2 * CFI parallel flash with Intel command set emulation
4 * Copyright (c) 2006 Thorsten Zitterell
5 * Copyright (c) 2005 Jocelyn Mayer
7 * This library is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU Lesser General Public
9 * License as published by the Free Software Foundation; either
10 * version 2 of the License, or (at your option) any later version.
12 * This library is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * Lesser General Public License for more details.
17 * You should have received a copy of the GNU Lesser General Public
18 * License along with this library; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 * For now, this code can emulate flashes of 1, 2 or 4 bytes width.
24 * Supported commands/modes are:
31 * It does not support timings
32 * It does not support flash interleaving
33 * It does not implement software data protection as found in many real chips
34 * It does not implement erase suspend/resume commands
35 * It does not implement multiple sectors erase
37 * It does not implement much more ...
43 #include "qemu-timer.h"
45 #define PFLASH_BUG(fmt, args...) \
47 printf("PFLASH: Possible BUG - " fmt, ##args); \
51 /* #define PFLASH_DEBUG */
53 #define DPRINTF(fmt, args...) \
55 printf("PFLASH: " fmt , ##args); \
58 #define DPRINTF(fmt, args...) do { } while (0)
64 target_ulong sector_len
;
65 target_ulong total_len
;
67 int wcycle
; /* if 0, the flash is read normally */
74 uint8_t cfi_table
[0x52];
82 static void pflash_timer (void *opaque
)
84 pflash_t
*pfl
= opaque
;
86 DPRINTF("%s: command %02x done\n", __func__
, pfl
->cmd
);
92 cpu_register_physical_memory(pfl
->base
, pfl
->total_len
,
93 pfl
->off
| IO_MEM_ROMD
| pfl
->fl_mem
);
99 static uint32_t pflash_read (pflash_t
*pfl
, target_ulong offset
, int width
)
106 boff
= offset
& 0xFF; /* why this here ?? */
110 else if (pfl
->width
== 4)
113 DPRINTF("%s: reading offset " TARGET_FMT_lx
" under cmd %02x width %d\n",
114 __func__
, offset
, pfl
->cmd
, width
);
118 /* Flash area read */
123 DPRINTF("%s: data offset " TARGET_FMT_lx
" %02x\n",
124 __func__
, offset
, ret
);
127 #if defined(TARGET_WORDS_BIGENDIAN)
128 ret
= p
[offset
] << 8;
129 ret
|= p
[offset
+ 1];
132 ret
|= p
[offset
+ 1] << 8;
134 DPRINTF("%s: data offset " TARGET_FMT_lx
" %04x\n",
135 __func__
, offset
, ret
);
138 #if defined(TARGET_WORDS_BIGENDIAN)
139 ret
= p
[offset
] << 24;
140 ret
|= p
[offset
+ 1] << 16;
141 ret
|= p
[offset
+ 2] << 8;
142 ret
|= p
[offset
+ 3];
145 ret
|= p
[offset
+ 1] << 8;
146 ret
|= p
[offset
+ 1] << 8;
147 ret
|= p
[offset
+ 2] << 16;
148 ret
|= p
[offset
+ 3] << 24;
150 DPRINTF("%s: data offset " TARGET_FMT_lx
" %08x\n",
151 __func__
, offset
, ret
);
154 DPRINTF("BUG in %s\n", __func__
);
158 case 0x20: /* Block erase */
159 case 0x50: /* Clear status register */
160 case 0x60: /* Block /un)lock */
161 case 0x70: /* Status Register */
162 case 0xe8: /* Write block */
163 /* Status register read */
165 DPRINTF("%s: status %x\n", __func__
, ret
);
167 case 0x98: /* Query mode */
168 if (boff
