hw/fmopl.c

   1 /*
   2 **
   3 ** File: fmopl.c -- software implementation of FM sound generator
   4 **
   5 ** Copyright (C) 1999,2000 Tatsuyuki Satoh , MultiArcadeMachineEmurator development
   6 **
   7 ** Version 0.37a
   8 **
   9 */
  10
  11 /*
  12         preliminary :
  13         Problem :
  14         note:
  15 */
  16
  17 /* This version of fmopl.c is a fork of the MAME one, relicensed under the LGPL.
  18  *
  19  * This library is free software; you can redistribute it and/or
  20  * modify it under the terms of the GNU Lesser General Public
  21  * License as published by the Free Software Foundation; either
  22  * version 2.1 of the License, or (at your option) any later version.
  23  *
  24  * This library is distributed in the hope that it will be useful,
  25  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  26  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  27  * Lesser General Public License for more details.
  28  *
  29  * You should have received a copy of the GNU Lesser General Public
  30  * License along with this library; if not, write to the Free Software
  31  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA  02110-1301 USA
  32  */
  33
  34 #define INLINE          __inline
  35 #define HAS_YM3812      1
  36
  37 #include <stdio.h>
  38 #include <stdlib.h>
  39 #include <string.h>
  40 #include <stdarg.h>
  41 #include <math.h>
  42 //#include "driver.h"           /* use M.A.M.E. */
  43 #include "fmopl.h"
  44
  45 #ifndef PI
  46 #define PI 3.14159265358979323846
  47 #endif
  48
  49 /* -------------------- for debug --------------------- */
  50 /* #define OPL_OUTPUT_LOG */
  51 #ifdef OPL_OUTPUT_LOG
  52 static FILE *opl_dbg_fp = NULL;
  53 static FM_OPL *opl_dbg_opl[16];
  54 static int opl_dbg_maxchip,opl_dbg_chip;
  55 #endif
  56
  57 /* -------------------- preliminary define section --------------------- */
  58 /* attack/decay rate time rate */
  59 #define OPL_ARRATE     141280  /* RATE 4 =  2826.24ms @ 3.6MHz */
  60 #define OPL_DRRATE    1956000  /* RATE 4 = 39280.64ms @ 3.6MHz */
  61
  62 #define DELTAT_MIXING_LEVEL (1) /* DELTA-T ADPCM MIXING LEVEL */
  63
  64 #define FREQ_BITS 24                    /* frequency turn          */
  65
  66 /* counter bits = 20 , octerve 7 */
  67 #define FREQ_RATE   (1<<(FREQ_BITS-20))
  68 #define TL_BITS    (FREQ_BITS+2)
  69
  70 /* final output shift , limit minimum and maximum */
  71 #define OPL_OUTSB   (TL_BITS+3-16)              /* OPL output final shift 16bit */
  72 #define OPL_MAXOUT (0x7fff<<OPL_OUTSB)
  73 #define OPL_MINOUT (-0x8000<<OPL_OUTSB)
  74
  75 /* -------------------- quality selection --------------------- */
  76
  77 /* sinwave entries */
  78 /* used static memory = SIN_ENT * 4 (byte) */
  79 #define SIN_ENT 2048
  80
  81 /* output level entries (envelope,sinwave) */
  82 /* envelope counter lower bits */
  83 #define ENV_BITS 16
  84 /* envelope output entries */
  85 #define EG_ENT   4096
  86 /* used dynamic memory = EG_ENT*4*4(byte)or EG_ENT*6*4(byte) */
  87 /* used static  memory = EG_ENT*4 (byte)                     */
  88
  89 #define EG_OFF   ((2*EG_ENT)<<ENV_BITS)  /* OFF          */
  90 #define EG_DED   EG_OFF
  91 #define EG_DST   (EG_ENT<<ENV_BITS)      /* DECAY  START */
  92 #define EG_AED   EG_DST
  93 #define EG_AST   0                       /* ATTACK START */
  94
  95 #define EG_STEP (96.0/EG_ENT) /* OPL is 0.1875 dB step  */
  96
  97 /* LFO table entries */
  98 #define VIB_ENT 512
  99 #define VIB_SHIFT (32-9)
 100 #define AMS_ENT 512
 101 #define AMS_SHIFT (32-9)
 102
 103 #define VIB_RATE 256
 104
 105 /* -------------------- local defines , macros --------------------- */
 106
 107 /* register number to channel number , slot offset */
 108 #define SLOT1 0
 109 #define SLOT2 1
 110
 111 /* envelope phase */
 112 #define ENV_MOD_RR  0x00
 113 #define ENV_MOD_DR  0x01
 114 #define ENV_MOD_AR  0x02
 115
 116 /* -------------------- tables --------------------- */
 117 static const int slot_array[32]=
 118 {
 119          0, 2, 4, 1, 3, 5,-1,-1,
 120          6, 8,10, 7, 9,11,-1,-1,
 121         12,14,16,13,15,17,-1,-1,
 122         -1,-1,-1,-1,-1,-1,-1,-1
 123 };
 124
 125 /* key scale level */
 126 /* table is 3dB/OCT , DV converts this in TL step at 6dB/OCT */
 127 #define DV (EG_STEP/2)
 128 static const UINT32 KSL_TABLE[8*16]=
 129 {
 130         /* OCT 0 */
 131          0.000/DV, 0.000/DV, 0.000/DV, 0.000/DV,
 132          0.000/DV, 0.000/DV, 0.000/DV, 0.000/DV,
 133          0.000/DV, 0.000/DV, 0.000/DV, 0.000/DV,
 134          0.000/DV, 0.000/DV, 0.000/DV, 0.000/DV,
 135         /* OCT 1 */
 136          0.000/DV, 0.000/DV, 0.000/DV, 0.000/DV,
 137          0.000/DV, 0.000/DV, 0.000/DV, 0.000/DV,
 138          0.000/DV, 0.750/DV, 1.125/DV, 1.500/DV,
 139          1.875/DV, 2.250/DV, 2.625/DV, 3.000/DV,
 140         /* OCT 2 */
 141          0.000/DV, 0.000/DV, 0.000/DV, 0.000/DV,
 142          0.000/DV, 1.125/DV, 1.875/DV, 2.625/DV,
 143          3.000/DV, 3.750/DV, 4.125/DV, 4.500/DV,
 144          4.875/DV, 5.250/DV, 5.625/DV, 6.000/DV,
 145         /* OCT 3 */
 146          0.000/DV, 0.000/DV, 0.000/DV, 1.875/DV,
 147          3.000/DV, 4.125/DV, 4.875/DV, 5.625/DV,
 148          6.000/DV, 6.750/DV, 7.125/DV, 7.500/DV,
 149          7.875/DV, 8.250/DV, 8.625/DV, 9.000/DV,
 150         /* OCT 4 */
 151          0.000/DV, 0.000/DV, 3.000/DV, 4.875/DV,
 152          6.000/DV, 7.125/DV, 7.875/DV, 8.625/DV,
 153          9.000/DV, 9.750/DV,10.125/DV,10.500/DV,
 154         10.875/DV,11.250/DV,11.625/DV,12.000/DV,
 155         /* OCT 5 */
 156          0.000/DV, 3.000/DV, 6.000/DV, 7.875/DV,
 157          9.000/DV,10.125/DV,10.875/DV,11.625/DV,
 158         12.000/DV,12.750/DV,13.125/DV,13.500/DV,
 159         13.875/DV,14.250/DV,14.625/DV,15.000/DV,
 160         /* OCT 6 */
 161          0.000/DV, 6.000/DV, 9.000/DV,10.875/DV,
 162         12.000/DV,13.125/DV,13.875/DV,14.625/DV,
 163         15.000/DV,15.750/DV,16.125/DV,16.500/DV,
 164         16.875/DV,17.250/DV,17.625/DV,18.000/DV,
 165         /* OCT 7 */
 166          0.000/DV, 9.000/DV,12.000/DV,13.875/DV,
 167         15.000/DV,16.125/DV,16.875/DV,17.625/DV,
 168         18.000/DV,18.750/DV,19.125/DV,19.500/DV,
 169         19.875/DV,20.250/DV,20.625/DV,21.000/DV
 170 };
 171 #undef DV
 172
 173 /* sustain lebel table (3db per step) */
 174 /* 0 - 15: 0, 3, 6, 9,12,15,18,21,24,27,30,33,36,39,42,93 (dB)*/
 175 #define SC(db) (db*((3/EG_STEP)*(1<<ENV_BITS)))+EG_DST
 176 static const INT32 SL_TABLE[16]={
 177  SC( 0),SC( 1),SC( 2),SC(3 ),SC(4 ),SC(5 ),SC(6 ),SC( 7),
 178  SC( 8),SC( 9),SC(10),SC(11),SC(12),SC(13),SC(14),SC(31)
 179 };
 180 #undef SC
 181
 182 #define TL_MAX (EG_ENT*2) /* limit(tl + ksr + envelope) + sinwave */
 183 /* TotalLevel : 48 24 12  6  3 1.5 0.75 (dB) */
 184 /* TL_TABLE[ 0      to TL_MAX          ] : plus  section */
 185 /* TL_TABLE[ TL_MAX to TL_MAX+TL_MAX-1 ] : minus section */
 186 static INT32 *TL_TABLE;
 187
