hw/palm.c

   1 /*
   2  * PalmOne's (TM) PDAs.
   3  *
   4  * Copyright (C) 2006-2007 Andrzej Zaborowski  <balrog@zabor.org>
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License as
   8  * published by the Free Software Foundation; either version 2 or
   9  * (at your option) version 3 of the License.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License along
  17  * with this program; if not, write to the Free Software Foundation, Inc.,
  18  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  19  */
  20 #include "hw.h"
  21 #include "audio/audio.h"
  22 #include "sysemu.h"
  23 #include "console.h"
  24 #include "omap.h"
  25 #include "boards.h"
  26 #include "arm-misc.h"
  27 #include "devices.h"
  28
  29 static uint32_t static_readb(void *opaque, target_phys_addr_t offset)
  30 {
  31     uint32_t *val = (uint32_t *) opaque;
  32     return *val >> ((offset & 3) << 3);
  33 }
  34
  35 static uint32_t static_readh(void *opaque, target_phys_addr_t offset)
  36 {
  37     uint32_t *val = (uint32_t *) opaque;
  38     return *val >> ((offset & 1) << 3);
  39 }
  40
  41 static uint32_t static_readw(void *opaque, target_phys_addr_t offset)
  42 {
  43     uint32_t *val = (uint32_t *) opaque;
  44     return *val >> ((offset & 0) << 3);
  45 }
  46
  47 static void static_write(void *opaque, target_phys_addr_t offset,
  48                 uint32_t value)
  49 {
  50 #ifdef SPY
  51     printf("%s: value %08lx written at " PA_FMT "\n",
  52                     __FUNCTION__, value, offset);
  53 #endif
  54 }
  55
  56 static CPUReadMemoryFunc *static_readfn[] = {
  57     static_readb,
  58     static_readh,
  59     static_readw,
  60 };
  61
  62 static CPUWriteMemoryFunc *static_writefn[] = {
  63     static_write,
  64     static_write,
  65     static_write,
  66 };
  67
  68 /* Palm Tunsgten|E support */
  69
  70 /* Shared GPIOs */
  71 #define PALMTE_USBDETECT_GPIO   0
  72 #define PALMTE_USB_OR_DC_GPIO   1
  73 #define PALMTE_TSC_GPIO         4
  74 #define PALMTE_PINTDAV_GPIO     6
  75 #define PALMTE_MMC_WP_GPIO      8
  76 #define PALMTE_MMC_POWER_GPIO   9
  77 #define PALMTE_HDQ_GPIO         11
  78 #define PALMTE_HEADPHONES_GPIO  14
  79 #define PALMTE_SPEAKER_GPIO     15
  80 /* MPU private GPIOs */
  81 #define PALMTE_DC_GPIO          2
  82 #define PALMTE_MMC_SWITCH_GPIO  4
  83 #define PALMTE_MMC1_GPIO        6
  84 #define PALMTE_MMC2_GPIO        7
  85 #define PALMTE_MMC3_GPIO        11
  86
  87 static struct mouse_transform_info_s palmte_pointercal = {
  88     .x = 320,
  89     .y = 320,
  90     .a = { -5909, 8, 22465308, 104, 7644, -1219972, 65536 },
  91 };
  92
  93 static void palmte_microwire_setup(struct omap_mpu_state_s *cpu)
  94 {
  95     struct uwire_slave_s *tsc;
  96     AudioState *audio = 0;
  97
  98 #ifdef HAS_AUDIO
  99     audio = AUD_init();
 100 #endif
 101
 102     tsc = tsc2102_init(omap_gpio_in_get(cpu->gpio)[PALMTE_PINTDAV_GPIO],
 103                     audio);
 104
 105     omap_uwire_attach(cpu->microwire, tsc, 0);
 106     omap_mcbsp_i2s_attach(cpu->mcbsp1, tsc210x_codec(tsc));
 107
 108     tsc210x_set_transform(tsc, &palmte_pointercal);
 109 }
 110
 111 static struct {
 112     int row;
 113     int column;
 114 } palmte_keymap[0x80] = {
 115     [0 ... 0x7f] = { -1, -1 },
 116     [0x3b] = { 0, 0 },  /* F1   -> Calendar */
 117     [0x3c] = { 1, 0 },  /* F2   -> Contacts */
 118     [0x3d] = { 2, 0 },  /* F3   -> Tasks List */
 119     [0x3e] = { 3, 0 },  /* F4   -> Note Pad */
 120     [0x01] = { 4, 0 },  /* Esc  -> Power */
 121     [0x4b] = { 0, 1 },  /*         Left */
 122     [0x50] = { 1, 1 },  /*         Down */
