disas.c

   1 /* General "disassemble this chunk" code.  Used for debugging. */
   2 #include "config.h"
   3 #include "dis-asm.h"
   4 #include "elf.h"
   5 #include <errno.h>
   6
   7 #include "cpu.h"
   8 #include "exec-all.h"
   9 #include "disas.h"
  10
  11 /* Filled in by elfload.c.  Simplistic, but will do for now. */
  12 struct syminfo *syminfos = NULL;
  13
  14 /* Get LENGTH bytes from info's buffer, at target address memaddr.
  15    Transfer them to myaddr.  */
  16 int
  17 buffer_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length,
  18                    struct disassemble_info *info)
  19 {
  20     if (memaddr < info->buffer_vma
  21         || memaddr + length > info->buffer_vma + info->buffer_length)
  22         /* Out of bounds.  Use EIO because GDB uses it.  */
  23         return EIO;
  24     memcpy (myaddr, info->buffer + (memaddr - info->buffer_vma), length);
  25     return 0;
  26 }
  27
  28 /* Get LENGTH bytes from info's buffer, at target address memaddr.
  29    Transfer them to myaddr.  */
  30 static int
  31 target_read_memory (bfd_vma memaddr,
  32                     bfd_byte *myaddr,
  33                     int length,
  34                     struct disassemble_info *info)
  35 {
  36     int i;
  37     for(i = 0; i < length; i++) {
  38         myaddr[i] = ldub_code(memaddr + i);
  39     }
  40     return 0;
  41 }
  42
  43 /* Print an error message.  We can assume that this is in response to
  44    an error return from buffer_read_memory.  */
  45 void
  46 perror_memory (int status, bfd_vma memaddr, struct disassemble_info *info)
  47 {
  48   if (status != EIO)
  49     /* Can't happen.  */
  50     (*info->fprintf_func) (info->stream, "Unknown error %d\n", status);
  51   else
  52     /* Actually, address between memaddr and memaddr + len was
  53        out of bounds.  */
  54     (*info->fprintf_func) (info->stream,
  55                            "Address 0x%" PRIx64 " is out of bounds.\n", memaddr);
  56 }
  57
  58 /* This could be in a separate file, to save miniscule amounts of space
  59    in statically linked executables.  */
  60
  61 /* Just print the address is hex.  This is included for completeness even
  62    though both GDB and objdump provide their own (to print symbolic
  63    addresses).  */
  64
  65 void
  66 generic_print_address (bfd_vma addr, struct disassemble_info *info)
  67 {
  68     (*info->fprintf_func) (info->stream, "0x%" PRIx64, addr);
  69 }
  70
  71 /* Just return the given address.  */
  72
  73 int
  74 generic_symbol_at_address (bfd_vma addr, struct disassemble_info *info)
  75 {
  76   return 1;
  77 }
  78
  79 bfd_vma bfd_getl32 (const bfd_byte *addr)
  80 {
  81   unsigned long v;
  82
  83   v = (unsigned long) addr[0];
  84   v |= (unsigned long) addr[1] << 8;
  85   v |= (unsigned long) addr[2] << 16;
  86   v |= (unsigned long) addr[3] << 24;
  87   return (bfd_vma) v;
  88 }
  89
  90 bfd_vma bfd_getb32 (const bfd_byte *addr)
  91 {
  92   unsigned long v;
  93
  94   v = (unsigned long) addr[0] << 24;
  95   v |= (unsigned long) addr[1] << 16;
  96   v |= (unsigned long) addr[2] << 8;
  97   v |= (unsigned long) addr[3];
  98   return (bfd_vma) v;
  99 }
 100
 101 bfd_vma bfd_getl16 (const bfd_byte *addr)
 102 {
 103   unsigned long v;
 104
 105   v = (unsigned long) addr[0];
 106   v |= (unsigned long) addr[1] << 8;
 107   return (bfd_vma) v;
 108 }
 109
 110 bfd_vma bfd_getb16 (const bfd_byte *addr)
 111 {
 112   unsigned long v;
 113