> pfl
->cfi_len
)
171 ret
= pfl
->cfi_table
[boff
];
174 /* This should never happen : reset state & treat it as a read */
175 DPRINTF("%s: unknown command state: %x\n", __func__
, pfl
->cmd
);
182 /* update flash content on disk */
183 static void pflash_update(pflash_t
*pfl
, int offset
,
188 offset_end
= offset
+ size
;
189 /* round to sectors */
190 offset
= offset
>> 9;
191 offset_end
= (offset_end
+ 511) >> 9;
192 bdrv_write(pfl
->bs
, offset
, pfl
->storage
+ (offset
<< 9),
193 offset_end
- offset
);
197 static void inline pflash_data_write(pflash_t
*pfl
, target_ulong offset
,
198 uint32_t value
, int width
)
200 uint8_t *p
= pfl
->storage
;
202 DPRINTF("%s: block write offset " TARGET_FMT_lx
203 " value %x counter " TARGET_FMT_lx
"\n",
204 __func__
, offset
, value
, pfl
->counter
);
208 pflash_update(pfl
, offset
, 1);
211 #if defined(TARGET_WORDS_BIGENDIAN)
212 p
[offset
] = value
>> 8;
213 p
[offset
+ 1] = value
;
216 p
[offset
+ 1] = value
>> 8;
218 pflash_update(pfl
, offset
, 2);
221 #if defined(TARGET_WORDS_BIGENDIAN)
222 p
[offset
] = value
>> 24;
223 p
[offset
+ 1] = value
>> 16;
224 p
[offset
+ 2] = value
>> 8;
225 p
[offset
+ 3] = value
;
228 p
[offset
+ 1] = value
>> 8;
229 p
[offset
+ 2] = value
>> 16;
230 p
[offset
+ 3] = value
>> 24;
232 pflash_update(pfl
, offset
, 4);
238 static void pflash_write (pflash_t
*pfl
, target_ulong offset
, uint32_t value
,
247 DPRINTF("%s: writing offset " TARGET_FMT_lx
" value %08x width %d wcycle 0x%x\n",
248 __func__
, offset
, value
, width
, pfl
->wcycle
);
250 /* Set the device in I/O access mode */
251 cpu_register_physical_memory(pfl
->base
, pfl
->total_len
, pfl
->fl_mem
);
252 boff
= offset
& (pfl
->sector_len
- 1);
256 else if (pfl
->width
== 4)
259 switch (pfl
->wcycle
) {
265 case 0x10: /* Single Byte Program */
266 case 0x40: /* Single Byte Program */
267 DPRINTF(stderr
, "%s: Single Byte Program\n", __func__
);
269 case 0x20: /* Block erase */
271 offset
&= ~(pfl
->sector_len
- 1);
273 DPRINTF("%s: block erase at " TARGET_FMT_lx
" bytes "
275 __func__
, offset
, pfl
->sector_len
);
277 memset(p
+ offset
, 0xff, pfl
->sector_len
);
278 pflash_update(pfl
, offset
, pfl
->sector_len
);
279 pfl
->status
|= 0x80; /* Ready! */
281 case 0x50: /* Clear status bits */
282 DPRINTF("%s: Clear status bits\n", __func__
);
285 case 0x60: /* Block (un)lock */
286 DPRINTF("%s: Block unlock\n", __func__
);
288 case 0x70: /* Status Register */
289 DPRINTF("%s: Read status register\n", __func__
);
292 case 0x98: /* CFI query */
293 DPRINTF("%s: CFI query\n", __func__
);
295 case 0xe8: /* Write to buffer */
296 DPRINTF("%s: Write to buffer\n", __func__
);
297 pfl
->status
|= 0x80; /* Ready! */
299 case 0xff: /* Read array mode */
300 DPRINTF("%s: Read array mode\n", __func__
);
310 case 0x10: /* Single Byte Program */
311 case 0x40: /* Single Byte Program */
312 DPRINTF("%s: Single Byte Program\n", __func__
);
313 pflash_data_write(pfl
, offset
, value
, width
);
314 pfl
->status
|= 0x80; /* Ready! */
317 case 0x20: /* Block erase */
319 if (cmd
