hw/mcf5206.c

   1 /*
   2  * Motorola ColdFire MCF5206 SoC embedded peripheral emulation.
   3  *
   4  * Copyright (c) 2007 CodeSourcery.
   5  *
   6  * This code is licenced under the GPL
   7  */
   8 #include "hw.h"
   9 #include "mcf.h"
  10 #include "qemu-timer.h"
  11 #include "sysemu.h"
  12
  13 /* General purpose timer module.  */
  14 typedef struct {
  15     uint16_t tmr;
  16     uint16_t trr;
  17     uint16_t tcr;
  18     uint16_t ter;
  19     ptimer_state *timer;
  20     qemu_irq irq;
  21     int irq_state;
  22 } m5206_timer_state;
  23
  24 #define TMR_RST 0x01
  25 #define TMR_CLK 0x06
  26 #define TMR_FRR 0x08
  27 #define TMR_ORI 0x10
  28 #define TMR_OM  0x20
  29 #define TMR_CE  0xc0
  30
  31 #define TER_CAP 0x01
  32 #define TER_REF 0x02
  33
  34 static void m5206_timer_update(m5206_timer_state *s)
  35 {
  36     if ((s->tmr & TMR_ORI) != 0 && (s->ter & TER_REF))
  37         qemu_irq_raise(s->irq);
  38     else
  39         qemu_irq_lower(s->irq);
  40 }
  41
  42 static void m5206_timer_reset(m5206_timer_state *s)
  43 {
  44     s->tmr = 0;
  45     s->trr = 0;
  46 }
  47
  48 static void m5206_timer_recalibrate(m5206_timer_state *s)
  49 {
  50     int prescale;
  51     int mode;
  52
  53     ptimer_stop(s->timer);
  54
  55     if ((s->tmr & TMR_RST) == 0)
  56         return;
  57
  58     prescale = (s->tmr >> 8) + 1;
  59     mode = (s->tmr >> 1) & 3;
  60     if (mode == 2)
  61         prescale *= 16;
  62
  63     if (mode == 3 || mode == 0)
  64         cpu_abort(cpu_single_env,
  65                   "m5206_timer: mode %d not implemented\n", mode);
  66     if ((s->tmr & TMR_FRR) == 0)
  67         cpu_abort(cpu_single_env,
  68                   "m5206_timer: free running mode not implemented\n");
  69
  70     /* Assume 66MHz system clock.  */
  71     ptimer_set_freq(s->timer, 66000000 / prescale);
  72
  73     ptimer_set_limit(s->timer, s->trr, 0);
  74
  75     ptimer_run(s->timer, 0);
  76 }
  77
  78 static void m5206_timer_trigger(void *opaque)
  79 {
  80     m5206_timer_state *s = (m5206_timer_state *)opaque;
  81     s->ter |= TER_REF;
  82     m5206_timer_update(s);
  83 }
  84
  85 static uint32_t m5206_timer_read(m5206_timer_state *s, uint32_t addr)
  86 {
  87     switch (addr) {
  88     case 0:
  89         return s->tmr;
  90     case 4:
  91         return s->trr;
  92     case 8:
  93         return s->tcr;
  94     case 0xc:
  95         return s->trr - ptimer_get_count(s->timer);
  96     case 0x11:
  97         return s->ter;
  98     default:
  99         return 0;
 100     }
 101 }
 102
 103 static void m5206_timer_write(m5206_timer_state *s, uint32_t addr, uint32_t val)
 104 {
 105     switch (addr) {
 106     case 0:
 107         if ((s->tmr & TMR_RST) != 0 && (val & TMR_RST) == 0) {
 108             m5206_timer_reset(s);
 109         }
 110         s->tmr = val;
 111         m5206_timer_recalibrate(s);
 112         break;
 113     case 4:
 114         s->trr = val;
 115         m5206_timer_recalibrate(s);
 116         break;
 117     case 8:
 118         s->tcr = val;
 119         break;
 120     case 0xc:
 121         ptimer_set_count(s->timer, val);
 122         break;
 123     case 0x11:
 124         s->ter &= ~val;
 125         break;
 126     default:
 127         break;
 128     }
 129     m5206_timer_update(s);
 130 }
 131
