
->req
.error
= bdrv_co_flush(bs
);
4742 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
4743 qemu_bh_schedule(acb
->bh
);
4746 BlockDriverAIOCB
*bdrv_aio_flush(BlockDriverState
*bs
,
4747 BlockDriverCompletionFunc
*cb
, void *opaque
)
4749 trace_bdrv_aio_flush(bs
, opaque
);
4752 BlockDriverAIOCBCoroutine
*acb
;
4754 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4757 co
= qemu_coroutine_create(bdrv_aio_flush_co_entry
);
4758 qemu_coroutine_enter(co
, acb
);
4760 return &acb
->common
;
4763 static void coroutine_fn
bdrv_aio_discard_co_entry(void *opaque
)
4765 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4766 BlockDriverState
*bs
= acb
->common
.bs
;
4768 acb
->req
.error
= bdrv_co_discard(bs
, acb
->req
.sector
, acb
->req
.nb_sectors
);
4769 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
4770 qemu_bh_schedule(acb
->bh
);
4773 BlockDriverAIOCB
*bdrv_aio_discard(BlockDriverState
*bs
,
4774 int64_t sector_num
, int nb_sectors
,
4775 BlockDriverCompletionFunc
*cb
, void *opaque
)
4778 BlockDriverAIOCBCoroutine
*acb
;
4780 trace_bdrv_aio_discard(bs
, sector_num
, nb_sectors
, opaque
);
4782 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4783 acb
->req
.sector
= sector_num
;
4784 acb
->req
.nb_sectors
= nb_sectors
;
4786 co
= qemu_coroutine_create(bdrv_aio_discard_co_entry
);
4787 qemu_coroutine_enter(co
, acb
);
4789 return &acb
->common
;
4792 void bdrv_init(void)
4794 module_call_init(MODULE_INIT_BLOCK
);
4797 void bdrv_init_with_whitelist(void)
4799 use_bdrv_whitelist
= 1;
4803 void *qemu_aio_get(const AIOCBInfo
*aiocb_info
, BlockDriverState
*bs
,
4804 BlockDriverCompletionFunc
*cb
, void *opaque
)
4806 BlockDriverAIOCB
*acb
;
4808 acb
= g_slice_alloc(aiocb_info
->aiocb_size
);
4809 acb
->aiocb_info
= aiocb_info
;
4812 acb
->opaque
= opaque
;
4816 void qemu_aio_release(void *p
)
4818 BlockDriverAIOCB
*acb
= p
;
4819 g_slice_free1(acb
->aiocb_info
->aiocb_size
, acb
);
4822 /**************************************************************/
4823 /* Coroutine block device emulation */
4825 typedef struct CoroutineIOCompletion
{
4826 Coroutine
*coroutine
;
4828 } CoroutineIOCompletion
;
4830 static void bdrv_co_io_em_complete(void *opaque
, int ret
)
4832 CoroutineIOCompletion
*co
= opaque
;
4835 qemu_coroutine_enter(co
->coroutine
, NULL
);
4838 static int coroutine_fn
bdrv_co_io_em(BlockDriverState
*bs
, int64_t sector_num
,
4839 int nb_sectors
, QEMUIOVector
*iov
,
4842 CoroutineIOCompletion co
= {
4843 .coroutine
= qemu_coroutine_self(),
4845 BlockDriverAIOCB
*acb
;
4848 acb
= bs
->drv
->bdrv_aio_writev(bs
, sector_num
, iov
, nb_sectors
,
4849 bdrv_co_io_em_complete
, &co
);
4851 acb
= bs
->drv
->bdrv_aio_readv(bs
, sector_num
, iov
, nb_sectors
,
4852 bdrv_co_io_em_complete
, &co
);
4855 trace_bdrv_co_io_em(bs
, sector_num
, nb_sectors
, is_write
, acb
);
4859 qemu_coroutine_yield();
4864 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
4865 int64_t sector_num
, int nb_sectors
,
4868 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, false);
4871 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
4872 int64_t sector_num
, int nb_sectors
,
4875 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, true);
4878 static void coroutine_fn
