target-ppc: improve correctness of the fsel instruction
[qemu/qemu-JZ.git] / hw / adb.c
blob0f21445757bc95455038b2f5808f28ca8be54985
1 /*
2 * QEMU ADB support
4 * Copyright (c) 2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "hw.h"
25 #include "ppc_mac.h"
26 #include "console.h"
28 /* debug ADB */
29 //#define DEBUG_ADB
31 #ifdef DEBUG_ADB
32 #define ADB_DPRINTF(fmt, args...) \
33 do { printf("ADB: " fmt , ##args); } while (0)
34 #else
35 #define ADB_DPRINTF(fmt, args...)
36 #endif
38 /* ADB commands */
39 #define ADB_BUSRESET 0x00
40 #define ADB_FLUSH 0x01
41 #define ADB_WRITEREG 0x08
42 #define ADB_READREG 0x0c
44 /* ADB device commands */
45 #define ADB_CMD_SELF_TEST 0xff
46 #define ADB_CMD_CHANGE_ID 0xfe
47 #define ADB_CMD_CHANGE_ID_AND_ACT 0xfd
48 #define ADB_CMD_CHANGE_ID_AND_ENABLE 0x00
50 /* ADB default device IDs (upper 4 bits of ADB command byte) */
51 #define ADB_DONGLE 1
52 #define ADB_KEYBOARD 2
53 #define ADB_MOUSE 3
54 #define ADB_TABLET 4
55 #define ADB_MODEM 5
56 #define ADB_MISC 7
58 /* error codes */
59 #define ADB_RET_NOTPRESENT (-2)
61 int adb_request(ADBBusState *s, uint8_t *obuf, const uint8_t *buf, int len)
63 ADBDevice *d;
64 int devaddr, cmd, i;
66 cmd = buf[0] & 0xf;
67 if (cmd == ADB_BUSRESET) {
68 for(i = 0; i < s->nb_devices; i++) {
69 d = &s->devices[i];
70 if (d->devreset) {
71 d->devreset(d);
74 return 0;
76 devaddr = buf[0] >> 4;
77 for(i = 0; i < s->nb_devices; i++) {
78 d = &s->devices[i];
79 if (d->devaddr == devaddr) {
80 return d->devreq(d, obuf, buf, len);
83 return ADB_RET_NOTPRESENT;
86 /* XXX: move that to cuda ? */
87 int adb_poll(ADBBusState *s, uint8_t *obuf)
89 ADBDevice *d;
90 int olen, i;
91 uint8_t buf[1];
93 olen = 0;
94 for(i = 0; i < s->nb_devices; i++) {
95 if (s->poll_index >= s->nb_devices)
96 s->poll_index = 0;
97 d = &s->devices[s->poll_index];
98 buf[0] = ADB_READREG | (d->devaddr << 4);
99 olen = adb_request(s, obuf + 1, buf, 1);
100 /* if there is data, we poll again the same device */
101 if (olen > 0) {
102 obuf[0] = buf[0];
103 olen++;
104 break;
106 s->poll_index++;
108 return olen;
111 ADBDevice *adb_register_device(ADBBusState *s, int devaddr,
112 ADBDeviceRequest *devreq,
113 ADBDeviceReset *devreset,
114 void *opaque)
116 ADBDevice *d;
117 if (s->nb_devices >= MAX_ADB_DEVICES)
118 return NULL;
119 d = &s->devices[s->nb_devices++];
120 d->bus = s;
121 d->devaddr = devaddr;
122 d->devreq = devreq;
123 d->devreset = devreset;
124 d->opaque = opaque;
125 qemu_register_reset((QEMUResetHandler *)devreset, d);
126 d->devreset(d);
127 return d;
130 /***************************************************************/
131 /* Keyboard ADB device */
133 typedef struct KBDState {
134 uint8_t data[128];
135 int rptr, wptr, count;
136 } KBDState;
138 static const uint8_t pc_to_adb_keycode[256] = {
139 0, 53, 18, 19, 20, 21, 23, 22, 26, 28, 25, 29, 27, 24, 51, 48,
140 12, 13, 14, 15, 17, 16, 32, 34, 31, 35, 33, 30, 36, 54, 0, 1,
141 2, 3, 5, 4, 38, 40, 37, 41, 39, 50, 56, 42, 6, 7, 8, 9,