 188 /* pointers to TL_TABLE with sinwave output offset */
 189 static INT32 **SIN_TABLE;
 190
 191 /* LFO table */
 192 static INT32 *AMS_TABLE;
 193 static INT32 *VIB_TABLE;
 194
 195 /* envelope output curve table */
 196 /* attack + decay + OFF */
 197 static INT32 ENV_CURVE[2*EG_ENT+1];
 198
 199 /* multiple table */
 200 #define ML 2
 201 static const UINT32 MUL_TABLE[16]= {
 202 /* 1/2, 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,15 */
 203    0.50*ML, 1.00*ML, 2.00*ML, 3.00*ML, 4.00*ML, 5.00*ML, 6.00*ML, 7.00*ML,
 204    8.00*ML, 9.00*ML,10.00*ML,10.00*ML,12.00*ML,12.00*ML,15.00*ML,15.00*ML
 205 };
 206 #undef ML
 207
 208 /* dummy attack / decay rate ( when rate == 0 ) */
 209 static INT32 RATE_0[16]=
 210 {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
 211
 212 /* -------------------- static state --------------------- */
 213
 214 /* lock level of common table */
 215 static int num_lock = 0;
 216
 217 /* work table */
 218 static void *cur_chip = NULL;   /* current chip point */
 219 /* currenct chip state */
 220 /* static OPLSAMPLE  *bufL,*bufR; */
 221 static OPL_CH *S_CH;
 222 static OPL_CH *E_CH;
 223 OPL_SLOT *SLOT7_1,*SLOT7_2,*SLOT8_1,*SLOT8_2;
 224
 225 static INT32 outd[1];
 226 static INT32 ams;
 227 static INT32 vib;
 228 INT32  *ams_table;
 229 INT32  *vib_table;
 230 static INT32 amsIncr;
 231 static INT32 vibIncr;
 232 static INT32 feedback2;         /* connect for SLOT 2 */
 233
 234 /* log output level */
 235 #define LOG_ERR  3      /* ERROR       */
 236 #define LOG_WAR  2      /* WARNING     */
 237 #define LOG_INF  1      /* INFORMATION */
 238
 239 //#define LOG_LEVEL LOG_INF
 240 #define LOG_LEVEL       LOG_ERR
 241
 242 //#define LOG(n,x) if( (n)>=LOG_LEVEL ) logerror x
 243 #define LOG(n,x)
 244
 245 /* --------------------- subroutines  --------------------- */
 246
 247 INLINE int Limit( int val, int max, int min ) {
 248         if ( val > max )
 249                 val = max;
 250         else if ( val < min )
 251                 val = min;
 252
 253         return val;
 254 }
 255
 256 /* status set and IRQ handling */
 257 INLINE void OPL_STATUS_SET(FM_OPL *OPL,int flag)
 258 {
 259         /* set status flag */
 260         OPL->status |= flag;
 261         if(!(OPL->status & 0x80))
 262         {
 263                 if(OPL->status & OPL->statusmask)
 264                 {       /* IRQ on */
 265                         OPL->status |= 0x80;
 266                         /* callback user interrupt handler (IRQ is OFF to ON) */
 267                         if(OPL->IRQHandler) (OPL->IRQHandler)(OPL->IRQParam,1);
 268                 }
 269         }
 270 }
 271
 272 /* status reset and IRQ handling */
 273 INLINE void OPL_STATUS_RESET(FM_OPL *OPL,int flag)
 274 {
 275         /* reset status flag */
 276         OPL->status &=~flag;
 277         if((OPL->status & 0x80))
 278         {
 279                 if (!(OPL->status & OPL->statusmask) )
 280                 {
 281                         OPL->status &= 0x7f;
 282                         /* callback user interrupt handler (IRQ is ON to OFF) */
 283                         if(OPL->IRQHandler) (OPL->IRQHandler)(OPL->IRQParam,0);
 284                 }
 285         }
 286 }
 287
 288 /* IRQ mask set */
 289 INLINE void OPL_STATUSMASK_SET(FM_OPL *OPL,int flag)
 290 {
 291         OPL->statusmask = flag;
 292         /* IRQ handling check */
 293         OPL_STATUS_SET(OPL,0);
 294         OPL_STATUS_RESET(OPL,0);
 295 }
 296
 297 /* ----- key on  ----- */
 298 INLINE void OPL_KEYON(OPL_SLOT *SLOT)
 299 {
 300         /* sin wave restart */
 301         SLOT->Cnt = 0;
 302         /* set attack */
 303         SLOT->evm = ENV_MOD_AR;
 304         SLOT->evs = SLOT->evsa;
 305         SLOT->evc = EG_AST;
 306         SLOT->eve = EG_AED;
 307 }
 308 /* ----- key off ----- */
 309 INLINE void OPL_KEYOFF(OPL_SLOT *SLOT)
 310 {
 311         if( SLOT->evm > ENV_MOD_RR)
 312         {
 313                 /* set envelope counter from envleope output */
 314                 SLOT->evm = ENV_MOD_RR;
 315                 if( !(SLOT->evc&EG_DST) )
 316                         //SLOT->evc = (ENV_CURVE[SLOT->evc>>ENV_BITS]<<ENV_BITS) + EG_DST;
 317                         SLOT->evc = EG_DST;
 318                 SLOT->eve = EG_DED;
 319                 SLOT->evs = SLOT->evsr;
 320         }
 321 }
 322
 323 /* ---------- calcrate Envelope Generator & Phase Generator ---------- */
 324 /* return : envelope output */
 325 INLINE UINT32 OPL_CALC_SLOT( OPL_SLOT *SLOT )
 326 {
 327         /* calcrate envelope generator */
 328         if( (SLOT->evc+=SLOT->evs) >= SLOT->eve )
 329         {
 330                 switch( SLOT->evm ){
 331                 case ENV_MOD_AR: /* ATTACK -> DECAY1 */
 332                         /* next DR */
 333                         SLOT->evm = ENV_MOD_DR;
 334                         SLOT->evc = EG_DST;
 335                         SLOT->eve = SLOT->SL;
 336                         SLOT->evs = SLOT->evsd;
 337                         break;
 338                 case ENV_MOD_DR: /* DECAY -> SL or RR */
 339                         SLOT->evc = SLOT->SL;
 340                         SLOT->eve = EG_DED;
 341                         if(SLOT->eg_typ)
 342                         {
 343                                 SLOT->evs = 0;
 344                         }
 345                         else
 346                         {
 347                                 SLOT->evm = ENV_MOD_RR;
 348                                 SLOT->evs = SLOT->evsr;
 349                         }
 350                         break;
 351                 case ENV_MOD_RR: /* RR -> OFF */
 352                         SLOT->evc = EG_OFF;
 353                         SLOT->eve = EG_OFF+1;
 354                         SLOT->evs = 0;
 355                         break;
 356                 }
 357         }
 358         /* calcrate envelope */
 359         return SLOT->TLL+ENV_CURVE[SLOT->evc>>ENV_BITS]+(SLOT->ams ? ams : 0);
 360 }
 361
 362 /* set algorythm connection */
 363 static void set_algorythm( OPL_CH *CH)
 364 {
 365         INT32 *carrier = &outd[0];
 366         CH->connect1 = CH->CON ? carrier : &feedback2;
 367         CH->connect2 = carrier;
 368 }
 369
 370 /* ---------- frequency counter for operater update ---------- */
 371 INLINE void CALC_FCSLOT(OPL_CH *CH,OPL_SLOT *SLOT)
 372 {
 373         int ksr;
 374
 375         /* frequency step counter */
 376         SLOT->Incr = CH->fc * SLOT->mul;
 377         ksr = CH->kcode >> SLOT->KSR;
 378
 379         if( SLOT->ksr != ksr )
 380         {
 381                 SLOT->ksr = ksr;
 382                 /* attack , decay rate recalcration */
 383                 SLOT->evsa = SLOT->AR[ksr];
 384                 SLOT->evsd = SLOT->DR[ksr];
 385                 SLOT->evsr = SLOT->RR[ksr];
 386         }
 387         SLOT->TLL = SLOT->TL + (CH->ksl_base>>SLOT->ksl);
 388 }
 389
 390 /* set multi,am,vib,EG-TYP,KSR,mul */