== 0xd0) { /* confirm */
322 } else if (cmd
== 0xff) { /* read array mode */
329 DPRINTF("%s: block write of %x bytes\n", __func__
, value
);
330 pfl
->counter
= value
;
337 } else if (cmd
== 0x01) {
340 } else if (cmd
== 0xff) {
343 DPRINTF("%s: Unknown (un)locking command\n", __func__
);
351 DPRINTF("%s: leaving query mode\n", __func__
);
360 case 0xe8: /* Block write */
361 pflash_data_write(pfl
, offset
, value
, width
);
366 DPRINTF("%s: block write finished\n", __func__
);
376 case 3: /* Confirm mode */
378 case 0xe8: /* Block write */
383 DPRINTF("%s: unknown command for \"write block\"\n", __func__
);
384 PFLASH_BUG("Write block confirm");
393 /* Should never happen */
394 DPRINTF("%s: invalid write state\n", __func__
);
400 printf("%s: Unimplemented flash cmd sequence "
401 "(offset " TARGET_FMT_lx
", wcycle 0x%x cmd 0x%x value 0x%x)\n",
402 __func__
, offset
, pfl
->wcycle
, pfl
->cmd
, value
);
405 cpu_register_physical_memory(pfl
->base
, pfl
->total_len
,
406 pfl
->off
| IO_MEM_ROMD
| pfl
->fl_mem
);
415 static uint32_t pflash_readb (void *opaque
, target_phys_addr_t addr
)
417 return pflash_read(opaque
, addr
, 1);
420 static uint32_t pflash_readw (void *opaque
, target_phys_addr_t addr
)
422 pflash_t
*pfl
= opaque
;
424 return pflash_read(pfl
, addr
, 2);
427 static uint32_t pflash_readl (void *opaque
, target_phys_addr_t addr
)
429 pflash_t
*pfl
= opaque
;
431 return pflash_read(pfl
, addr
, 4);
434 static void pflash_writeb (void *opaque
, target_phys_addr_t addr
,
437 pflash_write(opaque
, addr
, value
, 1);
440 static void pflash_writew (void *opaque
, target_phys_addr_t addr
,
443 pflash_t
*pfl
= opaque
;
445 pflash_write(pfl
, addr
, value
, 2);
448 static void pflash_writel (void *opaque
, target_phys_addr_t addr
,
451 pflash_t
*pfl
= opaque
;
453 pflash_write(pfl
, addr
, value
, 4);
456 static CPUWriteMemoryFunc
*pflash_write_ops
[] = {
462 static CPUReadMemoryFunc
*pflash_read_ops
[] = {
468 /* Count trailing zeroes of a 32 bits quantity */
469 static int ctz32 (uint32_t n
)
494 #if 0 /* This is not necessary as n is never 0 */
502 pflash_t
*pflash_cfi01_register(target_phys_addr_t base
, ram_addr_t off
,
503 BlockDriverState
*bs
, uint32_t sector_len
,
504 int nb_blocs
, int width
,
505 uint16_t id0
, uint16_t id1
,
506 uint16_t id2
, uint16_t id3
)
509 target_long total_len
;
511 total_len
= sector_len
* nb_blocs
;
513 /* XXX: to be fixed */
515 if (total_len
!= (8 * 1024 * 1024) && total_len
!= (16 * 1024 * 1024) &&
516 total_len
!= (32 * 1024 * 1024) && total_len
!= (64 * 1024 * 1024))
520 pfl
= qemu_mallocz(sizeof(pflash_t
));
524 pfl
->storage
= phys_ram_base
+ off
;
525 pfl
->fl_mem
= cpu_register_io_memory(0,
526 pflash_read_ops
, pflash_write_ops
, pfl
);
528 cpu_register_physical_memory(base
, total_len
,
529 off
| pfl
->fl_mem
| IO_MEM_ROMD
);
533 /* read the initial flash content */
534 bdrv_read(pfl
->bs
, 0, pfl
->storage
, total_len
>> 9);
536 #if 0 /* XXX: there should be a bit to set up read-only,
537 * the same way the hardware does (with WP pin).