 123     [0x48] = { 2, 1 },  /*         Up */
 124     [0x4d] = { 3, 1 },  /*         Right */
 125     [0x4c] = { 4, 1 },  /*         Centre */
 126     [0x39] = { 4, 1 },  /* Spc  -> Centre */
 127 };
 128
 129 static void palmte_button_event(void *opaque, int keycode)
 130 {
 131     struct omap_mpu_state_s *cpu = (struct omap_mpu_state_s *) opaque;
 132
 133     if (palmte_keymap[keycode & 0x7f].row != -1)
 134         omap_mpuio_key(cpu->mpuio,
 135                         palmte_keymap[keycode & 0x7f].row,
 136                         palmte_keymap[keycode & 0x7f].column,
 137                         !(keycode & 0x80));
 138 }
 139
 140 static void palmte_onoff_gpios(void *opaque, int line, int level)
 141 {
 142     switch (line) {
 143     case 0:
 144         printf("%s: current to MMC/SD card %sabled.\n",
 145                         __FUNCTION__, level ? "dis" : "en");
 146         break;
 147     case 1:
 148         printf("%s: internal speaker amplifier %s.\n",
 149                         __FUNCTION__, level ? "down" : "on");
 150         break;
 151
 152     /* These LCD & Audio output signals have not been identified yet.  */
 153     case 2:
 154     case 3:
 155     case 4:
 156         printf("%s: LCD GPIO%i %s.\n",
 157                         __FUNCTION__, line - 1, level ? "high" : "low");
 158         break;
 159     case 5:
 160     case 6:
 161         printf("%s: Audio GPIO%i %s.\n",
 162                         __FUNCTION__, line - 4, level ? "high" : "low");
 163         break;
 164     }
 165 }
 166
 167 static void palmte_gpio_setup(struct omap_mpu_state_s *cpu)
 168 {
 169     qemu_irq *misc_gpio;
 170
 171     omap_mmc_handlers(cpu->mmc,
 172                     omap_gpio_in_get(cpu->gpio)[PALMTE_MMC_WP_GPIO],
 173                     qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio)
 174                             [PALMTE_MMC_SWITCH_GPIO]));
 175
 176     misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7);
 177     omap_gpio_out_set(cpu->gpio, PALMTE_MMC_POWER_GPIO, misc_gpio[0]);
 178     omap_gpio_out_set(cpu->gpio, PALMTE_SPEAKER_GPIO,   misc_gpio[1]);
 179     omap_gpio_out_set(cpu->gpio, 11,                    misc_gpio[2]);
 180     omap_gpio_out_set(cpu->gpio, 12,                    misc_gpio[3]);
 181     omap_gpio_out_set(cpu->gpio, 13,                    misc_gpio[4]);
 182     omap_mpuio_out_set(cpu->mpuio, 1,                   misc_gpio[5]);
 183     omap_mpuio_out_set(cpu->mpuio, 3,                   misc_gpio[6]);
 184
 185     /* Reset some inputs to initial state.  */
 186     qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_USBDETECT_GPIO]);
 187     qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_USB_OR_DC_GPIO]);
 188     qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[4]);
 189     qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_HEADPHONES_GPIO]);
 190     qemu_irq_lower(omap_mpuio_in_get(cpu->mpuio)[PALMTE_DC_GPIO]);
 191     qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[6]);
 192     qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[7]);
 193     qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[11]);
 194 }
 195
 196 static struct arm_boot_info palmte_binfo = {
 197     .loader_start = OMAP_EMIFF_BASE,
 198     .ram_size = 0x02000000,
 199     .board_id = 0x331,
 200 };
 201
 202 static void palmte_init(ram_addr_t ram_size, int vga_ram_size,
 203                 const char *boot_device,
 204                 const char *kernel_filename, const char *kernel_cmdline,
 205                 const char *initrd_filename, const char *cpu_model)