 391 INLINE void set_mul(FM_OPL *OPL,int slot,int v)
 392 {
 393         OPL_CH   *CH   = &OPL->P_CH[slot/2];
 394         OPL_SLOT *SLOT = &CH->SLOT[slot&1];
 395
 396         SLOT->mul    = MUL_TABLE[v&0x0f];
 397         SLOT->KSR    = (v&0x10) ? 0 : 2;
 398         SLOT->eg_typ = (v&0x20)>>5;
 399         SLOT->vib    = (v&0x40);
 400         SLOT->ams    = (v&0x80);
 401         CALC_FCSLOT(CH,SLOT);
 402 }
 403
 404 /* set ksl & tl */
 405 INLINE void set_ksl_tl(FM_OPL *OPL,int slot,int v)
 406 {
 407         OPL_CH   *CH   = &OPL->P_CH[slot/2];
 408         OPL_SLOT *SLOT = &CH->SLOT[slot&1];
 409         int ksl = v>>6; /* 0 / 1.5 / 3 / 6 db/OCT */
 410
 411         SLOT->ksl = ksl ? 3-ksl : 31;
 412         SLOT->TL  = (v&0x3f)*(0.75/EG_STEP); /* 0.75db step */
 413
 414         if( !(OPL->mode&0x80) )
 415         {       /* not CSM latch total level */
 416                 SLOT->TLL = SLOT->TL + (CH->ksl_base>>SLOT->ksl);
 417         }
 418 }
 419
 420 /* set attack rate & decay rate  */
 421 INLINE void set_ar_dr(FM_OPL *OPL,int slot,int v)
 422 {
 423         OPL_CH   *CH   = &OPL->P_CH[slot/2];
 424         OPL_SLOT *SLOT = &CH->SLOT[slot&1];
 425         int ar = v>>4;
 426         int dr = v&0x0f;
 427
 428         SLOT->AR = ar ? &OPL->AR_TABLE[ar<<2] : RATE_0;
 429         SLOT->evsa = SLOT->AR[SLOT->ksr];
 430         if( SLOT->evm == ENV_MOD_AR ) SLOT->evs = SLOT->evsa;
 431
 432         SLOT->DR = dr ? &OPL->DR_TABLE[dr<<2] : RATE_0;
 433         SLOT->evsd = SLOT->DR[SLOT->ksr];
 434         if( SLOT->evm == ENV_MOD_DR ) SLOT->evs = SLOT->evsd;
 435 }
 436
 437 /* set sustain level & release rate */
 438 INLINE void set_sl_rr(FM_OPL *OPL,int slot,int v)
 439 {
 440         OPL_CH   *CH   = &OPL->P_CH[slot/2];
 441         OPL_SLOT *SLOT = &CH->SLOT[slot&1];
 442         int sl = v>>4;
 443         int rr = v & 0x0f;
 444
 445         SLOT->SL = SL_TABLE[sl];
 446         if( SLOT->evm == ENV_MOD_DR ) SLOT->eve = SLOT->SL;
 447         SLOT->RR = &OPL->DR_TABLE[rr<<2];
 448         SLOT->evsr = SLOT->RR[SLOT->ksr];
 449         if( SLOT->evm == ENV_MOD_RR ) SLOT->evs = SLOT->evsr;
 450 }
 451
 452 /* operator output calcrator */
 453 #define OP_OUT(slot,env,con)   slot->wavetable[((slot->Cnt+con)/(0x1000000/SIN_ENT))&(SIN_ENT-1)][env]
 454 /* ---------- calcrate one of channel ---------- */
 455 INLINE void OPL_CALC_CH( OPL_CH *CH )
 456 {
 457         UINT32 env_out;
 458         OPL_SLOT *SLOT;
 459
 460         feedback2 = 0;
 461         /* SLOT 1 */
 462         SLOT = &CH->SLOT[SLOT1];
 463         env_out=OPL_CALC_SLOT(SLOT);
 464         if( env_out < EG_ENT-1 )
 465         {
 466                 /* PG */
 467                 if(SLOT->vib) SLOT->Cnt += (SLOT->Incr*vib/VIB_RATE);
 468                 else          SLOT->Cnt += SLOT->Incr;
 469                 /* connectoion */
 470                 if(CH->FB)
 471                 {
 472                         int feedback1 = (CH->op1_out[0]+CH->op1_out[1])>>CH->FB;
 473                         CH->op1_out[1] = CH->op1_out[0];
 474                         *CH->connect1 += CH->op1_out[0] = OP_OUT(SLOT,env_out,feedback1);
 475                 }
 476                 else
 477                 {
 478                         *CH->connect1 += OP_OUT(SLOT,env_out,0);
 479                 }
 480         }else
 481         {
 482                 CH->op1_out[1] = CH->op1_out[0];
 483                 CH->op1_out[0] = 0;
 484         }
 485         /* SLOT 2 */
 486         SLOT = &CH->SLOT[SLOT2];
 487         env_out=OPL_CALC_SLOT(SLOT);
 488         if( env_out < EG_ENT-1 )
 489         {
 490                 /* PG */
 491                 if(SLOT->vib) SLOT->Cnt += (SLOT->Incr*vib/VIB_RATE);
 492                 else          SLOT->Cnt += SLOT->Incr;
 493                 /* connectoion */
 494                 outd[0] += OP_OUT(SLOT,env_out, feedback2);
 495         }
 496 }
 497
 498 /* ---------- calcrate rythm block ---------- */
 499 #define WHITE_NOISE_db 6.0
 500 INLINE void OPL_CALC_RH( OPL_CH *CH )
 501 {
 502         UINT32 env_tam,env_sd,env_top,env_hh;
 503         int whitenoise = (rand()&1)*(WHITE_NOISE_db/EG_STEP);
 504         INT32 tone8;
 505
 506         OPL_SLOT *SLOT;
 507         int env_out;
 508
 509         /* BD : same as FM serial mode and output level is large */
 510         feedback2 = 0;
 511         /* SLOT 1 */
 512         SLOT = &CH[6].SLOT[SLOT1];
 513         env_out=OPL_CALC_SLOT(SLOT);
 514         if( env_out < EG_ENT-1 )
 515         {
 516                 /* PG */
 517                 if(SLOT->vib) SLOT->Cnt += (SLOT->Incr*vib/VIB_RATE);
 518                 else          SLOT->Cnt += SLOT->Incr;
 519                 /* connectoion */
 520                 if(CH[6].FB)
 521                 {
 522                         int feedback1 = (CH[6].op1_out[0]+CH[6].op1_out[1])>>CH[6].FB;
 523                         CH[6].op1_out[1] = CH[6].op1_out[0];
 524                         feedback2 = CH[6].op1_out[0] = OP_OUT(SLOT,env_out,feedback1);
 525                 }
 526                 else
 527                 {
 528                         feedback2 = OP_OUT(SLOT,env_out,0);
 529                 }
 530         }else
 531         {
 532                 feedback2 = 0;
 533                 CH[6].op1_out[1] = CH[6].op1_out[0];
 534                 CH[6].op1_out[0] = 0;
 535         }
 536         /* SLOT 2 */
 537         SLOT = &CH[6].SLOT[SLOT2];
 538         env_out=OPL_CALC_SLOT(SLOT);
 539         if( env_out < EG_ENT-1 )
 540         {
 541                 /* PG */
 542                 if(SLOT->vib) SLOT->Cnt += (SLOT->Incr*vib/VIB_RATE);
 543                 else          SLOT->Cnt += SLOT->Incr;
 544                 /* connectoion */
 545                 outd[0] += OP_OUT(SLOT,env_out, feedback2)*2;
 546         }
 547
 548         // SD  (17) = mul14[fnum7] + white noise
 549         // TAM (15) = mul15[fnum8]
 550         // TOP (18) = fnum6(mul18[fnum8]+whitenoise)
 551         // HH  (14) = fnum7(mul18[fnum8]+whitenoise) + white noise
 552         env_sd =OPL_CALC_SLOT(SLOT7_2) + whitenoise;
 553         env_tam=OPL_CALC_SLOT(SLOT8_1);
 554         env_top=OPL_CALC_SLOT(SLOT8_2);
 555         env_hh =OPL_CALC_SLOT(SLOT7_1) + whitenoise;
 556
 557         /* PG */
 558         if(SLOT7_1->vib) SLOT7_1->Cnt += (2*SLOT7_1->Incr*vib/VIB_RATE);
 559         else             SLOT7_1->Cnt += 2*SLOT7_1->Incr;
 560         if(SLOT7_2->vib) SLOT7_2->Cnt += ((CH[7].fc*8)*vib/VIB_RATE);
 561         else             SLOT7_2->Cnt += (CH[7].fc*8);
 562         if(SLOT8_1->vib) SLOT8_1->Cnt += (SLOT8_1->Incr*vib/VIB_RATE);
 563         else             SLOT8_1->Cnt += SLOT8_1->Incr;
 564         if(SLOT8_2->vib) SLOT8_2->Cnt += ((CH[8].fc*48)*vib/VIB_RATE);
 565         else             SLOT8_2->Cnt += (CH[8].fc*48);
 566
 567         tone8 = OP_OUT(SLOT8_2,whitenoise,0 );
 568
 569         /* SD */
 570         if( env_sd < EG_ENT-1 )
 571                 outd[0] += OP_OUT(SLOT7_1,env_sd, 0)*8;