 114   v = (unsigned long) addr[0] << 24;
 115   v |= (unsigned long) addr[1] << 16;
 116   return (bfd_vma) v;
 117 }
 118
 119 #ifdef TARGET_ARM
 120 static int
 121 print_insn_thumb1(bfd_vma pc, disassemble_info *info)
 122 {
 123   return print_insn_arm(pc | 1, info);
 124 }
 125 #endif
 126
 127 /* Disassemble this for me please... (debugging). 'flags' has the following
 128    values:
 129     i386 - nonzero means 16 bit code
 130     arm  - nonzero means thumb code
 131     ppc  - nonzero means little endian
 132     other targets - unused
 133  */
 134 void target_disas(FILE *out, target_ulong code, target_ulong size, int flags)
 135 {
 136     target_ulong pc;
 137     int count;
 138     struct disassemble_info disasm_info;
 139     int (*print_insn)(bfd_vma pc, disassemble_info *info);
 140
 141     INIT_DISASSEMBLE_INFO(disasm_info, out, fprintf);
 142
 143     disasm_info.read_memory_func = target_read_memory;
 144     disasm_info.buffer_vma = code;
 145     disasm_info.buffer_length = size;
 146
 147 #ifdef TARGET_WORDS_BIGENDIAN
 148     disasm_info.endian = BFD_ENDIAN_BIG;
 149 #else
 150     disasm_info.endian = BFD_ENDIAN_LITTLE;
 151 #endif
 152 #if defined(TARGET_I386)
 153     if (flags == 2)
 154         disasm_info.mach = bfd_mach_x86_64;
 155     else if (flags == 1)
 156         disasm_info.mach = bfd_mach_i386_i8086;
 157     else
 158         disasm_info.mach = bfd_mach_i386_i386;
 159     print_insn = print_insn_i386;
 160 #elif defined(TARGET_ARM)
 161     if (flags)
 162         print_insn = print_insn_thumb1;
 163     else
 164         print_insn = print_insn_arm;
 165 #elif defined(TARGET_SPARC)
 166     print_insn = print_insn_sparc;
 167 #ifdef TARGET_SPARC64
 168     disasm_info.mach = bfd_mach_sparc_v9b;
 169 #endif
 170 #elif defined(TARGET_PPC)
 171     if (flags >> 16)
 172         disasm_info.endian = BFD_ENDIAN_LITTLE;
 173     if (flags & 0xFFFF) {
 174         /* If we have a precise definitions of the instructions set, use it */
 175         disasm_info.mach = flags & 0xFFFF;
 176     } else {
 177 #ifdef TARGET_PPC64
 178         disasm_info.mach = bfd_mach_ppc64;
 179 #else
 180         disasm_info.mach = bfd_mach_ppc;
 181 #endif
 182     }
 183     print_insn = print_insn_ppc;
 184 #elif defined(TARGET_M68K)
 185     print_insn = print_insn_m68k;
 186 #elif defined(TARGET_MIPS)
 187 #ifdef TARGET_WORDS_BIGENDIAN
 188     print_insn = print_insn_big_mips;
 189 #else
 190     print_insn = print_insn_little_mips;
 191 #endif
 192 #elif defined(TARGET_SH4)
 193     disasm_info.mach = bfd_mach_sh4;
 194     print_insn = print_insn_sh;
 195 #elif defined(TARGET_ALPHA)
 196     disasm_info.mach = bfd_mach_alpha;
 197     print_insn = print_insn_alpha;
 198 #elif defined(TARGET_CRIS)
 199     disasm_info.mach = bfd_mach_cris_v32;
 200     print_insn = print_insn_crisv32;
 201 #else
 202     fprintf(out, "0x" TARGET_FMT_lx
 203             ": Asm output not supported on this arch\n", code);
 204     return;
 205 #endif
 206
 207     for (pc = code; size > 0; pc += count, size -= count) {
 208         fprintf(out, "0x" TARGET_FMT_lx ":  ", pc);
 209         count = print_insn(pc, &disasm_info);
 210 #if 0
 211         {
 212             int i;
 213             uint8_t b;
 214             fprintf(out, " {");
 215             for(i = 0; i < count; i++) {
 216                 target_read_memory(pc + i, &b, 1, &disasm_info);
 217                 fprintf(out, " %02x", b);
 218             }
 219             fprintf(out, " }");
 220         }
 221 #endif
