2 * QEMU/MIPS pseudo-board
4 * emulates a simple machine with ISA-like bus.
5 * ISA IO space mapped to the 0x14000000 (PHYS) and
6 * ISA memory at the 0x10000000 (PHYS, 16Mb in size).
7 * All peripherial devices are attached to this "bus" with
8 * the standard PC ISA addresses.
12 #ifdef TARGET_WORDS_BIGENDIAN
13 #define BIOS_FILENAME "mips_bios.bin"
15 #define BIOS_FILENAME "mipsel_bios.bin"
19 #define PHYS_TO_VIRT(x) ((x) | ~0x7fffffffULL)
21 #define PHYS_TO_VIRT(x) ((x) | ~0x7fffffffU)
24 #define VIRT_TO_PHYS_ADDEND (-((int64_t)(int32_t)0x80000000))
26 static const int ide_iobase
[2] = { 0x1f0, 0x170 };
27 static const int ide_iobase2
[2] = { 0x3f6, 0x376 };
28 static const int ide_irq
[2] = { 14, 15 };
30 static int serial_io
[MAX_SERIAL_PORTS
] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
31 static int serial_irq
[MAX_SERIAL_PORTS
] = { 4, 3, 4, 3 };
35 static PITState
*pit
; /* PIT i8254 */
37 /*i8254 PIT is attached to the IRQ0 at PIC i8259 */
39 static void mips_qemu_writel (void *opaque
, target_phys_addr_t addr
,
42 if ((addr
& 0xffff) == 0 && val
== 42)
43 qemu_system_reset_request ();
44 else if ((addr
& 0xffff) == 4 && val
== 42)
45 qemu_system_shutdown_request ();
48 static uint32_t mips_qemu_readl (void *opaque
, target_phys_addr_t addr
)
53 static CPUWriteMemoryFunc
*mips_qemu_write
[] = {
59 static CPUReadMemoryFunc
*mips_qemu_read
[] = {
65 static int mips_qemu_iomemtype
= 0;
67 void load_kernel (CPUState
*env
, int ram_size
, const char *kernel_filename
,
68 const char *kernel_cmdline
,
69 const char *initrd_filename
)
71 int64_t entry
, kernel_low
, kernel_high
;
72 long kernel_size
, initrd_size
;
73 ram_addr_t initrd_offset
;
75 kernel_size
= load_elf(kernel_filename
, VIRT_TO_PHYS_ADDEND
,
76 &entry
, &kernel_low
, &kernel_high
);
77 if (kernel_size
>= 0) {
78 if ((entry
& ~0x7fffffffULL
) == 0x80000000)
79 entry
= (int32_t)entry
;
82 fprintf(stderr
, "qemu: could not load kernel '%s'\n",
90 if (initrd_filename
) {
91 initrd_size
= get_image_size (initrd_filename
);
92 if (initrd_size
> 0) {
93 initrd_offset
= (kernel_high
+ ~TARGET_PAGE_MASK
) & TARGET_PAGE_MASK
;
94 if (initrd_offset
+ initrd_size
> ram_size
) {
96 "qemu: memory too small for initial ram disk '%s'\n",
100 initrd_size
= load_image(initrd_filename
,
101 phys_ram_base
+ initrd_offset
);
103 if (initrd_size
== (target_ulong
) -1) {
104 fprintf(stderr
, "qemu: could not load initial ram disk '%s'\n",
110 /* Store command line. */
111 if (initrd_size
> 0) {
113 ret
= sprintf(phys_ram_base
+ (16 << 20) - 256,
114 "rd_start=0x" TARGET_FMT_lx
" rd_size=%li ",
115 PHYS_TO_VIRT((uint32_t)initrd_offset
),
117 strcpy (phys_ram_base
+ (16 << 20) - 256 + ret
, kernel_cmdline
);
120 strcpy (phys_ram_base
+ (16 << 20) - 256, kernel_cmdline
);
123 *(int32_t *)(phys_ram_base
+ (16 << 20) - 260) = tswap32 (0x12345678);
124 *(int32_t *)(phys_ram_base
+ (16 << 20) - 264) = tswap32 (ram_size
);
127 static void main_cpu_reset(void *opaque
)
129 CPUState
*env
= opaque
;
131 cpu_mips_register(env
, NULL
);