 572         /* TAM */
 573         if( env_tam < EG_ENT-1 )
 574                 outd[0] += OP_OUT(SLOT8_1,env_tam, 0)*2;
 575         /* TOP-CY */
 576         if( env_top < EG_ENT-1 )
 577                 outd[0] += OP_OUT(SLOT7_2,env_top,tone8)*2;
 578         /* HH */
 579         if( env_hh  < EG_ENT-1 )
 580                 outd[0] += OP_OUT(SLOT7_2,env_hh,tone8)*2;
 581 }
 582
 583 /* ----------- initialize time tabls ----------- */
 584 static void init_timetables( FM_OPL *OPL , int ARRATE , int DRRATE )
 585 {
 586         int i;
 587         double rate;
 588
 589         /* make attack rate & decay rate tables */
 590         for (i = 0;i < 4;i++) OPL->AR_TABLE[i] = OPL->DR_TABLE[i] = 0;
 591         for (i = 4;i <= 60;i++){
 592                 rate  = OPL->freqbase;                                          /* frequency rate */
 593                 if( i < 60 ) rate *= 1.0+(i&3)*0.25;            /* b0-1 : x1 , x1.25 , x1.5 , x1.75 */
 594                 rate *= 1<<((i>>2)-1);                                          /* b2-5 : shift bit */
 595                 rate *= (double)(EG_ENT<<ENV_BITS);
 596                 OPL->AR_TABLE[i] = rate / ARRATE;
 597                 OPL->DR_TABLE[i] = rate / DRRATE;
 598         }
 599         for (i = 60;i < 76;i++)
 600         {
 601                 OPL->AR_TABLE[i] = EG_AED-1;
 602                 OPL->DR_TABLE[i] = OPL->DR_TABLE[60];
 603         }
 604 #if 0
 605         for (i = 0;i < 64 ;i++){        /* make for overflow area */
 606                 LOG(LOG_WAR,("rate %2d , ar %f ms , dr %f ms \n",i,
 607                         ((double)(EG_ENT<<ENV_BITS) / OPL->AR_TABLE[i]) * (1000.0 / OPL->rate),
 608                         ((double)(EG_ENT<<ENV_BITS) / OPL->DR_TABLE[i]) * (1000.0 / OPL->rate) ));
 609         }
 610 #endif
 611 }
 612
 613 /* ---------- generic table initialize ---------- */
 614 static int OPLOpenTable( void )
 615 {
 616         int s,t;
 617         double rate;
 618         int i,j;
 619         double pom;
 620
 621         /* allocate dynamic tables */
 622         if( (TL_TABLE = malloc(TL_MAX*2*sizeof(INT32))) == NULL)
 623                 return 0;
 624         if( (SIN_TABLE = malloc(SIN_ENT*4 *sizeof(INT32 *))) == NULL)
 625         {
 626                 free(TL_TABLE);
 627                 return 0;
 628         }
 629         if( (AMS_TABLE = malloc(AMS_ENT*2 *sizeof(INT32))) == NULL)
 630         {
 631                 free(TL_TABLE);
 632                 free(SIN_TABLE);
 633                 return 0;
 634         }
 635         if( (VIB_TABLE = malloc(VIB_ENT*2 *sizeof(INT32))) == NULL)
 636         {
 637                 free(TL_TABLE);
 638                 free(SIN_TABLE);
 639                 free(AMS_TABLE);
 640                 return 0;
 641         }
 642         /* make total level table */
 643         for (t = 0;t < EG_ENT-1 ;t++){
 644                 rate = ((1<<TL_BITS)-1)/pow(10,EG_STEP*t/20);   /* dB -> voltage */
 645                 TL_TABLE[       t] =  (int)rate;
 646                 TL_TABLE[TL_MAX+t] = -TL_TABLE[t];
 647 /*              LOG(LOG_INF,("TotalLevel(%3d) = %x\n",t,TL_TABLE[t]));*/
 648         }
 649         /* fill volume off area */
 650         for ( t = EG_ENT-1; t < TL_MAX ;t++){
 651                 TL_TABLE[t] = TL_TABLE[TL_MAX+t] = 0;
 652         }
 653
 654         /* make sinwave table (total level offet) */
 655         /* degree 0 = degree 180                   = off */
 656         SIN_TABLE[0] = SIN_TABLE[SIN_ENT/2]         = &TL_TABLE[EG_ENT-1];
 657         for (s = 1;s <= SIN_ENT/4;s++){
 658                 pom = sin(2*PI*s/SIN_ENT); /* sin     */
 659                 pom = 20*log10(1/pom);     /* decibel */
 660                 j = pom / EG_STEP;         /* TL_TABLE steps */
 661
 662         /* degree 0   -  90    , degree 180 -  90 : plus section */
 663                 SIN_TABLE[          s] = SIN_TABLE[SIN_ENT/2-s] = &TL_TABLE[j];
 664         /* degree 180 - 270    , degree 360 - 270 : minus section */
 665                 SIN_TABLE[SIN_ENT/2+s] = SIN_TABLE[SIN_ENT  -s] = &TL_TABLE[TL_MAX+j];
 666 /*              LOG(LOG_INF,("sin(%3d) = %f:%f db\n",s,pom,(double)j * EG_STEP));*/
 667         }
 668         for (s = 0;s < SIN_ENT;s++)
 669         {
 670                 SIN_TABLE[SIN_ENT*1+s] = s<(SIN_ENT/2) ? SIN_TABLE[s] : &TL_TABLE[EG_ENT];
 671                 SIN_TABLE[SIN_ENT*2+s] = SIN_TABLE[s % (SIN_ENT/2)];
 672                 SIN_TABLE[SIN_ENT*3+s] = (s/(SIN_ENT/4))&1 ? &TL_TABLE[EG_ENT] : SIN_TABLE[SIN_ENT*2+s];
 673         }
 674
 675         /* envelope counter -> envelope output table */
 676         for (i=0; i<EG_ENT; i++)
 677         {
 678                 /* ATTACK curve */
 679                 pom = pow( ((double)(EG_ENT-1-i)/EG_ENT) , 8 ) * EG_ENT;
 680                 /* if( pom >= EG_ENT ) pom = EG_ENT-1; */
 681                 ENV_CURVE[i] = (int)pom;
 682                 /* DECAY ,RELEASE curve */
 683                 ENV_CURVE[(EG_DST>>ENV_BITS)+i]= i;
 684         }
 685         /* off */
 686         ENV_CURVE[EG_OFF>>ENV_BITS]= EG_ENT-1;
 687         /* make LFO ams table */
 688         for (i=0; i<AMS_ENT; i++)
 689         {
 690                 pom = (1.0+sin(2*PI*i/AMS_ENT))/2; /* sin */
 691                 AMS_TABLE[i]         = (1.0/EG_STEP)*pom; /* 1dB   */
 692                 AMS_TABLE[AMS_ENT+i] = (4.8/EG_STEP)*pom; /* 4.8dB */
 693         }
 694         /* make LFO vibrate table */
 695         for (i=0; i<VIB_ENT; i++)
 696         {
 697                 /* 100cent = 1seminote = 6% ?? */
 698                 pom = (double)VIB_RATE*0.06*sin(2*PI*i/VIB_ENT); /* +-100sect step */
 699                 VIB_TABLE[i]         = VIB_RATE + (pom*0.07); /* +- 7cent */
 700                 VIB_TABLE[VIB_ENT+i] = VIB_RATE + (pom*0.14); /* +-14cent */
 701                 /* LOG(LOG_INF,("vib %d=%d\n",i,VIB_TABLE[VIB_ENT+i])); */
 702         }
 703         return 1;
 704 }
 705
 706
 707 static void OPLCloseTable( void )
 708 {
 709         free(TL_TABLE);
 710         free(SIN_TABLE);
 711         free(AMS_TABLE);
 712         free(VIB_TABLE);
 713 }
 714
 715 /* CSM Key Controll */
 716 INLINE void CSMKeyControll(OPL_CH *CH)
 717 {
 718         OPL_SLOT *slot1 = &CH->SLOT[SLOT1];
 719         OPL_SLOT *slot2 = &CH->SLOT[SLOT2];
 720         /* all key off */
 721         OPL_KEYOFF(slot1);
 722         OPL_KEYOFF(slot2);
 723         /* total level latch */
 724         slot1->TLL = slot1->TL + (CH->ksl_base>>slot1->ksl);
 725         slot1->TLL = slot1->TL + (CH->ksl_base>>slot1->ksl);
 726         /* key on */
 727         CH->op1_out[0] = CH->op1_out[1] = 0;
 728         OPL_KEYON(slot1);
 729         OPL_KEYON(slot2);
 730 }
 731
 732 /* ---------- opl initialize ---------- */
 733 static void OPL_initalize(FM_OPL *OPL)
 734 {
 735         int fn;
 736
 737         /* frequency base */
 738         OPL->freqbase = (OPL->rate) ? ((double)OPL->clock / OPL->rate) / 72  : 0;
