hw/usb.h

   1 /*
   2  * QEMU USB API
   3  *
   4  * Copyright (c) 2005 Fabrice Bellard
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24 #define USB_TOKEN_SETUP 0x2d
  25 #define USB_TOKEN_IN    0x69 /* device -> host */
  26 #define USB_TOKEN_OUT   0xe1 /* host -> device */
  27
  28 /* specific usb messages, also sent in the 'pid' parameter */
  29 #define USB_MSG_ATTACH   0x100
  30 #define USB_MSG_DETACH   0x101
  31 #define USB_MSG_RESET    0x102
  32
  33 #define USB_RET_NODEV  (-1)
  34 #define USB_RET_NAK    (-2)
  35 #define USB_RET_STALL  (-3)
  36 #define USB_RET_BABBLE (-4)
  37 #define USB_RET_ASYNC  (-5)
  38
  39 #define USB_SPEED_LOW   0
  40 #define USB_SPEED_FULL  1
  41 #define USB_SPEED_HIGH  2
  42
  43 #define USB_STATE_NOTATTACHED 0
  44 #define USB_STATE_ATTACHED    1
  45 //#define USB_STATE_POWERED     2
  46 #define USB_STATE_DEFAULT     3
  47 //#define USB_STATE_ADDRESS     4
  48 //#define       USB_STATE_CONFIGURED  5
  49 #define USB_STATE_SUSPENDED   6
  50
  51 #define USB_CLASS_AUDIO                 1
  52 #define USB_CLASS_COMM                  2
  53 #define USB_CLASS_HID                   3
  54 #define USB_CLASS_PHYSICAL              5
  55 #define USB_CLASS_STILL_IMAGE           6
  56 #define USB_CLASS_PRINTER               7
  57 #define USB_CLASS_MASS_STORAGE          8
  58 #define USB_CLASS_HUB                   9
  59 #define USB_CLASS_CDC_DATA              0x0a
  60 #define USB_CLASS_CSCID                 0x0b
  61 #define USB_CLASS_CONTENT_SEC           0x0d
  62 #define USB_CLASS_APP_SPEC              0xfe
  63 #define USB_CLASS_VENDOR_SPEC           0xff
  64
  65 #define USB_DIR_OUT                     0
  66 #define USB_DIR_IN                      0x80
  67
  68 #define USB_TYPE_MASK                   (0x03 << 5)
  69 #define USB_TYPE_STANDARD               (0x00 << 5)
  70 #define USB_TYPE_CLASS                  (0x01 << 5)
  71 #define USB_TYPE_VENDOR                 (0x02 << 5)
  72 #define USB_TYPE_RESERVED               (0x03 << 5)
  73
  74 #define USB_RECIP_MASK                  0x1f
  75 #define USB_RECIP_DEVICE                0x00
  76 #define USB_RECIP_INTERFACE             0x01
  77 #define USB_RECIP_ENDPOINT              0x02
  78 #define USB_RECIP_OTHER                 0x03
  79
  80 #define DeviceRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
  81 #define DeviceOutRequest ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
  82 #define InterfaceRequest \
  83         ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
  84 #define InterfaceOutRequest \
  85         ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
  86 #define EndpointRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
  87 #define EndpointOutRequest \
  88         ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
  89
  90 #define USB_REQ_GET_STATUS              0x00
  91 #define USB_REQ_CLEAR_FEATURE           0x01
  92 #define USB_REQ_SET_FEATURE             0x03
  93 #define USB_REQ_SET_ADDRESS             0x05
  94 #define USB_REQ_GET_DESCRIPTOR          0x06
  95 #define USB_REQ_SET_DESCRIPTOR          0x07
  96 #define USB_REQ_GET_CONFIGURATION       0x08
  97 #define USB_REQ_SET_CONFIGURATION       0x09
  98 #define USB_REQ_GET_INTERFACE           0x0A
  99 #define USB_REQ_SET_INTERFACE           0x0B
 100 #define USB_REQ_SYNCH_FRAME             0x0C
 101
 102 #define USB_DEVICE_SELF_POWERED         0
 103 #define USB_DEVICE_REMOTE_WAKEUP        1
 104
 105 #define USB_DT_DEVICE                   0x01
 106 #define USB_DT_CONFIG                   0x02
 107 #define USB_DT_STRING                   0x03
 108 #define USB_DT_INTERFACE                0x04
 109 #define USB_DT_ENDPOINT                 0x05
 110
 111 #define USB_ENDPOINT_XFER_CONTROL       0
 112 #define USB_ENDPOINT_XFER_ISOC          1
 113 #define USB_ENDPOINT_XFER_BULK          2
 114 #define USB_ENDPOINT_XFER_INT           3
 115
 116 typedef struct USBPort USBPort;
 117 typedef struct USBDevice USBDevice;
 118 typedef struct USBPacket USBPacket;
 119
 120 /* definition of a USB device */
 121 struct USBDevice {
 122     void *opaque;
 123
 124     /*
 125      * Process USB packet.
 126      * Called by the HC (Host Controller).
 127      *
 128      * Returns length of the transaction
 129      * or one of the USB_RET_XXX codes.
 130      */
 131     int (*handle_packet)(USBDevice *dev, USBPacket *p);
 132
 133     /*
 134      * Called when device is destroyed.