 132 static m5206_timer_state *m5206_timer_init(qemu_irq irq)
 133 {
 134     m5206_timer_state *s;
 135     QEMUBH *bh;
 136
 137     s = (m5206_timer_state *)qemu_mallocz(sizeof(m5206_timer_state));
 138     bh = qemu_bh_new(m5206_timer_trigger, s);
 139     s->timer = ptimer_init(bh);
 140     s->irq = irq;
 141     m5206_timer_reset(s);
 142     return s;
 143 }
 144
 145 /* System Integration Module.  */
 146
 147 typedef struct {
 148     CPUState *env;
 149     m5206_timer_state *timer[2];
 150     void *uart[2];
 151     uint8_t scr;
 152     uint8_t icr[14];
 153     uint16_t imr; /* 1 == interrupt is masked.  */
 154     uint16_t ipr;
 155     uint8_t rsr;
 156     uint8_t swivr;
 157     uint8_t par;
 158     /* Include the UART vector registers here.  */
 159     uint8_t uivr[2];
 160 } m5206_mbar_state;
 161
 162 /* Interrupt controller.  */
 163
 164 static int m5206_find_pending_irq(m5206_mbar_state *s)
 165 {
 166     int level;
 167     int vector;
 168     uint16_t active;
 169     int i;
 170
 171     level = 0;
 172     vector = 0;
 173     active = s->ipr & ~s->imr;
 174     if (!active)
 175         return 0;
 176
 177     for (i = 1; i < 14; i++) {
 178         if (active & (1 << i)) {
 179             if ((s->icr[i] & 0x1f) > level) {
 180                 level = s->icr[i] & 0x1f;
 181                 vector = i;
 182             }
 183         }
 184     }
 185
 186     if (level < 4)
 187         vector = 0;
 188
 189     return vector;
 190 }
 191
 192 static void m5206_mbar_update(m5206_mbar_state *s)
 193 {
 194     int irq;
 195     int vector;
 196     int level;
 197
 198     irq = m5206_find_pending_irq(s);
 199     if (irq) {
 200         int tmp;
 201         tmp = s->icr[irq];
 202         level = (tmp >> 2) & 7;
 203         if (tmp & 0x80) {
 204             /* Autovector.  */
 205             vector = 24 + level;
 206         } else {
 207             switch (irq) {
 208             case 8: /* SWT */
 209                 vector = s->swivr;
 210                 break;
 211             case 12: /* UART1 */
 212                 vector = s->uivr[0];
 213                 break;
 214             case 13: /* UART2 */
 215                 vector = s->uivr[1];
 216                 break;
 217             default:
 218                 /* Unknown vector.  */
 219                 fprintf(stderr, "Unhandled vector for IRQ %d\n", irq);
 220                 vector = 0xf;
 221                 break;
 222             }
 223         }
 224     } else {
 225         level = 0;
 226         vector = 0;
 227     }
 228     m68k_set_irq_level(s->env, level, vector);
 229 }
 230
 231 static void m5206_mbar_set_irq(void *opaque, int irq, int level)
 232 {
 233     m5206_mbar_state *s = (m5206_mbar_state *)opaque;
 234     if (level) {
 235         s->ipr |= 1 << irq;
 236     } else {
 237         s->ipr &= ~(1 << irq);
 238     }
 239     m5206_mbar_update(s);
 240 }
 241
 242 /* System Integration Module.  */
 243
 244 static void m5206_mbar_reset(m5206_mbar_state *s)
 245 {
 246     s->scr = 0xc0;
 247     s->icr[1] = 0x04;
 248     s->icr[2] = 0x08;
 249     s->icr[3] = 0x0c;
 250     s->icr[4] = 0x10;
 251     s->icr[5] = 0x14;
 252     s->icr[6] = 0x18;
 253     s->icr[7] = 0x1c;
 254     s->icr[8] = 0x1c;
 255     s->icr[9] = 0x80;
 256     s->icr[10] = 0x80;
 257     s->icr[11] = 0x80;
 258     s->icr[12] = 0x00;
 259     s->icr[13] = 0x00;