142 11, 45, 46, 43, 47, 44,123, 67, 58, 49, 57,122,120, 99,118, 96,
143 97, 98,100,101,109, 71,107, 89, 91, 92, 78, 86, 87, 88, 69, 83,
144 84, 85, 82, 65, 0, 0, 10,103,111, 0, 0,110, 81, 0, 0, 0,
145 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
146 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
147 0, 0, 0, 94, 0, 93, 0, 0, 0, 0, 0, 0,104,102, 0, 0,
148 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 76,125, 0, 0,
149 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,105, 0, 0, 0, 0, 0,
150 0, 0, 0, 0, 0, 75, 0, 0,124, 0, 0, 0, 0, 0, 0, 0,
151 0, 0, 0, 0, 0, 0, 0,115, 62,116, 0, 59, 0, 60, 0,119,
152 61,121,114,117, 0, 0, 0, 0, 0, 0, 0, 55,126, 0,127, 0,
153 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
154 0, 0, 0, 0, 0, 95, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
157 static void adb_kbd_put_keycode(void *opaque, int keycode)
159 ADBDevice *d = opaque;
160 KBDState *s = d->opaque;
162 if (s->count < sizeof(s->data)) {
163 s->data[s->wptr] = keycode;
164 if (++s->wptr == sizeof(s->data))
165 s->wptr = 0;
166 s->count++;
170 static int adb_kbd_poll(ADBDevice *d, uint8_t *obuf)
172 static int ext_keycode;
173 KBDState *s = d->opaque;
174 int adb_keycode, keycode;
175 int olen;
177 olen = 0;
178 for(;;) {
179 if (s->count == 0)
180 break;
181 keycode = s->data[s->rptr];
182 if (++s->rptr == sizeof(s->data))
183 s->rptr = 0;
184 s->count--;
186 if (keycode == 0xe0) {
187 ext_keycode = 1;
188 } else {
189 if (ext_keycode)
190 adb_keycode = pc_to_adb_keycode[keycode | 0x80];
191 else
192 adb_keycode = pc_to_adb_keycode[keycode & 0x7f];
193 obuf[0] = adb_keycode | (keycode & 0x80);
194 /* NOTE: could put a second keycode if needed */
195 obuf[1] = 0xff;
196 olen = 2;
197 ext_keycode = 0;
198 break;
201 return olen;
204 static int adb_kbd_request(ADBDevice *d, uint8_t *obuf,
205 const uint8_t *buf, int len)
207 KBDState *s = d->opaque;
208 int cmd, reg, olen;
210 if ((buf[0] & 0x0f) == ADB_FLUSH) {
211 /* flush keyboard fifo */
212 s->wptr = s->rptr = s->count = 0;
213 return 0;
216 cmd = buf[0] & 0xc;
217 reg = buf[0] & 0x3;
218 olen = 0;
219 switch(cmd) {
220 case ADB_WRITEREG:
221 switch(reg) {
222 case 2:
223 /* LED status */
224 break;
225 case 3:
226 switch(buf[2]) {
227 case ADB_CMD_SELF_TEST:
228 break;
229 case ADB_CMD_CHANGE_ID:
230 case ADB_CMD_CHANGE_ID_AND_ACT:
231 case ADB_CMD_CHANGE_ID_AND_ENABLE:
232 d->devaddr = buf[1] & 0xf;
233 break;
234 default:
235 /* XXX: check this */
236 d->devaddr = buf[1] & 0xf;
237 d->handler = buf[2];
238 break;
241 break;
242 case ADB_READREG:
243 switch(reg) {
244 case 0:
245 olen = adb_kbd_poll(d, obuf);
246 break;
247 case 1:
248 break;
249 case 2:
250 obuf[0] = 0x00; /* XXX: check this */
251 obuf[1] = 0x07; /* led status */
252 olen = 2;
253 break;
254 case 3:
255 obuf[0] = d->handler;
256 obuf[1] = d->devaddr;
257 olen = 2;
258 break;
260 break;
262 return olen;
265 static int adb_kbd_reset(ADBDevice *d)
267 KBDState *s = d->opaque;
269 d->handler = 1;
270 d->devaddr = ADB_KEYBOARD;
271 memset(s, 0, sizeof(KBDState));