bdrv_flush_co_entry(void *opaque
)
4880 RwCo
*rwco
= opaque
;
4882 rwco
->ret
= bdrv_co_flush(rwco
->bs
);
4885 int coroutine_fn
bdrv_co_flush(BlockDriverState
*bs
)
4889 if (!bs
|| !bdrv_is_inserted(bs
) || bdrv_is_read_only(bs
)) {
4893 /* Write back cached data to the OS even with cache=unsafe */
4894 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_OS
);
4895 if (bs
->drv
->bdrv_co_flush_to_os
) {
4896 ret
= bs
->drv
->bdrv_co_flush_to_os(bs
);
4902 /* But don't actually force it to the disk with cache=unsafe */
4903 if (bs
->open_flags
& BDRV_O_NO_FLUSH
) {
4907 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_DISK
);
4908 if (bs
->drv
->bdrv_co_flush_to_disk
) {
4909 ret
= bs
->drv
->bdrv_co_flush_to_disk(bs
);
4910 } else if (bs
->drv
->bdrv_aio_flush
) {
4911 BlockDriverAIOCB
*acb
;
4912 CoroutineIOCompletion co
= {
4913 .coroutine
= qemu_coroutine_self(),
4916 acb
= bs
->drv
->bdrv_aio_flush(bs
, bdrv_co_io_em_complete
, &co
);
4920 qemu_coroutine_yield();
4925 * Some block drivers always operate in either writethrough or unsafe
4926 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4927 * know how the server works (because the behaviour is hardcoded or
4928 * depends on server-side configuration), so we can't ensure that
4929 * everything is safe on disk. Returning an error doesn't work because
4930 * that would break guests even if the server operates in writethrough
4933 * Let's hope the user knows what he's doing.
4941 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4942 * in the case of cache=unsafe, so there are no useless flushes.
4945 return bdrv_co_flush(bs
->file
);
4948 void bdrv_invalidate_cache(BlockDriverState
*bs
, Error
**errp
)
4950 Error
*local_err
= NULL
;
4957 if (bs
->drv
->bdrv_invalidate_cache
) {
4958 bs
->drv
->bdrv_invalidate_cache(bs
, &local_err
);
4959 } else if (bs
->file
) {
4960 bdrv_invalidate_cache(bs
->file
, &local_err
);
4963 error_propagate(errp
, local_err
);
4967 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
4969 error_setg_errno(errp
, -ret
, "Could not refresh total sector count");
4974 void bdrv_invalidate_cache_all(Error
**errp
)
4976 BlockDriverState
*bs
;
4977 Error
*local_err
= NULL
;
4979 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
4980 bdrv_invalidate_cache(bs
, &local_err
);
4982 error_propagate(errp
, local_err
);
4988 void bdrv_clear_incoming_migration_all(void)
4990 BlockDriverState
*bs
;
4992 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
4993 bs
->open_flags
= bs
->open_flags
& ~(BDRV_O_INCOMING
);
4997 int bdrv_flush(BlockDriverState
*bs
)
5005 if (qemu_in_coroutine()) {
5006 /* Fast-path if already in coroutine context */
5007 bdrv_flush_co_entry(&rwco
);
5009 co
= qemu_coroutine_create(bdrv_flush_co_entry
);
5010 qemu_coroutine_enter(co
, &rwco
);
5011 while (rwco
.ret
== NOT_DONE
) {
5019 typedef struct DiscardCo
{
5020 BlockDriverState
*bs
;
5025 static void coroutine_fn
bdrv_discard_co_entry(void *opaque
)
5027 DiscardCo
*rwco
= opaque
;
5029 rwco
->ret
= bdrv_co_discard(rwco
->bs
, rwco
->sector_num
, rwco
->nb_sectors
);
5032 /* if no limit is specified in the BlockLimits use a default
5033 * of 32768 512-byte sectors (16 MiB) per request.
