bsd/darwin-user: mmap_frag() users only check for -1 error
[qemu/pdb.git] / hw / ppc_newworld.c
bloba4c714ae7f304028b0635402f857bf4d01a990b7
1 /*
2 * QEMU PowerPC CHRP (currently NewWorld PowerMac) hardware System Emulator
4 * Copyright (c) 2004-2007 Fabrice Bellard
5 * Copyright (c) 2007 Jocelyn Mayer
7 * Permission is hereby granted, free of charge, to any person obtaining a copy
8 * of this software and associated documentation files (the "Software"), to deal
9 * in the Software without restriction, including without limitation the rights
10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11 * copies of the Software, and to permit persons to whom the Software is
12 * furnished to do so, subject to the following conditions:
14 * The above copyright notice and this permission notice shall be included in
15 * all copies or substantial portions of the Software.
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23 * THE SOFTWARE.
25 #include "hw.h"
26 #include "ppc.h"
27 #include "ppc_mac.h"
28 #include "mac_dbdma.h"
29 #include "nvram.h"
30 #include "pc.h"
31 #include "pci.h"
32 #include "usb-ohci.h"
33 #include "net.h"
34 #include "sysemu.h"
35 #include "boards.h"
36 #include "fw_cfg.h"
37 #include "escc.h"
38 #include "openpic.h"
39 #include "ide.h"
40 #include "loader.h"
41 #include "elf.h"
42 #include "kvm.h"
44 #define MAX_IDE_BUS 2
45 #define VGA_BIOS_SIZE 65536
46 #define CFG_ADDR 0xf0000510
48 /* debug UniNorth */
49 //#define DEBUG_UNIN
51 #ifdef DEBUG_UNIN
52 #define UNIN_DPRINTF(fmt, ...) \
53 do { printf("UNIN: " fmt , ## __VA_ARGS__); } while (0)
54 #else
55 #define UNIN_DPRINTF(fmt, ...)
56 #endif
58 /* UniN device */
59 static void unin_writel (void *opaque, target_phys_addr_t addr, uint32_t value)
61 UNIN_DPRINTF("writel addr " TARGET_FMT_plx " val %x\n", addr, value);
64 static uint32_t unin_readl (void *opaque, target_phys_addr_t addr)
66 uint32_t value;
68 value = 0;
69 UNIN_DPRINTF("readl addr " TARGET_FMT_plx " val %x\n", addr, value);
71 return value;
74 static CPUWriteMemoryFunc * const unin_write[] = {
75 &unin_writel,
76 &unin_writel,
77 &unin_writel,
80 static CPUReadMemoryFunc * const unin_read[] = {
81 &unin_readl,
82 &unin_readl,
83 &unin_readl,
86 static int fw_cfg_boot_set(void *opaque, const char *boot_device)
88 fw_cfg_add_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
89 return 0;
92 /* PowerPC Mac99 hardware initialisation */
93 static void ppc_core99_init (ram_addr_t ram_size,
94 const char *boot_device,
95 const char *kernel_filename,
96 const char *kernel_cmdline,
97 const char *initrd_filename,
98 const char *cpu_model)
100 CPUState *env = NULL, *envs[MAX_CPUS];
101 char *filename;
102 qemu_irq *pic, **openpic_irqs;
103 int unin_memory;
104 int linux_boot, i;
105 ram_addr_t ram_offset, bios_offset, vga_bios_offset;
106 uint32_t kernel_base, kernel_size, initrd_base, initrd_size;
107 PCIBus *pci_bus;
108 MacIONVRAMState *nvr;
109 int nvram_mem_index;
110 int vga_bios_size, bios_size;
111 int pic_mem_index, dbdma_mem_index, cuda_mem_index, escc_mem_index;
112 int ppc_boot_device;
113 DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
114 void *fw_cfg;
115 void *dbdma;
116 uint8_t *vga_bios_ptr;
118 linux_boot = (kernel_filename != NULL);
120 /* init CPUs */
121 if (cpu_model == NULL)
122 #ifdef TARGET_PPC64
123 cpu_model = "970fx";
124 #else
125 cpu_model = "G4";
126 #endif
127 for (i = 0; i < smp_cpus; i++) {
128 env = cpu_init(cpu_model);
129 if (!env) {
130 fprintf(stderr, "Unable to find PowerPC CPU definition\n");
131 exit(1);
133 /* Set time-base frequency to 100 Mhz */
134 cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL);