273 return 0;
276 void adb_kbd_init(ADBBusState *bus)
278 ADBDevice *d;
279 KBDState *s;
280 s = qemu_mallocz(sizeof(KBDState));
281 d = adb_register_device(bus, ADB_KEYBOARD, adb_kbd_request,
282 adb_kbd_reset, s);
283 qemu_add_kbd_event_handler(adb_kbd_put_keycode, d);
286 /***************************************************************/
287 /* Mouse ADB device */
289 typedef struct MouseState {
290 int buttons_state, last_buttons_state;
291 int dx, dy, dz;
292 } MouseState;
294 static void adb_mouse_event(void *opaque,
295 int dx1, int dy1, int dz1, int buttons_state)
297 ADBDevice *d = opaque;
298 MouseState *s = d->opaque;
300 s->dx += dx1;
301 s->dy += dy1;
302 s->dz += dz1;
303 s->buttons_state = buttons_state;
307 static int adb_mouse_poll(ADBDevice *d, uint8_t *obuf)
309 MouseState *s = d->opaque;
310 int dx, dy;
312 if (s->last_buttons_state == s->buttons_state &&
313 s->dx == 0 && s->dy == 0)
314 return 0;
316 dx = s->dx;
317 if (dx < -63)
318 dx = -63;
319 else if (dx > 63)
320 dx = 63;
322 dy = s->dy;
323 if (dy < -63)
324 dy = -63;
325 else if (dy > 63)
326 dy = 63;
328 s->dx -= dx;
329 s->dy -= dy;
330 s->last_buttons_state = s->buttons_state;
332 dx &= 0x7f;
333 dy &= 0x7f;
335 if (!(s->buttons_state & MOUSE_EVENT_LBUTTON))
336 dy |= 0x80;
337 if (!(s->buttons_state & MOUSE_EVENT_RBUTTON))
338 dx |= 0x80;
340 obuf[0] = dy;
341 obuf[1] = dx;
342 return 2;
345 static int adb_mouse_request(ADBDevice *d, uint8_t *obuf,
346 const uint8_t *buf, int len)
348 MouseState *s = d->opaque;
349 int cmd, reg, olen;
351 if ((buf[0] & 0x0f) == ADB_FLUSH) {
352 /* flush mouse fifo */
353 s->buttons_state = s->last_buttons_state;
354 s->dx = 0;
355 s->dy = 0;
356 s->dz = 0;
357 return 0;
360 cmd = buf[0] & 0xc;
361 reg = buf[0] & 0x3;
362 olen = 0;
363 switch(cmd) {
364 case ADB_WRITEREG:
365 ADB_DPRINTF("write reg %d val 0x%2.2x\n", reg, buf[1]);
366 switch(reg) {
367 case 2:
368 break;
369 case 3:
370 switch(buf[2]) {
371 case ADB_CMD_SELF_TEST:
372 break;
373 case ADB_CMD_CHANGE_ID:
374 case ADB_CMD_CHANGE_ID_AND_ACT:
375 case ADB_CMD_CHANGE_ID_AND_ENABLE:
376 d->devaddr = buf[1] & 0xf;
377 break;
378 default:
379 /* XXX: check this */
380 d->devaddr = buf[1] & 0xf;
381 break;
384 break;
385 case ADB_READREG:
386 switch(reg) {
387 case 0:
388 olen = adb_mouse_poll(d, obuf);
389 break;
390 case 1:
391 break;
392 case 3:
393 obuf[0] = d->handler;
394 obuf[1] = d->devaddr;
395 olen = 2;
396 break;
398 ADB_DPRINTF("read reg %d obuf[0] 0x%2.2x obuf[1] 0x%2.2x\n", reg,
399 obuf[0], obuf[1]);
400 break;
402 return olen;
405 static int adb_mouse_reset(ADBDevice *d)
407 MouseState *s = d->opaque;
409 d->handler = 2;
410 d->devaddr = ADB_MOUSE;
411 memset(s, 0, sizeof(MouseState));
413 return 0;
416 void adb_mouse_init(ADBBusState *bus)
418 ADBDevice *d;
419 MouseState *s;
421 s = qemu_mallocz(sizeof(MouseState));
422 d = adb_register_device(bus, ADB_MOUSE, adb_mouse_request,
423 adb_mouse_reset, s);
424 qemu_add_mouse_event_handler(adb_mouse_event, d, 0, "QEMU ADB Mouse");