 260     s->imr = 0x3ffe;
 261     s->rsr = 0x80;
 262     s->swivr = 0x0f;
 263     s->par = 0;
 264 }
 265
 266 static uint32_t m5206_mbar_read(m5206_mbar_state *s, uint32_t offset)
 267 {
 268     if (offset >= 0x100 && offset < 0x120) {
 269         return m5206_timer_read(s->timer[0], offset - 0x100);
 270     } else if (offset >= 0x120 && offset < 0x140) {
 271         return m5206_timer_read(s->timer[1], offset - 0x120);
 272     } else if (offset >= 0x140 && offset < 0x160) {
 273         return mcf_uart_read(s->uart[0], offset - 0x140);
 274     } else if (offset >= 0x180 && offset < 0x1a0) {
 275         return mcf_uart_read(s->uart[1], offset - 0x180);
 276     }
 277     switch (offset) {
 278     case 0x03: return s->scr;
 279     case 0x14 ... 0x20: return s->icr[offset - 0x13];
 280     case 0x36: return s->imr;
 281     case 0x3a: return s->ipr;
 282     case 0x40: return s->rsr;
 283     case 0x41: return 0;
 284     case 0x42: return s->swivr;
 285     case 0x50:
 286         /* DRAM mask register.  */
 287         /* FIXME: currently hardcoded to 128Mb.  */
 288         {
 289             uint32_t mask = ~0;
 290             while (mask > ram_size)
 291                 mask >>= 1;
 292             return mask & 0x0ffe0000;
 293         }
 294     case 0x5c: return 1; /* DRAM bank 1 empty.  */
 295     case 0xcb: return s->par;
 296     case 0x170: return s->uivr[0];
 297     case 0x1b0: return s->uivr[1];
 298     }
 299     cpu_abort(cpu_single_env, "Bad MBAR read offset 0x%x", (int)offset);
 300     return 0;
 301 }
 302
 303 static void m5206_mbar_write(m5206_mbar_state *s, uint32_t offset,
 304                              uint32_t value)
 305 {
 306     if (offset >= 0x100 && offset < 0x120) {
 307         m5206_timer_write(s->timer[0], offset - 0x100, value);
 308         return;
 309     } else if (offset >= 0x120 && offset < 0x140) {
 310         m5206_timer_write(s->timer[1], offset - 0x120, value);
 311         return;
 312     } else if (offset >= 0x140 && offset < 0x160) {
 313         mcf_uart_write(s->uart[0], offset - 0x140, value);
 314         return;
 315     } else if (offset >= 0x180 && offset < 0x1a0) {
 316         mcf_uart_write(s->uart[1], offset - 0x180, value);
 317         return;
 318     }
 319     switch (offset) {
 320     case 0x03:
 321         s->scr = value;
 322         break;
 323     case 0x14 ... 0x20:
 324         s->icr[offset - 0x13] = value;
 325         m5206_mbar_update(s);
 326         break;
 327     case 0x36:
 328         s->imr = value;
 329         m5206_mbar_update(s);
 330         break;
 331     case 0x40:
 332         s->rsr &= ~value;
 333         break;
 334     case 0x41:
 335         /* TODO: implement watchdog.  */
 336         break;
 337     case 0x42:
 338         s->swivr = value;
 339         break;
 340     case 0xcb:
 341         s->par = value;
 342         break;
 343     case 0x170:
 344         s->uivr[0] = value;
 345         break;
 346     case 0x178: case 0x17c: case 0x1c8: case 0x1bc:
 347         /* Not implemented: UART Output port bits.  */
 348         break;
 349     case 0x1b0:
 350         s->uivr[1] = value;
 351         break;
 352     default:
 353         cpu_abort(cpu_single_env, "Bad MBAR write offset 0x%x", (int)offset);
 354         break;
 355     }
 356 }
 357
 358 /* Internal peripherals use a variety of register widths.