135 #if 0
136 env->osi_call = vga_osi_call;
137 #endif
138 qemu_register_reset((QEMUResetHandler*)&cpu_reset, env);
139 envs[i] = env;
142 /* Make sure all register sets take effect */
143 cpu_synchronize_state(env);
145 /* allocate RAM */
146 ram_offset = qemu_ram_alloc(ram_size);
147 cpu_register_physical_memory(0, ram_size, ram_offset);
149 /* allocate and load BIOS */
150 bios_offset = qemu_ram_alloc(BIOS_SIZE);
151 if (bios_name == NULL)
152 bios_name = PROM_FILENAME;
153 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
154 cpu_register_physical_memory(PROM_ADDR, BIOS_SIZE, bios_offset | IO_MEM_ROM);
156 /* Load OpenBIOS (ELF) */
157 if (filename) {
158 bios_size = load_elf(filename, 0, NULL, NULL, NULL, 1, ELF_MACHINE, 0);
160 qemu_free(filename);
161 } else {
162 bios_size = -1;
164 if (bios_size < 0 || bios_size > BIOS_SIZE) {
165 hw_error("qemu: could not load PowerPC bios '%s'\n", bios_name);
166 exit(1);
169 /* allocate and load VGA BIOS */
170 vga_bios_offset = qemu_ram_alloc(VGA_BIOS_SIZE);
171 vga_bios_ptr = qemu_get_ram_ptr(vga_bios_offset);
172 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, VGABIOS_FILENAME);
173 if (filename) {
174 vga_bios_size = load_image(filename, vga_bios_ptr + 8);
175 qemu_free(filename);
176 } else {
177 vga_bios_size = -1;
179 if (vga_bios_size < 0) {
180 /* if no bios is present, we can still work */
181 fprintf(stderr, "qemu: warning: could not load VGA bios '%s'\n",
182 VGABIOS_FILENAME);
183 vga_bios_size = 0;
184 } else {
185 /* set a specific header (XXX: find real Apple format for NDRV
186 drivers) */
187 vga_bios_ptr[0] = 'N';
188 vga_bios_ptr[1] = 'D';
189 vga_bios_ptr[2] = 'R';
190 vga_bios_ptr[3] = 'V';
191 cpu_to_be32w((uint32_t *)(vga_bios_ptr + 4), vga_bios_size);
192 vga_bios_size += 8;
194 /* Round to page boundary */
195 vga_bios_size = (vga_bios_size + TARGET_PAGE_SIZE - 1) &
196 TARGET_PAGE_MASK;
199 if (linux_boot) {
200 uint64_t lowaddr = 0;
201 int bswap_needed;
203 #ifdef BSWAP_NEEDED
204 bswap_needed = 1;
205 #else
206 bswap_needed = 0;
207 #endif
208 kernel_base = KERNEL_LOAD_ADDR;
210 /* Now we can load the kernel. The first step tries to load the kernel
211 supposing PhysAddr = 0x00000000. If that was wrong the kernel is
212 loaded again, the new PhysAddr being computed from lowaddr. */
213 kernel_size = load_elf(kernel_filename, kernel_base, NULL, &lowaddr, NULL,
214 1, ELF_MACHINE, 0);
215 if (kernel_size > 0 && lowaddr != KERNEL_LOAD_ADDR) {
216 kernel_size = load_elf(kernel_filename, (2 * kernel_base) - lowaddr,
217 NULL, NULL, NULL, 1, ELF_MACHINE, 0);
219 if (kernel_size < 0)
220 kernel_size = load_aout(kernel_filename, kernel_base,
221 ram_size - kernel_base, bswap_needed,
222 TARGET_PAGE_SIZE);
223 if (kernel_size < 0)
224 kernel_size = load_image_targphys(kernel_filename,
225 kernel_base,
226 ram_size - kernel_base);
227 if (kernel_size < 0) {
228 hw_error("qemu: could not load kernel '%s'\n", kernel_filename);
229 exit(1);
231 /* load initrd */
232 if (initrd_filename) {
233 initrd_base = INITRD_LOAD_ADDR;
234 initrd_size = load_image_targphys(initrd_filename, initrd_base,
235 ram_size - initrd_base);
236 if (initrd_size < 0) {
237 hw_error("qemu: could not load initial ram disk '%s'\n",
238 initrd_filename);
239 exit(1);
241 } else {
242 initrd_base = 0;
243 initrd_size = 0;
245 ppc_boot_device = 'm';
246 } else {
247 kernel_base = 0;
248 kernel_size = 0;
249 initrd_base = 0;
250 initrd_size = 0;
251 ppc_boot_device = '\0';
252 /* We consider that NewWorld PowerMac never have any floppy drive
253 * For now, OHW cannot boot from the network.