 135      */
 136     void (*handle_destroy)(USBDevice *dev);
 137
 138     int speed;
 139
 140     /* The following fields are used by the generic USB device
 141        layer. They are here just to avoid creating a new structure
 142        for them. */
 143
 144     /*
 145      * Reset the device
 146      */
 147     void (*handle_reset)(USBDevice *dev);
 148
 149     /*
 150      * Process control request.
 151      * Called from handle_packet().
 152      *
 153      * Returns length or one of the USB_RET_ codes.
 154      */
 155     int (*handle_control)(USBDevice *dev, int request, int value,
 156                           int index, int length, uint8_t *data);
 157
 158     /*
 159      * Process data transfers (both BULK and ISOC).
 160      * Called from handle_packet().
 161      *
 162      * Returns length or one of the USB_RET_ codes.
 163      */
 164     int (*handle_data)(USBDevice *dev, USBPacket *p);
 165
 166     uint8_t addr;
 167     char devname[32];
 168
 169     int state;
 170     uint8_t setup_buf[8];
 171     uint8_t data_buf[1024];
 172     int remote_wakeup;
 173     int setup_state;
 174     int setup_len;
 175     int setup_index;
 176 };
 177
 178 typedef void (*usb_attachfn)(USBPort *port, USBDevice *dev);
 179
 180 /* USB port on which a device can be connected */
 181 struct USBPort {
 182     USBDevice *dev;
 183     usb_attachfn attach;
 184     void *opaque;
 185     int index; /* internal port index, may be used with the opaque */
 186     struct USBPort *next; /* Used internally by qemu.  */
 187 };
 188
 189 typedef void USBCallback(USBPacket * packet, void *opaque);
 190
 191 /* Structure used to hold information about an active USB packet.  */
 192 struct USBPacket {
 193     /* Data fields for use by the driver.  */
 194     int pid;
 195     uint8_t devaddr;
 196     uint8_t devep;
 197     uint8_t *data;
 198     int len;
 199     /* Internal use by the USB layer.  */
 200     USBCallback *complete_cb;
 201     void *complete_opaque;
 202     USBCallback *cancel_cb;
 203     void *cancel_opaque;
 204 };
 205
 206 /* Defer completion of a USB packet.  The hadle_packet routine should then
 207    return USB_RET_ASYNC.  Packets that complete immediately (before
 208    handle_packet returns) should not call this method.  */
 209 static inline void usb_defer_packet(USBPacket *p, USBCallback *cancel,
 210                                     void * opaque)
 211 {
 212     p->cancel_cb = cancel;
 213     p->cancel_opaque = opaque;
 214 }
 215
 216 /* Notify the controller that an async packet is complete.  This should only
 217    be called for packets previously deferred with usb_defer_packet, and
 218    should never be called from within handle_packet.  */
 219 static inline void usb_packet_complete(USBPacket *p)
 220 {
 221     p->complete_cb(p, p->complete_opaque);
 222 }
 223
 224 /* Cancel an active packet.  The packed must have been deferred with
 225    usb_defer_packet,  and not yet completed.  */
 226 static inline void usb_cancel_packet(USBPacket * p)
 227 {
 228     p->cancel_cb(p, p->cancel_opaque);
 229 }
 230
 231 int usb_device_add_dev(USBDevice *dev);
 232 int usb_device_del_addr(int bus_num, int addr);
 233 void usb_attach(USBPort *port, USBDevice *dev);
 234 int usb_generic_handle_packet(USBDevice *s, USBPacket *p);
 235 int set_usb_string(uint8_t *buf, const char *str);
 236 void usb_send_msg(USBDevice *dev, int msg);
 237
 238 /* usb hub */
 239 USBDevice *usb_hub_init(int nb_ports);
 240
 241 /* usb-linux.c */
 242 USBDevice *usb_host_device_open(const char *devname);
 243 void usb_host_info(void);
 244
 245 /* usb-hid.c */
 246 USBDevice *usb_mouse_init(void);
 247 USBDevice *usb_tablet_init(void);
 248 USBDevice *usb_keyboard_init(void);
 249
 250 /* usb-msd.c */
 251 USBDevice *usb_msd_init(const char *filename);
 252
 253 /* usb-net.c */
 254 USBDevice *usb_net_init(NICInfo *nd);
 255
 256 /* usb-wacom.c */
 257 USBDevice *usb_wacom_init(void);
 258
 259 /* usb-serial.c */
 260 USBDevice *usb_serial_init(const char *filename);
 261
 262 /* usb ports of the VM */
 263
 264 void qemu_register_usb_port(USBPort *port, void *opaque, int index,
 265                             usb_attachfn attach);
 266
 267 #define VM_USB_HUB_SIZE 8
 268
 269 /* usb-musb.c */
 270 enum musb_irq_source_e {
 271     musb_irq_suspend = 0,
 272     musb_irq_resume,
 273     musb_irq_rst_babble,
 274     musb_irq_sof,
 275     musb_irq_connect,
 276     musb_irq_disconnect,
 277     musb_irq_vbus_request,
 278     musb_irq_vbus_error,
 279     musb_irq_rx,
 280     musb_irq_tx,
 281     musb_set_vbus,
 282     musb_set_session,
 283     __musb_irq_max,
 284 };
 285
 286 struct musb_s;
 287 struct musb_s *musb_init(qemu_irq *irqs);
 288 uint32_t musb_core_intr_get(struct musb_s *s);
 289 void musb_core_intr_clear(struct musb_s *s, uint32_t mask);
 290 void musb_set_size(struct musb_s *s, int epnum, int size, int is_tx);