 739         /* Timer base time */
 740         OPL->TimerBase = 1.0/((double)OPL->clock / 72.0 );
 741         /* make time tables */
 742         init_timetables( OPL , OPL_ARRATE , OPL_DRRATE );
 743         /* make fnumber -> increment counter table */
 744         for( fn=0 ; fn < 1024 ; fn++ )
 745         {
 746                 OPL->FN_TABLE[fn] = OPL->freqbase * fn * FREQ_RATE * (1<<7) / 2;
 747         }
 748         /* LFO freq.table */
 749         OPL->amsIncr = OPL->rate ? (double)AMS_ENT*(1<<AMS_SHIFT) / OPL->rate * 3.7 * ((double)OPL->clock/3600000) : 0;
 750         OPL->vibIncr = OPL->rate ? (double)VIB_ENT*(1<<VIB_SHIFT) / OPL->rate * 6.4 * ((double)OPL->clock/3600000) : 0;
 751 }
 752
 753 /* ---------- write a OPL registers ---------- */
 754 static void OPLWriteReg(FM_OPL *OPL, int r, int v)
 755 {
 756         OPL_CH *CH;
 757         int slot;
 758         int block_fnum;
 759
 760         switch(r&0xe0)
 761         {
 762         case 0x00: /* 00-1f:controll */
 763                 switch(r&0x1f)
 764                 {
 765                 case 0x01:
 766                         /* wave selector enable */
 767                         if(OPL->type&OPL_TYPE_WAVESEL)
 768                         {
 769                                 OPL->wavesel = v&0x20;
 770                                 if(!OPL->wavesel)
 771                                 {
 772                                         /* preset compatible mode */
 773                                         int c;
 774                                         for(c=0;c<OPL->max_ch;c++)
 775                                         {
 776                                                 OPL->P_CH[c].SLOT[SLOT1].wavetable = &SIN_TABLE[0];
 777                                                 OPL->P_CH[c].SLOT[SLOT2].wavetable = &SIN_TABLE[0];
 778                                         }
 779                                 }
 780                         }
 781                         return;
 782                 case 0x02:      /* Timer 1 */
 783                         OPL->T[0] = (256-v)*4;
 784                         break;
 785                 case 0x03:      /* Timer 2 */
 786                         OPL->T[1] = (256-v)*16;
 787                         return;
 788                 case 0x04:      /* IRQ clear / mask and Timer enable */
 789                         if(v&0x80)
 790                         {       /* IRQ flag clear */
 791                                 OPL_STATUS_RESET(OPL,0x7f);
 792                         }
 793                         else
 794                         {       /* set IRQ mask ,timer enable*/
 795                                 UINT8 st1 = v&1;
 796                                 UINT8 st2 = (v>>1)&1;
 797                                 /* IRQRST,T1MSK,t2MSK,EOSMSK,BRMSK,x,ST2,ST1 */
 798                                 OPL_STATUS_RESET(OPL,v&0x78);
 799                                 OPL_STATUSMASK_SET(OPL,((~v)&0x78)|0x01);
 800                                 /* timer 2 */
 801                                 if(OPL->st[1] != st2)
 802                                 {
 803                                         double interval = st2 ? (double)OPL->T[1]*OPL->TimerBase : 0.0;
 804                                         OPL->st[1] = st2;
 805                                         if (OPL->TimerHandler) (OPL->TimerHandler)(OPL->TimerParam+1,interval);
 806                                 }
 807                                 /* timer 1 */
 808                                 if(OPL->st[0] != st1)
 809                                 {
 810                                         double interval = st1 ? (double)OPL->T[0]*OPL->TimerBase : 0.0;
 811                                         OPL->st[0] = st1;
 812                                         if (OPL->TimerHandler) (OPL->TimerHandler)(OPL->TimerParam+0,interval);
 813                                 }
 814                         }
 815                         return;
 816 #if BUILD_Y8950
 817                 case 0x06:              /* Key Board OUT */
 818                         if(OPL->type&OPL_TYPE_KEYBOARD)
 819                         {
 820                                 if(OPL->keyboardhandler_w)
 821                                         OPL->keyboardhandler_w(OPL->keyboard_param,v);
 822                                 else
 823                                         LOG(LOG_WAR,("OPL:write unmapped KEYBOARD port\n"));
 824                         }
 825                         return;
 826                 case 0x07:      /* DELTA-T controll : START,REC,MEMDATA,REPT,SPOFF,x,x,RST */
 827                         if(OPL->type&OPL_TYPE_ADPCM)
 828                                 YM_DELTAT_ADPCM_Write(OPL->deltat,r-0x07,v);
 829                         return;
 830                 case 0x08:      /* MODE,DELTA-T : CSM,NOTESEL,x,x,smpl,da/ad,64k,rom */
 831                         OPL->mode = v;
 832                         v&=0x1f;        /* for DELTA-T unit */
 833                 case 0x09:              /* START ADD */
 834                 case 0x0a:
 835                 case 0x0b:              /* STOP ADD  */
 836                 case 0x0c:
 837                 case 0x0d:              /* PRESCALE   */
 838                 case 0x0e:
 839                 case 0x0f:              /* ADPCM data */
 840                 case 0x10:              /* DELTA-N    */
 841                 case 0x11:              /* DELTA-N    */
 842                 case 0x12:              /* EG-CTRL    */
 843                         if(OPL->type&OPL_TYPE_ADPCM)
 844                                 YM_DELTAT_ADPCM_Write(OPL->deltat,r-0x07,v);
 845                         return;
 846 #if 0
 847                 case 0x15:              /* DAC data    */
 848                 case 0x16:
 849                 case 0x17:              /* SHIFT    */
 850                         return;
 851                 case 0x18:              /* I/O CTRL (Direction) */
 852                         if(OPL->type&OPL_TYPE_IO)
 853                                 OPL->portDirection = v&0x0f;
 854                         return;
 855                 case 0x19:              /* I/O DATA */
 856                         if(OPL->type&OPL_TYPE_IO)
 857                         {
 858                                 OPL->portLatch = v;
 859                                 if(OPL->porthandler_w)
 860                                         OPL->porthandler_w(OPL->port_param,v&OPL->portDirection);
 861                         }
 862                         return;
 863                 case 0x1a:              /* PCM data */
 864                         return;
 865 #endif
 866 #endif
 867                 }
 868                 break;
 869         case 0x20:      /* am,vib,ksr,eg type,mul */
 870                 slot = slot_array[r&0x1f];
 871                 if(slot == -1) return;
 872                 set_mul(OPL,slot,v);