255 for (i = 0; boot_device[i] != '\0'; i++) {
256 if (boot_device[i] >= 'c' && boot_device[i] <= 'f') {
257 ppc_boot_device = boot_device[i];
258 break;
261 if (ppc_boot_device == '\0') {
262 fprintf(stderr, "No valid boot device for Mac99 machine\n");
263 exit(1);
267 isa_mem_base = 0x80000000;
269 /* Register 8 MB of ISA IO space */
270 isa_mmio_init(0xf2000000, 0x00800000);
272 /* UniN init */
273 unin_memory = cpu_register_io_memory(unin_read, unin_write, NULL);
274 cpu_register_physical_memory(0xf8000000, 0x00001000, unin_memory);
276 openpic_irqs = qemu_mallocz(smp_cpus * sizeof(qemu_irq *));
277 openpic_irqs[0] =
278 qemu_mallocz(smp_cpus * sizeof(qemu_irq) * OPENPIC_OUTPUT_NB);
279 for (i = 0; i < smp_cpus; i++) {
280 /* Mac99 IRQ connection between OpenPIC outputs pins
281 * and PowerPC input pins
283 switch (PPC_INPUT(env)) {
284 case PPC_FLAGS_INPUT_6xx:
285 openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
286 openpic_irqs[i][OPENPIC_OUTPUT_INT] =
287 ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
288 openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
289 ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
290 openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
291 ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_MCP];
292 /* Not connected ? */
293 openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
294 /* Check this */
295 openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
296 ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_HRESET];
297 break;
298 #if defined(TARGET_PPC64)
299 case PPC_FLAGS_INPUT_970:
300 openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
301 openpic_irqs[i][OPENPIC_OUTPUT_INT] =
302 ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
303 openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
304 ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
305 openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
306 ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_MCP];
307 /* Not connected ? */
308 openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
309 /* Check this */
310 openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
311 ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_HRESET];
312 break;
313 #endif /* defined(TARGET_PPC64) */
314 default:
315 hw_error("Bus model not supported on mac99 machine\n");
316 exit(1);
319 pic = openpic_init(NULL, &pic_mem_index, smp_cpus, openpic_irqs, NULL);
320 pci_bus = pci_pmac_init(pic);
321 /* init basic PC hardware */
322 pci_vga_init(pci_bus, vga_bios_offset, vga_bios_size);
324 escc_mem_index = escc_init(0x80013000, pic[0x25], pic[0x24],
325 serial_hds[0], serial_hds[1], ESCC_CLOCK, 4);
327 for(i = 0; i < nb_nics; i++)
328 pci_nic_init_nofail(&nd_table[i], "ne2k_pci", NULL);
330 if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
331 fprintf(stderr, "qemu: too many IDE bus\n");
332 exit(1);
334 for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
335 hd[i] = drive_get(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
337 dbdma = DBDMA_init(&dbdma_mem_index);
338 pci_cmd646_ide_init(pci_bus, hd, 0);
340 /* cuda also initialize ADB */
341 cuda_init(&cuda_mem_index, pic[0x19]);
343 adb_kbd_init(&adb_bus);
344 adb_mouse_init(&adb_bus);
347 macio_init(pci_bus, PCI_DEVICE_ID_APPLE_UNI_N_KEYL, 0, pic_mem_index,
348 dbdma_mem_index, cuda_mem_index, NULL, 0, NULL,
349 escc_mem_index);
351 if (usb_enabled) {
352 usb_ohci_init_pci(pci_bus, -1);
355 if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
356 graphic_depth = 15;
358 /* The NewWorld NVRAM is not located in the MacIO device */
359 nvr = macio_nvram_init(&nvram_mem_index, 0x2000, 1);
360 pmac_format_nvram_partition(nvr, 0x2000);
361 macio_nvram_map(nvr, 0xFFF04000);
362 /* No PCI init: the BIOS will do it */
364 fw_cfg = fw_cfg_init(0, 0, CFG_ADDR, CFG_ADDR + 2);
365 fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
366 fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
367 fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, ARCH_MAC99);
368 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base);
369 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
370 if (kernel_cmdline) {
371 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, CMDLINE_ADDR);
372 pstrcpy_targphys("cmdline", CMDLINE_ADDR, TARGET_PAGE_SIZE, kernel_cmdline);
373 } else {
374 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
376 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base);
377 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
378 fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ppc_boot_device);
380 fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_WIDTH, graphic_width);
381 fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_HEIGHT, graphic_height);
382 fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_DEPTH, graphic_depth);
384 qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
387 static QEMUMachine core99_machine = {
388 .name = "mac99",
389 .desc = "Mac99 based PowerMAC",
390 .init = ppc_core99_init,
391 .max_cpus = MAX_CPUS,
392 #ifdef TARGET_PPC64
393 .is_default = 1,
394 #endif
397 static void core99_machine_init(void)
399 qemu_register_machine(&core99_machine);
402 machine_init(core99_machine_init);