543 pfl
->timer
= qemu_new_timer(vm_clock
, pflash_timer
, pfl
);
545 pfl
->sector_len
= sector_len
;
546 pfl
->total_len
= total_len
;
555 /* Hardcoded CFI table */
557 /* Standard "QRY" string */
558 pfl
->cfi_table
[0x10] = 'Q';
559 pfl
->cfi_table
[0x11] = 'R';
560 pfl
->cfi_table
[0x12] = 'Y';
561 /* Command set (Intel) */
562 pfl
->cfi_table
[0x13] = 0x01;
563 pfl
->cfi_table
[0x14] = 0x00;
564 /* Primary extended table address (none) */
565 pfl
->cfi_table
[0x15] = 0x31;
566 pfl
->cfi_table
[0x16] = 0x00;
567 /* Alternate command set (none) */
568 pfl
->cfi_table
[0x17] = 0x00;
569 pfl
->cfi_table
[0x18] = 0x00;
570 /* Alternate extended table (none) */
571 pfl
->cfi_table
[0x19] = 0x00;
572 pfl
->cfi_table
[0x1A] = 0x00;
574 pfl
->cfi_table
[0x1B] = 0x45;
576 pfl
->cfi_table
[0x1C] = 0x55;
577 /* Vpp min (no Vpp pin) */
578 pfl
->cfi_table
[0x1D] = 0x00;
579 /* Vpp max (no Vpp pin) */
580 pfl
->cfi_table
[0x1E] = 0x00;
582 pfl
->cfi_table
[0x1F] = 0x07;
583 /* Timeout for min size buffer write */
584 pfl
->cfi_table
[0x20] = 0x07;
585 /* Typical timeout for block erase */
586 pfl
->cfi_table
[0x21] = 0x0a;
587 /* Typical timeout for full chip erase (4096 ms) */
588 pfl
->cfi_table
[0x22] = 0x00;
590 pfl
->cfi_table
[0x23] = 0x04;
591 /* Max timeout for buffer write */
592 pfl
->cfi_table
[0x24] = 0x04;
593 /* Max timeout for block erase */
594 pfl
->cfi_table
[0x25] = 0x04;
595 /* Max timeout for chip erase */
596 pfl
->cfi_table
[0x26] = 0x00;
598 pfl
->cfi_table
[0x27] = ctz32(total_len
); // + 1;
599 /* Flash device interface (8 & 16 bits) */
600 pfl
->cfi_table
[0x28] = 0x02;
601 pfl
->cfi_table
[0x29] = 0x00;
602 /* Max number of bytes in multi-bytes write */
603 pfl
->cfi_table
[0x2A] = 0x0B;
604 pfl
->cfi_table
[0x2B] = 0x00;
605 /* Number of erase block regions (uniform) */
606 pfl
->cfi_table
[0x2C] = 0x01;
607 /* Erase block region 1 */
608 pfl
->cfi_table
[0x2D] = nb_blocs
- 1;
609 pfl
->cfi_table
[0x2E] = (nb_blocs
- 1) >> 8;
610 pfl
->cfi_table
[0x2F] = sector_len
>> 8;
611 pfl
->cfi_table
[0x30] = sector_len
>> 16;
614 pfl
->cfi_table
[0x31] = 'P';
615 pfl
->cfi_table
[0x32] = 'R';
616 pfl
->cfi_table
[0x33] = 'I';
618 pfl
->cfi_table
[0x34] = '1';
619 pfl
->cfi_table
[0x35] = '1';
621 pfl
->cfi_table
[0x36] = 0x00;
622 pfl
->cfi_table
[0x37] = 0x00;
623 pfl
->cfi_table
[0x38] = 0x00;
624 pfl
->cfi_table
[0x39] = 0x00;
626 pfl
->cfi_table
[0x3a] = 0x00;
628 pfl
->cfi_table
[0x3b] = 0x00;
629 pfl
->cfi_table
[0x3c] = 0x00;