5035 #define MAX_DISCARD_DEFAULT 32768
5037 int coroutine_fn
bdrv_co_discard(BlockDriverState
*bs
, int64_t sector_num
,
5044 } else if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
5046 } else if (bs
->read_only
) {
5050 bdrv_reset_dirty(bs
, sector_num
, nb_sectors
);
5052 /* Do nothing if disabled. */
5053 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
5057 if (!bs
->drv
->bdrv_co_discard
&& !bs
->drv
->bdrv_aio_discard
) {
5061 max_discard
= bs
->bl
.max_discard
? bs
->bl
.max_discard
: MAX_DISCARD_DEFAULT
;
5062 while (nb_sectors
> 0) {
5064 int num
= nb_sectors
;
5067 if (bs
->bl
.discard_alignment
&&
5068 num
>= bs
->bl
.discard_alignment
&&
5069 sector_num
% bs
->bl
.discard_alignment
) {
5070 if (num
> bs
->bl
.discard_alignment
) {
5071 num
= bs
->bl
.discard_alignment
;
5073 num
-= sector_num
% bs
->bl
.discard_alignment
;
5076 /* limit request size */
5077 if (num
> max_discard
) {
5081 if (bs
->drv
->bdrv_co_discard
) {
5082 ret
= bs
->drv
->bdrv_co_discard(bs
, sector_num
, num
);
5084 BlockDriverAIOCB
*acb
;
5085 CoroutineIOCompletion co
= {
5086 .coroutine
= qemu_coroutine_self(),
5089 acb
= bs
->drv
->bdrv_aio_discard(bs
, sector_num
, nb_sectors
,
5090 bdrv_co_io_em_complete
, &co
);
5094 qemu_coroutine_yield();
5098 if (ret
&& ret
!= -ENOTSUP
) {
5108 int bdrv_discard(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
)
5113 .sector_num
= sector_num
,
5114 .nb_sectors
= nb_sectors
,
5118 if (qemu_in_coroutine()) {
5119 /* Fast-path if already in coroutine context */
5120 bdrv_discard_co_entry(&rwco
);
5122 co
= qemu_coroutine_create(bdrv_discard_co_entry
);
5123 qemu_coroutine_enter(co
, &rwco
);
5124 while (rwco
.ret
== NOT_DONE
) {
5132 /**************************************************************/
5133 /* removable device support */
5136 * Return TRUE if the media is present
5138 int bdrv_is_inserted(BlockDriverState
*bs
)
5140 BlockDriver
*drv
= bs
->drv
;
5144 if (!drv
->bdrv_is_inserted
)
5146 return drv
->bdrv_is_inserted(bs
);
5150 * Return whether the media changed since the last call to this
5151 * function, or -ENOTSUP if we don't know. Most drivers don't know.
5153 int bdrv_media_changed(BlockDriverState
*bs
)
5155 BlockDriver
*drv
= bs
->drv
;
5157 if (drv
&& drv
->bdrv_media_changed
) {
5158 return drv
->bdrv_media_changed(bs
);
5164 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5166 void bdrv_eject(BlockDriverState
*bs
, bool eject_flag
)
5168 BlockDriver
*drv
= bs
->drv
;
5170 if (drv
&& drv
->bdrv_eject
) {
5171 drv
->bdrv_eject(bs
, eject_flag
);
5174 if (bs
->device_name
[0] != '\0') {
5175 bdrv_emit_qmp_eject_event(bs
, eject_flag
);
5180 * Lock or unlock the media (if it is locked, the user won't be able
5181 * to eject it manually).