133 if (env
->kernel_filename
)
134 load_kernel (env
, env
->ram_size
, env
->kernel_filename
,
135 env
->kernel_cmdline
, env
->initrd_filename
);
139 void mips_r4k_init (int ram_size
, int vga_ram_size
, int boot_device
,
140 DisplayState
*ds
, const char **fd_filename
, int snapshot
,
141 const char *kernel_filename
, const char *kernel_cmdline
,
142 const char *initrd_filename
, const char *cpu_model
)
145 unsigned long bios_offset
;
154 if (cpu_model
== NULL
) {
161 if (mips_find_by_name(cpu_model
, &def
) != 0)
164 cpu_mips_register(env
, def
);
165 register_savevm("cpu", 0, 3, cpu_save
, cpu_load
, env
);
166 qemu_register_reset(main_cpu_reset
, env
);
169 cpu_register_physical_memory(0, ram_size
, IO_MEM_RAM
);
171 if (!mips_qemu_iomemtype
) {
172 mips_qemu_iomemtype
= cpu_register_io_memory(0, mips_qemu_read
,
173 mips_qemu_write
, NULL
);
175 cpu_register_physical_memory(0x1fbf0000, 0x10000, mips_qemu_iomemtype
);
177 /* Try to load a BIOS image. If this fails, we continue regardless,
178 but initialize the hardware ourselves. When a kernel gets
179 preloaded we also initialize the hardware, since the BIOS wasn't
181 bios_offset
= ram_size
+ vga_ram_size
;
182 snprintf(buf
, sizeof(buf
), "%s/%s", bios_dir
, BIOS_FILENAME
);
183 bios_size
= load_image(buf
, phys_ram_base
+ bios_offset
);
184 if ((bios_size
> 0) && (bios_size
<= BIOS_SIZE
)) {
185 cpu_register_physical_memory(0x1fc00000,
186 BIOS_SIZE
, bios_offset
| IO_MEM_ROM
);
189 fprintf(stderr
, "qemu: Warning, could not load MIPS bios '%s'\n",
193 if (kernel_filename
) {
194 load_kernel (env
, ram_size
, kernel_filename
, kernel_cmdline
,
196 env
->ram_size
= ram_size
;
197 env
->kernel_filename
= kernel_filename
;
198 env
->kernel_cmdline
= kernel_cmdline
;
199 env
->initrd_filename
= initrd_filename
;
202 /* Init CPU internal devices */
203 cpu_mips_irq_init_cpu(env
);
204 cpu_mips_clock_init(env
);
205 cpu_mips_irqctrl_init();
207 /* The PIC is attached to the MIPS CPU INT0 pin */
208 i8259
= i8259_init(env
->irq
[2]);
210 rtc_state
= rtc_init(0x70, i8259
[8]);
212 /* Register 64 KB of ISA IO space at 0x14000000 */
213 isa_mmio_init(0x14000000, 0x00010000);
214 isa_mem_base
= 0x10000000;
216 pit
= pit_init(0x40, i8259
[0]);
218 for(i
= 0; i
< MAX_SERIAL_PORTS
; i
++) {
220 serial_init(serial_io
[i
], i8259
[serial_irq
[i
]], serial_hds
[i
]);
224 isa_vga_init(ds
, phys_ram_base
+ ram_size
, ram_size
,
227 if (nd_table
[0].vlan
) {
228 if (nd_table
[0].model
== NULL
229 || strcmp(nd_table
[0].model
, "ne2k_isa") == 0) {
230 isa_ne2000_init(0x300, i8259
[9], &nd_table
[0]);
231 } else if (strcmp(nd_table
[0].model
, "?") == 0) {
232 fprintf(stderr
, "qemu: Supported NICs: ne2k_isa\n");
235 fprintf(stderr
, "qemu: Unsupported NIC: %s\n", nd_table
[0].model
);
240 for(i
= 0; i
< 2; i
++)
241 isa_ide_init(ide_iobase
[i
], ide_iobase2
[i
], i8259
[ide_irq
[i
]],
242 bs_table
[2 * i
], bs_table
[2 * i
+ 1]);
244 i8042_init(i8259
[1], i8259
[12], 0x60);
245 ds1225y_init(0x9000, "nvram");
248 QEMUMachine mips_machine
= {