 873                 return;
 874         case 0x40:
 875                 slot = slot_array[r&0x1f];
 876                 if(slot == -1) return;
 877                 set_ksl_tl(OPL,slot,v);
 878                 return;
 879         case 0x60:
 880                 slot = slot_array[r&0x1f];
 881                 if(slot == -1) return;
 882                 set_ar_dr(OPL,slot,v);
 883                 return;
 884         case 0x80:
 885                 slot = slot_array[r&0x1f];
 886                 if(slot == -1) return;
 887                 set_sl_rr(OPL,slot,v);
 888                 return;
 889         case 0xa0:
 890                 switch(r)
 891                 {
 892                 case 0xbd:
 893                         /* amsep,vibdep,r,bd,sd,tom,tc,hh */
 894                         {
 895                         UINT8 rkey = OPL->rythm^v;
 896                         OPL->ams_table = &AMS_TABLE[v&0x80 ? AMS_ENT : 0];
 897                         OPL->vib_table = &VIB_TABLE[v&0x40 ? VIB_ENT : 0];
 898                         OPL->rythm  = v&0x3f;
 899                         if(OPL->rythm&0x20)
 900                         {
 901 #if 0
 902                                 usrintf_showmessage("OPL Rythm mode select");
 903 #endif
 904                                 /* BD key on/off */
 905                                 if(rkey&0x10)
 906                                 {
 907                                         if(v&0x10)
 908                                         {
 909                                                 OPL->P_CH[6].op1_out[0] = OPL->P_CH[6].op1_out[1] = 0;
 910                                                 OPL_KEYON(&OPL->P_CH[6].SLOT[SLOT1]);
 911                                                 OPL_KEYON(&OPL->P_CH[6].SLOT[SLOT2]);
 912                                         }
 913                                         else
 914                                         {
 915                                                 OPL_KEYOFF(&OPL->P_CH[6].SLOT[SLOT1]);
 916                                                 OPL_KEYOFF(&OPL->P_CH[6].SLOT[SLOT2]);
 917                                         }
 918                                 }
 919                                 /* SD key on/off */
 920                                 if(rkey&0x08)
 921                                 {
 922                                         if(v&0x08) OPL_KEYON(&OPL->P_CH[7].SLOT[SLOT2]);
 923                                         else       OPL_KEYOFF(&OPL->P_CH[7].SLOT[SLOT2]);
 924                                 }/* TAM key on/off */
 925                                 if(rkey&0x04)
 926                                 {
 927                                         if(v&0x04) OPL_KEYON(&OPL->P_CH[8].SLOT[SLOT1]);
 928                                         else       OPL_KEYOFF(&OPL->P_CH[8].SLOT[SLOT1]);
 929                                 }
 930                                 /* TOP-CY key on/off */
 931                                 if(rkey&0x02)
 932                                 {
 933                                         if(v&0x02) OPL_KEYON(&OPL->P_CH[8].SLOT[SLOT2]);
 934                                         else       OPL_KEYOFF(&OPL->P_CH[8].SLOT[SLOT2]);
 935                                 }
 936                                 /* HH key on/off */
 937                                 if(rkey&0x01)
 938                                 {
 939                                         if(v&0x01) OPL_KEYON(&OPL->P_CH[7].SLOT[SLOT1]);
 940                                         else       OPL_KEYOFF(&OPL->P_CH[7].SLOT[SLOT1]);
 941                                 }
 942                         }
 943                         }
 944                         return;
 945                 }
 946                 /* keyon,block,fnum */
 947                 if( (r&0x0f) > 8) return;
 948                 CH = &OPL->P_CH[r&0x0f];
 949                 if(!(r&0x10))
 950                 {       /* a0-a8 */
 951                         block_fnum  = (CH->block_fnum&0x1f00) | v;
 952                 }
 953                 else
 954                 {       /* b0-b8 */
 955                         int keyon = (v>>5)&1;
 956                         block_fnum = ((v&0x1f)<<8) | (CH->block_fnum&0xff);
 957                         if(CH->keyon != keyon)
 958                         {
 959                                 if( (CH->keyon=keyon) )
 960                                 {
 961                                         CH->op1_out[0] = CH->op1_out[1] = 0;
 962                                         OPL_KEYON(&CH->SLOT[SLOT1]);
 963                                         OPL_KEYON(&CH->SLOT[SLOT2]);
 964                                 }
 965                                 else
 966                                 {
 967                                         OPL_KEYOFF(&CH->SLOT[SLOT1]);
 968                                         OPL_KEYOFF(&CH->SLOT[SLOT2]);
 969                                 }
 970                         }
 971                 }
 972                 /* update */
 973                 if(CH->block_fnum != block_fnum)
 974                 {
 975                         int blockRv = 7-(block_fnum>>10);
 976                         int fnum   = block_fnum&0x3ff;
 977                         CH->block_fnum = block_fnum;
 978
 979                         CH->ksl_base = KSL_TABLE[block_fnum>>6];
 980                         CH->fc = OPL->FN_TABLE[fnum]>>blockRv;
 981                         CH->kcode = CH->block_fnum>>9;
 982                         if( (OPL->mode&0x40) && CH->block_fnum&0x100) CH->kcode |=1;
 983                         CALC_FCSLOT(CH,&CH->SLOT[SLOT1]);
 984                         CALC_FCSLOT(CH,&CH->SLOT[SLOT2]);
 985                 }
 986                 return;
 987         case 0xc0:
 988                 /* FB,C */
 989                 if( (r&0x0f) > 8) return;
 990                 CH = &OPL->P_CH[r&0x0f];
 991                 {
 992                 int feedback = (v>>1)&7;
 993                 CH->FB   = feedback ? (8+1) - feedback : 0;
 994                 CH->CON = v&1;
 995                 set_algorythm(CH);
 996                 }
 997                 return;
 998         case 0xe0: /* wave type */
 999                 slot = slot_array[r&0x1f];
1000                 if(slot == -1) return;
1001                 CH = &OPL->P_CH[slot/2];
1002                 if(OPL->wavesel)
1003                 {
1004                         /* LOG(LOG_INF,("OPL SLOT %d wave select %d\n",slot,v&3)); */
1005                         CH->SLOT[slot&1].wavetable = &SIN_TABLE[(v&0x03)*SIN_ENT];
1006                 }
1007                 return;
1008         }
1009 }
1010
1011 /* lock/unlock for common table */
1012 static int OPL_LockTable(void)
1013 {
1014         num_lock++;
1015         if(num_lock>1) return 0;
1016         /* first time */
1017         cur_chip = NULL;
1018         /* allocate total level table (128kb space) */