5183 void bdrv_lock_medium(BlockDriverState
*bs
, bool locked
)
5185 BlockDriver
*drv
= bs
->drv
;
5187 trace_bdrv_lock_medium(bs
, locked
);
5189 if (drv
&& drv
->bdrv_lock_medium
) {
5190 drv
->bdrv_lock_medium(bs
, locked
);
5194 /* needed for generic scsi interface */
5196 int bdrv_ioctl(BlockDriverState
*bs
, unsigned long int req
, void *buf
)
5198 BlockDriver
*drv
= bs
->drv
;
5200 if (drv
&& drv
->bdrv_ioctl
)
5201 return drv
->bdrv_ioctl(bs
, req
, buf
);
5205 BlockDriverAIOCB
*bdrv_aio_ioctl(BlockDriverState
*bs
,
5206 unsigned long int req
, void *buf
,
5207 BlockDriverCompletionFunc
*cb
, void *opaque
)
5209 BlockDriver
*drv
= bs
->drv
;
5211 if (drv
&& drv
->bdrv_aio_ioctl
)
5212 return drv
->bdrv_aio_ioctl(bs
, req
, buf
, cb
, opaque
);
5216 void bdrv_set_guest_block_size(BlockDriverState
*bs
, int align
)
5218 bs
->guest_block_size
= align
;
5221 void *qemu_blockalign(BlockDriverState
*bs
, size_t size
)
5223 return qemu_memalign(bdrv_opt_mem_align(bs
), size
);
5227 * Check if all memory in this vector is sector aligned.
5229 bool bdrv_qiov_is_aligned(BlockDriverState
*bs
, QEMUIOVector
*qiov
)
5232 size_t alignment
= bdrv_opt_mem_align(bs
);
5234 for (i
= 0; i
< qiov
->niov
; i
++) {
5235 if ((uintptr_t) qiov
->iov
[i
].iov_base
% alignment
) {
5238 if (qiov
->iov
[i
].iov_len
% alignment
) {
5246 BdrvDirtyBitmap
*bdrv_create_dirty_bitmap(BlockDriverState
*bs
, int granularity
,
5249 int64_t bitmap_size
;
5250 BdrvDirtyBitmap
*bitmap
;
5252 assert((granularity
& (granularity
- 1)) == 0);
5254 granularity
>>= BDRV_SECTOR_BITS
;
5255 assert(granularity
);
5256 bitmap_size
= bdrv_getlength(bs
);
5257 if (bitmap_size
< 0) {
5258 error_setg_errno(errp
, -bitmap_size
, "could not get length of device");
5259 errno
= -bitmap_size
;
5262 bitmap_size
>>= BDRV_SECTOR_BITS
;
5263 bitmap
= g_malloc0(sizeof(BdrvDirtyBitmap
));
5264 bitmap
->bitmap
= hbitmap_alloc(bitmap_size
, ffs(granularity
) - 1);
5265 QLIST_INSERT_HEAD(&bs
->dirty_bitmaps
, bitmap
, list
);
5269 void bdrv_release_dirty_bitmap(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
5271 BdrvDirtyBitmap
*bm
, *next
;
5272 QLIST_FOREACH_SAFE(bm
, &bs
->dirty_bitmaps
, list
, next
) {
5274 QLIST_REMOVE(bitmap
, list
);
5275 hbitmap_free(bitmap
->bitmap
);
5282 BlockDirtyInfoList
*bdrv_query_dirty_bitmaps(BlockDriverState
*bs
)
5284 BdrvDirtyBitmap
*bm
;
5285 BlockDirtyInfoList
*list
= NULL
;
5286 BlockDirtyInfoList
**plist
= &list
;
5288 QLIST_FOREACH(bm
, &bs
->dirty_bitmaps
, list
) {
5289 BlockDirtyInfo
*info
= g_malloc0(sizeof(BlockDirtyInfo
));
5290 BlockDirtyInfoList
*entry
= g_malloc0(sizeof(BlockDirtyInfoList
));
5291 info
->count
= bdrv_get_dirty_count(bs
, bm
);
5293 ((int64_t) BDRV_SECTOR_SIZE
<< hbitmap_granularity(bm
->bitmap
));
5294 entry
->value
= info
;
5296 plist
= &entry
->next
;
5302 int bdrv_get_dirty(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
, int64_t sector
)
5305 return hbitmap_get(bitmap
->bitmap
, sector
);
5311 void bdrv_dirty_iter_init(BlockDriverState
*bs
,
5312 BdrvDirtyBitmap
*bitmap
, HBitmapIter
*hbi
)
5314 hbitmap_iter_init(hbi
, bitmap
->bitmap
, 0);
5317 void bdrv_set_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
5320 BdrvDirtyBitmap
*bitmap
;
5321 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
5322 hbitmap_set(bitmap
->bitmap
, cur_sector
, nr_sectors
);
5326 void bdrv_reset_dirty(BlockDriverState
*bs
, int64_t cur_sector
, int nr_sectors
)
5328 BdrvDirtyBitmap
*bitmap
;
5329 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
5330 hbitmap_reset(bitmap
->bitmap
, cur_sector
, nr_sectors
);
5334 int64_t bdrv_get_dirty_count(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
5336 return hbitmap_count(bitmap
->bitmap
);
5339 /* Get a reference to bs */
5340 void bdrv_ref(BlockDriverState
*bs
)
5345 /* Release a previously grabbed reference to bs.