 206 {
 207     struct omap_mpu_state_s *cpu;
 208     int flash_size = 0x00800000;
 209     int sdram_size = palmte_binfo.ram_size;
 210     int io;
 211     static uint32_t cs0val = 0xffffffff;
 212     static uint32_t cs1val = 0x0000e1a0;
 213     static uint32_t cs2val = 0x0000e1a0;
 214     static uint32_t cs3val = 0xe1a0e1a0;
 215     ram_addr_t phys_flash;
 216     int rom_size, rom_loaded = 0;
 217     DisplayState *ds = get_displaystate();
 218
 219     if (ram_size < flash_size + sdram_size + OMAP15XX_SRAM_SIZE) {
 220         fprintf(stderr, "This architecture uses %i bytes of memory\n",
 221                         flash_size + sdram_size + OMAP15XX_SRAM_SIZE);
 222         exit(1);
 223     }
 224
 225     cpu = omap310_mpu_init(sdram_size, cpu_model);
 226
 227     /* External Flash (EMIFS) */
 228     cpu_register_physical_memory(OMAP_CS0_BASE, flash_size,
 229                     (phys_flash = qemu_ram_alloc(flash_size)) | IO_MEM_ROM);
 230
 231     io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs0val);
 232     cpu_register_physical_memory(OMAP_CS0_BASE + flash_size,
 233                     OMAP_CS0_SIZE - flash_size, io);
 234     io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs1val);
 235     cpu_register_physical_memory(OMAP_CS1_BASE, OMAP_CS1_SIZE, io);
 236     io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs2val);
 237     cpu_register_physical_memory(OMAP_CS2_BASE, OMAP_CS2_SIZE, io);
 238     io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs3val);
 239     cpu_register_physical_memory(OMAP_CS3_BASE, OMAP_CS3_SIZE, io);
 240
 241     palmte_microwire_setup(cpu);
 242
 243     qemu_add_kbd_event_handler(palmte_button_event, cpu);
 244
 245     palmte_gpio_setup(cpu);
 246
 247     /* Setup initial (reset) machine state */
 248     if (nb_option_roms) {
 249         rom_size = get_image_size(option_rom[0]);
 250         if (rom_size > flash_size)
 251             fprintf(stderr, "%s: ROM image too big (%x > %x)\n",
 252                             __FUNCTION__, rom_size, flash_size);
 253         else if (rom_size > 0 && load_image(option_rom[0],
 254                                 phys_ram_base + phys_flash) > 0) {
 255             rom_loaded = 1;
 256             cpu->env->regs[15] = 0x00000000;
 257         } else
 258             fprintf(stderr, "%s: error loading '%s'\n",
 259                             __FUNCTION__, option_rom[0]);
 260     }
 261
 262     if (!rom_loaded && !kernel_filename) {
 263         fprintf(stderr, "Kernel or ROM image must be specified\n");
 264         exit(1);
 265     }
 266
 267     /* Load the kernel.  */
 268     if (kernel_filename) {
 269         /* Start at bootloader.  */
 270         cpu->env->regs[15] = palmte_binfo.loader_start;
 271
 272         palmte_binfo.kernel_filename = kernel_filename;
 273         palmte_binfo.kernel_cmdline = kernel_cmdline;
 274         palmte_binfo.initrd_filename = initrd_filename;
 275         arm_load_kernel(cpu->env, &palmte_binfo);
 276     }
 277
 278     /* FIXME: We shouldn't really be doing this here.  The LCD controller
 279        will set the size once configured, so this just sets an initial
 280        size until the guest activates the display.  */
 281     ds->surface = qemu_resize_displaysurface(ds->surface, 320, 320, 32, 4 * 320);
 282     dpy_resize(ds);
 283 }
 284
 285 QEMUMachine palmte_machine = {
 286     .name = "cheetah",
 287     .desc = "Palm Tungsten|E aka. Cheetah PDA (OMAP310)",
 288     .init = palmte_init,
 289     .ram_require = (0x02000000 + 0x00800000 + OMAP15XX_SRAM_SIZE) |
 290             RAMSIZE_FIXED,
 291 };