 359    This lookup table allows a single routine to handle all of them.  */
 360 static const int m5206_mbar_width[] =
 361 {
 362   /* 000-040 */ 1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1,  2, 2, 2, 2,
 363   /* 040-080 */ 1, 2, 2, 2,  4, 1, 2, 4,  1, 2, 4, 2,  2, 4, 2, 2,
 364   /* 080-0c0 */ 4, 2, 2, 4,  2, 2, 4, 2,  2, 4, 2, 2,  4, 2, 2, 4,
 365   /* 0c0-100 */ 2, 2, 1, 0,  0, 0, 0, 0,  0, 0, 0, 0,  0, 0, 0, 0,
 366   /* 100-140 */ 2, 2, 2, 2,  1, 0, 0, 0,  2, 2, 2, 2,  1, 0, 0, 0,
 367   /* 140-180 */ 1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1,
 368   /* 180-1c0 */ 1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1,
 369   /* 1c0-200 */ 1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1,
 370 };
 371
 372 static uint32_t m5206_mbar_readw(void *opaque, target_phys_addr_t offset);
 373 static uint32_t m5206_mbar_readl(void *opaque, target_phys_addr_t offset);
 374
 375 static uint32_t m5206_mbar_readb(void *opaque, target_phys_addr_t offset)
 376 {
 377     m5206_mbar_state *s = (m5206_mbar_state *)opaque;
 378     offset &= 0x3ff;
 379     if (offset > 0x200) {
 380         cpu_abort(cpu_single_env, "Bad MBAR read offset 0x%x", (int)offset);
 381     }
 382     if (m5206_mbar_width[offset >> 2] > 1) {
 383         uint16_t val;
 384         val = m5206_mbar_readw(opaque, offset & ~1);
 385         if ((offset & 1) == 0) {
 386             val >>= 8;
 387         }
 388         return val & 0xff;
 389     }
 390     return m5206_mbar_read(s, offset);
 391 }
 392
 393 static uint32_t m5206_mbar_readw(void *opaque, target_phys_addr_t offset)
 394 {
 395     m5206_mbar_state *s = (m5206_mbar_state *)opaque;
 396     int width;
 397     offset &= 0x3ff;
 398     if (offset > 0x200) {
 399         cpu_abort(cpu_single_env, "Bad MBAR read offset 0x%x", (int)offset);
 400     }
 401     width = m5206_mbar_width[offset >> 2];
 402     if (width > 2) {
 403         uint32_t val;
 404         val = m5206_mbar_readl(opaque, offset & ~3);
 405         if ((offset & 3) == 0)
 406             val >>= 16;
 407         return val & 0xffff;
 408     } else if (width < 2) {
 409         uint16_t val;
 410         val = m5206_mbar_readb(opaque, offset) << 8;
 411         val |= m5206_mbar_readb(opaque, offset + 1);
 412         return val;
 413     }
 414     return m5206_mbar_read(s, offset);
 415 }
 416
 417 static uint32_t m5206_mbar_readl(void *opaque, target_phys_addr_t offset)
 418 {
 419     m5206_mbar_state *s = (m5206_mbar_state *)opaque;
 420     int width;
 421     offset &= 0x3ff;
 422     if (offset > 0x200) {
 423         cpu_abort(cpu_single_env, "Bad MBAR read offset 0x%x", (int)offset);
 424     }
 425     width = m5206_mbar_width[offset >> 2];
 426     if (width < 4) {
 427         uint32_t val;
 428         val = m5206_mbar_readw(opaque, offset) << 16;
 429         val |= m5206_mbar_readw(opaque, offset + 2);
 430         return val;
 431     }
 432     return m5206_mbar_read(s, offset);
 433 }
 434
 435 static void m5206_mbar_writew(void *opaque, target_phys_addr_t offset,
 436                               uint32_t value);
 437 static void m5206_mbar_writel(void *opaque, target_phys_addr_t offset,
 438                               uint32_t value);
 439
 440 static void m5206_mbar_writeb(void *opaque, target_phys_addr_t offset,
 441                               uint32_t value)
 442 {
 443     m5206_mbar_state *s = (m5206_mbar_state *)opaque;