5346 * If after releasing, reference count is zero, the BlockDriverState is
5348 void bdrv_unref(BlockDriverState
*bs
)
5350 assert(bs
->refcnt
> 0);
5351 if (--bs
->refcnt
== 0) {
5356 struct BdrvOpBlocker
{
5358 QLIST_ENTRY(BdrvOpBlocker
) list
;
5361 bool bdrv_op_is_blocked(BlockDriverState
*bs
, BlockOpType op
, Error
**errp
)
5363 BdrvOpBlocker
*blocker
;
5364 assert((int) op
>= 0 && op
< BLOCK_OP_TYPE_MAX
);
5365 if (!QLIST_EMPTY(&bs
->op_blockers
[op
])) {
5366 blocker
= QLIST_FIRST(&bs
->op_blockers
[op
]);
5368 error_setg(errp
, "Device '%s' is busy: %s",
5369 bs
->device_name
, error_get_pretty(blocker
->reason
));
5376 void bdrv_op_block(BlockDriverState
*bs
, BlockOpType op
, Error
*reason
)
5378 BdrvOpBlocker
*blocker
;
5379 assert((int) op
>= 0 && op
< BLOCK_OP_TYPE_MAX
);
5381 blocker
= g_malloc0(sizeof(BdrvOpBlocker
));
5382 blocker
->reason
= reason
;
5383 QLIST_INSERT_HEAD(&bs
->op_blockers
[op
], blocker
, list
);
5386 void bdrv_op_unblock(BlockDriverState
*bs
, BlockOpType op
, Error
*reason
)
5388 BdrvOpBlocker
*blocker
, *next
;
5389 assert((int) op
>= 0 && op
< BLOCK_OP_TYPE_MAX
);
5390 QLIST_FOREACH_SAFE(blocker
, &bs
->op_blockers
[op
], list
, next
) {
5391 if (blocker
->reason
== reason
) {
5392 QLIST_REMOVE(blocker
, list
);
5398 void bdrv_op_block_all(BlockDriverState
*bs
, Error
*reason
)
5401 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
5402 bdrv_op_block(bs
, i
, reason
);
5406 void bdrv_op_unblock_all(BlockDriverState
*bs
, Error
*reason
)
5409 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
5410 bdrv_op_unblock(bs
, i
, reason
);
5414 bool bdrv_op_blocker_is_empty(BlockDriverState
*bs
)
5418 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
5419 if (!QLIST_EMPTY(&bs
->op_blockers
[i
])) {
5426 void bdrv_iostatus_enable(BlockDriverState
*bs
)
5428 bs
->iostatus_enabled
= true;
5429 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
5432 /* The I/O status is only enabled if the drive explicitly
5433 * enables it _and_ the VM is configured to stop on errors */
5434 bool bdrv_iostatus_is_enabled(const BlockDriverState
*bs
)
5436 return (bs
->iostatus_enabled
&&
5437 (bs
->on_write_error
== BLOCKDEV_ON_ERROR_ENOSPC
||
5438 bs
->on_write_error
== BLOCKDEV_ON_ERROR_STOP
||
5439 bs
->on_read_error
== BLOCKDEV_ON_ERROR_STOP
));
5442 void bdrv_iostatus_disable(BlockDriverState
*bs
)
5444 bs
->iostatus_enabled
= false;
5447 void bdrv_iostatus_reset(BlockDriverState
*bs
)
5449 if (bdrv_iostatus_is_enabled(bs
)) {
5450 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
5452 block_job_iostatus_reset(bs
->job
);
5457 void bdrv_iostatus_set_err(BlockDriverState
*bs
, int error
)
5459 assert(bdrv_iostatus_is_enabled(bs
));
5460 if (bs
->iostatus
== BLOCK_DEVICE_IO_STATUS_OK
) {
5461 bs
->iostatus
= error
== ENOSPC
? BLOCK_DEVICE_IO_STATUS_NOSPACE
:
5462 BLOCK_DEVICE_IO_STATUS_FAILED
;
5467 bdrv_acct_start(BlockDriverState
*bs
, BlockAcctCookie
*cookie
, int64_t bytes
,
5468 enum BlockAcctType type
)
5470 assert(type
< BDRV_MAX_IOTYPE
);
5472 cookie
->bytes
= bytes
;
5473 cookie
->start_time_ns
= get_clock();
5474 cookie
->type
= type
;
5478 bdrv_acct_done(BlockDriverState