 222         fprintf(out, "\n");
 223         if (count < 0)
 224             break;
 225     }
 226 }
 227
 228 /* Disassemble this for me please... (debugging). */
 229 void disas(FILE *out, void *code, unsigned long size)
 230 {
 231     unsigned long pc;
 232     int count;
 233     struct disassemble_info disasm_info;
 234     int (*print_insn)(bfd_vma pc, disassemble_info *info);
 235
 236     INIT_DISASSEMBLE_INFO(disasm_info, out, fprintf);
 237
 238     disasm_info.buffer = code;
 239     disasm_info.buffer_vma = (unsigned long)code;
 240     disasm_info.buffer_length = size;
 241
 242 #ifdef WORDS_BIGENDIAN
 243     disasm_info.endian = BFD_ENDIAN_BIG;
 244 #else
 245     disasm_info.endian = BFD_ENDIAN_LITTLE;
 246 #endif
 247 #if defined(__i386__)
 248     disasm_info.mach = bfd_mach_i386_i386;
 249     print_insn = print_insn_i386;
 250 #elif defined(__x86_64__)
 251     disasm_info.mach = bfd_mach_x86_64;
 252     print_insn = print_insn_i386;
 253 #elif defined(_ARCH_PPC)
 254     print_insn = print_insn_ppc;
 255 #elif defined(__alpha__)
 256     print_insn = print_insn_alpha;
 257 #elif defined(__sparc__)
 258     print_insn = print_insn_sparc;
 259 #if defined(__sparc_v8plus__) || defined(__sparc_v8plusa__) || defined(__sparc_v9__)
 260     disasm_info.mach = bfd_mach_sparc_v9b;
 261 #endif
 262 #elif defined(__arm__)
 263     print_insn = print_insn_arm;
 264 #elif defined(__MIPSEB__)
 265     print_insn = print_insn_big_mips;
 266 #elif defined(__MIPSEL__)
 267     print_insn = print_insn_little_mips;
 268 #elif defined(__m68k__)
 269     print_insn = print_insn_m68k;
 270 #elif defined(__s390__)
 271     print_insn = print_insn_s390;
 272 #elif defined(__hppa__)
 273     print_insn = print_insn_hppa;
 274 #else
 275     fprintf(out, "0x%lx: Asm output not supported on this arch\n",
 276             (long) code);
 277     return;
 278 #endif
 279     for (pc = (unsigned long)code; size > 0; pc += count, size -= count) {
 280         fprintf(out, "0x%08lx:  ", pc);
 281 #ifdef __arm__
 282         /* since data is included in the code, it is better to
 283            display code data too */
 284         fprintf(out, "%08x  ", (int)bfd_getl32((const bfd_byte *)pc));
 285 #endif
 286         count = print_insn(pc, &disasm_info);
 287         fprintf(out, "\n");
 288         if (count < 0)
 289             break;
 290     }
 291 }
 292
 293 /* Look up symbol for debugging purpose.  Returns "" if unknown. */
 294 const char *lookup_symbol(target_ulong orig_addr)
 295 {
 296     const char *symbol = "";
 297     struct syminfo *s;
 298
 299     for (s = syminfos; s; s = s->next) {
 300         symbol = s->lookup_symbol(s, orig_addr);
 301         if (symbol[0] != '\0') {
 302             break;
 303         }
 304     }
 305
 306     return symbol;
 307 }
 308
 309 #if !defined(CONFIG_USER_ONLY)
 310
 311 void term_vprintf(const char *fmt, va_list ap);
 312 void term_printf(const char *fmt, ...);
 313
 314 static int monitor_disas_is_physical;
 315 static CPUState *monitor_disas_env;
 316
 317 static int
 318 monitor_read_memory (bfd_vma memaddr, bfd_byte *myaddr, int length,
 319                      struct disassemble_info *info)
 320 {
 321     if (monitor_disas_is_physical) {
 322         cpu_physical_memory_rw(memaddr, myaddr, length, 0);
 323     } else {
 324         cpu_memory_rw_debug(monitor_disas_env, memaddr,myaddr, length, 0);
 325     }
 326     return 0;
 327 }
 328
 329 static int monitor_fprintf(FILE *stream, const char *fmt, ...)