1019         if( !OPLOpenTable() )
1020         {
1021                 num_lock--;
1022                 return -1;
1023         }
1024         return 0;
1025 }
1026
1027 static void OPL_UnLockTable(void)
1028 {
1029         if(num_lock) num_lock--;
1030         if(num_lock) return;
1031         /* last time */
1032         cur_chip = NULL;
1033         OPLCloseTable();
1034 }
1035
1036 #if (BUILD_YM3812 || BUILD_YM3526)
1037 /*******************************************************************************/
1038 /*              YM3812 local section                                                   */
1039 /*******************************************************************************/
1040
1041 /* ---------- update one of chip ----------- */
1042 void YM3812UpdateOne(FM_OPL *OPL, INT16 *buffer, int length)
1043 {
1044     int i;
1045         int data;
1046         OPLSAMPLE *buf = buffer;
1047         UINT32 amsCnt  = OPL->amsCnt;
1048         UINT32 vibCnt  = OPL->vibCnt;
1049         UINT8 rythm = OPL->rythm&0x20;
1050         OPL_CH *CH,*R_CH;
1051
1052         if( (void *)OPL != cur_chip ){
1053                 cur_chip = (void *)OPL;
1054                 /* channel pointers */
1055                 S_CH = OPL->P_CH;
1056                 E_CH = &S_CH[9];
1057                 /* rythm slot */
1058                 SLOT7_1 = &S_CH[7].SLOT[SLOT1];
1059                 SLOT7_2 = &S_CH[7].SLOT[SLOT2];
1060                 SLOT8_1 = &S_CH[8].SLOT[SLOT1];
1061                 SLOT8_2 = &S_CH[8].SLOT[SLOT2];
1062                 /* LFO state */
1063                 amsIncr = OPL->amsIncr;
1064                 vibIncr = OPL->vibIncr;
1065                 ams_table = OPL->ams_table;
1066                 vib_table = OPL->vib_table;
1067         }
1068         R_CH = rythm ? &S_CH[6] : E_CH;
1069     for( i=0; i < length ; i++ )
1070         {
1071                 /*            channel A         channel B         channel C      */
1072                 /* LFO */
1073                 ams = ams_table[(amsCnt+=amsIncr)>>AMS_SHIFT];
1074                 vib = vib_table[(vibCnt+=vibIncr)>>VIB_SHIFT];
1075                 outd[0] = 0;
1076                 /* FM part */
1077                 for(CH=S_CH ; CH < R_CH ; CH++)
1078                         OPL_CALC_CH(CH);
1079                 /* Rythn part */
1080                 if(rythm)
1081                         OPL_CALC_RH(S_CH);
1082                 /* limit check */
1083                 data = Limit( outd[0] , OPL_MAXOUT, OPL_MINOUT );
1084                 /* store to sound buffer */
1085                 buf[i] = data >> OPL_OUTSB;
1086         }
1087
1088         OPL->amsCnt = amsCnt;
1089         OPL->vibCnt = vibCnt;
1090 #ifdef OPL_OUTPUT_LOG
1091         if(opl_dbg_fp)
1092         {
1093                 for(opl_dbg_chip=0;opl_dbg_chip<opl_dbg_maxchip;opl_dbg_chip++)
1094                         if( opl_dbg_opl[opl_dbg_chip] == OPL) break;
1095                 fprintf(opl_dbg_fp,"%c%c%c",0x20+opl_dbg_chip,length&0xff,length/256);
1096         }
1097 #endif
1098 }
1099 #endif /* (BUILD_YM3812 || BUILD_YM3526) */
1100
1101 #if BUILD_Y8950
1102
1103 void Y8950UpdateOne(FM_OPL *OPL, INT16 *buffer, int length)
1104 {
1105     int i;
1106         int data;
1107         OPLSAMPLE *buf = buffer;
1108         UINT32 amsCnt  = OPL->amsCnt;
1109         UINT32 vibCnt  = OPL->vibCnt;
1110         UINT8 rythm = OPL->rythm&0x20;
1111         OPL_CH *CH,*R_CH;
1112         YM_DELTAT *DELTAT = OPL->deltat;
1113
1114         /* setup DELTA-T unit */
1115         YM_DELTAT_DECODE_PRESET(DELTAT);
1116
1117         if( (void *)OPL != cur_chip ){
1118                 cur_chip = (void *)OPL;
1119                 /* channel pointers */
1120                 S_CH = OPL->P_CH;
1121                 E_CH = &S_CH[9];
1122                 /* rythm slot */
1123                 SLOT7_1 = &S_CH[7].SLOT[SLOT1];
1124                 SLOT7_2 = &S_CH[7].SLOT[SLOT2];
1125                 SLOT8_1 = &S_CH[8].SLOT[SLOT1];
1126                 SLOT8_2 = &S_CH[8].SLOT[SLOT2];
1127                 /* LFO state */
1128                 amsIncr = OPL->amsIncr;
1129                 vibIncr = OPL->vibIncr;
1130                 ams_table = OPL->ams_table;
1131                 vib_table = OPL->vib_table;
1132         }
1133         R_CH = rythm ? &S_CH[6] : E_CH;
1134     for( i=0; i < length ; i++ )
1135         {
1136                 /*            channel A         channel B         channel C      */
1137                 /* LFO */
1138                 ams = ams_table[(amsCnt+=amsIncr)>>AMS_SHIFT];
1139                 vib = vib_table[(vibCnt+=vibIncr)>>VIB_SHIFT];
1140                 outd[0] = 0;
1141                 /* deltaT ADPCM */
1142                 if( DELTAT->portstate )
1143                         YM_DELTAT_ADPCM_CALC(DELTAT);
1144                 /* FM part */
1145                 for(CH=S_CH ; CH < R_CH ; CH++)
1146                         OPL_CALC_CH(CH);
1147                 /* Rythn part */
1148                 if(rythm)
1149                         OPL_CALC_RH(S_CH);
1150                 /* limit check */
1151                 data = Limit( outd[0] , OPL_MAXOUT, OPL_MINOUT );
1152                 /* store to sound buffer */
1153                 buf[i] = data >> OPL_OUTSB;
1154         }
1155         OPL->amsCnt = amsCnt;
1156         OPL->vibCnt = vibCnt;
1157         /* deltaT START flag */
1158         if( !DELTAT->portstate )
1159                 OPL->status &= 0xfe;
1160 }
1161 #endif
1162
1163 /* ---------- reset one of chip ---------- */
1164 void OPLResetChip(FM_OPL *OPL)
1165 {
1166         int c,s;
1167         int i;
1168
1169         /* reset chip */
1170         OPL->mode   = 0;        /* normal mode */
1171         OPL_STATUS_RESET(OPL,0x7f);
1172         /* reset with register write */
1173         OPLWriteReg(OPL,0x01,0); /* wabesel disable */
1174         OPLWriteReg(OPL,0x02,0); /* Timer1 */
1175         OPLWriteReg(OPL,0x03,0); /* Timer2 */
1176         OPLWriteReg(OPL,0x04,0); /* IRQ mask clear */
1177         for(i = 0xff ; i >= 0x20 ; i-- ) OPLWriteReg(OPL,i,0);
1178         /* reset OPerator paramater */
1179         for( c = 0 ; c < OPL->max_ch ; c++ )
1180         {
1181                 OPL_CH *CH = &OPL->P_CH[c];
1182                 /* OPL->P_CH[c].PAN = OPN_CENTER; */
1183                 for(s = 0 ; s < 2 ; s++ )
1184                 {
1185                         /* wave table */
1186                         CH->SLOT[s].wavetable = &SIN_TABLE[0];
1187                         /* CH->SLOT[s].evm = ENV_MOD_RR; */
1188                         CH->SLOT[s].evc = EG_OFF;
1189                         CH->SLOT[s].eve = EG_OFF+1;
1190                         CH->SLOT[s].evs = 0;
1191                 }
1192         }
1193 #if BUILD_Y8950
1194         if(OPL->type&OPL_TYPE_ADPCM)
1195         {
1196                 YM_DELTAT *DELTAT = OPL->deltat;
1197
1198                 DELTAT->freqbase = OPL->freqbase;