*bs
, BlockAcctCookie
*cookie
)
5480 assert(cookie
->type
< BDRV_MAX_IOTYPE
);
5482 bs
->nr_bytes
[cookie
->type
] += cookie
->bytes
;
5483 bs
->nr_ops
[cookie
->type
]++;
5484 bs
->total_time_ns
[cookie
->type
] += get_clock() - cookie
->start_time_ns
;
5487 void bdrv_img_create(const char *filename
, const char *fmt
,
5488 const char *base_filename
, const char *base_fmt
,
5489 char *options
, uint64_t img_size
, int flags
,
5490 Error
**errp
, bool quiet
)
5492 QEMUOptionParameter
*param
= NULL
, *create_options
= NULL
;
5493 QEMUOptionParameter
*backing_fmt
, *backing_file
, *size
;
5494 BlockDriver
*drv
, *proto_drv
;
5495 BlockDriver
*backing_drv
= NULL
;
5496 Error
*local_err
= NULL
;
5499 /* Find driver and parse its options */
5500 drv
= bdrv_find_format(fmt
);
5502 error_setg(errp
, "Unknown file format '%s'", fmt
);
5506 proto_drv
= bdrv_find_protocol(filename
, true);
5508 error_setg(errp
, "Unknown protocol '%s'", filename
);
5512 create_options
= append_option_parameters(create_options
,
5513 drv
->create_options
);
5514 create_options
= append_option_parameters(create_options
,
5515 proto_drv
->create_options
);
5517 /* Create parameter list with default values */
5518 param
= parse_option_parameters("", create_options
, param
);
5520 set_option_parameter_int(param
, BLOCK_OPT_SIZE
, img_size
);
5522 /* Parse -o options */
5524 param
= parse_option_parameters(options
, create_options
, param
);
5525 if (param
== NULL
) {
5526 error_setg(errp
, "Invalid options for file format '%s'.", fmt
);
5531 if (base_filename
) {
5532 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FILE
,
5534 error_setg(errp
, "Backing file not supported for file format '%s'",
5541 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FMT
, base_fmt
)) {
5542 error_setg(errp
, "Backing file format not supported for file "
5543 "format '%s'", fmt
);
5548 backing_file
= get_option_parameter(param
, BLOCK_OPT_BACKING_FILE
);
5549 if (backing_file
&& backing_file
->value
.s
) {
5550 if (!strcmp(filename
, backing_file
->value
.s
)) {
5551 error_setg(errp
, "Error: Trying to create an image with the "
5552 "same filename as the backing file");
5557 backing_fmt
= get_option_parameter(param
, BLOCK_OPT_BACKING_FMT
);
5558 if (backing_fmt
&& backing_fmt
->value
.s
) {
5559 backing_drv
= bdrv_find_format(backing_fmt
->value
.s
);
5561 error_setg(errp
, "Unknown backing file format '%s'",
5562 backing_fmt
->value
.s
);
5567 // The size for the image must always be specified, with one exception:
5568 // If we are using a backing file, we can obtain the size from there
5569 size
= get_option_parameter(param
, BLOCK_OPT_SIZE
);
5570 if (size
&& size
->value
.n
== -1) {
5571 if (backing_file
&& backing_file
->value
.s
) {
5572 BlockDriverState
*bs
;
5577 /* backing files always opened read-only */
5579 flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
5582 ret
= bdrv_open(&bs
, backing_file
->value
.s
, NULL
, NULL
, back_flags
,
5583 backing_drv
, &local_err
);
5585 error_setg_errno(errp
, -ret
, "Could not open '%s': %s",
5586 backing_file
->value
.s
,
5587 error_get_pretty(local_err
));
