target-ppc: update nip before calling an helper in FP instructions
[qemu/mini2440.git] / hw / mcf_intc.c
blob4e99aeb4fcb0a13403d314573f1efead34fbb05a
1 /*
2 * ColdFire Interrupt Controller emulation.
4 * Copyright (c) 2007 CodeSourcery.
6 * This code is licenced under the GPL
7 */
8 #include "hw.h"
9 #include "mcf.h"
11 typedef struct {
12 uint64_t ipr;
13 uint64_t imr;
14 uint64_t ifr;
15 uint64_t enabled;
16 uint8_t icr[64];
17 CPUState *env;
18 int active_vector;
19 } mcf_intc_state;
21 static void mcf_intc_update(mcf_intc_state *s)
23 uint64_t active;
24 int i;
25 int best;
26 int best_level;
28 active = (s->ipr | s->ifr) & s->enabled & ~s->imr;
29 best_level = 0;
30 best = 64;
31 if (active) {
32 for (i = 0; i < 64; i++) {
33 if ((active & 1) != 0 && s->icr[i] >= best_level) {
34 best_level = s->icr[i];
35 best = i;
37 active >>= 1;
40 s->active_vector = ((best == 64) ? 24 : (best + 64));
41 m68k_set_irq_level(s->env, best_level, s->active_vector);
44 static uint32_t mcf_intc_read(void *opaque, target_phys_addr_t addr)
46 int offset;
47 mcf_intc_state *s = (mcf_intc_state *)opaque;
48 offset = addr & 0xff;
49 if (offset >= 0x40 && offset < 0x80) {
50 return s->icr[offset - 0x40];
52 switch (offset) {
53 case 0x00:
54 return (uint32_t)(s->ipr >> 32);
55 case 0x04:
56 return (uint32_t)s->ipr;
57 case 0x08:
58 return (uint32_t)(s->imr >> 32);
59 case 0x0c:
60 return (uint32_t)s->imr;
61 case 0x10:
62 return (uint32_t)(s->ifr >> 32);
63 case 0x14:
64 return (uint32_t)s->ifr;
65 case 0xe0: /* SWIACK. */
66 return s->active_vector;
67 case 0xe1: case 0xe2: case 0xe3: case 0xe4:
68 case 0xe5: case 0xe6: case 0xe7:
69 /* LnIACK */
70 cpu_abort(cpu_single_env, "mcf_intc_read: LnIACK not implemented\n");
71 default:
72 return 0;
76 static void mcf_intc_write(void *opaque, target_phys_addr_t addr, uint32_t val)
78 int offset;
79 mcf_intc_state *s = (mcf_intc_state *)opaque;
80 offset = addr & 0xff;
81 if (offset >= 0x40 && offset < 0x80) {
82 int n = offset - 0x40;
83 s->icr[n] = val;
84 if (val == 0)
85 s->enabled &= ~(1ull << n);
86 else
87 s->enabled |= (1ull << n);
88 mcf_intc_update(s);
89 return;
91 switch (offset) {
92 case 0x00: case 0x04:
93 /* Ignore IPR writes. */
94 return;
95 case 0x08:
96 s->imr = (s->imr & 0xffffffff) | ((uint64_t)val << 32);
97 break;
98 case 0x0c:
99 s->imr = (s->imr & 0xffffffff00000000ull) | (uint32_t)val;
100 break;
101 default:
102 cpu_abort(cpu_single_env, "mcf_intc_write: Bad write offset %d\n",
103 offset);
104 break;
106 mcf_intc_update(s);
109 static void mcf_intc_set_irq(void *opaque, int irq, int level)
111 mcf_intc_state *s = (mcf_intc_state *)opaque;
112 if (irq >= 64)
113 return;
114 if (level)
115 s->ipr |= 1ull << irq;
116 else
117 s->ipr &= ~(1ull << irq);
118 mcf_intc_update(s);
121 static void mcf_intc_reset(mcf_intc_state *s)
123 s->imr = ~0ull;
124 s->ipr = 0;
125 s->ifr = 0;
126 s->enabled = 0;
127 memset(s->icr, 0, 64);
128 s->active_vector = 24;
131 static CPUReadMemoryFunc *mcf_intc_readfn[] = {
132 mcf_intc_read,
133 mcf_intc_read,
134 mcf_intc_read
137 static CPUWriteMemoryFunc *mcf_intc_writefn[] = {
138 mcf_intc_write,
139 mcf_intc_write,
140 mcf_intc_write
143 qemu_irq *mcf_intc_init(target_phys_addr_t base, CPUState *env)
145 mcf_intc_state *s;
146 int iomemtype;
148 s = qemu_mallocz(sizeof(mcf_intc_state));
149 s->env = env;
150 mcf_intc_reset(s);
152 iomemtype = cpu_register_io_memory(0, mcf_intc_readfn,
153 mcf_intc_writefn, s);
154 cpu_register_physical_memory(base, 0x100, iomemtype);
156 return qemu_allocate_irqs(mcf_intc_set_irq, s, 64);