1199                 DELTAT->output_pointer = outd;
1200                 DELTAT->portshift = 5;
1201                 DELTAT->output_range = DELTAT_MIXING_LEVEL<<TL_BITS;
1202                 YM_DELTAT_ADPCM_Reset(DELTAT,0);
1203         }
1204 #endif
1205 }
1206
1207 /* ----------  Create one of vietual YM3812 ----------       */
1208 /* 'rate'  is sampling rate and 'bufsiz' is the size of the  */
1209 FM_OPL *OPLCreate(int type, int clock, int rate)
1210 {
1211         char *ptr;
1212         FM_OPL *OPL;
1213         int state_size;
1214         int max_ch = 9; /* normaly 9 channels */
1215
1216         if( OPL_LockTable() ==-1) return NULL;
1217         /* allocate OPL state space */
1218         state_size  = sizeof(FM_OPL);
1219         state_size += sizeof(OPL_CH)*max_ch;
1220 #if BUILD_Y8950
1221         if(type&OPL_TYPE_ADPCM) state_size+= sizeof(YM_DELTAT);
1222 #endif
1223         /* allocate memory block */
1224         ptr = malloc(state_size);
1225         if(ptr==NULL) return NULL;
1226         /* clear */
1227         memset(ptr,0,state_size);
1228         OPL        = (FM_OPL *)ptr; ptr+=sizeof(FM_OPL);
1229         OPL->P_CH  = (OPL_CH *)ptr; ptr+=sizeof(OPL_CH)*max_ch;
1230 #if BUILD_Y8950
1231         if(type&OPL_TYPE_ADPCM) OPL->deltat = (YM_DELTAT *)ptr; ptr+=sizeof(YM_DELTAT);
1232 #endif
1233         /* set channel state pointer */
1234         OPL->type  = type;
1235         OPL->clock = clock;
1236         OPL->rate  = rate;
1237         OPL->max_ch = max_ch;
1238         /* init grobal tables */
1239         OPL_initalize(OPL);
1240         /* reset chip */
1241         OPLResetChip(OPL);
1242 #ifdef OPL_OUTPUT_LOG
1243         if(!opl_dbg_fp)
1244         {
1245                 opl_dbg_fp = fopen("opllog.opl","wb");
1246                 opl_dbg_maxchip = 0;
1247         }
1248         if(opl_dbg_fp)
1249         {
1250                 opl_dbg_opl[opl_dbg_maxchip] = OPL;
1251                 fprintf(opl_dbg_fp,"%c%c%c%c%c%c",0x00+opl_dbg_maxchip,
1252                         type,
1253                         clock&0xff,
1254                         (clock/0x100)&0xff,
1255                         (clock/0x10000)&0xff,
1256                         (clock/0x1000000)&0xff);
1257                 opl_dbg_maxchip++;
1258         }
1259 #endif
1260         return OPL;
1261 }
1262
1263 /* ----------  Destroy one of vietual YM3812 ----------       */
1264 void OPLDestroy(FM_OPL *OPL)
1265 {
1266 #ifdef OPL_OUTPUT_LOG
1267         if(opl_dbg_fp)
1268         {
1269                 fclose(opl_dbg_fp);
1270                 opl_dbg_fp = NULL;
1271         }
1272 #endif
1273         OPL_UnLockTable();
1274         free(OPL);
1275 }
1276
1277 /* ----------  Option handlers ----------       */
1278
1279 void OPLSetTimerHandler(FM_OPL *OPL,OPL_TIMERHANDLER TimerHandler,int channelOffset)
1280 {
1281         OPL->TimerHandler   = TimerHandler;
1282         OPL->TimerParam = channelOffset;
1283 }
1284 void OPLSetIRQHandler(FM_OPL *OPL,OPL_IRQHANDLER IRQHandler,int param)
1285 {
1286         OPL->IRQHandler     = IRQHandler;
1287         OPL->IRQParam = param;
1288 }
1289 void OPLSetUpdateHandler(FM_OPL *OPL,OPL_UPDATEHANDLER UpdateHandler,int param)
1290 {
1291         OPL->UpdateHandler = UpdateHandler;
1292         OPL->UpdateParam = param;
1293 }
1294 #if BUILD_Y8950
1295 void OPLSetPortHandler(FM_OPL *OPL,OPL_PORTHANDLER_W PortHandler_w,OPL_PORTHANDLER_R PortHandler_r,int param)
1296 {
1297         OPL->porthandler_w = PortHandler_w;
1298         OPL->porthandler_r = PortHandler_r;
1299         OPL->port_param = param;
1300 }
1301
1302 void OPLSetKeyboardHandler(FM_OPL *OPL,OPL_PORTHANDLER_W KeyboardHandler_w,OPL_PORTHANDLER_R KeyboardHandler_r,int param)
1303 {
1304         OPL->keyboardhandler_w = KeyboardHandler_w;
1305         OPL->keyboardhandler_r = KeyboardHandler_r;
1306         OPL->keyboard_param = param;
1307 }
1308 #endif
1309 /* ---------- YM3812 I/O interface ---------- */
1310 int OPLWrite(FM_OPL *OPL,int a,int v)
1311 {
1312         if( !(a&1) )
1313         {       /* address port */
1314                 OPL->address = v & 0xff;
1315         }
1316         else
1317         {       /* data port */
1318                 if(OPL->UpdateHandler) OPL->UpdateHandler(OPL->UpdateParam,0);
1319 #ifdef OPL_OUTPUT_LOG
1320         if(opl_dbg_fp)
1321         {
1322                 for(opl_dbg_chip=0;opl_dbg_chip<opl_dbg_maxchip;opl_dbg_chip++)
1323                         if( opl_dbg_opl[opl_dbg_chip] == OPL) break;
1324                 fprintf(opl_dbg_fp,"%c%c%c",0x10+opl_dbg_chip,OPL->address,v);
1325         }
1326 #endif
1327                 OPLWriteReg(OPL,OPL->address,v);
1328         }
1329         return OPL->status>>7;
1330 }
1331
1332 unsigned char OPLRead(FM_OPL *OPL,int a)
1333 {
1334         if( !(a&1) )
1335         {       /* status port */
1336                 return OPL->status & (OPL->statusmask|0x80);
1337         }
1338         /* data port */
1339         switch(OPL->address)
1340         {
1341         case 0x05: /* KeyBoard IN */
1342                 if(OPL->type&OPL_TYPE_KEYBOARD)
1343                 {
1344                         if(OPL->keyboardhandler_r)
1345                                 return OPL->keyboardhandler_r(OPL->keyboard_param);
1346                         else
1347                                 LOG(LOG_WAR,("OPL:read unmapped KEYBOARD port\n"));
1348                 }
1349                 return 0;
1350 #if 0
1351         case 0x0f: /* ADPCM-DATA  */
1352                 return 0;
1353 #endif
1354         case 0x19: /* I/O DATA    */
1355                 if(OPL->type&OPL_TYPE_IO)
1356                 {
1357                         if(OPL->porthandler_r)
1358                                 return OPL->porthandler_r(OPL->port_param);
1359                         else
1360                                 LOG(LOG_WAR,("OPL:read unmapped I/O port\n"));
1361                 }
1362                 return 0;
1363         case 0x1a: /* PCM-DATA    */
1364                 return 0;
1365         }
1366         return 0;
1367 }
1368
1369 int OPLTimerOver(FM_OPL *OPL,int c)
1370 {
1371         if( c )
1372         {       /* Timer B */
1373                 OPL_STATUS_SET(OPL,0x20);
1374         }
1375         else
1376         {       /* Timer A */
1377                 OPL_STATUS_SET(OPL,0x40);
1378                 /* CSM mode key,TL controll */
1379                 if( OPL->mode & 0x80 )
1380                 {       /* CSM mode total level latch and auto key on */
1381                         int ch;
1382                         if(OPL->UpdateHandler) OPL->UpdateHandler(OPL->UpdateParam,0);
1383                         for(ch=0;ch<9;ch++)
1384                                 CSMKeyControll( &OPL->P_CH[ch] );
1385                 }
1386         }
1387         /* reload timer */
1388         if (OPL->TimerHandler) (OPL->TimerHandler)(OPL->TimerParam+c,(double)OPL->T[c]*OPL->TimerBase);
1389         return OPL->status>>7;
1390 }