5588 error_free(local_err
);
5592 bdrv_get_geometry(bs
, &size
);
5595 snprintf(buf
, sizeof(buf
), "%" PRId64
, size
);
5596 set_option_parameter(param
, BLOCK_OPT_SIZE
, buf
);
5600 error_setg(errp
, "Image creation needs a size parameter");
5606 printf("Formatting '%s', fmt=%s ", filename
, fmt
);
5607 print_option_parameters(param
);
5610 ret
= bdrv_create(drv
, filename
, param
, &local_err
);
5611 if (ret
== -EFBIG
) {
5612 /* This is generally a better message than whatever the driver would
5613 * deliver (especially because of the cluster_size_hint), since that
5614 * is most probably not much different from "image too large". */
5615 const char *cluster_size_hint
= "";
5616 if (get_option_parameter(create_options
, BLOCK_OPT_CLUSTER_SIZE
)) {
5617 cluster_size_hint
= " (try using a larger cluster size)";
5619 error_setg(errp
, "The image size is too large for file format '%s'"
5620 "%s", fmt
, cluster_size_hint
);
5621 error_free(local_err
);
5626 free_option_parameters(create_options
);
5627 free_option_parameters(param
);
5630 error_propagate(errp
, local_err
);
5634 AioContext
*bdrv_get_aio_context(BlockDriverState
*bs
)
5636 /* Currently BlockDriverState always uses the main loop AioContext */
5637 return qemu_get_aio_context();
5640 void bdrv_add_before_write_notifier(BlockDriverState
*bs
,
5641 NotifierWithReturn
*notifier
)
5643 notifier_with_return_list_add(&bs
->before_write_notifiers
, notifier
);
5646 int bdrv_amend_options(BlockDriverState
*bs
, QEMUOptionParameter
*options
)
5648 if (bs
->drv
->bdrv_amend_options
== NULL
) {
5651 return bs
->drv
->bdrv_amend_options(bs
, options
);
5654 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5655 * of block filter and by bdrv_is_first_non_filter.
5656 * It is used to test if the given bs is the candidate or recurse more in the
5659 bool bdrv_recurse_is_first_non_filter(BlockDriverState
*bs
,
5660 BlockDriverState
*candidate
)
5662 /* return false if basic checks fails */
5663 if (!bs
|| !bs
->drv
) {
5667 /* the code reached a non block filter driver -> check if the bs is
5668 * the same as the candidate. It's the recursion termination condition.
5670 if (!bs
->drv
->is_filter
) {
5671 return bs
== candidate
;
5673 /* Down this path the driver is a block filter driver */
5675 /* If the block filter recursion method is defined use it to recurse down
5678 if (bs
->drv
->bdrv_recurse_is_first_non_filter
) {
5679 return bs
->drv
->bdrv_recurse_is_first_non_filter(bs
, candidate
);
5682 /* the driver is a block filter but don't allow to recurse -> return false
5687 /* This function checks if the candidate is the first non filter bs down it's
5688 * bs chain. Since we don't have pointers to parents it explore all bs chains
5689 * from the top. Some filters can choose not to pass down the recursion.
5691 bool bdrv_is_first_non_filter(BlockDriverState
*candidate
)
5693 BlockDriverState
*bs
;
5695 /* walk down the bs forest recursively */
5696 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
5699 /* try to recurse in this top level bs */
5700 perm
= bdrv_recurse_is_first_non_filter(bs
, candidate
);
5702 /* candidate is the first non filter */