 444     int width;
 445     offset &= 0x3ff;
 446     if (offset > 0x200) {
 447         cpu_abort(cpu_single_env, "Bad MBAR write offset 0x%x", (int)offset);
 448     }
 449     width = m5206_mbar_width[offset >> 2];
 450     if (width > 1) {
 451         uint32_t tmp;
 452         tmp = m5206_mbar_readw(opaque, offset & ~1);
 453         if (offset & 1) {
 454             tmp = (tmp & 0xff00) | value;
 455         } else {
 456             tmp = (tmp & 0x00ff) | (value << 8);
 457         }
 458         m5206_mbar_writew(opaque, offset & ~1, tmp);
 459         return;
 460     }
 461     m5206_mbar_write(s, offset, value);
 462 }
 463
 464 static void m5206_mbar_writew(void *opaque, target_phys_addr_t offset,
 465                               uint32_t value)
 466 {
 467     m5206_mbar_state *s = (m5206_mbar_state *)opaque;
 468     int width;
 469     offset &= 0x3ff;
 470     if (offset > 0x200) {
 471         cpu_abort(cpu_single_env, "Bad MBAR write offset 0x%x", (int)offset);
 472     }
 473     width = m5206_mbar_width[offset >> 2];
 474     if (width > 2) {
 475         uint32_t tmp;
 476         tmp = m5206_mbar_readl(opaque, offset & ~3);
 477         if (offset & 3) {
 478             tmp = (tmp & 0xffff0000) | value;
 479         } else {
 480             tmp = (tmp & 0x0000ffff) | (value << 16);
 481         }
 482         m5206_mbar_writel(opaque, offset & ~3, tmp);
 483         return;
 484     } else if (width < 2) {
 485         m5206_mbar_writeb(opaque, offset, value >> 8);
 486         m5206_mbar_writeb(opaque, offset + 1, value & 0xff);
 487         return;
 488     }
 489     m5206_mbar_write(s, offset, value);
 490 }
 491
 492 static void m5206_mbar_writel(void *opaque, target_phys_addr_t offset,
 493                               uint32_t value)
 494 {
 495     m5206_mbar_state *s = (m5206_mbar_state *)opaque;
 496     int width;
 497     offset &= 0x3ff;
 498     if (offset > 0x200) {
 499         cpu_abort(cpu_single_env, "Bad MBAR write offset 0x%x", (int)offset);
 500     }
 501     width = m5206_mbar_width[offset >> 2];
 502     if (width < 4) {
 503         m5206_mbar_writew(opaque, offset, value >> 16);
 504         m5206_mbar_writew(opaque, offset + 2, value & 0xffff);
 505         return;
 506     }
 507     m5206_mbar_write(s, offset, value);
 508 }
 509
 510 static CPUReadMemoryFunc *m5206_mbar_readfn[] = {
 511    m5206_mbar_readb,
 512    m5206_mbar_readw,
 513    m5206_mbar_readl
 514 };
 515
 516 static CPUWriteMemoryFunc *m5206_mbar_writefn[] = {
 517    m5206_mbar_writeb,
 518    m5206_mbar_writew,
 519    m5206_mbar_writel
 520 };
 521
 522 qemu_irq *mcf5206_init(uint32_t base, CPUState *env)
 523 {
 524     m5206_mbar_state *s;
 525     qemu_irq *pic;
 526     int iomemtype;
 527
 528     s = (m5206_mbar_state *)qemu_mallocz(sizeof(m5206_mbar_state));
 529     iomemtype = cpu_register_io_memory(0, m5206_mbar_readfn,
 530                                        m5206_mbar_writefn, s);
 531     cpu_register_physical_memory(base, 0x00001000, iomemtype);
 532
 533     pic = qemu_allocate_irqs(m5206_mbar_set_irq, s, 14);
 534     s->timer[0] = m5206_timer_init(pic[9]);
 535     s->timer[1] = m5206_timer_init(pic[10]);
 536     s->uart[0] = mcf_uart_init(pic[12], serial_hds[0]);
 537     s->uart[1] = mcf_uart_init(pic[13], serial_hds[1]);
 538     s->env = env;
 539
 540     m5206_mbar_reset(s);
 541     return pic;
 542 }