 330 {
 331     va_list ap;
 332     va_start(ap, fmt);
 333     term_vprintf(fmt, ap);
 334     va_end(ap);
 335     return 0;
 336 }
 337
 338 void monitor_disas(CPUState *env,
 339                    target_ulong pc, int nb_insn, int is_physical, int flags)
 340 {
 341     int count, i;
 342     struct disassemble_info disasm_info;
 343     int (*print_insn)(bfd_vma pc, disassemble_info *info);
 344
 345     INIT_DISASSEMBLE_INFO(disasm_info, NULL, monitor_fprintf);
 346
 347     monitor_disas_env = env;
 348     monitor_disas_is_physical = is_physical;
 349     disasm_info.read_memory_func = monitor_read_memory;
 350
 351     disasm_info.buffer_vma = pc;
 352
 353 #ifdef TARGET_WORDS_BIGENDIAN
 354     disasm_info.endian = BFD_ENDIAN_BIG;
 355 #else
 356     disasm_info.endian = BFD_ENDIAN_LITTLE;
 357 #endif
 358 #if defined(TARGET_I386)
 359     if (flags == 2)
 360         disasm_info.mach = bfd_mach_x86_64;
 361     else if (flags == 1)
 362         disasm_info.mach = bfd_mach_i386_i8086;
 363     else
 364         disasm_info.mach = bfd_mach_i386_i386;
 365     print_insn = print_insn_i386;
 366 #elif defined(TARGET_ARM)
 367     print_insn = print_insn_arm;
 368 #elif defined(TARGET_ALPHA)
 369     print_insn = print_insn_alpha;
 370 #elif defined(TARGET_SPARC)
 371     print_insn = print_insn_sparc;
 372 #ifdef TARGET_SPARC64
 373     disasm_info.mach = bfd_mach_sparc_v9b;
 374 #endif
 375 #elif defined(TARGET_PPC)
 376 #ifdef TARGET_PPC64
 377     disasm_info.mach = bfd_mach_ppc64;
 378 #else
 379     disasm_info.mach = bfd_mach_ppc;
 380 #endif
 381     print_insn = print_insn_ppc;
 382 #elif defined(TARGET_M68K)
 383     print_insn = print_insn_m68k;
 384 #elif defined(TARGET_MIPS)
 385 #ifdef TARGET_WORDS_BIGENDIAN
 386     print_insn = print_insn_big_mips;
 387 #else
 388     print_insn = print_insn_little_mips;
 389 #endif
 390 #else
 391     term_printf("0x" TARGET_FMT_lx
 392                 ": Asm output not supported on this arch\n", pc);
 393     return;
 394 #endif
 395
 396     for(i = 0; i < nb_insn; i++) {
 397         term_printf("0x" TARGET_FMT_lx ":  ", pc);
 398         count = print_insn(pc, &disasm_info);
 399         term_printf("\n");
 400         if (count < 0)
 401             break;
 402         pc += count;
 403     }
 404 }
 405 #endif